IDEAL 5009-1
IDEAL 5009-2
Modular conveyor belt system
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
1. General ....................................................... 4
1.1 Safety Instructions ...................................... 4
1.2 Application................................................... 4
2. Installation ................................................... 5
2.1 Transport ..................................................... 5
2.2 Preparing for installation ............................. 6
Waste cart ................................................... 6
Conveyor belt (Accessory) .......................... 6
2.3 Power supply............................................... 8
2.4 Checking rotating direction ......................... 8
When the machine works in the opposite
direction....................................................... 8
3. Operation .................................................... 9
3.1 Operating elements..................................... 9
3.2 Starting the machine ................................... 9
Stopping the machine ............................... 10
Yellow pilot light flashes ............................ 10
3.3 Stopping the machine ............................... 10
For short breaks ........................................ 10
For longer breaks ...................................... 10
3.4 Replacing the plastic bag .......................... 11
3.5 Oiling the shredding mechanism............... 11
4. Trouble shooting ....................................... 12
5. Accessories ............................................... 14
6. Technical data ........................................... 14
7. EC-declaration of conformity..................... 15
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IDEAL 5009-1 • IDEAL 5009-2
1. General
This instruction manual is meant to help you to
operate the machine easily and safely. Please read
these operating instructions before putting the
machine into operation and observe the safety
regulations.
1.1 Safety Instructions ꢀ
Danger!
Non-compliance with the instructions may
endanger persons.
ꢀ
Warning!
Non-compliance with the instructions may
cause damage to the machine.
The operating instructions must always be
available for the operator.
1.2 Application
The machine is constructed to shred paper, flat or
crumpled, as well as cardboard boxes including
staples. Data security is not guaranteed when
shredding single sheets of paper. Access to the
cutting mechanism is prevented by a grid.
Danger!
The machine may only be operated by
qualified persons.
Do not let children operate the machine.
Danger!
When the main switch is switched on do not
use steps or anything similar when operating
or repairing the machine.
Danger!
Do not shred materials which may loop, liquids
or materials which may explode, chemically
react or splinter.
ꢀ
Warning!
Do not feed large steel components, screws,
nails or hard materials. This will damage the
shredding mechanism.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation
The machine is mobile on castors. The machine
must be installed on a sturdy, dry and level floor.
Danger!
- The machine must not be used outside.
- Do not use in the vicinity of flammable liquids
or gases.
- Do not use in wet environments.
- Protect the power cable from extreme heat,
oil, and sharp edges.
ꢀ
Warning!
- Do not cover the ventilation slits © see
picture left.
- Consider the floor loading.
Weight approx. 1200 kg.
15-01
2.1 Transport
ꢀ
Warning!
Do not lift the machine more than necessary
© risk of tipping.
2
1
ꢀ
Warning!
The transport safety device (1) and (2) must
be mounted when the machine is transported
lengthwise. The machine must be transported
from the rear. It is not necessary to mount the
safety device when the machine is transported
from the side.
- Make sure the pallet-jack is centred under the
machine.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IDEAL 5009-1 • IDEAL 5009-2
2.2 Preparing for installation
- Open the door.
- Remove the transport safety device (1) and keep
for later use.
1
- Mount the supporting screws (3).
- Screw down the supporting screws until the rear
castors are balanced.
Waste cart
- Put the plastic bag into the waste cart as
described under “replace bag“.
- Push the cart into the machine, with the open side
facing you, until it touches the buffer.
- Close the door.
Conveyor belt (accessory)
When using a conveyor belt the following
modifications must be made on the machine:
- Remove the transport safety device (2) for the
waste cart.
2
6
Download from Www.Somanuals.com. All Manuals Search And Download.
- Remove the springs from the ball-ends (4) on
both sides.
- Dismount the tie-bar (5).
4
5
- Push the slide to the back
31-01
- Push back the conveyor belt into the machine.
- Turn both handles to lock.
33-01
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IDEAL 5009-1 • IDEAL 5009-2
2.3 Power supply
The rating plate is located at the rear of the
machine.
- Data stated on the rating plate
- Voltage “V“,
- Frequency “Hz“,
- Power consumption “A“ must correspond to the
values of the power supply unit.
- Earth wire must be available.
- Connect the machine to the mains.
2.4 Checking rotating direction
Operate the machine for a short time as described
under 3. “Operation“.
- The material is transported to the shredding
mechanism by a feeding belt.
Feeding belt runs in the opposite direction.
The machine is wired according to the UEC rotary
field standard. When changing the rotary direction
we recommend that this is performed by an
experienced specialist. The rotary direction may
also be changed by exchanging the “L1“ and “L2“
connections in the plug.
06-01
Danger!
Incorrect exchanging of connections may
endanger the operator. If in doubt, this work
should be performed by an electrical specialist.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Operation
Danger!
- When the main switch is switched on do not
use steps or anything similar when operating
or repairing the machine.
- The machine may only be operated by
persons who have read and understood the
operating instructions.
- Do not reach into the running shredding
mechanism! The shredding mechanism
may cause serious injury!
- The machine will only operate when the door
to the machine and the safety grid are
closed.
3.1 Operating elements
(1) Start / black button
(2) Stop light for “door open“ and “
grid open“ / white button
(3) Reverse switch and light showing “bag full“
(4) Key switch
(5) Standby / green light
8
5
6
7
(6) Main switch
(7) Temperature indicator / yellow pilot light
(8) Emergency off
1
4
2
3
3.2 Starting the machine
Danger!
15
Do not shred any material which may loop or
splinter. Material not caught by the shredding
mechanism must be pushed with the pusher
(11). In case of danger, press emergency off
button (8).
11
8
- Main switch (6) to position “I“.
- Emergency button (8) must be unlocked.
- Grid (15) must be closed.
- Turn key switch (4) to the right
© standby (5) illuminates.
- Press and release the black button (1)
© conveyor belt is running.
15
- Distribute the paper over the whole width of the
feeding belt.
- The grid (15) can be lifted to remove jammed
paper.
32-01
9
Download from Www.Somanuals.com. All Manuals Search And Download.
IDEAL 5009-1 • IDEAL 5009-2
When large amounts of paper are inserted the
machine automatically adjusts to a more powerful,
slower capacity. If this capacity is still not powerful
enough the machine will reverse shortly and then
return to the forwards mode. This is repeated until
all material is completely destroyed.
ꢀ
Warning!
If possible let the machine work at its normal
speed. Shred continous paper only in stacks.
7
8
Stopping the machine
- Press the white button (2) or emergency off (8).
Keep hands away from running shredding
mechanism.
2
05-02
Yellow pilot light (7) flashes
7
Motor is overheated fi reduce the amount of
material on the feeding belt so that the machine
runs at the standard speed.
3.3 Stopping the machine
6
For short breaks
- Press and release the white button (2) © Fee-
ding belt stops.
9
For longer breaks
4
2
- Turn main switch (6) to position “0“ © the entire
machine shuts down.
- Turn the key switch (4) and remove the key
© now the machine is secured from
unauthorised use.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Replacing the plastic bag
Replace bag when “bag full“ indicator illuminates.
- Open the door (10).
- Pull out the waste cart.
- Remove the round belt (12) from the waste bag
frame.
- Pull the bag onto a pallet.
10
12
- Tie the bag (for sealing parts and binding wires
see accessories).
- Place a new bag into the bag frame and turn the
edge over approx. 40 cm to the outside of the
frame.
- Fasten the bag with the round belt.
- Push the cart into the machine, with the open side
facing you, until it touches the buffer.
- Close the door.
- Check the function of the door switch:
Start the machine. If the door is opened the
machine must stop immediately.
26-01
3.5 Oiling the shredding mechanism
13
14
If the sheet capacity reduces or after “bag full“ we
recommend that you oil the shredding mechanism.
- Press the oil pump lever (13) once
- After lubrication let the machine run several times
backwards and forwards alternately.
- If the tank (14) is empty refill with oil. Type of oil:
environmentally friendly cutting oil – see
accessories.
06-06
11
Download from Www.Somanuals.com. All Manuals Search And Download.
IDEAL 5009-1 • IDEAL 5009-2
4. Trouble shooting
Danger!
Disconnect from the mains before starting any
service work or before removing the cover.
Malfunction:
Standby (5) is not lighting up.
5
Cause:
- Main switch is OFF
7
- Emergency button is pressed.
- Key switch is vertical.
- Machine is not plugged in.
- On-site fuse.
9
2
- Motor protection switch from the
conveyor belt (9) operates.
- Machine is overloaded – The motor
protection switch is re-activated after
10 minutes.
Malfunction:
White light (2) illuminates, standby (5) is not
lighting up.
Cause:
- Door is open.
- Grid is open.
- Conveyor belt (accessory) is not locked.
Malfunction:
Machine door is difficult to open.
Cause:
Guiding bar of the lower cutting head cover is
dirty
Remedy:
Clean and grease the guiding bar. Do not use
grease or oil containing resin.
Malfunction:
Motor hums and has no power.
Cause:
One phase is missing.
Remedy:
Ensure that voltage is on all 3 phases.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Malfunction:
Machine switches off during normal operation.
Cause:
Indicator for “bag full“ or “shred bag full“
illuminates.
5
Remedy:
Renew plastic bag.
7
Cause:
Yellow pilot light (7) illuminates, machine is
overheated.
9
2
Remedy:
Wait approx. 10 to 20 minutes for the machine to
cool down. Start afresh.
Cause:
Yellow pilot light (7) illuminates, green light (5) is
out. Conveyor belt is overloaded.
Remedy:
Press the motor protection switch (9) after approx.
5 minutes.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
IDEAL 5009-1 • IDEAL 5009-2
5. Accessories
Plastic bags 350l (50 pieces) ................ 9000 414
Environmentally friendly oil 10 x 0,2 l .... 9000 610
Module conveyor belt system
(conveyor belt) ...................................... 9000 595
Pusher................................................... 9000 593
For fastening plastic bags:
Wire twisting tool................................... 9000 591
Wire ties (1000 pieces) ........................ 9000 597
9000 595
ꢀ Warning!
Only use manufacturer recommended accessories.
9000 593
6. Technical data
Sound level 75 dB(A).
Minimal space requirement = approx.
W = 2,3 m x D = 4,2 m
Version 1
Weight approx. 1000 kg.
Fuse protection on:
9000 591
9000 597
400V 50/60Hz with 16A.
200V / 50/60 Hz with 50A
230V / 50/60 Hz with 50A
Version 2
Weight approx. 1200 kg.
Fuse protection on:
400V 50/60Hz with 32A.
200V / 50/60 Hz with 100A
230V / 50/60 Hz with 100A
If you have further questions please contact your
dealer or directly on the internet
WWW
Service
@krug-priester.com
Subject to alterations without notice.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EG-KONFORMITÄTSERKLÄRUNG
EC-declaration of conformity
Déclaration de conformité CE
Declaración CE de conformidad
Dichiarazione CE di conformità
EG-verklaring van overeenstemming
Declaraçao CE de conformidade
EF-overensstemmelseserklæring
- Hiermit erklären wir, daß die Bauart von
- Herewith we declare that
- Par la présente, nous déclarons que
- Por la presente, declaramos que la
- Si dichiara che il modello della
- Hiermede verklaren wij, dat de in de handel gebrachte machine
- Com a presente, declaramos que o modelo da
- Hermed erklæres, at produkttypen
5009-1; 7050-1;
5009-2; 7050-2;
- folgenden einschlägigen Bestimmungen entspricht:
- complies with the following provisons applying to it:
- sont conformes aux dispositions pertinentes suivantes:
- satisface las disposiciones pertinentes siguientes:
- è conforme alle seguenti disposizioni pertinenti:
- voldoet aan de eisen van de in het vervolg genoemde bepalingen:
- está em conformidade com as disposições pertinentes, a saber:
- er i overensstemmelse med følgende bestemmelser:
EG 98/37; EG 73/23; EG 89/336
- Angewendete harmonisierte Normen insbesondere
- Applied harmonized standards in particular
- Normes harmonisée utilisées, notamment
- Normas armonizadas utilizadas particularmente
- Norme armonizzate applicate in particolare
- Gebruikte geharmoniseerde normen, in het bijzondere
- Normas harmonizadas utilizadas, em particular
- Harmoniserede standarder, der blev anvendt, i særdaleshed
EN60204-1; EN55014-1; EN55014-2
EN292; EN294; EN27779
Krug & Priester GmbH u. Co KG
72336 Balingen, Germany
21. 3. 2003
Datum
Wolfgang Priester
- General Manager -
15
Download from Www.Somanuals.com. All Manuals Search And Download.
IDEAL 5009-1 • IDEAL 5009-2
IDEAL Krug & Priester
72336 Balingen Germany
1
Download from Www.Somanuals.com. All Manuals Search And Download.
|