Impex Home Gym IGS 2110 User Manual

NOTE:  
Please read all instructions  
carefully before using this  
product  
Iron Grip Strength  
POWER TOWER  
IGS-2110  
Safety Notice  
Hardware Identifier  
Assembly Instruction  
Parts List  
Warranty  
Ordering Parts  
Model  
IGS-2110  
Retain This  
Manual for  
Reference  
06-29-06  
OWNER'S  
MANUAL  
IMPEX INC.  
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746  
Tel: (800) 999-8899 Fax: (626) 961-9966  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY NOTICE  
PRECAUTIONS  
This exercise machine is built for optimum safety. However, certain precautions apply  
whenever you operate a piece of exercise equipment. Be sure to read the entire manual  
before you assemble or operate your machine. In particular, note the following safety  
precautions:  
1. Keep children and pets away from the machine at all times. DO NOT  
leave children unattended in the same room with the machine.  
2. Only one person at a time should use the machine.  
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal  
symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.  
4. Position the machine on a clear, leveled surface. DO NOT use the machine  
near water or outdoors.  
5. Keep hands away from all moving parts.  
6. Always wear appropriate workout clothing when exercising. DO NOT wear  
robes or other clothing that could become caught in the machine. Running  
or aerobic shoes are also required when using the machine.  
7. Use the machine only for its intended use as described in this manual. DO  
NOT use attachments not recommended by the manufacturer.  
8. Do not place any sharp object around the machine.  
9. Disabled person should not use the machine without a qualified person or  
physician in attendance.  
10. Before using the machine to exercise, always do stretching exercises to  
properly warm up.  
11. Never operate the machine if the machine is not functioning properly.  
CARE AND MAINTENANCE  
1. Inspect and tighten all parts before using the machine.  
2. The machine can be cleaned using a damp cloth and mild non-abrasive detergent.  
DO NOT use solvents.  
3. Maximum User’s Weight: 300 lbs.  
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR  
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE  
AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL  
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT.  
IMPEX INC.  
ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY  
DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.  
SAVE THESE INSTRUCTIONS.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING LABEL REPLACEMENT  
The Warning Label shown here has been placed on the Base Frame. If the label is missing or illegible,  
please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
HARDWARE PACK  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY INSTRUCTION  
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches  
NOTE: It is strongly recommended two or more people assembling this machine to avoid  
possible injury.  
STEP 1 (See Diagram 1)  
A.) Connect the Left and Right Base Frame (#1 & #2) with the Stabilizer (#3) in the mid-span.  
Secure each end with two M10 x 2 ¾” Carriage Bolts (#19), ¾” Washers (#17), and M10  
Aircraft Nuts (#18). Do NOT tighten the Nuts and Bolts yet.  
B.) Attach a Lower Upright Beam (#5) onto the Right Stabilizer (#2). Secure it with two M10 x 2 ¾”  
Carriage Bolts (#19), one 5 ½” Bracket (#12), two ¾” Washers (#17), and two M10 Aircraft  
Nuts (#18). Repeat the same procedure to install the other side. NOTE: Do NOT tighten all  
the nuts and bolts yet.  
DIAGRAM 1  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 2 (See Diagram 2)  
A.) Attach a Diagonal Support (#4) to the Lower Upright Beam (#5) and the Right Base  
Frame (#2). Secure it to the Lower Upright Beam with two M10 x 3” Carriage Bolts  
(#20), Ø 1 ¼” Bent Washers (#22), and M10 Aircraft Nuts (#18). Secure it to the  
Right Base Frame with two M10 x 2 ¾” Carriage Bolts (#19), one 4 ¾” Bracket  
(#13), two Ø ¾” Washers (#17), and two M10 Aircraft Nuts (#18).  
B.) Attach a Dip Support (#9) to the Lower Upright Beam. Align the holes and secure  
them with two M10 x 3 1/8” Carriage Bolts (#21), one Curve Bracket (#11), and two  
M10 Aircraft Nuts (#18). Repeat the same stop to install the other side.  
C.) Attach two Upper Upright Beams (#6) onto the Lower Upright Beams (#5).  
D.) Connect the two Upright Beams with a Cross Brace (#7) in the middle. Secure each  
side with two M10 x 3” Carriage Bolts (#20), 1 ¼” Bent Washers (#22) and M10  
Aircraft Nuts (#18). Do NOT tighten all the Nuts and Bolts yet.  
E.) Attach a Vertical Handle (#8) to the Dip Support. Secure it with one M10 x 1” Allen  
Bolt (#31) and Ø ¾” Bent Washer (#24). Repeat to install the other side.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIAGRAM 2  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 3 (See Diagram 3)  
A.) Attach the Chin-up Bar (#10) to the top opening on the two Upper Upright Beams.  
Secure the Chin-up Bar to each opening with one M8 x 1 5/8” Allen Bolt (#27) and Ø ½”  
Bent Washer (#34). Cover each opening with an Upright Beam End Cap (#30).  
B.) Attach the two Arm Pads (#15) onto the Dip Supports. Secure each Arm Pad with two  
M8 x 2 ½” Allen Bolts (#16) and Ø 5/8” Bent Washers (#26).  
C.) Attach the Backrest Board (#14) to the Cross Brace (#7). Secure it with two M8 x ¾”  
Allen Bolts (#29) and Ø 5/8” Washers (#28).  
D.) Securely tighten all Nuts and Bolts previously installed.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLODED DIAGRAM  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts list  
KEY NO.  
DESCRIPTION  
Q’ty  
1
2
3
4
5
6
7
8
Left Base Frame  
Right Base Frame  
Stabilizer  
Diagonal Support  
Lower Upright Beam  
Upper Upright Beam  
Cross Brace  
Vertical Handle  
Dip Support  
Chin-up Bar  
Curve Bracket  
5 ½” Bracket  
4 ¾” Bracket  
Backrest Board  
Arm Pad  
1
1
1
2
2
2
1
2
2
1
2
2
2
1
2
4
12  
24  
12  
8
4
8
4
2
2
4
2
2
2
2
2
4
2
2
2
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
M8 x 2 ½” Allen Bolt  
Ø ¾” Washer  
M10 Aircraft Nut  
M10 x 2 ¾” Carriage Bolt  
M10 x 3” Carriage Bolt  
M10 x 3 1/8” Carriage Bolt  
Ø 1 ¼” Bent Washer  
2” Base Frame End Cap  
Ø ¾” Bent Washer  
Ø 2” Sleeve  
Ø 5/8” Bent Washer  
M8 x 1 5/8” Allen Bolt  
Ø 5/8” Washer  
M8 x ¾” Allen Bolt  
Upright Beam End Cap  
M10 x 1” Allen Bolt  
6 ¾” Grip  
6” Grip  
Ø ½” Bent Washer  
5” Grip  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPEX INC.  
LIMITED WARRANTY  
IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under  
normal use and service conditions, for a period of two years on the Frame from the date of purchase. This  
warranty extends only to the original purchaser.  
replacing or repairing, at IMPEX's option.  
IMPEX's obligation under this Warranty is limited to  
All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer  
Service Department at 1-800-999-8899. All freights on products returned to IMPEX must be prepaid by the  
customer. This warranty does not extend to any product or damage to a product caused by or attributable to  
freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an IMPEX authorized  
service center or for products used for commercial or rental purposes. No other warranty beyond that  
specifically set forth above is authorized by IMPEX.  
IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in  
connection with the use or performance of the product or other damages with respect to any economic loss,  
loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other  
consequential damages or whatsoever natures. Some states do not allow the exclusion or limitation of  
incidental or consequential damages. Accordingly, the above limitation may not apply to you.  
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of  
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth  
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above  
limitation may not apply to you.  
This warranty gives you specific legal right. You may also have other rights which vary from state to state.  
IMPEX INC.  
14777 Don Julian  
City of Industry, CA 91746  
ORDERING REPLACEMENT PARTS  
Replacement parts can be ordered by calling our Customer Service Department toll-free at 1-800-999-8899  
during our regular business hours: Monday through Friday, 9 am until 5 pm Pacific standard time.  
When ordering replacement parts, always give the following information.  
1. Model  
2. Description of Parts  
3. Part Number  
4. Date of Purchase  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Cordless Saw w1702 User Manual
Grizzly Saw G0728 User Manual
Harbor Freight Tools Nail Gun 44923 User Manual
Hayter Mowers Lawn Mower 48ST User Manual
Heatiator Indoor Fireplace CH76 User Manual
Hotpoint Refrigerator FFUL 1913 P User Manual
HP Hewlett Packard Personal Computer B5P10UT#ABA User Manual
Humminbird Fish Finder LCR 3004 User Manual
Husky Pressure Washer HU80520 User Manual
IBM Computer Monitor 6736 HB0 User Manual