TABLE OF CONTENTS
Special notes on LCD monitors .................................................. 1
Information for your safety and comfort.................................. 2
Unpacking ................................................................................... 5
Attaching/Removing the base .................................................... 6
Screen position adjustment........................................................ 6
Connecting the power cord ....................................................... 7
Safety precaution ....................................................................... 7
Cleaning your monitor ............................................................... 7
Power saving ............................................................................... 8
DDC.............................................................................................. 8
Connector Pin Assignment ......................................................... 9
Standard Timing Table..................................................................10
Installation.....................................................................................11
User controls..................................................................................12
Acer 3D Glasses User’s Guide ....................................................18
Troubleshooting............................................................................21
Download from Www.Somanuals.com. All Manuals Search And Download.
In forma tio n fo r yo u r sa fe ty a n d co mfo rt
Sa fe t y in st ru ct io n s
Read these instructions carefully. Keep this document for future reference. Follow all
warnings and instructions marked on the product.
CAUTION fo r a cce ssib ilit y
Be sure that the power outlet you plug the power cord into is easily accessible and
located as close to the equipment operator as possible. When you need to disconnect
power to the equipment, be sure to unplug the power cord from the electrical outlet.
Wa rn in g s
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the
product falls, it could be seriously damaged.
•
Slots and openings are provided for ventilation to ensure reliable operation of
the product and to protect it from overheating. These openings must not be
blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This product should never
be placed near or over a radiator or heat register, or in a built-in installation
unless proper ventilation is provided.
•
Never push objects of any kind into this product through cabinet
slots as they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into the
product.
•
•
To avoid damage of internal components and to prevent battery leakage, do
not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environ ment which
will probably cause unexpected short current or damage rotor devices, HDD,
Optical drive, and even exposure risk from lithium battery pack.
Sa fe list e n in g
Follow these instructions, suggested by hearing experts,to protect your earing.
•
Gradually increase the volume until you can hear it clearly and comfortably and
without distortion.
•
•
•
•
After setting the volume level, do not increase it afteryour ears adjust.
Limit the amount of time listening to music at high volume.
Avoid turning up the volume to block out noisy surroundings.
Turn the volume down if you can’t hear people speaking near you.
EN-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro d u ct se rvicin g
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks. Refer all servicing to qualified
service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service person-
nel when:
•
•
•
•
•
•
the power cord or plug is damaged, cut or frayed
liquid was spilled into the product
the product was exposed to rain or water
the product has been dropped or the case has been damaged
the product exhibits a distinct change in performance, indicating a need for service
the product does not operate normally after following the operating instructions
-----------------------------------------------------------------------------------------------------
Note: Adjust only those controls that are covered by the operating instructions,
since improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the product to
normal condition.
LCD Pixe l St a t e m e n t
The LCD unit is produced with high-precision manufacturing techniques. Nevertheless,
some pixels may occasionally misfire or appear as black or red dots. This has no effect on
the recorded image and does not constitute a malfunction.
Tip s a n d in fo rm a t io n fo r co m fo rt a b le u se
Computer users may complain of eyestrain and headaches after prolonged use. Users are
also at risk of physical injury after long hours of working in front of a computer. Long
work periods, bad posture, poor work habits, stress, inadequate working conditions,
personal health and other factors greatly increase the risk of physical injury.
Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis
or other musculoskeletal disorders. The following symptoms may appear in the hands,
wrists, arms, shoulders, neck or back:
•
•
•
•
•
numbness, or a burning or tingling sensation
aching, soreness or tenderness
pain, swelling or throbbing
stiffness or tightness
coldness or weakness
If you have these symptoms, or any other recurring or persistent discomfort and/or pain
related to computer use, consult a physician immediately and inform your company’s
health and safety department.
The following section provides tips for more comfortable computer use.
Fin d in g yo u r co m fo rt zo n e
Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest,
or raising your sitting height to achieve maximum comfort. Observe the following tips:
•
•
•
refrain from staying too long in one fixed posture
avoid slouching forward and/or leaning backward
stand up and walk around regularly to remove the strain on your leg muscles
EN-3
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
take short rests to relax your neck and shoulders
avoid tensing your muscles or shrugging your shoulders
install the external display, keyboard and mouse properly and within comfort
able reach
•
if you view your monitor more than your documents, place the display at the
center of your desk to minimize neck strain
Ta kin g ca re o f yo u r visio n
Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room
lighting, poorly focused screens, very small typefaces and low-contrast displays could
stress your eyes. The following sections provide suggestions on how to reduce eyestrain.
Eyes
•
•
Rest your eyes frequently.
Give your eyes regular breaks by looking away from the monitor and focusing
on a distant point.
•
Blink frequently to keep your eyes from drying out.
Display
•
•
Keep your display clean.
Keep your head at a higher level than the top edge of the display so your eyes
point downward when looking at the middle of the display.
Adjust the display brightness and/or contrast to a comfortable level for enhanced
text readability and graphics clarity.
•
•
Eliminate glare and reflections by:
•
placing your display in such a way that the side faces the window or any light
source
•
•
•
•
•
minimizing room light by using drapes, shades or blinds
using a task light
changing the display’s viewing angle
using a glare-reduction filter
using a display visor, such as a piece of cardboard extended from the display’s
top front edge
•
•
Avoid adjusting your display to an awkward viewing angle.
Avoid looking at bright light sources, such as open windows, for extended
periods of time.
De ve lo p in g g o o d w o rk h a b it s
Develop the following work habits to make your computer use more relaxing and
productive:
•
•
•
•
Take short breaks regularly and often.
Perform some stretching exercises.
Breathe fresh air as often as possible.
Exercise regularly and maintain a healthy body.
-----------------------------------------------------------------------------------------------------
Warning! We do not recommend using the product on a couch or bed. If this is
unavoidable, work for only short periods, take breaks regularly, and do some
stretching exercises.
-----------------------------------------------------------------------------------------------------
For more information and help in recycling, please visit the following websites:
Worldwide:
EN-4
Download from Www.Somanuals.com. All Manuals Search And Download.
UNPACKING
Please check the following items are present when you unpack the box,
and save the packing materials in case you will need to ship or transport
the monitor in future.
·
3D glasses
·
LCD Monitor
·
HDMI Cabel
(Optional)
·
AC Power Cord
·
D-Sub Cable
(Optional)
·
Audio Cable
(Optional)
·
User Manual
·
Quick Start Guide
EN-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach in g / Re mo vin g th e Ba se
--------------------------------------------------------------------
Note: Remove the monitor and monitor base from its packaging.
Carefully place the monitor face-down on a stable surface -- use a
cloth to avoid scratching the screen.
In st a ll:
Re m o ve :
Align the release button on the
bottom of the monitor with the
corresponding
Depress the release button as
indicated first before removing the
base and follow the arrow direction
to remove it.
slots on the bottom of the base.
SCREEN POSITION ADJUSTMENT
In oder to optimize the best viewing position, you can adjust the tilt of
the monitor by using both of your hands to hold the edges of the monitor
as shown in the figure below.
The monitor can be adjusted to 15 degrees up or 5 degrees down as indi-
cated by arrow below.
EN-6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE POWER CORD
·
·
·
·
·
Check first to make sure that the power cord you use is the correct type
required for your area.
This monitor has a universal power supply that allows operation in either
100/120V AC or 220/240 V AC voltage area. No user-adjustment is required.
Plug one end of the power cord to the AC Inlet, plug another end to a
proper AC outlet.
For unit using at 120 V AC:
Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V.
For unit using at 220/240 V AC (outside of U.S.):
Use a Cord Set consisting of H05VV-F cord and plug rated 10 A, 250 V. The
cord set should have the appropriate safety approvals for the country in
which the equipment will be installed.
SAFETY PRECAUTION
·
Avoid placing the monitor, or any other heavy object, on the power cord
to avoid damage to the cable.
·
·
Do not expose the monitor to rain, excessive moisture, or dust.
Do not cover the ventilation slots or openings of the monitor. Always
put the monitor in a place where there is adequate ventilation.
·
Avoid placing the monitor against a bright background or where sun-
light or other light sources may reflect on the face of the monitor. Place
the monitor just below eye level.
·
·
Handle with care when transporting the monitor.
Refrain from giving shock or scratch to the screen, as screen is fragile.
CLEANING YOUR MONITOR
Please carefully follow the below guidelines when cleaning the monitor.
·
·
Always unplug the monitor before cleaning.
Use a soft cloth to wipe the screen and cabinet front and sides.
EN-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Po w e r sa vin g
The monitor will be driven into Power Saving” mode by the control signal
from the display controller, as indicated by the amber-color power LED.
LED
St a t e
Lig h t
ON
White
Power Saving
Mode
Amber
The power saving states will be kept until a control signal has been detected
or the keyboard or mouse is activated. The recovery time from Active OFF
state back to ON state is around 3 seconds.
DDC
To make your installation easier, the monitor is able to Plug and Play with
your system if your system also supports DDC protocol. The DDC (Display
Data Channel) is a communication protocol through which the monitor
automatically informs the host system about its capabilities, for example,
supported resolutions and corresponding timing. The monitor supports
DDC2B standard.
EN-8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTOR PIN ASSIGNMENT
5
1
6
10
15
15-Pin Color Display Signal Cable
11
PIN NO.
DESCRIPTION
Red
PIN NO.
9.
DESCRIPTION
+5V
1.
2.
3.
4.
5.
6.
7.
8.
Green
10.
Logic Ground
Monitor Ground
DDC-Serial Data
H-Sync
Blue
11.
Monitor Ground
Cable Detect
R-Ground
G-Ground
B-Ground
12.
13.
14.
V-Sync
15.
DDC-Serial Clock
19-Pin color display signal cable*
PIN
Me a n in g
PIN
Me a n in g
1.
2.
3.
4.
TMDS Data2+
TMDS Data2 Shield
TMDS Data2–
10.
11.
12.
13.
TMDS Clock+
TMDS Clock Shield
TMDS Clock–
CEC
TMDS Data1+
Reserved (N.C. on
device)
5.
TMDS Data1 Shield
14.
6.
7.
8.
9.
TMDS Data1–
TMDS Data0+
15.
16.
17.
18.
19.
SCL
SDA
TMDS Data0 Shield
TMDS Data0–
DDC/CEC Ground
+5V Power
Hot Plug Detect
* only for certain models
EN-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Sta n d a rd Timin g Ta b le
Mo d e
Re so lu t io n
1
2
VGA
640x480
640x480
60
66.66
70
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
MAC
3
VESA
SVGA
SVGA
XGA
720x400
4
800x600
56
5
800x600
60
6
1024x768
1024x768
1152x864
1280x800
1280x1024
1440x900
1920x1080
60
7
XGA
70
8
VESA
WXGA
SXGA
WXGA+
UXGA
75
9
60
10
11
12
60
60
60
3DTimin g Ta b le
Mo d e
Re so lu t io n
1
2
3
4
5
6
7
8
1920x2205p
1280x1470p
1280x1470p
1920x1080i
1920x1080i
1920x1080p
1280x720p
1280x720p
24
60
50
60
50
24
60
50
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
EN-10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
To install the monitor to your host system, please follow the steps as given
below:
St e p s
1. 1-1 Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2 HDMI Cable (Only HDMI-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
2. Connect the Audio Cable (Only Audio input model)
3. Connect power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
4. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
5. If the monitor still does not function properly, please refer to the
troubleshooting section to diagnose the problem.
HD MI
HD MI
VGA
1-1
VGA
1-2
1-2
2
HDMI
H DMI
3
1-2 1-2 1-1
2
3
EN-11
Download from Www.Somanuals.com. All Manuals Search And Download.
USER CONTROLS
Power Switch / Power LED:
To turn the monitor ON or OFF.
Lights up to indicate the power is turned ON.
Usin g t h e Sh o rt cu t Me n u
Press the function button to open the shortcut menu. The shortcut menu lets you
quickly select the most commonly accessed settings.
Empowering:
Press the Empowering Key to open the Acer eColor Management OSD and access
the scenario modes.
AUTO Auto Adjust:
Press this button to activate the Auto Adjustment function. The Auto Adjustment
function is used to set the HPos, VPos, Clock and Focus
(only for Analog mode).
MENU OSD functions
Press this botton to activate the OSD menu.
INPUT Input Key
Use Input key to select from different video sources that may be connected to
your monitor.
(a ) VGA input
(b) DVI input
(c) HDMI input
As you cycle through the sources you will see the following messages on right top
side of screen to indicate currently selected input source. It may take 3
seconds for the image to appear.
VGA or DVI or HDMI
If either VGA or DVI input is selected ,but the VGA a nd DVI cables are not con-
ne cte d, a floating dia log box indicate s:
“No Ca ble Connect” or “No Signa l”
EN-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Ace r e Co lo r Ma n a g e m e n t
Op e ra t io n in st ru ct io n s
Step 1: Press “ “ Key to open the Acer eColor Management OSD and
access the scenario modes
Step 2: Press “ “ or “ ” to select the mode
Step 3: Press “ Adjust/Exit “ Key to confirm the mode and run Auto Adjust.
Fe a t u re s a n d Be n e fit s
Main
Men u
ico n
Sub
Men u
ico n
Su b
Men u
item
Description
User defined. Settings can be fine-tuned to
suit any situation
N/A
N/A
N/A
User mode
ECO mode
Adjusts the settings to reduce power
consumption
Standard Default Setting. Reflects native display
mode
capability
Enhances colors and emphasize fine detail.
Pictures and photographs appear in vibrant
colors with sharp detail.
Grahpic
mode
N/A
N/A
Displays scenes in clearest detail. Presents
great visuals, even in unsuitably-lit
environments.
Movie
mode
EN-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad ju st in g t h e OSD se t t in g s
--------------------------------------------------------------------
Note: The following content is for general reference only. Actual
product specifications may vary.
The OSD can be used for adjusting the settings of your LCD Monitor.
Press the MENU key to open the OSD. You can use the OSD to adjust the
picture quality, OSD Timeout and general settings. For advanced settings,
please refer to following page:
Ad ju st in g t h e p ict u re q u a lit y
1 Press the MENU key to bring up the OSD.
2 Using the
/
keys, select
Picture from the OSD. Then navigate
to the picture element you wish to adjust. Use the
item page.
to Enter to the
3 Use the / keys to adjust the sliding scales.
4 The Picture menu can be used to adjust the current Brightness, Contrast,
Colour Temp, Auto Config and other image-related qualities.
EN-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad ju st in g t h e OSD
3D Notification
Off
1 Press the MENU key to bring up the OSD.
2 Using the directional keys, select
OSD from the on screen display.
Then navigate to the feature you wish to adjust.
EN-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad ju st in g t h e se t t in g
1 Press the MENU key to bring up the OSD.
2 Using the
/
keys, select
Setting from the OSD. Then navigate to
to Enter to the item page.
the feature you wish to adjust. Use the
3 The Setting menu can be used to adjust the screen Menu Language and
other important settings.
EN-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Prod uct in f ormat ion
Information
1920 x 1080
H: 67KHz V: 60Hz
VGA Input
S/N:ETL53091326350380B3742
1 Press the M ENU key to bring up the OSD.
2 Using the
/
keys, select
Information from the OSD. Then the
basic information of LCD monitor will show up for current input.
EN-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Ace r 3D Gla sses Use r’s Gu id e
Acer brings an immersive 3D experience to your home with the Acer 3D
glasses. 3D content and adequate PC/Player settings are necessary for
displaying correctly.
Ace r 3D Glasses
High -spee d HDMI Ca bel
• It is important to use a high-speed HDMI™ cable to enjoy 3D media.
Tu rn ON/Off t he g la sse s
To turn on the 3D glasses:
• Press the power button located on the left side of the frame. The LED
indicator will flash once.
To turn off the 3D glasses:
• Press and hold the power button until the LED lights up.
Re co m m e n d e d vie w in g zo n e
• Horizontal: 20 to 160º Vertical: 20 to 160º.
EN-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Vie w in g 3D co n t e n t
• Connect the Acer 3D Monitor to your Blu-ray player with a High-speed
HDMI™ cable and attach the power cable.
• Turn on the monitor and Blu-ray player*.
• On the Acer 3D monitor, press Input to set the HDMI™ source.
• Play the 3D title on the Blu-ray player.
• Turn on the 3D glasses*.
EN-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Ba t t e ry in d ica t o r
• The 3D glasses have power for up to 70 hours of continuous use. Near the
end of the battery life, the indicator LED will flash 4 times consecutively
every 1 minute and till the battery life is ended. When you turn on with
low power, LED will be light up for 5 second, then the 3D glasses will
shut down.
Ba t t e ry re p la ce m e n t
• Make sure the positive terminals face outwards.
Ch a n g in g t h e n o se p ie ce
• 3D glasses come with three interchangeable nosepieces to give you a
comfortable fit. You should pull out the current nosepiece horizontally
and insert the one that fits you best.
EN-20
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before sending your LCD monitor for servicing, please check the trouble-
shooting list below to see if you can self-diagnose the problem.
(VGA Mode)
Pro b le m s Cu rre n t St a t u s Re m e d y
LED ON
·
Using OSD, adjust brightness and contrast
to maximum or reset to their default
settings.
LED OFF
·
·
Check the power switch.
Check if AC power cord is properly
connected to the monitor.
No Picture
LED displays
amber color
·
·
·
Check if video signal cable is properly
connected at the back of monitor.
Check if the power of computer system is
ON.
Unstable
Picture
Check if the specification of graphics
adapter and monitor is in compliance
which may be causing the input signal
frequency mismatch.
Display is
·
·
·
Using OSD, adjust RESOLUTION, CLOCK,
CLOCK-PHASE, H-POSITION and V-
POSITION with non-standard signals.
missing, center
shift, or too
small or too
large in display
size
Abnormal
Picture
Using OSD, in case of missing full-screen
image, please select other resolution or
other vertical refresh timing.
Wait for a few seconds after adjusting the
size of the image before changing or
disconnecting the signal cable or powering
OFF the monitor.
EN-21
Download from Www.Somanuals.com. All Manuals Search And Download.
(HDMI Mode)
Pro b le m s
Cu rre n t St a t u s
Re me d y
Monitor LED ON
·
Ensure the video playback device
or game console has 3D mode
turned ON.
Ensure the content supports 3D.
Ensure the 3D glasses are switched
ON.
If necessary, adjust your viewing
position.
No 3D
effect
After checking
the items above
·
·
Select “Auto” from the OSD to
reconnect the Glasses.
Glasses not Monitor LED ON
working
Ensure the battery is sufficiently
charged.
EN-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan
And,
Acer Europe SA
Via Cantonale, Centro Galleria 2 6928 Manno Switzerland
Hereby declare that:
Product:
LCD Monitor
Trade Name:
Model Number:
SKU Number:
Acer
HS244HQ
HS244HQ xxxxxx (“x” = 0~9, a ~ z, or A ~ Z)
Is compliant with the essential requirements and other relevant provisions of the following EC directives,
and that all the necessary steps have been taken and are in force to assure that production units of the
same product will continue comply with the requirements.
EMC Directive 2004/108/EC as attested by conformity with the following harmonized
standards:
-. EN55022, AS/NZS CISPR22 Class B.
-. EN55024
-. EN61000-3-2, Class D
-. EN61000-3-3
Low Voltage Directive 2006/95/EC as attested by conformity with the following
harmonized standard:
-. EN60950-1
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances
in Electrical and Electronic Equipment:
-. The maximum concentration values of the restricted substances by weight in homogenous material are:
Lead
Mercury
0.1% Polybrominated Biphenyls (PBB’s)
0.1% Polybrominated Diphenyl Ethers (PBDE’s) 0.1%
0.01%
0.1%
Hexavalent Chromium 0.1% Cadmium
Directive 2009/125/EC with regard to establishing a framework for the setting of
ecodesign requirements for energy-related product.
Year to begin affixing CE marking 2010.
_______________________________
Easy Lai /Manager
Regulation, Acer Inc.
Sep. 28, 2010
Date
Download from Www.Somanuals.com. All Manuals Search And Download.
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
The following local Manufacturer /Importer is responsible for this declaration:
Product:
LCD Monitor
Trade Name:
Model Number:
SKU Number:
Acer
HS244HQ
HS244HQ xxxxxx (“x” = 0~9, a ~ z, A ~ Z or Blank)
Name of Responsible Party:
Acer America Corporation
Address of Responsible Party: 333 West San Carlos St.
San Jose, CA 95110
U. S. A.
Contact Person:
Phone No.:
Fax No.:
Acer Representative
254-298-4000
254-298-4147
Download from Www.Somanuals.com. All Manuals Search And Download.
|