Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MX340/ PIXMA MX350/ PIXMA MX870
Mac OS
1
Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MX340/ PIXMA MX350/ PIXMA MX870
Mac OS
Important Information You Need Before Adding Your Multifunction
Installing the Drivers & Software
Registering the Printer & Scanner
4
5
10
3
Important Information You Need
Before Adding Your Multifunction
Important Information You Need Before Adding Your Multifunction
Before connecting the machine to the network, make sure that configuration of the computer and access point
or router is complete, and that the computer is connected to the network.
If your Multifunction printer has already been setup on another computer in your wireless network, it is only
necessary to install the Drivers and software and register the printer and scanner. No further settings need
to be made on the printer itself.
4
Installing the Drivers & Software
Installing the Drivers & Software
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The
installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of applications
to be installed.)
Step Two
Step One
Double-click the Setup icon of the CD-ROM folder to proceed to the
following screen.
Turn on the computer, then insert the Setup
CDROM into the CD-ROM drive
If the CD-ROM folder does not open automatically, double-click the
CD-ROM icon on the desktop.
5
Installing the Drivers & Software
Step Three
Step Four
Enter your administrator name and password. Click OK.
Click Easy Install. Click Install.
The drivers, application software, and on-screen manuals are installed all together.
If you do not know your administrator name or password, click
Help
, then follow the on-screen instructions.
6
Installing the Drivers & Software
Step Five
Step Six
Click Install
Select Use the printer on network, then click Next.
*Applications may vary by model
Follow any on-screen instructions to proceed with the software
installation.
7
Installing the Drivers & Software
Step Seven
Step Eight
Read the License Agreement screen carefully and click Yes.
When the Printer Detection screen appears, click Next
8
Installing the Drivers & Software
Step Nine
On the Canon IJ Network Tool screen, choose your model and click Next.
9
Registering the Printer & Scanner
Registering the Printer & Scanner
This section describes how to register the machine on a Macintosh computer.
Step One
When the Register Printer and Scanner screen appears,
click Register Printer.
Proceed to the section that relates to your operating
system for further installation instructions
Mac OS X v. 10.5.x / 10.6.x: Go to Step 2-A
Mac OS X v. 10.4.11: Go to Step 2-B
10
Registering the Printer & Scanner
Step Two
2-B
Step Two
2-A
1. When the Printer List window appears, click Add.
1. Select Canon IJ Network in the pop-up menu, select
Canon MXxxx series in the list of printers, then click Add .
*xxx refers to the model number. MX340 series shown in
example, below
2. Go to Step Three, page 13.
*The alphanumeric characters after Canon xxxx series is the machine's Bonjour
service name or MAC address
11
Registering the Printer & Scanner
Step Two (cont)
2-B
Step Two (cont)
2-B
2. Click More Printers in the Printer Browser window.
3. Select Canon IJ Network in the pop-up menu, select Canon
MXxxx series in the list of printers, then click Add . *xxx refers
to the model number. MX340 series shown in example, below
12
Registering the Printer & Scanner
Step Two (cont)
2-B
Step Three
When the Register Printer and Scanner screen appears, click
Register Scanner.
4. Make sure that the Canon MXxxx series is added to the
list of printers.
*xxx refers to the model number. MX340 series shown in
above example.
13
Registering the Printer & Scanner
Step Four
Step Five
Select Canon MXxxx series on the Scan-from-PC Settings
screen, then click OK.. *xxx refers to the model number.
Click Next on the Register Printer and Scanner screen.
14
Registering the Printer & Scanner
Step Six
Step Seven
Click Next on the Print Head Alignment Recommended
Click Next on the Register Printer and Scanner screen.
screen.
15
Registering the Printer & Scanner
Step Eight
If the User Registration screen appears, read the information
and click Next or Cancel.
If the Extended Survey Program screen appears: If you can
agree to Extended Survey Program, click Agree. If you click Do
not agree, the Extended Survey Program will not be installed.
(This has no effect on the machine's functionality.).
16
Registering the Printer & Scanner
Step Nine
Click Exit. Setup is complete
*It is necessary to restart the computer before scanning using the
Operation Panel on the machine for the first time.
17
|