|
MQSeries® for AS/400®
IBM
Quick Beginnings
V5.1
GC34-5557-00
Download from Www.Somanuals.com. All Manuals Search And Download.
MQSeries® for AS/400®
IBM
Quick Beginnings
V5.1
GC34-5557-00
Download from Www.Somanuals.com. All Manuals Search And Download.
Note!
Before using this information and the product it supports, be sure to read the general information under
First edition (March 2000)
This edition applies to MQSeries for AS/ 400, Version 5 Release 1, and to all subsequent releases and modifications
until otherwise indicated in new editions.
© Copyright International Business Machines Corporation 2000. All rights reserved.
US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract
with IBM Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
© Copyright IBM Corp. 2000
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
iv MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
v
Download from Www.Somanuals.com. All Manuals Search And Download.
vi MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
viii MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to MQSeries for AS/400
This book describes IBM® MQSeries for AS/ 400, Version 5.1. It explains how
to plan for, install, and begin to use the product. For latest information about
MQSeries for AS/ 400, V5.1, refer also to the readme file on the publications
CD-ROM, and to the MQSeries family Web site at:
http://www.ibm.com/software/ts/mqseries/
Conventions
Knowing the conventions used in this book will help you use it more
efficiently.
v Boldface type indicates the name of an item you need to select.
v Italic type indicates new terms, book titles, or variable information that you
must replace with actual values.
v Monospace type indicates an example (such as a fictitious path or file name)
or text that is displayed on the screen.
© Copyright IBM Corp. 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
ix
Conventions
x
MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. About MQSeries
This chapter introduces IBM MQSeries and describes its relationship with
other products. It contains basic explanations of the following topics:
For more detailed explanations of these topics see the MQSeries Planning
Guide.
Message Queuing
MQSeries enables applications to use message queuing to participate in
message-driven processing. Applications can communicate across different
platforms by using the appropriate message-queuing software products. The
applications are shielded from the mechanics of the underlying
communications.
MQI – a Common Application Programming Interface
All MQSeries products implement a common application programming
interface (message queue interface or MQI), regardless of the platform on
which the applications are run. The calls made by the applications and the
messages they exchange are common. This makes it much easier to write and
maintain applications than it is when using traditional methods. It also makes
it easier to port applications from one platform to another.
The MQI is described in detail in the MQSeries Application Programming
Reference book.
© Copyright IBM Corp. 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Message Queuing
Time-Independent Applications
With message queuing, the exchange of messages between the sending and
receiving programs is time independent. This means that the sending and
receiving applications are decoupled; the sender can continue processing
without having to wait for the receiver to acknowledge receipt of the message.
In fact, the target application does not even have to be running when the
message is sent. It can retrieve the message when it starts running.
Message-Driven Processing
On arrival on a queue, messages can automatically start an application by
using a technique known as triggering. If necessary, the application can be
stopped when the message or messages have been processed.
Messages and Queues
Messages and queues are the basic components of a message queuing system.
What is a Message?
A message is a string of bytes that has meaning to the applications that use it.
Messages are used to transfer information from one application to another (or
to different parts of the same application). The applications can be running on
the same platform, or on different platforms.
MQSeries messages have two parts; the application data and a message
descriptor. The content and structure of the application data are defined by the
application programs that use the data. The message descriptor identifies the
message and contains control information, such as the type of message and
the priority assigned to it by the sending application.
2
MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages and Queues
What is a Queue?
A queue is a data structure that stores messages. The messages may be put on
the queue by applications or by a queue manager as part of its normal
operation.
Queues exist independently of the applications that use them. A queue can
exist in main storage (if it is temporary), on disk or similar auxiliary storage
(if it must be kept in case of recovery), or in both places (if it is currently
being used, and must also be kept for recovery). Each queue belongs to a
queue manager, which is responsible for maintaining it. The queue manager
puts the messages it receives onto the appropriate queue.
Queues can exist either in your local system, in which case they are called
local queues, or at another queue manager, in which case they are called remote
queues.
Applications use MQI calls to send and receive messages. One application can
put a message on a queue and another application can retrieve the message
from the same queue.
MQSeries Objects
An MQSeries object is a recoverable resource that is managed by MQSeries.
Many of the tasks that are described in this chapter involve manipulating the
following types of MQSeries object:
v Queue managers
v Queues
v Process definitions
v Channels
v Namelists
MQSeries creates default objects for you when you create a queue manager.
Each object has a name associated with it. You can specify that name in
MQSeries commands and MQI calls to refer to the object. Names must be
unique within each of the object types. For example, you can have a queue
and a process with the same name, but you cannot have two queues with the
same name.
Chapter 1. About MQSeries
Download from Www.Somanuals.com. All Manuals Search And Download.
3
MQSeries Objects
Queue Managers
A queue manager provides queuing services to applications, and manages the
queues that belong to it. It ensures that:
v Object attributes are changed according to the commands received.
v Special events such as trigger events or instrumentation events are
generated when the appropriate conditions are met.
v Messages are put on the correct queue, as requested by the application that
makes the MQPUT call. The application is informed if this cannot be done,
and an appropriate reason code is given.
Each queue belongs to a single queue manager and is said to be a local queue
to that queue manager. The queue manager to which an application is
connected is said to be the local queue manager for that application. For the
application, the queues that belong to its local queue manager are local
queues. A remote queue is simply a queue that belongs to another queue
manager. A remote queue manager is any queue manager other than the local
queue manager. A remote queue manager may exist on a remote machine
across the network, or it may exist on the same machine as the local queue
manager. MQSeries for AS/ 400, V5.1 supports multiple queue managers on
the same machine.
Queues
A queue is an MQSeries object that can store messages. Each queue has queue
attributes that determine what happens when applications reference the queue
in MQI calls. The attributes indicate:
v Whether applications can retrieve messages from the queue (get enabled)
v Whether applications can put messages onto the queue (put enabled)
v Whether access to the queue is exclusive to one application or shared
between applications
v The maximum number of messages that can be stored on the queue at the
same time (maximum queue depth)
v The maximum size of messages that can be put on the queue (maximum
message size)
4
MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
MQSeries Objects
Process Definitions
A process definition object defines an application that is to be started in response
to a trigger event on an MQSeries queue manager.
A trigger event is a logical combination of conditions that is detected by a
queue manager. For example, a trigger event may be generated when the
number of messages on a queue reaches a predefined level. This event causes
the queue manager to put a trigger message on a specified initiation queue.
This trigger message is retrieved by a trigger monitor, a special application that
monitors an initiation queue. The trigger monitor then starts up the
application program that was specified in the trigger message.
If a queue manager is to use triggering, at least one initiation queue must be
defined for that queue manager.
See the MQSeries Application Programming Guide for more information about
triggering.
Channels
A channel provides a communication path. There are two types of channel;
message channels and MQI channels.
A message channel provides a communication path between two queue
managers on the same, or different, platforms. The message channel is used
for the transmission of messages from one queue manager to another. It
shields the application programs from the complexities of the underlying
networking protocols.
A message channel can transmit messages in one direction only. If you require
two-way communication between two queue managers, you need two
message channels.
An MQI channel connects an MQSeries client to a queue manager on a server
machine. It is for the transfer of MQI calls (for example, MQPUT) and
responses only and is bidirectional. A channel definition exists for each end of
the link. On some platforms, some types of MQI channel can be defined
automatically.
For more information about channels see the MQSeries Intercommunication
book.
Chapter 1. About MQSeries
Download from Www.Somanuals.com. All Manuals Search And Download.
5
MQSeries Objects
Namelists
A namelist is an MQSeries object that contains a list of other MQSeries objects.
Typically, namelists are used by applications such as trigger monitors, where
they are used to list a number of queues. The advantage of using a namelist is
that it is maintained independently of applications. You can update a namelist
without having to stop any of the applications that use it. Also, if one
application fails, the namelist is not affected and other applications can
continue using it.
Clients and Servers
MQSeries supports client/ server configurations for MQSeries applications.
An MQSeries client is a part of the MQSeries product, which is used to accept
MQI calls from an application and pass them to an MQI server machine. The
calls are processed by a queue manager on the server machine. Typically, the
client and server reside on different machines, but equally they may exist on
the same machine.
An MQI server is a queue manager that provides queuing services to one or
more clients. All the MQSeries objects, for example queues, exist only on the
queue manager machine, that is, on the MQI server machine. A server can
support local MQSeries applications as well.
The benefits of using an MQSeries client include:
v Reduced hardware requirements.
v Reduced system administration requirements.
v Small installation footprint.
v Alternative channels using different transmission protocols may be used.
For more information about clients, client support, and creating channels for
clients and servers, see the MQSeries Clients book.
6
MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Instrumentation Events
Instrumentation Events
You can use MQSeries instrumentation events to monitor the operation of
queue managers.
Instrumentation events cause special messages, which are called event
messages, to be generated whenever the queue manager detects a predefined
set of conditions. For example, the following conditions give rise to a Queue
Full event:
v Queue Full events are enabled for a specified queue, and
v An application issues an MQPUT call to put a message on that queue, but
the call fails because the queue is full.
Other conditions that can give rise to instrumentation events include:
v A predefined limit for the number of messages on a queue being reached
v A queue not being serviced within a specified time
v A channel instance being started or stopped
If you define your event queues as remote queues, you can put all the event
queues on a single queue manager (for those nodes that support
instrumentation events). You can then use the events that are generated to
monitor a network of queue managers from a single node.
Types of Event
MQSeries events are categorized as follows:
Queue manager events
These events are related to the definitions of resources within queue
managers. For example, if an application attempts to open a queue
but the associated user ID is not authorized to perform that operation,
a queue manager event is generated.
Performance events
These events are notifications that a resource has reached a threshold
condition. For example, a queue has reached its queue-depth limit
following an MQGET request, or a queue has not been serviced
within a predefined period of time.
Channel events
These events are reported by channels as a result of conditions they
detect during their operation. For example, a channel event is
generated when a channel instance is stopped.
Chapter 1. About MQSeries
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Transactional Support
Transactional Support
An application program can group a set of updates into a unit of work. These
updates are usually logically related and must all be successful for data
integrity to be preserved. If one update succeeded while another failed then
data integrity would be lost.
A unit of work commits when it completes successfully. At this point all
updates made within that unit of work are made permanent or irreversible. If
the unit of work fails, all updates are instead backed out. Syncpoint coordination
is the process by which units of work are either committed or backed out
with integrity.
A local unit of work is one in which the only resources updated are those
belonging to the MQSeries queue manager. Syncpoint coordination is
provided by the queue manager itself, using a single-phase commit process.
A global unit of work is one in which resources that belong to other resource
managers, such as a DB2/ 400® database, are also updated. Here, a two-phase
commit procedure must be used and the unit of work is coordinated
externally by the operating system commitment controller.
Global units of work make it possible to integrate database updates within
MQSeries units of work. That is, you can write an application that makes
updates to MQSeries queues and to databases. You can issue commands to
commit or roll back the changes to both the queues and the databases.
This is achieved using a two-phase commit protocol. When a unit of work is
to be committed, the operating-system commitment controller first asks each
resource owner whether it is prepared to commit its updates. Only if the
database manager and the queue manager are both prepared to commit, are
all of the queue and database updates committed. If the database manager
cannot prepare its updates, the unit of work is backed out instead.
Full recovery support is provided if the queue manager loses contact with the
database manager during the commit process. If the database manager
becomes unavailable while it is in doubt (that is, it has been called to prepare
but the commitment controller has yet to receive a commit or backout
decision) the commitment controller remembers the outcome of the unit of
work until it has been successfully delivered. Similarly, if the queue manager
terminates with incomplete commit operations outstanding, these are
remembered over queue-manager restart.
8
MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. What’s New in MQSeries for AS/400, V5.1
MQSeries for AS/ 400, V5.1 is an update to MQSeries for AS/ 400, V4.2.1.
However, it is more than just an upgrade to the features of that product. It
includes significant new function and a redesign of the product base, to bring
MQSeries for AS/ 400 to the same level of function as other version 5.1
products. MQSeries for AS/ 400, V5.1 now offers platform consistency with the
other products at the 5.1 level, which are:
v MQSeries for AIX®
v MQSeries for OS/ 2®
v MQSeries for HP-UX
v MQSeries for Sun Solaris
v MQSeries for Windows NT®
The features of this release include:
MQSeries queue manager clusters
You can connect MQSeries queue managers to form a cluster. Within a
cluster, queue managers can make the queues they host available to
every other queue manager. Any queue manager can send a message
to any other queue manager in the same cluster without the need for
explicit channel definitions, remote queue definitions, or transmission
queues for each destination. The main benefits of MQSeries clusters
are:
v Fewer system administration tasks
v Increased availability
v Workload balancing
Clusters are supported by all MQSeries Version 5.1 products, and also
by MQSeries for OS/ 390®, Version 2.1.
See the MQSeries Queue Manager Clusters book for a complete
description.
MQSeries Administration Interface (MQAI)
The MQSeries Administration Interface is an MQSeries programming
interface that simplifies manipulation of MQSeries PCF messages for
administrative tasks. It is described in the MQSeries Administration
Interface Programming Guide and Reference book.
Support for Windows 98 clients
You can connect a Windows 98 client to the MQSeries for AS/ 400,
V5.1 server.
© Copyright IBM Corp. 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
9
What’s New
Java support
MQSeries classes for Java™ include support for MQSeries for AS/ 400,
V5.1.
New calls
MQSeries for AS/ 400, V5.1 supports the following new calls:
v MQCONNX, which allows you to specify queue-manager
connection options.
v MQCMIT, MQBACK, and MQBEGIN, which allow MQSeries to
coordinate a local unit of work.
Two-phase commit
MQSeries for AS/ 400, V5.1 participates as a two-phase commit
resource in global units of work (UOW) managed by OS/ 400®.
Automatic object creation
MQSeries for AS/ 400, V5.1 creates default objects automatically when
you create a queue manager.
Conversion of the EBCDIC new-line character
You can control the conversion of EBCDIC new-line characters. Thus
you can ensure that data transmitted between EBCDIC systems and
ASCII systems is unaltered by the ASCII conversion.
Multiple queue managers
MQSeries for AS/ 400 now supports multiple queue managers. You
can nominate one queue manager to be the default queue manager.
You can perform actions on a default queue manager without
specifying its name on the commands.
Job priority control
Users can set independent priority for individual MQSeries jobs - for
example, channel agents.
MQSeries subsystem
MQSeries for AS/ 400, V5.1 has its own subsystem. Previous releases
used QSYSWRK.
Euro support
MQSeries supports new and changed code pages that use the euro
currency symbol. Further details of code pages that include the euro
symbol are provided in the MQSeries Application Programming Reference
book.
Multithreaded channels
MQSeries for AS/ 400, V5.1 supports multithreaded channels.
Multithreaded applications
MQSeries for AS/ 400, V5.1 supports multithreaded applications.
10 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s New
Message queue size
A message queue can be up to 2 GB.
Message size
A single message can be up to 100 MB.
Administration application
The administration application is not supported in MQSeries for
AS/ 400, V5.1.
Chapter 2. What’s New in MQSeries for AS/ 400, V5.1 11
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s New
12 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Planning to Install the MQSeries for AS/400
Server
This chapter provides a summary of the requirements for running MQSeries
for AS/ 400. It discusses the network protocols and compilers supported, the
delivery media, and the various components of the product.
The information in this chapter applies to the server environment only. For
information about client environments, see “Chapter 6. Planning to Install
Hardware Requirements
MQSeries for AS/ 400, V5.1 runs on any machine that is capable of running
OS/ 400 V4R4, and that has sufficient storage to meet the combined
requirements of the programming prerequisites, MQSeries for AS/ 400, V5.1,
the access methods, and the application programs, whether from IBM or other
vendors.
The installation requirements depend on the components you install and how
much working space you need. This, in turn, depends on the number of
queues that you use, the number and size of the messages on the queues, and
whether the messages are persistent. You also require archiving capacity on
disk, tape, or other media.
Disk Space Required
For the MQSeries for AS/ 400, V5.1 base code and server you should allow
approximately 60 MB of storage.
Software Requirements
This is the minimum supported software level. Later levels, if any, will be
supported unless otherwise stated.
OS/ 400 Version 4 Release 4
Connectivity
The network protocols supported by MQSeries for AS/ 400 are:
v TCP
v SNA LU 6.2
© Copyright IBM Corp. 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Connectivity
AS/400 Install Libraries and Directories
MQSeries for AS/ 400 installs into the AS/ 400 library structure and also uses
directories in the IFS root file system.
AS/400 Library Structure
Installation of MQSeries for AS/ 400 creates the following libraries:
QMQM
The MQSeries base product library.
QMQMSAMP
The MQSeries samples library (if you choose to install the samples).
QMQM29xx
A library containing a message file that is specific to your national
language. This message file is automatically copied into the
appropriate QSYS29xx library when the product is installed.
The following language versions are available for MQSeries for AS/ 400, V5.1:
Table 1. National-language versions of MQSeries for AS/400, V5.1
Language ID
Language
2909
2966
2981
2950
2924
2938
2984
2928
2940
2932
2942
2931
2962
2986
2989
Belgian English
Belgian French MNCS (Multi-National Character Set)
Canadian French MNCS
English Uppercase
English Uppercase and Lowercase
English Uppercase DBCS (Double-Byte Character Set)
English Uppercase and Lowercase DBCS
French
French MNCS
Italian
Italian MNCS
Spanish
Japanese
Korean
Simplified Chinese
Note: The Japanese language version of this product does not run correctly if
your job CCSID is 5026. For details of supported CCSIDs to use with
this language version, see the readme file.
QMxxxx Library
Each time you create a queue manager MQSeries automatically creates an
associated library. This library contains objects specific to the queue manager,
including journals and associated receivers. The name of this library is
14 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Connectivity
derived from the name of the queue manager prefixed with the characters
QM. For example, for a queue manager called TEST, the library would be
called QMTEST.
You can use the WRKLIB command to list all the libraries that MQSeries for
AS/ 400 has created. Against the queue manager libraries, you will see the text
QMGR: QMGRNAME. The format of the command is:
WRKLIB LIB(QM*)
These queue manager-associated libraries are retained when the product is
deleted.
IFS Root File System
The integrated file system (IFS) provides a common interface to the different
systems on the AS/ 400. When you install MQSeries for AS/ 400, V5.1 two
directories are created in the root file system. They are:
/QIBM/ProdData/mqm
Subdirectories below this contain all the product data - for example,
C++ classes. Data in this directory is deleted and replaced each time
the product is installed.
/QIBM/UserData/mqm
Subdirectories below this contain all user data relating to queue
managers. Three subdirectories, / QIBM/ UserData/ mqm/ errors,
/ QIBM/ UserData/ mqm/ qmgrs, and / QIBM/ UserData/ mqm/ trace,
are also created when the product is installed.
When you install the product, an mqs.ini file is created in directory
/ QIBM/ UserData/ mqm/ (unless it is already there from a previous
installation). When you create a queue manager a qm.ini file is created
in the directory / QIBM/ UserData/ mqm/ qmgrs/ QMGRNAME/
(where QMGRNAME is the name of the queue manager.) The qm.ini
file is the equivalent of the QMINI file in previous releases of
MQSeries for AS/ 400.
Data in this directory is retained when the product is deleted.
The IFS file structure is shown in the MQSeries for AS/400 V5.1 System
Administration book.
Chapter 3. Planning to Install the MQSeries for AS/ 400 Server 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connectivity
User Profiles
When you install MQSeries for AS/ 400, V5.1, a number of user profiles are
created. These include QMQM, QMQMADM, and NOBODY. These three
objects are central to the correct running of MQSeries for AS/ 400. Under no
circumstances should you alter or delete them. If you do, IBM cannot
guarantee correct behavior of your product.
These profiles are retained when the product is deleted.
Compilers Supported for MQSeries for AS/400, V5.1 Applications
MQSeries for AS/ 400, V5.1 supports the following compilers:
v IBM ILE C for AS/ 400 compiler (5768-CX2)
v IBM ILE C++ for AS/ 400 compiler (5799-GDW)
v IBM VisualAge® for C++ for AS/ 400 compiler (5769-CX4)
v IBM ILE COBOL for AS/ 400 compiler Version 3 (5769-CB1)
v IBM ILE RPG for AS/ 400 compiler (5769-RG1)
v AS/ 400 Developer Kit for Java (5769-JV1)
Delivery
MQSeries for AS/ 400, V5.1 is supplied on CD-ROM.
There are three CD-ROMs.
v One contains the MQSeries for AS/ 400, V5.1 base product and sample
programs.
v Another contains the client products that you can use with MQSeries for
AS/ 400.
v The third contains MQSeries for AS/ 400 publications.
Java support is supplied on the MQSeries Web site, at:
http://www.ibm.com/software/ts/mqseries/
MQSeries for AS/400 Components
The components are as follows:
Base
Support to enable you to create and support your own applications.
This includes the run-time component that provides support for
external applications. It also includes support for client connections
from other MQSeries products.
16 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
MQSeries for AS/400 Components
Samples
Sample application programs. The source is supplied in the
QMQMSAMP library and executables are supplied in the QMQM
MQSeries online documentation
HTML and PDF versions of the books are supplied on the
publications CD-ROM. They are not installable. You can read them
directly from the CD-ROM or you can copy them to your system. For
example, you could copy them to your PC hard drive, or store them
in the AS/ 400 IFS and then access them using a network drive.
Each book is supplied in U.S. English and also in some or all of the
following national languages:
v French
v German
v Italian
v Japanese
v Korean
v Spanish
v Simplified Chinese
more information.
Readme file
Latest information about the product, which became available after
publication of this book. You can find the readme file on the
publications CD-ROM and should review it before starting to install
MQSeries for AS/ 400.
more information.
Creating the System-Default Objects
System-default objects are created automatically when you issue the
CRTMQM command to create a queue manager.
You can refresh them using the STRMQM command. Refer to the online help
for information about using this command.
Chapter 3. Planning to Install the MQSeries for AS/ 400 Server 17
Download from Www.Somanuals.com. All Manuals Search And Download.
18 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Installing, Migrating to, and Deleting MQSeries
for AS/400
This chapter describes installation of and migration to MQSeries for AS/ 400,
V5.1. It covers the following topics:
In addition to reading the information in this chapter, you should refer to the
readme file on the publications CD-ROM, and also to the latest information
available on the MQSeries Web site at:
http://www.ibm.com/software/ts/mqseries/
Before Installation
If you are migrating from an earlier release of MQSeries for AS/ 400, refer to
You must have the OS/ 400 V4R4 operating system installed on your machine
in order to run MQSeries for AS/ 400, V5.1. If you have OS/ 400 V4R2 or V4R3
operating system installed, you can use only MQSeries for AS/ 400 V4R2M1.
Setting System Values
Before installing MQSeries for AS/ 400, you should use the DSPSYSVAL
command to check that the following system values are set to the
requirements of your enterprise:
v QCCSID
v QUTCOFFSET
v QSYSLIBL
v QALWOBJRST
You can change these values, if necessary, using the CHGSYSVAL command.
© Copyright IBM Corp. 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Before Installation
QCCSID
Every message has a coded-character set identifier (CCSID) in its header. The
CCSID tag identifies the code page and character set of the source. For
CCSIDs that are supported on the AS/ 400 see the AS/400 National Language
Support book.
The CCSID information is obtained, when a queue manager is created, from
the job CCSID. If this does not contain a valid value in the range 1–65534, the
information is obtained from the default CCSID value for the job.
Note: The CCSID must be either Single-byte character set (SBCS), or Mixed,
that is SBCS and DBCS. It must not be DBCS only.
You can change the CCSID used by the MQSeries queue manager by using
QUTCOFFSET
You should check that the coordinated universal time offset (QUTCOFFSET)
system value has been set, to indicate the relationship between the system
time and Greenwich Mean Time (GMT). You do this by working with the
CHGSYSVAL command.
If QUTCOFFSET is not set, it takes the default value of zero. MQSeries for
AS/ 400 then assumes that the local system time is universal time coordinated
(UTC) - that is, GMT - and time stamps the MQSeries for AS/ 400 messages
accordingly.
QSYSLIBL
Ensure that QSYS2 is included in the list of libraries that make up the system
part of the library list.
MQSeries for AS/ 400 uses programs in this library for data conversion and
SNA LU 6.2 communication.
QALWOBJRST
Ensure that the QALWOBJRST system value is set to *ALL or *ALWPGMADP
before you install MQSeries for AS/ 400. If it is set to *NONE, the installation
will fail.
After installation, reset QALWOBJRST to its original value to maintain system
security.
20 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation Procedure
1. To install the MQSeries for AS/ 400, V5.1 base product, issue the
command:
RSTLICPGM LICPGM(5733A38) DEV(install device) OPTION(*BASE)
where:
v 5733A38 is the product identifier for MQSeries for AS/ 400, V5.1, and
v install device is the device from which the product is to be loaded,
typically a CD-ROM - for example, OPT01.
2. To install the sample applications, issue the command:
RSTLICPGM LICPGM(5733A38) DEV(install device) OPTION(1)
Note: You can install only one instance of MQSeries for AS/ 400 in each
partition of your AS/ 400 machine.
Installation of Translated Versions
MQSeries for AS/ 400 is installed in the language that is the primary language
on your system.
You can install additional versions of the product in any of the languages
specifying the appropriate language ID:
RSTLICPGM LICPGM(5733A38) DEV(install device) RSTOBJ(*LNG) LNG(language ID)
This will install the commands, message file, and panel groups into the
relevant QSYS library for the language. For example, library QSYS2928 is used
for French.
Reinstallation
Reinstallation is discussed in “Reinstalling MQSeries for AS/ 400” on page 103.
Chapter 4. Installing, Migrating to, and Deleting MQSeries for AS/ 400 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Verifying the Installation
Verifying the Installation
To ensure that the product has loaded correctly, issue the Display Software
Resources (DSPSFWRSC) command and check that the licensed program
5733A38 is listed. If you have installed the base and the optional samples, you
should see:
Resource
ID
Option Feature Description
5733A38
5733A38
5733A38
*BASE
*BASE
1
5050
2924
5050
MQSeries for AS/400
MQSeries for AS/400
MQSeries for AS/400 - Samples
If you press F11 while viewing the Display Software Resources screen, you
will see the library and version number of the products installed:
Resource
ID
5733A38
5733A38
5733A38
Feature
Option Feature Type
Library
QMQM
QMQM
Release
V5R1M0
V5R1M0
*BASE
*BASE
1
5050
2924
5050
*CODE
*LNG
*CODE
QMQMSAMP V5R1M0
If you have installed additional language versions, you will also see entries
for these. For example, if you have installed the French version, for which the
language ID is 2928, you will see:
Resource
ID
5733A38
Option Feature Description
*BASE 2928 MQSeries for AS/400
and when you press F11:
Resource
ID
5733A38
Feature
Option Feature Type
*BASE 2928 *LNG
Library
QSYS2928
Release
V5R1M0
Post Installation Tasks
When you have correctly installed MQSeries for AS/ 400, V5.1 on your system:
1. Refer to the MQSeries family Web site at:
http://www.ibm.com/software/ts/mqseries/
for latest product information, and install and apply all PTFs that are
recommended.
2. Start the MQSeries subsystem, by issuing the command:
STRSBS SBSD(QMQM/QMQM)
22 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Quiescing MQSeries
Quiescing MQSeries
The orderly shutdown of MQSeries for AS/ 400 is called quiescing. You may
need to quiesce MQSeries for AS/ 400, for example, to:
v Take a backup of the system, or
v Update MQSeries for AS/ 400
Quiescing previous releases of MQSeries for AS/400
To quiesce one of the previous releases of MQSeries for AS/ 400:
1. Use F12 (Cancel) to return to your initial MENU
Note: If you have MQSeries Commands (CMDMQM) as your initial
menu, change the initial menu in your user profile, sign off and
sign back on.
2. Ensure that you have:
v *ALLOBJ authority, or object management authority for the QMQM and
QMQMADM libraries.
v *USE authority for the following programs:
– QMQM/AMQIQES4
– QMQM/AMQIQEM4
– QMQM/AMQSTOP4
– QMQM/AMQSPECA
Notes:
a. If you use QMQM/AMQIQES4 any user signed on to MQSeries, even if that
user is not running the product, will be logged off.
b. The QMQMADM library exists only if you have installed the MQSeries for
AS/ 400 Administration utility.
3. Warn all users that you are going to stop MQSeries for AS/ 400.
4. Warn users not to start Message Queue Interface applications while
MQSeries for AS/ 400 is being quiesced. To ensure that they cannot start,
you should revoke users’ authorities to MQSeries for AS/ 400 by issuing
the RVKMQMAUT command.
5. Exit the Administration utility, if it is running.
6. Quiesce the queue manager by running program AMQSTOP4:
CALL QMQM/AMQSTOP4 PARM(QMGRNAME *CNTRLD 15)
where QMGRNAME is the name of the queue manager and 15 is a time-out
value in seconds.
7. If this fails, you can force the queue manager to stop by issuing:
CALL QMQM/AMQSTOP4 PARM(QMGRNAME *FORCE 15)
Chapter 4. Installing, Migrating to, and Deleting MQSeries for AS/ 400 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Quiescing MQSeries
Quiescing V5.1 of MQSeries for AS/400
To quiesce MQSeries for AS/ 400, V5.1:
1. Use F12 (Cancel) to return to your initial MENU
Note: If you have MQSeries Commands (CMDMQM) as your initial
menu, change the initial menu in your user profile, sign off and
sign back on.
2. Ensure that you have:
v *ALLOBJ authority, or object management authority for the QMQM library.
v *USE authority for the following programs:
– QMQM/AMQIQES4
– QMQM/AMQIQEM4
– QMQM/AMQSTOP4
– QMQM/AMQSPECA
3. Warn all users that you are going to stop MQSeries for AS/ 400.
4. Warn users not to start Message Queue Interface applications while
MQSeries for AS/ 400 is being quiesced. To ensure that they cannot start,
you should revoke users’ authorities to MQSeries for AS/ 400 by issuing
the RVKMQMAUT command.
5. Quiesce all queue managers by running program AMQSTOP4:
CALL QMQM/AMQSTOP4 PARM(*ALL *CNTRLD 15)
where 15 is a time-out value in seconds.
6. If this fails, you can force queue managers to stop by issuing:
CALL QMQM/AMQSTOP4 PARM(*ALL *FORCE 15)
7. End the MQSeries subsystem, by entering:
ENDSBS SBS(QMQM/QMQM)
Migrating to MQSeries for AS/400, V5.1
You can migrate to MQSeries for AS/ 400, V5.1 from MQSeries for AS/ 400
V3R7, MQSeries for AS/ 400 V4R2, or MQSeries for AS/ 400 V4R2M1.
You must pay particular attention when migrating to MQSeries for AS/ 400,
V5.1. The product has been altered and enhanced significantly since previous
releases.
This section outlines the steps involved in migrating to MQSeries for AS/ 400,
V5.1 from an earlier release. You may find additional, important information
that became available after publication of this book if you refer to the readme
file on the publications CD-ROM, or to the MQSeries family Web site at:
http://www.ibm.com/software/ts/mqseries/
24 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Migrating MQSeries
What are the Differences
MQSeries for AS/ 400, V5.1 provides significant new function over previous
releases, including support for multiple queue managers, queue manager
clusters, and substantially increased message and queue sizes. Enabling this
new function has involved some changes to the internal architecture of
MQSeries. For example this release makes substantial use of the Integrated
File System whereas, previously, all MQSeries data was stored in OS/ 400
objects in libraries.
Another significant change with this release concerns security. To increase
compatibility with the other V5.1 MQSeries platforms and also to provide
authorization to individual MQI calls, the OS/ 400 object-based security model
used in previous releases has been replaced by one using the MQSeries OAM
(Object Authority Manager).
As a consequence of these, and other changes, migration to MQSeries for
AS/ 400, V5.1 from a previously installed release requires special consideration
and careful planning. Areas to which you should apply close attention
include:
v Existing RPG, COBOL, and C applications using the MQI (MQSeries
Interface) should work successfully without the need for recompilation.
There have been some changes in detail in the way some CL commands are
implemented. CL programs using these commands might need to be edited
and recompiled.
v All user exits including channel and data conversion exits must be
recompiled using ILE compilers, bound to the threaded MQSeries libraries,
made thread-safe and enabled for teraspace memory. Details can be found
in the MQSeries Application Programming Guide and the MQSeries
Intercommunication book.
v MQSeries authorizations continue to be administered through the
GRTMQMAUT (Grant MQM Authority) and RVKMQMAUT (Revoke MQM
Authority) commands, but there are substantial changes:
– Authorization lists and reference objects are no longer supported.
– Authorizations that may be given to a user for MQSeries objects are now
grouped into four categories: MQI, Context, Administration, and Generic.
There are additional security considerations to take into account. For details
see the MQSeries for AS/400 V5.1 System Administration book.
Overview of Migration Process
There are two possible migration scenarios:
v Either you are migrating from a previous version of MQSeries on the same
machine, or
v You are transferring MQSeries to a new machine.
Chapter 4. Installing, Migrating to, and Deleting MQSeries for AS/ 400 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Migrating MQSeries
The process is the same except that:
v If you are moving to a new machine, there is one additional step, which is
to transfer data from the old machine to the new.
v If you are upgrading the system on the same machine, you must save your
MQSeries data because the migration process completely deletes your old
version of the product.
To help you migrate, MQSeries for AS/ 400, V5.1 includes a utility program
called MIGRATEMQM. This program migrates your MQSeries configuration
and objects to MQSeries for AS/ 400, V5.1. It also creates a new queue
manager with the same name as the original one. (This queue manager will
act as the default queue manager on your new system unless you have
already defined a default queue manager). The migration program reads
information from the earlier release and creates a matching queue manager at
the new level. It also creates all the MQSeries objects such as queues and
channels. It copies messages held on the old queue manager’s queues to the
new queue manager. It does not, however, migrate your authority definitions.
In MQSeries for AS/ 400, V5.1, each queue manager has its own library
containing that queue manager’s journals and journal receivers. In earlier
versions of MQSeries for AS/ 400, all the journals were in QUSRSYS and all
the receivers were in QMQMDATA. The migration program obtains the
configuration and message data from the journals and data library of the
earlier release.
Before Migration
Before migrating to MQSeries for AS/ 400, V5.1, carry out the following
procedure on the version of MQSeries for AS/ 400 that is currently installed:
1. Stop all applications that are using the existing version of MQSeries for
AS/ 400.
2. End all MQSeries channels. To do this, use the WRKMQMCHL command
and select option 15.
3. Exit the administration utility if it is running.
4. End the MQSeries command server. To do this, enter the command:
ENDMQMCSVR MQMNAME(QMGRNAME) OPTION(*IMMED)
where QMGRNAME is the name of the queue manager.
5. Remove any unwanted messages from your MQSeries queues. To do this,
use the WRKMQMMSG command and select option 4.
6. Resolve any in-doubt messages that are held by sender or server
channels. To do this, use the WRKMQMCHST command and select
option 17.
7. Reset the media recovery point. To do this, enter the command:
RCDMQMIMG OBJ(*ALL) OBJTYPE(*ALL)
26 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Migrating MQSeries
8. Save details of your existing MQSeries authorities. To find these details,
issue the DSPMQMOBJN command to list the queue manager and all the
MQSeries queues and processes that you have. Then issue the
DSPMQMAUT command to list the access that users have to each of
these objects.
10. Copy your MQSeries CL and MQSC files to a suitable save library such
as QGPL.
11. Save your MQSeries data:
v Create a save file for the libraries QMQMDATA and QMQMPROC. To
do this, issue the commands:
CRTSAVF FILE(QGPL/QMQMDATA)
CRTSAVF FILE(QGPL/QMQMPROC)
v Save the libraries QMQMDATA and QMQMPROC into these save files.
To do this, enter the commands:
SAVLIB LIB(QMQMDATA) DEV(*SAVF) SAVF(QGPL/QMQMDATA)
SAVLIB LIB(QMQMPROC) DEV(*SAVF) SAVF(QGPL/QMQMPROC)
v Create a save file for your journals. To do this, issue the command:
CRTSAVF FILE(QGPL/QMQMJRN)
v Save the journals into the save file:
SAVOBJ OBJ(AMQ*) LIB(QUSRSYS) DEV(*SAVF) OBJTYPE(*JRN) SAVF(QGPL/QMQMJRN)
12. If you are transferring MQSeries to a new machine, transfer the save files
to the new machine.
13. Do not start this step until you have saved all your MQSeries data.
When you have completed this step your data will be recoverable only
from your saved images.
Delete your old version of MQSeries for AS/ 400. To do this, use the GO
LICPGM menu and select option 12 (Delete licensed program). Select all
the installable options of MQSeries for AS/ 400 and delete them.
Migration
To migrate to the new release of MQSeries for AS/ 400, follow this procedure.
Note that you need *ALLOBJ authority to complete the procedure.
1.
page 21 for details.
details.
Chapter 4. Installing, Migrating to, and Deleting MQSeries for AS/ 400 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Migrating MQSeries
2. Restore the MQSeries objects for libraries QMQMDATA and QMQMPROC
using the following commands:
RSTLIB SAVLIB(QMQMDATA) DEV(*SAVF) SAVF(QGPL/QMQMDATA)
RSTLIB SAVLIB(QMQMPROC) DEV(*SAVF) SAVF(QGPL/QMQMPROC)
3. Restore the MQSeries local and remote journals using the following
command:
RSTOBJ OBJ(AMQ*) SAVLIB(QUSRSYS) DEV(*SAVF) OBJTYPE(*JRN) SAVF(QGPL/QMQMJRN)
4. Associate the journal receivers by:
a. Issuing the command WRKJRN, specifying the journals
QUSRSYS/ AMQAJRN and QUSRSYS/ AMQRJRN
b. Using option 9 to associate the journals
5. Invoke the migration program MIGRATEMQM. To do this, issue the
command:
CALL PGM(QMQM/MIGRATEMQM)
This command may be issued from the command prompt, or may be
submitted as a batch job. Depending on the number of MQSeries objects
and the number of messages on queues, the program may take some time
to complete. The program creates a default queue manager that matches
the one on your previous release.
When the program has completed, check the job log for errors. If any
errors were encountered during channel-definition migration (for example,
no channel-definition file was found) or during the migration of
channel-synchronization information (for example, no synchronization file
was found), you can rerun these steps individually. To rerun
channel-definition migration, enter:
CALL PGM(QMQM/AMQRMCHA) PARM(QMGRNAME)
where QMGRNAME is the name of the queue manager.
To rerun the migration of channel-synchronization information, enter:
CALL PGM(QMQM/AMQRMSYA) PARM(QMGRNAME)
6. If you wish to set up your work management environment, job
descriptions, and pools, see the MQSeries for AS/400 V5.1 System
Administration book for guidance. Otherwise, use the default setup.
7. Migrate and recompile your user exit programs. Recompile all OPM
programs and programs that are not thread-safe, to make them ILE
compliant and thread-safe. See the MQSeries Application Programming Guide
and the MQSeries Intercommunication book for guidance on how to do this.
8. Reapply security to your MQSeries objects, using the command
GRTMQMAUT. As mentioned earlier the authority model has changed in
this release of MQSeries for AS/ 400. Use the information in the following
tables as guidance for mapping the old authority to the new.
28 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Migrating MQSeries
Note: Any PCF applications must be given explicit access to the queues.
See the MQSeries for AS/400 V5.1 System Administration book for
further information about security.
Table 2. Authorities required to open an object
Opening MQSeries object MQSeries object authority MQSeries object authority
with option MQOO_
required - earlier releases required - V5.1
BROWSE
*READ
*BROWSE
*GET
INPUT_AS_Q_DEF
INPUT_EXCLUSIVE
INPUT_SHARED
INQUIRE
*READ and *DLT
*READ and *DLT
*READ and *DLT
*READ
*GET
*GET
*INQ
OUTPUT
*ADD
*PUT
SET
*UPD
*SET
Table 3. Authorities for Context and AlternateUserID
Opening MQSeries object MQSeries object authority MQSeries object authority
with option MQOO_
required - earlier releases required - V5.1
ALTERNATE_USER
AUTHORITY
*MQMALTUSR (+ *DLT on *ALTUSR
ADM object)
PASS_ALL CONTEXT
*MQMPASSALL (+ *READ *PASSALL
and *OBJOPR on ADM
object)
PASS_IDENTITY
CONTEXT
*MQMPASSID (+ *READ
on ADM object)
*PASSID
*SETALL
*SETID
SET_ALL CONTEXT
*MQMSETALL (+ *ADD
and *UPD on ADM object)
SET_IDENTITY CONTEXT *MQMSETID (+ *UPD on
ADM object)
Verifying the Migration
Use the following procedure to check that you have migrated to MQSeries for
AS/ 400, V5.1 successfully:
1. Make QMQMADM either the primary or a secondary group profile for
your user profile. To do this, enter one of the following commands:
CHGUSRPRF USRPRF(YOUR PROFILE) GRPPRF(QMQMADM)
CHGUSRPRF USRPRF(YOUR PROFILE) SUPGRPPRF(QMQMADM)
Chapter 4. Installing, Migrating to, and Deleting MQSeries for AS/ 400 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Migration Verification
2. Ensure that the MQSeries subsystem, QMQM, is active. To do this, issue
the command:
DSPSBSD SBSD(QMQM/QMQM)
If it is inactive, issue the command:
STRSBS SBSD(QMQM/QMQM)
3. Ensure that the newly-created default queue manager is available. To
check this, use the command:
DSPMQM
If it is not available, start it by issuing the command:
STRMQM MQMNAME(QMGRNAME)
4. If applicable, verify that the queue manager and its objects have been
successfully retained. Some of the commands that you might use to do this
are:
DSPMQM
Display Message Queue Manager (MQM)
Display MQM object names
Work with MQM channel
Work with MQM message
Work with MQM queue
DSPMQMOBJN OBJ(*ALL)
WRKMQMCHL
WRKMQMMSG
WRKMQMQ
5. Use the commands DSPOBJAUT or DSPMQMAUT to review your
authorizations to all types of MQSeries objects (*MQM, *Q, *ALSQ,
*LCLQ, *RMTQ, *PRC, *CMD, *NMLIST).
online help for more information about these commands and how to use
them.
After Migration
When you are satisfied that the migration has completed successfully, you
may delete:
v MQSeries journals. To do this issue the commands:
DLTJRN JRN(QUSRSYS/AMQAJRN)
DLTJRN JRN(QUSRSYS/AMQRJRN)
v MQSeries data libraries: To do this issue the commands:
DLTLIB LIB(QMQMDATA)
DLTLIB LIB(QMQMPROC)
30 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting MQSeries
Deleting MQSeries for AS/400, V5.1
There are two ways of deleting MQSeries for AS/ 400:
v A standard deletion removes MQSeries product code but preserves user
data.
v An entire deletion removes both MQSeries product code and user data.
Standard Deletion
Perform a standard deletion of the MQSeries for AS/ 400 product if you wish
to retain your user data, for example, because you intend to reinstall the
product at a later date.
To perform this deletion:
2. End the MQSeries subsystem, by entering:
ENDSBS SBS(QMQM/QMQM)
3. Ensure that no locks are held on the library QMQM.
4. Use the Delete Licensed Program (DLTLICPGM) command to delete the
base product (and also the samples if you chose to install them). To delete
the base product and the samples enter:
DLTLICPGM LICPGM(5733A38) OPTION(*ALL)
To delete only the samples, you could enter:
DLTLICPGM LICPGM(5733A38) OPTION(1)
Deleting MQSeries for AS/ 400 in this way deletes only the objects that belong
to MQSeries. That is, the QMQM library and / QIBM/ ProdData/ mqm and its
subdirectories. None of the queue manager journal libraries or IFS directories
is removed.
Entire Deletion
You can, if you wish, delete MQSeries entirely, including all user data. If you
do this, save your user data first. It will not be recoverable.
To perform this deletion:
1. Using the WRKMQM command, select option 4 to delete all queue
managers on the system.
Chapter 4. Installing, Migrating to, and Deleting MQSeries for AS/ 400 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting MQSeries
3. End the MQSeries subsystem, by entering:
ENDSBS SBS(QMQM/QMQM)
4. Delete the directory / QIBM/ UserData/ mqm and its subdirectories. Do
this using the EDTF command and then use option 9 for the mqm
directory.
Note: If you do this, you will no longer have any information regarding
your installation. Use this command with extreme caution. The
format of the command is:
EDTF STMF('/QIBM/UserData')
Alternatively, you can delete / QIBM/ UserData/ mqm and its
subdirectories by repeated use of the RMVLNK and RMVDIR commands.
5. Ensure that no locks are held on the library QMQM.
6. Use the Delete Licensed Program (DLTLICPGM) command to delete the
base product (and also the samples if you chose to install them). To delete
the base product and the samples enter:
DLTLICPGM LICPGM(5733A38) OPTION(*ALL)
7. Identify all the users who belong to the QMQMADM group. Use the
DSPUSRPRF command to display a list of them. You need to remove the
QMQMADM group profile from their user profiles before you can delete
the QMQMADM user profile. The format of the command is:
DSPUSRPRF USRPRF(QMQMADM) TYPE(*GRPMBR)
8. For each of the user profiles QMQM, QMQMADM, and NOBODY, use the
WRKOBJOWN command to list all the objects owned by the profile. You
need to alter the ownership or delete the objects before you can delete the
user profile. The format of the command is:
WRKOBJOWN USRPRF(PROFILE)
32 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. Using MQSeries for AS/400, V5.1
This chapter introduces MQSeries command sets and some basic tasks that
you can perform to get yourself started with MQSeries for AS/ 400, V5.1.
Tasks include creating and starting a queue manager, and creating, clearing,
browsing, and deleting a local queue. The examples given use CL commands,
but you can select the appropriate command from any of the supplied
command sets.
Before you Start
Before you can use MQSeries for AS/ 400 you must start a subsystem. If you
have not already done so, issue the command:
STRSBS SBSD(QMQM/QMQM)
To use MQSeries CL commands, for example CRTMQM (create queue
manager) or STRMQM (start queue manager), your user profile must be a
member of the group profile QMQMADM. Use the CHGUSRPRF command to
change your user profile, and specify QMQMADM against either the group
profile (GRPPRF) parameter or the supplementary group profile
(SUPGRPPRF) parameter.
It is not essential for your user profile to belong to the QMQMADM group
profile for issuing PCF commands from an administration program or MQI
calls from an application program.
If you have installed the samples, ensure that all users have access to the
QMQMSAMP library. Do this using the GRTOBJAUT command:
GRTOBJAUT OBJ(QMQMSAMP) OBJTYPE(*LIB) USER(*PUBLIC) AUT(*USE)
For details of MQSeries Work Management and security, see the MQSeries for
AS/400 V5.1 System Administration book.
Introducing Command Sets
MQSeries provides three command sets for performing administration tasks:
v Command Language commands (CL commands)
v MQSC commands
v PCF commands
© Copyright IBM Corp. 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Before you Start
CL Commands
The AS/ 400 CL commands for MQSeries can be grouped as follows:
v Channel commands - used to create, start, and delete channels.
v Cluster commands - used to work with queue manager clusters.
v Command server commands - used to display, start, and end the command
server.
v Data type conversion command - used to convert data types.
v Dead-letter queue handler command - used to start the dead-letter queue
handler.
v Media recovery commands - used to record and re-create objects.
v MQSeries command - used to start a batch of MQSeries commands.
v Name command - used to display object names.
v Namelist commands - used to work with namelists.
v Process commands - used to change, copy, and delete processes.
v Queue commands - used to create, delete, and work with queues.
v Queue manager commands - used to connect, create, and delete queue
managers.
v Security commands - used to display, grant, and revoke object authority.
v Trace command - used to trace service jobs.
v Transaction commands - used to display and resolve transactions.
v Trigger monitor commands - used to start trigger monitors.
Using CL Commands
You can enter CL commands from a command line.
The following table gives a brief description of each MQSeries CL command.
To display online help for a CL command, enter the command and press F1.
To see a full list of MQSeries commands, enter the command GO CMDMQM
from the MQSeries menu.
Command
Usage
CCTMQM (connect message queue manager)
supported only for compatibility with previous
releases.
CHGMQM (change message queue manager)
to change the attributes of a message queue
manager.
CHGMQMCHL (change MQM channel)
CHGMQMNL (change MQM namelist)
CHGMQMPRC (change MQM process)
CHGMQMQ (change MQM queue)
CLRMQMQ (clear MQM queue)
to change the attributes of an existing channel.
to change the attributes of a namelist.
to change the attributes of a process definition.
to change the attributes of a queue.
to delete all messages from a local queue.
CPYMQMCHL (copy MQM channel)
to create a copy of an existing channel
definition.
CPYMQMNL (copy MQM namelist)
CPYMQMPRC (copy MQM process)
CPYMQMQ (copy MQM queue)
to create a copy of a namelist.
to create a copy of a process definition.
to create a copy of an existing queue definition.
to create a local queue manager.
CRTMQM (create message queue manager)
CRTMQMCHL (create MQM channel)
to create a new channel definition.
34 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you Start
Command
Usage
CRTMQMNL (create MQM namelist)
CRTMQMPRC (create MQM process)
CRTMQMQ (create MQM queue)
to create a new namelist.
to create a new process definition.
to create a queue definition.
CVTMQMDTA (convert MQM data type
command)
to create a fragment of code that performs data
conversion on data type structures.
DLTMQM (delete message queue manager)
DLTMQMCHL (delete MQM channel)
DLTMQMNL (delete MQM namelist)
DLTMQMPRC (delete MQM process)
DLTMQMQ (delete MQM queue)
to delete a local queue manager.
to delete a channel definition.
to delete a namelist.
to delete a process definition.
to delete a queue.
DSCMQM (disconnect message queue
manager)
supported only for compatibility with previous
releases.
DSPMQM (display message queue manager)
to display the attributes of a local queue
manager.
DSPMQMAUT (display MQM object authority) to display a list of authorized users and their
authorities for a specified object.
DSPMQMCHL (display MQM channel)
to display the attributes of a channel definition.
to display the status of the command server.
DSPMQMCSVR (display MQM command
server)
DSPMQMNL (display MQM namelist)
to display the attributes of a namelist.
DSPMQMOBJN (display MQM object names)
to display the AS/ 400 name and type for any
object name and type.
DSPMQMPRC (display MQM process)
DSPMQMQ (display MQM queue)
ENDMQM (end message queue manager)
ENDMQMCHL (end MQM channel)
to display the attributes of a process definition.
to display the attributes of a queue definition.
to end the local message queue manager.
to close a channel.
ENDMQMCSVR (end MQM command server) to stop the command server for a specified
local queue manager.
ENDMQMLSR (end MQM listener)
to stop the MQSeries listener program.
GRTMQMAUT (grant MQM object authority)
to grant specific authority for an object to other
users.
PNGMQMCHL (ping MQM channel)
to test a channel.
RCDMQMIMG (record MQM object image)
to provide a marker for a selected set of
objects.
RCRMQMOBJ (re-create MQM object)
RFRMQMCL (refresh cluster)
to provide recovery for a damaged set of
objects.
to refresh the cluster information that a queue
manager has stored.
RSMMQMCLQM (resume cluster queue
manager)
to inform cluster queue managers that the local
queue manager has become available.
RSTMQMCHL (reset MQM channel)
RSTMQMCL (reset queue manager cluster)
RSVMQMCHL (resolve MQM channel)
to reset the message sequence number for a
channel to a specific number.
to reset the information held in a cluster about
its queue managers.
to request a channel to commit or back out
in-doubt messages.
RSVMQMTRN (resolve MQSeries transaction)
RVKMQMAUT (revoke MQM authority)
to resolve in-doubt MQSeries transactions.
to remove authority for named objects.
Chapter 5. Using MQSeries for AS/ 400, V5.1 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you Start
Command
Usage
SPDMQMCLQM (suspend cluster queue
manager)
to inform cluster queue managers that the local
queue manager is not available.
STRMQM (start message queue manger)
STRMQMCHL (start MQM channel)
to start a local queue manager.
to start a channel.
STRMQMCHLI (start MQM channel initiator)
to start a channel initiator.
STRMQMCSVR (start MQM command server) to start a command server for a queue
manager.
STRMQMDLQ (start MQSeries dead-letter
queue handler)
to start the dead-letter queue handler.
STRMQMLSR (start MQM listener)
STRMQMMQSC (start MQSeries commands)
STRMQMTRM (start trigger monitor)
TRCMQM (trace MQM job)
to start a message queue manager listener.
to initiate a set of MQSeries commands.
to start a trigger monitor.
to start and stop MQSeries trace.
to work with queue managers.
WRKMQM (work with message queue
managers)
WRKMQMCHL (work with MQM channel)
to work with channel definitions.
WRKMQMCHST (work with MQM channel
status)
to work with the status of channel definitions.
WRKMQMCL (work with clusters)
to work with clusters.
WRKMQMCLQ (work with cluster queues)
WRKMQMMSG (work with MQM messages)
to work with cluster queues.
to work with specified messages on a local
queue.
WRKMQMNL (work with MQM namelists)
WRKMQMPRC (work with MQM process)
WRKMQMQ (work with MQM queues)
to work with namelists.
to work with process definitions.
to work with queues.
WRKMQMTRN (work with MQSeries
transactions)
to work with in-doubt MQSeries transactions.
MQSeries (MQSC) Commands
You use the MQSeries (MQSC) commands to manage queue manager objects,
including the queue manager itself, channels, queues, and process definitions.
For example, there are commands to define, alter, display, and delete a
specified queue.
When you display a queue, using the DISPLAY QUEUE command, you
display the queue attributes. For example, the MAXMSGL attribute specifies
the maximum length of a message that can be put on the queue. The
command does not show you the messages on the queue.
For detailed information about each MQSC command, see the MQSeries
Command Reference.
Running MQSC Commands
You run MQSC commands by entering the CL command STRMQMMQSC on
the command line. This allows you to run a series of commands that you
have previously entered in a member of a source physical file.
36 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you Start
PCF Commands
MQSeries programmable command format (PCF) commands allow you to
program administration tasks into an administration program. For a complete
description of the PCF commands and how to use them, see the MQSeries
Programmable System Management book.
Working with MQSeries
If you are new to MQSeries for AS/ 400, you are recommended to set up a test
system. Then you can verify that you have installed the product correctly and
perform some basic MQSeries operations.
To set up a test system you need to create a queue manager and a local
queue. As an introduction to MQSeries for AS/ 400, create these objects with
CL commands from the command line, and work through the AS/ 400 panels.
Creating a Queue Manager
1. Issue the CRTMQM command from the command line and press F4. The
Create Message Queue Manager (CRTMQM)
Type choices, press Enter.
Message Queue Manager name . . .
______
__________________________________________
*BLANK____________________________________
Text ’description’ . . . . . . .
___________________________________
Trigger interval . . . . . . . .
Undelivered message queue . . .
______
999999999__
0-999999999
*NONE_____________________________________
Default Transmission queue . . .
______
*NONE_____________________________________
Maximum handle limit . . . . . .
Maximum uncommitted messages . .
Default Queue Manager . . . . .
256________
10000______
*NO
1-999999999
1-10000
*YES, *NO
Bottom
F13=How to use this display
F3=Exit
F4=Prompt
F5=Refresh F12=Cancel
F24=More keys
Parameter MQMNAME required.
Figure 1. CRTMQM panel
If the screen does not appear, it may be that you have not installed
MQSeries for AS/ 400 correctly. If this is the case, delete the product as
reinstall the *BASE product and try the CRTMQM command again.
Chapter 5. Using MQSeries for AS/ 400, V5.1 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with MQSeries
2. On the CRTMQM panel, type in a Message Queue Manager name, for
example TEST.QMANAGER and press Enter.
The name of the queue manager can be a maximum of 48 characters in
length. Valid characters are detailed in MQSeries for AS/400 V5.1 System
Administration book.
The queue manager is then created, along with a set of default objects.
Starting a Queue Manager
Start the queue manager from the command line by issuing the command:
STRMQM MQMNAME(QMGRNAME)
where QMGRNAME is the name of the queue manager that you have just created.
After a short period you receive the message Message Queue Manager started.
Creating a Local Queue
To create a local queue:
1. Type CRTMQMQ on the command line and press F4. This displays the
following panel:
Create MQM Queue (CRTMQMQ)
Type choices, press Enter.
Queue name . . . . . . . . . . .
_____
__________________________________________
Queue type . . . . . . . . . . .
Message Queue Manager name . . .
_____
*ALS, *LCL, *MDL, *RMT
*DFT______________________________________
Bottom
F3=Exit
F4=Prompt
F5=Refresh
F12=Cancel
F13=How to use this display
F24=More keys
Parameter QNAME required.
Figure 2. CRTMQMQ panel (part 1)
2. On the Create MQM Queue panel, type the name of the queue you want
to create in the Queue name field. For example TEST.QUEUE. To specify a
mixed-case name, enclose the name in apostrophes.
3. Type *LCL in the Queue type field.
38 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with MQSeries
4. Fill in the name of your queue manager in the
Message Queue Manager name field. For example TEST.QMANAGER.
5. Press Enter.
There are three more parts to the CRTMQMQ panel. Scroll through them and
enter values for the other options if you wish, or otherwise just accept all the
Create MQM Queue (CRTMQMQ)
Type choices, press Enter.
Queue name . . . . . . . . . . . > TEST.QUEUE_________________________________
_____
Queue type . . . . . . . . . . . > *LCL
*ALS, *LCL, *MDL, *RMT
Message Queue Manager name . . . > TEST.QMANAGER______________________________
_____
Replace . . . . . . . . . . . .
Text 'description' . . . . . . .
__________________________________
Put enabled . . . . . . . . . .
Default message priority . . . .
*NO
*NO, *YES
' '________________________________________
*YES
0
*SYSDFTQ, *NO, *YES
0-9, *SYSDFTQ
Default message persistence . . *NO
*SYSDFTQ, *NO, *YES
Process name . . . . . . . . . .
_____
' '________________________________________
Triggering enabled . . . . . . .
Get enabled . . . . . . . . . .
Sharing enabled . . . . . . . .
*NO
*YES
*YES
*SYSDFTQ, *NO, *YES
*SYSDFTQ, *NO, *YES
*SYSDFTQ, *NO, *YES
More...
F3=Exit
F4=Prompt
F5=Refresh F12=Cancel
F13=How to use this display
F24=More keys
Figure 3. Create MQM Queue panel (part 2)
Chapter 5. Using MQSeries for AS/ 400, V5.1 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with MQSeries
Create MQM Queue (CRTMQMQ)
Type choices, press Enter.
Default share option . . . . . .
Message delivery sequence . . . *PTY
*YES
*SYSDFTQ, *NO, *YES
*SYSDFTQ, *PTY, *FIFO
*SYSDFTQ, *NO, *YES
*SYSDFTQ, *FIRST, *ALL...
1-999999999, *SYSDFTQ
0-9, *SYSDFTQ
Harden backout count . . . . . .
Trigger type . . . . . . . . . .
Trigger depth . . . . . . . . .
Trigger message priority . . . .
Trigger data . . . . . . . . . .
_____
*YES
*FIRST
1
0
' '________________________________________
Retention interval . . . . . . .
Maximum queue depth . . . . . .
Maximum message length . . . . .
Backout threshold . . . . . . .
Backout requeue name . . . . . .
_____
999999999
5000
4194304
0
0-999999999, *SYSDFTQ
0-640000, *SYSDFTQ
0-4194304, *SYSDFTQ
0-999999999, *SYSDFTQ
' '________________________________________
Initiation queue . . . . . . . . ' '________________________________________
_____
More...
F3=Exit
F4=Prompt
F5=Refresh F12=Cancel
F13=How to use this display
F24=More keys
Figure 4. Create MQM Queue panel (part 3)
Create MQM Queue (CRTMQMQ)
Type choices, press Enter.
Usage . . . . . . . . . . . . .
Queue depth high threshold . . .
*NORMAL
80
*SYSDFTQ, *NORMAL, *TMQ
0-100, *SYSDFTQ
Queue depth low threshold . . . 20
0-100, *SYSDFTQ
Queue full events enabled . . .
Queue high events enabled . . .
Queue low events enabled . . . .
Service interval . . . . . . . .
Service interval events . . . .
*YES
*YES
*YES
999999999
*NONE
*SYSDFTQ, *NO, *YES
*SYSDFTQ, *NO, *YES
*SYSDFTQ, *NO, *YES
0-999999999, *SYSDFTQ
*SYSDFTQ, *HIGH, *OK, *NONE
*SYSDFTQ, *NO, *YES
Distribution list support . . . *NO
Cluster Name . . . . . . . . . .
_____
' '________________________________________
Cluster Name List . . . . . . . ' '________________________________________
_____
Default Binding . . . . . . . .
*OPEN
*SYSDFTQ, *OPEN, *NOTFIXED
Bottom
F13=How to use this display
F3=Exit
F4=Prompt
F5=Refresh F12=Cancel
F24=More keys
Figure 5. Create MQM Queue panel (part 4)
When you have finished reviewing and making changes to the values, press
Enter to create the queue.
40 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with MQSeries
Sending a Test Message
To put a test message on your queue use the supplied sample programs. For
example, to put messages to a queue called TEST.QUEUE, defined for a queue
manager called TEST.QMANAGER, enter the command:
CALL PGM(QMQM/AMQSPUT0) PARM(TEST.QUEUE TEST.QMANAGER)
You can now type a message (a simple character string is sufficient) and press
Enter to send the message to the queue. Press Enter again to return to a
command line.
To see the message on the queue, either:
v Type CALL PGM(QMQM/AMQSGET4) PARM(TEST.QUEUE TEST.QMANAGER) on a
command line.
sample programs.
Browsing Queues
To browse the messages on a local queue called TEST.QUEUE, defined for a
queue manager called TEST.QMANAGER, use the following command:
WRKMQMMSG MQMNAME(TEST.QMANAGER) QNAME(TEST.QUEUE)
This command displays all messages on the queue, and allows you to view
the message contents.
Clearing a Local Queue
To delete all the messages on a local queue called TEST.QUEUE, defined for a
queue manager called TEST.QMANAGER, use the following command:
CLRMQMQ MQMNAME(TEST.QMANAGER) QNAME(TEST.QUEUE)
Deleting a Local Queue
To delete a local queue called TEST.QUEUE, defined for a queue manager
called TEST.QMANAGER, use the following command:
DLTMQMQ MQMNAME(TEST.QMANAGER) QNAME(TEST.QUEUE)
Note: You must delete all messages from the queue using the CLRMQMQ
command before you can delete a queue.
Stopping a Queue Manager
There are two ways of quiescing a queue manager:
1. Either use the command ENDMQM MQMNAME(QMGRNAME), where QMGRNAME is the
name of the queue manager, or
2. Enter the command WRKMQM *ALL, enter option 6 (end) against the queue
manager name, and then press F4.
Chapter 5. Using MQSeries for AS/ 400, V5.1 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with MQSeries
There are 4 options you can use when ending a queue manager:
1. OPTION (*CNTRLD). This allows current transactions to complete, and all
applications to disconnect, before ending the queue manager. This option
is the default.
2. OPTION (*IMMED). This immediate shutdown allows any current calls to
complete, but stops any new calls. It does not wait for applications to
disconnect from the queue manager.
3. OPTION (*WAIT). This performs the same type of shutdown as the
(*CNTRLD) option, but gives you confirmation that the queue manager has
ended. The command prompt does not return until the queue manager has
ended.
4. OPTION (*PREEMPT). This preemptive shutdown ends all queue manager
code immediately. It can have unpredictable consequences and should not
be used unless all other options have failed.
Deleting a Queue Manager
To delete a queue manager, first stop it, then issue the command:
DLTMQM MQMNAME(QMGRNAME)
Note: When you delete a queue manager you also delete all resources
associated with that queue manager, including all queues, all messages,
and all object definitions.
Checking what Queue Managers you have Running
Sometimes you may want to remind yourself how many queue managers you
have running. You can do this using the WRKMQM command. Enter the
command with no parameters. A list of all configured queue managers will be
displayed, showing which are active and which are inactive.
Other Things to Do
manage a single queue manager and queue. In reality you will need many
more tasks and MQSeries objects to use MQSeries effectively. For example,
you must also create:
v A remote queue (that is, a local definition for a queue on a remote queue
manager)
v A transmission queue
v Sender and receiver channels
You also need to start a channel listener if you are using TCP, and you may
want to start a channel initiator too. Refer to the MQSeries for AS/400 V5.1
System Administration book, for details of how to set up and use these objects.
42 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
User Exits
User Exits
Before using user exits on MQSeries for AS/ 400, V5.1, relink them with the
threaded libraries and ensure that they are thread-safe and teraspace enabled.
See the MQSeries Application Programming Guide and the MQSeries
Intercommunication book for further information about creating user exit
programs.
Setting the Queue Manager CCSID for MQSeries for AS/400
When you create a queue manager, its coded character set identifier (CCSID)
is set by default. It is set to the value of the CCSID of the OS/ 400 job you
used to create the queue manager.
You can query the value of this CCSID by entering the DSPMQM CL
command. This displays the attributes of the local queue manager, including
the coded character set identifier.
You can modify the queue manager’s CCSID by using the CHGMQM CL
command. Before doing this, make a note of the original CCSID value in case
you need to reset it at a later date. To change the CCSID, follow this
procedure:
1. Issue the DSPMQM command and make a note of the CCSID value.
2. Change the CCSID to the new CCSID, with the command:
CHGMQM CCSID(value)
3. Stop the queue manager with the ENDMQM command.
4. Restart the queue manager with the STRMQM command and also restart
any channels that it uses.
For information about code sets and CCSIDs that are supported by MQSeries
for AS/ 400 see the AS/400 National Language Support book. See the MQSeries
Command Reference for more information about MQSeries commands.
Chapter 5. Using MQSeries for AS/ 400, V5.1 43
Download from Www.Somanuals.com. All Manuals Search And Download.
44 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Planning to Install MQSeries Clients
This chapter provides a summary of the hardware and software required to
run the following MQSeries clients:
v MQSeries client for AIX
v MQSeries client for DOS
v MQSeries client for HP-UX
v MQSeries client for OS/ 2 Warp
v MQSeries client for Sun Solaris
v MQSeries client for Windows 3.1
v MQSeries client for Windows 95 and Windows 98
v MQSeries client for Windows NT®
You can install all of these clients from the MQSeries Client CD. The Client
CD also contains other MQSeries components that you might need to install
on a workstation other than the server.
Applications on Version 5 Clients
A Version 5 client can connect to all queue managers, non-Version 5 as well as
Version 5. If you are connecting to a non-Version 5 queue manager, you
cannot use the new Version 5.1 features and structures in your MQSeries
application on the client.
AIX Client: Hardware and Software Required
This section outlines the hardware and software requirements for an MQSeries
client for AIX.
Hardware
An MQSeries client can run on an IBM RISC System/ 6000®, capable of
running AIX Version 4.2 or later. Any other trademarked AIX system can be
used, whether from IBM or other vendors such as Bull, Zenith, or Motorola.
There must be enough random access memory (RAM) and disk storage for
the programming prerequisites (below), the MQSeries client, the access
methods, and the application programs.
Software
The following are prerequisites for MQSeries applications running on an AIX
client.
Minimum supported software levels are shown. Later levels, if any, will be
supported unless otherwise stated.
© Copyright IBM Corp. 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Hardware and Software, AIX
v AIX Version 4.2 (5765-655 or 5765-C34) or AIX Version 4.3 or later.
Later levels of some listed products might be required for AIX Version 4.2,
SMP, and SP™. Later levels of operating system might be required to
support corequisite products.
Connectivity
For TCP/ IP connectivity:
v TCP/ IP (in the operating system)
For SNA LU 6.2 connectivity:
v IBM eNetwork™ Communications Server for AIX, Version 5.0
Optional software
v IBM DCE Version 2.2. This must be the U.S. Domestic version supporting
DES encryption if the user wishes to run the MQSeries-supplied DCE send,
receive, or message exits.
MQSeries DCE names and security modules are provided as part of the
MQSeries for AIX product.
Compilers for MQSeries Applications on AIX Clients
The following compilers are supported:
v IBM C for AIX, Version 4.4
v IBM C Set++ for AIX, Version 3.1 (5765-421)
v IBM C and C++ compiler, Version 3.6
v IBM VisualAge C++ Professional for AIX, Version 4.0
v IBM COBOL Set for AIX, Version 1.1
v Micro Focus COBOL Compiler for UNIX®, Version 4.0
v IBM PL/ I Set for AIX, Version 1.1
v IBM VisualAge Java Enterprise Edition for AIX, Version 2.0
Components for AIX
MQSeries Client
The MQSeries client code for your UNIX platform.
Samples
Sample application programs.
Support for DCE in Samples
The DCE samples support. This should be installed only if you are
going to use DCE.
Run-time component
Support for external applications. This does not enable you to write
your own applications.
Base
Support to enable you to create and support your own applications.
Requires the run-time component to be installed.
46 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Components for AIX
MQSeries Client for Java
This allows Java applets running on your client machine to
communicate with MQSeries. It includes security exits for encryption
and authentication of messages sent across the Web by the MQSeries
Client for Java. These exits consist of some Java classes. To use the
client for Java you need to have Java run-time code on your machine,
at the following (or later compatible) levels:
AIX Java version 1.1.1
HP-UX Java version 1.1.2
Sun Solaris Java version 1.1.1
For information about Java run-time see the MQSeries Using Java book.
Note: If it is possible on your platform, at installation time the
CLASSPATH environment variable will either be updated if
already present, or created if not.
MQSeries Internet Gateway documentation
MQSeries Internet Gateway documentation supplied in HTML format.
MQSeries Internet Gateway
Provides access to MQSeries applications via HTML and CGI (only
CGI on the Sun Solaris platform). The MQSeries Internet Gateway
does not support NSAPI on the HP-UX platform.
Digital UNIX Client: Hardware and Software Required
This section outlines the hardware and software requirements for an MQSeries
client for Digital UNIX (Compaq Tru64 UNIX).
Hardware
An MQSeries client can run on any Digital Alpha machine capable of running
Digital UNIX, Version 4.0.D.
Software
The following are prerequisites for MQSeries applications running on a Digital
UNIX client.
Minimum supported levels are shown. Later levels, if any, will be supported
unless otherwise stated.
v Digital UNIX, Version 4.0.D or later Version 4.0.x
Connectivity
For TCP/ IP connectivity, any communications hardware supporting TCP/ IP
in the Digital UNIX environment can be used.
Chapter 6. Planning to Install MQSeries Clients 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware and software, Digital UNIX
Compilers for MQSeries applications on Digital UNIX clients
The following compiler is supported:
v DEC C, Version 5.2 for Digital UNIX
DOS Client: Hardware and Software Required
This section outlines the hardware and software requirements for an MQSeries
client for DOS.
Hardware
An MQSeries client can run on DOS, on a personal computer. There must be
enough random access memory (RAM) and disk storage for the programming
prerequisites (below), the MQSeries client, the access methods, and the
application programs.
Software
The following are prerequisites for MQSeries applications running on a DOS
client.
Minimum supported software levels are shown. Later levels, if any, will be
supported unless otherwise stated.
v DOS, Version 5.0 or later
Connectivity
v TCP/ IP (in the operating system)
v SPX
Optional software
v Novell Netware Client for DOS/ Win, Version 1.20 and Version 2.5
v Novell LAN Workplace, Version 5.1
v FTP PC/ TCP for DOS, Version 5.0
The DOS access kit allows clients access to TCP/ IP via programs that run in a
DOS window under WIN-OS/ 2®.
The Novell Netware Client for OS/ 2 Warp allows clients access to SPX via
programs that run in a DOS window under WIN-OS/ 2.
Compilers for MQSeries Applications on DOS Clients
The following compiler is supported:
v Microsoft® Visual C++, Version 1.5
48 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Components for DOS
Components for DOS
MQSeries Client
The MQSeries client code for your platform.
MQSeries Toolkit
This includes:
v Sample programs - some of these are required for verifying the
installation of the MQSeries client/ server system
v Header files that you can use when writing applications to run on
the client
HP-UX Client: Hardware and Software Required
This section outlines the hardware and software requirements for an MQSeries
client for HP-UX.
Hardware
An MQSeries client can run on HP-UX on any HP 9000 Series 700 or Series
800 or Stratus Continuum/ 400 machine, with minimum system disk space of
20 MB.
Software
The following are prerequisites for MQSeries applications running an HP-UX
client.
Minimum supported levels are shown. Later levels, if any, will be supported
unless otherwise stated.
v HP-UX, Version 10.20
v HP-UX, Version 11
Connectivity
For TCP/ IP connectivity:
v TCP/ IP (in the operating system)
For SNA connectivity:
v HP SNAplusII
Optional software
v The HP DCE/ 9000 version appropriate for the level of the HP-UX operating
system in use.
v MQSeries DCE names and security modules are provided as part of the
MQSeries for HP-UX product.
Chapter 6. Planning to Install MQSeries Clients 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware and Software, HP-UX
Compilers for MQSeries Applications on HP-UX Clients
The following compilers are supported:
v Micro Focus COBOL for UNIX, Version 4.0
v HP-UX ANSI C compiler
v C Softbench, Version 5.0
v HP CFRONT C++, Version 3.1
v IBM C and C++ compilers, Version 3.6
v HP ANSI C++
Components for HP-UX
OS/2 Warp Client: Hardware and Software Required
This section outlines the hardware and software requirements for an MQSeries
client for OS/ 2 Warp.
Hardware
An MQSeries client can run on OS/ 2 Warp, on a personal computer. There
must be enough random access memory (RAM) and disk storage for the
programming prerequisites (below), the MQSeries client, the access methods,
and the application programs.
The system unit must have a CD-ROM device.
Software
The following are prerequisites for MQSeries applications running an OS/ 2
Warp client.
This is the minimum supported software level. Later levels, if any, will be
supported unless otherwise stated.
v OS/ 2 Warp, Version 4.0 (84H1426) (5622-851)
v OS/ 2 Warp Server, Version 4.0 (25H8002)
v OS/ 2 Warp Server Advanced SMP feature, Version 4.0
v OS/ 2 Workspace-on-Demand
Connectivity
v IBM eNetwork Communications Server for OS/ 2 Warp, Version 5.0
v Novell Netware Client for OS/ 2 Warp, Version 1.20 (for direct IPX/ SPX
support)
v IntraNetWare Client for OS/ 2 Warp, Version 2.12
v TCP/ IP for OS/ 2 Warp, Version 2.0 base kit plus NetBIOS kit, Version 3.5
(base kit is essential)
v NetWare for OS/ 2 Warp, Version 4.11
50 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware and Software, OS/2 Warp
Optional software
v IBM Directory and Security Server for OS/ 2 Warp, Version 4 or later
compatible versions. This must be the U.S. Domestic version supporting
DES encryption if the user wishes to run the MQSeries-supplied DCE send,
receive, or message exits.
v If used as a DCE server this software is known to run adequately in the
following environment:
– On a Pentium® processor running 90 MHz or faster
– On a machine with 64 MB or more of memory
– Using OS/ 2 Warp Server, Version 4.0 or later
v MQSeries DCE names and security modules are provided as part of the
MQSeries for OS/ 2 Warp product.
Compilers for MQSeries Applications on OS/2 Warp Clients
The following compilers are supported:
v IBM VisualAge® COBOL for OS/ 2 Warp, Version 1.1 and Version 2.2
v Micro Focus COBOL compiler, Version 4.0 (32 bit)
v IBM VisualAge C++ for OS/ 2 Warp, Version 3.0
v Borland C++ compiler, Version 2.0 and Version 5.02 (C bindings only)
v IBM C and C++ compilers, Version 3.6
v IBM PL/ I for OS/ 2 Warp, Version 1.2
v IBM VisualAge for PL/ I for OS/ 2 Warp
v IBM VisualAge Java Enterprise Edition for OS/ 2 Warp, Version 2.0
v IBM VisualAge Java Professional Edition for OS/ 2 Warp, Version 2.0
Components for OS/2 Warp
MQSeries Client
The MQSeries client code for your platform.
MQSeries Development Toolkit
This includes:
v Sample programs
v Header files that you can use when writing applications to run on
the client
MQSeries Client for Java
This allows Java applets running on your client machine to
communicate with MQSeries. It includes security exits for encryption
and authentication of messages sent across the Web by the MQSeries
Client for Java. These exits consist of some Java classes. To use the
client for Java you need Java 1.1.1 (or later compatible version)
runtime code on your machine. On Windows NT, you require
Microsoft Windows NT Version 4. On OS/ 2 Warp the MQSeries client
Chapter 6. Planning to Install MQSeries Clients 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Components for OS/2 Warp
for Java must be installed on an HPFS formatted drive. For
Note: If it is possible on your platform, at installation time the
CLASSPATH environment variable will either be updated if
already present, or created if not.
MQSeries Internet Gateway documentation
MQSeries Internet Gateway documentation supplied in HTML format.
MQSeries Internet Gateway
Provides access to MQSeries applications via HTML and CGI.
Sun Solaris Client: Hardware and Software Required
This section outlines the hardware and software requirements for an MQSeries
client for Sun Solaris.
Hardware
An MQSeries client can run only on:
v Sun SPARC desktop or server
v Sun UltraSPARC desktop or server
with a minimum system disk space of 25 MB.
Note: Solaris systems from other manufacturers are not supported.
For connectivity, any communications hardware supporting SNA LU 6.2 or
TCP/ IP.
Software
The following are prerequisites for MQSeries applications running on a Sun
Solaris client.
Minimum supported software levels are shown. Later levels, if any, will be
supported unless otherwise stated.
v Sun Solaris, Version 2.6 with patches 105210-13 and 105568-10, and Sun
Solaris 7.
Connectivity
v SunLink SNA Peer-to-Peer, Version 9.1
v TCP/ IP as part of the base operating system
v If token ring is to be used: SunLink Token Ring Interface / SBus, Version
3.0.2. This requires patch 102463 or Sun TRI/ P Adapter, Version 1.0
52 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware and Software, Sun Solaris
Optional software
Transarc DCE, Version 1.1. This must be the U.S. version supporting DES
encryption for users to run the MQSeries-supplied DCE send, receive or
message exits.
DCE names and security modules for MQSeries are provided as part of the
MQSeries for Sun Solaris product.
Compilers for MQSeries Applications on Sun Solaris Clients
The following compilers are supported:
v SunWorkShop Compiler C, Version 4.2
v SunWorkShop Compiler C++, Version 4.2
Components for Sun Solaris
Windows 3.1 Client: Hardware and Software Required
This section outlines the hardware and software requirements for an MQSeries
client for Windows 3.1.
Hardware
An MQSeries client can run on Windows 3.1, on a personal computer. There
must be enough random access memory (RAM) and disk storage for the
programming prerequisites (below), the MQSeries client, the access methods,
and the application programs.
Software
The following are prerequisites for MQSeries applications running on a
Windows 3.1 client.
Minimum supported software levels are shown. Later levels, if any, will be
supported unless otherwise stated.
v Windows 3.1
v Windows 95 in 16-bit mode
v Windows for Workgroups
Connectivity
v TCP/ IP
v SPX
Optional software
v Novell Netware client for DOS/ Win31, Version 1.20
v SunPC NSF, Version 5.1
v OnNet SDK for Windows
Chapter 6. Planning to Install MQSeries Clients 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware and Software, Windows 3.1
Compilers for MQSeries Applications on Windows 3.1 Clients
The following compiler is supported:
v Microsoft Visual C++, Version 1.5
Components for Windows 3.1
These are identical to those for DOS. See “Components for DOS” on page 49.
Windows 95 and Windows 98 Client: Hardware and Software Required
This section outlines the hardware and software requirements for an MQSeries
client for Windows 95 and Windows 98.
Hardware
An MQSeries client can run on Windows 95 or Windows 98 on a personal
computer. There must be enough random access memory (RAM) and disk
storage for the programming prerequisites (below), the MQSeries client, the
access methods, and the application programs.
Software
The following are prerequisites for MQSeries applications running on a
Windows 95 and Windows 98 client.
Minimum supported software levels are shown. Later levels, if any, will be
supported unless otherwise stated.
v Windows 95 or Windows 98
Connectivity
v TCP/ IP (in the operating system)
v SPX (in the operating system)
v NetBIOS (in the operating system)
Optional software:
v IBM DCE for Windows 95, Version 1.1
A DCE security module is provided as part of the MQSeries client for
Windows 95 and Windows 98. IBM DCE for Windows 98 does not currently
support DES encryption, so you cannot run the DCE send, receive, or
message exits supplied by MQSeries.
Compilers for MQSeries Applications on Windows 95 and Windows 98
Clients
The following compilers are supported:
v Micro Focus COBOL Workbench, Version 4.0
v IBM VisualAge C++ for Windows, Version 3.5
v Microsoft Visual C++ for Windows 95/ NT, Version 4.0 and Version 5.0
54 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Components for Windows 95 and Windows 98
Components for Windows 95 and Windows 98
MQSeries Client
The MQSeries client code for Windows 95 and Windows 98.
MQSeries Toolkit
This includes:
v Sample programs
v Header files that you can use when writing applications to run on
the client
Windows NT Client: Hardware and Software Required
This section outlines the hardware and software requirements for an MQSeries
client for Windows NT.
Hardware
An MQSeries client can run on Windows NT on any Intel® 486 processor
based IBM PC machine or equivalent (certified as NT compatible). There must
be enough random access memory (RAM) and disk storage for the
programming prerequisites (below), the MQSeries client, the access methods,
and the application programs.
Software
The following are prerequisites for MQSeries applications running on a
Windows NT client.
Minimum supported software levels are shown. Later levels, if any, will be
supported unless otherwise stated.
v Microsoft Windows NT, Version 4 compatible, to include TCP/ IP, NetBIOS,
SNA LU 6.2, and SPX.
Connectivity
v IBM Communications Server for Windows NT, Version 5.0
v Attachmate Extra! Personal Client, Version 6.1 and Version 6.2
v Microsoft SNA Server, Version 2.11 or Version 3
v TCP/ IP, NetBIOS, and SPX are part of the base operating system
Optional software
v IBM DCE, Version 1.1
Compilers for MQSeries Applications on Windows NT Clients
The following compilers are supported:
v IBM VisualAge COBOL for Windows NT, Version 2.1
v IBM VisualAge COBOL Enterprise, Version 2.2
v IBM VisualAge C++, Version 3.5
Chapter 6. Planning to Install MQSeries Clients 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware and Software, Windows NT
v Microsoft Visual C++ for Windows 95 and Windows NT, Version 4.0 and
Version 5.0
v IBM C and C++ compilers, Version 3.6
v IBM PL/ I for Windows, Version 1.2
v IBM VisualAge for PL/ I for Windows
v IBM VisualAge PL/ I Enterprise, Version 2.1
v IBM Visual Basic for Windows, Version 4.0 (16-bit) and Version 5.0 (32-bit)
or higher
v IBM VisualAge for Java, e-Business Edition for Windows 95 and Windows
NT
v IBM VisualAge Java Enterprise Edition, Version 2.0
v IBM VisualAge Java Professional Edition, Version 2.0
Components for Windows NT
These are identical to those for OS/ 2 Warp. See “Components for OS/ 2 Warp”
56 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7. Installing MQSeries Clients
This chapter describes the following:
Installing MQSeries Clients on the Same Machine as the Server
To install MQSeries client components on an MQSeries server machine, use
the MQSeries Server CD-ROM (not the MQSeries Client CD-ROM). Choose
the client install option to install client components from the MQSeries Server
CD-ROM.
Use the MQSeries Client CD-ROM only to install MQSeries client components
on a machine that is not an MQSeries server.
You may install client components from the MQSeries Client CD-ROM and
later decide to install the MQSeries server on the same machine. Before you
can do this, you must remove all the MQSeries client components from the
machine. Then use the MQSeries Server CD-ROM to install the server and the
client. You cannot install the server on a machine that already has client
components installed from the MQSeries Client CD-ROM.
Remember that even when your server and client both reside on the same
machine, you still need to define the MQI channels between them. See the
MQSeries Clients book for details.
Installing on AIX
To install an MQSeries client on an AIX system, use the MQSeries Client
CD-ROM supplied as part of the MQSeries product.
© Copyright IBM Corp. 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Installing on AIX
The MQSeries client is installed into the /usr/mqm directory. This cannot be
changed. However, if you do not have enough space in the /usr/mqm file
system, follow the procedure given in “Creating Another File System for the
If you have a previous version of the MQSeries for AIX client installed on
your system, or if a file system remains from a previous AIX client
If you plan to install an MQSeries client and server on the same machine, see
Before Installation
Before you can install the MQSeries client on your AIX system you are
advised to create and mount a /var/mqm file system, or /var/mqm,
/var/mqm/log, and /var/mqm/errors file systems.
If you create separate partitions, the following directories must be on a local
file system:
v /var/mqm
v /var/mqm/log
You can choose to NFS mount the /var/mqm/errors directory to conserve
space on your local system.
A user ID with the name mqm, whose primary group is mqm, is automatically
created during installation. You can create the user and group IDs yourself
do this before installing the client. User ID and group must both be mqm.
For stand-alone machines, you can create the new user and group IDs locally.
For machines administered in a network information services (NIS) domain,
you can create the user and group IDs on the NIS master server machine.
After installation, the mqm user ID owns the directories and files that contain
the resources associated with the product. This group and user must be
defined for any machine on which the MQSeries software is to be installed,
whether the machine is a client or a server machine.
58 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on AIX
Creating Another File System for the Client
If you do not want to have the client installed in the /usr/mqm file system,
you can do either of the following things:
1. Create a new file system and mount it as /usr/mqm.
or
2. Create a new directory anywhere on your machine that is large enough to
contain the client files, and create a symbolic link from /usr/mqm to this
new directory. For example:
mkdir /bigdisk/mqm
ln -s /bigdisk/mqm /usr/mqm
Whichever of these options you choose, you must do it before installing the
client.
The file system into which the client is installed can be a remote network
device, for example NFS, provided that the mount options are defined on that
device to allow setuid programs (including root access) to be run.
Creating the mqm User ID and Group
If you want to create the required IDs yourself, follow this procedure before
you install the client. You must create both user ID and group as mqm.
Create the new IDs using the System Management Interface Tool (SMIT), for
which you require root authority. The procedure for this, if you use the SMIT
windows, is:
1. Create the mqm group. You can display the required window using this
sequence:
Security & Users
Groups
Add a Group
You can take the default values for the attributes of the new group or
change them as required.
2. Create the new user, mqm. You can display the window for doing this using
this sequence:
Security & Users
Users
Add a User
Set the primary group for this user to be mqm. You can take the default
values for the attributes of the new group or change them if you wish.
Chapter 7. Installing MQSeries Clients 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on AIX
3. Add a password to the new user ID. You can display the window for
doing this using this sequence:
Security & Users
Passwords
4. Add the newly created group mqm to an existing user ID. You can display
the window for doing this using this sequence:
Security & Users
Users
Change / Show Characteristics of a User
When the window is displayed, enter the name of the user who is to have
the mqm group added. In the user details window, add mqm to the Group
set field, which is a comma-separated list of the groups to which the user
belongs.
Note: You need not have your primary group set to mqm. As long as mqm is in
your set of groups, you can use the commands. If you are running
applications that use the queue manager only, you do not need mqm
group authority.
Easy Installation
This section describes the ‘Easy Installation’ procedure using the MQSeries
Client CD-ROM.
Note: If you have a previous version of the MQSeries for AIX client installed
on your system, or if a file system remains from a previous AIX client
1. Log on as root.
2. Insert the MQSeries Client CD-ROM into the CD-ROM drive.
3. Type xinstallm -ez
Note: xinstallm is part of VSM (Visual System Management), which may
not be installed on your system. It is part of the xll.vsm.rte fileset.
You can use SMIT or the underlying installp command as
alternatives.
The MQSeries Welcome window is displayed.
4. Make sure you are installing the correct client for your system, as
displayed in the Welcome window.
A window is then displayed where you can make some choices.
5. Choose the software source: CD-ROM.
6. For Which bundle of software would you like to install? choose:
Media-defined.
60 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on AIX
7. Click on Install/Update.
A bundle of software products is created:
mqm.Client
8. Choose the mqm.Client bundle and click on Install/Update again.
A work in progress window gives information as the installation proceeds.
9. At the end of installation you can click on the View log button and scroll
to the bottom of the log to see the filesets that have been installed
successfully.
Custom Installation
This section describes custom installation using the System Management
Interface Tool (SMIT).
Note: If you have a previous version of the MQSeries for AIX client installed
on your system, or if a file system remains from a previous AIX client
You can use SMIT for a custom installation as follows:
1. Log on as root.
2. Go into SMIT and from the shell, type:
smit
3. Select the device appropriate for your installation, using this sequence of
windows:
Software Installation and Maintenance
Install and Update Software
Install and Update from Latest Available Software
Alternatively, you can use the fastpath command:
smitty install_latest
4. Press the List button to display the Single Select List window.
5. Select /dev/cd0 (CD-ROM Drive)
6. Press Do to display the parameters for Install Latest Level.
7. Press F4 to get a list of components to install.
8. Follow the SMIT instructions to select the components you want to
install.
9. Press Enter.
10. If you have a previous version of the product on your machine, change
the Auto Install prerequisite software to No and Overwrite existing
version to Yes.
11. Press Do to install.
Chapter 7. Installing MQSeries Clients 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on AIX
Migrating from an Earlier Version of MQSeries for AIX
If you want to migrate from an MQSeries for AIX V5.0 client to an MQSeries
for AIX V5.1 client, you must first end all MQSeries activity on the target
machine, and remove any shared resources that are used by MQSeries. Do
this either by shutting down the system and restarting it, or by issuing the
icprm command to remove the shared resources.
The migration procedure described in this section applies only to migration
from MQSeries for AIX V5.0 clients to MQSeries for AIX V5.1 clients. If you
are migrating from an earlier version of MQSeries for AIX, you are advised to
uninstall your current version before installing the MQSeries for AIX V5.1
client.
Migration from MQSeries for AIX V5.0 involves updating any currently
installed filesets, and installing any new filesets that might be required.
To update currently installed filesets:
1. Go into SMIT for root authority. From the shell, enter:
smit
2. Select the device appropriate for your installation using the following
sequence of windows:
Software Installation and Maintenance
Install and Update Software
Update Installed Software to Latest Level (Update All)
Alternatively, you can use the fastpath command to select the appropriate
device:
smitty update_latest
3. Select the List button to display the Single Select List window.
4. Select /dev/cd0 (CD-ROM Drive).
5. Select OK to display the parameters for Update All.
6. Update all previously installed software for MQSeries by selecting the
_update_all option in the Software to update field.
7. Press Enter.
8. Select OK in the confirmation window to start updating the software.
Once all previously installed filesets have been updated to the latest level, you
more information.
Changes to the Installation Path
Changes in AIX LPP Version 4 packaging mean that the MQSeries for AIX
V5.1 client installs into directory /usr/mqm, whereas previous versions of the
product installed into directory /usr/lpp/mqm.
62 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on AIX
Installation of the MQSeries for AIX V5.1 client will fail if a file system
mounted as /usr/lpp/mqm is detected. If you are migrating from an earlier
version and a file system exists for this directory, you will need to do one of
the following things before installing the MQSeries for AIX V5.1 client. Either:
v Uninstall your existing MQSeries client, and either delete the file system or
move it to the new install path of /usr/mqm
or
v Move the old file system of /usr/lpp/mqm to the new installation path of
/usr/mqm and create a symbolic link from the old path to the new by
issuing the following command:
ln -s /usr/mqm /usr/lpp/mqm
If you uninstall your existing client and either delete or move your existing
file system, you can then install the MQSeries for AIX V5.1 client as described
However, if you move the old file system to the new installation path, you
should then perform the migration installation described in “Migrating from
Note: If you have already symbolically linked a file system to /usr/lpp/mqm,
installation of the MQSeries for AIX V5.1 client will destroy the
contents of the file system and the symbolic link, leaving an empty file
system. If this happens, you are advised to uninstall your existing
MQSeries client and either delete the file system or relink it to the new
install path of /usr/mqm, before installing the MQSeries for AIX V5.1
client.
The installation process for the MQSeries for AIX V5.1 client creates a
symbolic link from the old install path (/usr/lpp/mqm) to the new install path
(/usr/mqm). Therefore any existing scripts or makefiles that reference the old
path are still valid.
Changing the National Language
The easy installation and the custom installation default to the national
language that was specified when your operating system was installed.
It is possible to install the MQSeries client software so that the online help
and messages are in another national language. Use SMIT as follows to install
the message catalog for another national language:
1. Type smit
2. Follow this sequence of windows:
Chapter 7. Installing MQSeries Clients 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on AIX
Software Installation and Maintenance
Install and Update Software
Install and Update from ALL Available Software
3. Press the List button to display the Single Select List window.
4. Select:
/dev/cd0 (CD-ROM Drive)
5. Press the List button on the Software to Install field.
6. Select the message catalog that you want to install.
7. Press Do to install the chosen message catalog or catalogs.
To check the initial locale setting for your machine type:
smitty mle_cc_cust_hdr
and press Enter. If this is not one of the national languages provided by
MQSeries, you must select a national language, otherwise you will not get a
message catalog installed on your system.
Translated Messages
Messages in U.S. English are always available. If you require one of the other
languages that is supported by MQSeries for AIX, you must ensure that your
NLSPATH environment variable includes the appropriate directory.
For example, to select messages in German use the following:
export LANG=de_DE
export NLSPATH=/usr/lib/nls/msg/%L/%N
Removing an MQSeries Client from AIX
Use SMIT as usual to remove all the MQSeries client files that were installed.
Installing on DOS
To install an MQSeries client on a DOS system you use the MQSeries Client
CD-ROM supplied as part of the MQSeries product.
Using Setup
1. Insert the MQSeries Client CD-ROM into the CD-ROM drive.
2. Change to the DOS directory on the CD-ROM drive.
3. Copy the setup.exe file from the DOS directory to the directory where you
want to install the MQSeries client, for example c:\ mqmdos.
4. Change directory to c:\ mqmdos and type the command:
setup -d
This results in a self-exploding file being run to generate a tree of
subdirectories containing the DOS client.
64 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on DOS
5. Edit the autoexec.bat file using a suitable editor. If the PATH statement
exists, add the following to it:
c:\mqmdos;c:\mqmdos\bin;c:\mqmdos\en_us
If the PATH statement does not exist, add the following line to the
autoexec.bat file.
SET PATH=c:\mqmdos;c:\mqmdos\bin;c:\mqmdos\en_us
Removing an MQSeries Client from DOS
Delete all the files in the directory where you installed the MQSeries client,
and then remove the directory.
Installing on HP-UX
To install an MQSeries client on an HP-UX system you use the MQSeries
Client CD-ROM supplied as part of the MQSeries product.
Note: If you plan to install an MQSeries client and server on the same
The MQSeries client is installed into the /opt/mqm directory. This cannot be
changed.
Before Installation
Before you can install an MQSeries client on your HP-UX system you:
v Must create a group with the name mqm.
v Must create a user ID with the name mqm.
v Are recommended to create and mount a /var/mqm file system, or /var/mqm,
/var/mqm/log, and /var/mqm/errors file systems.
If you create separate partitions, the following directories must be on a local
file system:
– /var/mqm
– /var/mqm/log
You can choose to NFS mount the /var/mqm/errors and /var/mqm/trace
directories to conserve space on your local system.
After installation, this user ID (mqm) owns the directories and files that
contain the resources associated with the product. This group and user must
be defined for any machine on which the MQSeries software is to be installed,
whether the machine is a client or a server machine.
Chapter 7. Installing MQSeries Clients 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on HP-UX
For stand-alone machines, you can create the new user and group IDs locally.
For machines administered in a network information services (NIS) domain,
you can create the user and group IDs on the NIS master server machine.
Installation
Use the HP-UX swinstall program, or use SAM, after mounting the CD-ROM.
For further details, see the appropriate HP-UX documentation.
If you are using HP-UX V10.x, the depot to use is in the
HPUX10/MQS510.000.V10 file under the mount point. If you are using HP-UX
V11.x, the depot to use is in the HPUX11/MQS510.000.V11 file under the mount
point.
If the files on your CD-ROM appear in uppercase with a “;1” suffix, use this
name for the depot.
Kernel Configuration
See the MQSeries family Web site for a SupportPac™ that gives additional
Translated Messages
Messages in U.S. English are always available. If you require one of the other
languages that is supported by MQSeries for HP-UX, you must ensure that
your NLSPATH environment variable includes the appropriate directory.
For example, to select messages in German use the following:
export LANG=de_De.iso88591
export NLSPATH=/usr/lib/nls/msg/%L/%N
Removing an MQSeries Client from HP-UX
To remove an MQSeries client from your HP-UX system, use the swremove
command, or use SAM. You can then delete the / var/ mqm directory tree.
Installing on OS/2 Warp
To install an MQSeries client on an OS/ 2 Warp system you use the MQSeries
Client CD-ROM supplied as part of the MQSeries product.
Note: If you plan to install an MQSeries client and server on the same
Server” on page 57. If you currently have a manually installed
MQSeries client on your OS/ 2 Warp system from a previous release of
MQSeries, you must delete it manually before attempting to install the
Version 5.1 client. Before you delete the previous version, save your
MSQ.INI file because the deletion process will delete this file.
66 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on OS/2 Warp
You can install the version of the MQSeries client software specific to your
national language. This means that the installation program, online help and
messages will be in your national language.
Installation
Online help is available by selecting the Help push button or by pressing PF1.
Before you start, make sure that you have at least 150 KB of free space on the
drive containing the operating system. This is required by the installation
program.
1. Open an OS/ 2 Warp window (or start a full-screen session).
2. Insert the CD-ROM and change to the CD-ROM drive. Access the drive
and directory containing the installation program if you are installing
from a remote drive.
3. At the command prompt, in the root directory, type INSTALL, then press
Enter.
4. On the MQSeries Language Selection panel, select the language of your
choice, and click on the OK button or press Enter.
The MQSeries Welcome panel is displayed. Make sure you are installing
the correct client for your system, OS/ 2 Warp, as displayed in the
Welcome panel.
5. The install panel is then displayed. Select the Update CONFIG.SYS
check box if you want your CONFIG.SYS file updated automatically as
part of the installation process. Your original CONFIG.SYS file is renamed
to CONFIG.BAK and is stored in the same directory. If you do not select
this check box, a CONFIG.ADD file is generated. This file is a copy of
CONFIG.SYS with the necessary updates to the LIBPATH and PATH
statement. You can rename the CONFIG.ADD file to CONFIG.SYS.
6. Select the OK push button to continue. The Install - directories panel is
displayed.
7. The list box shows the installation options that you can select. When you
select one or more of these options, the Bytes needed field shows the
amount of disk space required for installation.
The component MQSeries Client for Java should be installed only if you
have Java 1.1.1 (or later compatible) runtime code on your machine. This
component must be installed on an HPFS formatted drive.
8. If there is not enough space on your hard disk to install all the
components, select an option that uses less disk space. If there is too little
space on your hard disk for any of the MQSeries for OS/ 2 installation
options, a dialog box appears before the Install - directories panel. In
this case, cancel the installation by selecting the OK push button. Find
out which of your existing files you can archive or delete to make more
space before proceeding further.
Chapter 7. Installing MQSeries Clients 67
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on OS/2 Warp
Use the push buttons as necessary:
v To display descriptions of the selected options, select Descriptions.
v To select all of the options, select Select all.
v To deselect all of the options, select Deselect all.
The Work and File Directory field allows you to specify a drive and
directory other than the default for the installation files (File directory)
and for the working files that might be created when you use the
MQSeries client (Working directory).
Select a drive from the list box if required. When you return to the
Install - directories panel, your selected drive is shown. Select the OK
push button to return to the Install - directories panel.
9. Select the Install push button to continue. The Install-progress panel is
displayed. This panel shows:
v The file currently being installed (source) and the drive and directory
to which it is being installed (target).
v A progress bar, indicating the percentage of files already unpacked and
installed.
v The elapsed time.
v The status; for example, unpacking, processing, or transferring.
If you select the Stop push button, you are asked whether you want to
delete the partial system you have installed. Select Yes to delete the files
already installed and return to the introductory panel. Select Start install
from the File menu to start the installation again.
10. A cyclic redundancy check (CRC) is performed on the installed software
and any errors are written to a log file. This is the file specified by the
/ L1 parameter of the INSTALL command by default. If / L1 is not
specified, the log file is MQMERR.LOG in the high-level directory chosen
for installation.
Note: The log files must be on a local drive. If the product has been
installed on a remote drive, change the path of the log files in the
mqs.ini file.
11. When installation is complete, the Installation and Maintenance panel is
displayed. Select OK. The introductory MQSeries for OS/ 2 panel is then
displayed. Leave the installation program by selecting the Exit push
button.
12. When the installation process is complete, a folder is created on the OS/ 2
Warp desktop, containing objects as follows:
READ.ME
MQSeries Installation and Maintenance
MQSeries Information
68 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on OS/2 Warp
Note that the MQSeries client is a set of services and it does not have to
be explicitly run. Therefore the folder does not have an object called a
“client”.
13. Remove the installation CD-ROM from the drive.
14. If your CONFIG.SYS file has been updated, shut down the system and
restart. If the CONFIG.SYS file was not updated, rename the
CONFIG.ADD file to CONFIG.SYS before shutting down the system
(CONFIG.ADD will be in the same directory as CONFIG.SYS).
15. To obtain MQSeries messages in the correct language two environment
variables must be set correctly. The installation process sets the
environment variable NLSPATH including <installation
directory>\ LOCALE\ %L\ %N, where <installation directory> is the
directory in which you choose to install the product. You must set the
environment variable LANG=<lang>, where <lang> is the subdirectory in
which the message catalog for your language is installed, selecting a
language from the list below:
Directory
En_US
Pt_BR
Fr_FR
Language
U.S. English
Brazilian Portuguese
French
De_DE
It_IT
German
Italian
Ja_JP
Japanese
Ko_KR
Es_ES
Zh_CN
Zh_TW
Korean
Spanish
Simplified Chinese
Traditional Chinese
Unattended Installation on OS/2 Warp
You can install MQSeries clients on OS/ 2 Warp workstations without user
interaction being required at the workstation. You can perform this
unattended installation using response files. The sample response file
AMQISMC2.RSP shows an example of unattended client installation.
This kind of automatic installation is particularly useful for installing clients
over a network because installation can be performed from a redirected drive
on a LAN server.
Chapter 7. Installing MQSeries Clients 69
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on OS/2 Warp
Attention
Note that the INSTALL.EXE file in the root directory of the CD-ROM
must not be used to perform unattended installations.
You must instead invoke the INSTALL.EXE file located in the directory
corresponding to the language version of the product that you want to
install.
Starting Unattended Installation
The following steps describe how to perform an unattended installation:
1. Connect to the drive containing the MQSeries product software. This can
be a local CD-ROM drive containing the MQSeries client CD, or a remote
network drive. For example, F:.
2. Change to the directory appropriate to your language. The directories are
as follows:
Directory
Language
\ OS2\ En_Us
\ OS2\ Pt_BR
\ OS2\ Fr_FR
\ OS2\ De_DE
\ OS2\ It_IT
U.S. English
Brazilian Portuguese
French
German
Italian
\ OS2\ Ja_JP
Japanese
\ OS2\ Ko_KR
\ OS2\ Es_ES
\ OS2\ Zh_CN
\ OS2\ Zh_TW
Korean
Spanish
Simplified Chinese
Traditional Chinese
3. Change to the subdirectory samples.
4. Edit the supplied response file, AMQISMC2.RSP for client installation, or
create a new response file. The supplied response file can be used for
install and delete actions.
5. Type install together with the required parameters (described in
INSTALL /A:I /R:J:\INSTMQS\AMQISMC2.RSP
/S:J:\INSTMQS\en_us
/L1:J:\INSTMQS\MQM.OUT
/L2:J:\INSTMQS\MQM.HIS /X
This example uses U.S. English. To use another language, substitute en_us
with the directory appropriate to your language. When you issue this
70 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on OS/2 Warp
command, you must type it as one continuous line. In the example above,
for clarity, the command is spread over several lines.
In this example, the MQSeries client is installed from the redirected drive J: on
the server, according to the options supplied in the response file
AMQISMC2.RSP. Note that drive J: must be a writeable drive that you must
create, and the .RSP file must be put on that drive. The installation log files
will also be created on the J: drive. The response file specifies the drive and
directory in which to install the client. Errors are logged in MQM.OUT and
the history log is contained in MQM.HIS. The / X parameter specifies that the
installation is non-interactive.
The example also shows that you must have the INSTALL.EXE available to
your system. This file is supplied on the client CD-ROM, but is not installed
onto your system. You must make a copy of this file available when you
perform maintenance updates on your system.
Installation and Maintenance Parameters
The installation and maintenance parameters are as follows:
INSTALL /A:action
/G:include path
/L1:error log
/L2:history log
/R:response file
/S:source location
/T:install target directory
/TU:update CONFIG.SYS directory
/X
Note: You can enter the parameters in any order. Equals signs (=) can be used
instead of colons (:) in the parameters. Values can be upper or lower
case.
/A:action
Specifies the action to be performed by the installation program. If you
specify this parameter, the main window of the installation program is not
displayed. Valid values for action are:
D
I
Delete an installed MQSeries for OS/ 2 Warp system
Install a new MQSeries for OS/ 2 Warp system
R
U
Restore a backed up MQSeries for OS/ 2 Warp system
Update an installed MQSeries for OS/ 2 Warp system
Note: The installation program is not supplied with a corrective service
medium. Therefore, if you are updating, restoring, or deleting an
MQSeries for OS/ 2 Warp system, you must have access to the
installation program used to install it.
Chapter 7. Installing MQSeries Clients 71
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on OS/2 Warp
/G:include path
Specifies the drive and path of a general response file to be included by
the specific response file. For more information about response files, see
/L1:error log
Specifies the drive, path, and file name of the error log file. The error log
contains messages associated with installation, including confirmations
and error messages. Messages are written to the error log if you specify
the / X parameter.
You should specify the drive and path where the installation program is
running. If you do not specify the / L1 parameter, no error log is
maintained. If the error log already exists, it is appended to.
Example:
/L1:D:\LOG\INSMQM.OUT
/L2:history log
Specifies the drive, path, and file name of the history log file. The history
log contains an entry for each file transferred, each object created, and
each installation exit run.
You should specify the drive and path where the install program is
running. If you do not specify the / L2 parameter, no history log is
maintained. If the history log already exists, it is appended to.
Example:
/L2:D:\LOG\INSMQM.HIS
/R:response file
Example:
/R:L:\MQMINS\AMQISAM2.RSP
/S:source location
Specifies the drive and path containing the source files to be installed or
updated.
/T:install target directory
Specifies the drive and path that MQSeries for OS/ 2 Warp files are
installed on to. If you specify this parameter, it overrides the FILE path,
which must be specified in the response files.
/TU:update CONFIG.SYS directory
Specifies the drive and path of the target CONFIG.SYS to be updated.
/X Specifies that the installation is fully automatic.
72 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on OS/2 Warp
When you specify this parameter, no progress indicator panel is shown
and error messages are logged in the error log file. (You specify the path
name of the error log file using the / L1 parameter.) If you do not specify
all of the information required for the action to complete, an error occurs.
If you do not specify the / X parameter, the user is prompted for any
information that the install program needs to complete the action. In this
interactive mode of operation, progress indication is shown and error
messages are displayed in secondary windows.
Installation Response Files
An installation response file is an ASCII text file containing answers to the
options that you select when you install or maintain an MQSeries for OS/ 2
Warp system. This allows installation and maintenance to be performed
automatically, without interaction.
In an installation response file you can specify:
v Whether CONFIG.SYS should be updated automatically
v The MQSeries for OS/ 2 Warp components to be installed
v The path for installation or maintenance
v Whether existing files should be overwritten
v Whether only backup versions of MQSeries for OS/ 2 Warp should be
deleted
The installation response file supplied with MQSeries for OS/ 2 Warp can be
found as a sample file on the installation media. You can use this file to install
or delete MQSeries for OS/ 2 Warp. To perform other actions you must
prepare your own installation response files using a suitable editor.
Normally you have only one response file, specified by the / R parameter of
the installation program. However, if you need to install or update MQSeries
for OS/ 2 Warp on a workstation with different options, you can use two files.
One would be a specific response file that contains options specific to a
particular workstation, and the other a general installation response file that
contains options common to all workstations.
For example, you might use a general and a specific response file to install a
particular component only on some workstations.
You use the / R parameter to specify the specific installation response file, and
the / G parameter to specify the location of the general response file.
Keywords for Response Files
The following keywords are supported in response files for MQSeries for
OS/ 2 Warp:
Chapter 7. Installing MQSeries Clients 73
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on OS/2 Warp
CFGUPDATE
Specifies whether CONFIG.SYS is updated automatically. Valid values
for this keyword are:
AUTOAutomatically updates CONFIG.SYS
MANUALDoes not update CONFIG.SYS
Actions: INSTALL, UPDATE, DELETE.
COMP
Specifies the name of a component on which to perform an action. See
the server or client component lists for valid values.
You do not need to enclose the product names within quotes.
Actions: ALL actions.
DELETEBACKUP
Specifies whether to delete only the backup version of MQSeries for
OS/ 2 Warp or the entire product. Valid values are YES and NO.
When you remove MQSeries for OS/ 2 Warp, none of your
user-supplied information, for example queue manager data, is
deleted. This is particularly important if you intend to delete and
reinstall the product, because your previous queue manager data will
remain.
This can lead to an unexpected directory and file structure, if you
attempt to recreate queue managers with identical names to those
used in the previous installation, because such data might already be
present.
Actions: DELETE.
FILE Specifies the drive and directory for MQSeries for OS/ 2 Warp code.
For example the C:\ MQM directory.
Actions: INSTALL.
WORK
Specifies the drive and directory for MQSeries data files. For example
the C:\ MQM directory.
Actions: INSTALL.
INCLUDE
Specifies which general response files to include with a specific
response file. The format of this keyword is:
INCLUDE = filespec
Where filespec specifies the general response file to be included. If
the file specification contains any global characters (* or ?), the first
74 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on OS/2 Warp
file found that matches the specification is included. If the
specification is not valid, no general response file is included.
Note: You should not have more than five levels of included response
files.
Actions: All actions.
OVERWRITE
Specifies whether to overwrite files automatically during installation.
Valid values for this keyword are YES and NO.
Actions: INSTALL, UPDATE.
SAVEBACKUP
Specifies whether to save a backup version of MQSeries for OS/ 2
Warp when it is updated. Valid values for this keyword are YES and
NO.
Actions: UPDATE.
Response File Structure
There are two kinds of line in a response file:
v Comment lines
Comment lines are either blank or start with an asterisk (*) or a semicolon
(;).
v Response lines
Response lines are used to determine the options and configurations to
install on the target system. Response lines have the following syntax:
keyword = value
Keyword-value pairs can be in any order. However, there can be only one
pair per line. You can enter keywords in upper or lower case letters. You
cannot include spaces within keywords.
The maximum line length in a response file is 255 characters.
Removing an MQSeries Client from OS/2 Warp
Use the MQSeries Installation and Maintenance icon in the MQSeries Client
folder on the desktop, and select Actions/ Delete. All the MQSeries client files
that were there at the time of installation are deleted.
Installing on Sun Solaris
To install an MQSeries client on a Sun Solaris system you use the MQSeries
Client CD-ROM supplied as part of the MQSeries product.
Chapter 7. Installing MQSeries Clients 75
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Sun Solaris
Note: If you plan to install an MQSeries client and server on the same
The MQSeries product is installed into the /opt/mqm directory. This cannot be
changed.
Before Installation
Before you can install an MQSeries client on your Sun Solaris system you:
v Must create a group with the name mqm.
v Must create a user ID with the name mqm.
v Are recommended to create and mount a /var/mqm file system, or /var/mqm,
/var/mqm/log, and /var/mqm/errors file systems.
If you create separate partitions, the following directories must be on a local
file system:
– /var/mqm
– /var/mqm/log
You can choose to NFS mount the /var/mqm/errors and /var/mqm/trace
directories to conserve space on your local system.
After installation, this user ID (mqm) owns the directories and files that contain
the resources associated with the product. This group and user must be
defined for any machine on which the MQSeries software is to be installed,
whether the machine is a client or a server machine.
For stand-alone machines, you can create the new user and group IDs locally.
For machines administered in a network information services (NIS) domain,
you can create the user and group IDs on the NIS master server machine.
Installation
Carry out the following procedure:
1. Check whether Volume Manager is running on your system by typing the
following command:
/usr/bin/ps -ef | /bin/grep vold
If it is running, the CD is mounted on / cdrom/ mqclient automatically. If it
is not running, mount the CD by typing the following commands:
mkdir -p /cdrom/mqclient
mount -F hsfs -r /dev/dsk/cntndnsn /cdrom/mqclient
substituting cntndnsn with the name of your CD-ROM device.
2. Use the Sun Solaris pkgadd program to install the MQSeries client
software by carrying out the following procedure:
a. Type pkgadd -d /cdrom/mqclient/solaris/mqs510.img.
76 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Sun Solaris
b. You are prompted for a list of components to be installed. Select the
ones you require - if you want to install all the components, select all.
The component MQSeries Client for Java should be installed only if
you have Java 1.1.1 (or later compatible) runtime code on your
machine. You also require Version 2.6 or later of the Sun Solaris
operating system.
c. Press the Enter key.
For further information on using pkgadd to install software packages, see the
Sun Solaris documentation.
Kernel Configuration
See the MQSeries family Web site for a SupportPac that gives additional
Translated Messages
Messages in U.S. English are always available. If you require one of the other
languages supported by MQSeries for Sun Solaris, you must ensure that your
NLSPATH environment variable includes the appropriate directory.
For example:
export LANG=de
export NLSPATH=/usr/lib/locale/%L/LC_MESSAGES/%N
Removing an MQSeries Client from Sun Solaris
If you have previously installed MQSeries on your system, you must remove
the product using the pkgrm program.
If the product is present, but not installed correctly, you might need manually
to delete the files and directories contained in:
/var/mqm
/opt/mqm
Installing on Windows 95 or Windows 98
To install an MQSeries client on a Windows 95 or a Windows 98 system you
use the MQSeries Client CD-ROM supplied as part of the MQSeries product.
If you plan to install an MQSeries client and server on the same machine, see
Note: The client installation will fail if the PATH variable that has been set up
is greater than 267 characters long.
Chapter 7. Installing MQSeries Clients 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Windows 95 or 98
Installation
1. Insert the MQSeries Client CD-ROM into the CD-ROM drive.
2. The installation automatically starts and an MQSeries Language Selection
window is displayed.
Note: If you have disabled auto-playing of CD-ROMs, run SETUP
instead, from the root directory.
This window presents you with a list of the national languages that are
available.
3. On the MQSeries Language Selection window select the language of your
choice, and click on the Next button or press Enter.
The MQSeries Welcome window is displayed.
4. Make sure you are installing the correct client for your system, as
displayed in the Welcome window.
5. Select Destination Directory requires a destination directory into which
the MQSeries files will be installed.
You can change the default shown by selecting the browse button and
choosing a different drive and directory, then click on OK. Click on the
Next button or press Enter to continue.
6. Choose MQSeries Components displays a list of components from which
you can select the ones you want to be installed.
To select a component, click in the box next to it so that a check mark
appears (just highlighting the line does not select it). The space needed
for each component is shown here, and the space available on the drive
you have selected.
Click on the Next button or press Enter to continue.
7. Select Program Folder prompts you for a folder name to contain the
MQSeries objects. The default name is MQSeries Client for MQSeries
client for Windows 95 and Windows 98. You can rename the default or
choose an existing folder.
8. Start Copying Files displays all the selections you have made. Click on
the Back button if you want to return to a previous window to change
any of your choices.
When you have checked your choices, click on the Next button or press
Enter to start the file copying process.
The progress indicator shows which components are being copied and
the percentage of copying completed.
9. The next window presents you with the opportunity to view the
README file. If you do not want to view the README file at this point,
it will be available in the MQSeries client folder.
78 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Windows 95 or 98
If you view the README file, close the window of the README to
continue the installation process.
10. The installation of the MQSeries client is now complete, and a window is
displayed giving you the option of restarting your computer now or
leaving it until later. It is recommended that you restart your computer
now. Close all the other applications that are running before continuing
with this step.
Once this has been done, select Yes, I want to restart my computer now
and click on the Finish button to complete the setup.
11. When setup is complete, the MQSeries Client folder is added to the
desktop, or the location you specified. Note that the MQSeries client is a
set of services and it does not have to be explicitly run, so the folder does
not have an object called a “client”.
Unattended Installation on Windows 95 and Windows 98
You can install a Windows client on a remote machine without interaction.
This process is known as unattended installation, sometimes referred to as silent
installation, and uses response files.
An installation response file is an ASCII text file containing values for the
options that you select when you install an MQSeries for Windows system.
For unattended installation, you must:
1. Carry out an installation on a machine and record the actions performed
to install the product.
In this example, the machine is being used as a server – see “Setting up
2. Use the recording you have created to install the product on a remote
machine. See “Installing on the Remote Machine” on page 80.
Setting up the Server
To set up your server, follow these steps:
1. Load the MQSeries client CD-ROM. When the Language Selection window
appears, select Cancel.
2. Copy the win95 or win98 subdirectory, and all of its subdirectories, from
the client CD-ROM to a shared-resource image directory.
3. Select one of the following language directories:
v SetupCn – Simplified Chinese
v SetupDe – German
v SetupEn – English
v SetupEs – Spanish
v SetupFr – French
v SetupIt – Italian
v SetupJp – Japanese
Chapter 7. Installing MQSeries Clients 79
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Windows 95 or 98
v SetupKo – Korean
v SetupPt – Brazilian Portuguese
v SetupTw – Traditional Chinese
4. From the selected language directory, run setup.exe, with the -r option to
create a response file.
This can be done by:
a. Highlighting setup.exe
b. Dragging it to the Start, Run dialog
c. Adding -r to the end of the fully-qualified file name
d. Selecting OK to start the process
e. Selecting the components that you want to install
Notes:
a. When the installation has ended, a response file will have been
automatically generated that can be used as the basis for unattended
installation.
b. The response file SETUP.ISS will be generated in the WINDOWS
directory for Windows 95 or Windows 98.
5. When the response file has been generated, you can copy it to the
language dependent directory in the shared-resource image directory for
your national language.
For example, to copy the SETUP.ISS file from the WINNT35 directory to
\ IMAGE\ SETUPEN, type:
COPY C:\WINNT35\SETUP.ISS M:\INSTMQS\IMAGE\SETUPEN
where SETUPEN is the appropriate language directory for your system.
This assumes that the Windows 95 or 98 operating system was installed to
the C drive and that the MQSeries installation image on the server resides
on M:\ INSTMQS.
Now you have set up your server, you can go on to install on the remote
machine.
Installing on the Remote Machine
Unattended installation is particularly useful for installing a client over a
network because you can do it from a redirected drive on a LAN server.
The remote machine must have access to the shared-resource image directory,
which includes the:
v Appropriate language subdirectory
v Disk subdirectories
To connect the workstation to the redirected drive on the server, follow these
steps:
80 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Windows 95 or 98
1. Use the NET USE command as follows:
NET USE devicename \\servername\netname
For example:
NET USE J: \\MQMNT\MQMSHARE
where:
v J: is the logical drive name to be connected to the shared resource
directory.
v MQMSHARE is the netname for M:\ INSTMQS.
2. Go to the language directory that contains the SETUP.EXE and SETUP.ISS
files and run SETUP -s.
Notes:
1. The -s parameter indicates that the installation is to be carried out in silent
mode. This parameter is mandatory for an unattended installation.
2. SETUP.EXE uses the SETUP.ISS file in the current directory to silently
install the product.
Removing an MQSeries Client from Windows 95 and Windows 98
If you want to remove the MQSeries client files from your machine, use
Settings/ Control Panel/ Add-Remove Programs. First select MQSeries Client,
which launches the uninstall program. Then select the components you want
to remove and click Remove.
If you choose to remove all MQSeries components and are then likely to
reinstall MQSeries, you should restart your computer to complete the
uninstall process. You cannot reinstall any components until you have
restarted.
All the MQSeries client files that were created at installation time are removed
by the process.
Installing on Windows 3.1
To install an MQSeries client on a Windows 3.1 system you use the MQSeries
Client CD-ROM supplied as part of the MQSeries product.
Installation
1. Insert the MQSeries Client CD-ROM into the CD-ROM drive.
2. Open the directory WIN31.
3. Change to the appropriate language subdirectory for the language you
wish to install:
Chapter 7. Installing MQSeries Clients 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Windows 3.1
setupen - English
setuppt - Brazilian Portuguese
setupfr - French
setupde - German
setupit - Italian
setupjp - Japanese
setupko - Korean
setupes - Spanish
setupcn - Simplified Chinese
setuptw - Traditional Chinese
4. Run setup.exe
The MQSeries Welcome window is displayed.
5. Make sure you are installing the correct client for your system, Windows
3.1, as displayed in the Welcome window.
6. Select Destination Directory requires a destination directory into which
the MQSeries files will be installed.
You can change the default directory by selecting the browse button and
choosing a different drive and directory, then click on OK. Click on the
Next button or press Enter to continue.
7. Choose MQSeries Components displays a list of components from which
you can select the ones you want to be installed.
To select a component, click in the box next to it so that a check mark
appears (just highlighting the line does not select it). The space needed
for each component is shown here, and the space available on the drive
you have selected. Click on the Next button or press Enter to continue.
8. Select Program Folder prompts you for a folder name to contain the
MQSeries objects. The default name is MQSeries Client for Windows 3.1.
You can rename the default or choose an existing folder.
9. Start Copying Files displays the selection you have made. Click on the
Back button if you want to return to change your choice.
Now click on the Next button or press Enter to start the file copying
process.
The progress indicator shows what components are being copied and the
percentage of copying completed.
10. The next window presents you with the opportunity to view the
README file. If you do not want to view the README file at this point,
it will be available in the MQSeries client folder.
If you view the README file, close the window of the README to
continue the installation process.
11. The installation of the MQSeries client is now complete, and a window is
displayed giving you the option of restarting your computer now or
leaving it until later. It is recommended that you restart your computer
now. Close all the other applications that are running before continuing
with this step.
82 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Windows 3.1
Select Yes, I want to restart my computer now and click on the Finish
button to complete the setup.
12. When setup is complete, the MQSeries Client folder is added to the
Program Manager. Note that the MQSeries client is a set of services and
it does not have to be explicitly run, so the folder does not have an object
called a “client”.
Removing an MQSeries Client from Windows 3.1
If you want to remove the MQSeries client files from your machine, use the
process provided to do this efficiently.
Run Uninstall from the MQSeries client folder. You are prompted before
continuing.
All the MQSeries client files that were created at installation time are removed
by the process.
Installing on Windows NT
To install an MQSeries client on Windows NT, use the MQSeries Client
CD-ROM supplied as part of the MQSeries product.
Note: If you plan to install an MQSeries client and server on the same
Installation
To install an MQSeries client for Windows NT, you must be logged on to
Windows NT as an administrator.
MQSeries checks for any existing MQSeries configuration files (MQS.INI). If it
finds any, it automatically migrates configuration information to the Windows
NT registry. Otherwise, MQSeries automatically puts its configuration
information directly into the Windows NT registry.
Installation Procedure
1. Insert the MQSeries Client CD-ROM into the CD-ROM drive.
2. The installation automatically starts and an MQSeries Language Selection
window is displayed.
Note: If you have disabled auto-playing of CD-ROMs, run SETUP
instead, from the root directory.
This window presents you with a list of the national languages that are
available.
Chapter 7. Installing MQSeries Clients 83
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Windows NT
3. On the MQSeries Language Selection window select the language of your
choice, and click on the OK button or press Enter.
The MQSeries Welcome window is displayed.
4. Make sure you are installing the correct client for your system, as
displayed in the Welcome window.
5. Choose Installation Folders lets you choose folders into which the
MQSeries program files and data files will be installed.
You can change the default shown by selecting the browse button and
choosing a different drive and directory, then click on OK. Click on the
Next button or press Enter to continue.
6. Select Components displays a list of components from which you can
select the ones you want to be installed.
The component Java Client should be installed only if you have Java
1.1.1 (or later compatible) runtime code on your machine.
To select a component, click in the box next to it so that a check mark
appears (just highlighting the line does not select it). The space needed
for each component is shown on the panel, and the space available on
the drive you have selected.
If you deselect a previously installed component it is removed. Click on
the Next button or press Enter to continue.
7. Select Program Folder prompts you for a folder name to contain the
MQSeries objects. The default name is IBM MQSeries Client. You can
rename the default or choose an existing folder.
8. Ready to Copy Files displays all the selections you have made. Click on
the Back button if you want to return to a previous window to change
any of your choices.
When you have checked your choices, click on the Next button or press
Enter to start the file copying process.
The progress indicator shows which components are being copied and
the percentage of copying completed.
9. The Setup Complete window appears when the selected components
have been installed. Click the Finish button or press Enter to close the
window (after optionally selecting Launch Notepad to View the Release
Notes).
10. The installation of the MQSeries client is now complete.
11. When setup is complete, the IBM MQSeries folder is added to the Start
menu. Note that MQSeries Clients are sets of services and do not have to
be explicitly run, so the folder does not have an object called “client”.
84 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Windows NT
Installing from a LAN
There are two ways to put MQSeries installation files on a LAN file server for
easier access: you can make the MQSeries for Windows NT Client CD-ROM
drive shareable, or you can copy the installation files from the CD-ROM to a
file server, by following these steps:
1. Create a folder on the LAN file server to store the installation files. For
example:
md m:\instmqs
2. Load the MQSeries for Windows NT client CD-ROM. If you have autorun
enabled, the language selection panel will appear. Cancel this panel.
3. Copy the Winnt directory structure from the CD-ROM to the m:\ instmqs
folder. For example:
xcopy e:\Winnt\*.* m:\instmqs /e
You can save space on the hard drive by copying only the subfolders for
the languages that you require. The language subfolders are:
SetupCn
SetupDe
SetupEn
SetupEs
SetupFr
SetupIt
Simplified Chinese
German
U.S. English
Spanish
French
Italian
SetupJp
SetupKo
SetupPt
SetupTw
Japanese
Korean
Brazilian Portuguese
Traditional Chinese
4. Give all licensed users access to the folder that now contains the CD-ROM
image (in this example, the m: drive).
5. From a command prompt on the target machine, connect to the
appropriate drive and folder using the net use command:
net use devicename \\servername\netname
For example:
net use x: \\mqmnt\instmqs
where x: is the required mapped drive on the target machine.
Alternatively, use Windows NT Explorer or another method to map the
shared resource to a drive letter.
6. Change to the installation directory (in this example x), type Setup and
press Enter.
7. Follow the prompts.
Chapter 7. Installing MQSeries Clients 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Windows NT
Using the System Management Server with MQSeries for Windows NT
This section describes how to install, or remove, an MQSeries for Windows
NT client using the System Management Server (SMS).
Creating SMS Packages and Jobs for MQSeries
You must create:
v An SMS software package containing the MQSeries software.
For more detailed information on how to create a software package and a job,
refer to the Microsoft System Management Server documentation.
Creating the MQSeries SMS Software Package
To create the SMS software installation package:
1. From the Microsoft SMS Administrator application, open the Packages
folder and then create a new package.
2. In the SMS Package Properties dialog click on the Import button to
create the software package by importing a Package Definition File (PDF).
3. In the File Browser dialog, select the drive where the IBM MQSeries
client CD-ROM is located.
4. Select the Winnt directory, which contains the package definition file
MQSERIES.PDF.
You can also find the MQSERIES.PDF file in the local drive, or shared
network drive where you copied the MQSeries Installation software.
5. Select the MQSERIES.PDF file and click on the OK button.
6. Click on the Workstation button. In the Source Directory entry field,
specify the fully-qualified path name to the MQSeries root directory that
contains the MQSeries installation software.
7. Select the appropriate Workstation Command Line:
v Automated Uninstallation of IBM MQSeries - Windows NT client
v Automated Installation of IBM MQSeries - Windows NT client (US
English)
8. Click on the Properties button for each process and review the
Command Line entry field to ensure that the parameters are correct.
Note: The -i<miffilepath> parameter specifies the full path and file
name of a Management Information Format (.mif) file that
installation and uninstallation can generate. Remove the parameter
if you do not want to generate a .mif file.
9. Click on the Close button to close the Workstation Properties dialog.
86 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Windows NT
Note: If you specified a local path in the Source Directory entry field,
you get a pop-up dialog warning you that the local path you
specified might not be accessible to SMS components running on
another machine. Click on the OK button to continue.
10. Click on the OK button to close the Package Properties window.
A pop-up dialog appears indicating that SMS will update the software
package at all sites. Click the OK button to continue.
The software package has been created and can be installed by creating an
SMS job.
Creating the MQSeries SMS Job
You must now create an SMS job to distribute and install the software
packages you created that contain the MQSeries installation software.
Refer to the Microsoft System Management Server documentation for detailed
information on how to create and run a job.
Notes:
1. You must be logged onto the target machine with Administrator authority
in order to install the MQSeries Server.
2. When creating an SMS Job to distribute and install the software package,
ensure that you select the appropriate workstation command. The
workstation commands are displayed on the Job Details dialog in the Run
Phase section and appear in a drop-down list box.
Unattended Installation on Windows NT
You can install MQSeries for Windows NT on a remote machine without
interaction, provided that the remote machine can share the client CD-ROM,
or a copy of the files on it, and that you can execute a command on the
remote machine. This process is called unattended (or silent) installation, and
is particularly useful for installing MQSeries for Windows NT clients over a
network because you can do it from a shared drive on a LAN file server.
Because there is no user interaction, unattended installation uses a response
file. A response file is an ASCII text file containing values for the installation
options you want to select. For information on the format of response files,
see the MQSeries Clients book.
There are three ways to generate a response file:
1. Edit the response file (setup.iss) supplied in the Winnt directory on the
MQSeries for Windows NT client CD-ROM, using an ASCII file editor.
2. Generate your own response file using an ASCII file editor.
Chapter 7. Installing MQSeries Clients 87
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Windows NT
3. Carry out an installation on a machine and record the options selected to
install the product in a response file. To do this you must run setup.exe
with the -r parameter, and optionally, the -noinst parameter:
a. Load the MQSeries for Windows NT client CD-ROM. If you have
autorun enabled, the language selection panel will appear. Cancel this
panel.
b. Run setup.exe from the root folder of the CD-ROM, with the -r
parameter. This can be done by dragging setup.exe from Windows NT
Explorer to the Run dialog in the start menu and adding -r to the end
of the file name, or by typing the fully-qualified path to setup.exe into
the Run dialog, followed by -r.
c. The language selection dialog reappears. Perform an installation as you
want it performed on the remote machine.
d. If you are asked to restart the system, you do not need to do so if you
are only generating a response file.
The -noinst parameter (which, if present, must precede the -r parameter)
suppresses the MQSeries installation; Setup generates only a response file.
The installation creates a response file called setup.iss in the Windows
directory, normally c:\ winnt. Save this file; you can edit it if necessary.
Use the response file you have created to install the product on a remote
machine. (See “Installing on the Remote Machine”.)
Installing on the Remote Machine
The remote machine must have access to a shared resource or drive on a file
server that contains the client CD-ROM or a copy of it. Perform the procedure
run Setup. Copy your response file to a location on the file server that is
accessible from the remote machine. You can now start the installation on the
remote machine:
1. On the remote machine, go to the Setupxx folder on the shared resource.
2. Substitute Setupxx with the name of the language subfolder for the
language that you require.
3. Run setup.exe:
setup -g<logfile> -f1<responsefile> -f2<secondarylogfile> -s
This installs in the language specified by Setupxx.
In the above command:
<logfile>
The full path to an installation log file. Setup creates a U.S. English
ASCII text log file containing details of what happens during
installation. You should check this file to see if any errors occurred. If
88 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing on Windows NT
you omit the -g<logfile> parameter, Setup creates a file called
amqilogn.txt in the data-files folder on the machine running the
installation. In this case, any messages generated before the data-files
folder is created are lost. The -g<logfile> parameter must be placed
before the -f1 and the -s parameters, otherwise it is ignored.
<responsefile>
The full path to the response file you prepared. If you omit the
-f1<responsefile> parameter, the response file must be in the Setupxx
language subdirectory.
<secondarylogfile>
The full path to a secondary installation log file. This file contains less
detail than the other log file and should not be used as the primary
source for information about the success of the installation. If you
omit the -f2<secondarylogfile> parameter, Setup attempts to create a
file called setup.log in the language subdirectory (Setupxx), which is
not possible if the installation is being performed from a CD-ROM.
The -f2<secondarylogfile> parameter must be placed after the -f1
parameter.
-s
This parameter tells Setup to run in silent mode.
Enclose the long path name and file name expressions in double quotes.
Removing an MQSeries Client from Windows NT
If you want to remove the MQSeries client files from your machine, use
Settings/ Control Panel/ Add-Remove. First select IBM MQSeries Client,
which launches the install program. Alternatively, choose MQSeries
Uninstallation from the IBM MQSeries client folder. You can choose to
uninstall one or more components or the whole of the MQSeries client,
including or excluding data.
For more information on uninstalling an MQSeries for Windows NT client, see
the MQSeries Clients book.
Classes for Java
MQSeries classes for Java version 5.1.1 are available as a SupportPac from
http:/ / www.ibm.com/ software/ ts/ mqseries/ txppacs/ ma88
Instructions for installing the classes are given in the readme that accompanies
the SupportPac.
Chapter 7. Installing MQSeries Clients 89
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring a Client
Configuring and Verifying a Client
After you have installed the client, you need to configure your
communications and verify the installation. For information on how to do
this, see the MQSeries Clients book.
90 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8. Obtaining Additional Information
This chapter describes the documentation for MQSeries for AS/ 400, V5.1. It
starts with a list of the publications, and then discusses:
MQSeries for AS/ 400, V5.1 is described in the following books:
Table 4. MQSeries for AS/400 books
Order
Title
Description
Number
AS/400 Specific Books
GC34-5557
SC34-5558
MQSeries for AS/400
Quick Beginnings
Gives a brief overview of MQSeries for
AS/ 400, and provides information on
planning for, installing, and getting started
with the product.
MQSeries for AS/400
V5.1 System
Administration
Supports day-to-day management of local
and remote MQSeries objects. It includes
topics such as security, recovery and restart,
transactional support, problem
determination, and the dead-letter queue
handler.
GC34-5559
GC33-1349
MQSeries for AS/400
V5.1 Application
Programming Reference data-type descriptions; MQI call syntax;
Provides comprehensive reference
information for users of the MQI. It includes:
(ILE RPG)
attributes of MQSeries objects; return codes;
constants; and building information for RPG.
MQSeries Family Books
MQSeries Planning
Guide
Describes some key MQSeries concepts,
identifies items that need to be considered
before MQSeries is installed, including
storage requirements, backup and recovery,
security, and migration from earlier releases,
and specifies hardware and software
requirements for every MQSeries platform.
© Copyright IBM Corp. 2000
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Table 4. MQSeries for AS/400 books (continued)
Order
Title
Description
Number
SC33-1872
MQSeries
Intercommunication
Defines the concepts of distributed queuing,
and explains how to set up a distributed
queuing network in a variety of MQSeries
environments. In particular, it demonstrates
how to (1) configure communications to and
from a representative sample of MQSeries
products, (2) create required MQSeries
objects, (3) create and configure MQSeries
channels, and (4) establish MQSeries
client/ server connections. The use of channel
exits is also described.
SC34-5349
MQSeries Queue
Manager Clusters
Explains the concepts and terminology of
MQSeries clustering, and shows how you
can benefit by taking advantage of cluster
support. It summarizes the syntax of new
and changed commands and shows a
number of examples of tasks you can
perform to set up and maintain clusters of
queue managers.
GC33-1632
SC33-1369
MQSeries Clients
Describes how to install, configure, use, and
manage MQSeries client systems.
MQSeries Command
Reference
Contains the syntax of the MQSC
commands, which are used by MQSeries
system operators and administrators to
manage MQSeries objects.
SC33-1482
SC34-5390
SC33-0807
MQSeries
Programmable System
Management
Provides both reference and guidance
information for users of MQSeries events,
programmable command formats (PCFs),
and installable services.
MQSeries
Provides both guidance and reference
Administration Interface information for users of the MQSeries
Programming Guide and Administration Interface.
Reference
MQSeries Application
Programming Guide
Provides guidance information for users of
the message queue interface (MQI). It
describes how to design, write, and build an
MQSeries application. It also includes full
descriptions of the sample programs
supplied with MQSeries.
92 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Table 4. MQSeries for AS/400 books (continued)
Order
Title
Description
Number
SC33-1673
MQSeries Application
Provides comprehensive reference
Programming Reference information for users of the MQI. It includes:
data-type descriptions; MQI call syntax;
attributes of MQSeries objects; return codes;
constants; and code-page conversion tables.
SX33-6095
SC33-1877
MQSeries Application
Programming Reference Application Programming Reference manual.
Summary
Summarizes the information in the MQSeries
MQSeries Using C++
Provides both guidance and reference
information for users of the MQSeries C++
programming-language binding to the MQI.
Hardcopy Books
The book that you are reading now is MQSeries for AS/400 Quick Beginnings.
This is the only book that is supplied in hardcopy with the product. However,
You can order publications from the IBMLink™ Web site at:
http://www.ibm.com/ibmlink
In the United States, you can also order publications by dialing
1-800-879-2755.
In Canada, you can order publications by dialing 1-800-IBM-4YOU
(1-800-426-4968).
For further information about ordering publications contact your IBM
authorized dealer or marketing representative.
For information about printing books, see “PDF” on page 94.
Online Information
This section describes:
Chapter 8. Obtaining Additional Information 93
Download from Www.Somanuals.com. All Manuals Search And Download.
Online Information
Publications CD-ROM
Included with the product is a publications CD-ROM. On this CD-ROM there
are three directories; books, amqaa60w, and readme.
CD-ROM books directory
The books directory contains the MQSeries for AS/ 400 books in HTML and
PDF formats. To access them point you Web browser to books/start.htm.
HTML: You can view the MQSeries online documentation in HTML format
directly from the publications CD-ROM. All books except for the MQSeries
Application Programming Reference Summary are available in U.S. English and
also in some or all of the following national languages:
v French
v German
v Italian
v Japanese
v Korean
v Spanish
v Simplified Chinese
When you read the books in HTML, you can follow hypertext links from one
book to another. If you are reading translated books and link to a book that is
not available in your national language, the U.S. English version of the book
will be opened instead.
PDF: A PDF (Portable Document Format), corresponding to each hardcopy
book, is available on the publications CD-ROM. You can read PDFs using
Adobe Acrobat Reader. Also, you can download them to your own file
system, or you can print them on a PostScript printer. If you have a Web
browser, you can access the PDFs on the publications CD-ROM by pointing
your browser to books/start.htm.
The PDFs are available in U.S. English and also in some or all of the following
national languages:
v French
v German
v Italian
v Japanese
v Korean
v Spanish
v Simplified Chinese
94 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Online Information
To find out which ones are available in your language, look for the
appropriate directory on the CD-ROM. The PDFs are in the directory
BOOKS/ PDF/ ll_LL, where ll_LL is one of the following:
v en_US (English)
v fr_FR (French)
v de_DE (German)
v it_IT (Italian)
v ja_JP (Japanese)
v ko_KR (Korean)
v es_ES (Spanish)
v zh_CN (Simplified Chinese)
Within these directories, you can find the complete set of PDFs that are
Table 5. MQSeries publications – file names
Book
File Name
AMQWAC00
AMQWAG00
AMQWAK00
MQSeries for AS/400 Quick Beginnings
MQSeries for AS/400 System Administration
MQSeries for AS/400 Application Programming Reference (ILE
RPG)
MQSeries Planning Guide
CSQZAB03
CSQZAE03
CSQZAF03
CSQZAJ03
CSQZAI03
CSQZAK03
CSQZAL03
CSQZAM03
AMQZAN03
CSQZAT01
MQSeries Intercommunication
MQSeries Clients
MQSeries Command Reference
MQSeries Programmable System Management
MQSeries Application Programming Reference
MQSeries Application Programming Guide
MQSeries Application Programming Reference Summary
MQSeries Using C++
MQSeries Administration Interface Programming Guide and
Reference
MQSeries Queue Manager Clusters
CSQZAH01
Chapter 8. Obtaining Additional Information 95
Download from Www.Somanuals.com. All Manuals Search And Download.
Online Information
CD-ROM amqaa60w directory
The amqaa60w directory contains a package of searchable PDF files. The
package comprises a set of panels, books, and index files and provides a
method of searching the MQSeries library on your workstation using Adobe
Acrobat Reader with Search. The package is available in U.S. English only.
In addition to providing a search facility, the package offers the following
advantages:
v Full cross-referencing within books that allows you to jump to other parts
of the same document
v Hyperlinked URLs to enable transparent integration with the Web
v Thumbnail images of all pages in the book to allow you to scan for
diagrams, tables and so on
To take advantage of the usability enhancements provided in this package,
you need Adobe Acrobat Reader with Search Version 4.
To use the package, start Adobe Acrobat Reader and open the file
amqaa60w.pdf located in the amqaa60w/ panels directory on the publications
CD-ROM.
The package is also supplied in a zip file and a tar file. If you wish, you can
unpack these onto your own file system and access them from there instead of
directly from the CD-ROM.
CD-ROM readme directory
The readme directory contains, in each national language, a file of up-to-date
product information that you should read before installing or using this
product.
There might also be a file of latest information (in U.S. English only) that
became available after the readme files were translated.
HTML and PDF Books on the World Wide Web
The MQSeries for AS/ 400 books are available on the World Wide Web as well
as on the publications CD-ROM. They are available in PDF and HTML
format. The MQSeries product family Web site is at:
http://www.ibm.com/software/ts/mqseries/
By following links from this Web site you can:
v Obtain latest information about the MQSeries product family.
v Access the MQSeries books in HTML and PDF formats.
v Download MQSeries SupportPacs.
96 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Online Information
BookManager CD-ROMs
The MQSeries library is supplied in IBM BookManager® format on a variety
of online library collection kits, including the Transaction Processing and Data
collection kit, SK2T-0730. You can view the softcopy books in IBM
BookManager format using the following IBM licensed programs:
BookManager READ/ 2
BookManager READ/ 6000
BookManager READ/ DOS
BookManager READ/ MVS
BookManager READ/ VM
BookManager READ for Windows
Online Help
MQSeries for AS/ 400 provides context-sensitive help. If you place your cursor
on a command or panel field and press PF1, you are presented with relevant
help information.
Chapter 8. Obtaining Additional Information 97
Download from Www.Somanuals.com. All Manuals Search And Download.
98 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A. Sample MQI Programs
MQSeries for AS/ 400 provides a set of short sample MQI programs. You can
choose to install these when you install the base product. If you do install
them, you get them in both source form and object form. You can use the
objects as they are or you can modify and recompile the source for
experimental purposes.
C, COBOL, and RPG Program Samples
QMQMSAMP library, which is available as an installable option. To find out
more about what the programs do and how to use them, see the MQSeries
Application Programming Guide.
Table 6. Sample programs – source files
Technique
C
COBOL
AMQ0PUT4
–
RPG
Putting messages using MQPUT AMQSPUT0
AMQnPUT4
–
Putting messages from a data
file using MQPUT
AMQSPUT4
Putting a single message using
MQPUT1
AMQSINQ4
AMQSECH4
AMQ0INQ4
AMQ0ECH4
AMQnINQ4
AMQnECH4
Putting messages to a
distribution list
AMQSPTL4
–
–
Replying to a request message
Getting messages (no wait)
AMQSINQ4
AMQSGBR4
AMQSGET4
AMQ0INQ4
AMQ0GBR4
AMQ0GET4
AMQnINQ4
AMQnGBR4
AMQnGET4
Getting messages (wait with
time limit)
Getting messages (unlimited
wait)
AMQSTRG4
AMQSECH4
–
AMQ3TRG4
Getting messages (with data
conversion)
AMQ0ECH4
AMQnECH4
Putting reference messages to a AMQSPRM4
queue
–
–
–
–
–
–
–
–
Getting reference messages from AMQSGRM4
a queue
Using reference message
channel exit
AMQSQRM4
AMQSXRM4
Using message exit
AMQSCMX4
© Copyright IBM Corp. 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
99
Samples
Table 6. Sample programs – source files (continued)
Technique
C
COBOL
RPG
Browsing first 20 characters of a AMQSGBR4
message
AMQ0GBR4
AMQnGBR4
Browsing complete messages
Using a shared input queue
AMQSBCG4
AMQSINQ4
–
–
AMQ0INQ4
AMQ0REQ4
AMQ0INQ4
AMQ0SET4
AMQ0REQ4
AMQ0REQ4
AMQ0GBR4
AMQ0GBR4
–
AMQnINQ4
AMQnREQ4
AMQnINQ4
AMQnSET4
AMQnREQ4
AMQnREQ4
AMQnGBR4
AMQnGBR4
AMQ3TRG4
AMQ3SRV4
AMQ3SRV4
Using an exclusive input queue AMQSREQ4
Using the MQINQ call
Using the MQSET call
Using a reply-to queue
AMQSINQ4
AMQSSET4
AMQSREQ4
Requesting message exceptions AMQSREQ4
Accepting a truncated message
Using a resolved queue name
Triggering a process
AMQSGBR4
AMQSGBR4
AMQSTRG4
AMQSERV4
Using a trigger server
–
Using a trigger server (including AMQSERV4
CICS® transactions)
–
Using data conversion
AMQSVFC4
–
–
Notes:
1. Source for the ILE C samples is in QMQMSAMP/ QCSRC. Include files
exist as members in the file QMQM/ H.
2. Source for the COBOL samples is in QMQMSAMP/ QCBLSRC for the
OPM compiler, and QMQMSAMP/ QCBLLESRC for the ILE compiler.
Copy members exist in QMQM/ QCBLSRC and QMQM/ QCBLLESRC
respectively. The members are named AMQ0xxx4 for OPM, and
AMQ5xxx4 for ILE. xxx indicates the sample function.
3. There are three sets of RPG sample programs:
a. OPM RPG programs. The source for these is in
QMQMSAMP/ QRPGSRC. The members are named AMQ1xxx4, where
xxx indicates the sample function. Copy members exist in
QMQM/ QRPGSRC.
b. ILE RPG programs using the MQI through a call to QMQM. The
source for these is in QMQMSAMP/ QRPGLESRC. The members are
named AMQ2xxx4, where xxx indicates the sample function. Copy
members exist in QMQM/ QRPGLESRC. Each member name has a
suffix of ’R’.
100 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Samples
c. ILE RPG programs using prototyped calls to the MQI. The source for
these is in QMQMSAMP/ QRPGLESRC. The members are named
AMQ3xxx4, where xxx indicates the sample function. Copy members
exist in QMQM/ QRPGLESRC. Each member name has a suffix of ’G’.
If the objects required by the sample programs are missing from your system,
you can create them. Use the program in member AMQSCOMA in the source
physical file QMQMSAMP/ QMQSC. You can also use this program to reset
the attributes of default system objects.
Appendix A. Sample MQI Programs 101
Download from Www.Somanuals.com. All Manuals Search And Download.
102 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B. Applying Maintenance to MQSeries for AS/400
This appendix tells you how to apply maintenance to MQSeries for AS/ 400.
Service updates for MQSeries for AS/ 400 are supplied as PTFs (Program
Temporary Fixes). They may be supplied on a CD-ROM, or you may obtain
them electronically as save files, which are normally stored in the QGPL
library. For details of how to load and apply PTFs and read their cover letters,
see the AS/400 Basic System Operation, Administration, and Problem Handling
manual, SC41-5206.
Before loading and applying a PTF:
v Read the cover letter carefully to see if you need to take any special actions.
Reinstalling MQSeries for AS/400
You can reinstall MQSeries for AS/ 400, V5.1 without losing any of your data.
When you reinstall MQSeries for AS/ 400, the system checks whether the
MQSeries configuration file (mqs.ini) exists. If the file exists, it is kept and
used with the newly installed system. If the file does not exist, an empty
mqs.ini file is placed in the directory / QIBM/ UserData/ mqm.
All data that you have in the UserData directory is transferred to the newly
installed system. In addition, all the queue manager-associated libraries
containing journal and receiver information are transferred to the new system.
© Copyright IBM Corp. 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
103
104 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C. Notices
This information was developed for products and services offered in the
United States. IBM may not offer the products, services, or features discussed
in this information in other countries. Consult your local IBM representative
for information on the products and services currently available in your area.
Any reference to an IBM product, program, or service is not intended to state
or imply that only that IBM product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe
any IBM intellectual property right may be used instead. However, it is the
user’s responsibility to evaluate and verify the operation of any non-IBM
product, program, or service.
IBM may have patents or pending patent applications covering subject matter
described in this information. The furnishing of this information does not give
you any license to these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
For license inquiries regarding double-byte (DBCS) information, contact the
IBM Intellectual Property Department in your country or send inquiries, in
writing, to:
IBM World Trade Asia Corporation
Licensing
2-31 Roppongi 3-chome, Minato-ku
Tokyo 106, Japan
The following paragraph does not apply to the United Kingdom or any
other country where such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow
disclaimer of express or implied warranties in certain transactions, therefore
this statement may not apply to you.
This information could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will
be incorporated in new editions of the information. IBM may make
© Copyright IBM Corp. 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
105
Notices
improvements and/ or changes in the product(s) and/ or the program(s)
described in this information at any time without notice.
Any references in this information to non-IBM Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those
Web sites. The materials at those Web sites are not part of the materials for
this IBM product and use of those Web sites is at your own risk.
IBM may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Licensees of this program who wish to have information about it for the
purpose of enabling: (i) the exchange of information between independently
created programs and other programs (including this one) and (ii) the mutual
use of the information which has been exchanged, should contact:
IBM United Kingdom Laboratories,
Mail Point 151,
Hursley Park,
Winchester,
Hampshire,
England
SO21 2JN.
Such information may be available, subject to appropriate terms and
conditions, including in some cases, payment of a fee.
The licensed program described in this information and all licensed material
available for it are provided by IBM under terms of the IBM Customer
Agreement, IBM International Programming License Agreement, or any
equivalent agreement between us.
Information concerning non-IBM products was obtained from the suppliers of
those products, their published announcements or other publicly available
sources. IBM has not tested those products and cannot confirm the accuracy
of performance, compatibility or any other claims related to non-IBM
products. Questions on the capabilities of non-IBM products should be
addressed to the suppliers of those products.
106 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
Trademarks
The following are trademarks of International Business Machines Corporation
in the United States, or other countries, or both:
AIX
CICS
IBM
OS/ 2
RISC System/ 6000
WIN-OS/ 2
AS/ 400
DB2
IBMLink
OS/ 390
SupportPac
400
BookManager
eNetwork
MQSeries
OS/ 400
VisualAge
Java and all Java-based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and/ or other
countries.
Microsoft, Windows, Windows NT, and the Windows logo are trademarks of
Microsoft Corporation in the United States, other countries, or both.
Intel and Pentium are trademarks of Intel Corporation in the United States
and/ or other countries. (For a complete list of Intel trademarks see
www.intel.com/ tradmarx.htm)
UNIX is a registered trademark in the United States, other countries, or both
and is licensed exclusively through X/ Open Company Limited.
Other company, product, and service names may be trademarks or service
marks of others.
Appendix C. Notices 107
Download from Www.Somanuals.com. All Manuals Search And Download.
108 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
commands
CL
events (continued)
A
administration command sets
G
groups, creating
AIX client
H
hardware requirements
application
applications
creating
groups
B
custom installation
books
HP-UX client
C
D
CCSID (coded character set
identifier)
deleting
I
Digital UNIX client
channel
installation
DOS client
E
error log
response files
coded character set identifier
(CCSID)
events
© Copyright IBM Corp. 2000
109
Download from Www.Somanuals.com. All Manuals Search And Download.
installing
MQI
MQSeries calls
program samples
programmable command format
(PCF)
instrumentation events
Q
MQSeries for AS/ 400
queue manager
J
K
L
local queues
N
queue managers
queues
M
message
O
objects
local
OS/ 2 Warp client
migration
R
removing clients
P
110 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing clients
requirements
T
translated messages
response files
U
unattended installation
S
sample programs
user ID, creating
silent install
SMIT
SMS
V
software requirements
W
Windows 3.1 client
Sun Solaris client
Windows 95 and Windows 98 client
Windows NT client
System Management Interface Tool
(SMIT)
Index 111
Download from Www.Somanuals.com. All Manuals Search And Download.
112 MQSeries for AS/ 400, V5.1 Quick Beginnings
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending your comments to IBM
If you especially like or dislike anything about this book, please use one of
the methods listed below to send your comments to IBM.
Feel free to comment on what you regard as specific errors or omissions, and
on the accuracy, organization, subject matter, or completeness of this book.
Please limit your comments to the information in this book and the way in
which the information is presented.
To request additional publications, or to ask questions or make comments
about the functions of IBM products or systems, you should talk to your IBM
representative or to your IBM authorized remarketer.
When you send comments to IBM, you grant IBM a nonexclusive right to use
or distribute your comments in any way it believes appropriate, without
incurring any obligation to you.
You can send your comments to IBM in any of the following ways:
v By mail, to this address:
Information Development Department (MP095)
IBM United Kingdom Laboratories
Hursley Park
WINCHESTER,
Hampshire
United Kingdom
v By fax:
– From outside the U.K., after your international access code use
44–1962–870229
– From within the U.K., use 01962–870229
v Electronically, use the appropriate network ID:
– IBM Mail Exchange: GBIBM2Q9 at IBMMAIL
– IBMLink™: HURSLEY(IDRCF)
– Internet: idrcf@hursley.ibm.com
Whichever you use, ensure that you include:
v The publication number and title
v The topic to which your comment applies
v Your name and address/ telephone number/ fax number/ network ID.
© Copyright IBM Corp. 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
113
IBMR
Printed in the United States of America
on recycled paper containing 10%
recovered post-consumer fiber.
GC34-5557-00
Download from Www.Somanuals.com. All Manuals Search And Download.
Spine information:
IBM
MQSeries® for AS/400®
MQSeries for AS/400, V5.1 Quick Beginnings V5.1
Download from Www.Somanuals.com. All Manuals Search And Download.
|