Dakota Digital LED Tail Lights LAT NR161 User Manual

INSTALLATION INSTRUCTIONS  
LAT-NR161  
LED Tail Lights for ’60-‘65 Impala/Caprice, ’67 Impala,  
‘75-‘76 Caprice, and ’71-’73 Mustang  
MAN#650159b  
Kit Includes:  
Installation:  
1. Remove the original bulb connector from the back side of the housing.  
2. Remove the light bulb.  
3. Remove the tail light lens.  
On the 60-65 Impala, the screws are directly in the lens.  
On the 67 Impala, the nuts securing the tail light assembly must be removed first from  
inside the trunk. Once the assembly is removed, the screws on the back of the housing  
can be taken out.  
On the 75-76 Caprice, the nuts securing the tail light assembly must be removed first from  
inside the trunk. Once the assembly is removed, the screws on the top and bottom sides of  
the housing are removed and the metal trim taken off. Last the screws holding the lens are  
removed so the lens can come off.  
On the 71-73 Mustang, the lens is snapped into place with tabs around the outside edge.  
Carefully pry the lens off using a flat blade screwdriver.  
MAN#650159b  
8. Secure the back plate with the supplied #6 screw and lock washer.  
9. Place the original lens gasket into place and replace the tail light lens. Tighten the screws  
down carefully.  
MAN#650159b  
Cut off the existing light socket as it will not be used. Do not strip the wires. Trim the wires from  
LED assembly to appropriate length once mounted, making sure wires are routed cleanly and  
securely.  
10.Use the supplied moisture resistant pigtail connectors* to attach the wires from the new LED  
assembly to the existing vehicle harness. Insert appropriate wire from vehicle harness and  
mating LED assembly wire into a connector and crimp following instructions below.  
*For the best connection, soldering is recommended. But to simplify installation, the supplied connectors will provide  
a fast weather resistant connection.  
The correct crimp method for the supplied connectors is:  
1.) Insert UNSTRIPPED wires into the connector and ensure they are all they way in by  
observing the clear bottom of the connector to see the wires are touching the end.  
2.) Use pliers to push the blue cap down flush with the edge of the clear body, completing the  
connection. The connection will only be correct if pressed firmly down with pliers.  
Attach to metal bolt or screw for  
Ground connection with metal  
housings  
OR  
GREEN wire  
from LED  
assembly  
GREEN wire  
from LED  
assembly  
BROWN wire  
from LED  
assembly  
BROWN wire  
from LED  
assembly  
BLACK wire  
from LED  
assembly  
BLACK wire  
from LED  
assembly  
BLACK wire  
from LED  
assembly  
BLACK wire  
from LED  
assembly  
Turn Signal wire  
from vehicle  
harness  
Tail Light wire  
from vehicle  
harness  
Ground wire from  
vehicle harness  
with plastic housings  
LED wires  
Brown  
Green  
Vehicle harness  
Brown or Black  
Green or Pink  
Taillight  
Driver’s Turn  
Passenger’s Turn  
Ground  
Green  
Yellow, Purple, or Orange  
Black, chassis, or body  
Black  
11.Repeat for the other side.  
12.Test the tail lights, brake lights, and turn signals. If the turn signals do not flash you will need  
to upgrade your flasher. If you are replacing only the rear turn signals you should be able to  
use a heavy duty electronic flasher from your local parts store. If you are replacing both front  
and rear or do not have front bulbs you will need a no-load flasher, Dakota Digital part number  
LAT-NLF.  
SERVICE AND REPAIR  
DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any questions or problems you may be  
having installing one of our units.  
Should you ever need to send the unit back for repairs, please package the product in a good quality box along with plenty of packing material. Ship the product by UPS or insured Parcel  
Post. Be sure to include a complete description of the problem, your full name and address (street address preferred), and a telephone number where you can be reached during the day.  
An authorization number for products being returned for repair is needed. We will contact you if any repair charges exist. Any returns for warranty work must include a copy of the dated  
invoice or bill of sale.  
LED LIGHTING LIMITED LIFETIME WARRANTY  
DAKOTA DIGITAL (the Company) warrants to the ORIGINAL PURCHASER of this LED Lighting product under normal use and condition, be proven defective in material or  
workmanship DURING THE LIFETIME OF THE CAR IN WHICH IT WAS ORIGINALLY INSTALLED, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts  
or labor directly related to repairs of the defect(s).  
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of  
defects, transportation prepaid, to the factory. This Warranty is valid for the original purchaser only and may not be transferred.  
This warranty does not cover damage to vehicle electrical system. This Warranty does not apply to any product or part thereof which in the opinion of the Company has been  
damaged through alteration, improper installation, mishandling, misuse, neglect, or accident.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY, SHALL BE  
LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY MUST  
BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES  
FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other that  
expressed herein in connection with the sale of this product.  
FOR SERVICE SEND TO: DAKOTA DIGITAL, 4510 W. 61st ST N., SIOUX FALLS, SD 57107 USA (800) 852-3228  
Email us at [email protected]  
MAN#650159b  

Briggs Stratton 589447 User Manual
Carrier 42C User Manual
Cornelius Impulse Non Carbonated Post Mix Beverage Dispenser User Manual
Friedrich Air Conditioner SH20L50 A User Manual
GE AZ75H18EAC User Manual
Haier Air Conditioner HSU 18HKAGR2DB User Manual
Haier HSU 09CS03 User Manual
Holmes 243 User Manual
HP Hewlett Packard DesignJet 500 User Manual
HP Hewlett Packard OFFICEJET 7200 User Manual