Havis Shields 1996 2008 Crown Victoria Swing Out Dash Monitor Mount S DMM XXX CV SO User Manual |
INSTALL INSTRUCTIONS S-DMM-XXX-CV-SO
1996-2008 CROWN VICTORIA
SWING-OUT DASH MONITOR MOUNT
**Does not work on 2008 Police Package Crown Vic with optional CD player**
TOOLS REQUIRED:
• Ratchet Wrenches
• Sockets - 7mm, 7/16”, 9/16”
• Open End Wrenches - 7/16”, 9/16”
• Phillips Screwdriver
• T-20 Torx Driver
• AM/FM (DIN) Removal Tool
HARDWARE:
QTY:
DESCRIPTION:
PART #:
1
2
1
4
1
1
1
3/8”-16 x 1 Hex Bolt
3/8” Flat Washer
GSM33028B
GSM31007B
GSM30018B
GSM30023
3/8” Nylock Nut
1/4-20 Hex Flange Serrated Nut
3/8” Self Adhesive Loom Clip
6” Wire Tie
GSM20032
GSM20034
Varies (monitor specific)
Monitor Adapter Hardware
LINE DRAWING:
This instruction
shows installation of a
Data-911 computer
Always!
• Read all instructions before installing any Havis-Shields Equipment Corp products.
• Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
• Use hardware provided with install kit
• For product support: visit the Install Instructions Section of our website at
or call 1-800-524-9900.
1
S-DMM-XXX-CV-SO_INST_3-08a
Attach #2 bracket to dash frame with 3/8”
hex bolt, washers, and nut.
Tighten 3/8 bolt.
(9/16 socket and wrench)
Slip #1 bracket over plastic AM/FM radio
support.
Reattach center dash trim and run computer
wires.
Run computer wiring through notch (top
passenger side) and place monitor mount into
dash cavity.
Attach monitor mount to #1 and #2 brackets
with 1/4” bolts provided.
3
S-DMM-XXX-CV-SO_INST_3-08a
Position assembly and tighten bolts.
Attach top & bottom dash clamps (#3 bracket)
with #8x1” phillips machine screws.
Dash mount installed. Check computer
wiring length and find AM/FM wiring.
Attach computer wiring and monitor adaptor
bracket.
Note: Some computers require wiring to be
connected prior to attaching adaptor bracket.
Determine desired position of monitor.
4
S-DMM-XXX-CV-SO_INST_3-08a
Attach monitor bracket to dash mount with
1/4” nuts.
Position and wire tire wiring.
Wiring complete.
Connect AM/FM radio harness and antenna
cable. Check radio operation. Snap radio into
mount bracket.
Dash monitor mount and console installation complete.
5
S-DMM-XXX-CV-SO_INST_3-08a
|
Airflow Technology Breeze Ultra 71 User Manual
Airlink101 APSUSB1 User Manual
Brookstone Mobile 2600 mAh Power Charger 802217 User Manual
Carrier 48TM004 014 User Manual
Exide S47 0079 User Manual
Friedrich HAZARDGARD SH20L30 B User Manual
GCC Printers 2018 User Manual
Harbor Freight Tools CENTRAL MACHINERY 95288 User Manual
Harbor Freight Tools Haul Master Cargo Retaining Bar Adjustable 43569 User Manual
Honeywell MS8120S User Manual