Frigidaire Portable Air Conditioner 2020252A0373 User Manual

All about the  
Use&Care  
of your  
Portable Air Conditioner  
TABLE OF CONTENTS  
Important Safety Instructions ............................... 2  
Air Conditioner Features ...................................... 7  
......................................... 8-10  
Product Registration ............................................. 3  
Normal Sounds .................................................... 3  
Unit Description ................................................... 4  
Accessories Included ............................................ 4  
Installation Instructions ........................................ 5-6  
Operating Instructions  
............................................... 10  
Care and Cleaning  
Before You Call ................................................... 11  
Major Appliance Warranty ................................... 12  
Product Registration & Normal Sounds  
Record Your Model and Serial Numbers  
Product Registration  
Record in the space provided below the model and serial numbers. On all models, the  
serial plate is located on the side of the cabinet.  
Model No.  
Serial No.  
Register Your Product  
The self-addressed PRODUCT REGISTRATION CARD should be filled in completely,  
signed and returned to the Frigidaire Company.  
Normal Sounds  
Sound of Rushing Air  
At the front of the unit, you may  
hear the sound of rushing air  
being moved by the fan.  
Gurgle/Hiss  
“Gurgling or hissing” noise may be  
heard due to refrigerant passing  
through evaporator during normal  
operation.  
High pitched Chatter  
Today’s high efficiency  
compressors may have a  
high pitched chatter during  
the cooling cycle.  
Vibration  
Unit may vibrate and make noise  
because of uneven floor.  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
3
Unit Description & Accessories Included  
Unit Description  
CONTROL PANEL  
ROOM AIR DISCHARGE  
AIR INTAKE  
CARRYING HANDLE  
(BOTH SIDES)  
EXHAUST  
DEHUMIDIFYING  
DRAIN OUTLET  
AIR OUTLET  
REMOTE CONTROL  
STORAGE DOOR  
EXHAUST HOSE  
(STORAGE WHEN  
NOT IN USE)  
EXHAUST  
ADAPTOR A  
REMOTE CONTROL  
CASTOR  
BOTTOM TRAY DRAIN OUTLET  
Fig. 1  
Accessories Included  
PARTS:  
PARTS NAME:  
Exhaust hose  
QUANTITY:  
1 pc  
1 pc  
1 pc  
1 set  
Unit/ Exhaust Adaptor A  
Window/ Exhaust Adaptor B  
Window Sliding Kit  
Foam Seal  
3 pcs  
1 pc  
Remote Control  
Battery(For remote control)  
Fig. 2  
2 pcs  
Check all the accessories are included in the package and please refer to the installation  
instructions for their usage.  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
4
Installation Instructions  
Installation Instructions  
EXAUSTING HOT AIR  
In the COOLING Mode the appliance must be placed close to a window or  
opening so that the warm exhaust air can be ducted outside.  
Take the hose out  
First position unit on a flat floor and make sure there’s a minimum of 12"  
clearance around the unit, and is within the vicinity of a single circuit outlet  
power source.  
1. Take the hose out from back of the unit (Fig. 3).  
2. Remove adaptor A from unit by sliding sideways (Fig. 4 ).  
3. Extend either side of the hose (Fig. 5) and screw the hose to  
adaptor A (Fig. 6) .  
Fig. 3  
4. Extend the other side of the hose and screw it to adaptor B (Fig. 7).  
5. Slide the assembly onto unit (Fig. 8).  
6. Affix the adaptor B into the window slider kit and seal. (Fig. 9&10)  
Vertical  
window  
Slide out  
Fig. 4  
Fig. 5  
Fig. 6  
Fig. 7  
Window Slider Kit  
Minimum:26.6"(67.5cm)  
Maxmum:48.5"(123cm)  
Fig. 9  
Extend the side of hose  
Horizontal  
window  
Window Slider Kit  
Minimum:26.6"(67.5cm)  
Maxmum:48.5"(123cm)  
Fig. 10  
The hose can be extended from its original length of 15" up to 55", but it is  
the best to keep the length to minimum required. Also make sure that the  
hose does not have any sharp bends or sags. (Fig. 11)  
Slide onto  
Fig. 8  
Fig. 11  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
5
Installation Instructions  
Installation Instructions  
(continued)  
Installation in a double-hung sash window  
1. Cut the foam seals(adhesive type) to the proper lengths and attach them  
to the window and stool. (Fig. 12)  
Foam seal A  
(adhesive type)  
2. Attach the window slider kit to the window stool. Adjust the length of  
the window slider kit according to the width of window. Cut the adjustable  
window slider kit if the width of window is less than 26.6 inches (Fig. 14).  
Open the window sash and place the window slider kit on the window  
stool. (Fig. 13)  
Fig. 12  
4. Close the window sash securely against the window slider kit. (Fig. 15)  
5. Cut the foam seal to an appropriate length and seal the open gap  
between the top window sash and outer window sash, as shown in Fig.16.  
Window slider kit  
26.6"~48.5"  
Window stool  
Fig. 13  
Fig. 14  
Foam seal  
Cut this side to fit your window  
Window slider kit  
Window stool  
Fig. 15  
Fig. 16  
Installation in a sliding sash window  
1. Cut the foam seals(adhesive type) to the proper lengths and attach them  
to the window frame. See Fig.17.  
Foam seal  
(adhesive type)  
2. Attach the window slider kit to the window stool. Adjust the length of  
the window slider kit according to the height of window. Cut the adjustable  
window slider kit if the height of window is less than 26.6 inches (Fig. 14).  
Open the window sash and place the window slider kit on the window  
stool. See Fig.18.  
Fig. 17  
Window slider kit  
4. Close the sliding sash securely against the window slider kit. (Fig. 19)  
5. Cut the foam seal to an appropriate length and seal the open gap  
between the sliding sash and outer window sash, as shown in Fig.20.  
26.6"~48.5"  
Window stool  
Fig. 18  
Foam seal  
Fig. 20  
Fig. 19  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
6
Air Conditioner Features  
Air Conditioner Features  
CONTROL PANEL  
TURNS UNIT ON OR OFF  
DISPLAYS REMOTE SIGNAL SWING  
CHECK FILTER  
RESET BUTTON TEMPERATURE/TIME  
RECEIVER  
BUTTON  
SETS MODE  
ACTIVATES TIMER  
ADJUSTS  
TEMPERATURE  
OR TIME  
SETS FAN SPEED  
SLEEP MODE  
Fig. 21  
REMOTE CONTROL  
MODE INDICATION  
FAN SPEED SELECTION  
TEMPERATURE/TIMER  
CONTROL BUTTONS  
FAN SPEED SELECTOR  
TIMER BUTTONS  
MODE SELECTOR  
SLEEP BUTTON  
SWING BUTTON  
ON/OFF BUTTON  
RESET + LOCK  
PIN BUTTONS  
Fig. 22  
Battery Size: AAA  
Warning: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-  
cadmium) batteries.  
NOTE  
The RESET button is depressed when you want to return to the initial factory settings. The LOCK button is depressed to  
lock the keypad so the settings cannot be changed. The key symbol will appear in the display of the remote control,  
depress the LOCK button again to release. Use a small pin to depress these buttons.  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
7
Operating Instructions  
Operating Instructions  
NOTE  
The following instructions represent the Control Panel, the same instructions can be used for the Remote Control.  
In this mode the exhaust adaptor hose MUST be used.  
COOLING MODE:  
1. Press the MODE button until the "Cool" indicator lights.  
2. Press the "  
" Temp buttons for desired setting.  
3. Press the FAN button for desired fan speed.  
In this mode you do not need to use the exhaust adaptor hose.  
1. Press the MODE button until the "Heat" indicator lights.  
HEATING MODE:  
(on some models)  
2. Press the "  
" Temp buttons for the desired heat setting.  
In this mode you do not need to use the exhaust adaptor hose, BUT the water  
collected must be discharged. See Drainage Section.  
DRY MODE:  
1. Press the MODE button until the "Dry" indicator lights.  
2. The fan will run at low speed and the display will show the room temperature.  
3. Keep doors windows closed for best effect.  
Always have the exhaust hose attached in this mode.  
AUTO MODE:  
When you set the air conditioner in AUTO mode, it will automatically select cooling,  
heating(inapplicable for cooling only models), or fan only operation depending on what  
temperature you have selected and the room temperature. The air conditioner will  
control room temperature automatically round the temperature point set by you. Under  
AUTO mode, you can not select the fan speed.  
In this mode there is no need to use the exhaust hose or drainage hose.  
However, if you require stale or smokey air to be removed from the room,  
hook up the duct accessories as described in the "EXHAUSTING HOT AIR"  
section.  
FAN MODE:  
1. Press the MODE button until the "Fan" indicator lights.  
2. Press the FAN button to choose the desired fan speed.  
3. The fan will run at the selected speed and the display will show the room temperature.  
TIMER OPERATION:  
You can set both delay stop and delay start while unit is in ON position or OFF position.  
When unit is in ON position, first press TIMER button to go to delay stop setting, then  
“timer off” light will illuminate, tap or hold the UP arrow ( ) or the DOWN arrow ( ) to  
change delay stop timer at 0.5 hour increments up to 10 hours, then at 1 hour increments  
up to 24 hours. Then press the TIMER button to confirm the setting (the control will confirm  
the setting automatically after 5 seconds) and go to delay start setting. Use the same way  
as above to set the delay start timing. If you don’t need to set delay start, press the  
TIMER button again to exit. After 5 seconds, the control will automatically change the  
display back to previous temperature display. If you want to check remain timing, press the  
TIMER button. The delay start operation automatically selects mode, temperature and  
fan speed the same as last operation you set.  
When unit is in OFF position, press TIMER button will first go to delay start setting, then  
“timer on” light will illuminate, set the delay start and delay stop timing the same way  
as above.  
To cancel the timer setting, simply tap ( ) or ( ) button to change the timing to 0.0.  
SLEEP OPERATION:  
In this mode the selected temperature will increase by 2 °F 30 minutes after the mode  
is selected. The temperature will then increase by another 2 °F after an additional 30  
minutes. This new temperature will be maintained for 7 hours before it returns to the  
originally selected temperature. This ends the "Sleep" mode and the unit will continue to  
operate as originally programmed. The "Sleep" mode program can be cancelled at any  
time during operation by again pressing the "Sleep" button.  
Note: This feature is unavailabe under FAN or DRY modes.  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
8
Operating Instructions  
Operating Instructions  
(continued)  
SWING OPERATION:  
When you turn on the unit, the louver will swing and stop at a certain angle. You  
can press the SWING button to let the louver swing automatically. Press the  
SWING button again while you want the louver stop at desired angle.  
CHECK FILTER FEATURE:  
This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more  
efficient operation. The LED (light) which above the "Filter" button will illuminate  
after 250 hours of operation. To reset after cleaning the filter, press the "Filter"  
button and the light will go off.  
FAULT CODE:  
If the display reads "EA" , the room temperature sensor has failed. Contact your Authorized  
Frigidaire Service Center.  
If the display reads "ES" , the evaporator temperature sensor has failed. Contact your  
Authorized Frigidaire Service Center.  
If the display reads "E4" , the display panel communication has failed. Contact your  
Authorized Frigidaire Service Center.  
If the display reads "P1" , bottom tray is full. Carefully move the unit to a drain location, remove  
the bottom drain plug and let the water drain away. Restart the machine until the "P1" symbol  
disappears. If error repeats, call for service.  
DRAINAGE:  
During dehumidifying mode, remove the supplied rubber stopper from the  
hose connector. Screw a suitable length of hose onto this connector. Place  
the open end into a suitable drain, and make sure there are no kinks in the  
hose. (Fig.23)  
Remove the  
drain plug  
Continuous  
drain hose  
Fig. 23  
Fig. 24  
REMOTE CONTROL STORAGE :  
The door on side of the unit is for storing the remote, to open press it as  
shown in Fig. 24, to close simply push it back into position.  
Press here  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
9
Operating Instructions, CARE & CLEANING  
Operating Instructions  
(continued)  
Now that you have mastered the operating procedure, here are more features in  
your control that you should become familiar with.  
The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned  
off and on quickly. This prevents overheating of the compressor and possible circuit  
breaker tripping. The fan will continue to run during this time.  
ADDITIONAL THINGS  
YOU SHOULD KNOW  
The control will maintain the set temperature within 2 °F, between 62 °F and  
86 °F (17 °C and 30 °C).  
The control is capable of displaying temperature in degrees Fahrenheit or degrees  
Celsius. To convert from one to the other and back, press and hold the "TEMP"  
Up (  
) and Down ( ) buttons together for 3 seconds.  
There is a 2-Second delay for the compressor shutting down when selecting  
FAN ONLY/HEAT. This is to cover the possibility of having to roll through to select  
another mode.  
After a power outage, the unit will memorize the last setting and return the unit to  
the same setting once power is restored.  
Clean your air conditioner occasionally to keep it looking new. Be sure to unplug  
the unit before cleaning to prevent shock or fire hazards.  
CARE & CLEANING  
Filter A  
Air Filter Cleaning  
This unit has three filters, they are filter A, B and C. Grasp the upper panel tab and  
take off the filter A which behind the grill of the back panel (Fig.25). Remove the  
lower filter B and C by loosening the screws. Take down the air inlet grille, then  
remove the air filter as shown in Fig.26 27.  
Wash the filter using liquid dishwashing detergent and warm water. Rinse filter  
thoroughly. Gently shake excess water from the filter. Be sure filter is thoroughly  
dry before replacing.  
Or, instead of washing you may vacuum the filter clean.  
Fig. 25  
Remove two  
screws and  
take the air  
intake grille  
down  
Cabinet Cleaning  
Be sure to unplug the air conditioner to prevent shock or fire hazard. The cabinet  
and front may be dusted with an oil-free cloth or washed with a cloth dampened  
in a solution of warm water and mild liquid dishwashing detergent. Rinse  
thoroughly and wipe dry.  
Never use harsh cleaners, wax or polish on the cabinet front.  
Be sure to wring excess water from the cloth before wiping around the controls.  
Excess water in or around the controls may cause damage to the air conditioner.  
Slide out the filter B  
behind the side panel  
Fig. 26  
Filter B  
Filter C  
Winter Storage  
If you plan to store the appliance during the winter, cover it with plastic or return  
it to its carton.  
Remove the filter C  
out from the grille  
Fig. 27  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
10  
Before You Call  
Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not  
the result of defective workmanship or materials in this appliance.  
OCCURRENCE  
SOLUTION  
Wall plug disconnected. Push plug firmly into wall outlet.  
Air conditioner will not operate.  
Plug Current Device Tripped. Press the RESET button.  
House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker.  
Control is OFF. Turn Control ON and set to desired setting.  
P1 appears in the display window. Drain water as described in Drainage Section.  
Shut off in Heat mode. When the air outlet exceeds 158 °F (70 °C), the automatic heat protection  
engages. Romove any blockages and let appliance cool down.  
Room Temperature lower than the set temperature (Cool Mode). Reset the temperature.  
Room Temperature higher than the set temperature (Heat Mode). Reset the temperature.  
Room temperature below 60°F (16°C). Cooling may not occur until room temperature rises above  
60°F (16°C).  
Air from unit does not feel cold  
enough.  
Reset to a lower temperature.  
Compressor shut-off by changing modes. Wait approximately 3 minutes and listen for compressor to  
restart when set in the COOL mode.  
Outdoor temperature below 60 O F (16 OC). To defrost the coil, set FAN ONLY mode.  
Air conditioner cooling, but room  
is too warm - ice forming  
on cooling coil behind decorative  
front  
Air filter may be dirty. Clean filter. Refer to Care and Cleaning section. To defrost, set to FAN ONLY  
mode.  
Temperature is set too low for night-time cooling. To defrost the coil, set to FAN ONLY mode. Then,  
set temperature to a higher setting.  
Exhaust duct not connected or blocked. See EXHAUSTING HOT AIR Section.  
Dirty air filter - air restricted. Clean air filter. Refer to Care and Cleaning section.  
Temperature is set too high. Set temperature to a lower setting.  
Air conditioner cooling, but room  
is too warm - NO ice forming on  
cooling coil behind decorative  
front.  
Air directional louvers positioned improperly. Position louvers for better air distribution.  
Front of unit is blocked by drapes, blinds, furniture, etc. - restricts air distribution. Clear blockage in  
front of unit.  
Doors, windows, registers, etc. open - cool air escapes. Close doors, windows, registers, etc.  
Unit recently turned on in hot room. Allow additional time to remove “stored heat” from walls, ceiling,  
floor and furniture.  
Dirty air filter - air restricted. Clean air filter.  
Air conditioner turns on and off  
rapidly.  
Outside temperature extremely hot. Set FAN speed to a faster setting to bring air through cooling coils  
more frequently.  
Air movement sound. This is normal. If too loud, set to lower FAN setting.  
Vibraion from uneven floor. Move or support appliance correctly on even surface.  
Noise when unit is cooling.  
Set temperature too low. lncrease set temperature.  
Set temperature too high. Lower setting.  
Room too cold.  
Room Too Hot.  
If These Solutions Fail, Call 1-800-944-9044 For Frigidaire Service.  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
11  
Major Appliance Warranty  
Your appliance is covered by a full one-year warranty and a limited 2-5 year warranty(sealed system). For one year from your  
original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be  
defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided  
instructions. From the second to the fifth year from your original purchase date, Electrolux will repair or replace any parts in the  
Sealed Refrigeration System (compressor, condenser, evaporator and tubing) proves to be defective in materials or workmanship.  
The consumer will be responsible for diagnostic costs and any removal, transportation and reinstallation costs which are required  
because of service, costs for labor, parts and transportation other than with respect to the Sealed Refrigeration System.  
Exclusions  
This warranty does not cover the following:  
1. Products with original serial numbers that have been removed, altered or cannot be readily determined.  
2. Product that has been transferred from its original owner to another party or removed outside the USA or  
Canada.  
3. Rust on the interior or exterior of the unit.  
4. Products purchased "as-is" are not covered by this warranty.  
5. Food loss due to any refrigerator or freezer failures.  
6. Products used in a commercial setting.  
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not  
in ordinary household use or used other than in accordance with the provided instructions.  
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.  
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,  
etc., which are not a part of the appliance when it is shipped from the factory.  
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs,  
handles, or other cosmetic parts.  
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip  
charges, or mileage expense for service calls to remote areas, including the state of Alaska.  
12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors,  
cabinets, walls, etc.  
13. Damages caused by: services performed by unauthorized service companies; use of parts other than  
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or external  
causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.  
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES  
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR  
REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST  
PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR  
CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES  
RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME  
STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE-  
QUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS  
OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.  
YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.  
If You Need Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period  
Service  
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.  
Service under this warranty must be obtained by contacting Electrolux at the addresses or phone  
numbers below.  
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances North  
America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp.  
Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under  
this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described  
or illustrated are subject to change without notice.  
USA  
Canada  
1.800.944.9044  
Electrolux Major Appliances  
North America  
1.800.265.8352  
Electrolux Canada Corp.  
5855 Terry Fox Way  
P.O. Box 212378  
Augusta, GA 30907  
Mississauga, Ontario, Canada  
L5V 3E4  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
12  

Briggs Stratton 351700 User Manual
Brother MFC 255CW User Manual
Canon Wireless Photo All In One 8335B026 User Manual
Cornelius ED Series User Manual
Epson Printer 1000 User Manual
Friedrich 000 User Manual
Friedrich WallMaster PTAC User Manual
Friedrich WALLMASTER WY12 User Manual
GE UF 4000 User Manual
Haier HWVR10XCK User Manual