W9958
Please keep this instruction sheet for future reference, as it contains important information.
Requires six “AA” (LR6) alkaline batteries (not included).
Adult assembly is required. Tool required: Phillips screwdriver (not included).
Before use, thoroughly wash all parts that may contact food.
fisher-price.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembled Parts
Assembly
Feet
CAUTION
This package contains small parts.
For adult assembly only.
1
• Fit the slot on a foot onto the tab on another foot. Repeat to
connect the other two feet to form a base.
Oven Front
Oven Back
Oven Door
4 Screws
4 Feet
Cover
2
Outer Column - 2 Pieces
Inner Column - 2 Pieces
• Carefully turn the base assembly over. Insert four screws into the
base and tighten.
• Set the base assembly aside for assembly step 5.
Inner Column Pieces
Tabletop - 2 Pieces
Push near
each tab
(on other side)
Push near
each tab
#6 x ¾" (1,9 cm) Screw – 24
Shown Actual Size
3
Tighten and loosen all screws with a Phillips screwdriver.
Do not over-tighten.
• Fit the inner columns together, by inserting the tabs into the slots
on each piece.
• Push to “snap” each tab in place.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Rib
Outer Column Piece
Groove
Outer Column Piece
Socket
Post
4
6
• Place one of the outer column pieces on a flat surface, as shown.
• Fit the rib on one side of the inner column into the groove near the
locking mechanism in the outer column piece.
• Fit the posts on one side of the outer column into the sockets in the
oppsite side.
• Insert three screws into the holes in the outer column assembly
and tighten.
• Slide the inner column towards the bottom of the outer column.
Socket
Post
Rib
5
7
• Fit the remaining outer column piece onto the inner column.
Hint: Line up the groove in the outer column piece with the rib on the
inner column.
• Carefully turn the column assembly over and fit the posts in one side of
the outer column into the sockets in the other side of the outer column.
• Insert three screws into the holes in the outer column assembly
and tighten.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Tabletop Pieces
Base
Column
8
• Turn the column and base over.
• Fit the base onto the column.
Hint: Align the seams on each side of the column with the seams in
the base.
2 Screws
10
• Turn the tabletop pieces over.
• Fit the tabletop pieces together, by inserting the tabs into the slots
on each piece.
4 Screws
• Insert two screws into the tabletop and tighten.
4 Screws
9
• Insert four screws into the base and tighten.
11
• Turn the tabletop over.
• Fit the tabletop onto the base assembly.
Hint: You may need to turn the tabletop to assemble it to the
base assembly.
• Insert four screws into the tabletop and tighten.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Oven Back
Oven Front
Tracks
14
• Slide the tabs on the top of the oven into the track under the tabletop.
4 Screws
12
• Fit the oven front and back pieces together.
Cover
• Insert four screws into the back of the oven and tighten.
Oven Door
13
15
• At an angle, fit a side tab on the oven door into the opening in the
front of the oven.
• Push to snap the other tab on the over door in place.
• Place the cover in the center of the table.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Installation
Make, Serve & Share!
1,5V x 6
“AA” (LR6)
We recommend using alkaline batteries for longer battery life.
When sounds or light become faint or stop, it's time for an
adult to change the batteries.
Power Switch
PRESS
Battery Compartment Door
Stove Top
• Loosen the screws in the battery compartment door and remove
the door.
• Insert three “AA” (LR6) alkaline batteries.
• Slide the power switch ON
• Press the button for cooking sounds and oven light.
or OFF
.
• Replace the battery compartment door and tighten the screws.
• If the stove top begins to operate erratically, you may need to
reset the electronics. Slide the power switch off and back on.
Power/Volume Switch
Battery CCompaarrtmentt Door
PRESS
Serving Tray
• Loosen the screw in the battery compartment door and remove
the door.
• Insert three “AA” (LR6) alkaline batteries.
• Replace the battery compartment door and tighten the screw.
• If the serving tray begins to operate erratically, you may need to
reset the electronics. Slide the power/volume switch off and back on.
• Slide the power/volume switch on the serving tray to ON with
low volume
, ON with high volume
or OFF
.
• Put the pizza or the cookie tray on the serving tray and press the
buttons. The serving tray recognizes the food you are serving!
• Additional food trays sold separately and subject to availability.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2-in-1 Table
As assembled, this toy is a kitchen. Use these instructions to convert to an activity table and back to a kitchen!
Activity Table
(Short)
Kitchen
(Tall)
Oven
Oven
1
1
• Slide the tabs on the top of the oven into the track under the tabletop.
• Grasp the sides of the oven and pull to remove the oven from the
tabletop for more seating room.
PRESS
PRESS
PRESS
2
• Lift the tabletop and turn to lock in place. Push down on the
tabletop to be sure it's secure.
2
• Press the buttons on the column and carefully lower the tabletop.
Stove Top
Stove Top
3
3
• Remove, turn over and replace the stove top into the tabletop.
• Remove, turnover and replace the stove top into the tabletop.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|