&
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
TM
Thank you for purchasing the Oliso Touch&Glide iron. You’re just a few
steps away from a whole new way of ironing. Follow the instructions in
this manual to learn about your new iron’s features and care. We hope you
TM
enjoy your Oliso Touch&Glide .
Download from Www.Somanuals.com. All Manuals Search And Download.
3 simple steps to start
1
2
FILL
SET UP
Open the Flip FunnelTM and add water to the
tank with the fill cup or directly from a faucet.
Plug in, then choose a fabric setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
IRON
TM
Enjoy your Touch&Glide !
If you would like to learn more about
your iron’s unique features, please
read on.
When the blinking green light becomes
steady, touch the handle and iron.
Download from Www.Somanuals.com. All Manuals Search And Download.
getting to know your
iron
status light
steam button
spray button
steam selector
TM
Smart Touch handle
TM
Auto-Lift
override switch
electronic fabric selector knob
drain spout
TM
Flip Funnel
water tank
spray nozzle
TM
Flow Glide soleplate
TM
Auto-Lift spacers
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
Auto-Lift system
To operate, place the iron on its soleplate on
a flat surface. Plug the iron into an outlet and
make sure the Auto-LiftTM switch is in the on
Simply touch the iron handle and the iron
will sense your hand and lower. Any time
you release the handle the spacers will
automatically raise the iron to protect your
fabric.
(
) position.
TM
overriding the Auto-Lift system
TM
If you wish to turn off the Auto-Lift system, move the switch on the back of the iron to the
off ( ) position. Your Touch&GlideTM will now operate like a standard iron. If the iron is left
in the horizontal position for more than 30 seconds, the Auto-LiftTM spacers will raise. This will
prevent the iron from burning your fabric or ironing surface. Touch the iron handle and the
iron will lower. You can restore Auto-LiftTM by returning the switch to the on (
) position.
Download from Www.Somanuals.com. All Manuals Search And Download.
water tank
Before filling, slide the
Alternatively, fill directly
from a faucet holding
the iron horizontally.
Do not fill the tank past
the MAX fill line on the
side of the iron. Close
the port when done.
steam selector to off (
Make sure the iron is
unplugged.
).
Open the Flip FunnelTM.
If you need to add water during ironing, unplug the
iron and repeat the above steps. After filling, make
sure the iron is fully reheated before ironing.
Leave the iron in a
horizontal position and
water recommendations
This iron is designed to be used with regular tap water. If
your water is over 12 grams of hardness we recommend
using either inexpensive bottled spring water or mixing half
tap water with half distilled water. Never use 100% distilled
water as this can cause the iron to spit and leak.
fill using the included fill
cup. Two fill cups equal
the maximum capacity
of the water tank.
Download from Www.Somanuals.com. All Manuals Search And Download.
fabric selector
temperature is too low for steam
steam ok
Turn the grey fabric selector knob to select a fabric setting. To use constant steam
or steam burst, the temperature must be set to the cotton/linen range ( ).
•••
fabric selector knob
flashing green
flashing red
red
green
off
heating or cooling
at set temp
auto shut-off
TM
The Touch&Glide iron uses a status light to display the iron’s status. To ensure
correct temperature, wait until the light displays steady green before ironing.
status light
Download from Www.Somanuals.com. All Manuals Search And Download.
steam/spray system
Steam Selector: Slide the steam selector to set the amount of constant steam. The iron can
only produce steam when the fabric selector knob is set to the cotton or linen range ( ).
•••
Allow the iron to heat up (steady green status light) before activating the steam control.
Steam will be produced as soon as the iron is lowered.
Dry Ironing: To turn off the steam, slide the steam selector off (
).
TM
Auto Anti-Drip: Your Touch&Glide iron has an anti-drip feature which shuts off steam
production any time the iron is raised by the Auto-LiftTM spacers. This prevents unwanted
steam while the iron is standing. This feature also reduces water dripping from the soleplate
while the iron is not hot enough to produce steam. To prevent dripping entirely, keep the
steam selector in the off (
) position.
Spray
• press the spray button for a strong mist spray
• the spray will help with wrinkle removal
Burst of Steam
• firmly press the steam button for a strong burst of steam from the soleplate.
• the steam button can only be used when the iron is heated to the cotton or linen
range ( ).
•••
• wait at least 3 seconds between each press of steam button.
Vertical Steam
• to steam vertically press the steam button while holding the iron upright.
• this is useful for getting creases and wrinkles out of hanging clothes or curtains.
• wait at least 3 seconds between each press of the steam button.
Download from Www.Somanuals.com. All Manuals Search And Download.
auto shut-off system
TM
If the Touch&Glide iron is not being used while it is plugged in, the status light will flash red and the iron will
turn itself off. The auto shut-off timing depends on whether the Auto-LiftTM system is turned on or off. The iron
will return to normal operation once you resume ironing.
Auto-LiftTM on (
)
Auto-LiftTM off (
)
iron position
auto shut-off timing
iron position
auto shut-off timing
30 seconds after,
8 minutes unused
spacers lift iron*
8 minutes vertical
8 minutes vertical
30 seconds knocked over
30 seconds knocked over
*when the Auto-LiftTM system is off and the iron is left unused in a horizontal position for more than 30 seconds,
the spacers will raise the iron to prevent burning your fabric or ironing surface.
Download from Www.Somanuals.com. All Manuals Search And Download.
after ironing
a. Turn the fabric selector knob to off. Slide the steam selector to off (
).
b. Unplug the appliance (Do not hold iron while unplugging or the Auto-LiftTM
spacers will not stay down).
c. Place iron on the Auto-LiftTM spacers and allow to cool.
d.
d. Important: Empty water from the water tank after use. Tilt the
TM
Touch&Glide forward to drain from the spout at the front of the iron.
To drain faster, open the Flip FunnelTM .
e. For easy storage, the power cord can be wound loosely around the
TM
Touch&Glide once the iron has cooled sufficiently.
e.
maintenance
The soleplate should be cleaned if starch or other residue build up. When the iron is cool, wipe the
soleplate with a soft, damp cloth. Do not use abrasive cleaners or scouring pads as this will damage
the non-stick coating.
Mineral deposits from tap water can occur in the soleplate vents. To clean, fill the water tank and heat
the iron to the linen fabric setting. Once the iron is fully heated, unplug the iron and hold over a sink.
Press the steam button repeatedly until water begins to drip out of the soleplate. Be careful, as this
creates large amounts of steam.
To ensure optimal steam production, the steam valve should be regularly cleared of accumulated
debris and minerals. This is done by moving the steam selector back and forth from the off (
to the max ( ) steam settings several times.
)
Download from Www.Somanuals.com. All Manuals Search And Download.
trouble shooting guide
PROBLEM
THINGS TO CHECK
SOLUTION
turn the fabric selector knob to a fabric setting.
check to make sure the plug is properly seated in the socket.
fabric selector knob is set to off
iron not plugged in correctly
auto shut-off system is activated
Auto-LiftTM switch set to off
iron does not heat
touch the handle.
set the switch on the back of the iron to the on ( ) position.
iron not plugged in correctly
check to make sure the plug is properly seated in the socket.
spacers do not
come out
move your hand away from the iron, and the Auto-LiftTM system
will raise the soleplate.
Smart TouchTM handle activated
the fabric selector knob must be set to the cotton or linen
settings to produce even steam.
iron is not hot enough
steam selector set to off
steam valve is clogged
iron does not steam
steam selector must be turned to a setting.
move the steam selector from off ( ) to the max (
settings a few times to unclog.
)
when the Auto-LiftTM switch is set to off ( ), always store the
iron in the vertical position.
Auto-LiftTM is off and iron
is horizontal
iron leaks
make sure the fabric selector knob is set to the cotton or linen
range to ensure proper steam production.
iron is not hot enough
allow 3 seconds between uses of the steam burst function.
steam burst button is overused
water hardness may be too high
iron is emitting a brown
or white substance
Switch to either spring water or half tap/half distilled water
mixture. See the “water tank” page for more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
One (1) Year Limited Warranty
Oliso, Inc. warrants that for a period of one year from the date of the original purchase, this product will be free from defects in material
and workmanship, when utilized for normal household use. Oliso, Inc. will repair or replace this product or any component of the product
found to be defective during the warranty period without charge to the customer. If a replacement product is sent, it will carry the remaining
warranty of the original product. Replacement will be made with a new or remanufactured product or component. If the product is no longer
available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty.
This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales
receipt. Proof of purchase is required to obtain warranty performance. Oliso, Inc. dealers or retail stores selling Oliso, Inc. products do not
have the right to alter, modify or in any way change the terms and conditions of this warranty.
The liability of Oliso, Inc. is limited solely to the cost of repair or replacement of the product at its option. This warranty does not cover nor-
mal wear of parts and does not apply to any product that has been tampered with or used for commercial purposes. This warranty does not
cover damage caused by misuse, abuse, use on improper voltage or current, use contrary to the operating instructions, negligent handling
or damage due to faulty packaging or mishandling in transit. This warranty does not cover damage or defects caused by or resulting from
damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not
authorized by Oliso, Inc. Further, the warranty does not cover Acts of God such as fire, flood, hurricanes, and tornados.
This warranty is extended to the original purchaser of the product and excludes all other legal and/or conventional warranties. The respon-
sibility of Oliso, Inc. is limited to the specific obligations expressly assumed by it under the terms of the limited warranty. In no event shall
Oliso, Inc. be liable for any incidental or consequential damages caused by breach of any express, implied or statutory warranty or condition.
Except to the extent prohibited by law, any implied warranty or condition of merchantability or fitness for a particular purchase is limited in
duration to the duration of the above warranty. Oliso, Inc. disclaims all other warranties, conditions, or representations, express, implied,
statutory or otherwise. In no event shall Oliso, Inc. be liable for any indirect, special, incidental or consequential losses or damages (including
but not limited to interruption of business or loss of business or profit) resulting from the use of or inability to use the product, any breach
of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. Some states or jurisdictions do not
allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above
limitations or exclusion may not apply to you.
If you have any question regarding this warranty or would like to obtain warranty service, please email Oliso, Inc. at customerservice@oliso.com
and a service center address will be provided to you. If you have further questions, you may call 1-800-899-5157.
Download from Www.Somanuals.com. All Manuals Search And Download.
For product questions:
Oliso Customer Service
1.800.899.5157
2005 Oliso, Inc. All rights reserved. Touch&GlideTM, Auto-LiftTM, Flow GlideTM,
Flip FunnelTM, and Smart TouchTM are trademarks of Oliso Inc. Printed in China
c
U.S. Patent No. 6453587,
Patent Pending
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Miele Dishwasher G 5795 User Manual
Nexgrill Tool Storage 960 0009 User Manual
Nilfisk ALTO Vacuum Cleaner SR 1900 D User Manual
Omnimount TV Mount L27 1002790 manual 120707vB User Manual
Optiview Security Camera 22XSPD User Manual
Oreck Vacuum Cleaner XL3640HH User Manual
Oregon Scientific Weather Radio BAR986HGA User Manual
Panasonic Network Card 2SC2404 User Manual
Panasonic Network Card MAZLxxxH Series User Manual
Panasonic Webcam HX A100 User Manual