ECHNICAL INFORMATION
PRODUCT
T
P 1/ 8
Model No.
Description
BLM430, LM430D
430mm Cordless Lawn Mower
H
CONCEPT AND MAIN APPLICATIONS
Models LM430D, BLM430, (HML01)*1 is Cordless Lawn mower equipped
with rotary blade cutting system.
Its main benefits are:
L
W
• Environment-friendly with zero emission and minimum noise pollution
• Compatible with both Makita 36V-2.6Ah Li-ion battery BL3626
and 36V-2.2Ah Li-ion battery BL3622A
• Compatible with Battery converters, BCV01 and BCV02
• Adjustable 13 cutting heights from 20mm to 75mm
• The storage space can be saved by standing the machine on its rear
end (See illustrated right.)
Dimensions: mm (inch)
minimum
maximum
1,450 (57)
Length (L)
1,490 (58-3/4)
460 (18-1/8)
Width (W)
Height (H)
minimum 950 (37-1/2)
maximum 1,020 (40-1/4)
• Handle height is adjustable in 2 stages
This product is available in the variations listed below.
Battery
Battery Battery
cover converter
Model No.
LM430DZ
Charger
No
810 (32)
(without Rear bag)
Type
No
Quantity
No
1
No
No
1
No
No
LM430DWB DC36WA BL3622A
LM430DWBE DC36WA BL3622A
490~500
(19-1/4~19-3/4)
2
No
460 (18-1/8)
BLM430Z
No
No
No
1
No
No
1
No
BLM430RD
DC36RA BL3626
No
BLM430RDE DC36RA BL3626
2
No
BLM430ZX2C
No
No
No
No
No
No
1
No
No
No
BCV02
No
HML01Z*1
HML01C1*1 DC36WA BL3622A
No
Note: All models also include the accessories listed below of "Standard equipment".
Specification
Cell
Li-ion
36V
2.2/ 2.6
Standard equipment
Voltage: V
Capacity: Ah
Socket wrench ........................................ 1
Blade 430 .............................................. 1
Battery
60 with DC36WA/
22 with DC36RA
580
Note: The standard equipment for the tool
Charging time (approx.): min.
shown above may vary by country.
Max output (W)
No load speed: min.ˉ¹=rpm*2
3,600
Rotary type 2 tooth blade
24.0 (15/16)
Optional accessories
Type
Blade
Battery 3622A
Inner diameter: mm (")
Battery BL3626
Cutting width: mm (")
430 (17)
20 - 75 (13/16 - 2-15/16),
13 stages
Charger DC36WA
Fast charger DC36RA
Battery converter BCV01
Battery converter BCV02
Cutting height adjustment range: mm (")
Electric brake
Soft start
Yes
Yes
Weight according to
EPTA-Procedure 01/2003*3: kg (lbs)
18.1 (39.9)*4,
17.9 (39.4)*5
*2: No load speed of the cutting tool
*3: with battery, blade, grass bag
*4: for North and Central American countries
*5: All countries except North and Central American countries
Download from Www.Somanuals.com. All Manuals Search And Download.
P 3/ 8
Repair
[2] ASSEMBLY/ DISASSEMBLY
[2]-1. Handle section (cont.)
ASSEMBLING
Assemble Handle section in the reverse order of disassembly.
Note: • Face the top of Lever to the upper side when assembling Lever to Switch lever. (Fig. 7)
While holding the insert nut on lever so as not to separate, assemble Lever to Switch lever with M4x20 Pan head
screw with WR.
• Be careful to the direction of Compression spring 9. Refer to Fig. 6 in the previous page.
• Assemble Lower pipe to Upper pipe complete so that the two holes of Lower pipe come to Switch box side. (Fig. 8)
• Route Power supply cord along Lower pipe, and fix it in the lower holders of two Holders 9-19, then pass it over
Lower pipe near the hinge. (Fig. 8)
Fig. 7
Fig. 8
Switch lever
The top of Lever
faces the upper side.
Holder 9-19
Switch box
Insert nut
Lever
The holes of Lower pipe
to attach Holders 9-19
Download from Www.Somanuals.com. All Manuals Search And Download.
P 4/ 8
Repair
[2] ASSEMBLY/ DISASSEMBLY
[2]-2. Motor section
REPLACING
(1) Remove Blade.
(2) Pull Lock lever to release the locking of Battery cover complete, and then open Battery cover complete. (Fig. 11)
Remove the hinge of one side carefully, and separate it from Cowling. (Fig. 12)
And then, remove the other hinge in the same way.
(3) Remove Grip A by unscrewing two 5x25 Tapping screws. (Fig. 13)
(4) Remove six 4x18 Tapping screws. Shift Change lever to the position of Cutting height between 40 and 60mm. (Fig. 14)
(5) Pass Terminal housing through the square hole of Cowling without disconnecting the lead wires as drawn in Fig. 15.
Cowling can be removed toward the upper direction. (Fig. 15)
(6) Remove three M6x30 Pan head screws. DC motor can be replaced. (Fig. 16)
Fig. 11
Fig. 12
Battery cover complete
2
1
Fig. 13
Grip A
5x25 Tapping screw
hinges of Cowling with
Battery cover complete
Fig. 15
Terminal housing
Cowling
Square hole
of Cowling
Fig. 14
4x18 Tapping
screw (6 pcs.)
Fig. 16
DC motor
Terminal
housing
M6x30 Pan head
screw with WR
(3 pcs.)
Change lever
Download from Www.Somanuals.com. All Manuals Search And Download.
P 5/ 8
Repair
[2] ASSEMBLY/ DISASSEMBLY
[2]-3. Change lever section
DISASSEMBLING
(1) Remove Cowling. (Refer to the previous page.)
(2) Shift Change lever to the position of grass cutting height 75mm.
(3) Detach the hook of Tension spring 16 from the projection of Deck using long-nose pliers. (Fig. 17)
(4) Put a wood under Deck to raise Wheels from the ground. (Fig. 18)
(5) Unscrew two 4x18 Tapping screws, and separate the pin of Connecting rod from the hole of Change lever,
and then remove Change lever section from Deck toward DC motor side. (Fig. 19)
(6) Remove Change lever cover, and then separate screws, bolt and nut as drawn in Fig. 20.
ASSEMBLING
Assemble Change lever section in the reverse order of disassembly.
Note: Lift Connecting rod and insert the pin into the hole of Connecting rod. (Fig. 21)
Fig. 19
Fig. 17
Change lever
Adjust plate
projection of Deck
hook of
Tension
spring 16
Long-nose
pliers
Change lever
4x18 Tapping screw
(2 pcs.)
Fig. 18
Fig. 20
Flat washer 4
Compression spring 9
Flat washer 9
4x18 Tapping
screw
Change lever
Change
lever
cover
M6 Hex nut
Sleeve 6
Wood
4x18 Tapping
screw (2 pcs.)
M6x30
Hex bolt
Adjust plate
Fig. 21
hole of Change lever
Connecting rod
pin of Connecting rod
Download from Www.Somanuals.com. All Manuals Search And Download.
P 6/ 8
Repair
[2] ASSEMBLY/ DISASSEMBLY
[2]-4. Wheels
DISASSEMBLING
(1) Pull Front wheel caps straight out of Front wheels. (Fig. 22) Remove Rear wheel caps in the same way.
(2) Remove M8 Collared hex nuts and Front wheels from Front shaft. (Fig. 23)
Separate Rear wheels from Rear shaft in the same way.
(3) Tap the edge of each wheel with plastic hammer. Ball bearings 6200ZZ in the wheels are removed. (Fig. 24)
(4) Press each Plane bearing 10 out of the wheels with 1R285 as drawn in Fig. 25.
ASSEMBLING
Assemble each wheel section in the reverse order of disassembly. Refer to Fig. 26.
Fig. 22
Fig. 23
Fig. 24
Front wheel cap
Ball bearing
6200ZZ
M8 Collared
hex nut
Front wheel
Front
wheel
Fig. 25
Fig. 26
Arbor press
1R285
Ball bearing
6200ZZ
Front wheel
Plane bearing 10
M8 Collared hex nut Front wheel cap
[2]-5. Connecting rod, Shafts
DISASSEMBLING
(1) Remove the assembled part of Lower pipe and Upper pipe complete.
(Refer to [2]-1. Handle section.)
(2) Remove Cowling. (Refer to [2]-2. Motor section.)
(3) Remove the assembled part of Change lever and Adjust plate.
(Refer to [2]-3. Change lever section.)
(4) Remove Front wheels and Rear wheels. (Refer to [2]-4. Wheels.)
As for the specifications for North America, remove two 4x18
Tapping screws and Protective shield. (Fig. 27)
Fig. 29
4x18 Tapping screw (4 pcs.)
(5) Loosen two M5-8 Hex lock nut and remove Connecting rod. (Fig. 28)
(6) Loosen six 4x18 Tapping screws. Front shaft and Rear shaft can be
removed. (Fig. 29)
Front shaft
Fig. 28
Fig. 27
M5-8 Hex lock nut (2 pcs.)
on Connecting rod
4x18 Tapping Proactive
screw (2 pcs.) shield
Rear shaft
4x18 Tapping screw (2 pcs.)
[ North America only]
Download from Www.Somanuals.com. All Manuals Search And Download.
P 7/ 8
Repair
Fig. 30
[2] ASSEMBLY/ DISASSEMBLY
[2]-5. Connecting rod, Shafts (cont.)
Rear shaft
ASSEMBLING
Front shaft
Assemble each wheel section in the reverse order of disassembly.
Distinguish Front shaft from Rear shaft by the white paint. (Fig. 30)
white paint
Circuit diagram
Fig. D-1
Color index of lead wire’s sheath
Switch
Black
White
Red
Orange
Blue
Yellow
Lock key
Lead unit
Line filter
Terminal
DC motor
Controller
Wiring diagram
Fig. D-2
Connect Lead wires as drawn below.
Pass them through the square hole of Cowling.
Route Lead wires in Switch box as drawn below so as not to
be pinched between ribs / bosses.
Tension spring 9
Switch lever
Power
supply
cord
M4x20 Pan
head screw
Lever
Download from Www.Somanuals.com. All Manuals Search And Download.
P 8/ 8
Wiring diagram (cont.)
Fig. D-3
To Switch
Terminal
Fix Lead wires (black, white) in
these Lead wire holders.
Connect Flag
receptacles as
drawn above.
Be careful to
the directions.
Lead unit
Controller
Fix Lead wires (red, blue) in
these Lead wire holders.
Fix Lead wires (red) in
these Lead wire holders.
Fix Lead wires (blue) in
these Lead wire holders.
DC motor
All Connectors, Line filters and Controller must be set in place using ribs on Deck as drawn above.
Be careful not to put any Lead wires on ribs drawn above.
Download from Www.Somanuals.com. All Manuals Search And Download.
|