Honda Automobiles Accord Accessory HandsFreeLink 2008 User Manual

Accessory HandsFreeLink^TMUser’s Information Manual

Contents

A Few Words About Safety .................................................................................. 2

Introduction .......................................................................................................... 4

Setup.................................................................................................................. 11

Making a Call ..................................................................................................... 18

Phonebook......................................................................................................... 19

Help .................................................................................................................... 23

Product Functions .............................................................................................. 24

Troubleshooting.................................................................................................. 26

Index .................................................................................................................. 32

Introduction

Thank you for purchasing this Honda accessory.

Please read this User’s Information Manual carefully before using the Accessory

HandsFreeLink^TM, and keep this manual in the glove box for future reference.

This Accessory User’s Information Manual should be considered a permanent part of the vehicle. It

should remain with the vehicle at all times and stay with the vehicle when sold.

This Accessory User’s Information Manual contains important information about the safe operation

of the Accessory HandsFreeLink (HFL). We urge you to read this manual carefully, become familiar

with the controls it describes, and follow its recommendations to help make your driving trouble-free

and enjoyable.

Introduction

What is Accessory HandsFreeLink?

Accessory HandsFreeLink (HFL) is a state-of-the-art, integrated, hands-free phone communication system for

your vehicle. Accessory HFL utilizes Bluetooth^®wireless technology and Bluetooth hands-free profiled cell

phones to improve cell phone use and convenience. Accessory HFL eliminates the need to hold a cell phone,

wear a headset or earpiece, or use an in-vehicle mounted handset adapter while making or receiving phone

calls. Accessory HFL is easy to use because it is voice activated.

What cell phones will work with Accessory HFL?

Due to the versatility of Bluetooth wireless technology, not all cell phones share the same Bluetooth “profile”

and may not work properly with Accessory HFL. Only cell phones that are Bluetoothenabled and support a

“hands-free” profile are compatible with Accessory HFL.You can go to handsfreelink.honda.com to see a list of

compatible cell phones.

Problems or questions about pairing your cell phone, or any questions about Accessory

HFL.

If you have any questions or problems pairing your cell phone, or any questions about using Accessory HFL,

contact JCI Technical Support at 1-800-782-9533.

Customer Contact Information

Reference

USA

JCI

1-800-782-9533

Technical Support

handsfreelink.honda.com

Web Site

Introduction

Safety Precautions - Please Read

Be Safe. When using a cellular device in a vehicle, the vehicle operator is solely responsible for operating the

vehicle in a safe manner. Vehicle operators must be aware of all pertinent driving conditions at all times. An

accident or collision resulting in property damage, personal injury, or death could occur if the operator of the

vehicle fails to pay attention to travel conditions and vehicle operation while the vehicle is in motion.

DO NOT attempt to program, adjust, or set up your Accessory HFL unit while the vehicle is moving.Your

vehicle should be in park with the parking brake engaged, and with the ignition turned to the ON or

ACCESSORY position.

DO NOT program, attempt to program, adjust, or set up your Accessory HFL unit while the vehicle is inside an

enclosed area and the engine is on.

Introduction

Getting Started

Fully charge your cell phone’s battery before programming your Accessory HFL unit to ensure that the

wireless electronic connection will be established with minimal difficulty.

Try to maintain a fully charged cell phone battery when using Accessory HFL.

Accessory HFL will not increase or decrease your cell phone’s signal strength because it operates using the

same signal as your cell phone.

Keep your cell phone on and inside of your vehicle’s interior cabin so it can transmit properly to Accessory

HFL.

Do not place your cell phone in a metal box or similar container.

The ignition switch should be turned to either the ACCESSORY or ON position for programming and operation

of Accessory HFL.

This Accessory HFL version is programmed for English translation only.

When using Accessory HFL, face the windshield and speak in your normal voice clearly without shouting. Do

not speak slowly or pronounce words more distinctly than you normally would.

Accessory HFL will automatically prompt you for a verbal response when the confirmation prompt feature is

turned on.

Introduction

Make sure the prompt feature is turned on on your Accessory HFL unit before programming or when following

any “prompted” instructions outlined in this user guide.

You can say “Cancel” to return to the main menu or “Help” to hear a list of available options anytime Accessory

HFL prompts you for a response.

When using Accessory HFL, wait to speak until after the beep is heard which follows the appropriate prompt.

If no response is given to a Accessory HFL prompt, it will repeat the prompt two more times until the user

selects an option. If there is still no option selected, Accessory HFL will power down.

Introduction

Accessory HandsFreeLink UIB (User

Interface Board)

3. Speaker

4. Blue L.E.D. Light

•

A blue light comes on when the unit is

activated or there is an incoming call. It also

comes on when you are on a call.

5. VR (Voice Recognition) Button or Barge-in

Button

•

Push to input a command without having to

listen for a prompt.

731901AE

•

Push to transfer a call. This allows you to

transfer your call back to your cell phone in

case you want a privacy or are exiting the

vehicle.

Push to mute the phone.

Push to send Dual-Tone Multi-Frequency

(DTMF) tones.

1. Phone Button or Activation/Deactivation Button

•

Push to set up and program the unit.

Push to make a call.

Push to end a call.

•

Push to accept or reject an incoming call

when on an another call.

2. Volume Up and Down Buttons

6. Directional Microphone

•

Push (+) to increase the volume.

Push (-) to decrease the volume.

Push either button to the desired volume level

when the unit is not activated. Audible beeps

indicate the current volume level.

Introduction

Function Overview

Command 1

Call Name

CALL

Command 2

Location

Name in

Command 3

Location

Phonebook

Dial Number

DIAL

PHONEBOOK

Number

NEW ENTRY

EDIT

Name Location Number

Call Location

LIST NAMES

Edit Location Number

Delete Location

Continue

Name Location ALL

DELETE

ERASE ALL

REDIAL

EMERGENCY

SET UP

Pair a Phone

Delete a Phone

List Paired Phones

PHONE PAIRING

CONFIRMATION

PROMPTS

Phone ID Number

SELECT PHONE

HELP

Setup

power down.

Phone Pairing

3. Say “Phone pairing.”

You must first pair Accessory HFL (establish a

communication link) to your Bluetooth hands-free

profile cell phone. Please refer to your cell phone’s

operation manual for instructions on how to place

your cellular phone into a pairing mode before

starting the pairing process. In order to complete

successful pairing, both your cell phone and the

Accessory HFL module must be in a pairing mode

at the same time. Accessory HFL will remain in a

pairing mode for about 3 minutes before timing out.

4. After the system prompts you, say “Pair a

phone.” The system will remind you that pairing

should only be completed while the vehicle is in

park. When the vehicle is in park with the

parking brake engaged, say “Continue.”

5. The system will then ask you for a 4-digit PIN.

This can be any number you choose as long as

you enter the same number on the phone later.

Say your 4-digit PIN. For example: “One-Two-

Three-Four.”

1. Engage the parking brake on the vehicle.

2. Press and release the Accessory HFL PHONE

button and say “Set up.” For example, say “Set

up” at the Main menu and Accessory HFL

prompts “Select one of the following: phone

pairing, confirmation prompts, select phone, or

say cancel to return to the main menu.” If there

is no response to the prompts, Accessory HFL

reminds you of the selection two more times

until you select an option. If there is no option

selected after two repeats, Accessory HFL will

6. Follow your cell phone manufacturer’s

instructions for placing your cell phone in a

pairing mode.

7. Select BlueConnect on the phone. Then, on the

phone’s numeric keypad, enter the same PIN

number as entered in step 5.

Setup

8. Accessory HFL will prompt you for a phone

name. Name it something easy to remember.

Say the phone name, for example, “Jacob’s

phone.”

9. To complete the pairing process, Accessory

HFL will now ask you for a phone priority from 1

to 7. Number 1 is the highest priority. If two

phones are paired, Accessory HFL will use the

higher priority phone when both phones are

within range. Say the phone priority, for

example, “One.”

10. When complete, Accessory HFL will indicate

“Pairing Complete.”

Setup

4. Accessory HFL prompts you for the number

associated with the priority of the phone you

would like to clear. For example, say “One” for

“Jacob’s phone,” say “Two” for “Robin’s mobile.”

Say the number of the phone you wish to

delete.

Clear Paired Phones

You must clear a paired phone from Accessory HFL

in order to remove it from being paired. Accessory

HFL will respond with “Phone not available” if you

attempt to use a previously cleared phone to make

a call. If you make a mistake during the clearing

process or decide not to clear a phone, press the

Accessory HFL PHONE button or the VR button

and say “Cancel” to exit the clearing mode. To re-

prioritize cell phones you must first clear the

5. Accessory HFL responds with a verification to

clear the selected phone. If correct, say “Yes”

(say “No” to start the delete process over

again).

phone(s) paired with Accessory HFL and then pair

the phones again with the new desired priorities.

6. When complete, Accessory HFL indicates that

the phone or phones have been “Deleted.”

1. If you are not currently in a VR session or on a

phone call, press and release the PHONE

button and say “Set up.” Otherwise, go to the

main menu and say “Set up.”

2. Say “Phone pairing.”

3. After Accessory HFL prompts you, say “Delete

a phone.”

Setup

List Paired Phones

1. Press and release the Accessory HFL PHONE

button and say “Set up.” Accessory HFL will

prompt you with available options.

2. Say “Phone pairing.”

3. After Accessory HFL prompts you, say “List

paired phone.”

4. Accessory HFL lists the names of the cellular

phones that are currently paired with the

Accessory HFL module.

5. Accessory HFL asks if you want to start the list

over again.

6. Say “Yes” or “No.”

Setup

Confirmation Prompts

Confirmation prompts confirm your commands with Accessory HFL before they are carried out. When the

Accessory HFL confirmation prompts feature is ON, Accessory HFL will repeat the last command received

and ask whether the command received was correct before proceeding with the command execution.

Example with the confirmation prompts on and off.

Prompts

Off

You say,“Dial five-five-five-one-two-one-

two.”

You say,“Dial five-five-five-one-two-one-

two.”

Accessory HFL says,“Dialing five-five-

five-one-two-one-two, is this correct?”

Accessory HFL dials the number as

recognized. For example,“Dialing five,

five, five...”and then dials the number.

You say“Yes,”and Accessory HFL

places the call.You say“No,”and

Accessory HFL asks you to repeat the

number.

Setup

Turning the confirmation prompts ON and OFF

1. Go to the Accessory HFL main menu and say

“Set up.” Accessory HFL prompts you with

available options.

2. Say “Confirmation prompts.”

3. If the confirmation prompts are ON, Accessory

HFL will ask if you want to turn them OFF.

4. Say “Yes.” Accessory HFL will tell you that they

are OFF and says, “Ready.” Or if the

confirmation prompts are OFF, Accessory HFL

will tell you that they are OFF and will ask if you

want them to be turned ON.

5. Say “Yes” to turn them ON. Accessory HFL will

then return to the main menu.

Setup

5. Accessory HFL sets this phone to the highest

priority for the rest of the current ignition ON

cycle. Accessory HFL temporarily overrides the

phone priorities for the rest of the current

ignition ON cycle.

Select A Phone

This option is used to override the phone priority

given during pairing. For example, if you wish to use

phone 3 to make an outgoing call, you would

select phone 3 and make the call. This override only

works for the current ignition ON cycle. Accessory

HFL switches back to the highest priority phone

once the ignition is turned off.You can select a

phone using the VR button during a phone listing, or

by the select phone command.

Select phone by number.

1. At the main menu, say “Set up.” The system

prompts you with available options.

2. Say “Select phone.”

Select phone by name.

3. The system lists the available phones and asks

for the number of the phone. Say the number of

the phone.

1. At the main menu, say “Set up phone pairing.”

Accessory HFL prompts you with available

options.

4. Accessory HFL verifies the selected phone

name and asks if it is correct. Say “Yes” if

correct, or “No” if not.

2. Say “List paired phone.”

3. Accessory HFL lists all phones that are paired.

5. Accessory HFL sets this phone to the highest

priority for the rest of the current ignition ON

cycle. This temporarily overrides the phone for

the rest of the current ignition ON cycle only.

4. When the name of the desired phone is heard,

press and release the VR button and say

“Select.”

Making a Call

Using the Call Feature

2. Accessory HFL repeats the number it is dialing

and verifies that this is correct (if the

Calling a name or a name/location from

phonebook.

confirmation prompts are on) by saying “Dialing”

and then dials the number.

1. At the main menu, say “Call (any phone book

entry name).” If the name has more than one

location, Accessory HFL will ask for the location

to call.

Using the Redial Feature

1. At the main menu, say “Redial.”

2. Accessory HFL says, “Dialing,” and redials the

last number on the phone.

2. If just “Call” was used, Accessory HFL will say,

“Name please.” Say the name.

3. Say the location.

Using the Dial Feature

Dialing a phone number that is not in the

phonebook.

1. At the main menu, say “Dial (immediately

followed by the phone number),” or just say

“Dial” then say the phone number when

prompted.

Phonebook

Accessory HFL can store up to 32 names and 128

phone numbers. Each name has four locations

(Home, Work, Mobile, and Pager) associated with it.

6. Say the phone number for the name and

location. Accessory HFL repeats the phone

number and asks if it is correct. If so, it adds

the phone number for this name and location to

the phonebook and then says, “Number stored,

would you like to add another number for this

entry?”

Adding a new name and phone number to your

phonebook.

1. At the main menu, say “Phonebook.” Accessory

HFL prompts you for a new entry, edit, list

names, delete or erase all, or say “Cancel” to

return to the main menu. Say “New entry.”

7. Say “Yes” to add another number for this entry,

or say “No” if you are finished.

2. Say the name of the person you wish to add.

Accessory HFL repeats the name before

proceeding.

3. Accessory HFL asks for a location to go with

the name.

4. Say the location of the name: “Home,” “Work,”

“Mobile,” or “Pager.” Accessory HFL repeats the

location it heard.

5. Accessory HFL asks for the phone number for

the name.

Phonebook

Adding a new location for an existing name in

your phonebook.

Editing a phone number for an existing name/

location.

1. At the main menu, say “Phonebook, Edit.”

When prompted, say the name that you want to

edit. The system responds with “Home, Work,

Mobile, or Pager.”

1. At the main menu, say “Phonebook,” “Edit.”

When prompted, say the name and then the

location whose phone number you want to edit.

Accessory HFL will tell you the current phone

number.

2. Say the location (“Home,” “Work,” “Mobile,” or

“Pager”) and the phone number you wish to

enter in the phonebook for this name and

location.

2. Say the new phone number.

3. Accessory HFL verifies that it heard the

number correctly and stores the number. It will

then say, “Number changed, would you like to

call this number, edit another entry, or say

cancel to return to main menu?”

3. Accessory HFL verifies that it heard the

location correctly and asks for the phone

number for that location.

4. Say a phone number.

4. Say “Call,” “Edit,” or “Cancel” to return to the

main menu.

5. Accessory HFL verifies that it heard the

number correctly and stores the number. It will

then say, “Number changed, would you like to

call this number, edit another entry, or return to

main menu?”

6. Say “Call,” “Edit,” or “Return to Main Menu.”

Phonebook

Listing names in Accessory HFL phonebook.

7. Accessory HFL says who and where it is calling

and asks if this is correct (answer “Yes” or

“No”). If you say “Yes,” Accessory HFL

responds with “Dialing” and dials the selected

number.

1. At the main menu, say “Phonebook, List

Names.” The phonebook entries are listed.

2. At the end of the list, Accessory HFL asks,

“End of list. Would you like to start from the

beginning?” Say “Yes” to hear the phonebook

entry list again, or “No” if you do not want to

hear it again.

Deleting a phonebook name or location.

1. At the main menu, say “Phonebook, Delete.”

When prompted, say the name you wish to

delete.

3. After you hear the phonebook entry that you

want to call, press the Accessory HFL VR

button to stop the list process.

2. If only one location exists for the name,

Accessory HFL will verify that you want to

delete the name and location and then delete

the information.

4. Say “Call” to call the last name listed.

5. Accessory HFL gives the selected name and its

locations. It then asks for the location you want

to call.

3. If that name exists more than once with

different locations, Accessory HFL reads you a

list of locations for the name. Say the location

to delete or say “All” to delete all locations for

this name. Accessory HFL verifies that you

want to delete the location. (Answer “Yes” to

delete.)

6. Say the location you want to call.

Phonebook

Erasing all phonebook records.

4. Say “No” if you do not want to delete all

phonebook records. Accessory HFL exits from

the Erase All process. Say “Yes” to delete all

phonebook records. Accessory HFL deletes all

phonebook records and says, “Phonebook

erased.”

Use this command only if you want to erase (delete)

the entire phonebook. Accessory HFL prompts you

two times to verify you do want to delete the entire

phonebook.

1. At the main menu, say “Phonebook, Erase All”

to delete all phonebook records.

2. Accessory HFL responds, “Are you sure you

want to erase everything from your system

phonebook?” Say “No” if you do not want to

delete all phonebook records. Accessory HFL

exits the Erase All process.

3. Say “Yes” to delete all phonebook records.

Accessory HFL responds, “You are about to

delete everything from your system phonebook.

Do you want to continue?”

Help

Using the HELP feature to get Accessory HFL to

give you the available commands.

1. Press and release the Accessory HFL Phone

button.

2. After the beep, say “Help” any time Accessory

HFL is on. The module lists the available

commands for the current menu. For example,

say “Help” at the main menu and Accessory

HFL prompts, “Available options are Call, Dial,

Phonebook, Redial, Emergency, or Set Up.”

Product Functions

Call Reject

Emergency NOTE:

1. Use this feature to reject a second

•

Use this feature to dial 911.

incoming call.

2. Let the double-beep play three times.

1. Press and release the Accessory HFL

phone button and say “Emergency.”

2. Accessory HFL will dial 911.

THIS IS NOT A SAFETY, LIFESAVING,

OR AUTOMATIC EMERGENCY

RESPONSE FEATURE OR SYSTEM.

This feature, in order to function properly,

requires that a 911 service is available and

that Accessory HFL is paired to a cell

phone which is on and in the vehicle. It

also requires that the cell phone is able to

receive and transmit properly at the time

this feature is used.

Call Waiting

•

1. Use this feature to place a call on wait or

hold.

2. Press and release the VR button to place a

call on hold. Press and release it again to

retrieve the on hold call.

Digit String

1. Accessory HFL will allow you to send

“digits” as touch-tones (DTMF).

2. Use this feature in the event you need to

dial into voice mail or an automated

system.

3. Push VR button and number sequence and

then say “Send.”

4. Example:1-2-3-4-5-#-#- “Send”

Incoming Calls

1. If you are not on a call, the Accessory HFL

blue LED light will come on and the system

will announce the incoming call verbally.

2. If you are on a call, Accessory HFL will

announce the incoming call with a double-

beep.

Product Functions

Mute a Call

1. Press and release the VR button during the

4. When on a call, you can connect a second

incoming call by pressing and releasing the

Phone button after you hear two beeps.

call and say “Mute” to turn the mute feature

on. This mutes the in-car activity from the

person on the other end of the call.

Transfer a Call

1. Press and release the VR button during a

call and say “Transfer call.” This transfers

the call from Accessory HFL to your cell

phone.

2. Press and release it again and say “Mute

off” to turn the mute feature off.

Redial

1. Press and release the VR button and say

“Redial.” Accessory HFL will redial the last

number called on the cell phone.

2. Press and release the VR button again and

say “Transfer call” to transfer the call from

your cell phone back to Accessory HFL.

Three-Way Calling

Voice Recognition Button (VR)

1. Pressing and releasing the VR button

interrupts the system and tells Accessory

HFL to listen for a command.

1. This feature will not work unless your cell

phone has three-way calling capability.

2. Make your first call. Once connected-press

the VR button and say “Dial” or “Call.” This

places the first call on hold.

3. Make the second call. When connected,

press and release the Phone button after

you hear two beeps. This joins the two

calls. Press and release the Phone button

after one beep switches between calls.

2. Pressing and releasing the VR button does

not interfere with the person on the other

end of the call.

Troubleshooting

My phone will not pair.

Possible Solutions

Check

Make sure that the phone and vehicle ignition are ON. Also make sure that

your phone battery is charged.

Phone and Accessory HFL have power.

Your phone may not work with Accessory HFL. Only phones with

Bluetooth capability and a hands-free profile will work with

Accessory HFL. Phones that support the use of a wireless headset should

work with Accessory HFL.You can go to handsfreelink.honda.com and

view a list of approved Accessory HFL Bluetooth hands-free profile phones.

Refer to the phone’s pairing instructions and the Accessory HFL pairing

instructions.Try the pairing process again.

Phone is designed to work with Accessory HFL.

Phone was paired properly.

Try pairing again and tell the phone to connect.

On certain phone models, you need to tell the

phone to connect (after initiating the pairing

process on some models only).

Turn the phone’s Bluetooth option to ON.

Place phone inside the vehicle in the front seat area during the pairing

process.

Bluetooth option on your phone was turned ON.

Phone is not outside of the vehicle while trying

to pair it to Accessory HFL.

Make sure that it is installed. If not, install a SIM card.

Reprogram using the same 4-digit PIN for both PIN requests.

Phones that require a SIM card.

4-digit PIN number entered in the phone matches

the Accessory HFL PIN number.

Vehicle must be stopped and the parking brake engaged.

Vehicle check

Troubleshooting

A paired phone will not link/connect.

Possible Solutions

Check

Make sure that the phone and vehicle ignition are ON. Also make sure that

your phone battery is charged.

Phone and Accessory HFL have power.

Allow at least 60 seconds for the link to take place.

Phone and Accessory HFL have had adequate

time to“find”each other.

Use the Accessory HFL“Set Up”command at the main menu and then the

“Select Phone”command to link to the desired phone.

Accessory HFL was not“barred”from the

phone.

See your phone’s user guide for Bluetoothsettings.

Phone is set to automatically link/connect to the

Accessory HFL.

See your phone’s user guide for Bluetoothsettings.

Accessory HFL was not inadvertently set back to

the default (is not set to automatically

link/connect to the Accessory HFL).

I can’t receive incoming calls.

Possible Solutions

Check

Turn your vehicle ignition to the ON position.

Vehicle’s ignition is ON.

Press the PHONE button to answer an incoming call and not theVR button

on Accessory HFL.

Use the Accessory HFL“Set Up”command at the main menu and then

“Select Phone”command to link to the desired phone.

Place the phone inside of the vehicle to ensure a good connection.

You are pressing the correct button on

Accessory HFL to answer the call.

Phone is paired and linked to Accessory HFL.

Phone is not outside of the vehicle.

Troubleshooting

I can’t place a call.

Check

Possible Solutions

Phone is turned ON.

Turn your phone ON. Accessory HFL will only work when the paired cell

phone is turned ON.

The vehicle ignition is in the ON position.

You have an adequate cell phone signal.

Turn your vehicle ignition to the ON position.

Check the signal strength icon on your phone.You may have to wait until

you are in an area that provides you with a stronger signal before making

a call. Accessory HFL uses the signal going to the paired cell phone. It

does not increase or decrease cell phone signal strength.

Your phone may not be paired properly. See your phone user guide for

pairing instruction and try to pair your phone again. Use the“Set Up”

command on your Accessory HFL’s main menu and then the“Select

Phone”command to link to the desired phone.

Phone is paired and properly linked to

Accessory HFL.

You are inside of your coverage area.

Most calls can’t be made if you are outside of your coverage area.Your

Accessory HFL unit uses the same coverage area as the paired cell phone.

Try making a call again when you are in your coverage area. Check with

your phone provider if you are unsure about your coverage area.

Contact your cell phone service provider.

Mobile account is still active and has not been

cancelled.

Troubleshooting

I can hear but they can’t hear me.

Check

Possible Solutions

The phone’s signal strength.

Avoid using your phone and Accessory HFL in areas where the signal

strength is poor and unable to provide a good conversation in both

directions.

Call is not“muted”on the Accessory HFL unit.

Turn mute off on Accessory HFL by saying“Mute off”while in use.

The audio goes mute both ways during a call.

Check

Possible Solutions

You have not accidentally muted Accessory HFL.

Press the PHONE button to return to the call.

The audio quality is poor.

Check

Possible Solutions

The audio quality of your cell phone while not

using it with Accessory HFL.

If the audio quality is good, then try it again with Accessory HFL. If the

audio quality is still poor with Accessory HFL, then contact JCI. If the

audio quality is poor on your cell phone, then contact your phone provider/

carrier to verify that your phone has the latest firmware.

Check the signal strength icon on your phone. Avoid using the phone and

Accessory HFL in areas where the signal strength is poor and unable to

provide a good conversation in both directions.

Phone has adequate cell signal strength.

Phone is in the vehicle.

Place phone closer to Accessory HFL module, e.g., the center console

area.

Troubleshooting

I am told that I sound unclear.

Check

Possible Solutions

There is not an abnormal amount of noise inside

of the vehicle while using Accessory HFL.

Try eliminating any additional noise by rolling up the windows, turning the

heater/AC blower fan down, and reducing any loud noises or talking while

using Accessory HFL.Your Accessory HFL unit may also pick up road

noise.Try to avoid using Accessory HFL when traveling on extremely

rough roads.

If they hear a lot of distortion.

You may have a firmware issue.Verify the latest phone firmware is being

used. Contact your phone provider/carrier.

The voice recognition is not working.

Check

Possible Solutions

There is not an abnormal amount of noise inside

of the vehicle while using Accessory HFL.

Try eliminating any additional noise by rolling up the windows, turning the

heater/AC blower fan down, and making any loud noises or talking while

using Accessory HFL.Your Accessory HFL unit may also pick up road

noise. Avoid using Accessory HFL when traveling on extremely rough

roads.

You are not speaking at the same time or before

the Accessory HFL beep is heard.

You are not speaking too slowly, too loudly or

too softly.

Wait until the beep is heard before speaking.

Try speaking in a normal voice when giving a command or response to

Accessory HFL.

Troubleshooting

Accessory HFL will not call the name given to it.

Check

Possible Solutions

The name you called is stored in the

Accessory HFL phone book.

Store the name in Accessory HFL phonebook, not in the phone.

I can't select a phone.

Check

Phone is paired to Accessory HFL.

Phone is turned ON.

Possible Solutions

Pair the phone and LINK to Accessory HFL.

Turn the phone ON.

Phone is LINKED to Accessory HFL.

Say“Set up”in main menu and then say“Select phone” in order to select

the desired paired phone to LINK.

Index

Confirmation Prompts .............................. 15

Contact-Sales ............................................ 5

Contact-Service & Warranty ...................... 5

Contact-Technical Support ........................ 5

Customer Contact Information ................... 5

Accessory HFL commands ..................... 10

Adding a Name ........................................ 19

Adding a New Location ............................ 20

Audio Quality ............................................ 29

Barge-in Button .......................................... 9

Beeps ..................................................... 8, 9

Blue LED Light ........................................... 9

Bluetooth .................................................... 5

Button Functions ........................................ 9

Call Feature .............................................. 18

Call Waiting .............................................. 24

Cancel ........................................................ 8

Cell Phone Battery ..................................... 7

Cell Phone Firmware ......................... 29, 30

Cell Phone Requirements .......................... 5

Cell Phone Signal ...................................... 7

Clear Paired Phones ................................ 13

Deactivation Button .................................... 9

Definition-Accessory HFL .......................... 5

Delete a Phone ........................................ 13

Deleting a Location .................................. 21

Deleting a Name ...................................... 21

Dial Feature .............................................. 18

Digit String ............................................... 24

Dual-Tone Multi-Frequency (DTMF) Tones ... 9

Editing a Number ..................................... 20

Emergency ............................................... 24

Erase All Names ...................................... 22

Function Overview ....................................10

Index

Getting Started .......................................... 7

Pairing Mode ............................................ 11

Phone Button ............................................. 9

Phone Compatibility ................................... 5

Phone Not Available ................................ 13

Phone Operational Manual ...................... 11

Phone Pairing .......................................... 11

Phone Priority .................................... 12, 17

Phonebook ............................................... 19

PIN ..................................................... 11, 26

Product Functions .............................. 24, 25

Programming Safety .................................. 6

Prompts .......................................... 8, 15, 16

Hands-Free Profile ..................................... 5

Help ...................................................... 8, 23

Hold Call ................................................... 24

Incoming Calls ......................................... 24

Installation Requirements .......................... 5

Johnson Controls ....................................... 5

List Paired Phones ................................... 14

Listing Names .......................................... 21

Redial feature ..................................... 18, 25

Microphone ................................................ 9

Mute ................................................... 25, 29

Index

Safety Precautions ..................................... 6

Web Site ..................................................... 5

Select a Phone .................................. 17, 31

Setup Command ...................................... 11

SIM Card .................................................. 26

Speaker ...................................................... 9

Table of Contents ....................................... 3

Three-Way Call ........................................ 25

Transfer a Call .......................................... 25

Troubleshooting .................................. 26, 31

UIB ............................................................. 9

UIB Buttons ................................................ 9

Unit Power Down ....................................... 8

User Interface Board .................................. 9

Vehicle Compatibility .................................. 5

Volume Buttons .......................................... 9

VR (Voice Recognition) .................. 9, 25, 30

08E00-E10-1000-81

Printed in Japan

AAM38695

Admiral AAWV 10CR1FAU User Manual
AllerAir 40 User Manual
Brother DCP 7025 User Manual
Burley HQ8445 User Manual
Carrier 52S User Manual
Fluke BP130 User Manual
Ford HM02 E 10712484 User Manual
Friedrich Air Conditioner WS08 User Manual
GE General Electric Air Conditioner AS_06 User Manual
GE Zoneline AZ38H12D User Manual