Image Treadmill IMTL496060 User Manual

Model No. IMTL49606.0  
Serial No.  
USER'S MANUAL  
Serial Number  
Decal  
QUESTIONS?  
As a manufacturer, we are com-  
mitted to providing complete  
customer satisfaction. If you  
have questions, or if parts are  
damaged or missing, PLEASE  
CONTACT OUR CUSTOMER  
SERVICE DEPARTMENT  
DIRECTLY.  
CALL TOLL-FREE:  
1-800-753-4645  
Mon.–Fri. 6 a.m.–6 p.m. MST  
Sat. 8 a.m.–5 p.m. MST  
ON THE WEB:  
CAUTION  
Visit our website at  
Read all precautions and instruc-  
tions in this manual before using  
this equipment. Save this manual  
for future reference.  
new products, prizes,  
fitness tips, and much more!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT PRECAUTIONS  
WARNING:  
To reduce the risk of burns, fire, electric shock, or injury to persons, read the  
following important precautions and information before operating the treadmill.  
1. It is the responsibility of the owner to ensure  
that all users of this treadmill are adequately  
informed of all warnings and precautions.  
page 12. To purchase a surge suppressor, see  
your local IMAGE dealer or call the toll-free  
telephone number on the front cover of this  
manual and order part number 146148, or see  
your local electronics store.  
2. Use the treadmill only as described.  
3. Place the treadmill on a level surface, with at  
least eight feet of clearance behind it and two  
feet on each side. Do not place the treadmill  
on any surface that blocks air openings. To  
protect the floor or carpet from damage, place  
a mat under the treadmill.  
12. Failure to use a properly functioning surge  
suppressor could result in damage to the con-  
trol system of the treadmill. If the control sys-  
tem is damaged, the walking belt may change  
speed, accelerate, or stop unexpectedly,  
which may result in a fall and serious injury.  
4. Keep the treadmill indoors, away from mois-  
ture and dust. Do not put the treadmill in a  
garage or covered patio, or near water.  
13. Keep the power cord and the surge suppres-  
sor away from heated surfaces.  
14. Never move the walking belt while the power  
is turned off. Do not operate the treadmill if  
the power cord or plug is damaged, or if the  
treadmill is not working properly. (See TROU-  
BLESHOOTING on page 21 if the treadmill is  
not working properly.)  
5. Do not operate the treadmill where aerosol  
products are used or where oxygen is being  
administered.  
6. Keep children under the age of 12 and pets  
away from the treadmill at all times.  
15. Read, understand, and test the emergency  
stop procedure before using the treadmill (see  
HOW TO TURN ON THE POWER on page 13).  
7. The treadmill should be used only by persons  
weighing 275 pounds or less.  
8. Never allow more than one person on the  
treadmill at a time.  
16. Never start the treadmill while you are stand-  
ing on the walking belt. Always hold the  
handrails while using the treadmill.  
9. Wear appropriate exercise clothes when  
using the treadmill. Do not wear loose clothes  
that could become caught in the treadmill.  
Athletic support clothes are recommended for  
both men and women. Always wear athletic  
shoes. Never use the treadmill with bare feet,  
wearing only stockings, or in sandals.  
17. The treadmill is capable of high speeds.  
Adjust the speed in small increments to avoid  
sudden jumps in speed.  
18. Never leave the treadmill unattended while it  
is running. Always remove the key and unplug  
the power cord when the treadmill is not in  
use.  
10. When connecting the power cord (see page 12),  
plug the power cord into a surge suppressor  
(not included) and plug the surge suppressor  
into a grounded circuit capable of carrying 15  
or more amps. No other appliance should be on  
the same circuit. Do not use an extension cord.  
19. The pulse sensor is not a medical device.  
Various factors, including the user's move-  
ment, may affect the accuracy of heart rate  
readings. The pulse sensor is intended only  
as an exercise aid in determining heart rate  
trends in general.  
11. Use only a single-outlet surge suppressor that  
meets all of the specifications described on  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
20. Do not attempt to raise, lower, or move the  
treadmill until it is properly assembled. (See  
ASSEMBLY on page 6, and HOW TO FOLD  
AND MOVE THE TREADMILL on page 20.)  
You must be able to safely lift 45 pounds (20  
kg) to raise, lower, or move the treadmill.  
24.  
DANGER:  
Always unplug the power  
cord immediately after use, before cleaning  
the treadmill, and before performing the  
maintenance and adjustment procedures de-  
scribed in this manual. Never remove the  
motor hood unless instructed to do so by an  
authorized service representative. Servicing  
other than the procedures in this manual  
should be performed by an authorized ser-  
vice representative only.  
21. When folding or moving the treadmill, make  
sure that the storage latch is fully closed.  
22. Inspect and properly tighten all parts of the  
treadmill regularly.  
25. This treadmill is intended for in-home use  
only. Do not use this treadmill in a commer-  
cial, rental, or institutional setting.  
23. Never insert any object into any opening.  
WARNING:  
Before beginning this or any exercise program, consult your physician. This  
is especially important for persons over the age of 35 or persons with pre-existing health problems.  
Read all instructions before using. ICON assumes no responsibility for personal injury or property  
damage sustained by or through the use of this product.  
SAVE THESE INSTRUCTIONS  
The decals shown here have been placed on the treadmill. If a decal is missing, or if  
it is not legible, call the toll-free telephone number on the front cover of this manual  
and order a free replacement decal. Apply the decal in the location shown. Note:  
The decals are not shown at actual size.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU BEGIN  
Thank you for selecting the new IMAGE® 17.5 S tread-  
mill. The 17.5 S treadmill combines advanced technol-  
ogy with innovative design to help you get the most from  
your exercise in the convenience of your home. And  
when you’re not exercising, the 17.5 S treadmill can be  
folded up, requiring less than half the floor space of  
other treadmills.  
number and serial number before calling. The model  
number of the treadmill is IMTL49606.0. The serial  
number can be found on a decal attached to the tread-  
mill (see the front cover of this manual for the location).  
To avoid a registration fee for any service needed  
under warranty, you must register the treadmill at  
For your benefit, read this manual carefully before  
using the treadmill. If you have questions after read-  
ing this manual, please see the front cover of this man-  
ual. To help us assist you, note the product model  
Before reading further, please review the drawing  
below and familiarize yourself with the labeled parts.  
Fan  
Accessory Tray  
Console  
Handrail  
Key/Clip  
Upright  
Storage Latch  
Reset/Off  
Circuit Breaker  
Walking Belt  
Foot Rail  
Power Cord  
Cushioned Walking Platform  
for maximum exercise comfort  
BACK  
RIGHT SIDE  
Rear Roller  
Adjustment Bolts  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly  
requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the  
packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with  
high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or to the  
shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top  
of the walking belt, wipe it off with a soft cloth and mild, non-abrasive cleaner.  
Assembly requires the included hex keys  
mallet , adjustable wrench  
and your own phillips screwdriver  
, and needlenose pliers  
, rubber  
.
To identify assembly hardware, see the drawings below. The number in parentheses below each drawing is the  
key number of the part, from the PART LIST in the center of the manual. The number following the parentheses  
is the quantity used in assembly. To avoid damaging plastic parts, do not use power tools for assembly.  
3/4" Screw (2)–10  
1 1/2" Screw (A)–4  
Wheel Nut (35)–2  
Silver Ground  
Screw (11)–2  
1/4” Star Washer  
(21)–2  
Nut (47)–2  
Upright Bolt (27)–4  
Handrail Star  
Washer (19)–4  
Wheel Bolt (14)–2  
Frame Washer  
(33)–2  
Console  
Bolt (22)–2  
Frame Bolt (32)–2  
Upright Star  
Washer (39)–4  
Wheel Spacer  
(44)–4  
Handrail Bolt (20)–4  
1. Attach a Wheel (45) to one side of the Base (48)  
with a Wheel Bolt (14), two Wheel Spacers (44),  
and a Wheel Nut (35) as shown. Do not over-  
tighten the Wheel Nut; the Wheel should turn  
freely.  
1
45  
A
45  
44  
44  
Hole  
37  
37  
A
35  
37  
Attach the other Wheel (45) to the other side  
of the Base (48) in the same way.  
48  
14  
Hole  
Attach the four Base Pads (37) to the Base (48)  
with four 1 1/2” Screws (A); make sure that the  
screws are in the indicated holes in the Base.  
A
Hole  
A
Hole  
37  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Have a second person orient the Base (48) as  
shown.  
2
Identify the Left Upright (31), which has a large  
hole near the bend as shown.  
Bend  
31  
Orient the Left Upright (31) as shown, and attach  
it to the Base (48) with two Upright Bolts (27) and  
two Upright Star Washers (39); do not tighten  
the Upright Bolts yet.  
39  
39  
27  
48  
Large Hole  
27  
3. Orient the Right Upright (36) as shown, and at-  
tach it to the Base (48) with two Upright Bolts  
(27) and two Upright Star Washers (39); do not  
tighten the Upright Bolts yet.  
3
48  
Bend  
39  
36  
27  
39  
4. Set the Base (48) near the front of the treadmill,  
with the Power Cord (13) on the Hood (1) as  
shown.  
4
36  
36  
13  
Cut the small tie (not shown) holding the Upright  
Wire (28) in a bundle.  
Strap  
Wrap the strap around the Upright Wire (28) and  
secure the strap using the included plastic tie.  
Then, pull the opposite end of the strap until the  
end of the Upright Wire is pulled through the  
Right Upright (36).  
28  
Tie  
28  
48  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. See the left inset drawing. Identify the two Frame  
Spacers (34). Open the included packet of  
grease, and apply grease to both sides of both  
Frame Spacers. Then, identify the outer side of  
each Frame Spacer.  
5
36  
91  
47  
34  
Next, hold a Frame Spacer (34) between the  
Right Upright (36) and the Lift Frame (59), with  
the outer side of the Frame Spacer facing the  
Right Upright. Attach the Right Upright to the  
Lift Frame with a Frame Bolt (32), a Frame  
Washer (33), and a Nut (47); do not tighten the  
Frame Bolt yet.  
33  
59  
Then, identify the Right Base Cover (91). Slide  
the Right Base Cover onto the Right Upright (36)  
and turn it to the position shown.  
32  
36  
28  
Pull gently on the upper end of the Upright Wire  
(28) to remove any excess slack.  
34  
47  
Outer  
Side  
Cut the plastic tie and remove the strap from the  
Upright Wire (28).  
33  
32  
Inner  
Side  
34  
59  
6. See the left inset drawing. Identify the outer side  
of the remaining Frame Spacer (34).  
6
90  
Hold the Frame Spacer (34) between the Left  
Upright (31) and the Lift Frame (59), with the  
outer side of the Frame Spacer facing the  
Left Upright. Attach the Left Upright to the Lift  
Frame with a Frame Bolt (32), a Frame Washer  
(33), and a Nut (47); do not tighten the Frame  
Bolt yet.  
31  
47  
34  
33  
Identify the Left Base Cover (90). Slide the Left  
Base Cover onto the Left Upright (31) and turn it  
to the position shown.  
59  
32  
34  
31  
47  
Outer  
Side  
33  
32  
Inner  
Side  
34  
59  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Set the console assembly face down on a soft  
surface to avoid scratching it. Hold a Handrail  
(18) near the console assembly.  
7
Console  
Wire  
Next, insert the console wire into the hole in the  
bottom of the Handrail (18) and out of the indi-  
cated square hole. If necessary, grip the con-  
nector with needlenose pliers only in the area  
indicated by the arrow (see the inset drawing.)  
Then, attach the ground wire to the Handrail with  
a Silver Ground Screw (11).  
22  
18  
21  
2
Square  
Hole  
Ground  
Wire  
11  
Next, set the Handrail (18) on the console as-  
sembly. Make sure that no wires are pinched.  
Finger tighten a Console Bolt (22) with a 1/4”  
Star Washer (21) into the Handrail, and then  
start two 3/4” Screws (2) into the Handrail.  
Tighten the Console Bolt and then the two  
Screws; do not overtighten the Screws.  
Console  
Assembly  
Attach the other Handrail (not shown) to the con-  
sole assembly in the same way. Note: There are  
no wires on the other side.  
8. Insert the Upright Wire (28) through a Handrail  
Spacer (88) as shown. Attach the Handrail  
Spacer to the Right Upright (36) with a 3/4”  
Screw (2). Remove the stap and tie from the  
Upright Wire.  
8
88  
2
Attach the other Handrail Spacer (not shown) to  
the Left Upright (not shown) as described above.  
Note: There is not a wire on the left side.  
28  
Tie  
36  
Strap  
9. While another person holds the Console Base  
(26) near the right Handrail (18), connect the  
console wire to the Upright Wire (28) as shown  
in the inset drawing. Important: If the connec-  
tors are oriented correctly, they will slide to-  
gether easily and snap into place. If the con-  
nectors are not oriented correctly, the con-  
sole may be damaged when the power is  
turned on. Insert the connectors into the Right  
Upright (36).  
9
18  
26  
Console Wire  
28  
36  
Attach the Console Base (26) to the Right  
Upright (36) and the Left Upright (not shown)  
with four Handrail Bolts (20) and four Handrail  
Star Washers (19) (only one side is shown).  
Start all four Handrail Bolts before tightening  
any of them.  
19  
20  
19  
20  
28  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Lower the Uprights (31, 36).  
10  
Side View  
32  
See the inset drawing. Position the Uprights (31,  
36) so that the treadmill Frame (74) is centered  
between the Uprights.  
27  
Firmly tighten the Upright Bolts (27) and the  
Frame Bolts (32) on each side of the treadmill.  
Do not overtighten the Frame Bolts.  
31, 36  
74  
View from Above  
36  
31  
74  
11. Raise the Uprights (31, 36).  
11  
Rotate the Left and Right Base Covers (90, 91)  
180°. Slide the Base Covers over the Base (48).  
If necessary, pull out on the sides of the Base  
Covers to fit them over the Wheel Bolts (14).  
31, 36  
90, 91  
14  
48  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. Attach the ground wire on the Upright Wire (28)  
to the indicated hole in the Base (48) with a  
Silver Ground Screw (11).  
12  
Grommet  
28  
36  
Then, press the indicated grommet into the Right  
Upright (36).  
2
Attach the Right Base Cover (91) to the Base  
(48) with two 3/4” Screws (2). Attach the Left  
Base Cover (not shown) in the same way.  
48  
Ground  
Wire  
Raise the Uprights (31, 36) to a vertical position.  
11  
2
91  
13. Press the Latch Sleeve (30) into the Left Upright  
(31).  
13  
31  
30  
89  
Remove the knob from the pin. Make sure that  
the collar and the spring are on the pin. Insert  
the pin into the Latch Sleeve (30) and the Left  
Upright (31). Press the Latch Insert (89) into the  
other side of the Left Upright, and then tighten  
the knob back onto the pin.  
Knob  
Spring  
Collar  
Remove the plastic packaging from the bottom of  
the Belly Pan.  
Pin  
14. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may  
be included. Keep the included hex keys in a secure place; the large hex key is used to adjust the walking belt  
(see page 22). To protect the floor or carpet, place a mat under the treadmill.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION AND ADJUSTMENT  
THE PRE-LUBRICATED WALKING BELT  
tric shock. This product is equipped with a cord having  
an equipment-grounding conductor and a grounding  
plug. Plug the power cord into a surge suppressor,  
and plug the surge suppressor into an appropriate  
outlet that is properly installed and grounded in  
accordance with all local codes and ordinances.  
Important: The treadmill is not compatible with  
GFCI-equipped outlets.  
Your treadmill features a walking belt coated with high-  
performance lubricant. IMPORTANT: Never apply sil-  
icone spray or other substances to the walking  
belt or the walking platform. Such substances will  
deteriorate the walking belt and cause excessive  
wear.  
HOW TO PLUG IN THE POWER CORD  
This product is for use on a nominal 120-volt circuit,  
and has a grounding plug that looks like the plug illus-  
trated in drawing 1 below. A temporary adapter that  
looks like the adapter illustrated in drawing 2 may be  
used to connect the surge suppressor to a 2-pole  
receptacle as shown in drawing 2 if a properly  
grounded outlet is not available.  
DANGER:  
Improper connection  
of the equipment-grounding conductor can  
result in an increased risk of electric shock.  
Check with a qualified electrician or service-  
man if you are in doubt as to whether the  
product is properly grounded. Do not modify  
the plug provided with the product—if it will  
not fit the outlet, have a proper outlet  
1
Grounded Outlet Box  
Surge Suppressor  
Grounding Pin  
installed by a qualified electrician.  
Your treadmill, like any other type of sophisticated  
electronic equipment, can be seriously damaged by  
sudden voltage changes in your home’s power.  
Voltage surges, spikes, and noise interference can  
result from weather conditions or from other appliances  
being turned on or off. To decrease the possibility of  
your treadmill being damaged, always use a surge  
suppressor with your treadmill (see drawing 1 at  
the right). To purchase a surge suppressor, see  
your local IMAGE dealer or call the toll-free tele-  
phone number on the front cover of this manual  
and order part number 146148, or see your local  
electronics store.  
Grounding Pin  
Grounded Outlet  
Grounding Plug  
2
Grounded Outlet Box  
Adapter  
Surge Suppressor  
Use only a single-outlet surge suppressor that is  
UL 1449 listed as a transient voltage surge sup-  
pressor (TVSS). The surge suppressor must have a  
UL suppressed voltage rating of 400 volts or less  
and a minimum surge dissipation of 450 joules.  
The surge suppressor must be electrically rated for  
120 volts AC and 15 amps. There must be a moni-  
toring light on the surge suppressor to indicate  
whether it is functioning properly. Failure to use a  
properly functioning surge suppressor could result  
in damage to the control system of the treadmill. If  
the control system is damaged, the walking belt  
may change speed, accelerate or stop unexpect-  
edly, which may result in a fall and serious injury.  
Lug  
Metal Screw  
The temporary adapter should be used only until a  
properly grounded outlet (drawing 1) can be installed  
by a qualified electrician.  
The green-colored rigid ear, lug, or the like extending  
from the adapter must be connected to a permanent  
ground such as a properly grounded outlet box cover.  
Whenever the adapter is used it must be held in place  
by a metal screw. Some 2-pole receptacle outlet box  
covers are not grounded. Contact a qualified elec-  
trician to determine if the outlet box cover is  
grounded before using an adapter.  
This product must be grounded. If it should malfunc-  
tion or break down, grounding provides a path of least  
resistance for electric current to reduce the risk of elec-  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONSOLE DIAGRAM  
Note: If there are sheets of clear plastic  
on the console, remove the plastic.  
Clip  
Key  
FEATURES OF THE CONSOLE  
Calorie Goal Programs  
The console also features four calorie goal programs.  
Each program controls the speed and incline of the  
treadmill to help you burn unwanted pounds.  
The treadmill console offers a selection of features  
designed to make your workouts more effective. When  
the manual mode of the console is selected, the speed  
and incline of the treadmill can be changed with the  
touch of a button. As you exercise, the console will  
display continuous exercise feedback. You can even  
measure your heart rate using the built-in pulse sensor.  
To use the manual mode of the console, follow the  
steps beginning on page 14. To use a distance pro-  
gram, see page 16. To use a step program, see  
page 17. To use a calorie goal program, see page  
18.  
Distance Goal Programs  
HOW TO TURN ON THE POWER  
In addition, the console offers two distance programs—  
the 5K program counts down from 5 kilometers as you  
complete a 5-kilometer run, and the 10K program  
counts down from 10 kilometers.  
Plug in the power cord (see  
page 12). Next, locate the  
Reset  
Position  
reset/off circuit breaker on  
the treadmill frame near the  
power cord. Make sure that  
the circuit breaker is in the  
“reset” position.  
Step Program  
Walking is one of the most popular exercises world-  
wide. Walking does not require advanced conditioning  
or special skills, yet it produces numerous benefits,  
such as increased calorie burning, a slimmer waist,  
toned muscles, enhanced energy and stamina, lower  
blood pressure, and reduced stress.  
Next, stand on the foot rails of the treadmill. Locate the  
clip attached to the key (see the drawing above), and  
slide the clip securely onto the waistband of your  
clothes. Then, insert the key into the console; after a  
moment, the display will light. Important: In an  
emergency situation, the key can be pulled from  
the console, causing the walking belt to slow to a  
stop. Test the clip by carefully taking a few steps  
backward; if the key is not pulled from the console,  
adjust the position of the clip.  
To track your walking exercise, the console features a  
new step program that counts the number of steps that  
you take during each workout. In addition, the console  
offers a step program that allows you to enter the num-  
ber of steps that you plan to walk, and counts down the  
steps as you exercise.  
More reliable than conventional pedometers, the tread-  
mill’s step program is highly accurate with most users.  
Note: To prevent damage to the walking platform,  
always wear clean shoes while using the treadmill.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To stop the walking belt, press the Stop button.  
The time will begin to flash in the display. To  
restart the walking belt, press the Start button, the  
Speed increase button, or one of the numbered  
speed buttons.  
HOW TO USE THE MANUAL MODE  
Insert the key into the console.  
1
See HOW TO TURN ON THE POWER on page  
13.  
Note: The first time you use the treadmill, periodi-  
cally inspect the alignment of the walking belt, and  
center it if necessary (see page 22).  
Enter your weight if desired.  
2
Change the incline of the treadmill as desired.  
For the most accurate  
5
6
calorie count, enter your  
weight into the console  
by pressing the Weight  
To change the incline of  
the treadmill, press the  
Incline increase and de-  
crease buttons or one of  
the numbered incline but-  
tons. Each time the  
Incline increase or decrease button is pressed,  
the incline will change by 0.5%. If one of the num-  
bered incline buttons is pressed, the treadmill will  
adjust to the selected incline setting. Note: After  
the buttons are pressed, it may take a moment for  
the treadmill to reach the selected incline setting.  
increase and decrease  
buttons repeatedly. Note:  
Once you have entered your weight, your weight  
will be saved in memory.  
Select the manual mode.  
3
When the  
key is in-  
serted, the  
manual  
mode will be  
selected. If  
Follow your progress with the display.  
Track  
When the  
manual mode  
you have se-  
lected a program, press the Calorie Goal  
Programs button repeatedly until a track appears  
in the display.  
is selected,  
the upper  
part of the  
display will  
show a track  
Track  
Start the walking belt.  
4
that represents 1/4 mile. As you walk or run, indi-  
cators will appear in succession around the track  
until the entire track appears. The track will then  
disappear and the indicators will again begin to ap-  
pear in succession.  
To start the walking belt, press the Start button,  
the Speed increase button, or one of the num-  
bered speed buttons.  
If the Start button or the Speed increase button is  
pressed, the walking belt will begin to move at 1  
mph. As you exercise, change the speed of the  
walking belt as desired by pressing the Speed in-  
crease and decrease buttons. Each time a button  
is pressed, the speed  
setting will change by  
0.1 mph; if a button is  
held down, the speed  
setting will change in in-  
The left side of the display  
will show the elapsed  
time, the distance that  
you have walked or run,  
and the incline level of the  
treadmill. Note: When a  
calorie goal program is selected, the display will  
show the time remaining in the program instead of  
the elapsed time.  
crements of 0.5 mph.  
The right side of the dis-  
play will show the ap-  
proximate number of  
calories you have  
burned, the speed of the  
walking belt, and your  
pace in minutes per mile. The right side of the dis-  
play will also show your heart rate when you use  
the handgrip pulse sensor.  
If one of the numbered speed buttons is pressed,  
the walking belt will gradually increase in speed  
until it reaches the selected speed setting. Note:  
The console can display speed and distance in  
either miles or kilometers (see THE INFORMA-  
TION MODE/DEMO MODE on page 19). For  
simplicity, all instructions in this section refer  
to miles.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: For the treadmill to count your steps accu-  
rately, correct walking form is important. As you  
walk, try to maintain a steady pace, a uniform  
stride length, and a consistent position on the  
treadmill. Lighter users may also find it helpful to  
reduce the incline of the treadmill or to increase  
the speed of the walking belt. IMPORTANT:  
Always exercise at a pace that is comfortable  
for you.  
Turn on the fan if desired.  
8
9
To turn on the fan at low speed, press the Fan  
button; the word “Low” will appear in the display.  
To turn on the fan at high speed, press the button  
a second time; the word “High” will appear in the  
display. To turn off the fan, press the button a third  
time; the word “Off” will appear in the display.  
Note: If the fan is left on when the walking belt is  
stopped, the fan will automatically turn off after a  
few minutes.  
To reset the display, press the Stop button, re-  
move the key, and then reinsert the key.  
When you are finished exercising, remove the  
key.  
Measure your heart rate if desired.  
7
Before using  
the handgrip  
pulse sensor,  
remove the  
sheets of clear  
plastic from the  
metal contacts.  
In addition,  
make sure that  
your hands are clean.  
Step onto the foot rails, press the Stop button, and  
adjust the incline of the treadmill to the lowest  
setting. The incline must be at the lowest setting  
when the treadmill is folded to the storage posi-  
tion, or the treadmill will be damaged. Next, re-  
move the key from the console and put it in a se-  
cure place. Note: If the display remains lit after  
the key is removed, the console is in the  
“demo” mode. See page 19 and turn off the  
demo mode.  
Metal Contacts  
To measure your heart rate, stand on the foot  
rails and place your hands on the metal con-  
tacts—avoid moving your hands. When your  
pulse is detected, the heart symbol in the display  
will begin to flash each time your heart beats, one  
or two dashes will appear, and then your heart  
rate will be shown. For the most accurate heart  
rate reading, continue to hold the contacts for  
at least 15 seconds.  
When you are finished using the treadmill,  
switch the reset/off circuit breaker to the “off”  
position and unplug the power cord.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: To change the speed of the walking belt or  
the incline of the treadmill at any time during the  
program, press the Speed or Incline buttons.  
HOW TO USE A DISTANCE PROGRAM  
Insert the key into the console.  
1
The left side of the display will show the number  
of kilometers still to be run every few seconds.  
See HOW TO TURN ON THE POWER on page  
13.  
To stop the program at any time, press the Stop  
button. The time will begin to flash in the display.  
To restart the program, press the Start button. The  
walking belt will begin to move at 1 mph. Adjust  
the speed of the walking belt as desired by press-  
ing the Speed increase or decrease button or one  
of the numbered Speed buttons.  
Select a distance program.  
2
To select a  
distance pro-  
gram, press  
the Distance  
Goal  
Programs  
button once  
or twice until  
a distance  
goal of 5.000 or 10.00 (kilometers) appears in the  
left side of the display. When a distance program  
is selected, the maximum speed setting of the  
program will flash in the right side of the display  
for a few seconds and the maximum incline set-  
ting of the program will appear in the left side of  
the display.  
When you have completed a 5-kilometer run or a  
10-kilometer run, your total time and the word  
“cool” (meaning cool down) will appear in the left  
side of the display. If the speed of the walking belt  
was greater than 5 mph when you completed your  
run, the walking belt will then slow to 5 mph for  
one minute. After one minute, the walking belt will  
slow to 4 mph for 2 minutes. The walking belt will  
then slow to 3 mph for 2 minutes. The walking belt  
will then slow to a stop.  
Follow your progress with the display.  
See step 6 on pages 14 and 15.  
Measure your heart rate if desired.  
See step 7 on page 15.  
4
5
6
7
Press the Start button to start the program.  
3
A moment after the button is pressed, the walking  
belt will begin to move at 3 mph. Hold the  
handrails and begin walking.  
Near the end of the second minute of the pro-  
gram, the speed setting will flash in the display  
and a series of tones will sound. The speed of the  
walking belt will then increase to 4 mph.  
Turn on the fan if desired.  
See step 8 on page 15.  
When you are finished exercising, remove the  
key from the console.  
Near the end of the third minute of the program,  
the speed setting will flash in the display and a se-  
ries of tones will sound. The speed of the walking  
belt will then increase to 5 mph.  
See step 9 on page 15.  
Near the end of the fourth minute of the program,  
the speed setting will flash in the display and a se-  
ries of tones will sound. The speed of the walking  
belt will then increase to 6.5 mph.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the Start button or the Speed increase  
button to start the program.  
HOW TO USE A STEP PROGRAM  
3
Insert the key into the console.  
A moment after the button is pressed, the walking  
belt will begin to move at 2 mph. Hold the  
handrails and begin walking.  
1
See HOW TO TURN ON THE POWER on page  
13.  
As you exercise, adjust the speed and incline of  
the treadmill as desired by pressing the Speed  
and Incline buttons.  
Select a step program.  
2
To select a  
During the program, the upper display will show  
the number of steps still to be taken. When only  
ten steps remain, the upper left of the display will  
flash and a tone will sound repeatedly until you  
reach the goal. The walking belt will then slow to a  
stop.  
step pro-  
gram, press  
the 10,000  
Steps  
Program but-  
ton or the  
Goal in-  
crease but-  
To stop the program temporarily, press the Stop  
button. The time will begin to flash in the display.  
To restart the program, press the Start button or  
the Speed increase button. The walking belt will  
begin to move at 2 mph. To end the program,  
press the Stop button, remove the key, and then  
reinsert the key.  
ton; if you press the 10,000 Steps Program but-  
ton, a goal of 10,000 steps will appear in the  
upper display. Note: If the walking belt is moving  
when the 10,000 Steps Program button is  
pressed, the walking belt will slow to a stop.  
Depending on your fitness level, you may desire  
to walk fewer than or more than 10,000 steps. To  
change the goal, press the Goal increase and de-  
crease buttons. Each time a button is pressed, the  
goal will change by 500 steps. Note: The goal can  
be changed either before or after the program is  
started.  
Follow your progress with the display.  
See step 6 on pages 14 and 15.  
Measure your heart rate if desired.  
See step 7 on page 15.  
4
5
6
7
Note: To find an appropriate starting goal, walk on  
the treadmill with the manual mode selected (see  
page 14), and note the number of steps that you  
walk during your workout. Then, round that num-  
ber up to the nearest 500 steps. This can be a  
starting goal. As your fitness level improves, you  
can increase the goal by 500 steps every few  
weeks. IMPORTANT: Always exercise at an in-  
tensity level and for a length of time that is  
comfortable for you.  
Turn on the fan if desired.  
See step 8 on page 15.  
When the program is completed, remove the  
key from the console.  
See step 9 on page 15.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When only three seconds remain in the first seg-  
ment of the program, both the Current Segment  
column and the column to the right will flash and a  
series of tones will sound. If the speed and/or in-  
cline of the treadmill is about to change, the speed  
setting and/or the incline setting will flash in the  
display to alert you.  
HOW TO USE A CALORIE GOAL PROGRAM  
Insert the key into the console.  
1
See HOW TO TURN ON THE POWER on page 13.  
Enter your weight.  
2
When the first segment is completed, all speed  
settings will move one column to the left. The  
speed setting for the second segment will then be  
shown in the flashing Current Segment column  
and the treadmill will automatically adjust to the  
speed and incline settings for the second seg-  
ment. Note: If all seven of the indicators in the  
Current Segment column are lit, the speed settings  
may move downward so that only the highest indi-  
cators appear in the matrix.  
See step 2 on page 14. Note: Always enter your  
weight before using a calorie goal program;  
the speed and incline settings of the program  
will depend on the weight setting you enter.  
Select a calorie goal program.  
3
To select a  
calorie goal  
program,  
press the  
Calorie Goal  
Programs  
button re-  
peatedly. As  
each calorie  
If the speed or incline setting for the current seg-  
ment is too high or too low, you can manually  
override the setting by pressing the Speed and  
Incline buttons. Every few times a Speed button is  
pressed, an additional indicator will appear or dis-  
appear in the Current Segment column.  
goal program is selected, the maximum speed  
setting of the program and the maximum incline  
setting of the program will flash in the display for a  
few seconds and the display will show how long  
the program will last. A profile of the speed set-  
tings of the program will scroll across the display.  
Important: When the current segment of the  
program ends, the treadmill will automatically  
adjust to the speed and incline settings for the  
next segment.  
To stop the program at any time, press the Stop  
button. To restart the program, press the Start but-  
ton or the Speed increase button. The walking belt  
will begin to move at 1 mph. When the next seg-  
ment of the program begins, the treadmill will auto-  
matically adjust to the speed and incline settings  
for that segment.  
Press the Start button to start the program.  
4
A moment after the button is pressed, the tread-  
mill will automatically adjust to the first speed and  
incline settings of the program. Hold the handrails  
and begin walking.  
The program will continue in this way until the last  
segment of the program ends. The walking belt  
will then slow to a stop. Important: The calorie  
goal is an estimate of the number of calories  
that you will burn during the program. The ac-  
tual number of calories that you burn will de-  
pend on your weight. In addition, if you manu-  
ally change the speed or incline of treadmill  
during the program, the number of calories  
you burn will be affected.  
Each program is divided into 30 or 40 one-minute  
segments. One speed setting and one incline set-  
ting are programmed for each segment. Note: The  
same speed and/or incline setting may be pro-  
grammed for two or more consecutive segments.  
The speed  
setting for  
the first seg-  
ment will be  
shown in the  
flashing  
Current Segment  
Current  
Segment column of the matrix. (The incline set-  
tings are not shown in the matrix.) The speed set-  
tings for the following segments will be shown in  
the columns to the right.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE INFORMATION MODE  
Follow your progress with the display.  
See step 6 on pages 14 and 15.  
Measure your heart rate if desired.  
See step 7 on page 15.  
5
6
7
8
The console features an information mode that keeps  
track of treadmill usage information. The information  
mode also allows you to select miles or kilometers as  
the unit of measurement and to turn on and turn off the  
demo mode.  
To select the information mode, hold down the Stop  
button, insert the key into the console, and then release  
the Stop button. When the information mode is se-  
lected, the following information will appear in the dis-  
play:  
Turn on the fan if desired.  
See step 8 on page 15.  
When the program is completed, remove the  
key from the console.  
The upper display  
will show the total  
number of thou-  
See step 9 on page 15.  
sands of steps  
taken by all users  
of the treadmill.  
For example, the  
number 316 would indicate 316,000 steps taken.  
The center of the  
display will show  
the number of  
hours that the  
treadmill has been  
operated. The  
lower right corner  
of the display will show the total number of miles or kilo-  
meters that the walking belt has moved.  
In addition, an “E” for English miles or an “M” for metric  
kilometers will appear in the right side of the display. To  
change the unit of measurement, press the Speed in-  
crease button.  
IMPORTANT: If a “d” appears in the display, the con-  
sole is in the “demo” mode. This mode is intended to be  
used only when the treadmill is displayed in a store.  
When the console is in the demo mode, the power cord  
can be plugged in, the key can be removed from the  
console, and the indicators in the display will automati-  
cally appear in a preset sequence; the buttons on the  
console will not operate. If a “d” appears when the in-  
formation mode is selected, press the Speed de-  
crease button so the “d” disappears.  
Note: If you press the Calorie Goal Programs button  
while in the information mode, the display may appear  
very dim, very dark, or blank. If this happens, press the  
Calorie Goal Programs button repeatedly until the dis-  
play looks right.  
To exit the information mode, remove the key from the  
console.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO FOLD AND MOVE THE TREADMILL  
HOW TO FOLD THE TREADMILL FOR STORAGE  
Before folding the treadmill, adjust the incline to the  
lowest position. If this is not done, the treadmill may be per-  
manently damaged. Next, unplug the power cord. CAUTION:  
You must be able to safely lift 45 pounds (20 kg) to raise,  
lower, or move the treadmill.  
1. Hold the metal frame firmly in the location shown by the  
arrow at the right. CAUTION: To decrease the possibility  
of injury, do not lift the frame by the plastic foot rails. To  
raise the frame, bend your legs, keep your back straight,  
and lift with your legs. Raise the frame about halfway to the  
vertical position.  
Frame  
2. Move your right hand to the position shown and hold the  
treadmill firmly. Using your left hand, pull the latch knob to  
the left and hold it. Raise the frame until the catch passes the  
pin on the latch knob, and then slowly release the latch knob.  
Make sure that the pin is resting securely against the  
catch.  
To protect the floor or carpet from damage, place a mat  
under the treadmill. Keep the treadmill out of direct sun-  
light. Do not leave the treadmill in the storage position in  
temperatures above 85° Fahrenheit.  
Latch  
Knob  
Engaged  
Catch  
HOW TO MOVE THE TREADMILL  
Deck  
Before moving the treadmill, convert it to the storage position as  
described above. Make sure that the pin on the latch knob is  
resting securely against the catch.  
Handrail  
1. Hold one of the handrails and place your other hand on the  
deck. Place one foot against one of the wheels.  
2. Tilt the treadmill back until it rolls freely on the wheels. Carefully  
move the treadmill to the desired location. To reduce the risk  
of injury, use extreme caution while moving the treadmill.  
Do not move the treadmill over an uneven surface.  
3. Place one foot against one of the wheels, and carefully lower  
the treadmill until it is resting in the storage position.  
Wheel  
HOW TO LOWER THE TREADMILL FOR USE  
1. Hold the upper end of the treadmill with your left hand. Pull the latch knob to the left and hold it. Pivot the  
frame downward and then release the latch knob.  
2. Hold the metal frame firmly with both hands, and lower it to the floor. CAUTION: To decrease the possibility  
of injury, do not lower the frame by gripping only the plastic foot rails. Do not drop the frame to the floor.  
Make sure to bend your legs and keep your back straight.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and  
follow the steps listed. If further assistance is needed, please see the front cover of this manual.  
PROBLEM: The power does not turn on  
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor  
is plugged into a properly grounded outlet (see page 12). Use only a single-outlet surge suppres-  
sor that meets all of the specifications described on page 12. Important: The treadmill is not com-  
patible with GFCI-equipped outlets.  
b. After the power cord has been plugged in, make sure that the key is inserted into the console.  
c. Check the reset/off circuit breaker located on the  
c
treadmill frame near the power cord. If the switch  
protrudes as shown, the circuit breaker has tripped.  
To reset the circuit breaker, wait for five minutes  
and then press the switch back in.  
Tripped  
Reset  
PROBLEM: The power turns off during use  
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see the drawing  
above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.  
b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for  
five minutes, and then plug it back in.  
c. Remove the key from the console. Reinsert the key into the console.  
d. If the treadmill still will not run, please see the front cover of this manual.  
PROBLEM: The displays of the console do not function properly  
SOLUTION: a. Remove the key from the console and UNPLUG THE  
a
2
POWER CORD. Remove the two Foot Rail Screws  
(4) and the two 3/4” Hood Screws (2) and carefully re-  
move the Hood (1).  
4
1
4
Locate the Reed Switch (63) and the Magnet (67) on  
the left side of the Pulley (64). Turn the Pulley until  
the Magnet is aligned with the Reed Switch. Make  
sure that the gap between the Magnet and the  
Reed Switch is about 1/8". If necessary, loosen the  
Screw (11), move the Reed Switch slightly, and then  
retighten the Screw. Reattach the Hood (not shown),  
and run the treadmill for a few minutes to check for a  
correct speed reading.  
1/8"  
11  
64  
67  
63  
Top  
View  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROBLEM: The walking belt slows when walked on  
SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 12.  
b. If the walking belt is overtightened, treadmill perfor-  
b
mance may decrease and the walking belt may be-  
come damaged. Remove the key and UNPLUG THE  
2"–3"  
POWER CORD. Using the hex key, turn both rear  
roller bolts counterclockwise, 1/4 of a turn. When the  
walking belt is properly tightened, you should be able  
to lift each edge of the walking belt 2 to 3 inches off  
the walking platform. Be careful to keep the walking  
belt centered. Then, plug in the power cord, insert the  
Rear Roller Bolts  
key, and run the treadmill for a few minutes. Repeat  
until the walking belt is properly tightened.  
c. If the walking belt still slows when walked on, please see the front cover of this manual.  
PROBLEM: The walking belt is off-center or slips when walked on  
SOLUTION: a. If the walking belt is off-center, first remove the key  
a
and UNPLUG THE POWER CORD. If the walking  
belt has shifted to the left, use the hex key to turn  
the left rear roller bolt clockwise 1/2 of a turn; if the  
walking belt has shifted to the right, turn the left  
bolt counterclockwise 1/2 of a turn. Be careful not to  
overtighten the walking belt. Then, plug in the power  
cord, insert the key, and run the treadmill for a few  
minutes. Repeat until the walking belt is centered.  
b. If the walking belt slips when walked on, first remove  
b
the key and UNPLUG THE POWER CORD. Using  
the hex key, turn both rear roller bolts clockwise, 1/4  
of a turn. When the walking belt is correctly tightened,  
you should be able to lift each edge of the walking  
belt 2 to 3 inches off the walking platform. Be careful  
to keep the walking belt centered. Then, plug in the  
power cord, insert the key, and carefully walk on the  
treadmill for a few minutes. Repeat until the walking  
belt is properly tightened.  
PROBLEM: No exercise information appears in the console display when the power is turned on and the  
key is inserted in the console.  
SOLUTION: a. Remove the key from the console. Press the Stop button while reinserting the key into the con-  
sole. Then, press the Calorie Goal Programs button. Exercise information should now appear in  
the console display.  
b. If there is still no text in the console display, please see the front cover of this manual.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONDITIONING GUIDELINES  
is to burn fat, adjust the speed and incline of the tread-  
mill until your heart rate is near the lowest number in  
your training zone.  
WARNING:  
Before beginning this  
or any exercise program, consult your physi-  
cian. This is especially important for individu-  
als over the age of 35 or individuals with pre-  
existing health problems.  
For maximum fat burning, adjust the speed and incline  
of the treadmill until your heart rate is near the middle  
number in your training zone.  
The pulse sensor is not a medical device.  
Various factors, including your movement,  
may affect the accuracy of heart rate readings.  
The sensor is intended only as an exercise aid  
in determining heart rate trends in general.  
Aerobic Exercise  
If your goal is to strengthen your cardiovascular sys-  
tem, your exercise must be “aerobic.” Aerobic exercise  
is activity that requires large amounts of oxygen for  
prolonged periods of time. This increases the demand  
on the heart to pump blood to the muscles, and on the  
lungs to oxygenate the blood. For aerobic exercise,  
adjust the speed and incline of the treadmill until your  
heart rate is near the highest number in your training  
zone.  
The following guidelines will help you to plan your ex-  
ercise program. For more detailed exercise informa-  
tion, obtain a reputable book or consult your physician.  
EXERCISE INTENSITY  
WORKOUT GUIDELINES  
Whether your goal is to burn fat or to strengthen your  
cardiovascular system, the key to achieving the  
desired results is to exercise with the proper intensity.  
The proper intensity level can be found by using your  
heart rate as a guide. The chart below shows recom-  
mended heart rates for fat burning and aerobic exercise.  
Each workout should include the following three parts:  
A Warm-up—Start each workout with 5 to 10 minutes  
of stretching and light exercise. A proper warm-up in-  
creases your body temperature, heart rate and circula-  
tion in preparation for exercise.  
Training Zone Exercise—After warming up, increase  
the intensity of your exercise until your pulse is in your  
training zone for 20 to 60 minutes. (During the first few  
weeks of your exercise program, do not keep your  
pulse in your training zone for longer than 20 minutes.)  
Breathe regularly and deeply as you exercise—never  
hold your breath.  
To find the proper heart rate for you, first find your age  
near the bottom of the chart (ages are rounded off to  
the nearest ten years). Next, find the three numbers  
above your age. The three numbers define your “train-  
ing zone.” The lower two numbers are recommended  
heart rates for fat burning; the higher number is the  
recommended heart rate for aerobic exercise.  
A Cool-down—Finish each workout with 5 to 10 min-  
utes of stretching to cool down. This will increase the  
flexibility of your muscles and will help prevent post-  
exercise problems.  
EXERCISE FREQUENCY  
Fat Burning  
To maintain or improve your condition, complete three  
workouts each week, with at least one day of rest be-  
tween workouts. After a few months, you may com-  
plete up to five workouts each week if desired. The key  
to success is to make exercise a regular and enjoyable  
part of your everyday life.  
To burn fat effectively, you must exercise at a relatively  
low intensity level for a sustained period of time.  
During the first few minutes of exercise, your body  
uses easily accessible carbohydrate calories for en-  
ergy. Only after the first few minutes does your body  
begin to use stored fat calories for energy. If your goal  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART LIST—Model No. IMTL49606.0  
R0407A  
Key No. Qty.  
Description  
Key No. Qty.  
Description  
1
2
3
4
5
6
7
8
1
34  
1
8
2
2
11  
2
1
1
6
2
1
2
2
1
4
2
4
4
2
2
1
2
1
1
4
1
1
1
1
2
4
2
2
1
4
14  
5
1
2
1
1
4
2
3
4
1
3
1
1
2
Hood  
3/4" Screw  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
#
2
6
1
1
1
1
1
2
1
1
1
1
1
2
1
2
2
2
4
1
1
1
1
4
6
6
1
1
4
2
1
1
1
2
2
2
1
1
1
1
4
4
1
1
1
1
1
1
1
Lift Frame Bolt  
3/8" Nut  
Lift Motor  
Left Foot Rail  
Foot Rail Screw  
Motor Tension Bolt  
Motor Tension Washer  
Wire Tie  
Stop Bracket  
Incline Motor Bolt, Top  
Incline Motor Bolt, Bottom  
Lift Frame  
Motor Tension Nut  
Motor Belt  
Reed Switch  
Clip  
Front Roller/Pulley  
Motor Pivot Bolt  
Platform Bolt, Front  
Magnet  
Belt Guide  
Rear Roller Bracket  
Isolator  
Belt Guide Screw  
Walking Belt  
Walking Platform  
Frame  
Right Foot Rail  
Platform Nut  
Rear Roller Washer  
Platform Bolt, Rear  
Rear Roller  
Right Rear Foot  
Rear Roller Star Washer  
Rear Roller Bolt  
Left Rear Foot  
Ground Wire  
Motor Bolt  
Drive Motor  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
Motor Bracket  
Sliver Ground Screw  
Power Bracket Star Washer  
Power Cord Assembly  
Wheel Bolt  
Foot Rail Decal  
Console Fan Assembly  
Handrail Endcap  
Handrail  
Handrail Star Washer  
Handrail Bolt  
1/4" Star Washer  
Console Bolt  
Key/Clip  
Frame Pivot Spacer  
Console  
Console Base  
Upright Bolt  
Upright Wire  
Latch Pin Assembly  
Latch Sleeve  
Left Upright  
Frame Bolt  
Frame Washer  
Frame Spacer  
Wheel Nut  
Right Upright  
Base Pad  
3/4" Tek Screw  
Upright Star Washer  
5/32" Hex Key  
Caution Decal  
Console Support Bracket  
Warning Decal  
Wheel Spacer  
Wheel  
Hex Key  
Roller Bushing  
Handrail Spacer Screw  
Handrail Spacer  
Latch Insert  
Left Base Cover  
Right Base Cover  
Hood Cover  
Hood Cover Screw  
Isolator Fastener  
Reset/Off Circuit Breaker  
Catch  
4" Black Wire, M/F  
8" Green Wire, F/R  
8" Blue Wire, 2F  
4" Red Wire, M/F  
User’s Manual  
Incline Motor Nut, Top  
Nut  
Base  
Plastic Tie  
Belly Pan  
#
#
#
#
Controller  
Upright Endcap  
#These parts are not illustrated  
Specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPLODED DRAWING—Model No. IMTL49606.0  
R0407A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO ORDER REPLACEMENT PARTS  
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to  
provide the following information:  
• the MODEL NUMBER of the product (IMTL49606.0)  
• the NAME of the product (IMAGE 17.5 S treadmill)  
• the SERIAL NUMBER of the product (see the front cover of this manual)  
• the KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the EXPLODED DRAWING and PART LIST  
attached in the center of this manual)  
LIMITED WARRANTY  
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and  
material, under normal use and service conditions. The drive motor is warranted for five (5) years after  
the date of purchase. Parts and labor are warranted for ninety (90) days after the date of purchase.  
This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to  
replacing or repairing, at ICON's option, the product through one of its authorized service centers. All re-  
pairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped to a  
service center, freight charges to and from the service center will be the customer’s responsibility. For in-  
home service, the customer will be responsible for a minimal trip charge. This warranty does not extend  
to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, im-  
proper or abnormal usage or repairs not provided by an ICON authorized service center; to products  
used for commercial or rental purposes; or to products used as store display models. No other warranty  
beyond that specifically set forth above is authorized by ICON.  
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-  
nection with the use or performance of the product or damages with respect to any economic loss, loss  
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other  
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of in-  
cidental or consequential damages. Accordingly, the above limitation may not apply to you.  
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of  
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set  
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the  
above limitation may not apply to you.  
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.  
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813  
Part No. 244084 R0407A  
Printed in USA © 2007 ICON IP, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Gravely Snow Blower 210E+05 User Manual
Grundig Flat Panel Television 32 VLE 8130 BL User Manual
Hans Grohe Plumbing Product Metris C 31003xx 1 User Manual
Hasbro Games Upwords User Manual
Honeywell Home Security System 400 User Manual
Honeywell Home Security System 800 06894 User Manual
HP Hewlett Packard Computer Drive StorageWorks Modular Smart Array 500 System User Manual
IBM Printer Bertl User Manual
Ice O Matic Ice Maker EMF 450 Series User Manual
Ikelite Digital Camera SD 750 User Manual