| QUICK START GUIDE   Wash program controls   DishDrawerTM dishwasher (Classic)   Wash program indicators   These show which program is selected.   NZ AU US CA   Keep this document handy for easy reference.   For detailed information on the features of your dishwasher, see your ‘User guide’.   Before using your dishwasher, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.   For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service & warranty’ booklet.   Wash   program   selector   STANDARD PROGRAMS - designed to clean and dry your dishes   ECO selector   and indicator   HEAVY   NORMAL   FAST   DELICATE   RINSE   Press to   scroll   through the   wash   programs.   Heavily soiled   pots, pans and   dishes.   Dishes that are   quite heavily   soiled or food   soils that have   been left to dry   overnight   Lightly soiled   dishes.   Lightly soiled   and heat   sensitive   crockery.   Prevents   odors   and soils   drying on   dishes.   Your model   Press if you’d   like the program   to use less energy.   The indicator will   glow red when an   Eco program has   been selected.   Note: each drawer in   DD60DCW7   DD60SC(T)W7   DD60SC(T)X7   DD60SCTM7   DD24SC(T)B7   DD24SC(H)(T)X7   DD24SC(T)W7   double models has its   own controls and can   run independently of   the other drawer.   DD60DCX7   DD60DCM7   DD24DC(T)B7   DD24DC(H)(T)X7   DD24DC(T)W7   ECO PROGRAMS - designed to clean your dishes energy-efficiently   DELICATE   ECO   HEAVY ECO   NORMAL   ECO   FAST ECO   Lightly soiled,   non-greasy   and heat   Heavily soiled   everyday   dishes.   Normal soiled   dishes for   Lightly soiled,   non-greasy   dishes.   optimum   sensitive   water and   crockery.   energy usage.   The Energy   Guide is based   on this cycle.   Operating instructions - Starting a wash   Main controls and display   Fault symbols (if these appear, see section   ‘If there is a fault’ in your ‘User guide’)   Time remaining   1 4 Add detergent and check rinse   aid   Discard scraps   Stage of wash program   (see ‘During and after   the wash’)   Keylock or Childlock is activated   Delay start mode   Scrape large food particles off   (e.g. bones, fruit stones) and   remove any foreign objects   Fill the detergent dispenser (a) with   powdered detergent and close the   dispenser door.   (e.g. toothpicks, strings, paper).   a Important!   Do not place liquid detergent or tablets in   the detergent dispenser.   2 3 c Load dishes carefully   b If the indicator on its plug (c) glows   bright red, refill the rinse aid   dispenser (b) with liquid rinse aid.   Make sure you then refit the rinse   aid plug back into its original   position.   Power on/off   Start/Pause   Keylock   To help with wash performance,   arrange dishes so they are   evenly spaced and not nesting.   Press   or off.   to turn the dishwasher on   Press   wash.   to start, pause, or resume a   Keylock disables all the buttons   – helpful when cleaning the   dishwasher.   d Opening the drawer will automatically   turn the dishwasher on for 30 seconds.   After pausing a wash, wait for 3 beeps   before opening the drawer. Forcing it   open in mid-cycle may cause damage   or injury.   To activate, press and hold   until   If using a tablet, place it in the   cutlery basket (d) or at the bottom   of the drawer.   you hear one beep (3 seconds). The   display will show   . Check spray arm(s)   To cancel, press and hold   until   its symbol disappears from the display.   Cancel wash/Cancel Delay start   Set Delay start   Ensure there are no items   blocking the spray arm(s) from   rotating.   5 6 Select wash   Press to cancel a wash that has   already started or to cancel the Delay   start setting.   1 Press and hold   until   Childlock   appears on the display, then   release. You are now in Delay start   mode.   Power the dishwasher on   then select wash program   Childlock locks the drawer and   disables all the buttons, preventing   unauthorized use by children.   . If there is any water in the drawer,   it will automatically drain before the   dishwasher turns off.   2 Press   briefly again, repeating   until the display shows the number   of hours you want to delay the   start of a wash by (1 to 12 hours).   To activate, press and hold   you hear two beeps (5 seconds). The   display will show   until   Start wash or set Delay start   . Close the drawer and press   . You have now set Delay start. The   wash will start once the delay time   is over, provided the drawer is closed.   To cancel, press and hold   symbol disappears from the display.   until its   continued over   Download from Www.Somanuals.com. All Manuals Search And Download.   |