HP ENVY 100 e-All-in-One
D410 series
Chapter 1
4
HP ENVY 100 e-All-in-One D410 series Help
Chapter 2
Printer parts
Front view of the printer
1
Lid
Lid backing
2
3
4
5
Glass
Access door (closed)
On button. Touch once to turn on or turn off your printer. When the printer is off, a small
amount of power is still used. To completely remove power, turn off the printer, then unplug
the power cord.
6
7
Paper tray (closed)
Output tray extender. Comes out automatically when printing or copying, then stows
automatically.
8
9
Color graphics display (also referred to as the display)
USB flash drive slot
10 Memory card slots
11 Printer access door (open)
12 Paper path cover
13 Squeeze buttons for removing paper path cover
14 Paper-width guides
15 Paper tray (out)
16 Print cartridge carriage
17 Print cartridges (installed)
18 Port for connecting with a USB cable to a computer, instead of wireless connection. Some
features are available only with a wireless network connection.
6
Get to know the HP ENVY
19 Power connection. Use only the power cord supplied by HP.
Control panel features
The touch screen display shows menus, photos, and messages. You can touch and drag
your finger horizontally to scroll through photos and vertically through list menus.
1
2
Home: Returns to the Home screen, the screen that is displayed when you first turn on the
printer.
Get More: If Web Services are enabled, takes you to the Internet for downloading more
Apps.
3
4
Back:: Returns to the previous screen on the display.
Photo: Opens the Photo menu. From there, you can view and print photos, connect to
Snapfish, reprint a printed photo, or save photos to a USB flash drive or a memory card.
5
Copy: Opens the Copy menu where you can preview your copy, edit for size and darkness,
select black or color, and select the number of copies. You can also change settings to make
2-sided copies, or select size, quality, and paper type.
6
7
8
Scan: Opens the Scan menu, where you can select a destination for your scan.
Cancel: Stops the current operation.
Apps: Provide quick and easy access to pages to print from the Web, such as maps, coupons,
coloring pages, puzzles, and more.
9
Help: Shows information on the display to assist in the current operation.
10 Setup: Opens the Setup menu with a list of other menus from which you can change product
settings and perform maintenance functions. Setup menus include Network, Web, Tools,
and Preferences.
11 Ink Status: Opens the Ink Status dashboard, showing estimated ink levels by cartridge.
12 Apps Manager: Opens the Apps Manager where you can manage settings or remove Apps.
13 Wireless: Opens the Wireless Menu with options for setting up a wireless connection, testing
the connection, and turning wireless on and off. When the icon is colored, wireless is turned
on.
14 Web Services: Opens the Web Services menu with options for enabling or turning off Web
Services and ePrint, checking for product updates, and configuring other web settings. When
the icon is colored, Web Services are turned on.
Control panel features
7
Chapter 2
8
Get to know the HP ENVY
Chapter 3
10
How do I?
4 Print
Related topics
Print documents
Most print settings are automatically handled by the software application. You need to
change the settings manually only when you change print quality, print on specific types
of paper or transparency film, or use special features.
To print from a software application
1. Make sure you have paper loaded in the paper tray.
2. On the File menu in your software application, click Print.
3. Make sure the product is the selected printer.
4. If you need to change settings, click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
NOTE: When printing a photo, you must select options for the specific photo
paper and photo enhancement.
Print
11
Chapter 4
5. Select the appropriate options for your print job by using the features available in the
Advanced, Printing Shortcuts, Features, and Color tabs.
TIP: You can easily select the appropriate options for your print job by choosing
one of the predefined print tasks on the Printing Shortcuts tab. Click a type of
print task in the Printing Shortcuts list. The default settings for that type of print
task are set and summarized on the Printing Shortcuts tab. If necessary, you
can adjust the settings here and save your custom settings as a new printing
shortcut. To save a custom printing shortcut, select the shortcut and click Save
As. To delete a shortcut, select the shortcut and click Delete.
6. Click OK to close the Properties dialog box.
7. Click Print or OK to begin printing.
Related topics
Print photos
•
•
Print photos from a memory card
Print photos from a memory card
1. Load photo paper into the paper tray.
2. Insert a memory card into the slot.
3. On the Home screen, touch Photo to display the Photo Menu.
4. On the Photo Menu, touch View & Print to display the Photo Menu.
5. Touch Select All if you wish to print all the photos on the memory card. Or, touch and
drag your finger to scroll through the photos. Tap those you wish to select.
6. Touch the up and down arrow to display the number of photos to print.
7. Touch Edit to select options to edit the selected photos. You can rotate a photo, crop,
turn Photo Fix on and off, adjust brightness, or choose a color effect.
12
Print
8. Touch Print to preview the selected photos for printing. If you wish to adjust layout,
paper type, red eye removal, auto align, or date stamp, touch Settings and touch
your selections. You can also save any new settings as defaults. Tap on the menu to
close it without making any selections.
9. Touch Print to begin printing. The control panel will rise and the output tray extender
will automatically come out. After you remove your prints, the extender will
automatically stow out of view.
Print photos saved on your computer
To print a photo on photo paper
1. Make sure you have photo paper loaded in the paper tray.
2. Place the photo paper print side down in the center of the paper tray.
3. Slide the paper-width guides inward until they stop at the edge of the paper.
4. On the File menu in your software application, click Print.
5. Make sure the product is the selected printer.
6. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
7. Click the Features tab.
8. In the Basic Options area, from the Paper Type drop-down list, select More. Then,
select the appropriate photo paper type.
9. In the Resizing Options area, from the Size drop-down list, select More. Then, select
the appropriate paper size.
If the paper size and paper type are not compatible, the printer software displays an
alert and allows you to select a different type or size.
10. (Optional) Select the Borderless printing check box if it is not already checked.
If the borderless paper size and paper type are not compatible, the product software
displays an alert and allows you to select a different type or size.
11. In the Basic Options area, select a high print quality, such as Best, from the Print
Quality drop-down list.
NOTE: To achieve the highest dpi resolution, you can use the Maximum dpi
setting with supported types of photo paper. If Maximum dpi is not listed in the
Print quality drop-down list, you can enable it from the Advanced tab.
Print photos
13
Chapter 4
12. In the HP Real Life Technologies area, click the Photo fix drop-down list and select
from the following options:
•
•
Off: applies no HP Real Life Technologies to the image.
Basic: enhances low-resolution images; moderately adjusts image sharpness.
13. Click OK to return to the Properties dialog box.
14. Click OK, and then click Print or OK in the Print dialog box.
NOTE: Do not leave unused photo paper in the paper tray. The paper might start to
curl, which could reduce the quality of your printout. For best results, do not allow
printed photos to stack up in the paper tray.
Print on labels and envelopes
With the HP ENVY, you can print on a single envelope, a group of envelopes, or label
sheets designed for inkjet printers.
To print a group of addresses on labels or envelopes
1. Print a test page on plain paper first.
2. Place the test page on top of the label sheet or envelope, and hold both up to the
light. Check the spacing for each block of text. Make adjustments as needed.
3. Load the labels or envelopes into the paper tray.
CAUTION: Do not use envelopes with clasps or windows. They can get stuck in
the rollers and cause paper jams.
4. Slide paper-width guides inward against the stack of labels or envelopes until the
guides stop.
5. If you are printing on envelopes, do the following:
a. Display the print settings, and click the Features tab.
b. In the Resizing Options area, click the appropriate envelope size in the Size list.
6. Click OK, and then click Print or OK in the Print dialog box.
Load media
Do one of the following
•
Load A4 or 8 1/2 x 11 inch paper
Pull out paper tray.
Slide paper-width guides outward. Remove any other media previously loaded.
14
Print
Insert stack of paper into center of paper tray with short edge forward and print side
down. Push stack forward inside tray until it stops.
Slide paper-width guides inward until they stop at edge of paper.
Close paper tray.
•
Load 10 x 15 cm (4 x 6 inch) paper
Pull out paper tray.
Slide paper-width guides outward. Remove any other media previously loaded.
Insert stack of paper into center of paper tray with short edge forward and print side
down. Push stack forward inside tray until it stops.
Slide paper-width guides inward until they stop at edge of paper.
Close paper tray.
•
Load envelopes
Pull out paper tray.
Slide paper-width guides outward. Remove any other media previously loaded.
Insert stack of envelopes into center of paper tray with short edge forward and print
side down. Push stack forward inside tray until it stops.
Slide paper-width guides inward until they stop at edge of paper.
Close paper tray.
Related topics
Load media
15
Chapter 4
Print from anywhere
HP’s free ePrint service provides an easy way to print from email, anywhere and anytime.
Just forward an email to your printer's email address from your computer or mobile device,
and both the email message and recognized attachments will print.
•
•
•
Your printer needs to have a wireless network connection to the Internet. You won't
be able to use ePrint via a USB connection to a computer.
Attachments might print differently from they way they appear in the software program
that created them, depending on the original fonts and layout options used.
Free Product Updates are provided with ePrint. Some updates may be required to
enable certain functionality.
Related topics
Your printer is protected
To help prevent unauthorized email, HP assigns a random email address to your printer,
never publicizes this address, and by default does not respond to any sender. ePrint also
provides industry-standard spam filtering and transforms email and attachments to a
print-only format to reduce the trheat of a a virus or other harmful content. However, the
ePrint service does not filter emails based on content, so it cannot prevent objectionable
or copyrighted material from being printed.
Go to the HP ePrintCenter website for more information and specific terms and
16
Print
How to get started with ePrint
To use ePrint, you first need to have your printer connected wirelessly to a network and
Web Services enabled.
To get started with ePrint
1. Turn on wireless connection
a. Touch the Wireless icon to display the Wireless status dashboard. If a wireless
connection has already been set up, details like SSID and IP will be shown.
b. If the wireless network connection has not already been made, touch Settings,
then run the Wireless Setup Wizard.
If wireless network connection details like SSID and IP are displayed but the
connection is off, touch On to turn on the Wireless Connection.
c. Touch On to turn on the Wireless Connection.
2. Enable Web Services
a. Touch the ePrint icon to display the Web Services status dashboard.
b. If the Web Services is not already enabled, touch On to turn on Web Services.
If prompted to connect to the Internet, touch Yes to continue to enable Web
Services.
3. On the Web Services dashboard, touch the Web Menu, and then touch Turn ePrint
On.
▲ On the Web Services dashboard, touch On next to ePrint Service to turn on
ePrint.
Use the HP ePrintCenter website
Use HP’s free HP ePrintCenter website to set up increased security for ePrint and specify
the email addresses that are allowed to send email to your printer. You can also get
Product Updates and more Print Apps, plus other free services.
Go to the HP ePrintCenter website for more information and specific terms and
Print Apps
Print pages from the web, without using a computer, by setting up Apps, a free service
from HP. You can print coloring pages, calendars, puzzles, recipes, maps, and more,
depending on the apps available in your courntry/region.
Touch the Get More app on the Home screen to connect to the Internet and add more.
You need to have enabled Web Services in order to use apps.
Once enabled, use the Apps Manager to work with your My Favorites list, remove apps,
and manage settings.
Go to the HP ePrintCenter website for more information and specific terms and
Print Apps
17
Chapter 4
Manage Apps
1. Remove Apps.
▲ Touch the Apps Manager icon in the top-center of the Home screen to open the
Apps Manager menu.
2. Manage Apps Settings.
▲ Touch Postal Code and follow the prompts to set the postal code to use with
your Apps.
▲ Touch Time Zone and follow the prompts to set the time zone to use with your
Apps.
Tips for print success
Use the following tips to print successfully.
•
•
•
•
•
•
•
•
Use genuine HP cartridges. Genuine HP cartridges are designed for and tested with
HP printers to help you produce great results, time after time.
Make sure the cartridges have sufficient ink. To view the estimated ink levels, touch
the Ink Supplies icon on the Home screen.
Load a stack of paper, not just one page. Use clean and flat paper of the same size.
Make sure only one type of paper is loaded at a time.
Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure
the paper-width guide does not bend the paper in the input tray.
Set the print quality and paper size settings according to the type and size of paper
loaded in the input tray.
Learn how to share your photos online and order prints. Click here to go online for
Learn about Apps Manager for printing recipes, coupons, and other content from the
web, simply and easily. Click here to go online for more information.
Learn how to print from anywhere by sending an email and attachments to your
18
Print
Chapter 5
Load original print side down on right front corner of glass.
❑
Close lid.
❑
c. Specify number of copies and settings
Touch Copy on Home screen.
❑
The Copy preview appears.
Touch the screen to set the number of copies.
❑
d. Start copy.
Touch B&W or Color.
❑
20
Copy and scan
2-sided copy
a. Load paper.
Load full-size paper in the main input tray.
❑
b. Load original.
Lift lid on product.
❑
❑
❑
Load original print side down on right front corner of glass.
Close lid.
Copy text or mixed documents
21
Chapter 5
c. Specify 2-sided option.
Touch Copy on Home screen.
❑
The Copy preview appears.
Touch Settings.
❑
The Copy Settings menu appears.
Touch 2-Sided.
❑
❑
❑
Touch the 2-sided radio button to turn it on.
Touch Settings to close the menu.
d. Specify number of copies.
Use the touch screen to set the number of copies.
❑
e. Start copy.
Touch B&W or Color.
❑
f. Copy the second original.
Load second page on the glass and touch OK.
❑
Scan to a computer, USB drive, or memory card
To scan to a computer, USB drive, or memory card
1. Load original.
a. Lift lid on product.
b. Load original print side down on right front corner of glass.
22
Copy and scan
c. Close lid.
2. Start scan.
a. On the Home screen, touch Scan.
b. Select the destination by touching either Computer, USB Flash Drive, or
Memory Card.
If you are scanning to a computer and the printer is network-connected, a list of
available computers appears. Select the computer on which you want the scan
saved.
For scanning to a USB Flash Drive, insert a USB Flash Drive in the slot.
For scanning to a Memory Card, insert a Memory Card in the slot.
Tips for copy and scan success
Use the following tips to copy and scan successfully:
•
Keep the glass and the back of the lid clean. The scanner interprets anything it detects
on the glass as part of the image.
•
•
Load your original, print side down, on the right front corner of the glass.
To make a large copy of a small original, scan the original into the computer, resize
the image in the scanning software, and then print a copy of the enlarged image.
•
•
If the document to be scanned has a complex layout, select framed text as the scan
document setting in the software. With this setting, the text layout and formatting are
retained.
If the scanned image is incorrectly cropped, turn off the autocropping feature in the
software and crop the scanned image manually.
Tips for copy and scan success
23
Chapter 5
24
Copy and scan
6 Work with cartridges
•
•
•
•
•
•
•
•
Check the estimated ink levels
Touch the Ink Status icon at the top of the Home screen to display the estimated ink
levels.
NOTE: If you have installed a refilled or remanufactured cartridge, or a cartridge that
has been used in another printer, the ink level indicator might be inaccurate or
unavailable.
NOTE: Ink level warnings and indicators provide estimates for planning purposes
only. When you receive a low-ink warning message, consider having a replacement
cartridge available to avoid possible printing delays. You do not have to replace the
cartridges until the print quality is unacceptable.
NOTE: Ink from the cartridges is used in the printing process in a number of different
ways, including in the initialization process, which prepares the product and cartridges
for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing
smoothly. In addition, some residual ink is left in the cartridge after it is used. For more
Related topics
Work with cartridges
25
Chapter 6
Replace the cartridges
To replace the cartridges
1. Check that power is on.
2. Remove cartridge.
a. Open access door.
Wait for print carriage to move to center of product.
b. Lift up lid on print cartridge, then remove it from slot.
3. Insert new cartridge.
a. Remove cartridge from packaging.
26
Work with cartridges
b. Place new cartridge in slot at an angle under the opened lid.
c. Squeeze the lid closed as the cartridge slides into place.
d. Close access door.
Related topics
Order ink supplies
To find out the correct number for replacement cartridges, open the printer access door
and check the label.
Cartridge information and links to online shopping appear on ink alert messages. In
addition, you can find cartridge information and order online by visiting www.hp.com/buy/
Order ink supplies
27
Chapter 6
NOTE: Ordering cartridges online is not supported in all countries/regions. If it is not
supported in your country/region, contact a local HP reseller for information about
purchasing cartridges.
Clean cartridges
If print quality is unacceptable, and the problem is not low ink levels or non-HP ink, try
cleaning the cartridges.
To clean the cartridges
1. From the Home screen, touch Settings to display the Setup Menu. In the Setup Menu,
touch Tools.
2. In the Tools Menu, touch Clean Cartridges.
3. If the print quality looks acceptable, touch Done. Otherwise, touch Second-level
Clean to do a more thorough cleaning.
Related topics
Clean for back of page ink smearing
If you see that the back of printouts show smeared ink, try cleaning areas of the printer
where ink can build up. This process takes several minutes to complete. Full size paper
needs to be loaded and will be moved automatically during the cleaning. A blank page is
ejected when the process is complete.
To clean for back of page smearing
1. From the Home screen, touch Settings to display the Setup Menu. In the Setup Menu,
touch Tools.
2. In the Tools Menu, touch Back of Page Smear Cleaning.
3. Load full-size plain paper in the paper tray. Touch OK.
Related topics
Clean paper feed
If false 'Out of paper' messages appears, or you have other paper feeding problems, try
cleaning the paper feed. The process takes several minutes to complete. You need to
empty the paper tray before starting the cleaning.
28
Work with cartridges
To clean the paper feed
1. From the Home screen, touch Settings to display the Setup Menu. In the Setup Menu,
touch Tools.
2. In the Tools Menu, touch Paper Feed Cleaning.
3. Remove all the paper from the paper tray. Touch OK.
Related topics
Cartridge warranty information
The HP cartridge warranty is applicable when the product is used in its designated HP
printing device. This warranty does not cover HP ink products that have been refilled,
remanufactured, refurbished, misused, or tampered with.
During the warranty period the product is covered as long as the HP ink is not depleted
and the end of warranty date has not been reached. The end of warranty date, in YYYY/
MM format, may be found on the product as indicated:
For a copy of the HP Limited Warranty Statement, see the printed documentation that
came with the product.
Tips for working with ink
Use the following tips to work with ink cartridges:
•
•
To check the estimated ink levels, touch the Ink Status icon on the Home screen.
Use the correct print cartridges for your printer. For a list of compatible cartridges,
open the access door and check the label.
•
Insert the ink cartridges into the correct slots. Match the color and icon of each
cartridge to the color and icon for each slot. Make sure the cartridge lid is closed on
each cartridge.
•
•
Use genuine HP ink cartridges. Genuine HP ink cartridges are designed for and tested
with HP printers to help you produce great results, time after time.
Consider getting replacement ink cartridges when you receive an ink alert message.
This avoids possible printing delays. You do not need to replace the ink cartridges
until print quality becomes unacceptable.
Tips for working with ink
29
Chapter 6
30
Work with cartridges
7 Connectivity
•
•
Add the HP ENVY to a network
•
•
•
•
WiFi Protected Setup (WPS)
To connect the HP ENVY to a wireless network using WiFi Protected Setup (WPS), you
will need the following:
A wireless 802.11 network that includes a WPS-enabled wireless router or access
point.
❑
A desktop computer or laptop with either wireless networking support, or a network
interface card (NIC). The computer must be connected to the wireless network that
you intend to install the HP ENVY on.
❑
To connect the HP ENVY using WiFi Protected Setup (WPS)
▲ Do one of the following:
Use Push Button (PBC) method
a. Select setup method.
Touch Setup.
❑
❑
❑
❑
Touch Network.
Touch WiFi Protected Setup.
Touch Push Button.
b. Set up wireless connection.
Touch Start.
❑
❑
Press and hold the button on WPS-enabled router or other networking device
to activate WPS.
NOTE: The product begins a timer for approximately two minutes in
which the corresponding button on the networking device needs to be
pressed.
Touch OK.
❑
c. Install software.
Connectivity
31
Chapter 7
Use PIN method
a. Select setup method.
Touch Setup.
❑
❑
❑
❑
Touch Network.
Touch WiFi Protected Setup.
Touch PIN.
b. Set up wireless connection.
Touch Start.
❑
The device displays a PIN.
Enter PIN on WPS-enabled router or other networking device.
❑
NOTE: The product begins a timer for approximately two minutes in
which the PIN needs to be entered on the networking device.
Touch OK.
❑
c. Install software.
Wireless with a router (infrastructure network)
To connect the HP ENVY to an integrated wireless WLAN 802.11 network, you will need
the following:
A wireless 802.11 network that includes a wireless router or access point.
❑
❑
A desktop computer or laptop with either wireless networking support, or a network
interface card (NIC). The computer must be connected to the wireless network that
you intend to install the HP ENVY on.
Broadband Internet access (recommended) such as cable or DSL.
If you connect the HP ENVY on a wireless network that has Internet access, HP
recommends that you use a wireless router (access point or base station) that uses
Dynamic Host Configuration Protocol (DHCP).
❑
Network name (SSID).
❑
❑
WEP key or WPA Passphrase (if needed).
To connect the printer with the Wireless Setup Wizard
1. Write down your network name (SSID) and WEP key or WPA passphrase.
2. Start Wireless Setup Wizard.
▲ Touch Wireless Setup Wizard.
3. Connect to wireless network.
▲ Select your network from the list of detected networks.
4. Follow prompts.
5. Install software.
Related topics
32
Connectivity
Wireless without a router (ad hoc connection)
Use this section if you want to connect the HP ENVY to a wireless-capable computer
without using a wireless router or access point.
There are two methods you may use to connect the HP ENVY to your computer using
an ad hoc wireless network connection. Once connected, you can install the HP ENVY
software.
▲ Turn on the wireless radio for the HP ENVY and the wireless radio on your computer.
On your computer, connect to the network name (SSID) hpsetup, which is the default
ad hoc network created by the HP ENVY.
If the HP ENVY was previously configured for a different network, use Restore
Network Defaults to restore the default ad hoc profile of hpsetup.
OR
▲ Use an ad hoc network profile on your computer to connect to the product. If your
computer is not currently configured with an ad hoc network profile, consult the Help
file for your computer Operating System for the proper method to create an ad hoc
profile on your computer. Once the ad hoc network profile has been created, run the
Wireless Setup Wizard from the Network menu on the HP ENVY and select the ad
hoc network profile you created on your computer.
NOTE: An ad hoc connection can be used if you do not have a wireless router or
access point but do have a wireless radio on your computer. However, an ad hoc
connection may result in a lower level of network security and possibly reduced
performance when compared to an infrastructure network connection using a wireless
router or access point.
To connect the HP ENVY to a Windows computer with an ad hoc connection, the
computer must have a wireless network adapter and an ad hoc profile. Create a network
profile for a Windows Vista or Windows XP computer using the directions below.
NOTE: If you have an operating system other than Windows Vista or Windows XP,
HP recommends that you use the configuration program that came with your wireless
LAN card. To find the configuration program for your wireless LAN card, access your
computer's list of programs.
To create a network profile
NOTE: The product comes configured with a network profile with hpsetup as the
network name (SSID). However, for security and privacy HP recommends you create
a new network profile on your computer as described here.
Add the HP ENVY to a network
33
Chapter 7
1. In the Control Panel, double-click Network Connections.
2. On the Network Connections window, right-click the Wireless Network
Connection. If you see Enable on the pop-up menu, select it. Otherwise, if you see
Disable on the menu, the wireless connection is already enabled.
3. Right-click the Wireless Network Connection icon, and then click Properties.
4. Click the Wireless Networks tab.
5. Select the Use Windows to configure my wireless network settings check box.
6. Click Add, and then do the following:
a. In Network name (SSID) box, type in a unique network name of your choice.
NOTE: The network name is case sensitive, so it is important to remember
any uppercase (capital) and lowercase (small) letters.
b. If there is a Network Authentication list, select Open. Otherwise, go to the next
step.
c. In the Data encryption list, select WEP.
d. Make sure that the check box is not selected next to The key is provided for me
automatically. If it is selected, click the check box to clear it.
e. In the Network key box, type a WEP key that has exactly 5 or exactly 13
alphanumeric (ASCII) characters. For example, if you enter 5 characters, you
might enter ABCDE or 12345. Or, if you enter 13 characters, you might enter
ABCDEF1234567. (12345 and ABCDE are examples only. Select a combination
of your choosing.)
Alternatively, you can use HEX (hexadecimal) characters for the WEP key. A HEX
WEP key must be 10 characters for 40 bit encryption, or 26 characters for 128 bit
encryption.
f. In the Confirm network key box, type the same WEP key you typed in the
previous step.
NOTE: You must remember the exact uppercase (capital) and lowercase
(small) letters. If you enter your WEP key incorrectly on the product, the
wireless connection will fail.
g. Write down the WEP key exactly as you typed it, including uppercase and
lowercase letters.
h. Select the check box for This is a computer-to-computer (ad hoc) network;
wireless access points are not used.
i. Click OK to close the Wireless network properties window, and then click OK
again.
j. Click OK again to close the Wireless Network Properties Connection window.
To connect to a wireless ad hoc network
1. Touch Setup.
34
Connectivity
2. Touch Network.
NOTE: If the menu option you want is not visible on the screen, touch the up or
down arrow to scroll through all the menu options.
3. Touch Wireless Setup Wizard.
This runs the Wireless Setup Wizard. The setup wizard searches for available
networks, and then displays a list of detected network names (SSIDs). The
infrastructure networks appear first in the list, followed by available ad hoc networks.
The networks with the strongest signal appear first, the weakest appear last.
4. On the display, look for the network name you created on your computer (for example,
Mynetwork).
5. Touch the network name.
If you found your network name and selected it, go on to step 7.
If you do not see your network name in the list
a. Touch Enter a New Network Name (SSID).
The visual keyboard appears.
b. Enter the SSID. Touch the appropriate letters or numbers on the visual keyboard.
NOTE: You must enter the exact uppercase (capital) and lowercase (small)
letters. Otherwise, the wireless connection will fail.
c. When you have finished entering the new SSID, touch Done on the visual
keyboard, and then touch OK.
TIP: If the product is unable to discover the network based on the network
name you entered, you will see the following prompts. You may want to move
the product closer to the computer and try running the Wireless Setup Wizard
again to automatically discover the network.
d. Touch Ad Hoc.
e. Touch Yes, my network uses WEP encryption. The visual keyboard displays.
If you do not want to use WEP encryption, touch No, my network does not use
encryption. Go to step 7.
6. If prompted, enter your WEP key as follows. Otherwise go to step 8.
a. Touch the appropriate letters or numbers on the visual keyboard.
NOTE: You must enter the exact uppercase (capital) and lowercase (small)
letters. Otherwise, the wireless connection will fail.
b. When you are finished entering the WEP key, touch Done on the visual keyboard.
Add the HP ENVY to a network
35
Chapter 7
7. Touch OK again to confirm.
The product will attempt to connect to the SSID. If a message says you entered an
invalid WEP key, check the key you wrote down for your new network, follow the
prompts to correct the WEP key, and then try again.
8. When the product connects successfully to the network, go to your computer to install
the software.
NOTE: You can print the Wireless Network Test report at the end of a successful
Wireless Setup Wizard connection which can help identify any potential future
issues with the network setup.
Install the software for a network connection
Use this section to install the HP ENVY software on a computer connected to a network.
Before you install the software, make sure you have connected the HP ENVY to a
network. If the HP ENVY has not been connected to a network, follow the onscreen
instructions during the software installation to connect the product to the network.
NOTE: Installation time can vary depending on your operating system, the amount
of available space, and the processor speed of your computer.
To install the Windows HP ENVY Software on a networked computer
1. Quit all applications running on your computer.
2. Insert the installation CD that came with the product into the CD-ROM drive on your
computer and follow the onscreen instructions.
NOTE: If the HP ENVY is not connected to a network, run the Wireless Setup
Wizard from the Network menu on the HP ENVY.
3. If a dialog box about firewalls appears, follow the instructions. If you see firewall pop-
up messages, you must always accept or allow the pop-up messages.
4. On the Connection Type screen, select an appropriate option, and then click Next.
The Searching screen appears as the Setup program searches for the product on
the network.
5. On the Printer Found screen, verify that the printer description is correct.
If more than one printer is found on the network, the Printers Found screen appears.
Select the product you want to connect.
6. Follow the prompts to install the software.
When you have finished installing the software, the product is ready for use.
7. To test your network connection, go to your computer and print a self-test report to
the product.
36
Connectivity
Tips for setting up and using a networked printer
Use the following tips to set up and use a networked printer:
•
When setting up the wireless networked printer, make sure your wireless router or
access point is powered on. The printer searches for wireless routers, then lists the
detected network names on the display.
•
To verify the wireless connection, check the wireless icon at the top of the Home
screen. If the icon is colored, the wireless connection is on. Touch the icon to display
the Wireless status dashboard. Touch Settings to display the Network Menu, with
options for setting up a wireless connection or turning on the wireless connection, if
already set up.
•
If your computer is connected to a Virtual Private Network (VPN), you need to
disconnect from the VPN before you can access any other device on your network.,
including the printer.
•
•
•
•
Learn how to find your network security settings. Click here to go online for more
Learn about the Network Diagnostic Utility and other troubleshooting tips. Click here
Learn how to change from a USB to wireless connection. Click here to go online for
Learn how to work with your firewall and anti-virus programs during printer setup.
Tips for setting up and using a networked printer
37
Chapter 7
38
Connectivity
8 Solve a problem
This section contains the following topics:
•
•
•
•
•
•
Get more help
You can find more information and help about your HP ENVY by entering a keyword in
the Search field in the top left of the help viewer. Titles of related topics -- for both local
and online topics -- will be listed.
Clear a paper jam
Clear a paper jam.
To clear a paper jam
1. Press the cancel button on the control panel to try to clear the jam automatically. If
this does not work, the paper jam will need to be cleared manually.
2. Locate the paper jam by lifting open the printer access door.
Clear jam from input/output area
If the paper jam is located near the front of the printer in the input/output area, gently
pull the paper out. Close access door.
Solve a problem
39
Chapter 8
Clear jam from paper path
Squeeze together the two buttons on the paper path cover and remove the cover.
Gently pull out the jammed paper. Replace the paper path cover. Close the access
door.
Clear jam from duplexer path
Squeeze together the two buttons on the paper path cover and remove the cover.
Gently pull out the jammed paper. Replace the paper path cover. Close the access
door.
3. Press the OK button on the control panel to continue the current job.
Unable to print
Make sure that the printer is turned on and that there is paper in the tray. If you are still
unable to print, try the following in order:
1. Check for error messages and resolve.
2. Turn printer off, then back on again.
3. Verify that the product is not paused or offline.
To verify that the product is not paused or offline
NOTE: HP provides a Printer Diagnostic Utility that can automatically fix this
issue.
Click here to go online for more information. Otherwise, follow the steps
below.
40
Solve a problem
a. Depending upon your operating system, do one of the following:
•
•
Windows 7: From the Windows Start menu, click Devices and Printers.
Windows Vista: From the Windows Start menu, click Control Panel, and
then click Printers.
•
Windows XP: From the Windows Start menu, click Control Panel, and then
click Printers and Faxes.
b. Double-click the icon for your product to open the print queue.
c. On the Printer menu, make sure there are no check marks next to Pause
Printing or Use Printer Offline.
d. If you made any changes, try to print again.
4. Verify that the product is set as the default printer.
To verify that the product is set as the default printer
NOTE: HP provides a Printer Diagnostic Utility that can automatically fix this
issue.
Click here to go online for more information. Otherwise, follow the steps
below.
a. Depending upon your operating system, do one of the following:
•
•
Windows 7: From the Windows Start menu, click Devices and Printers.
Windows Vista: From the Windows Start menu, click Control Panel, and
then click Printers.
•
Windows XP: From the Windows Start menu, click Control Panel, and then
click Printers and Faxes.
b. Make sure the correct product is set as the default printer.
The default printer has a check mark in a black or green circle next to it.
c. If the wrong product is set as the default printer, right-click the correct product and
select Set as Default Printer.
d. Try using your product again.
5. Restart the print spooler.
To restart the print spooler
NOTE: HP provides a Printer Diagnostic Utility that can automatically fix this
issue.
Click here to go online for more information. Otherwise, follow the steps
below.
Unable to print
41
Chapter 8
a. Depending upon your operating system, do one of the following:
Windows 7
•
From the Windows Start menu, click Control Panel, System and Security,
and then Administrative Tools.
•
•
•
Double-click Services.
Right-click the Print Spooler, and then click Properties.
On the General tab, next to Startup type, make sure that Automatic is
selected.
•
If the service is not already running, under Service status, click Start, and
then click OK.
Windows Vista
•
From the Windows Start menu, click Control Panel, System and
Maintenance, Administrative Tools.
•
•
•
Double-click Services.
Right-click the Print Spooler service, and then click Properties.
On the General tab, next to Startup type, make sure that Automatic is
selected.
•
If the service is not already running, under Service status, click Start, and
then click OK.
Windows XP
•
•
•
•
From the Windows Start menu, right click My Computer.
Click Manage, and then click Services and Applications.
Double-click Services, and then select Print Spooler.
Right-click Print Spooler, and click Restart to restart the service.
b. Make sure the correct product is set as the default printer.
The default printer has a check mark in a black or green circle next to it.
c. If the wrong product is set as the default printer, right-click the correct product and
select Set as Default Printer.
d. Try using your product again.
6. Restart the computer.
7. Clear the print queue.
To clear the print queue
NOTE: HP provides a Printer Diagnostic Utility that can automatically fix this
issue.
Click here to go online for more information. Otherwise, follow the steps
below.
42
Solve a problem
a. Depending upon your operating system, do one of the following:
•
•
Windows 7: From the Windows Start menu, click Devices and Printers.
Windows Vista: From the Windows Start menu, click Control Panel, and
then click Printers.
•
Windows XP: From the Windows Start menu, click Control Panel, and then
click Printers and Faxes.
b. Double-click the icon for your product to open the print queue.
c. On the Printer menu, click Cancel all documents or Purge Print Document,
and then click Yes to confirm.
d. If there are still documents in the queue, restart the computer and try printing
again after the computer has restarted.
e. Check the print queue again to make sure it is clear, and then try to print again.
If the above solutions do not resolve the problem, click here for more online
Clear the print carriage
Remove any objects, such as paper, that are blocking the print carriage.
NOTE: Do not use any tools or other devices to remove jammed paper. Always use
caution when removing jammed paper from inside the printer.
Resolve copy and scan issues
HP support
•
•
•
Register your printer
By taking just a few quick minutes to register, you can enjoy quicker service, more efficient
support, and product support alerts. If you did not register your printer while installing the
HP support by phone
Phone support options and availability vary by product, country/region, and language.
HP support
43
Chapter 8
This section contains the following topics:
•
•
•
Phone support period
One year of phone support is available in North America, Asia Pacific, and Latin America
(including Mexico). To determine the duration of phone support in Europe, the Middle
Placing a call
Call HP support while you are in front of the computer and the product. Be prepared to
provide the following information:
•
•
•
•
Product name (HP ENVY 100 e-All-in-One D410 series)
Serial number (located on the back or bottom of the product)
Messages that appear when the situation occurs
Answers to these questions:
◦
◦
◦
Has this situation happened before?
Can you re-create it?
Did you add any new hardware or software to your computer at about the time
that this situation began?
◦
Did anything else occur prior to this situation (such as a thunderstorm, product
was moved, etc.)?
After the phone support period
After the phone support period, help is available from HP at an additional cost. Help may
HP dealer or call the support phone number for your country/region to learn more about
support options.
Additional warranty options
Extended service plans are available for the HP ENVY at additional costs. Go to
www.hp.com/support , select your country/region and language, then explore the
services and warranty area for information about the extended service plans.
44
Solve a problem
9 Technical information
The technical specifications and international regulatory information for the HP ENVY are provided
in this section.
For additional specifications, see the printed documentation that came with the HP ENVY.
This section contains the following topics:
•
•
•
•
•
•
Notice
Hewlett-Packard Company notices
The information contained in this document is subject to change without notice.
All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission
of Hewlett-Packard, except as allowed under copyright laws. The only warranties for HP products and services are set forth
in the express warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
© 2009 Hewlett-Packard Development Company, L.P.
Microsoft, Windows, Windows XP, and Windows Vista are U.S. registered trademarks of Microsoft Corporation.
Windows 7 is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other
countries.
Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and
other countries.
Cartridge chip information
The HP cartridges used with this product contain a memory chip that assists in the operation of the
product. In addition, this memory chip collects a limited set of information about the usage of the
product, which might include the following: the date when the cartridge was first installed, the date
when the cartridge was last used, the number of pages printed using the cartridge, the page
coverage, the printing modes used, any printing errors that might have occurred, and the product
model. This information helps HP design future products to meet our customers printing needs.
The data collected from the cartridge memory chip does not contain information that can be used to
identify a customer or user of the cartridge or their product.
HP collects a sampling of the memory chips from cartridges returned to HP's free return and recycling
memory chips from this sampling are read and studied in order to improve future HP products. HP
partners who assist in recycling this cartridge might have access to this data, as well.
Any third party possessing the cartridge might have access to the anonymous information on the
memory chip. If you prefer to not allow access to this information, you can render the chip inoperable.
However, after you render the memory chip inoperable, the cartridge cannot be used in an HP
product.
If you are concerned about providing this anonymous information, you can make this information
inaccessible by turning off the memory chip's ability to collect the product's usage information.
Technical information
45
Chapter 9
To disable the usage information function
1. Touch Setup.
2. Touch Preferences.
3. Touch Cartridge Chip Info, and then touch OK.
NOTE: To re-enable the usage information function, restore the factory defaults.
NOTE: You can continue to use the cartridge in the HP product if you turn off the memory chip's
ability to collect the product's usage information.
Specifications
Technical specifications for the HP ENVY are provided in this section. For complete product
System requirements
Software and system requirements are located in the Readme file.
For information about future operating system releases and support, visit the HP online support Web
Environmental specifications
•
Allowable operating temperature range: Main printer: 5 to 40 degrees C (41 to 104 degrees F)
Removable display: -10 to 40 degrees C (14 to 104 degrees F)
•
•
•
•
Allowable operating temperature range: 5 ºC to 40 ºC (41 ºF to 104 ºF)
Humidity: 15% to 80% RH non-condensing; 28 ºC maximum dewpoint
Non-operating (Storage) temperature range: -20 to 60 degrees C (-4 to 140 degrees F)
In the presence of high electromagnetic fields, it is possible the output from the HP ENVY may
be slightly distorted
•
HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize
injected noise due to potential high electromagnetic fields
Print resolution
To learn more about the printer resolution, see the printer software.
Paper specifications
Type
Paper weight
Input tray*
Output tray†
Photo tray*
Plain paper
16 to 24 lb. (60 to
90 gsm)
Up to 125 (20 lb.
paper)
50 (20 lb. paper)
n/a
Legal paper
Cards
16 to 24 lb. (60 to
90 gsm)
Up to 125 (20 lb.
paper)
10 (20 lb. paper)
n/a
Up to 75 lb. (281
gsm)
Up to 60
25
15
Up to 20
n/a
Envelopes
20 to 24 lb. (75 to
90 gsm)
Up to 15
46
Technical information
(continued)
Type
Paper weight
Input tray*
Up to 40
Up to 40
Up to 40
Output tray†
Photo tray*
n/a
Transparency film
Labels
n/a
n/a
25
25
25
n/a
5 x 7 inch (13 x 18 cm) Up to 75 lb (281
Up to 20
Photo paper
gsm)
(236 gsm)
4 x 6 inch (10 x 15 cm) Up to 75 lb. (281
Up to 40
Up to 40
25
25
Up to 20
n/a
Photo paper
gsm)
(236 gsm)
8.5 x 11 inch (216 x 279 Up to 75 lb. (281
mm) Photo paper gsm)
*
Maximum capacity.
†
Output tray capacity is affected by the type of paper and the amount of ink you are using.
HP recommends emptying the output tray frequently. FAST DRAFT print quality mode
requiresthe extender tray to be extended and the end tray rotated up. Without the end tray
rotated up, both letter and legal-sized paper will fall on the first sheet.
*
NOTE: For a complete list of supported media sizes, see the printer driver.
Two-sided printing accessory paper specifications - all regions except Japan
Type
Size
Weight
Paper
Letter: 8.5 x 11 inches
Executive: 7.25 x 10.5 inches
A4: 210 x 297 mm
16 to 24 lb. (60 to 90 gsm)
B5 (ISO): 176 x 250 mm B5
(JIS): 182 x 257 mm
Brochure paper
Letter: 8.5 x 11 inches
A4: 210 x 297 mm
Up to 48 lb. (180 gsm)
Two-sided printing accessory paper specifications - Japan only
Type
Size
Weight
Paper
Letter: 8.5 x 11 inches
Executive: 7.25 x 10.5 inches
A4: 210 x 297 mm
60 to 90 g/m2 (16 to 24 lb.)
A5: 148 x 210 mm
B5 (ISO): 176 x 250 mm B5
(JIS): 182 x 257 mm
Brochure paper
Letter: 8.5 x 11 inches
A4: 210 x 297 mm
Up to 180 g/m2 (48 lb. bond)
Up to 200 g/m2 (110 lb. index)
Cards and photos
4 x 6 inches
Specifications
47
Chapter 9
(continued)
Type
Size
Weight
5 x 8 inches
10 x 15 cm
A6: 105 x 148.5 mm
Hagaki: 100 x 148 mm
Alignment skew
.006 mm/mm on plain paper (2nd side)
NOTE: Media type availability varies by country/region.
Print specifications
•
•
•
•
Print speeds vary according to the complexity of the document
Panorama-size printing
Method: drop-on-demand thermal inkjet
Language: PCL3 GUI
Copy specifications
•
•
•
•
•
Digital image processing
Maximum number of copies varies by model
Copy speeds vary according to the complexity of the document and model
Maximum copy enlargement ranging from 200-400% (depends on model)
Maximum copy reduction ranging from 25-50% (depends on model)
Ink cartridge yield
Scan specifications
•
•
•
Image editor included
Twain-compliant software interface
Resolution: up to 1200 x 2400 ppi optical (depends on model); 19200 ppi enhanced (software)
For more information about ppi resolution, see the scanner software.
Color: 48-bit color, 8-bit grayscale (256 levels of gray)
Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)
•
•
Environmental product stewardship program
Hewlett-Packard is committed to providing quality products in an environmentally sound manner.
Design for recycling has been incorporated into this product. The number of materials has been kept
to a minimum while ensuring proper functionality and reliability. Dissimilar materials have been
designed to separate easily. Fasteners and other connections are easy to locate, access, and
remove using common tools. High priority parts have been designed to access quickly for efficient
disassembly and repair.
For more information, visit HP’s Commitment to the Environment Web site at:
This section contains the following topics:
•
•
•
•
48
Technical information
•
•
•
•
•
•
•
•
•
•
•
Eco-Tips
HP is committed to helping customers reduce their environmental footprint. HP has provided the
Eco-Tips below to help you focus on ways to assess and reduce the impact of your printing choices.
In addition to specific features in this product, please visit the HP Eco Solutions web site for more
information on HP’s environmental initiatives.
Your product's Eco features
•
•
•
•
Duplex printing: Use Paper-saving Printing to print two-sided documents with multiple pages
on same sheet to reduce paper usage.
Smart Web printing: The HP Smart Web Printing interface includes a Clip Book and Edit
Clips window where you can store, organize, or print clips you have gathered from the Web.
Energy Savings information: To determine the ENERGY STAR® qualification status for this
Recycled Materials: For more information regarding recycling of HP products, please visit:
Paper use
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability
to identify plastics for recycling purposes at the end of product life.
Material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP Web site at:
Recycling program
HP offers an increasing number of product return and recycling programs in many countries/regions,
and partners with some of the largest electronic recycling centers throughout the world. HP
conserves resources by reselling some of its most popular products. For more information regarding
recycling of HP products, please visit:
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is
available in many countries/regions, and lets you recycle used print cartridges and ink cartridges
free of charge. For more information, go to the following Web site:
Environmental product stewardship program
49
Chapter 9
Set the Energy Save Mode
When you turn off the HP ENVY, it goes into Energy Save mode by default. This makes the product
more energy efficient, but also means it can take longer than expected to turn the product on.
Additionally, when turned off in Energy Save mode, the HP ENVY might not be able to complete
some automated maintenance tasks. If you routinely see messages on the display about a real-time
clock failure or if you want to reduce the start-up time, you can turn off the Energy Save mode.
NOTE: This feature is on by default.
To turn energy saving mode on or off
1. Touch the Setup icon.
2. Touch Preferences.
3. Touch the down arrow to scroll through the options, and then touch Energy Save Mode.
4. Touch On or Off.
Power consumption
Hewlett-Packard printing and imaging equipment marked with the ENERGY STAR® logo is qualified
to the U.S. Environmental Protection Agency’s ENERGY STAR specifications for imaging
equipment. The following mark will appear on ENERGY STAR qualified imaging products:
Additional ENERGY STAR qualified imaging product model information is listed at: www.hp.com/
50
Technical information
Disposal of waste equipment by users in private households in the European Union
Disposal of Waste Equipment by Users in Private Households in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment
at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where
you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Évacuation des équipements usagés par les utilisateurs dans les foyers privés au sein de l'Union européenne
La présence de ce symbole sur le produit ou sur son emballage indique que vous ne pouvez pas vous débarrasser de ce produit de la même façon que vos déchets courants.
Au contraire, vous êtes responsable de l'évacuation de vos équipements usagés et, à cet effet, vous êtes tenu de les remettre à un point de collecte agréé pour le recyclage des
équipements électriques et électroniques usagés. Le tri, l'évacuation et le recyclage séparés de vos équipements usagés permettent de préserver les ressources naturelles et de s'assurer
que ces équipements sont recyclés dans le respect de la santé humaine et de l'environnement. Pour plus d'informations sur les lieux de collecte des équipements usagés, veuillez contacter
votre mairie, votre service de traitement des déchets ménagers ou le magasin où vous avez acheté le produit.
Entsorgung von Elektrogeräten durch Benutzer in privaten Haushalten in der EU
Dieses Symbol auf dem Produkt oder dessen Verpackung gibt an, dass das Produkt nicht zusammen mit dem Restmüll entsorgt werden darf. Es obliegt daher Ihrer Verantwortung, das
Gerät an einer entsprechenden Stelle für die Entsorgung oder Wiederverwertung von Elektrogeräten aller Art abzugeben (z.B. ein Wertstoffhof). Die separate Sammlung und das
Recyceln Ihrer alten Elektrogeräte zum Zeitpunkt ihrer Entsorgung trägt zum Schutz der Umwelt bei und gewährleistet, dass sie auf eine Art und Weise recycelt werden, die keine
Gefährdung für die Gesundheit des Menschen und der Umwelt darstellt. Weitere Informationen darüber, wo Sie alte Elektrogeräte zum Recyceln abgeben können, erhalten Sie bei
den örtlichen Behörden, Wertstoffhöfen oder dort, wo Sie das Gerät erworben haben.
Smaltimento di apparecchiature da rottamare da parte di privati nell'Unione Europea
Questo simbolo che appare sul prodotto o sulla confezione indica che il prodotto non deve essere smaltito assieme agli altri rifiuti domestici. Gli utenti devono provvedere allo
smaltimento delle apparecchiature da rottamare portandole al luogo di raccolta indicato per il riciclaggio delle apparecchiature elettriche ed elettroniche. La raccolta e il riciclaggio
separati delle apparecchiature da rottamare in fase di smaltimento favoriscono la conservazione delle risorse naturali e garantiscono che tali apparecchiature vengano rottamate
nel rispetto dell'ambiente e della tutela della salute. Per ulteriori informazioni sui punti di raccolta delle apparecchiature da rottamare, contattare il proprio comune di residenza,
il servizio di smaltimento dei rifiuti locale o il negozio presso il quale è stato acquistato il prodotto.
Eliminación de residuos de aparatos eléctricos y electrónicos por parte de usuarios domésticos en la Unión Europea
Este símbolo en el producto o en el embalaje indica que no se puede desechar el producto junto con los residuos domésticos. Por el contrario, si debe eliminar este tipo de residuo, es
responsabilidad del usuario entregarlo en un punto de recogida designado de reciclado de aparatos electrónicos y eléctricos. El reciclaje y la recogida por separado de estos residuos
en el momento de la eliminación ayudará a preservar recursos naturales y a garantizar que el reciclaje proteja la salud y el medio ambiente. Si desea información adicional sobre los
lugares donde puede dejar estos residuos para su reciclado, póngase en contacto con las autoridades locales de su ciudad, con el servicio de gestión de residuos domésticos o con la
tienda donde adquirió el producto.
Likvidace vysloužilého zařízení uživateli v domácnosti v zemích EU
Tato značka na produktu nebo na jeho obalu označuje, že tento produkt nesmí být likvidován prostým vyhozením do běžného domovního odpadu. Odpovídáte za to, že vysloužilé
zařízení bude předáno k likvidaci do stanovených sběrných míst určených k recyklaci vysloužilých elektrických a elektronických zařízení. Likvidace vysloužilého zařízení samostatným
sběrem a recyklací napomáhá zachování přírodních zdrojů a zajišťuje, že recyklace proběhne způsobem chránícím lidské zdraví a životní prostředí. Další informace o tom, kam můžete
vysloužilé zařízení předat k recyklaci, můžete získat od úřadů místní samosprávy, od společnosti provádějící svoz a likvidaci domovního odpadu nebo v obchodě, kde jste produkt
zakoupili.
Bortskaffelse af affaldsudstyr for brugere i private husholdninger i EU
Dette symbol på produktet eller på dets emballage indikerer, at produktet ikke må bortskaffes sammen med andet husholdningsaffald. I stedet er det dit ansvar at bortskaffe affaldsudstyr
ved at aflevere det på dertil beregnede indsamlingssteder med henblik på genbrug af elektrisk og elektronisk affaldsudstyr. Den separate indsamling og genbrug af dit affaldsudstyr på
tidspunktet for bortskaffelse er med til at bevare naturlige ressourcer og sikre, at genbrug finder sted på en måde, der beskytter menneskers helbred samt miljøet. Hvis du vil vide mere
om, hvor du kan aflevere dit affaldsudstyr til genbrug, kan du kontakte kommunen, det lokale renovationsvæsen eller den forretning, hvor du købte produktet.
Afvoer van afgedankte apparatuur door gebruikers in particuliere huishoudens in de Europese Unie
Dit symbool op het product of de verpakking geeft aan dat dit product niet mag worden afgevoerd met het huishoudelijk afval. Het is uw verantwoordelijkheid uw afgedankte apparatuur
af te leveren op een aangewezen inzamelpunt voor de verwerking van afgedankte elektrische en elektronische apparatuur. De gescheiden inzameling en verwerking van uw afgedankte
apparatuur draagt bij tot het sparen van natuurlijke bronnen en tot het hergebruik van materiaal op een wijze die de volksgezondheid en het milieu beschermt. Voor meer informatie over
waar u uw afgedankte apparatuur kunt inleveren voor recycling kunt u contact opnemen met het gemeentehuis in uw woonplaats, de reinigingsdienst of de winkel waar u het product
hebt aangeschaft.
Eramajapidamistes kasutuselt kõrvaldatavate seadmete käitlemine Euroopa Liidus
Kui tootel või toote pakendil on see sümbol, ei tohi seda toodet visata olmejäätmete hulka. Teie kohus on viia tarbetuks muutunud seade selleks ettenähtud elektri- ja elektroonikaseadmete
utiliseerimiskohta. Utiliseeritavate seadmete eraldi kogumine ja käitlemine aitab säästa loodusvarasid ning tagada, et käitlemine toimub inimeste tervisele ja keskkonnale ohutult.
Lisateavet selle kohta, kuhu saate utiliseeritava seadme käitlemiseks viia, saate küsida kohalikust omavalitsusest, olmejäätmete utiliseerimispunktist või kauplusest, kust te seadme
ostsite.
Hävitettävien laitteiden käsittely kotitalouksissa Euroopan unionin alueella
Tämä tuotteessa tai sen pakkauksessa oleva merkintä osoittaa, että tuotetta ei saa hävittää talousjätteiden mukana. Käyttäjän velvollisuus on huolehtia siitä, että hävitettävä laite
toimitetaan sähkö- ja elektroniikkalaiteromun keräyspisteeseen. Hävitettävien laitteiden erillinen keräys ja kierrätys säästää luonnonvaroja. Näin toimimalla varmistetaan myös,
että kierrätys tapahtuu tavalla, joka suojelee ihmisten terveyttä ja ympäristöä. Saat tarvittaessa lisätietoja jätteiden kierrätyspaikoista paikallisilta viranomaisilta, jäteyhtiöiltä tai tuotteen
jälleenmyyjältä.
Απόρριψη άχρηστων συσκευών στην Ευρωπαϊκή Ένωση
Το παρόν σύμβολο στον εξοπλισμό ή στη συσκευασία του υποδεικνύει ότι το προϊόν αυτό δεν πρέπει να πεταχτεί μαζί με άλλα οικιακά απορρίμματα. Αντίθετα, ευθύνη σας είναι να
απορρίψετε τις άχρηστες συσκευές σε μια καθορισμένη μονάδα συλλογής απορριμμάτων για την ανακύκλωση άχρηστου ηλεκτρικού και ηλεκτρονικού εξοπλισμού. Η χωριστή συλλογή και
ανακύκλωση των άχρηστων συσκευών θα συμβάλει στη διατήρηση των φυσικών πόρων και στη διασφάλιση ότι θα ανακυκλωθούν με τέτοιον τρόπο, ώστε να προστατεύεται η υγεία των
ανθρώπων και το περιβάλλον. Για περισσότερες πληροφορίες σχετικά με το πού μπορείτε να απορρίψετε τις άχρηστες συσκευές για ανακύκλωση, επικοινωνήστε με τις κατά τόπους αρμόδιες
αρχές ή με το κατάστημα από το οποίο αγοράσατε το προϊόν.
A hulladékanyagok kezelése a magánháztartásokban az Európai Unióban
Ez a szimbólum, amely a terméken vagy annak csomagolásán van feltüntetve, azt jelzi, hogy a termék nem kezelhető együtt az egyéb háztartási hulladékkal. Az Ön feladata,
hogy a készülék hulladékanyagait eljuttassa olyan kijelölt gyűjtőhelyre, amely az elektromos hulladékanyagok és az elektronikus berendezések újrahasznosításával foglalkozik.
A hulladékanyagok elkülönített gyűjtése és újrahasznosítása hozzájárul a természeti erőforrások megőrzéséhez, egyúttal azt is biztosítja, hogy a hulladék újrahasznosítása az
egészségre és a környezetre nem ártalmas módon történik. Ha tájékoztatást szeretne kapni azokról a helyekről, ahol leadhatja újrahasznosításra a hulladékanyagokat, forduljon
a helyi önkormányzathoz, a háztartási hulladék begyűjtésével foglalkozó vállalathoz vagy a termék forgalmazójához.
Lietotāju atbrīvošanās no nederīgām ierīcēm Eiropas Savienības privātajās mājsaimniecībās
Šis simbols uz ierīces vai tās iepakojuma norāda, ka šo ierīci nedrīkst izmest kopā ar pārējiem mājsaimniecības atkritumiem. Jūs esat atbildīgs par atbrīvošanos no nederīgās ierīces,
to nododot norādītajā savākšanas vietā, lai tiktu veikta nederīgā elektriskā un elektroniskā aprīkojuma otrreizējā pārstrāde. Speciāla nederīgās ierīces savākšana un otrreizējā pārstrāde
palīdz taupīt dabas resursus un nodrošina tādu otrreizējo pārstrādi, kas sargā cilvēku veselību un apkārtējo vidi. Lai iegūtu papildu informāciju par to, kur otrreizējai pārstrādei var
nogādāt nederīgo ierīci, lūdzu, sazinieties ar vietējo pašvaldību, mājsaimniecības atkritumu savākšanas dienestu vai veikalu, kurā iegādājāties šo ierīci.
Europos Sąjungos vartotojų ir privačių namų ūkių atliekamos įrangos išmetimas
Šis simbolis ant produkto arba jo pakuotės nurodo, kad produktas negali būti išmestas kartu su kitomis namų ūkio atliekomis. Jūs privalote išmesti savo atliekamą įrangą atiduodami ją
į atliekamos elektronikos ir elektros įrangos perdirbimo punktus. Jei atliekama įranga bus atskirai surenkama ir perdirbama, bus išsaugomi natūralūs ištekliai ir užtikrinama, kad įranga
yra perdirbta žmogaus sveikatą ir gamtą tausojančiu būdu. Dėl informacijos apie tai, kur galite išmesti atliekamą perdirbti skirtą įrangą kreipkitės į atitinkamą vietos tarnybą, namų ūkio
atliekų išvežimo tarnybą arba į parduotuvę, kurioje pirkote produktą.
Utylizacja zużytego sprzętu przez użytkowników domowych w Unii Europejskiej
Symbol ten umieszczony na produkcie lub opakowaniu oznacza, że tego produktu nie należy wyrzucać razem z innymi odpadami domowymi. Użytkownik jest odpowiedzialny za
dostarczenie zużytego sprzętu do wyznaczonego punktu gromadzenia zużytych urządzeń elektrycznych i elektronicznych. Gromadzenie osobno i recykling tego typu odpadów
przyczynia się do ochrony zasobów naturalnych i jest bezpieczny dla zdrowia i środowiska naturalnego. Dalsze informacje na temat sposobu utylizacji zużytych urządzeń można
uzyskać u odpowiednich władz lokalnych, w przedsiębiorstwie zajmującym się usuwaniem odpadów lub w miejscu zakupu produktu.
Descarte de equipamentos por usuários em residências da União Européia
Este símbolo no produto ou na embalagem indica que o produto não pode ser descartado junto com o lixo doméstico. No entanto, é sua responsabilidade levar os equipamentos
a serem descartados a um ponto de coleta designado para a reciclagem de equipamentos eletro-eletrônicos. A coleta separada e a reciclagem dos equipamentos no momento do
descarte ajudam na conservação dos recursos naturais e garantem que os equipamentos serão reciclados de forma a proteger a saúde das pessoas e o meio ambiente. Para obter mais
informações sobre onde descartar equipamentos para reciclagem, entre em contato com o escritório local de sua cidade, o serviço de limpeza pública de seu bairro ou a loja em que
adquiriu o produto.
Postup používateľov v krajinách Európskej únie pri vyhadzovaní zariadenia v domácom používaní do odpadu
Tento symbol na produkte alebo na jeho obale znamená, že nesmie by vyhodený s iným komunálnym odpadom. Namiesto toho máte povinnos odovzda toto zariadenie na zbernom
mieste, kde sa zabezpečuje recyklácia elektrických a elektronických zariadení. Separovaný zber a recyklácia zariadenia určeného na odpad pomôže chráni prírodné zdroje a
zabezpečí taký spôsob recyklácie, ktorý bude chráni ľudské zdravie a životné prostredie. Ďalšie informácie o separovanom zbere a recyklácii získate na miestnom obecnom úrade,
vo firme zabezpečujúcej zber vášho komunálneho odpadu alebo v predajni, kde ste produkt kúpili.
Ravnanje z odpadno opremo v gospodinjstvih znotraj Evropske unije
Ta znak na izdelku ali embalaži izdelka pomeni, da izdelka ne smete odlagati skupaj z drugimi gospodinjskimi odpadki. Odpadno opremo ste dolžni oddati na določenem zbirnem
mestu za recikliranje odpadne električne in elektronske opreme. Z ločenim zbiranjem in recikliranjem odpadne opreme ob odlaganju boste pomagali ohraniti naravne vire in zagotovili,
da bo odpadna oprema reciklirana tako, da se varuje zdravje ljudi in okolje. Več informacij o mestih, kjer lahko oddate odpadno opremo za recikliranje, lahko dobite na občini,
v komunalnem podjetju ali trgovini, kjer ste izdelek kupili.
Kassering av förbrukningsmaterial, för hem- och privatanvändare i EU
Produkter eller produktförpackningar med den här symbolen får inte kasseras med vanligt hushållsavfall. I stället har du ansvar för att produkten lämnas till en behörig återvinningsstation
för hantering av el- och elektronikprodukter. Genom att lämna kasserade produkter till återvinning hjälper du till att bevara våra gemensamma naturresurser. Dessutom skyddas både
människor och miljön när produkter återvinns på rätt sätt. Kommunala myndigheter, sophanteringsföretag eller butiken där varan köptes kan ge mer information om var du lämnar
kasserade produkter för återvinning.
Chemical Substances
HP is committed to providing our customers with information about the chemical substances in our
products as needed to comply with legal requirements such as REACH (Regulation EC No
1907/2006 of the European Parliament and the Council). A chemical information report for this
Environmental product stewardship program
51
Chapter 9
Toxic and hazardous substance table
Battery disposal in the Netherlands
Dit HP Product bevat een lithium-manganese-dioxide
batterij. Deze bevindt zich op de hoofdprintplaat.
Wanneer deze batterij leeg is, moet deze volgens de
geldende regels worden afgevoerd.
Battery disposal in Taiwan
Attention California users
The battery supplied with this product may contain perchlorate material. Special handling may apply.
For more information, go to the following Web site:
52
Technical information
EU battery directive
European Union Battery Directive
This product contains a battery that is used to maintain data integrity of real time clock or product settings and is designed to last the life of the
product. Any attempt to service or replace this battery should be performed by a qualified service technician.
Directive sur les batteries de l'Union Européenne
Ce produit contient une batterie qui permet de maintenir l'intégrité des données pour les paramètres du produit ou l'horloge en temps réel et qui a
été conçue pour durer aussi longtemps que le produit. Toute tentative de réparation ou de remplacement de cette batterie doit être effectuée par un
technicien qualifié.
Batterie-Richtlinie der Europäischen Union
Dieses Produkt enthält eine Batterie, die dazu dient, die Datenintegrität der Echtzeituhr sowie der Produkteinstellungen zu erhalten, und die für die
Lebensdauer des Produkts ausreicht. Im Bedarfsfall sollte das Instandhalten bzw. Austauschen der Batterie von einem qualifizierten Servicetechniker
durchgeführt werden.
Direttiva dell'Unione Europea relativa alla raccolta, al trattamento e allo smaltimento di batterie e accumulatori
Questo prodotto contiene una batteria utilizzata per preservare l'integrità dei dati dell'orologio in tempo reale o delle impostazioni del prodotto e
la sua durata si intende pari a quella del prodotto. Eventuali interventi di riparazione o sostituzione della batteria devono essere eseguiti da un
tecnico dell'assistenza qualificato.
Directiva sobre baterías de la Unión Europea
Este producto contiene una batería que se utiliza para conservar la integridad de los datos del reloj de tiempo real o la configuración del producto
y está diseñada para durar toda la vida útil del producto. El mantenimiento o la sustitución de dicha batería deberá realizarla un técnico de
mantenimiento cualificado.
Směrnice Evropské unie pro nakládání s bateriemi
Tento výrobek obsahuje baterii, která slouží k uchování správných dat hodin reálného času nebo nastavení výrobku. Baterie je navržena tak, aby
vydržela celou životnost výrobku. Jakýkoliv pokus o opravu nebo výměnu baterie by měl provést kvalifikovaný servisní technik.
EU's batteridirektiv
Produktet indeholder et batteri, som bruges til at vedligeholde dataintegriteten for realtidsur- eller produktindstillinger og er beregnet til at holde i
hele produktets levetid. Service på batteriet eller udskiftning bør foretages af en uddannet servicetekniker.
Richtlijn batterijen voor de Europese Unie
Dit product bevat een batterij die wordt gebruikt voor een juiste tijdsaanduiding van de klok en het behoud van de productinstellingen. Bovendien is
deze ontworpen om gedurende de levensduur van het product mee te gaan. Het onderhoud of de vervanging van deze batterij moet door een
gekwalificeerde onderhoudstechnicus worden uitgevoerd.
Euroopa Liidu aku direktiiv
Toode sisaldab akut, mida kasutatakse reaalaja kella andmeühtsuse või toote sätete säilitamiseks. Aku on valmistatud kestma terve toote kasutusaja.
Akut tohib hooldada või vahetada ainult kvalifitseeritud hooldustehnik.
Euroopan unionin paristodirektiivi
Tämä laite sisältää pariston, jota käytetään reaaliaikaisen kellon tietojen ja laitteen asetusten säilyttämiseen. Pariston on suunniteltu kestävän laitteen
koko käyttöiän ajan. Pariston mahdollinen korjaus tai vaihto on jätettävä pätevän huoltohenkilön tehtäväksi.
Οδηγία της Ευρωπαϊκής Ένωσης για τις ηλεκτρικές στήλες
Αυτό το προϊόν περιλαμβάνει μια μπαταρία, η οποία χρησιμοποιείται για τη διατήρηση της ακεραιότητας των δεδομένων ρολογιού πραγματικού
χρόνου ή των ρυθμίσεων προϊόντος και έχει σχεδιαστεί έτσι ώστε να διαρκέσει όσο και το προϊόν. Τυχόν απόπειρες επιδιόρθωσης ή αντικατάστασης
αυτής της μπαταρίας θα πρέπει να πραγματοποιούνται από κατάλληλα εκπαιδευμένο τεχνικό.
Az Európai unió telepek és akkumulátorok direktívája
A termék tartalmaz egy elemet, melynek feladata az, hogy biztosítsa a valós idejű óra vagy a termék beállításainak adatintegritását. Az elem úgy
van tervezve, hogy végig kitartson a termék használata során. Az elem bármilyen javítását vagy cseréjét csak képzett szakember végezheti el.
Eiropas Savienības Bateriju direktīva
Produktam ir baterija, ko izmanto reālā laika pulksteņa vai produkta iestatījumu datu integritātes saglabāšanai, un tā ir paredzēta visam produkta
dzīves ciklam. Jebkura apkope vai baterijas nomaiņa ir jāveic atbilstoši kvalificētam darbiniekam.
Europos Sąjungos baterijų ir akumuliatorių direktyva
Šiame gaminyje yra baterija, kuri naudojama, kad būtų galima prižiūrėti realaus laiko laikrodžio veikimą arba gaminio nuostatas; ji skirta veikti
visą gaminio eksploatavimo laiką. Bet kokius šios baterijos aptarnavimo arba keitimo darbus turi atlikti kvalifikuotas aptarnavimo technikas.
Dyrektywa Unii Europejskiej w sprawie baterii i akumulatorów
Produkt zawiera baterię wykorzystywaną do zachowania integralności danych zegara czasu rzeczywistego lub ustawień produktu, która
podtrzymuje działanie produktu. Przegląd lub wymiana baterii powinny być wykonywane wyłącznie przez uprawnionego technika serwisu.
Diretiva sobre baterias da União Européia
Este produto contém uma bateria que é usada para manter a integridade dos dados do relógio em tempo real ou das configurações do produto e
é projetada para ter a mesma duração que este. Qualquer tentativa de consertar ou substituir essa bateria deve ser realizada por um técnico
qualificado.
Smernica Európskej únie pre zaobchádzanie s batériami
Tento výrobok obsahuje batériu, ktorá slúži na uchovanie správnych údajov hodín reálneho času alebo nastavení výrobku. Batéria je skonštruovaná
tak, aby vydržala celú životnosť výrobku. Akýkoľvek pokus o opravu alebo výmenu batérie by mal vykonať kvalifikovaný servisný technik.
Direktiva Evropske unije o baterijah in akumulatorjih
V tem izdelku je baterija, ki zagotavlja natančnost podatkov ure v realnem času ali nastavitev izdelka v celotni življenjski dobi izdelka. Kakršno koli
popravilo ali zamenjavo te baterije lahko izvede le pooblaščeni tehnik.
EU:s batteridirektiv
Produkten innehåller ett batteri som används för att upprätthålla data i realtidsklockan och produktinställningarna. Batteriet ska räcka produktens
hela livslängd. Endast kvalificerade servicetekniker får utföra service på batteriet och byta ut det.
Директива за батерии на Европейския съюз
Този продукт съдържа батерия, която се използва за поддържане на целостта на данните на часовника в реално време или настройките за
продукта, създадена на издържи през целия живот на продукта. Сервизът или замяната на батерията трябва да се извършва от квалифициран
техник.
Directiva Uniunii Europene referitoare la baterii
Acest produs conţine o baterie care este utilizată pentru a menţine integritatea datelor ceasului de timp real sau setărilor produsului şi care este
proiectată să funcţioneze pe întreaga durată de viaţă a produsului. Orice lucrare de service sau de înlocuire a acestei baterii trebuie efectuată de
un tehnician de service calificat.
Environmental product stewardship program
53
Chapter 9
Regulatory notices
The HP ENVY meets product requirements from regulatory agencies in your country/region.
This section contains the following topics:
•
•
•
•
•
•
•
•
Regulatory model identification number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is SNPRH-0902. This regulatory number should not be
confused with the marketing name (HP ENVY 100 e-All-in-One D410 series, etc.) or product
numbers (CN517, etc.).
54
Technical information
FCC statement
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specified
that the following notice be brought to the attention of users of this product.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
Reorient the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
For further information, contact:
Manager of Corporate Product Regulations
Hewlett-Packard Company
3000 Hanover Street
Palo Alto, Ca 94304
(650) 857-1501
Modifications (part 15.21)
The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by HP may void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
VCCI (Class B) compliance statement for users in Japan
䛣䛾⨨䛿䚸䜽䝷䝇Bሗᢏ⾡⨨䛷䛩䚹䛣䛾⨨䛿䚸ᐙᗞ⎔ቃ䛷⏝䛩䜛䛣䛸䜢┠ⓗ䛸䛧䛶
䛔䜎䛩䛜䚸䛣䛾⨨䛜䝷䝆䜸䜔䝔䝺䝡䝆䝵䞁ཷಙᶵ䛻㏆᥋䛧䛶⏝䛥䜜䜛䛸䚸ཷಙ㞀ᐖ䜢ᘬ䛝
㉳䛣䛩䛣䛸䛜䛒䜚䜎䛩䚹ྲྀᢅㄝ᫂᭩䛻ᚑ䛳䛶ṇ䛧䛔ྲྀ䜚ᢅ䛔䜢䛧䛶ୗ䛥䛔䚹
VCCI-B
Notice to users in Japan about the power cord
Regulatory notices
55
HP ENVY 100 e-All-in-One D410 series declaration of conformity
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
DoC #: SNPRH-0902 Rev A
Supplier's Name:
Supplier's Address:
Hewlett-Packard Company
20, Jia Feng Road Waigaoqiao Free Trade Zone Pudong, Shanghai
ˈ PRC 200131
declares, that the product
Product Name and Model:
HP Envy eAll-in-One
Regulatory Model Number:1) SNPRH-0902
Radio Module:
SDGOB-0892
Product Options:
All
conforms to the following Product Specifications and Regulations:
EMC:
CISPR 22: 2005 / EN 55022: 2006 Class B
EN 55024:1998 + A1:2001 + A2:2003
EN 61000-3-2: 2006
EN61000-3-3:1995+A1:2001+A2:2005
FCC CFR 47 Part 15 Class B / ICES-003,Issue 4 Class B
Safety:
EN 60950-1:2001+A11:2004 / IEC 60950-1:2001
EN 60825-1 1994+A1:2002+A2:2001
IEC 62311:2007 / EN 62311:2008
Telecom:
EN 300 328 V1.7.1:2006
EN 301 489-1 V1.8.1:2008 / EN 301 489-17 V1.3.2:2008
Energy Use˖
Regulation (EC) No. 1275/2008
ENERGY STAR® Qualified Imaging Equipment Operational Mode (OM) Test Procedure
Regulation (EC) No. 278/2009
Test Method for Calculating the Energy Efficiency of Single-Voltage External Ac-Dc and Ac-Ac Power Supplies
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive
2004/108/EC, the EuP Directive 2005/32/EC and the R&TTE Directive 9/5/EC and carries the CE-marking
accordingly. In addition it complies with the WEEE Directive 2002/96/EC and the RoHS Directive 2002/95/EC.
Additional Information:
1) This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the
design. The Regulatory Model Number is the main product identifier in the regulatory documentation and
test reports, this number should not be confused with the marketing name or the product numbers.
21th Feb 2010
Hu Jintao
ICS Product Hardware Quality Engineering Manager
Local contact for regulatory topics only:
EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany
U.S.: Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501
European Union Regulatory Notice
Products bearing the CE marking comply with the following EU Directives:
•
•
•
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
EuP Directive 2005/32/EC
CE compliance of this product is valid only if powered with the correct CE-marked AC adapter
provided by HP.
Regulatory notices
57
Chapter 9
If this product has telecommunications functionality, it also complies with the essential requirements
of the following EU Directive:
R&TTE Directive 1999/5/EC
Compliance with these directives implies conformity to applicable harmonized European standards
(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product
or product family and available (in English only) either within the product documentation or at the
The compliance is indicated by one of the following conformity markings placed on the product:
For non-telecommunications products
and for EU harmonized
telecommunications products, such as
Bluetooth® within power class below
10mW.
For EU non-harmonized
telecommunications products (If
applicable, a 4-digit notified body
number is inserted between CE and !).
Please refer to the regulatory label provided on the product.
The telecommunications functionality of this product may be used in the following EU and EFTA
countries: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg,
Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain,
Sweden, Switzerland, and United Kingdom.
The telephone connector (not available for all products) is intended for connection to analogue
telephone networks.
Some countries may have specific obligations or special requirements about the operation of
Wireless LAN networks such as indoor use only or restrictions of the channels available. Please
make sure that the country settings of the wireless network are correct.
Products with wireless LAN devices
Some countries may have specific obligations or special requirements about the operation of
Wireless LAN networks such as indoor use only or restrictions of the channels available. Please
make sure that the country settings of the wireless network are correct.
France
For 2.4-GHz Wireless LAN operation of this product, certain restrictions apply: This product may be
used indoors for the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 to 13). For outdoor
use, only the 2400-MHz to 2454-MHz frequency band (channels 1 to 7) may be used. For the latest
The point of contact for regulatory matters is:
Hewlett-Packard GmbH, Dept./MS: HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen,
GERMANY
Regulatory wireless statements
This section contains the following regulatory information pertaining to wireless products:
•
•
•
58
Technical information
•
•
Exposure to radio frequency radiation
Exposure to radio frequency radiation
Caution The radiated output power of this device is far below the FCC radio
frequency exposure limits. Nevertheless, the device shall be used in such a manner
that the potential for human contact during normal operation is minimized. This
product and any attached external antenna, if supported, shall be placed in such
a manner to minimize the potential for human contact during normal operation. In
order to avoid the possibility of exceeding the FCC radio frequency exposure
limits, human proximity to the antenna shall not be less than 20 cm (8 inches)
during normal operation.
Notice to users in Brazil
Aviso aos usuários no Brasil
Este equipamento opera em caráter secundário, isto é, não tem direito à proteção
contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar
interferência a sistemas operando em caráter primário. (Res.ANATEL 282/2001).
Notice to users in Canada
Notice to users in Canada/Note à l'attention des utilisateurs canadiens
For Indoor Use. This digital apparatus does not exceed the Class B limits for radio noise
emissions from the digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications. The internal wireless radio complies with RSS
210 and RSS GEN of Industry Canada.
Utiliser à l'intérieur. Le présent appareil numérique n'émet pas de bruit radioélectrique
dépassant les limites applicables aux appareils numériques de la classe B prescrites dans
le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications
du Canada. Le composant RF interne est conforme a la norme RSS-210 and RSS GEN
d'Industrie Canada.
Notice to users in Taiwan
Regulatory wireless statements
59
Chapter 9
European Union Notice
Products with 2.4-GHz wireless LAN devices
France
L'utilisation de cet equipement (2.4 GHz Wireless LAN) est soumise a certaines
restrictions: Cet equipement peut etre utilise a l'interieur d'un batiment en utilisant
toutes les frequences de 2400 a 2483.5 MHz (Chaine 1-13). Pour une utilisation en
environement exterieur, vous devez utiliser les frequences comprises entre 2400-2454
Italia
E’necessaria una concessione ministeriale anche per l’uso del prodotto. Verifici per
favore con il proprio distributore o direttamente presso la Direzione Generale
Pianificazione e Gestione Frequenze.
60
Technical information
Index
Symbols/Numerics
10 x 15 cm photo paper
specifications 46
P
paper
specifications 46
phone support 43
phone support period
period for support 44
photo paper
A
after the support period 44
specifications 46
print
specifications 48
printer found screen,
Windows 36
B
buttons, control panel 7
C
control panel
buttons 7
R
recycle
features 7
copy
ink cartridges 49
regulatory notices
regulatory model
identification number 54
wireless statements 58
specifications 48
customer support
E
encryption
S
scan
envelopes
specifications 46
environment
scan specifications 48
security
troubleshoot 34
system requirements 46
Environmental product
stewardship program 48
environmental
specifications 46
T
technical information
copy specifications 48
environmental
I
specifications 46
paper specifications 46
print specifications 48
scan specifications 48
system requirements 46
transparencies
L
labels
specifications 46
legal paper
specifications 46
letter paper
specifications 46
specifications 46
W
N
warranty 44
WEP key, setup 34
network
security 34
61
62
|