Model. HQL170WR/200NR
User's Guide
* The above image may look different from the real product.
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Information
User Instructions
The Federal Communications Commission Radio Frequency Interference Statement includes the
following warning :
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television receptions, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for assistance.
User Information
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
DECLARATION OF CONFORMITY
WE
HYUNDAI ImageQuest CO., LTD.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
Kind of equipment : LCD TV
Type-Designation : LT17AW000 / LT20A0000
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
Safety
EMC
:
:
EN60065 : 1998/IEC60065:1998
EN 55013 /1990+A12 : 1994+A13 : 1996+A14 : 1999
EN 55022 : 1998+A1 : 2000 Class B
EN 55024 : 1998+A1 : 2001
EN 55020 : 1994+A11 : 1996+A13 : 1996+A14 : 1999+A12 : 1999
EN 61000-3-2 : 2000, EN 61000-3-3 : 1995+A1 : 2001
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
Accredited testlaboratory:
TÜV Rheinland
Am Grauen Stein
51105 Köln
KOREA /MAY. 15, 2004
Place and date of issue)
HONG KI, KIM
(Name and signature of
authorized person)
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Tips
Image Retention Effect(Image Sticking)
1. Cause :
- If LCD TV displays the same pattern for a long period of time, Image Retention Effect may develop
due to the LCD structure.
- This is a common phenomenon that occurs in all LCD products on current market.
2. Prevention :
- To avoid this matter, use the product after reducing brightness and contrast, especially when a still
image is displaying for a long time. (Example : Contrast 25, Brightness 25 - See the page 34)
Once Image retention occurs, change the mode into Video mode which displays more motion
pictures. It will help reduce this effect, but cannot completely eliminate the effect once it occurs.
When a fixed pattern is displayed often, screen brightness may get worse.
3. Solution :
- Displaying a full white pattern for around 10 hours might help reduce latent image effect temporarily.
- It is not possible to permanently prevent Image Sticking Effect using current technology.
4. Notice :
- It is very important to notify every buyer/customer of this information and all distributors/buyers/
customers should be fully aware of this.
- A manufacturer cannot provide a technical support of Image Sticking Effect of LCD TV. And Warranty
does not include Image Sticking Effect.
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Image Sticking Precaution
Still Image Wide/4:3 in Motion Image
Wide, 4:3 aspect ratio
Box or Still image
• Precaution :
- Image Sticking could be come from Still Image and Boundary line for a long time display and
Brightness gap in Boundary.
- This Matter(Image Sticking) is same thing under the other LCD TV's Company.
- Still Image/Letter in watching TV also will be effect to Image sticking.
*This matter(Image Sticking) is out of warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
A Wide Array of Screen Settings
You can choose different screen settings depending on the type of program you are watching
or the surrounding conditions (the lighting or the outside weather conditions).
You can switch among Dynamic, Mild and Standard, or you can configure the screen settings
for yourself.
A Wide Array of Sound Settings
You can choose an optimal sound setting for the type of program you are watching.
You can switch among Standard, Music, Movie and News, or you can configure the settings for
yourself.
Various Screen Sizes
Standard (4:3), Widescreen (16:9) and Zoom are available.
PIP (Picture In Picture), POP (Picture Of Picture) are Multi(9 screens) functions are provided.
Teletext Function
You can display teletext information at any time on your TV.
Surround Audio Function
You can listen to dynamic and surround sound only with ordinary speakers.
Auto ON/OFF Function
This function allows you to turn on/off your LCD TV at the preset time.
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Table of Contents
How to Set the Audio Mode(Equalize) ..................................42
How to Set the Desired Audio .............................................43
How to Listen to Stereo Sound / Dual Sound .......................44
How to Select the Surround ................................................46
How to Select AVL .............................................................47
How to Select the Sound Swap ...........................................48
General Information
Safety Precaution .................................................................5
Contents of the Package .....................................................11
Separately Sold Products ....................................................11
How to Use the Kensington Security Slot ............................12
How to Use the Rear Cap and Cable Holder .........................13
How to Adjust the View Angle .............................................14
How To Install Wall Mount Support .....................................15
Parts Names and Functions ................................................17
Remote Control ..................................................................19
PC Setup
How to Select the Color Mode .............................................51
How to Select the Auto Adjust .............................................52
How to Set the Geometry ....................................................53
Connections
Connecting Indoor/Outdoor TV Antenna(UHF/VHF) ...............23
TV Setup
How to Store Program Automatically ...................................55
How to Set Manual Store ....................................................56
How to Directly Select the PR LIST ......................................59
Connecting to the Antenna Input Connection
on the External Equipment ..................................................24
Connecting a VCR, Cable/Satellite Receiver .......................25
Connecting a DTV Receiver or DVD Player ..........................26
Playing Back a Tape Recorded On a Camcorder .................27
Connecting to a PC .............................................................28
Resolutions Supported in PC ..............................................29
Scart Connection to the External Input/Output .....................30
Scart Pin Specifications ......................................................31
Option Setup
Choosing Your Language ....................................................61
How to Set OSD(On-Screen-Display) Display Time ..............62
How to Select the OSD Background ....................................63
How to Set Sleep Time .......................................................64
How to Set Clock ................................................................65
How to Set On /Off Time .....................................................66
How to Set Key-Lock ..........................................................68
Displaying Information ........................................................69
Teletext Feature .................................................................71
Displaying the Teletext Information .....................................72
Selecting Display Options ...................................................72
Picture Setup
How to Select the Picture Mode ..........................................33
How to Set the Desired Picture ...........................................34
How to Set Noise Reduction ................................................35
How to Set PIP [Mode] ........................................................36
How to Set POP [Mode] ......................................................36
How to Set Multi [Mode] .....................................................37
How to Freeze Picture .........................................................38
How to Select the Aspect Ratio ...........................................39
Appendix
Troubleshooting ..................................................................75
Care and Cleaning ..............................................................77
Product Specifications ........................................................78
Audio Setup
How to Select the Volume, Balance and Mute .....................41
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precaution
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
WARNING
If there is a persistent accumulation
of dusts or water on the plug, please
make sure to wipe it off using a dry
cloth.
- It may cause a fire or an electric shock.
Do not connect multiple electrical
appliances to a single outlet.
- It may cause a fire due to overheating from the
outlet.
WARNING
Do not install in a place where there
is oil, smoke, excessive humidity, or
where water may be sprinkled,
dripped, splashed on it.
- This may cause electric shock or fire.
Do not put a water bowl, vase,
candle, bug repellant smoke,
cigarette, plants, or heavy thing on
the LCD TV.
- It may cause electric shock or fire and also
heavy things may cause injury when they fall.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.
This icon is intended to alert the user to the presence of potential danger and important operating instructions.
Warning : When there is a possibility of serious injury or death if not observed.
Alert : When there is a possibility of slight injury or product damage if not observed.
Do not use a damaged
power cord or plug, or loose
Please avoid touching the panel
at the rear of LCD TV as it is
outlet.
producing high temperature.
- Direct contact with the hot surface may
cause physical burns.
- They may cause electric shock or fire.
Firmly plug in the power
cord so that it does not pull
Never touch the power plug
or outlet with wet hands.
- This may cause electric shock.
out.
- An unstable connection may cause
fire.
Do not use or store a flammable
spray or inflammable things near the
LCD TV.
- They may cause explosion or fire.
Do not install the LCD TV in a
Do not install on an unstable place
bookshelf, closet, or a place where
or small support.
- This may cause the LCD TV to fall, resulting in
serious injury to a child or adult.
there is poor air circulation.
- Fire may be caused due to the rise of internal
temperature.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precaution ....................................Continued from previous page
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
WARNING
Never attempt to open, fix, or modify
the LCD TV.
- When there is a need for fixing, call a service
center. Fire or electric shock may be caused.
Make the antenna cable loop at the entrance
of the building. Any necessary action such as
making the antenna cable loop at the
entrance of the building should be taken to
prevent rainwater on the outdoor antenna
cable from possibly running into the indoor.
- If raindrop gets into the LCD TV, it may cause a
fire or an electric shock.
WARNING
Do not block ventilating slits.
- Blocking the ventilation slits prevents inner heat
from escaping, which may lead to a fire.
Do not place any heat sources such
as radiators and heat registers, etc.
on or near the LCD TV.
- It may cause a fire.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.
This icon is intended to alert the user to the presence of potential danger and important operating instructions.
Warning : When there is a possibility of serious injury or death if not observed.
Alert : When there is a possibility of slight injury or product damage if not observed.
When the LCD TV produces abnormal
noise, burning smell, or smoke,
unplug the LCD TV immediately and
call a service center.
- Electric shock or fire may be caused.
Do not put a metallic object like
chopstick, wire, or puncher or
inflammables like paper or a match
in a vent, headphone jack, or AV
jacks of the LCD TV.
Ensure the power cord
doesn’t trail across any hot
objects like a heater.
- This may cause a fire or an electric shock.
- Electric shock or fire may be caused.
Unplug the product during lightning
or thunderstorms and never touch
the antenna cable.
- It may cause a fire or an electric shock.
Keep the remote control batteries
out of sight and out reach of
Do not install the product on the
children.
- If your child swallows a battery, see your doctor
immediately.
floor.
- If it falls over, your child may be injured.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precaution ....................................Continued from previous page
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
WARNING
Do not place toys and cookies, etc.
on the LCD TV, which may attract
children’s attention. Children will
climb on the LCD TV to reach
whatever they have their eyes on.
- If it falls over on children, it may cause serious
injury.
Do not allow children to climb or
play on the LCD TV.
- If it falls over on children, it may cause serious
injury.
ALERT
Unplug when you do not use your
LCD TV for a long time.
- If dust is stacked on the LCD TV, electric shock
or fire may be caused from heat, fire, or
deterioration of insulation.
In the event of damaging or
dropping the product, switch off the
power and remove the plug.
- Using a damaged product may cause an electric
shock or a fire.
- Contact your local service center.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Safety instructions are divided into “Warning” and “Alert”. Their meanings are as follows.
This icon is intended to alert the user to the presence of potential danger and important operating instructions.
Warning : When there is a possibility of serious injury or death if not observed.
Alert : When there is a possibility of slight injury or product damage if not observed.
When replacing batteries, make
sure to match the batteries to the
(+) and (-) marks in the battery
compartment.
Alcohol
LUBRICANT
- Mismatching of polarities may result in internal
Benzene
damage to batteries, fire due to leakage or
contamination.
When cleaning the LCD TV, make sure
to disconnect the power plug and use
a dry, soft cloth for a cleanup.
- Please avoid using chemicals such as wax,
benzene, alcohol, thinner, mosquito spray,
air freshener, lubricant or synthetic
detergent.
Always use the standard batteries
and avoid using old batteries
together with new ones.
- Otherwise it may result in internal damage to
batteries, fire due to leakage or contamination.
Consult a service center or customer
service for inside cleaning about
once a year.
- When dust is piled inside the LCD TV for a long
time, fire or malfunction may be caused.
Before moving your LCD TV, ensure to
switch off the power and unplug all the
electrical cords and the external
When moving the LCD TV, 2 or more
people are advised to carry it.
- Injury or damage may be caused when the LCD
TV falls.
connection cords such as an antenna
cable and other source connections, etc.
- An electrical cord(s) may be damaged resulting
in a fire or an electrical shock.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents of the Package
To purchase additional parts, consult a distributor or selling agent.
Japan
Europe
UK
Remote Control/2
Batteries
Antenna Cable
Power Cord
America/Canada
(1.5V AAA)
South Africa
Australia
PC signal Cable(D-SUB)
User’s Guide
Korea
Separately Sold Products
If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller.
Composite(Video & Audio) Cable
Component(Y, Pb, Pr) Cable
S-video cable
Scart Cable
Audio Cable(DVD/DTV)
Audio Cable(PC)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Use the Kensington Security Slot
- This display unit supports a Kensington-type security device to secure your LCD TV. Kensington lock is not
included.
- To purchase and install the Kensington locking device, please refer to the following contact information.
Kensington
security slot
* Kensington Technology Group
• Address : 2000 Alameda de las Pulgas 2F San Mateo, California 94403-1289
• Tel : +1 650 572 2700
• Fax : +1 650 572 9675
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Use the Rear Cap and Cable Holder
The Rear Cap and Cable Holder allow you to organize the connection cables on the rear of the product.
1. Pressing and pulling two hooks on the
rear downward can detach the rear cover.
2. Connect your cables to the terminals of
the rear.
3. Organize the connected cables neatly
using the Cable Holder.
4. Align the rear cover with the guide holes
and push the cover firmly toward the front
of the monitor until the latches click into
the locked position.
Cable Holder
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Adjust the View Angle
You can adjust the angle of the view for the desired view angle.
You can adjust any angle within a range of 30º to the left or right.
30O
30O
You can adjust the tilt of the TV from -5º to 10º after the installation.
-5O
10O
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How To Install Wall Mount Support
1. Caution
1. Install on the vertical wall surface only.
2. Do not install on the following places to protect the performance of LCD TV and to prevent malfunction.
Near sprinkler Detector,
Near heating devices,
Places where vibration or shock may be applied ,
Near high voltage electric power line
3. Install in a proper method with the structural materials of the wall.
If the wall is not strong enough to stand weight of TV set, reinforce the wall surface before installation.
4. Do not install within a wall.
2. Parts configuration chart
130.0
Plastic Anchor - 4 EA
Screw - 4 EA
Washer - 4 EA
Screw - 5 EA
Fixing Panel Assembly
Base frame Assembly
* The above image may look different from the real product.
3. Angle Adjustment(Option)
The angle of LCD TV may be adjusted from -15 degree to 15 degree.
150 angle
-150 angle
No angle
* A fixed wall mount frame does not support angle adjustment.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How To Install Wall Mount Frame
4. Installation Method
1. Unscrew screws fastened on 4 spots on the stand of LCD
TV.
3. Fix the Base Frame Assy on the wall with screws or nails.
2. Fasten the Fixing Panel assembly on the back of LCD TV as
shown on the picture.
(ATTENTION! Please use the supplied screws (4 x 12 mm
or no longer than 12 mm.)
4. Hook the Fixing Panel Assy with the LCD TV attached on
the Base Frame Assy. (Tighten the screws as shown in
the above picture to ensure that the TV is secured.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Names and Functions
Front View
* The above image may look different from the real product.
Source button
Use this button to switch among inputs
connected to the LCD TV.
Power button
Use this button to turn on or off the LCD TV.
Remote sensor and power LED.
- Point the remote control toward here.
- It displays standby or operation status.
Menu button
Use this button to display or exit from menus.
Volume buttons
Speaker
Use these buttons for your desired sound
level. These buttons also serve as the cursor
of Select/Adjust when in Menu mode.
- Power Indicator Staus -
Indicator
Red
Status
Stand-by
Channel(Program) buttons
Use these buttons to change programs.
These buttons also serve as the cursor of
Down and Up buttons when in Menu mode.
Green
Power on
Green blinking
Remote control
17
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Rear View
* The above image may look different from the real product.
Use this for the better video quality than Composite
video input terminal.
Power input terminal
Power cord is connected here.
ANT. input
This allows you to connect your antenna.
D-SUB input terminal
Connect to RGB output terminal of a PC.
Component input terminal for DVD or DTV
Connect to the Component output terminal of DVD
player/DTV receiver.
Video and Audio Composite input terminal for VCR
Connect to the Composite Video output terminal of
VCR or DVD player.
Headphone Jack
Connect to the Headphone.
Audio input Jack
Connect to the audio output terminal of PC.
Audio input terminal for DVD or DTV
Connect to the audio output terminal of DVD
player/DTV receiver.
Scart input terminal
For Composite Video/Audio or R, G, B input used in
the European area.
S-video input terminal
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
POWER/STANDBY
Use this button to turn the TV set on or off.
MUTE
Use this button to turn the sound off completely.
NUMERIC KEYS
POWER
MUTE
- Use these buttons to select programs and input digit
- Enter program names using alphabets and special letters.
PRE-PR
1
4
2
5
8
0
3
6
Use these buttons to return to the previous program.
ASPECT RATIO
Use this button to change the picture size. (This function is
available only with the TV, Video, S-Vedio, Scart mode.)
7
9
STILL
PR LIST
PRE–PR
Use this button to freeze a picture.
VOLUME
SOUND PICTURE ASPECT
STILL
Use this button to control the volume level.
PR
COMPONENT
- Use this button to select programs.
- Use this button to jump back to TV mode from other mode.
- Use this button to turn the TV set on.
PC
VIDEO
VOLUME
PR
MULTI/S.SWAP
- Use this button to select 9 partitions screens. (This function
is available only with the TV, Video, S-Video, Scart mode.)
- Sound Swap is only available when in PIP/POP mode.
PIP
POP
SOURCE
SUB
MULTI
POSITION
S.SWAP
SUB SOURCE
Use this button to select the input source in sub picture.
(
TV VIDEO S-VIDEO SCART
MENU
UP/DOWN
Use these buttons to move each item of menu you want to
choose.
SOURCE
EXIT
MAIN
MAIN SOURCE
- Use these buttons to display the available video source.
(TV, VIDEO, S-VIDEO, SCART, COMPONENT, PC)
SLEEP
Use this button to allow your TV to turn off automatically at
designated time.
INFO
S.MODE
SLEEP
LIST/FLOF
REVEAL
TTX
MIX
INDEX
SIZE
STORE
HOLD
SUB PAGE
INFO
Use this button to display input source and clock information.
S.MODE
Use this button to display types of audio signals currently
aired on TV. Or you can use this button to switch to other
Sound Mode available.
EXIT
Use this button to exit from a menu or function.
Use this button to exit from PIP/POP/MULTI.
LEFT/RIGHT
Use this button to select or adjust each item of menu.
MENU
Use this button to bring up the OSD on the screen.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
POP (Picture Of Picture)
Use this button for POP On/Off. (This function is available
only with the TV, Video, S-Vedio, Scart mode.)
Teletext & Fastext Function
(
P. 71 ~ 73)
TTX
Use this button to activate the teletext mode.
LIST/FLOF
PIP (Picture in Picture) / POSITION
Use this button for PIP On/Off or select position.
To select LIST/FLOF mode.
STORE
To store teletext pages.
SUB PAGE
To move to Sub Page.
REVEAL
To reveal the hidden TTX information.
BLUE
VIDEO
Use this button to select Video, S-Video or Scart mode.
COMPONENT/PC
Use this button to select Component or PC mode.
SOUND
Use this button to select the status of sound.
PICTURE
Use this button to select the status of picture.
To move between BLOCK and BLOCK.
YELLOW
To move to NEXT GROUP PAGE.
PR LIST
Use this button to select program list.
GREEN
To move to NEXT EXISTING PAGE.
RED
To return to the previous selection
SIZE
The size is changed from Normal, Double to Double
INFO
MIX
S.MODE
INDEX
SIZE
SLEEP
LIST/FLOF
REVEAL
TTX
STORE
HOLD
SUB PAGE
Bottom mode in order.
HOLD
To freeze the TV screen when in Multi Page.
MIX
To select MIX mode.
INDEX
To move to INDEX in FLOF or move to INFO in TOP.
How to Insert Batteries in Remote Control
1
2
3
Press and hold ∆ part and push to
open cover.
Insert batteries with proper
polarities of + and - .
Use the remote control with cover
closed.
*Battery type : 1.5V/BP-2KM(AAA/LR03G
20
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting Indoor/Outdoor TV Antenna(UHF/VHF) ......................23
Connecting to the Antenna Input Connection on the External
Equipment ...................................................................................24
Connecting a VCR, Cable/Satellite Receiver ...............................25
Connecting a DTV Receiver or DVD Player .................................26
Playing Back a Tape Recorded On a Camcorder .........................27
Connecting to a PC ......................................................................28
Resolutions Supported in PC ......................................................29
Scart Connection to the External Input/Output ...........................30
Scart Pin Specifications ..............................................................31
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Indoor/Outdoor TV Antenna(UHF/VHF)
Connection Method
Ensure to connect an antenna cable to the antenna input connection.
indoor antenna
Power Cable
Antenna cable
Coaxial cable
outdoor antenna
Antenna cable
Coaxial cable
How to Watch
SOURCE
PR
MAIN
Turn on your LCD TV and press
or
on remote control unit to select TV.
1
You can select TV VIDEO S-VIDEO SCART COMPONENT PC in order.
PR
Press
or Numeric keys to select the desired Programs.
2
• When inserting a 75-ohm coaxial cable into the input connection, ensure the wire tip not to bend.
• If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture
quality.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Connecting to the Antenna Input Connection on the External Equipment
Connection Method
Connect an antenna cable to VCR/Cable/Satellite Receiver with the antenna input.
1
2
Use a coaxial cable to connect VCR/Cable/Satellite Receiver's antenna output to the antenna input on your
LCD TV.
VCR/Cable Receiver
)6<ꢃ7=<
)6<ꢃ16
ꢁ4ꢂ
ꢁ:ꢂ
)=,17
;ꢀ>1,-7 >1,-7
Coaxial cable
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a VCR, Cable/Satellite Receiver
Connection Method
Connect Video/S-Video cable between Video/S-Video output terminal of VCR or Cable/Satellite receiver and
Video/S-Video input terminal of LCD TV.
(Connect cables and terminal in the same colors)
1
Connect Audio cable (left:white color, right:red color) between Audio output terminal of VCR or cable/satellite
receiver and Audio input terminal of LCD TV.
(Connect cables and terminal in the same colors)
2
VCR/Cable Receiver
)6<ꢃ7=<
)6<ꢃ16
ꢁ4ꢂ
ꢁ:ꢂ
;ꢀ>1,-7 >1,-7
)=,17
Audio Cable
VIDEO Cable or
S-VIDEO Cable
How to Watch
VIDEO
Turn on your LCD TV and press
on remote control unit to select Video or S-Video.
1
You can select VIDEO S-VIDEO SCART in order.
VCR play : Turn on the VCR and insert a tape and play it.
Cable/Satellite receiver : Turn on the receiver and select a channel.
2
Read a user manual of VCR, Cable/Satellite Receiver for more details.
Use S-video cables for better picture quality.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Connecting a DTV Receiver or DVD Player
Connection Method
Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV receiver or DVD player and the
input terminals(Y, Pb, Pr) of DTV/DVD on the rear of LCD TV.
(Connect cables and terminal in the same colors)
1
Connect Audio cable between Audio output terminal of DTV receiver or DVD player and Audio input terminal
for DTV/DVD Audio on the rear of LCD TV.
(Connect cables and terminal in the same colors)
2
DTV receiver / DVD Player
AUDIO
VIDEO COMPONENT VIDEO
S-VIDEO
VIDEO(Y, Pb, Pr) Cable
Audio Cable
How to Watch
COMPONENT
PC
Turn on your LCD TV and press
on remote control unit to select DTV or DVD.
1
2
You can select COMPONENT PC in order.
Turn on a DTV receiver or DVD player and use it.
Read the user manual of DTV receiver or DVD player for more details.
- Output terminal mark(Y, Pb, and Pr) of DVD player may be written as Y, B-Y, R-Y/Y-Cb-Cr / Y-Pb-Pr. (It depends
on DVD player)
- To watch digital broadcast, you have to separately purchase a digital set-top box and connect it to LCD TV.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back a Tape Recorded On a Camcorder
Connection Method
Connect Video cable between Video output terminal of Camcoder/Game player and Video input terminal of
LCD TV.
(Connect cables and terminal in the same colors)
1
Connect Audio cable (left:white color, right:red color) between Audio output terminal of Camcoder/Game
player and Audio input terminal of LCD TV.
(Connect cables and terminal in the same colors)
2
Camcorder
Game Player
ꢁ4ꢂ
ꢁ:ꢂ
>1,-7
)=,17
Audio Cable
VIDEO Cable
How to Watch
VIDEO
Turn on your LCD TV and press
on remote control unit to select Video.
1
You can select VIDEO S-VIDEO SCART in order.
Turn on a Game player or Camcorder and use it.
2
Read the user manual of Game player or Camcorder for more details.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Connecting to a PC
Connection Method
Connect PC signal cable(15 pins D-SUB) between output terminal of PC and the D-SUB input terminal of
a LCD TV.
1
2
Connect Audio cable between Audio output terminal of PC and Audio input terminal for PC of LCD TV.
(Connect cables and terminal in the same colors)
Audio Cable
D-SUB Cable
(15pin)
When Using as a PC Monitor
COMPONENT
PC
Turn on your LCD TV and press
on remote control unit to select PC.
1
2
You can select COMPONENT PC in order.
Turn on the PC and use it. (Refer to next page on the back for the supported resolutions for PC)
This product supports plug-and-play function.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Resolutions Supported in PC
Resolution
720 x 400
Horizontal frequency(kHz)
Vertical frequency(Hz)
31.5
31.5
37.9
37.9
46.9
48.4
56.5
60
70.1
59.9
72.8
60.3
75
640 x 480
800 x 600
60
70.1
75
1024 x 768
HQL200NR
HQL170WR
- Recommended Resolution is 640x480@60Hz
- Max Resolution is 1024x768@75Hz
- Recommended Resolution is 1024x768@60Hz
- Max Resolution is 1024x768@75Hz
29
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Scart Connection to the External Input/Output
Connection Method
This end can be fitted with : A Scart connector
VCR
DVD
Video Game Device
Video Disc Player
Satellite Receiver
SCART CABLE :
RGB or VIDEO(CVBS) + Audio(L/R)
Set Top Box
How to Watch
VIDEO
Turn on your LCD TV and press
on remote control unit to select SCART.
1
2
You can select VIDEO S-VIDEO SCART in order.
Read a user manual of VCR, DVD, Satellite Receiver and other etc. for more details.
- When switching voltage comes into the Scart-Pin 8 during viewing a TV program, the current mode will be
switched to Scart mode.
- Any inappropriate connection when connecting or removing your scart connector may generate a Blue Screen.
If this happens, ensure that the scart connector is properly connected.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Scart Pin Specifications
If you wish to connect other equipment via the scart connectors on your TV, contact your dealer or a qualified
technician to wire the A/V cable as illustrated below.
PIN
SIGNAL
PIN
SIGNAL
12
13
14
15
16
17
18
19
20
21
-
1
2
Audio Output R
Audio Intput R
Audio Output L
Audio Intput GND
Blue Intput GND
Audio Intput L
Red Intput GND
-
3
RGB Red Input
4
RGB Blinking Signal Input
Video Output GND
Video Intput GND
Video Output (CVBS)
Video Intput (CVBS)
Scart Connector GND
5
6
7
RGB Blue Input
Switching Voltage Input
Green Intput GND
-
8
9
10
11
RGB Green Intput
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Setup
How to Select the Picture Mode .................................................33
How to Set the Desired Picture ...................................................34
How to Set Noise Reduction .......................................................35
How to Set PIP [Mode] ................................................................36
How to Set POP [Mode] ..............................................................36
How to Set Multi [Mode] .............................................................37
How to Freeze Picture ................................................................38
How to Select the Aspect Ratio ..................................................39
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Select the Picture Mode
Users can adjust picture mode automatically according to the input mode(TV, Video, S-Video, Scart, Component).
Press Menu button.
Menu items appear on the screen.
MENU
MODE
CONTRAST
BRIGHTNESS
USER
30
20
COLOR
25
TINT
25
SHARPNESS
20
NOISE REDUCT
OFF
Press Left and Right buttons to select
“
”
1
2
3
.
MOVE
SELECT
MENU
Press Up and Down buttons to move to
“Mode”.
MODE
USER
30
20
25
25
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
NOISE REDUCT
20
OFF
Press Left and Right buttons, then the menu
changes in order below.
MOVE
SELECT
MENU
STANDARD USER DYNAMIC MILD
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
STANDARD : For a general contents, It fits most video contents.
USER : When the user wants to set the values
DYNAMIC : For a clear display.
see the next page
MILD : For a soft display.
PICTURE
How To Directly Select Picture Mode : Press
button.
- Users can select Standard User Dynamic Mild
in order.
Adjustments menu may be different according to the input source.
(To set Picture mode in PC mode, please see page 51.)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Set the Desired Picture
Users can manually adjust the picture in their own ways.
Press Menu button.
MENU
MODE
CONTRAST
BRIGHTNESS
COLOR
USER
30
20
Menu items appear on the screen.
25
TINT
25
SHARPNESS
NOISE REDUCT
20
OFF
Press Left and Right buttons to select
“
”
1
2
3
4
5
.
MOVE
SELECT
MENU
Press Up and Down buttons to move to
“MODE”.
MODE
USER
30
20
25
25
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
NOISE REDUCT
20
OFF
Press Left and Right buttons to select
“USER”.
MOVE
SELECT
MENU
Press Up and Down buttons to choose
one of the items listed.
Press Left and Right buttons to adjust.
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
CONTRAST : Adjust the brightness and darkness of object and background.
BRIGHTNESS : Adjust the brightness of the entire picture.
COLOR : Adjust colors into deeper or lighter colors.
TINT : Adjust colors naturally.
SHARPNESS : Adjust clarity of outline of objects.
- COLOR, TINT, SHARPNESS is not applied to PC mode.
- SHARPNESS is not applied to Component mode.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set Noise Reduction
Noise Reduction is to eliminate some noise on the screen and is not applied to Component and PC mode.
Press Menu button.
Menu items appear on the screen.
MENU
MODE
USER
30
20
CONTRAST
BRIGHTNESS
COLOR
25
TINT
25
SHARPNESS
20
NOISE REDUCT
OFF
Press Left and Right buttons to select
“
”
1
2
3
.
MOVE
SELECT
MENU
Press Up and Down buttons to move to
“NOISE REDUCT”.
MODE
USER
30
20
25
25
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
NOISE REDUCT
20
OFF
Press Left and Right buttons, then the menu
changes in order below.
MOVE
SELECT
MENU
OFF MIDDLE STRONG
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
OFF : For a normal screen.
MIDDLE : For a reduced noise on the screen.
STRONG : For a strongly reduced noise on the screen.
In the noise reduction, the more you reduce screen noise, the more the sharpness level of the picture will
degrade.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Set PIP [Mode]
- You can watch another device's image in the PIP while watching the main image.
- This function is available only with the remote control.
PIP
Press the PIP button.
You will see the PIP at the upper left corner.
PIP
Main
Press the PIP button, then position
PIP
changes in order below.
Left Up Right Up Right Down
Left Down OFF
SOURCE
Press the SOURCE button, then PIP input source
changes in order below.
SUB
1
4
2
3
TV VIDEO S-VEDIO SCART
To deselect PIP function,
Press EXIT button.
EXIT
How to Set POP [Mode]
- You can watch another device's image in the POP while watching the main image in TV, VIDEO, S-VIDEO or SCART mode.
- This function is available only with the remote control.
Press the POP button.
POP
You will see the POP at the Right.
To deselect POP function,
Press POP button once more.
Main
POP
SOURCE
SUB
Press the SOURCE button, then POP input source
changes in order below.
TV VIDEO S-VEDIO SCART
To deselect POP function,
Press EXIT button.
EXIT
- Main and sub pictures cannot have the same input source.
- In case of TV mode, you can change the PIP TV program by “PR” Button.
- In case of TV mode, you can change the POP TV program by “PR” Button.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set Multi [Mode]
- You can watch all 9 screens in sequence.
- You can watch another device's image in the MULTI while watching the main image in TV, VIDEO, S-VIDEO or SCART mode.
- This function is available only with the remote control.
MULTI
Press the MULTI button.
You will see the Multi screen of nine screens.
To deselect Multi function, Press Multi button once more.
1
4
2
5
3
6
9
S.SWAP
To deselect Multi function,
Press EXIT button.
7
8
EXIT
- In case of TV mode, you can change the multi TV program.
- You cannot change the multi input source.
- This function is not available when in PIP/POP Mode.
Supported PIP Table
PIP : O → Supported, X → Not Supported
Main
TV
Video
S-Video
Scart
Component
PC
Sub
TV
X
O
O
O
O
O
Video
S-Video
Scart
O
O
O
X
X
X
O
O
X
X
O
X
O
X
X
O
O
X
X
X
O
O
O
X
X
O
O
O
X
X
Component
PC
37
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Supported POP Table
POP : O → Supported, X → Supported
Main
TV
Video
S-Video
Scart
Component
PC
Sub
TV
X
O
O
O
X
X
O
O
O
X
X
Video
X
O
O
X
X
O
X
O
X
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
S-Video
Scart
Component
PC
- When power is ON/OFF, PIP, POP and MULTI functions are not stored.
- When main picture is in PC/Component input mode, POP function is not supported.
- In PIP or POP function, you cannot use PC/Component input mode for sub-picture.
- In PC/Component input mode, MULTI function is not supported.
- While MULTI function is activated, STILL is not supported.
- While PIP is activated, you cannot change the sub-picture's size.
- Image SWAP function is not supported.
How to Freeze Picture
The user can temporarily stop the playing picture.
Press Still button.
Playing picture is stopped.
STILL
* In PIP/POP mode, the main picture stops.
To deselect Still function.
Press Still button once more.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Select the Aspect Ratio
- Users can adjust Aspect Ratio as users want.
- This function is available only with the remote control.
Press the ASPECT button, then Aspect Ratio
changes in order below.
ASPECT
NORMAL Zoom 16:9 (HQL200NR)
NORMAL Panorama Zoom 4:3 (HQL170WR)
HQL200NR
HQL170WR
Normal
Normal
General broadcast picture
size.
General broadcast picture
is adjusted to 15:9.
16:9
Panorama
General broadcast picture is
adjusted to 16:9.
Picture size for panorama
video.
Zoom
Zoom
Zoom in 4:3 in vertical
direction. (This mode is
recommended in letter
box format.)
Zoom in 4:3 in vertical
direction. (This mode is
recommended in letter
box format.)
4:3
General broadcast picture
size.
This function is available only in TV, VIDEO, S-VIDEO, SCART mode.
This function is not available in PIP, POP, MULTI mode.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Setup
How to Select the Volume, Balance and Mute ............................41
How to Set the Audio Mode(Equalize) .........................................42
How to Set the Desired Audio .....................................................43
How to Listen to Stereo Sound / Dual Sound ..............................44
How to Select the Surround ........................................................46
How to Select AVL ......................................................................47
How to Select the Sound Swap ..................................................48
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Select the Volume, Balance and Mute
- Users can adjust the volume and Balance of left and right speakers.
Press Menu button.
Menu items appear on the screen.
MENU
VOLUME
20
25
BALANCE
EQUALIZE
120 Hz
STANDARD
15
16
500 Hz
1.5 kHz
12
5
kHz
12
13
OFF
OFF
Press Left and Right buttons to select
10 kHz
SURROUND
AVL
“
”
1
2
3
.
MOVE
SELECT
MENU
Press Up and Down buttons to move to
“VOLUME or BALANCE”.
VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
20
25
STANDARD
15
16
12
12
13
5
kHz
10 kHz
SURROUND
AVL
OFF
OFF
Press Left and Right buttons to adjust.
MOVE
SELECT
MENU
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
MUTE
How To Select the Mute : Press
button.
Playing sound is Stopped.
To deselect Mute function, Press MUTE button once more.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Set the Audio Mode(Equalize)
Users can adjust sound mode automatically as users want.
Press Menu button.
Menu items appear on the screen.
MENU
VOLUME
BALANCE
EQUALIZE
120 Hz
20
25
STANDARD
15
16
500 Hz
1.5 kHz
12
5
kHz
12
13
OFF
OFF
Press Left and Right buttons to select
10 kHz
SURROUND
AVL
“
”
1
2
3
.
MOVE
SELECT
MENU
Press Up and Down buttons to move to
“EQUALIZE”.
VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
20
25
STANDARD
15
16
12
12
13
5
kHz
Press Left and Right buttons, then the menu
changes in order below.
10 kHz
SURROUND
AVL
OFF
OFF
MOVE
SELECT
MENU
STANDARD MUSIC MOVIE NEWS USER
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
STANDARD : For the general sound. This fits most audio contents.
MUSIC : For original sound
MOVIE : For grandiose sound
NEWS : For clear sound
USER : When the user wantsHto sYet tUhe vNalueDAI LCD TV HQL260
see the next page
SOUND
How To Directly Select Sound Mode : Press
button.
Users can select STANDARD MUSIC MOVIE NEWS USER in order.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set the Desired Audio
Users can manually adjust the sound in thier own ways.
Press Menu button.
Menu items appear on the screen.
MENU
VOLUME
BALANCE
EQUALIZE
120 Hz
20
25
STANDARD
15
16
500 Hz
1.5 kHz
12
5
kHz
12
13
OFF
OFF
Press Left and Right buttons to select
10 kHz
SURROUND
AVL
“
”
1
2
3
4
5
.
MOVE
SELECT
MENU
Press Up and Down buttons to move to
“EQUALIZE”.
VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
20
25
STANDARD
15
16
12
12
13
5
kHz
10 kHz
SURROUND
AVL
OFF
OFF
Press Left and Right buttons to select “USER”.
MOVE
SELECT
MENU
Press Up and Down buttons to choose one of the items listed.
120 Hz 500 Hz 1.5 kHz 5 kHz
10 kHz
Press Left and Right buttons to adjust.
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
43
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Listen to Stereo Sound / Dual Sound
- Users can set sound mode as users want.
- This function is available only with the remote control.
- Listening to stereo sound
S.MODE
Press the
button on the remote control to select Mono or Stereo.
S.MODE
Mono or Stereo be will selected in turn whenever you press the button.
S.MODE
(*During FM MONO broadcast, pressing the
button will display the current status.)
- Listening to the Dual sound
S.MODE
S.MODE
Press the
button on the remote control to select Dual sound.
Dual 1 : Your national language.
Dual 2 : Foreign language
(*Dual 1 or Dual 2 be will selected in turn whenever you press the button.)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
This S.MODE displays the current Audio signal status, and controls the processing of Audio signal. When power
is switched on, the mode is automatically preset to either “Dual-I” or “Stereo”, depending on the current signal
transmission condition.
Type of Broadcast
On-Screen Indication
Regular Broadcast
(Standard audio)
Mono
(Normal use)
Regular+
NICAM Mono
NICAM Mono
Mono
Mono
NICAM
Stereo
NICAM Stereo
NICAM Stereo
NICAM Dual 1 NICAM Dual 2
Mono
NICAM Dual-I/II
Regular broadcast
(Standard audio)
Mono
(Normal use)
A2
Stereo
Bilingual or Dual-I/II
Stereo
Dual 1
Stereo
Dual 2
Mono
If the signal reception conditions deteriorate, setting to Mono will make your listening condition better.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Select the Surround
You can listen to dynamic and surround sound only with ordinary speakers.
Press Menu button.
Menu items appear on the screen.
MENU
VOLUME
BALANCE
EQUALIZE
120 Hz
20
25
STANDARD
15
16
500 Hz
1.5 kHz
12
5
kHz
12
10 kHz
SURROUND
AVL
13
OFF
OFF
Press Left and Right buttons to select
“
”
1
2
3
MOVE
SELECT
MENU
.
Press Up and Down buttons to move to
“SURROUND”.
VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
20
25
STANDARD
15
16
12
12
13
5
kHz
10 kHz
SURROUND
AVL
ON
OFF
Press Left and Right buttons to select “ON/OFF”.
MOVE
SELECT
MENU
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
46
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Select AVL
This function automatically gives a similar volume size to each channel.
Press Menu button.
Menu items appear on the screen.
MENU
VOLUME
BALANCE
EQUALIZE
120 Hz
20
25
STANDARD
15
16
500 Hz
1.5 kHz
12
5
kHz
12
10 kHz
SURROUND
AVL
13
OFF
OFF
Press Left and Right buttons to select
“
”
1
2
3
MOVE
SELECT
MENU
.
Press Up and Down buttons to move to
“AVL”.
VOLUME
BALANCE
EQUALIZE
120 Hz
500 Hz
1.5 kHz
20
25
STANDARD
15
16
12
12
13
5
kHz
10 kHz
SURROUND
AVL
ON
OFF
Press Left and Right buttons to select “ON/OFF”.
MOVE
SELECT
MENU
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
47
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Select the Sound Swap
MULTI
MULTI
Press the
button.
S.SWAP
The Main Sound and Sub Sound will switch with each other whenever you press this button.
S.SWAP
- An Audio Swap function is only available when in PIP/POP mode.
- A Multi function is not available when in PIP/POP mode.
- If you select the Audio Swap in Audio Swap mode and end PIP/POP, the sound of main screen will come back.
- The audio input jack is used for both Video and S-Video.
- While watching the main screen and listening to the sound of sub-screen, the sound of sub-screen will be still
active even if you switch the current channel to another
- After selecting the Audio Swap, when you turn the power off and back on, the sound of main-screen will
come back.
- After switching to the sound of sub-screen in PIP/POP mode, even if you change the input of sub-screen to
other input, the sound of sub-screen will be still kept.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Setup
How to Select the Color Mode ....................................................51
How to Select the Auto Adjust ....................................................52
How to Set the Geometry ............................................................53
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Select the Color Mode
This function is available only with the PC mode.
Press Menu button.
MENU
MODE
CONTRAST
BRIGHTNESS
COLOR
USER
30
20
Menu items appear on the screen.
25
TINT
25
SHARPNESS
NOISE REDUCT
20
OFF
Press Left and Right buttons to select
“
”
1
2
3
.
MOVE
SELECT
MENU
Press Up and Down buttons to move to
“Mode”.
MODE
USER
30
20
25
25
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
NOISE REDUCT
20
OFF
Press Left and Right buttons, then the menu
changes in order below.
MOVE
SELECT
MENU
STANDARD USER COOL WARM
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
STANDARD : Color for general picture.
USER : When the user wants to set the values
COOL : For colors with bluish tone.
see the 34 page
WARM : Warm colors with reddish tone.
PICTURE
How To Directly Select Picture Mode : Press
button.
- Users can select Standard User Cool Warm , when the input mode is PC mode.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Select the Auto Adjust
- Horizontal/Vertical positions are automatically adjusted.
- This function is available only with the PC mode.
Press Menu button.
MENU
AUTO ADJUST
H-SIZE
H-POSITION
V-POSITION
FINE TUNE
SMOOTHING
Menu items appear on the screen.
7
25
12
0
0
Press Left and Right buttons to select
“
”
1
2
3
.
MOVE
SELECT
MENU
Press Up and Down buttons to move to
“Auto Adjust”.
AUTO ADJUST
H-SIZE
H-POSITION
V-POSITION
FINE TUNE
SMOOTHING
7
25
12
0
0
Press Left and Right buttons to “Auto Adjust”,
then it will be adjusted the screen.
MOVE
SELECT
MENU
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
52
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set the Geometry
- This is reduct image retention and noise.
- This function is available only with the PC mode.
Press Menu button.
MENU
AUTO ADJUST
H-SIZE
H-POSITION
V-POSITION
FINE TUNE
SMOOTHING
Menu items appear on the screen.
7
25
12
0
0
Press Left and Right buttons to select
“
”
1
2
3
.
MOVE
SELECT
MENU
Press Up and Down buttons to choose
one of the items listed.
AUTO ADJUST
H-SIZE
H-POSITION
V-POSITION
FINE TUNE
SMOOTHING
7
25
12
0
0
Press Left and Right buttons to adjust.
MOVE
SELECT
MENU
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
H-SIZE : To adjust the horizontal size of the picture.
H-POSITION : To adjust the horizontal position of the picture.
V-POSITION : To adjust the vertical position of the picture.
FINE TUNE : To adjust to eliminate the shake of picture.
SMOOTHING : To change viewing point at high resolution(Upper VGA)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setup
How to Store Program Automatically ..........................................55
How to Set Manual Store ............................................................56
How to Directly Select the PR LIST .............................................59
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Store Program Automatically
- When you start using your TV for the first time, you must select your country to auto store.
- You can scan channels available to you automatically.
Press Menu button.
Menu items appear on the screen.
MENU
COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
WEST EURO
0
FINE TUNE
PR EDIT
SORT
-1
Press Left and Right buttons to select
ERASED
FROM
OO
TO
OO
SAVE
EXIT
“
”
1
2
3
4
5
6
.
MOVE
SELECT
Press Up and Down buttons to move to
“Country”.
COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
WEST EURO
0
– 1
ERASED
Press Left and Right buttons,
then the menu changes in order below.
FROM
OO
TO
OO
SAVE
EXIT
MOVE
SELECT
WEST EURO EAST EURO FRANCE UK OTHERS
Press Up and Down buttons to move to
“Auto Store”.
Frequency : 48.25 Mhz ~ 855.25 Mhz
COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
WEST EURO
0
– 1
ERASED
Press Left and Right buttons to selcet “Auto Store”,
then it will be stored the searched channels.
After completing channel searching,
FROM
OO
TO
OO
SAVE
EXIT
MOVE
SELECT
it will return to the first stored program No.
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
- When AUTO STORE is completed, you will get back to the first stored program No.
- If you press MENU or EXIT button during AUTO STORE in progress, the AUTO STORE will stop at the last
stored program No. at the moment of pressing the button.
- After activating AUTO STORE, program numbers in green indicate that the correspondent channels are stored
and program numbers in blue indicate that the correspondent channels are not stored.
- After activating AUTO STORE, if you experience an unstable image of the stored channel, please refer to Step
8 and 9 on next page. If you live in a poor reception area, the image quality may not be improved.
- While Auto Store in progress, all channels broadcasting are memorized regardless of TV or CATV channels.
- WEST EURO(Germany, Spain, Italy, Netherland, Greece, Portugal, Norway, Denmark, Sweden, Switzerland,
Austria, Yugo, Slovenia...), EAST EURO(Russia, Slovak. Rep, Poland, Bulgalia, Hungary...), FRANCE, UK(UK,
Ireland), OTHERS(Luxembourg, Monaco...)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Set Manual Store
This function allows you to manually edit the desired programs while watching a TV program.
If the signal is weak or distorted, you have to fine tune the program manually.
Press Menu button.
Menu items appear on the screen.
MENU
COUNTRY
WEST EURO
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
0
FINE TUNE
-1
Press Left and Right buttons to select
PR EDIT
SORT
FROM
ERASED
OO
TO
OO
OO
OO
OO
SAVE
EXIT
“
”
1
2
3
4
5
6
7
.
MOVE
SELECT
Press Up and Down buttons to move to
“Searching”.
COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
WEST EURO
0
– 1
ERASED
Press Right button to searching the channel,
then the frequency changes in order below.
Channel Searching proceeds from
FROM
OO
TO
SAVE
EXIT
MOVE
SELECT
the current channel to the next channel.
Press Up and Down buttons to move to
“Program No”.
COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
WEST EURO
0
– 1
ERASED
Press Left and Right buttons to change the “Program No”.
Program Number is a current channel.
FROM
OO
TO
SAVE
EXIT
MOVE
SELECT
Press Up and Down buttons to move to
“Name”.
COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
WEST EURO
0
ABCD
– 1
ERASED
Press Right button to input the program name.
You can set up to 0 ~ 9 buttons.
FROM
OO
TO
SAVE
EXIT
MOVE
SELECT
A~Z , 0~9 , • , – , @ , , ’ , % , + , ‚ ,
,
,
, / , ( , )
To move one space (Space).
To delete one character (Delete)
To move your cursor to the right or left (Direction Key)
* If you do nothing within 5 seconds, you will automatically exit the NAME MENU.
Go to next page,
If the signal of current program is weak or distored.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
...... Continued from previous page.
COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
WEST EURO
Press Up and Down buttons to move to “Fine Tune”.
8
9
0
ABCD
– 1
ERASED
Press Left and Right buttons to adjust.
The fine tuned programs are automatically stored.
FROM
OO
TO
OO
SAVE
EXIT
MOVE
SELECT
Press Up and Down buttons to move to “PR EDIT”.
COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
WEST EURO
10
11
0
ABCD
– 1
ERASED
Press Left and Right buttons to select “Stored/Erased”,
Program number is a current channel.
FROM
OO
TO
OO
SAVE
EXIT
MOVE
SELECT
Go to step 12,
If users want to Sort the Program Number.
Press Up and Down buttons to move to “From”
COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
WEST EURO
12
13
14
15
0
ABCD
– 1
ERASED
Press Left and Right buttons to change the Program No.
FROM
O 5
TO
OO
SAVE
EXIT
MOVE
SELECT
Press Up and Down buttons to move to “To”.
COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
WEST EURO
0
ABCD
– 1
ERASED
FROM
O 5
TO
1 O
SAVE
EXIT
Press Left and Right buttons to change the Program No.
MOVE
SELECT
Countinued on next page ......
57
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
...... Continued from previous page.
• FROM : Current Program Number
• TO : Change Program Number
ex) From 5, To 10
Change the program number from 5 to 10.
COUNTRY
AUTO STORE
MANUAL STORE
SEARCHING
PROGRAM NO.
NAME
FINE TUNE
PR EDIT
SORT
WEST EURO
Press Up and Down buttons to move to “SAVE”.
Press Left and Right buttons to select the “Yes”
16
17
0
ABCD
– 1
ERASED
FROM
O 5
TO
1 O
SAVE
EXIT
MOVE
SELECT
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
58
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Directly Select the PR LIST
PR LIST
PROGRAM NO.
NAME
STORED
NO
Press PR EDIT button.
PR list items appear on the screen.
00
01
02
03
04
05
06
07
08
09
YES
YES
YES
YES
YES
YES
YES
YES
YES
ABC
CNN
Press Up and Down buttons to move to
“Program No”.
* Program No. : 00 ~ 99
1
MOVE
SELECT
EXIT
Press Left button to select “Stored/Erased”.
Program Number is a current channel.
2
Press Right button to select “Program No”.
3
If you want to change the program name or programe sort, please refer to page 56.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Option Setup
Choosing Your Language ............................................................61
How to Set OSD(On-Screen-Display) Display Time .....................62
How to Select the OSD Background ...........................................63
How to Set Sleep Time ...............................................................64
How to Set Clock ........................................................................65
How to Set On /Off Time .............................................................66
How to Set Key-Lock ..................................................................68
Displaying Information ................................................................69
Teletext Feature ..........................................................................71
Displaying the Teletext Information ............................................72
Selecting Display Options ...........................................................72
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing Your Language
When you start using your TV for the first time, you must select your language preference in order to display main
menu and sub menues, etc.
Press Menu button.
Menu items appear on the screen.
MENU
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
ENGLISH
5 SECONDS
TRANSPARENT
– –
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
OO
:
:
:
OO
OFF
OO
O
OO
OFF
OO
VOLUME
OO
1 1
Press Left and Right buttons to select
1
2
3
“
”
MOVE
SELECT
MENU
.
Press Up and Down buttons to move to
“Language”.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
ENGLISH
5 SECONDS
TRANSPARENT
– –
OO
:
:
:
OO
OFF
OO
O
OO
OFF
Press Left and Right buttons, then the menu
changes in order below.
OO
VOLUME
OO
1 1
ENGLISH FRANÇAIS DEUTSCH
ESPAÑOL ITALIANO
MOVE
SELECT
MENU
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
61
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Set OSD(On-Screen-Display) Display Time
Press Menu button.
Menu items appear on the screen.
MENU
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
ENGLISH
5 SECONDS
TRANSPARENT
– –
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
OO
:
:
:
OO
OFF
OO
O
OO
OFF
OO
VOLUME
OO
1 1
Press Left and Right buttons to select
1
2
3
“
”
MOVE
SELECT
MENU
.
Press Up and Down buttons to move to
“Display Time”.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
ENGLISH
5 SECONDS
TRANSPARENT
– –
OO
:
:
:
OO
OFF
OO
O
OO
OFF
Press Left and Right buttons, then the menu
changes in order below.
OO
VOLUME
OO
1 1
5 SECONDS 15 SECONDS 20 SECONDS
25 SECONDS 30 SECONDS 40 SECONDS
MOVE
SELECT
MENU
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
If you do not press the EXIT button after adjusting the OSD display time, the OSD menu will disappear
automatically after the set time.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Select the OSD Background
Users can select background type on On-Screen-Display.
Press Menu button.
Menu items appear on the screen.
MENU
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
ENGLISH
5 SECONDS
TRANSPARENT
– –
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
OO
:
:
:
OO
OFF
OO
O
OO
OFF
OO
VOLUME
OO
1 1
Press Left and Right buttons to select
1
“
”
MOVE
SELECT
MENU
.
Press Up and Down buttons to move to
“Background”.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
ENGLISH
5 SECONDS
TRANSPARENT
– –
2
3
OO
:
:
:
OO
OFF
OO
O
OO
OFF
OO
VOLUME
OO
1 1
Press Left and Right buttons to select
“Transparent/Opaque”.
MOVE
SELECT
MENU
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
63
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Set Sleep Time
This function allows you to automatically turn off your LCD TV after a designated amount of time.
Press Menu button.
Menu items appear on the screen.
MENU
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
ENGLISH
5 SECONDS
TRANSPARENT
– –
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
OO
:
:
:
OO
OFF
OO
O
OO
OFF
OO
VOLUME
OO
1 1
Press Left and Right buttons to select
KEY LOCK
1
2
3
“
”
MOVE
SELECT
MENU
.
Press Up and Down buttons to move to
“Sleep”.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ENGLISH
5 SECONDS
TRANSPARENT
– –
OO
:
:
:
OO
OFF
OO
O
OO
OFF
Press Left and Right buttons, then the menu
changes in order below.
ON TIME
OO
VOLUME
OO
PROGRAM NO.
OFF TIME
KEY LOCK
1 1
15 MINUTES 30 MINUTES 45 MINUTES
60 MINUTES 90 MINUTES 120 MINUTES OFF(- -)
MOVE
SELECT
MENU
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
SLEEP
How To Directly Select SLEEP : Press
button.
The current SLEEP time is first displayed. Whenever you press the button, the setting is changed in order below.
- - (OFF) SLEEP 15 MINUTES SLEEP 15 30 MINUTES SLEEP 30 ............... SLEEP 120
If the sleep time has been set, your TV will display “TURN OFF AFTER 1 MIN” before your TV turns off.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Set Clock
You can set the current time so that it may be displayed by pressing the “INFO” button. You must also set a clock if
you wish to use the automatic on or off timers.
Press Menu button.
Menu items appear on the screen.
MENU
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
ENGLISH
5 SECONDS
TRANSPARENT
– –
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
OO
:
:
:
OO
OFF
OO
O
OO
OFF
OO
VOLUME
OO
1 1
1 1
1 1
Press Left and Right buttons to select
1
2
3
“
”
MOVE
SELECT
SELECT
SELECT
MENU
.
Press Up and Down buttons to move to
“Clock”.
then cursors are moved to “Hour” unit.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
ENGLISH
5 SECONDS
TRANSPARENT
– –
1 2
:
O O
OFF
OO
O
OO
OFF
OO
VOLUME
OO
:
:
Press Left and Right buttons to set
the “Hour”.
MOVE
MENU
Press Up and Down buttons and then go to step 4
if you need to set the “Minute”.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
ENGLISH
5 SECONDS
TRANSPARENT
– –
1 2
:
:
:
3 O
OFF
OO
O
OO
OFF
OO
VOLUME
OO
Press Left and Right buttons to set
the “Minute”.
4
MOVE
MENU
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
- When the power supply AC main power is cut off, the clock is reset to the value before the Time set.
- User cannot use number(0~9) buttons to set the clock.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Set On /Off Time
- This function is allowed you to automatically turn on/off your LCD TV at the preset time.
- If you wish to use this function, make sure to set the timer to ON.
Press Menu button.
Menu items appear on the screen.
MENU
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
ENGLISH
5 SECONDS
TRANSPARENT
– –
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
OO
:
:
:
OO
OFF
OO
O
OO
OFF
OO
VOLUME
OO
1 1
Press Left and Right buttons to select
1
“
”
MOVE
SELECT
MENU
.
Press Up and Down buttons to move to
“Timer”.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
ENGLISH
5 SECONDS
TRANSPARENT
– –
2
3
1 2
:
:
:
3 O
ON
OO
O
OO
OFF
OO
VOLUME
OO
1 1
Press Left and Right buttons to selcet
“ON”.
MOVE
SELECT
MENU
Press Up and Down buttons and then go to step 4
if you need to set to “On Time”.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
ENGLISH
5 SECONDS
TRANSPARENT
– –
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
1 2
:
:
:
3 O
ON
OO
O
OO
OFF
0 7
1 1
VOLUME
OO
Cursors are moved to “ON TIME”.
Press Left and Right buttons to set
to “Hour”.
4
5
6
MOVE
SELECT
MENU
Press Up and Down buttons and then go to step 5
if you need to set to “Minute”.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
ENGLISH
5 SECONDS
TRANSPARENT
– –
1 2
:
:
:
3 O
ON
OO
O
OO
OFF
0 7
1 1
VOLUME
OO
Press Left and Right buttons to set
to “Minute”.
MOVE
SELECT
MENU
Press Up and Down buttons and then go to step 6
if you need to set to “Program No”.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
ENGLISH
5 SECONDS
TRANSPARENT
– –
1 2
:
:
:
3 O
ON
OO
O
OO
OFF
0 7
1 6
VOLUME
OO
Cursors are moved to “Program No”.
Press Left and Right buttons to set to
“Program No”.
MOVE
SELECT
MENU
Continued on next page ......
66
Download from Www.Somanuals.com. All Manuals Search And Download.
...... Continued from previous page. (Set the volume level at the time when your LCD TV turns on.)
Press Up and Down buttons and then go to step 7
if you need to set to “Volume”.
LANGUAGE
ENGLISH
5 SECONDS
TRANSPARENT
– –
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
1 2
:
:
:
3 O
ON
OO
15
OO
OFF
0 7
1 6
VOLUME
OO
Press Left and Right buttons to adjust “Volume”.
7
8
9
MOVE
SELECT
MENU
Press Up and Down buttons and then go to step 8
if you need to set to “Off Time”.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
ENGLISH
5 SECONDS
TRANSPARENT
– –
1 2
:
:
:
3 O
ON
OO
15
O O
OFF
0 7
1 6
VOLUME
2 3
Cursors are moved to “OFF TIME”.
Press Left and Right buttons to set
to “Hour”.
MOVE
SELECT
MENU
Press Up and Down buttons and then go to step 9
if you need to set to “Minute”.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
ENGLISH
5 SECONDS
TRANSPARENT
– –
1 2
:
:
:
3 O
ON
OO
15
3 O
OFF
0 7
1 6
VOLUME
2 3
Press Left and Right buttons to set to “Minute”.
MOVE
SELECT
MENU
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the EXIT button is pressed, the menu disappears.
EXIT
- Regardless of which Input Mode you set On Time in, your LCD TV will turn on in TV Mode only.
- User cannot use number(0~9) buttons to set the On/Off Time.
- If the OFF TIME has been set, your TV will display "TURN OFF AFTER 1 MIN” 1 minute before your TV turns off.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
How to Set Key-Lock
- This is to lock the control buttons on the front top of LCD TV.
- After setting the Key-Lock, your TV will work only with the remote control.
Press Menu button.
Menu items appear on the screen.
MENU
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
ENGLISH
5 SECONDS
TRANSPARENT
– –
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
OO
:
:
:
OO
OFF
OO
O
OO
OFF
OO
VOLUME
OO
1 1
Press Left and Right buttons to select
1
“
”
MOVE
SELECT
MENU
.
Press Up and Down buttons to move to
“key Lock”.
LANGUAGE
DISPLAY TIME
BACKGROUND
SLEEP
CLOCK
TIMER
ON TIME
PROGRAM NO.
OFF TIME
KEY LOCK
ENGLISH
5 SECONDS
TRANSPARENT
– –
2
3
1 2
:
:
:
3 O
ON
OO
15
3 O
OFF
0 7
1 6
VOLUME
2 3
Press Left and Right buttons, then the menu
changes in order below.
MOVE
SELECT
MENU
Off Once Always
Press MENU button after the setting is done, and Menu goes to the previous menu.
If the INPUT button is pressed, the menu disappears.
EXIT
OFF : With the lock function off, you can control the TV with both
the remote control and the buttons on the TV.
ONCE : The lock function will turn off automatically after AC power off/on.
Or after power-cut or unplugging the power cord to plug it back in.
ALWAYS : With the lock function always on, you can control the TV
only with the remote control, not with the buttons on the TV.
- This function prevents children from controlling the TV when parents are not home.
* How to Unlock Key-Lock :
- Bring up the Menu window using the remote control and switch off the Key-Lock.
- When the remote control is not available, press the Power button within 0.5 second while pressing the Menu
button on the top of the TV.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Information
You can view the channel information and setting status by pressing the “INFO” button on the remote control.
INFO
In case of applying TV input
PROG NO 5 FREQ 139.25
Press INFO button.
USER : MONO
CLOCK PM 12 : 30
ON TIME AM 7 : 20
OFF TIME PM 11 : 30
INFO
In case of applying VIDEO input
VIDEO
Press INFO button.
CLOCK PM 12 : 30
ON TIME AM 7 : 20
OFF TIME PM 11 : 30
INFO
In case of applying S-VIDEO input
S-VIDEO
Press INFO button.
CLOCK PM 12 : 30
ON TIME AM 7 : 20
OFF TIME PM 11 : 30
INFO
In case of applying SCART input
SCART
Press INFO button.
CLOCK PM 12 : 30
ON TIME AM 7 : 20
OFF TIME PM 11 : 30
INFO
In case of applying COMPONENT input
COMPONENT
Press INFO button.
1080i
CLOCK PM 12 : 30
ON TIME AM 7 : 20
OFF TIME PM 11 : 30
69
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
INFO
In case of applying PC input
PC
Press INFO button.
1024 x 768
CLOCK PM 12 : 30
ON TIME AM 7 : 20
OFF TIME PM 11 : 30
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext Feature
Most TV channels provide written information services via teletext.
Information provided includes with the next entry it is same :
- TV programme times
- News bulletins and weather forecasts
- Sports results
- Travel information
Teletext information is often divided between several pages displayed in sequence,
which can be accessed by :
- Entering the number
- Selecting a title in a list
- Selecting a coloured heading (FASTEXT SYSTEM)
- Travel information
Teletext OSD(On-Screen-Display) Picture
Current page number or
search indications.
Data and Time
Broadcasting channel identity
A
B
C
D
Selected page number
E
F
Text
Status information
Fastext information
71
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Displaying the Teletext Information
You can display Teletext information at any time on your TV.
For Teletext information to be display correctly channel reception to be stable otherwise
- Information maybe missing or some pages may not be displayed.
TTX
Press TTX button to activate the TTX mode.
1
SOURCE
(The contents of page 252 are displayed.)
EXIT
MAIN
If you wish to display the actual broadcast
at the same time as the teletext page, press TTX/MIX button.
- If the button is pressed a second time,
INFO
MIX
S.MODE
INDEX
SIZE
SLEEP
LIST/FLOF
REVEAL
TTX
MIX
TTX
2
3
STORE
the function will be deactivated.
HOLD
SUB PAGE
Press TTX button again to
exit from the teletext display.
Selecting Display Options
When you have displayed a teletext page, you can have various options to suit you requirements.
BUTTON DISPLAY(ACTION)
HOLD
When the secondary pages are displayed in sequence, press the HOLD button.
To freeze the current display page, press the HOLD button again to resume.
HOLD
SUB PAGE
REVEAL
SUB PAGE
REVEAL
Displays a secondary page by entering its number.
Displays concealed text such as answer to quiz games.
To return to normal viewing, press this button again.
Whenever you press this button, the letter size of the page will be changed.
Once press : The letter of the top half page enlarge to double size.
Twice press : The letter of the bottom half page enlarge to double size.
Three times press : Return to the normal viewing
SIZE
SIZE
STORE
STORE
To store teletext page in list mode.
Return to LIST or FLOF mode.
LIST/FLOF
LIST/FLOF
72
Download from Www.Somanuals.com. All Manuals Search And Download.
BUTTON
INDEX
DISPLAY(ACTION)
INDEX
To display the index page, press the INDEX button.
PAGE UP
PAGE DOWN
Displays the next page.
Displays the previous page.
While viewing TTX information, PIP, POP, Multi Function is not supported.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting ..........................................................................75
Care and Cleaning ......................................................................77
Product Specifications ................................................................78
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Installation Problems
Symptom
Possible solution
How can I install an
antenna?
Refer to pages 23~24.
TV screen is not clear after
installing an indoors
antenna.
Indoors antenna may experience poor reception due to surrounding buildings.
Please install an outdoors antenna or wireless antenna.
How can I view cable
broadcasting?
Please install a cable broadcasting receiver (Converter).
Picture Problems
Symptom
Possible solution
Neither picture nor
sound comes up.
Check whether power is on.
Check whether the power is cut or whether power cord is properly connected.
Try to plug another product’s power cord to the outlet the LCD TV is plugged into.
Picture turns on slowly
after power is on.
This symptom is not a malfunction. This delay is designed to prevent the
distorted and noisy picture when power is on. However, if the picture does not
appear more than 5 minutes after power is on, call a service center.
Vertical and horizontal lines
and web patterns briefly
appear on the
This symptom may be caused by interference from other electric appliances.
Please avoid using a cordless phone, hairdryer, and electric drill, etc.
picture and shake.
Input Source information only
appears on black screen.
Check whether your TV is properly connected to external devices.
Poor reception on some
channels.
Check whether you selected proper channels. Try re-orienting your antenna.
Ensure LNA is activated.
Black and white on some
channels.
Check other channels for black and white screen. Adjust colour.
TV won’t turn on.
Ensure the power cord is plugged.
Adjust brightness.
Screen is too bright or too
dark.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Auto On does not work.
Ensure to use the remote control or power button on the product to turn off your
TV. If you unplug the power cord, the stand-by consumption power becomes 0
(zero), which causes the programmed time to be erased.
After setting the time,
I turned TV off and turn it on.
The programmed information
has been erased.
Ensure to use the remote control or power button on the product to turn off your
TV. If you unplug the power cord, the stand-by consumption power becomes 0
(zero), which causes the programmed time to be erased.
Audio Problems
Symptom
Possible solution
Too much noise occurs.
Check whether the audio setting is in the Stereo mode. In the Stereo mode, the
sound may be distorted in the area where experiences poor reception or is
located far away from a TV broadcasting station.
No sound while viewing a
cable channel
Make sure an audio or audio/video component is securely inserted into the
appropriate jacks. Check other channels for sound. Check the volume settings on
the cable broadcasting receiver.
Picture is OK but sound does
not come out.
Try to press volume up/volume down buttons of your remote control.
One of the speakers does not
produce sound.
Select sound balance and make proper adjustment. (Page 41)
Check the speaker connection cables.
General
Symptom
Possible solution
Remote control won't work.
Check whether there is a blocking object between the remote control and LCD TV.
Make sure your LCD TV is Power On. (In case of normal, LED on the front panel is
in Red.)
Check whether batteries are inserted with proper polarities(+, -).
When the batteries are worn out, replace with new ones.
Where does the S-Video
cable plug in for audio
output?
Connect the two Audio jacks from the S-Video cable to the left and right ports on
the Composite.
Strange noises are heard.
Ticking noise during or after watching is caused by the change of ambient
environment such as humidity and temperature, which is characterized by plastic
products. Strange ticking noise occurs because a signal is suddenly transmitted
to the LCD panel. So, this is not a malfunction.
I tried to use the TV screen
as a PC monitor
Adjust the resolution referring to the standard signal mode table. Check the
specification of your video card installed in your PC. If your video card does not
work in supported hardware. Try upgrading the video card’s driver.
but it doesn’t work.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
Cabinet Cleaning
Wipe a soft dry cloth.
Do not use inflammables like Benzene or Thinner, or wet clothes.
Do not scratch the panel of TV with a fingernail or pointed object.
Screen Cleaning
Clean the screen with a soft cloth moistened in mild glass
detergent and dry with a soft cloth.
Never use any solvent on the screen such as Acetone, Benzene, or
Thinner, etc.
Cleaning Inside
When the inside needs to be cleaned, contact a service center or
distribution agent where the item is purchased.
It is recommended cleaning is complete before the rainy season.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
HYUNDAI LCD TV HQL170WR/200NR
Product Specifications
MODEL
HQL170WR
HQL200NR
Input/Output
S-Video
1 EA(with common A/V Audio)
1 EA (Input, with Audio)
1 EA (with Audio)
1 EA
1 EA(with common A/V Audio)
1 EA (Input, with Audio)
1 EA (with Audio)
1 EA
A/V (RCA)
Component(Y/Cb/Cr)
RF
SCART
1 EA (FULL)
1 EA (FULL)
PC Connector
D-SUB
D-SUB
Recommended. Resolution 1024 x 768 @ 60 Hz
640 x 480 @ 60 Hz
PC Audio
Audio
Headphone
Supply
PC Audio
1 EA
1 EA
Power
AC 100 - 240 V, 50/60 Hz
Typical 70 W
AC 100 - 240 V, 50/60 Hz
Typical 80 W
Consumption
Saving
< 5 W
< 5 W
Dimension(W x D x H mm)
Weight
560 x 184 x 361 (with stand)
6.5 Kg (with stand)
Remote Control, Key Control
650 x 184 x 450 (with stand)
8.5 Kg (with stand)
Remote Control, Key Control
Control Type
- Specification is subject to change without notice for performance improvement.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
USA
Hyundai ImageQuest America
3101 North First Street San Jose, CA 95134
Hyundai tech support
Tel : +800-568-0061,408-232-8654
Fax : +408- 232-8146
e-mail : [email protected]
AVC USA. INC.
777 Mark Street, Wood Dale, IL 60191
Tel : 630-595-0123 / 800-568-0060
Fax : 630-595-2345 / 800-784-9422
e-mail : [email protected]
NEW ZEALAND
TRANSTECH DISTRIBUTORS Ltd.
PO Box 12985 Penrose,
Auckland New Zealand
Tel : 09-571-0775
Fax : 09-571-0776
e-mail : [email protected]
AUSTRALIA
Thomas Electronics Australia Pty Ltd.
3 Sheridan Close
Milperra NSW 2214, Australia
Tel : +61 2 9773 7400
Fax : 61 2 9773 7177
Attn : Ms. Shiely Poniman
GERMANY
Hyundai ImageQuest Europe GmbH
Geheimrat Hummel Platz 2
65239, Hochheim, Germany
Tel : 06146 / 904 444
Fax : 06146 / 904 410
e-mail : [email protected]
JAPAN
Hyundai ImageQuest JAPAN
Shin-Hibiya Bldg, East 5F 1-3-6
Uchisaiwai-Cho, Chiyoda-ku,
Tokyo, Japan 100-0011
Tel : 03-5157-2286
Fax : 03-5157-2284
e-mail : [email protected]
C/S P.J.Kim
P/N 632 0238 302 Rev.01
Download from Www.Somanuals.com. All Manuals Search And Download.
|