I n s t a l l a t i o n G u i d e
Pro15SW
P r o f e s s i o n a l Q u a l i t y , C a b i n e t ,
H i g h - P o w e r H o m e T h e a t e r S u b w o o f e r
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
The Niles StageFront Pro15SW 15-inch High-Power Home Theater Powered
Subwoofer is expressly designed for superior sonic quality in home theater and
multi-channel music bass reinforcement applications. It employs advanced
technology components that extract powerful bass in recorded music or the
thunderous deep sound effects in a movie. The Pro15SW is the perfect choice
wherever enhanced bass sound is the most important consideration.
Pro15SW
Stock Number
FG01138
1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol, within an
CAUTION
equilateral triangle, is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
CAUTION: TO REDUCE THE
RISKOFELECTRICAL SHOCK,
DO NOT REMOVE COVER.
NO USER SERVICEABLE
PARTS I N S I D E . R E F E R
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equivalent triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture
1. Read these instructions.
2. Keep these instructions
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in according with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plug, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lighting storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. Do not expose this equipment to dripping or splashing and ensure that no objects filled
with liquids, such as vases, are placed on the equipment.
16. To completely disconnect this equipment from the AC mains, disconnect the power supply
cord plug from the AC receptacle.
17. The main plug of the power supply cord shall remain readily operable.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES AND BENEFITS
15-INCH INTERLACED CARBON-FIBER WOOFER WITH CAST ALUMINUM
FRAME AND BUTYL-RUBBER SURROUND
The Pro15SW’s long-throw front-firing 15” woofer creates deep authoritative bass at
sustained output levels.
1,000 WATT ADVANCED DIGITAL AMPLIFIER
Niles uses the latest digital technology so bass response will be extremely fast and
absolutely accurate, no matter what audio material is being reproduced. The efficient
design means little heat is generated.
SOPHISTICATED MOTOR ASSEMBLY WITH HIGH BL MAGNET, EXTENDED POLE
PIECE AND MACHINED TOP PLATE
The Pro15SW’s woofer features a sophisticated motor assembly that combines
a high BL magnet and extended pole piece for deep bass response and clean
bass tones. Moreover, the machined top plate provides extra rigidity to the entire
assembly for consistent performance over prolonged use.
SEPARATE BASS LEVEL CONTROLS AND TRIGGER INPUT FOR MOVIES
OR MUSIC
Separate bass level controls for music and movies triggered via a 12-volt input
enable customized settings for automated DVD-Audio or Dolby® surround
sound effects.
GOLD PLATED STEREO RCA LINE-LEVEL AND LOUDSPEAKER-LEVEL INPUTS
The Pro15SW features stereo RCA line-level inputs as well as a non-filtered RCA
LFE (Low Frequency Effects) line-level input for a direct connection from a 5.1 or 7.1
home theater sound processor. The Pro15SW also has gold-plated loudspeaker-
level five-way binding-post inputs for the best quality connection possible.
FRONT MOUNTED ADJUSTABLE LEVEL, LOW-PASS, HIGH-PASS AND
PHASE CONTROLS
Adjustment after installation has never been easier. Easily accessible front controls
for level, low-pass filter, high-pass filter and a fully adjustable phase control (0-to-180
degree) ensure optimal system integration, no matter where the Pro15SW is placed
in the room.
(CONTINUED ON NEXT PAGE)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MUSIC SENSE AND 12 VOLT TRIGGER CIRCUITRY FOR AUTOMATIC
POWER ON/OFF
When enabled, the Pro15SW will turn on when an audio signal is present and
remains on any of the audio inputs. The 12-volt System trigger input functions
in the same fashion. Power will turn off when no signal is present after a delay of
approximately 15 minutes for Music Sense or for the 12-volt trigger.
CASCADE LINE-LEVEL OUTPUTS ALLOW EASY CONNECTION OF
ADDITIONAL WOOFERS
For larger rooms, multiple Pro15SW’s can be easily added to a home theater
system using the line-level audio outputs to feed additional Pro15SW audio inputs.
These outputs may also be used to return signals to processors or receivers.
CROSS BRACED, FRONT-PORTED CABINET WITH REMOVABLE GRILLE
The Pro15SW is housed in an attractive cross-braced polished black cabinet that
provides the ultimate in rigidity and sound clarity. The charcoal sculpted aluminum
grille is easily removable to enable simple installation.
GOLD PLATED STEREO LOUDSPEAKER-LEVEL OUTPUTS
The Pro15SW features gold-plated loudspeaker-level five-way binding-post
outputs for the best quality connection possible. These have a fixed high-pass
filter of 100Hz at 6dB per octave.
ADJUSTABLE ISOLATING FEET
The Pro15SW is equipped with four adjustable spike feet (pre-installed with large
slip-on rubber covers) that couple the woofer cabinet to a hard floor for better
performance. For carpet placement, the rubber covers can be removed to use
the spikes.
DOLBY® DIGITAL READY
The Pro15SW is specifically designed for outstanding Home Theater sound. This
model exceeds the specifications set forth by Dolby Laboratories for the accurate
reproduction of Dolby Digital-Encoded Sources.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION CONSIDERATIONS
RCA CABLE
For line-level connections, use high-quality RCA cables that feature low impedance,
double shielding and gold-plated connectors (see CONTROLS AND CONNECTORS on
page 7). Consult your local Niles dealer for their recommendations.
LOUDSPEAKER WIRE
Use 2-conductor loudspeaker wire for loudspeaker-level connections to the
Pro15SW and satellite loudspeakers (see CONTROLS AND CONNECTORS on page 7).
For these applications, we recommend using 16-gauge wire. For wiring runs longer
than 80 feet, we recommend 14-gauge wire. The Pro15SW’s gold-plated, five-way,
loudspeaker-level binding posts will accommodate up to 12-gauge wire directly.
Larger sizes can be accommodated via pin connectors.
RUNNING WIRES IN WALLS OR CEILINGS
When running wire inside walls or ceilings, use special jacketed cable (CL-2 or CL-3)
to protect the wire and to meet local electrical and fire codes. In some areas, conduit
is also required. For a trouble-free installation, low-voltage wire such as loudspeaker
wire must be run in accordance with the National Electrical Code and any applicable
provisions of the local building code. If you are unsure of the correct installation
techniques, wire jacket, or type of conduit to use, consult a professional audio/video
installer, building contractor, or the local building and inspection department.
PRO15SW PLACEMENT
The StageFront Pro15SW Powered Subwoofer is expressly designed for use in
home theater and multi-channel bass reinforcement applications. For home theater
front, center or rear-channel applications, we recommend using StageFront Pro
or In-Wall models. Models ending in “LCR” are intended primarily for front channel
left/center/right placement or wherever a monopole design is required. Models that
end in “FX” are designed for special effect placement. StageFront Home Theater
Solutions™ Loudspeakers are the perfect choice wherever quality of sound is the
most important consideration.
THE BOUNDARY EFFECT
Placing a Pro15SW in a corner can powerfully affect the way a listener perceives
bass response. Known as the boundary effect, a placement close to a corner-wall
boundary will emphasize certain bass frequencies, while canceling others. This
effect can make the Pro15SW sound excessively boomy and inaccurate to some
listeners, while to others it just seems like more bass sound. Some listeners may
prefer to place the subwoofer (or subwoofers) near the same location as the main
left/right channel loudspeakers.
(CONTINUED ON NEXT PAGE)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION CONSIDERATIONS (CONTINUED)
Because all rooms are unique and people have different expectations with regard
to audio quality, some experimentation may be necessary with regard to placement
and control settings.
Figure 1. A standard placement with the subwoofer right of center.
Figure 2. Placed in the front right of a home theater room.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND CONNECTORS
OPERATION CONTROLS
The Pro15SW’s operation controls are located on the unit’s front panel, as shown
in Figure 3. They function as follows:
2
3
5
4
,%6%,
,/7 0!33
0(!3%
()'( 0!33
ꢇ
ꢇ
3%4 50
-53)#
ꢄꢀ(Z
ꢆꢀŽ
ꢁꢁꢀ(Z
0/
0''
-/6)%
ꢀ
ꢁꢀ
-/6)%
ꢀ
ꢁꢀ
-53)#
ꢂꢀ(Z ꢁꢃꢀ(Z
'3&26&/$:
ꢀŽ
ꢁꢄꢀŽ
ꢅꢀ(Z ꢁꢅꢀ(Z
'3&26&/$:
1
Figure 3. The Pro15SW’s front panel contains the subwoofer’s operation controls.
1. MUSIC/MOVIE LEVEL and SETUP Controls: While listening to music, move SETUP
switch to MUSIC and adjust the MUSIC LEVEL control to set the desired bass
level. Similarly, while listening to a movie, move SETUP to MOVIE and adjust the
MOVIE LEVEL control to set the desired bass level. Each level control includes an
accompanying LED indicator to identify which one is currently active as triggered by
your home theater sound processor or receiver (see Figure 3 on page 7). Also see
SETTING UP THE PRO15SW on page 15.
2. LOW PASS Frequency Control: Use this control to set the subwoofer’s low-pass
crossover frequency from 40 to 120 Hz. For more details, see SETTING UP PRO15SW
on page 15.
3. PHASE Control: Use this control to set the subwoofer’s phase response from 0 to
180°. See SETTING UP THE PRO15SW on page 15.
4. HIGH PASS Frequency adjustment with ON/OFF switch: Use the HIGH PASS control
to set the high-pass crossover frequency from 60 to 160 Hz (according to your
loudspeaker manufacturer’s recommendation) to drive a satellite loudspeaker system
amplifier from the line-level AUDIO OUT jacks (also see Figure 3 on page 7.) To
activate the filtered signals, set the ON/OFF switch to ON.
5. The MODE indicator (on the far right) shows which power mode is active, as set by
the (Auto) POWER switch (see Figure 3 on page 7): Green is ON; Red is STANDBY.
(CONTINUED ON NEXT PAGE)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND CONNECTORS (CONTINUED)
SIGNAL CONNECTORS AND POWER CONTROLS
The Pro15SW’s signal connectors and power controls are located on the unit’s
rear panel, as shown in Figure 4. They function as follows:
NOTE: SEE APPLICATIONS STARTING ON PAGE 10 FOR DETAILED WIRING CONNECTIONS FOR
YOUR APPLICATION.
2
3
1
53*((&34
4:45&.ꢃ0/ꢄ0'' .07*&ꢃ.0%&
*/ 065 */ 065
"-8":4
0/
ꢀꢁꢀꢂ7ꢃ ꢅꢆ7%$ ꢀꢁꢀꢂ7ꢃ ꢅꢆ7%$
"$ꢄ%$ ꢅꢇꢂN" "$ꢄ%$ ꢅꢇꢂN"
.64*$ꢄ
70-5"(&
4&/4&
1SPꢀꢁ48
4
%06#-&ꢃ*/46-"5*0/ꢁ8)&/ꢃ4&37*$*/(ꢃ64&ꢃ0/-:ꢃ*%&/5*$"-ꢃ3&1-"$&.&/5ꢃ1"354ꢊ
$0/'03.ꢀ50ꢀ
6-ꢀ45%ꢁꢂꢃꢄꢄ
$&35*'*&%ꢀ50ꢀ
$"/ꢅ$4"ꢀ45%ꢁ&ꢂꢄꢄꢂꢃ
5
6
8
9
7
ꢅꢅꢇꢄꢆꢀꢂ7ꢃ_ꢃꢇꢂꢄꢈꢂ);ꢃꢅꢈꢂꢂ8
5ꢉ"-ꢃꢆꢇꢂ7ꢃ'03ꢃꢆꢀꢂ7ꢃ*/165
5ꢅꢇ"-ꢃꢆꢇꢂꢃ'03ꢃꢅꢅꢇ7ꢃ*/165
Figure 4. The Pro15SW’s rear panel contains the subwoofer’s signal connectors
and power controls.
1. POWER TRIGGER: For external power triggering, use a mini (3.5 mm) plug to connect
the IN jack to a power on/off trigger signal from a home theater sound processor or
receiver. Power on is 3 to 30 Vdc (or Vac). Tip is positive. Power off is 0 Vdc (or Vac).
Use the OUT jack to pass the POWER TRIGGER signal to another Pro15SW. Voltage
will be present on the output jack whenever the amplifier is active. This is indicated
by the green LED on the front panel.
NOTE: FOR A HOME THEATER RECEIVER NOT EQUIPPED WITH A POWER TRIGGER OUTPUT,
CONSIDER USING A NILES 12-VOLT POWER SUPPLY AS A TRIGGER SIGNAL THAT IS
ACTIVATED VIA A SWITCHED AC OUTLET ON THE RECEIVER. SEE FIGURE 9 ON PAGE 14
FOR CONNECTION DETAILS.
2. MOVIE MODE TRIGGER: For external movie/music mode triggering, use a mini (3.5
mm) plug to connect the IN jack to a movie trigger signal from a home theater
surround processor or receiver. The 3 to 30 Vdc (or Vac) signal will set the Pro15SW
to movie mode, while a 0 Vdc (or Vac) signal will keep it in the music mode. Again, tip
is positive. Use the OUT jack to pass the movie trigger signal to another Pro15SW.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: ON THE FRONT PANEL IF SETUP (SEE FIGURE 3 ON PAGE 7) SWITCH IS SET TO
MUSIC, A 3 TO 30 VDC (OR VAC) TRIGGER SIGNAL WILL CHANGE OPERATION OVER TO THE
MOVIE MODE. IF THE SETUP SWITCH IS ALREADY SET TO MOVIE, A TRIGGER SIGNAL HAS NO
EFFECT, SINCE THE MODE IS ALREADY SET TO MOVIE.
NOTE: FOR A HOME THEATER RECEIVER NOT EQUIPPED WITH A MOVIE/MUSIC TRIGGER
OUTPUT, CONSIDER ADDING A NILES HOME THEATER AUTOMATION SYSTEM OR A NILES
MAIN SYSTEM UNIT. SEE FIGURE 9 ON PAGE 14 FOR CONNECTION DETAILS.
3. (Auto) POWER Switch: Use the ALWAYS ON mode to leave the Pro15SW always on.
Use the MUSIC/VOLTAGE SENSE mode to automatically power on the Pro15SW when
an audio signal or trigger voltage is present. When either signal is absent for 15
minutes, the Pro15SW will enter the standby mode.
NOTE: THE ALWAYS ON AND MUSIC/VOLTAGE SENSE SETTINGS ARE ONLY ACTIVE AFTER
(MASTER) POWER IS SET TO ON (SEE #8 BELOW).
4. AUDIO IN jacks: Use these gold-plated line-level RCA input jacks to connect line-
level stereo and LFE audio signals from a home theater Processor or receiver. The
LFE (Low Frequency Effects) input is unfiltered.
5. AUDIO OUT jacks: Use these gold-plated line-level RCA output jacks to connect
line-level stereo and LFE audio signals to drive another Pro15SW. The LFE output is
unfiltered, but the L/R output signals are routed through the variable (60 to 160 Hz)
HIGH-PASS filter, and the response will be contoured according to filter settings (see
Figure 4 on page 8).
6. Loudspeaker IN Binding Posts: As an alternative to the AUDIO IN jacks, use the
loudspeaker-level, gold-plated, five-way binding posts to connect loudspeaker-level,
stereo audio signals from a home theater, receiver or whole-home audio system.
For additional connection details, see FINISHING THE INSTALLATION on
page 15.
NOTE: DO NOT USE THESE CONNECTIONS WHEN USING THE LINE-LEVEL INPUTS.
7. Loudspeaker OUT Binding Posts: As an alternative to the AUDIO OUT jacks, use the
loudspeaker-level, gold-plated, five-way binding posts to connect loudspeaker-level,
stereo audio signals to drive your front L/R satellite loudspeakers. These signals are
routed through a fixed, 100 Hz (6 dB per octave) high-pass filter and the response
will be contoured accordingly.
NOTE: THERE WILL ONLY BE A SIGNAL ON THESE CONNECTIONS IF THE LOUDSPEAKER IN
BINDING POSTS WERE USED.
8. (Master) POWER Switch: Use this control to power on/off the PRO15SW.
9. Detachable IEC Power Cord and Built-In Fuse. If needed, replace the fuse with same
type, as follows:
■ For 115/120 Vac @ 60 Hz, use a T7AL 250V - 230V fast-blow fuse.
■ For 230/240 Vac @ 50 Hz, use a T15AL 250V - 115V fuse.
(CONTINUED ON NEXT PAGE)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND CONNECTORS (CONTINUED)
APPLICATIONS
The StageFront Pro15SW 15-inch High-Power Home Theater Powered Subwoofer
is very flexible and can be configured for use in various applications with
associated external audio components, as shown in Figures 5 through 9. For
other Pro15SW applications, consult your local Niles dealer for help in configuring
your home theater system
PRO15SW IN A TYPICAL THEATER INSTALLATION
Set switch to ON and adjust FREQUENCY Position SET UP switch
Adjust PHASE to
integrate subwoofer
sound with system.
Set LOW PASS to closely
match HIGH PASS
FREQUENCY control.
NOTE: Control does not
function when using LFE input.
to match low frequency cutoff of your
satellite loudspeakers.
to the mode you wish to
adjust MUSIC OR MOVIE
and adjust level controls
per instructions.
Alternate configuration:
Set switch to OFF to send full range
audio to L/R AUDIO OUT jacks.
,%6%,
,/7 0!33
0(!3%
()'( 0!33
ꢁꢁꢀ(Z
ꢇ
ꢇ
3%4 50
-53)#
ꢄꢀ(Z
ꢆꢀŽ
0/
0''
-/6)%
ꢀ
ꢁꢀ
-/6)%
ꢀ
ꢁꢀ
-53)#
ꢂꢀ(Z ꢁꢃꢀ(Z
'3&26&/$:
ꢀŽ
ꢁꢄꢀŽ
ꢅꢀ(Z ꢁꢅꢀ(Z
'3&26&/$:
LFE Output
Pro15SW Back
Optional
Refer to Trigger Wiring section
Left & Right line
level output
LFE
L
R
Home
Theater
Receiver
Do NOT use these when
using the AUDIO IN ports
Pro2770LCR
Pro2770LCR
Pro2770LCR
Loudspeaker level
Pro770Fx
Pro770Fx
Loudspeaker level
Figure 5. Line level connections
10
Download from Www.Somanuals.com. All Manuals Search And Download.
PRO15SW AND LOUDSPEAKER-LEVEL CONNECTION TO SATELLITE LOUDSPEAKERS
Set switch to ON and adjust FREQUENCY Position SET UP switch
Adjust PHASE to
integrate subwoofer
sound with system.
Set LOW PASS to closely
match HIGH PASS
FREQUENCY control.
NOTE: Control does not
function when using LFE input.
to match low frequency cutoff of your
satellite loudspeakers.
to the mode you wish to
adjust MUSIC OR MOVIE
and adjust level controls
per instructions.
Alternate configuration:
Set switch to OFF to send full range
audio to L/R AUDIO OUT jacks.
,%6%,
,/7 0!33
0(!3%
()'( 0!33
ꢁꢁꢀ(Z
ꢇ
ꢇ
3%4 50
-53)#
ꢄꢀ(Z
ꢆꢀŽ
0/
0''
-/6)%
ꢀ
ꢁꢀ
-/6)%
ꢀ
ꢁꢀ
-53)#
ꢂꢀ(Z ꢁꢃꢀ(Z
'3&26&/$:
ꢀŽ
ꢁꢄꢀŽ
ꢅꢀ(Z ꢁꢅꢀ(Z
'3&26&/$:
Refer to Trigger Wiring section
Do NOT use these when using
the LOUDSPEAKER ports
Left & Right loudspeaker outputs
Home Theater
Receiver
Pro2770LCR
Pro2770LCR
Figure 6. Connecting satellite loudspeakers
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TWO PRO15SWS AND SATELLITE LOUDSPEAKER SYSTEM
Set switch to ON and adjust FREQUENCY Position SET UP switch
Adjust PHASE to
integrate subwoofer
sound with system.
Set LOW PASS to closely
match HIGH PASS
FREQUENCY control.
NOTE: Control does not
function when using LFE input.
to match low frequency cutoff of your
satellite loudspeakers.
to the mode you wish to
adjust MUSIC OR MOVIE
and adjust level controls
per instructions.
Alternate configuration:
Set switch to OFF to send full range
audio to L/R AUDIO OUT jacks.
,%6%,
,/7 0!33
0(!3%
()'( 0!33
ꢁꢁꢀ(Z
ꢇ
ꢇ
3%4 50
-53)#
ꢄꢀ(Z
ꢆꢀŽ
0/
0''
-/6)%
ꢀ
ꢁꢀ
-/6)%
ꢀ
ꢁꢀ
-53)#
ꢂꢀ(Z ꢁꢃꢀ(Z
'3&26&/$:
ꢀŽ
ꢁꢄꢀŽ
ꢅꢀ(Z ꢁꢅꢀ(Z
'3&26&/$:
NOTE: ADJUST SETTING ON BOTH PRO15SW SUBS TO BE THE SAME
Home Theater
Receiver
L
R
Trigger output
Line Level outputs
Pro15SW Back
Pro15SW Back
Line Level inputs
L
R
Niles SI-2125
Amplifier
Loudspeaker level outputs
Optionally, you may wire
in a similar fashion using
the loudspeaker level
inputs and outputs.
Pro2770LCR
Pro2770LCR
Figure 7. Stereo/dual subwoofer application
12
Download from Www.Somanuals.com. All Manuals Search And Download.
PRO15SW AND LOUDSPEAKER LEVEL CONNECTION TO SATELLITE
LOUDSPEAKERS
Position SET UP switch Control not Set LOW PASS to
Adjust PHASE to
integrate subwoofer
sound with system.
to the mode you wish to
adjust MUSIC OR MOVIE
and adjust level controls
per instructions.
used
about 100Hz.
,%6%,
,/7 0!33
0(!3%
()'( 0!33
ꢇ
ꢇ
3%4 50
-53)#
ꢄꢀ(Z
ꢆꢀŽ
ꢁꢁꢀ(Z
0/
0''
-/6)%
ꢀ
ꢁꢀ
-/6)%
ꢀ
ꢁꢀ
-53)#
ꢂꢀ(Z ꢁꢃꢀ(Z
'3&26&/$:
ꢀŽ
ꢁꢄꢀŽ
ꢅꢀ(Z ꢁꢅꢀ(Z
'3&26&/$:
Refer to Trigger Wiring section
Do NOT use these port when using
the Loudspeaker ports
Loudspeaker level outputs
R
L
Niles SI-2125
Pro15SW Back
Left satellite
loudspeaker
Right satellite
loudspeaker
Figure 8. Loudspeaker level connections
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PRO15SW AND SATELLITE LOUDSPEAKER SYSTEM WITH EXTERNAL POWER
AND MODE TRIGGERS
Optional
When using the system trigger,
set this switch to MUSIC/
VOLTAGE SENSE
Trigger Input
Optional Second Subwoofer
Trigger Outputs
Home Theater
Receiver
Pro15SW Back
Refer to system audio
wiring sections.
To other Home theater
equipment that is to be
triggered on when Movie
mode is active.
12V DC
Trigger
input
Figure 9. Trigger connections
14
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHING THE INSTALLATION
ADJUSTING THE FEET
The Pro15SW is equipped with four adjustable spike feet that include large slip-on
rubber covers. At the final placement site adjust the feet/spikes as follows:
■ On hard floors (e.g., wood, tile, etc.), check the Pro15SW’s stability and if needed,
adjust the rubber feet one at a time until the cabinet is level.
■ On carpeted floors, tilt the Pro15SW up and remove each rubber cover. Check the
Pro15SW’s stability and if needed, adjust the spikes one at a time until the cabinet
is level.
CONNECTING THE PRO15SW
Connect the Pro15SW according to your application (see APPLICATIONS on
page 10). Use high-quality RCA cables for all line-level connections (see CONTROLS
AND CONNECTORS on page 7). For applications with loudspeaker-level connections,
perform the following steps:
1. At each Pro15SW loudspeaker-level connection, separate the loudspeaker wire so
that at least 2 inches of each conductor are free. Strip away 1/4 inch of insulation
from each loudspeaker wire. Using correct polarity, connect the appropriate
conductor to each five-way binding post.
NOTE: OBSERVE CORRECT POLARITY: POSITIVE (+) GOES TO THE RED POST AND NEGATIVE (–) GOES
TO THE BLACK POST. IF YOU ARE UNSURE OF WIRE POLARITY, SEE THE SECTION, CHECKING PHASE
ON THE SATELLITE LOUDSPEAKERS, ON PAGE 16.
2. Connect the other end of the loudspeaker wires to the home theater receiver (or
amplifier) and satellite loudspeakers in the same way.
3. Turn on the home theater receiver and calibrate all loudspeakers in the system
according to the receiver (or surround processor) manufacturer’s instructions.
SETTING UP THE PRO15SW
After making all the connections and calibrating the loudspeakers, set up the
Pro15SW by performing the following steps (see CONTROLS AND CONNECTORS on
page 7 for information on control operation):
1. On the rear panel, set the (Master) POWER switch to ON. Depending on your
application set the (Auto) POWER switch to ALWAYS ON or MUSIC/VOLTAGE SENSE.
2. On the front panel, set the following controls (and switches) to their initial positions:
(CONTINUED ON NEXT PAGE)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
■ HIGH PASS FREQUENCY control (if applicable) = 160 Hz (or value
recommended by satellite loudspeaker manufacturer)
■ HIGH PASS ON/OFF switch = ON
■ LEVEL SETUP switch = MUSIC
■ MUSIC LEVEL control = 5
■ MOVIE LEVEL control = 5
■ LOW PASS FREQUENCY control = 120 Hz
■ PHASE control = 0°
3. While playing a favorite music track, adjust your system’s volume control to a
comfortable level and listen to the bass level at your favorite listening position (e.g.,
couch). Next, move the LEVEL SETUP switch to MOVIE and play a favorite movie
chapter. Listen to the bass level, and, if desired, adjust the MOVIE LEVEL control to
change the movie bass level to taste.
4. Move the LEVEL SETUP switch back to MUSIC and play the music track again. If
desired, adjust the MUSIC LEVEL control to taste.
5. Continue listening to your favorite music and movie sources using the appropriate
setting for LEVEL SETUP. If you want a more solid-sounding bass (with less
overtones), try moving the LOW PASS FREQUENCY control toward the lower
frequencies. Experiment with different frequency settings until you find one that
sounds best. If needed, readjust the MOVIE LEVEL and MUSIC LEVEL controls (see
steps 3 and 4 above).
6. Continue listening to your favorite music and movie sources using the appropriate
setting for LEVEL SETUP. Try experimenting with the PHASE control until you find its
optimum setting. Depending on the Pro15SW’s placement, the bass should sound
more pronounced when the phase has been optimized.
CHECKING PHASE ON THE SATELLITE LOUDSPEAKERS
Loudspeaker wire has two conductors. On applications with satellite loudspeakers,
one conductor is attached to a component’s negative (–) terminal, while the other is
attached to a component’s positive (+) terminal. Usually, the wire is marked for your
convenience, but the marking can be done in the following different ways:
■ Stripe on one wire
■ Ribbed area you can feel on one conductor
■ Different colors of metal wire on each conductor
■ Fabric strand or string wound into one of the conductors
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Of course, there are some wires that appear completely identical. So be careful,
or you might make a connection mistake. If you do, one satellite loudspeaker
will be playing “out-of-phase” with the other loudspeaker. A pair of out-of-phase
loudspeakers works against each other, and the sound of the two playing together
will be lacking in bass and sound “phasey.” If you suspect the sound is not right,
and you cannot see any markings on the wire, try this simple test:
1. Stand halfway between the satellite loudspeakers.
2. Play some music with the amplifier or receiver set to Mono.
3. Listen to the richness of the bass and the loudness of the sound.
4. Turn off the amplifier and reverse the connections on one (Left or Right) of the
Pro15SW Loudspeaker OUT binding post pairs.
5. Repeat the listening test with the same volume control setting. When the sound has
a richer bass and is slightly louder, the satellite loudspeakers are working together
or “in-phase.”
INSTALLING AND REMOVING THE GRILLE
■ To install the grille, start with one corner and gently press the grille frame around
the Pro15SW’s edge, pushing it in at each of the four recessed holes. When properly
installed, the grille will be approximately 1 inch away from the cabinet.
■ To remove the grille, start with one corner and gently pull the grille frame away from
the Pro15SW’s edge at each of the four recessed holes. Store the grille in a safe
place for future use.
CLEANING
Use a dampened soft cloth or paper towel to clean the cabinet and grille.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Driver Complement
15-inch Interlaced Carbon-Fiber Woofer with Cast Aluminum Frame and Butyl-Rubber Surround
Amplifier Power
1,000 Watts (rms) at less than 1% distortion
Frequency Response
25 to 125 Hz, +/- 3 dB
Power Requirements
120 Vac, 60Hz or 220-240 Vac, 50-60Hz
Overall Dimensions
17-1/2” W x 25” H x 24-3/4” D*
*Includes grille Depth is 23-3/8” without grille
Weight
108 lbs
Certification
Meets FCC Part 15 and ICES-003, Class B for USA and Canada
CSA Listed and tested under UL/EN60065 standard
CE compliant for the EU
C-Tick compliant for Australia and New Zealand
18
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC INSTRUCTIONS TO THE USER
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
■ Consult the dealer or an experienced radio/TV technician for help.
This equipment has been verified to comply with the limits for a class B computing
device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations,
shielded cables must be used with this equipment. Operation with non-approved
equipment or unshielded cables is likely to result in interference to radio and TV
reception. The user is cautioned that changes and modifications made to the
equipment without the approval of manufacturer could void the user’s authority to
operate this equipment.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
20
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY REGISTRATION CARD
Model Purchased_________________________________________________________
Serial Number ___________________________________________________________
Date Purchased (month/day/year)_____________________________________________
Dealer Name and Location __________________________________________________
______________________________________________________________________
❍
❍
❍
❍
❍
Dr.
Miss
Mr.
Mrs.
Ms.
Name__________________________________________________________________
Address________________________________________________________________
______________________________________________________________________
City_______________________________________State________________Zip______
Telephone (
)_______________________email______________________________
Please take a moment to fill out our warranty registration card. The information helps us to get to
know you better and develop the products you want
Age:
Musical tastes:
(Please check
all that apply)
What magazines
do you read?
Do you . . . ?
❍
❍
Under 25
Own a House. If yes,
❍
❍
❍
❍
25-34
1. ________________
how many square feet?
❍
35-44
Alternative
2. ________________
3. ________________
❍
45-54
55 & over
Classical
❍
Country
❍
Own a Town House/
❍
Jazz
Condominium/Co-op
Income:
❍
New Age
❍
Rent an Apartment
Rent a House
Who will install
the product?
❍
Under $44,999
❍
Popular
❍
❍
❍
❍
❍
❍
❍
❍
$45,000-$59,999
$60,000-$74,999
$75,000-$99,999
$99,999-$150,000
$150,000-$99,999
$99,999-$200,000
Over $200,000
❍
R&B
❍
Custom Installer
❍
Rock
Are you interested in
receiving literature on
other Niles products?
❍
Electrician
❍
Other _____________
❍
Friend
Myself
❍
How did you hear
about Niles?
❍
❍
Yes
No
Which factor(s) influenced
the purchase of your Niles
product? (Please check
all that apply)
❍
Architect/Developer
Are there products/
capabilities that you would
like to see introduced?
❍
Custom Installer
❍
Occupation:
Direct Mail
❍
❍
Arts/Entertainment
Friend/Family
❍
Ease of Use
❍
❍
Business Owner
In-Store Display
❍
Price/Value
❍
❍
Engineer
Interior Designer
❍
Product Features
❍
❍
Finance/Accounting
Magazine Ad
❍
Quality/Durability
❍
❍
General Office
Mail-Order Catalog
❍
Reputation
❍
❍
Management
Newspaper Ad
❍
Style/Appearance
❍
❍
Professional
Product Brochure
❍
Warranty
❍
❍
Sales/Marketing
Product Review
❍
❍
Student
Retail Salesperson
❍
❍
Tradesperson
Internet
❍
Other
21
Download from Www.Somanuals.com. All Manuals Search And Download.
©2011 The AVC Group, LLC. All rights reserved. Niles and the Niles logo are registered trademarks of
The AVC Group, LLC. Stagefront Home Theater Solutions is a trademark of The AVC Group, LLC.
All other trademarks are the property of their respective owners. DS00544A
Download from Www.Somanuals.com. All Manuals Search And Download.
|