Cornelius Agitator Motor 569000208 User Manual

IMI CORNELIUS INC g One Cornelius Place g Anoka, MN 55303-6234  
Telephone (800) 238-3600 Facsimile (612) 422-3246  
INSTALLING REPLACEMENT AGITATOR MOTOR  
KITS (P/N 569000207 AND P/N 569000208)  
ON  
VANTAGE DISPENSERS  
IMPORTANT: Only qualified Personnel should install this kit.  
Unpack and inspect the kit. Make sure all kit items are present and in good condition.  
Table 1. Loose-Shipped Parts  
Item  
No.  
Part No.  
Name  
Qty.  
1
314072000  
314150000  
Agitator Motor Ass’y, 115 VAC (Kit P/N 569000207)  
Agitator Motor Ass’y, 230 VAC (Kit P/N 569000208)  
1
1
2
3
4
319828000  
560001745  
000268010  
Screw, Thread Rolling, Phil Pn Hd; No. 10–24, .375 Long  
3
1
1
Mounting Template  
Drill Bit, 5/32  
REMOVING OLD AGITATOR MOTOR ASSEMBLY  
WARNING: Disconnect electrical power from the Unit to prevent personal injury before  
attempting any internal maintenance. Only qualified personnel should service the internal  
components or electrical wiring.  
1. Disconnect electrical power from the Dispenser.  
2. Remove hood from Dispenser, then remove cover from electrical control box (see Figure 1).  
3. Disconnect old agitator motor assembly electrical wires from L and L terminals on the PC board (see  
1
2
Figures 1 and 4) inside the electrical control box.  
4. Remove old agitator motor assembly from refrigeration deck. Discard old motor and it’s mounting screws.  
INSTALLING NEW AGITATOR MOTOR ASSEMBLY  
1. Cut out “AGIT PORT CUT-OUT” area of the MOUNTING TEMPLATE (item 3) with a scissors as shown in  
Figure 2. Remove adhesive covering from back side of the mounting template, then place template (align  
template holes with existing agitator motor mounting holes) over the existing agitator motor cut-out in the  
refrigeration deck.  
2. Temporarily install the electrical control box cover to protect the PC boards from metal shavings while  
drilling. Center punch two hole locations indicated on the mounting template, then using DRILL BIT (item 4)  
drill indicated holes in the refrigeration deck.  
May 20, 1997  
560001744  
EIMI Cornelius Inc; 1997  

Brother Printer MFC 8640D User Manual
Brother Printer MFC J6710DW User Manual
Dakota Digital SERIES II STR3D User Manual
Friedrich CP10 User Manual
Fujitsu Air Conditioner AWU24RXQ User Manual
GE General Electric Air Conditioner ASV05 User Manual
Haier AD482AMEAA User Manual
Haier Air Conditioner HTWR10XCK User Manual
Hisense Group KF 346GWE User Manual
Horizon Fuel Cell Technologies Automobile Parts 180 1010 User Manual