HUV 5420 DXR Homologated
Diesel Vehicle for Europe
Owner’s Manual
[Refer to back cover for applicable build code range]
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTICE
This manual is valid for vehicles manufactured in the build code range provided on the back cover of this manual. If the
vehicle build code is different from that shown on the back cover of this manual, please contact your nearest dealer
this manual.
Your authorized representative checked the vehicle before it was delivered to you and will provide you a copy of the
completed vehicle warranty registration form. No other warranties, express or implied, are contained herein.
Husqvarna is not liable for errors in this manual or for incidental or consequential damages that result from the
use of the material in this manual.
This manual contains proprietary information that is protected by copyright. All rights are reserved. No part of this
manual may be photocopied, reproduced, or translated to another language without the written consent of Husqvarna,
Inc.
The information contained in this document is subject to change without notice.
Husqvarna reserves the right to make design changes to vehicles without obligation to make these changes on
units previously sold.
If in English, this manual is the Original Instructions provided by the manufacturer. If in any language other than
English, this manual is a translation of the Original Instructions.
Copyright © 2009 Husqvarna AB (publ). All rights reserved. Husqvarna and
other product and feature marks are trademarks of Husqvarna Group.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
FOREWORD
Thank you for choosing Husqvarna, the name most widely recognized as the industry leader in vehicle efficiency and
long-lasting value. You have chosen the finest utility vehicle on the market. Please protect your investment and
ensure that your Husqvarna vehicle(s) provides years of reliable, superior performance by reading and following the
maintenance instructions in this manual.
Your comfort and safety are important to us, so we urge you to read and follow the step-by-step operating instructions
and safety procedures in this manual. These instructions must be followed in order to avoid the risk of severe personal
injury. If you rent or loan your vehicle to others, we recommend that you ask them to read this manual before they
operate the vehicle.
Husqvarna products are backed by a customer support system designed to offer you fast, courteous service. In the
event your Husqvarna vehicle needs repairs or service, please contact your local authorized Husqvarna dealer or
distributor; he will be able to provide technical advice, perform warranty work, and sell parts and service manuals.
For the name and address of the authorized Husqvarna dealer or distributor nearest you, logon to our web site
We hope you will consider this owner’s manual a permanent part of your Husqvarna vehicle. If you sell the vehicle,
please include the manual so that the next owner will have the important operating, safety, and maintenance
information it contains.
Page 2
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Safety Decal and Feature Identification .................................................................................................................. 4
Practice Safety ..................................................................................................................................................... 6
Safety Details....................................................................................................................................................... 7
General Warnings................................................................................................................................................. 8
General Information .............................................................................................................................................11
Model Identification..............................................................................................................................................11
Controls and Indicators ....................................................................................................................................... 12
Roll-Over Protective Structure and Seat Belts....................................................................................................... 17
Pre-Operation and Daily Safety Checklist............................................................................................................. 20
Driving Instructions ............................................................................................................................................. 21
Loading and Unloading Cargo ............................................................................................................................. 24
Vehicle Load Capacities...................................................................................................................................... 24
Towing with the Vehicle ....................................................................................................................................... 26
Transporting on a Trailer ..................................................................................................................................... 26
Periodic Service Schedule................................................................................................................................... 29
Periodic Lubrication Schedule ............................................................................................................................. 32
Brake Fluid Reservoir ......................................................................................................................................... 33
Engine Oil .......................................................................................................................................................... 33
Gearcase Lubrication.......................................................................................................................................... 38
Engine Coolant................................................................................................................................................... 39
Air Intake System ............................................................................................................................................... 40
Fueling Instructions............................................................................................................................................. 41
Using A Booster Battery (Jump Starting) .............................................................................................................. 45
Cleaning the Vehicle ........................................................................................................................................... 46
Vehicle Specifications ......................................................................................................................................... 48
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Decal and Feature Identification
SAFETY DECAL AND FEATURE IDENTIFICATION
The following pages contain safety decal and feature identification information. For detailed information on specific
features, read the appropriate section in this manual.
HUSQVARNA HUV 5420 DXR HOMOLOGATED DIESEL VEHICLE
6
4
1
2
3
5
377
Decal, Hot Surface Warning (on coolant pipes and
underside of seats) (on bed seal)
Decal, Diesel Fuel Warning (on frame, near fuel
tank)
1
2
3
102458901
102459001
102459101
4
5
6
102459201
102459501
102884301
Decal, Hot Manifold Warning (on engine, near
manifold)
Decal, Rotating/Hot Parts Warning (on frame near
battery)
Decal, Ground Warning (on vehicle frame, near
battery)
Decal, Operating Instructions (on instrument panel)
Page 4
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Decal and Feature Identification
HUSQVARNA HUV 5420 DXR HOMOLOGATED DIESEL VEHICLE
!
WARNING
5
8
7
3
6
1
2
4
9
10
378
Decal, Trailer Hitch Tongue Weight Notice (on
trailer/receiver hitch)
Decal, Rotating Parts Warning (on vehicle body,
under seat)
1
1011553
6
102460201
Decal, Crush Area Warning (behind seat, near
cargo bed)
2
3
4
5
101609401
102224001
102459301
102459401
7
8
9
102884401
102961201
103332501
Decal, Rollover Warning (on instrument panel)
Decal, ROPS Warning (on ROPS)
Decal, Rotating Parts Warning (on frame)
Decal, Bed Latch Warning (on vehicle body, below
bed latch)
Decal, Vehicle Loading Instructions (on cargo bed)
Decal, Vehicle Loading Instructions (on cargo bed)
Decal, Young Driver Warning (on ROPS)
10 103332601
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Practice Safety
PRACTICE SAFETY
399
Figure 1 Practice Safety
Safety signs like you see above may at first seem shocking, but their impact is mild compared with the reality
of severe personal injury.
Your safety and satisfaction are of the utmost importance to us. That is why before operating the vehicle, we urge
you to review the information in this manual. Understand and become familiar with the DANGER, WARNING, and
CAUTION statements and procedures it contains, along with the safety decals that are affixed to your vehicle.
Take time to understand the language of safety. It is a language that can save your life.
Page 6
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Details
SAFETY DETAILS
WARNING
• This owner’s manual should be read completely before attempting to drive or service the vehicle.
Failure to follow the instructions in this manual could result in property damage, severe personal
injury, or death.
• The homologated diesel vehicle is equipped to operate at a top speed of 25 mph (40 km/h) and is
intended for use as a low-speed vehicle.
WARNING
WHEN OPERATING VEHICLE ON PUBLIC ROADS
• THIS VEHICLE OFFERS MUCH LESS CRASH PROTECTION THAN A REGULAR CAR, VAN, OR TRUCK.
THIS MEANS A HIGHER RISK OF INJURY OR DEATH IN COLLISIONS, EVEN AT LOW SPEEDS.
• The higher the speed of the traffic around you, the higher the risk of injury.
• To reduce these risks:
– Avoid roads with regular traffic, even if the speed limit is low.
– Whenever possible, stay on roads and lanes limited to low-speed vehicles.
– Wear your seat belts at all times.
– Avoid operating vehicle at night, because your vehicle may be difficult for others to see.
– Never drink and drive.
– To help avoid rollovers, SLOW DOWN BEFORE MAKING SHARP TURNS.
It is important to note that some vital statements throughout this manual and on the decals affixed to the vehicle are
preceded by the words DANGER, WARNING, or CAUTION. For your protection, we recommend that you take special
notice of these safety precautions. Safety precautions are essential and must be followed.
If any of the operation or warning decals on the vehicle become damaged, have been removed, or cannot be easily
read, they should be replaced immediately to avoid possible property damage, personal injury, or death. Contact
your dealer.
DANGER
• A DANGER indicates an immediate hazard that will result in severe personal injury or death.
WARNING
• A WARNING indicates an immediate hazard that could result in severe personal injury or death.
CAUTION
• A CAUTION with the safety alert symbol indicates a hazard or unsafe practice that could result in
minor personal injury.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
General Warnings
CAUTION
• A CAUTION without the safety alert symbol indicates a potentially hazardous situation that could
result in property damage.
GENERAL WARNINGS
The following safety statements must be heeded whenever the vehicle is being operated, repaired, or serviced.
See Safety Decal and Feature Identification on page 4. Other specific safety statements appear throughout
this manual and on the vehicle.
DANGER
• Battery – Explosive gases! Do not smoke. Keep sparks and flames away from the vehicle and service
area. Ventilate when charging or operating vehicle in an enclosed area. Wear a full face shield and
rubber gloves when working on or near batteries.
• Diesel – Flammable! Explosive! Do not smoke. Keep sparks and flames away from the vehicle and
service area. Service only in a well-ventilated area.
• Do not operate engine in an enclosed area without proper ventilation. The engine produces carbon
monoxide, which is an odorless, deadly poison.
• The vehicle will not provide protection from lightning, flying objects, or other storm-related hazards. If
caught in a storm while driving a Husqvarna vehicle, exit the vehicle and seek shelter in accordance
with applicable safety guidelines for your location.
WARNING
• Follow the procedures exactly as stated in this manual, and heed all DANGER, WARNING, and
CAUTION statements in this manual as well as those on the vehicle.
• Do not leave children unattended on vehicle.
• Children requiring a child safety seat must not ride on the vehicle. Comply with state and local laws
pertaining to child safety.
• The driver and passenger must be restrained at all times with the seat belts provided to help prevent
injury in the event of sudden braking, collision, or roll-over.
• No more than one person per bucket seat at one time. No more than two persons per bench seat at
one time. Do not allow people to ride in any part of the vehicle that is not equipped with a seat and a
seat belt. Do not allow a passenger to hold a child in his or her lap while the vehicle is moving.
• Prior to leaving the vehicle unattended or servicing the vehicle set the park brake, place the
Forward/Reverse handle in the NEUTRAL position, turn the key switch to the OFF position, and remove
the key. Chock the wheels when servicing the vehicle.
• Improper use of the vehicle or failure to properly maintain it could result in decreased vehicle
performance, severe personal injury, or death.
• Any modification or change to the vehicle that affects the stability or handling of the vehicle, or
increases maximum vehicle speed beyond factory specifications, could result in severe personal
injury or death.
• Check the vehicle for proper location of all vehicle safety and operation decals and make sure they are
in place and are easy to read.
• For vehicles with cargo beds, remove all cargo before raising the bed or servicing the vehicle. If the
vehicle is equipped with a prop rod, ensure that it is securely engaged while bed is raised. Do not
close bed until all persons are clear of cargo bed area. Keep hands clear of all crush areas. Do not
WARNING CONTINUED ON NEXT PAGE
Page 8
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
General Warnings
WARNING
drop cargo bed; lower gently and keep entire body clear. Failure to heed this warning could result in
severe personal injury or death.
• Only trained technicians should service or repair the vehicle. Anyone doing even simple repairs or
service should have knowledge and experience in electrical and mechanical repair. The appropriate
instructions must be used when performing maintenance, service, or accessory installation.
• To avoid unintentionally starting the vehicle, disconnect battery. See Disconnecting the Battery –
• Frame ground – Do not allow tools or other metal objects to contact frame when disconnecting battery
cables or other electrical wiring. Do not allow a positive wire to touch the vehicle frame, engine, or
any other metal component.
• Wear safety glasses or approved eye protection when servicing the vehicle. Wear a full face shield and
rubber gloves when working on or near batteries.
• Do not wear loose clothing or jewelry such as rings, watches, chains, etc., when servicing the vehicle.
• Use insulated tools when working near batteries or electrical connections. Use extreme caution to
avoid shorting of components or wiring.
• When servicing the vehicle with part of the vehicle on jack stands, do not operate the engine with the
Forward/Reverse handle in either the FORWARD or REVERSE position. The all-wheel drive system will
engage any wheel(s), front or rear, with traction.
DISABLING THE VEHICLE
1. Set the park brake.
2. Turn the key switch OFF and remove the key.
3. Place the Forward/Reverse control in the NEUTRAL position.
4. In addition, chock the wheels if servicing or repairing the vehicle.
DISCONNECTING THE BATTERY – DIESEL VEHICLES
2. Disconnect the battery cables, negative (–) cable first, as shown (Figure 2).
CONNECTING THE BATTERY – DIESEL VEHICLES
1. Connect the battery cables, positive (+) cable first.
2. Tighten battery terminals to 80 in-lb (9 N·m).
3. Coat terminals with Battery Terminal Protector Spray (P/N 603 00 00-03) to minimize corrosion.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
General Warnings
1. Remove negative battery cable.
2. Remove positive battery cable.
Connect battery cables in reverse order.
188
189
Figure 2 Battery Cable Removal
Figure 3 All-Wheel Drive Warning
RECYCLING LEAD-ACID BATTERIES
WARNING
• Lead-acid batteries contain lead (Pb), other metals, acids and other compounds. If improperly handled,
they can contaminate both water and soil, causing environmental damage and personal injury.
Lead-acid batteries are identified by the symbol shown below and should be properly recycled (Figure 4). They cannot
be disposed as municipal waste and must be collected separately. Responsibility for environmental protection must be
shared, not only by the manufacturers of the batteries, but by people who use the batteries as well. Please contact
your nearest Husqvarna dealer or distributor for information on how to properly recycle your batteries.
1403
Figure 4 Dispose of Lead-acid Batteries Properly
Page 10
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
GENERAL INFORMATION
This homologated vehicle is designed for operation on public roads. Its construction also allows operation on rough
terrain with inclines not exceeding 20%.
This manual includes operating procedures, maintenance, and regular servicing information for the Husqvarna HUV
5420 DXR vehicles that have been homologated for Europe.
MODEL IDENTIFICATION
The vehicle identification number (Figure 5) is located on the center cross bar underneath the bed at the rear of
the car. See following NOTE.
1437
Figure 5 Vehicle Identification Number Decal
NOTE: Have the vehicle identification number available when ordering parts or making inquiries.
Build Code: The build code (4) is a five-digit number that appears on the vehicle serial number decal (Figure 6). The
build code exists to enable the user to identify the correct owner’s manual for a vehicle. This owner’s manual is valid
for the build code range indicated on the back cover of this owner’s manual.
1400
Figure 6 Serial Number Decal with the Vehicle Build Code
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
CONTROLS AND INDICATORS
WARNING
• Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls and
operating procedures.
• Do not tamper with the high idle speed setting on the diesel vehicle. Doing so will void the warranty,
as well as damage the engine and other components, and could result in property damage, personal
injury, or death due to unsafe speeds.
• Do not shift the Forward/Reverse handle while the vehicle is in motion.
• Engine must be at idle before shifting the Forward/Reverse handle. Failure to do so may result in
injury to inattentive passengers and (or) damage to the vehicle.
• To avoid unintentionally starting or rolling the vehicle, place attachment on the ground, set the park
brake, place the Forward/Reverse handle in the NEUTRAL position, turn the key switch to the OFF
position, and remove the key when leaving the vehicle.
229
Figure 7 Instrument Panel
1. Accelerator Pedal
6. Forward/Reverse Handle
7. Key Switch
11. 12-volt Accessory Outlet
12. Headlight/Taillight Control
13. Electric Bed Lift Switch
14. Turn Signal Indicator Lights
2. Brake Pedal
3. Park Brake Pedal
8. Fuel Gauge Meeting
9. Low Oil Warning Light
10. High-Temperature Warning Light
4. Park Brake Release Handle
5. Steering Adjustment Lock Lever
Page 12
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
WARNING
• Moving parts! Keep clear of the engine compartment while the engine is running.
CAUTION
• Do not shift the Forward/Reverse handle while the accelerator pedal is pressed. Shift the handle only
when the vehicle is at a complete stop and the engine is at idle. Failure to heed this caution could
result in damage to the transmission.
NOTE: The key can be removed only when the key switch is in the OFF position.
KEY SWITCH
The key switch (7) is mounted on the instrument panel to the right of the steering column (Figure 7). It has four
positions: PREHEAT, OFF, ON, and START.
Use the PREHEAT feature if the temperature falls below –5 °C (23 °F). Do not hold the key in the PREHEAT position
longer than 20 seconds. To preheat the glow plugs in cold weather, turn the key to the PREHEAT position, and hold it
there for 10-15 seconds. Then turn the key to the START position, and hold it there until the engine starts. If the engine
does not start after 10-15 seconds, turn the key to the OFF position and repeat the procedure. Once the engine starts,
release the key and it will return to the ON position. The engine will idle in neutral. The engine will continue to idle until
the key is turned to the OFF position. See previous WARNING, CAUTION, and NOTE.
FORWARD/REVERSE CONTROL
The Forward/Reverse handle (6) is located on the right side of the instrument panel (Figure 7). The handle has three
distinct positions: FORWARD (A), NEUTRAL (B), and REVERSE (C). Push the handle up to operate the vehicle in the
forward direction, or pull the handle down to operate the vehicle in reverse. The engine can be started only when the
handle is in the NEUTRAL (middle) position. The engine must be at idle before shifting the Forward/Reverse handle.
See preceding WARNING and CAUTION.
Husqvarna vehicles operate at a reduced speed in reverse. The reverse buzzer will sound as a warning when the
Forward/Reverse handle is in the REVERSE position.
ACCELERATOR PEDAL
The accelerator pedal (1) is the pedal farthest to the right (Figure 7).
With the engine running and the Forward/Reverse handle in the FORWARD or REVERSE position, vehicle speed
will increase as the accelerator pedal is pressed. When the accelerator pedal is released, it will return to the original
position and the engine will idle. See preceding WARNING and CAUTION.
BRAKE PEDAL
The brake pedal (2) is located to the immediate left of the accelerator pedal (Figure 7). To slow or stop the vehicle,
press the brake pedal.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
BRAKE LIGHTS
The brake lights illuminate when the brake pedal is pressed. When the park brake is engaged, the brake lights will
turn off. See following NOTE.
NOTE: When the key switch is in the OFF position, the brake lights are disabled.
PARK BRAKE
The park brake pedal (3) is located to the left of the brake pedal (Figure 7). To engage the park brake, first apply
pressure to the brake pedal, then firmly press the park brake pedal until it latches into place. To disengage the park
brake, pull the park brake release handle (4) (Figure 8). See following WARNING.
WARNING
• The park brake has multiple locking positions and should be firmly locked to prevent the vehicle
from rolling.
191
Figure 8 Park Brake Release
STEERING ADJUSTMENT LOCK
The steering wheel position is adjustable. To adjust the steering wheel position, press down on the steering adjustment
lock lever (5), then move the steering wheel to the desired position (Figure 7). While holding the steering wheel in
the desired position, pull up on the steering adjustment lock lever to firmly lock the steering column in position.
See following WARNING.
WARNING
• Ensure that the steering wheel lock is fully engaged before operating the vehicle.
Page 14
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
12-VOLT ACCESSORY OUTLET
The 12-volt accessory outlet (11) is located to the right of the key switch (Figure 7). It provides a constant 12VDC with
the key switch in the ON or OFF position. See following NOTE.
NOTE: Extended use of this accessory outlet can cause the battery to become heavily discharged.
LOW OIL WARNING LIGHT
The low oil warning light (9) is located on the instrument panel just to the left of the steering column (Figure 7). If the
warning light lights up, oil should be checked and added to the engine as necessary before vehicle use continues. The
vehicle should never be driven when the low oil warning light remains lit. If the warning light alternately lights and
darkens, the vehicle may be driven, but oil should be added at the first opportunity. If the oil level is correct and the
warning light remains lit, have a trained technician check the vehicle. See following CAUTION.
CAUTION
• Failure to add oil immediately when the low oil warning light stays on may result in permanent
engine damage.
FUEL GAUGE/HOUR METER
The fuel gauge and hour meter (8) are housed together on the right side of the instrument panel (Figure 7). The fuel
gauge operates when the key switch is in the ON position and allows the operator to monitor the fuel level in the vehicle.
The hour meter operates only when the engine is running, and should be used by the trained technician to track vehicle
usage and determine when periodic service procedures are required. See Periodic Service Schedule on page 29.
HEADLIGHT/TAILLIGHT CONTROL
The headlight/taillight control (12) is located on the left side of the instrument panel (Figure 7). Press the headlight
rocker switch to turn the headlights on or off. See following NOTE.
NOTE: Using the headlights for extended periods while the engine is either off or idling will discharge the battery.
TURN SIGNAL
There are two turn signal indicator lights (14) on the instrument panel (Figure 7). The upper symbol indicates the turn
direction for the vehicle; the lower symbol indicates the turn direction for an attached trailer.
The turn signal control (1) is mounted on the steering column (Figure 9). Move the handle up to indicate a right-hand
turn. Move the handle down to indicate a left-hand turn. Return the handle to the center position after completing a turn.
NOTE: If the turn signal light burns out, the indicator light on the instrument panel will flash at twice the normal speed.
If an attached trailer’s turn signal light burns out, the indicator light will not flash.
HORN
The horn button (3) is located on the end of the turn signal handle (Figure 9). Press the button in to sound the horn.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
227
Figure 9 Turn Signal and Horn Controls
ELECTRIC BED LIFT
The electric bed lift switch (13) is located on the instrument panel to the left of the key switch (Figure 7). To lift the
bed, pull up and hold the toggle switch in the upper position. Release switch to stop lifting operation. To close the
bed, press down and hold switch in the lower position. The bed lift will make a loud clicking sound to signal the
bed is in the rest position.
HAZARD LIGHTS
The hazard light switch (2) is located behind the turn signal handle (Figure 9). To activate the hazard lights, make sure
that the turn signal handle is in the center (off) position, then pull the switch marked “HAZARD” until it is locked in place.
To deactivate the hazard lights, move the turn signal handle in either direction and return it to the center position.
HIGH-TEMPERATURE WARNING LIGHT
The high-temperature warning light (10) is located on the instrument panel to the left of the steering column, next
to the low oil warning light (9) (Figure 7). The diesel engine is liquid-cooled; if the engine coolant has exceeded its
normal safe operating temperature, the warning light will illuminate. If the warning light lights up, stop the vehicle and
allow it to idle for approximately five minutes before stopping the engine. Contact a Husqvarna dealer/distributor or a
trained technician. See following WARNING.
WARNING
• Allow the engine to cool before servicing the engine coolant system. Engine coolant can cause
severe burns.
Page 16
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Roll-Over Protective Structure and Seat Belts
ROLL-OVER PROTECTIVE STRUCTURE AND SEAT BELTS
This Husqvarna HUV 5420 DXR vehicle is equipped with a Roll-Over Protective Structure (ROPS) and seat belts for
each occupant. See following WARNING.
WARNING
• The ROPS must be properly installed before operating the vehicle. Husqvarna strongly urges that the
vehicle’s occupants be properly restrained at all times with the seat belts provided.
Pregnant woman: Consult your doctor for specific recommendations. The seat belt should be worn securely and
as low as possible over the hips and not on the waist.
Injured person: Depending on the injury, first check with your doctor for specific recommendations.
To secure the seat belt, sit up straight and well back in the seat. Pull the seat belt out of the retractor and insert the
tab into the buckle. A click will be heard when the tab locks into the buckle. Position the lap belt as low as possible
on the hips – not on the waist.
The retractor will lock the belt during a sudden stop. It also may lock if the occupant leans forward too quickly. A slow,
easy motion will allow the belt to extend, and the occupant can move freely. If the seat belt cannot be pulled out of the
retractor, firmly pull the belt and release it. It should then pull smoothly out of the retractor.
To release the seat belt, press the buckle release button (1) and allow the belt to retract (Figure 10). If the belt does
not retract smoothly, pull it out and check for kinks or twists. Then make sure it remains free of twists as it retracts.
194
Figure 10 Release Seat Belt
WARNING
• Do not operate the vehicle with the ROPS removed. Doing so could result in property damage,
personal injury, or death.
• Do not remove or modify any component of the ROPS structure. Doing so will result in voiding the
ROPS certification and could weaken the ROPS, resulting in serious injury or death.
WARNING CONTINUED ON NEXT PAGE
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Roll-Over Protective Structure and Seat Belts
WARNING
• Do not operate the vehicle if the ROPS is damaged. If the ROPS is damaged, replace the structure.
Do not attempt repair.
• The driver and passenger must be restrained at all times with the seat belts provided to help prevent
injury in the event of sudden braking, collision, or roll-over.
• In the event of a roll-over, do not attempt to jump or otherwise exit the vehicle. Remain seated with
seat belt fastened and with arms and legs inside the vehicle.
• After inserting the tab, make sure the tab and buckle are locked and that the belt is not twisted.
• Loose fitting seat belts could increase the chance of injury due to sliding under the belt if sudden
braking should occur. Keep the seat belt snug and positioned as low on the hip bone as possible.
• Use a single seat belt for one person at a time. Do not use a single seat belt for two or more people –
this includes children.
• No more than one person per bucket seat at one time. Do not allow people to ride in any part of the
vehicle that is not equipped with a seat and a seat belt. Do not allow a passenger to hold a child in his
or her lap while the vehicle is moving.
• The Husqvarna vehicle is not designed to meet child seat compatibility requirements. Children
requiring a child safety seat must not ride on the vehicle. Comply with state and local laws pertaining
to child safety.
CAUTION
• Be careful not to damage the seat belt webbing or hardware.
• Inspect the seat belt system periodically. Check for cuts, fraying, and loose parts. Damaged parts
should be replaced immediately. Do not disassemble or modify the system.
• Keep seat belts clean and dry. If cleaning is necessary, use a mild soap and lukewarm water solution.
Do not use bleach, dye or abrasive cleaners as they may severely weaken the seat belts.
• Do not insert coins, clip, etc. in the buckle as this may prevent the tab from locking into the buckle
properly.
• If the seat belt does not function normally, contact your dealer/distributor or trained technician
immediately. Do not occupy the seat until the seat belt is repaired.
DRIVERS SIDE SEAT CONTROLS
Drivers Side Seat Adjustments
Use the position adjustment lever (1) to move the seat closer to or farther from the steering wheel (Figure 11). To
adjust the seat position, sit in the driver seat and raise the position adjustment lever. Slide the seat either forward or
backward until it reaches the desired position, then return the lever to its original position.
The height adjustment knob (2) enables you to modify the seat height. Use the seat height adjustment together with
the seat tension adjustment until the seat feels comfortable.
To adjust the seat height, sit in the driver seat and pull out the adjustment knob (2). Move the knob toward the shorter
indicator to lower the seat height or toward the taller indicator to raise the seat height.
Seat tension controls how firm or soft the ride feels to the driver. Increasing seat tension results in a firmer ride;
decreasing tension results in a softer ride.
Use the tension adjustment lever (3) to adjust the seat tension. Pull out the tension adjustment handle (3), rotate
the handle to the plus (+) sign to increase tension or the minus (–) sign to decrease tension, and release the handle.
Firmly grasp the handle and move it from side to side to modify the tension adjustment. The tension indicator
(4) moves closer to the larger person when tension is increased and closer to the smaller person when tension is
decreased. See following NOTE.
Page 18
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Roll-Over Protective Structure and Seat Belts
NOTE: Use care to avoid excessively decreasing seat tension. Excessive adjustment will cause the adjustment bolt to
disengage from its bracket, and the adjustment handle will not function properly.
If the adjustment bolt becomes disengaged from its bracket, it must be hand-threaded back into the bracket.
226
228
Figure 11 Driver Seat Adjustments
Figure 12 Fully Engaged Seat Lock
Seat Locks
Three locks (5) secure the driver seat to the vehicle. These locks must be disengaged to access the driver side engine
compartment. All three seat locks must be fully and securely engaged before operating the vehicle. See following
WARNING.
WARNING
• Securely engage all seat locks before the vehicle is returned to operation. Failure to engage all
seat locks can result in ejection of the driver seat during vehicle operation and severe personal
injury or death.
To release the seat, all three locks must be released. Slide the driver seat as far forward as possible. See Drivers
Side Seat Adjustments on page 18. Use a flat-head screwdriver to turn each lock counterclockwise a full half-turn.
The first quarter turn separates the lock latch from the ROPS seat support, and the second quarter turn rotates the
latch away from the seat support. See following NOTE.
NOTE: Raising the cargo bed can further improve access to the seat locks.
To engage the seat locks, turn each lock a full half-turn clockwise. Verify that the notches (1) on each lock are aligned
to ensure the locks are securely engaged (Figure 12). See previous WARNING.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre-Operation and Daily Safety Checklist
PRE-OPERATION AND DAILY SAFETY CHECKLIST
Each Husqvarna vehicle has been thoroughly inspected and adjusted at the factory; however, upon receiving your new
vehicle(s), you should become familiar with the controls, indicators, and operation. Carefully inspect each vehicle to
ensure that it is in proper working condition before accepting delivery.
Use the following list as a guide to inspect the vehicle. This list should be used daily and in conjunction with the
Performance Inspection on page 20 and the Periodic Service Schedule on page 29 to ensure that the vehicle is in
proper working condition. Any problems should be corrected by a Husqvarna dealer/distributor or a trained technician.
• General: All the parts should be in place and properly installed. Be sure that all nuts, bolts, and screws are tight.
Check hose clamps for tight fit.
• Safety and information decals: Check to ensure that all safety and information decals are in place and can be
• ROPS: Check to ensure the ROPS is not damaged and all hardware is secure. See Roll-Over Protective
• Seat belts: Visually inspect for cuts, fraying, and loose parts. See Roll-Over Protective Structure and Seat
Belts on page 17.
• Tires: Check for proper tire pressure. Visually inspect tires for wear, damage, and proper inflation on a daily basis.
See Vehicle Specifications on page 48.
• Battery: Check electrolyte to ensure it is at the proper level (Figure 30). Check battery posts. Wires should be tight
and free of corrosion, and battery should be fully charged.
• Engine: Check for proper engine oil and coolant levels and leaks. See Engine Oil on page 33. Check air filter
and replace if necessary.
• Fuel: Check fuel level. See Fueling Instructions on page 41. Check fuel tank, lines, fuel cap, pump, and fuel
filters for fuel leakage. Drain water from the fuel filter. See Draining Water from Fuel Filter on page 42.
• Exhaust system: Check for leaks.
• Hydraulic brakes: Check fluid level. Fill with DOT 5 brake fluid only. See Brake Fluid Reservoir on page 33.
Wear-in the brakes before initial vehicle operation. On a flat, open surface, accelerate the vehicle to moderate
speed, then apply the brakes under modest, steady pressure. Repeat this procedure five times. See following
NOTE.
NOTE: Perform the wear-in procedure when the vehicle has been in operation for less than a week, or when the
brake pads or rotor have been replaced.
PERFORMANCE INSPECTION
After you have familiarized yourself with the vehicle controls and have read and understood the driving instructions,
take the vehicle for a test drive. Use the following list, in addition to the Pre-Operation and Daily Safety Checklist,
as a guide to inspect the vehicle daily for proper operation. Any problems should be corrected by a Husqvarna
dealer/distributor or a trained technician.
• Brakes: Be sure the brakes function properly. When brake pedal is fully pressed under moderate pressure, the
vehicle should come to a smooth, straight stop. If the vehicle swerves or fails to stop, have the brake system
checked and adjusted as required. When the brake pedal is fully pressed under heavy pressure, the pedal should
feel firm and the distance between the back of the pedal and the floorboard should be a minimum of 1.25 inches
(3.2 cm). Brake adjustment must be maintained so the brake pedal cannot be pressed to the floorboard under
any circumstance.
Page 20
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Driving Instructions
• Park brake: When latched, the park brake should lock the wheels and hold the vehicle stationary on an incline of
20% or less.
• Reverse buzzer: The reverse buzzer should sound as a warning when the Forward/Reverse handle is in the
REVERSE position.
• Steering: The vehicle should be easy to steer and should not have any play in the steering wheel. Be sure the
steering wheel adjustment lever is securely locked into position.
• Accelerator: After starting the engine with the key switch and placing the Forward/Reverse handle in the
FORWARD position, the vehicle should accelerate smoothly to full speed as the accelerator pedal is pressed. When
the pedal is released it should return to the original position, and the engine should idle. The vehicle operates at
reduced speed in reverse.
• Governor: Check maximum vehicle speed. The vehicle should operate in forward at a maximum speed of 25
mph (40 km/h) on a level surface.
• General: Listen for any unusual noises such as squeaks or rattles. Check the vehicle’s ride and performance.
Have a Husqvarna dealer or a trained technician investigate anything unusual.
DRIVING INSTRUCTIONS
WARNING
• Only licensed drivers should be allowed to drive the vehicle.
• Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls and
operating procedures.
• No one under the age of 16 years should be allowed to drive the vehicle.
• No more than one person per bucket seat at one time. Do not allow people to ride in any part of the
vehicle that is not equipped with a seat and a seat belt. Do not allow a passenger to hold a child in his
or her lap while the vehicle is moving.
• Do not allow riders in the cargo bed.
• For night use, the vehicle must be equipped with headlights, taillights, and reflectors.
• The vehicle is not specially equipped for handicapped persons:
– Be sure all passengers are capable of securing themselves in a moving Husqvarna vehicle before
allowing them to ride in one.
– Be sure all persons can properly operate the vehicle prior to allowing them to drive the vehicle.
• Stop the vehicle before shifting the Forward/Reverse handle. Engine must be at idle before shifting
the Forward/Reverse handle. Failure to do so may result in injury to inattentive passengers and
(or) damage to the vehicle.
• To help avoid being struck, do not stand in front of or behind the vehicle.
• Do not leave children unattended on vehicle.
• Children requiring a child safety seat must not ride on the vehicle. Comply with state and local laws
pertaining to child safety.
• Operate the vehicle from the driver seat only.
• To help prevent falls from the vehicle, remain seated with seat belt fastened and hold on to hand holds
at all times. Driver should keep both hands on the steering wheel when the vehicle is in motion.
• To help prevent the possibility of serious injury, keep entire body inside the vehicle.
• To help prevent overturning the vehicle, drive slowly in turns.
WARNING CONTINUED ON NEXT PAGE
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Driving Instructions
WARNING
• To help prevent overturning the vehicle, drive slowly straight up and down slopes. Avoid driving
the vehicle on slopes exceeding 20% incline.
• Avoid stopping a loaded vehicle on a hill. If a loaded vehicle must be stopped on a hill, avoid
sudden starts or rolling backwards and stopping suddenly. Failure to heed this warning could result
in overturning the vehicle.
• To help avoid possible injury to inattentive passengers and (or) damage to the vehicle, avoid sudden
starts, sudden stops, and abrupt turns.
• To help avoid the possibility of losing control of or overturning the vehicle, reduce speed for adverse
driving conditions such as wet grass or rough terrain.
• The vehicle should be driven in only specified areas by trained drivers.
• Do not drive while under the influence of alcohol, drugs, or medications.
• Use brakes to reduce speed when coasting downhill.
• Never attempt jumps.
• Keep away from drop-offs, steep slopes, and unstable surfaces.
• Avoid extremely hard braking in reverse.
No one should drive the vehicle without first being instructed in the proper operation and use of vehicle controls. An
experienced operator should accompany each first-time driver on a test drive before allowing the driver to operate
the vehicle alone.
To ensure safe operation of the vehicle, follow exactly and in order all of the following procedures. Read and
understand all instructions before driving the vehicle.
STARTING THE VEHICLE
1. Read safety warnings on the instrument panel and vehicle loading information located in the cargo bed.
2. Be sure load, if any, is secure.
3. Study and understand all controls.
4. Be sure all passengers are seated with their seat belts fastened and are holding on to hand holds. Driver should
have both hands on the steering wheel.
5. Make sure wheels are turned in desired direction and nothing is in your path.
6. Make sure the Forward/Reverse handle is in the NEUTRAL position.
7. Press and hold the brake pedal.
8. Start the vehicle.
8.1. To preheat glow plugs in cold weather, turn the key to the PREHEAT position and hold it there for 10-15
seconds. Turn the key to the START position and hold it there until the engine starts. If the engine does not
start after 10-15 seconds, turn the key to the OFF position and repeat the procedure. Once the engine
starts, release the key and it will return to the ON position. The engine will idle in neutral.
9. Release the park brake.
10. Keep the brake pedal engaged, and select direction of travel by placing the shift handle in the desired position
(Figure 7). The engine must be at idle before the shift handle is moved. A buzzer will sound as a warning when
the Forward/Reverse handle is in the REVERSE position.
11. Release the brake pedal completely, and then slowly press the accelerator pedal. As the accelerator pedal is
pressed, the vehicle will begin to move. Vehicle speed will increase as the accelerator is pressed until full speed is
reached. All-wheel drive will automatically drive the appropriate wheel(s) as required. See following WARNING.
Page 22
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Driving Instructions
WARNING
• Operator must control vehicle speed when going downhill.
• Never shift the vehicle out of the FORWARD position while going downhill. If you do, you will not be
able to shift into the REVERSE position or back into the FORWARD position until stopped.
• Press the brake pedal as necessary and press the accelerator pedal partially when descending a hill.
With the accelerator pedal partially pressed, the governor will cause the engine to assist the brakes in
controlling downhill speed.
ALL-WHEEL DRIVE (AWD) OPERATION
The Husqvarna HUV 5420 DXR features an all-wheel drive (AWD) system. The AWD system automatically directs
power to the wheel, or wheels, that have the most traction, providing optimum traction at all times. For example, if all
wheels except the rear passenger-side wheel lose traction, then power will be directed to the rear passenger-side
wheel. The all-wheel drive vehicle can adapt traction for a wide variety of driving surfaces and conditions. See
following WARNING.
WARNING
• When servicing the vehicle with part of the vehicle on jack stands, do not operate the engine with the
Forward/Reverse handle in either the FORWARD or REVERSE position. The all-wheel drive system will
engage any wheel(s), front or rear, with traction (Figure 3).
• The diameter of all tires on the vehicle must be equal; otherwise the all-wheel drive system will not
operate as intended and could result in severe personal injury or death. Never install tires of different
diameters on the vehicle.
Under most circumstances the driver will not need to do anything to engage the AWD system; however, the front
differential may become locked (rotate at the same speed regardless of the terrain) under certain conditions. If the
front differential becomes locked, drive slowly in reverse for at least 10 feet (3 meters), then brake gently. See
following WARNING.
WARNING
• Reduced steering control can occur if the front differential becomes locked. To help prevent this
condition, avoid extremely hard braking in reverse.
STOPPING THE VEHICLE
To stop the vehicle, release the accelerator pedal and press the brake pedal until the vehicle comes to a complete stop.
See following WARNING and CAUTION.
WARNING
• Driving through water may affect the brakes. After driving through water, check effectiveness of the
brakes by gently pressing the brake pedal. If the vehicle does not slow down at the normal rate,
continue to press the brake pedal until the brakes dry out and normal performance returns.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading and Unloading Cargo
CAUTION
• When stopped on a hill, use the brake pedal to hold your position. Do not use the accelerator pedal
to hold position.
PARKING AND LEAVING THE VEHICLE
1. After stopping the vehicle, firmly set the park brake. Make sure it is fully engaged. This will prevent the vehicle
from rolling.
2. Turn the key switch to the OFF position, remove the key, and place the Forward/Reverse handle in the NEUTRAL
position.
LOADING AND UNLOADING CARGO
WARNING
• Firmly engage park brake before loading vehicle.
• Do not allow riders in the cargo bed.
• Reduce vehicle load and speed when driving up or down slopes or on uneven terrain.
• Do not exceed rated vehicle capacity. Rated capacity is for level surfaces only.
• Overloading can affect vehicle handling or cause component failure, resulting in loss of control of
vehicle and possible severe personal injury or death.
• Do not load tailgate. The tailgate should be in the upright position and latched securely while the
vehicle is in motion.
• To help avoid shifting vehicle load and possibly overturning the vehicle, avoid sudden starts, sudden
stops and abrupt turns. Make sure cargo is well secured.
• Avoid top-heavy loads. The center of gravity of load should never exceed 15 inches (38 cm) above
the bottom of the cargo bed.
• The cargo’s center of gravity may affect handling, steering, and braking of the vehicle. When the
vehicle is loaded, reduce speed and drive slowly in turns.
• Unload cargo bed before raising vehicle with a lift, hoist, or jack.
• Avoid stopping on a hill when loaded. If you must stop on a hill, avoid sudden starts, or rolling
backwards and stopping suddenly. Failure to heed this warning may cause vehicle to overturn,
possibly resulting in severe personal injury.
• Reduce speed and avoid sudden stops when backing up. Failure to do so may cause the vehicle
to overturn or flip over backwards.
• Maximum cargo load must be reduced by the weight of optional equipment.
Center and secure cargo as far forward as possible in the cargo bed. Do not overload the vehicle. See Vehicle
Load Capacities on page 24 for vehicle capacities.
VEHICLE LOAD CAPACITIES
Maximum Occupant Capacity
The maximum occupant capacity is the maximum allowable weight for occupants (operator and passengers) to
operate the vehicle safely.
Page 24
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Load Capacities
Gross Trailer Weight
Gross trailer weight is the combination of the trailer weight and the trailer load weight.
Maximum Payload Capacity
The maximum payload capacity is the maximum amount of load that the vehicle can haul in the cargo bed and/or tow
in a trailer. The combined weight of bed load and gross trailer weight cannot exceed the vehicle’s stated maximum
payload capacity.
Vehicle Rated Capacity
The vehicle rated capacity is the maximum amount of weight the vehicle can carry, haul, and tow. This capacity
includes weight of occupants, bed load, and gross trailer weight.
Maximum Gross Vehicle Weight
The maximum gross vehicle weight is the combination of the vehicle weight and the maximum vehicle capacity. The
stated maximum gross vehicle weight must not be exceeded to maintain safe vehicle operation.
Maximum payload capacity must be reduced accordingly when any option or accessory is installed on the vehicle. See
following NOTE.
NOTE: A standard vehicle with a cab accessory that weighs 235 lb. (107 kg) must reduce its maximum payload
capacity by 235 lb. (107 kg).
Refer to Figure 13 for the following specifications.
Husqvarna HUV 5420 DXR
Husqvarna HUV 5420 DXR
Vehicle with High Capacity
Diesel Vehicles
Option
A: Maximum occupant capacity
400 lb. (181 kg)
400 lb. (181 kg)
B + C: Maximum payload capacity
706 lb. (323 kg)
150 lb. force (667 N)
1106 lb. (504 kg)
2756 lb. (1250 kg)
961 lb. (436 kg)
150 lb. force (667 N)
1361 lb. (617 kg)
3016 lb. (1368 kg)
D: Trailer tongue weight
A + B + C: Maximum vehicle capacity
A + B + C + Vehicle Weight: Maximum gross vehicle weight
197
Figure 13 Vehicle Load Capacity – Two-Passenger
Vehicles
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Towing with the Vehicle
TOWING WITH THE VEHICLE
WARNING
• Do not tow a vehicle or trailer on public streets or highways.
• Normal vehicle operating speed should be reduced when towing.
• Extreme caution should be used when towing.
• Do not allow riders in the vehicle or trailer being towed.
• Avoid sudden starts, sudden stops, and tight turns when towing.
• Avoid stopping on a hill when towing. If you must stop on a hill, avoid sudden starts, or rolling
backwards and stopping suddenly. Failure to heed this warning may cause vehicle to overturn,
possibly resulting in severe personal injury.
Towing another Husqvarna vehicle or a trailer can have adverse effects on vehicle handling. Be especially cautious
when towing other equipment with a Husqvarna vehicle. See Vehicle Load Capacities on page 24 for vehicle
capacities.
Parking the vehicle with a trailer on a hill should be avoided. If you must park on a hill, apply the brakes and have
someone chock the trailer tires. The brakes should be released to allow the chocks to absorb the trailer load. After the
trailer tires have been chocked, engage the park brake.
TRANSPORTING ON A TRAILER
WARNING
• Do not allow riders in the trailer being towed.
• Avoid sudden starts, sudden stops, and tight turns when towing.
• Avoid stopping on a hill when towing. If you must stop on a hill, avoid sudden starts, or rolling
backwards and stopping suddenly. Failure to heed this warning could cause the vehicle to overturn,
possibly resulting in severe personal injury.
• Reduce normal driving speed when transporting a vehicle on a trailer.
• For use on public roads, the trailer must meet all federal, state, and local requirements such as
taillights, brake lights, etc.
• Do not tow a Husqvarna vehicle behind a passenger vehicle or truck on a public road unless it is
on an approved trailer.
• The vehicle to be transported should be tied securely to the trailer, with the Forward/Reverse handle in
the NEUTRAL position, the key switch in the OFF position, and the park brake firmly engaged.
• Because of the added length of the trailer, use caution when making turns.
• Do not transport the vehicle on a trailer with a load in the vehicle cargo bed.
• Remove the vehicle windshield and secure seats before transporting on a trailer.
If the vehicle must be transported over long distances or on public highways, it should be transported on an approved
trailer that has an approved load rating of 2000 lb. (908 kg) per vehicle being transported. See following NOTE.
NOTE: A two-car trailer should be rated at 2 x 2000 lb. = 4000 lb. (2 x 908 kg = 1816 kg).
Page 26
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage
STORAGE
DANGER
• Do not attempt to drain fuel when the engine is hot or while it is running.
• Clean up any spilled fuel before operating the vehicle.
• Store fuel in an approved fuel container only. Store in a well-ventilated area away from sparks, open
flames, heaters, or heat sources.
• Keep fuel out of the reach of children.
• Do not siphon fuel from the vehicle.
WARNING
• Turn the key switch to the OFF position, remove the key, and leave the Forward/Reverse handle in
the NEUTRAL position during storage. This is to prevent unintentionally starting the vehicle or a
fire hazard.
• Do not attempt to charge frozen batteries or batteries with bulged cases. Discard the battery. Frozen
batteries can explode.
CAUTION
• Batteries in a low state of charge will freeze at low temperatures.
PREPARING THE VEHICLE FOR EXTENDED STORAGE
1. Unload the vehicle so that the tires are supporting only the weight of the vehicle.
2. Store the vehicle in a cool, dry place. This will minimize battery self-discharge. If the battery appears to be weak,
have it charged by a trained technician. Use an automotive-type 12-volt battery charger rated at 10 amps or
less. Check electrolyte level after charging and add distilled water if necessary. If the battery is dead, see
3. Make sure the key switch is in the OFF position and the Forward/Reverse handle is in the NEUTRAL position.
Chock the wheels.
4.1. Fill the fuel tank with fresh fuel.
4.2. Disconnect the fuel vent line from the fuel tank vent nipple (Figure 27).
4.3. Plug the fuel tank vent nipple so that it is air tight. Husqvarna recommends using a slip-on vinyl cap.
7. The battery should be clean and free of corrosion. Wash the battery top and terminals with a solution of baking
soda and water (1 cup (237 mL) baking soda per 1 gallon (3.8 L) of water). Rinse the solution off the battery. Do
not allow this solution to enter the battery. Be sure the terminals are tight. Let the terminals dry and then coat
them with Battery Terminal Protector Spray (P/N 603 00 00-03).
8. Adjust the tires to the recommended tire pressure. See Vehicle Specifications on page 48.
10. Thoroughly clean the front body, rear body, seats, cargo bed, engine compartment, and underside of vehicle.
11. Do not engage the park brake. Chock the wheels to prevent the vehicle from rolling.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
RETURNING THE STORED VEHICLE TO SERVICE
1. Make sure the key switch is in the OFF position and the Forward/Reverse handle is in the NEUTRAL position.
Chock the wheels.
2. Restore the fuel system to operation (Figure 27).
2.1. Remove the plug from the fuel tank vent.
2.2. Connect the vent tube to the fuel tank vent.
3. Connect battery. See Connecting the Battery – Diesel Vehicles on page 9. Coat terminals with Battery
Terminal Protector Spray (P/N 603 00 00-03).
4. Place the Forward/Reverse handle in the NEUTRAL position. Crank the engine until fuel is pumped into the
carburetor (gasoline vehicles) and the fuel lines (all vehicles) and the engine starts. Turn the engine off.
5. Perform the Pre-Operation and Daily Safety Checklist on page 20 and the Performance Inspection on page 20.
MAINTENANCE
To ensure trouble-free vehicle performance, follow an established preventive maintenance program. Regular and
consistent maintenance can prevent vehicle downtime and expensive repairs. Use the Pre-Operation and Daily Safety
Checklist on page 20, the Performance Inspection on page 20, and the following Periodic Service Schedule and
Periodic Lubrication Schedule to keep the vehicle in proper working condition.
Any vehicle not functioning correctly should not be used until it is properly repaired. This will prevent further damage to
the vehicle and help prevent injury to occupants resulting from unsafe conditions.
Contact your local Husqvarna dealer/distributor for repairs and semiannual and annual periodic service.
WARNING
• Only trained technicians should service or repair the vehicle. Anyone doing even simple repairs or
service should have knowledge and experience in electrical and mechanical repair. The appropriate
instructions must be used when performing maintenance, service, or accessory installation.
• If any problems are found during scheduled inspection or service, do not operate vehicle until repairs
are made. Failure to make necessary repairs could result in fire, property damage, severe personal
injury, or death.
• Do not wear loose clothing or jewelry such as rings, watches, chains, etc., when servicing the vehicle.
• Turn key switch to the OFF position, remove the key, place the Forward/Reverse handle in the
NEUTRAL position and chock the wheels prior to servicing.
• Moving parts: Do not attempt to service vehicle while engine is running.
• Hot! Do not attempt to service hot engine or exhaust system. Failure to heed this warning could
result in severe burns.
• For vehicles with cargo beds, remove all cargo before raising the bed or servicing the vehicle. If the
vehicle is equipped with a prop rod, ensure that it is securely engaged while bed is raised. Do not
close bed until all persons are clear of cargo bed area. Keep hands clear of all crush areas. Do not
drop cargo bed; lower gently and keep entire body clear. Failure to heed this warning could result in
severe personal injury or death.
• Do not work on vehicle powertrain or under cargo bed when it is loaded.
• To avoid unintentionally starting the vehicle, disconnect battery. See Disconnecting the Battery –
WARNING CONTINUED ON NEXT PAGE
Page 28
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Service Schedule
WARNING
• If wires are removed or replaced make sure wiring and wire harness are properly routed and secured.
Failure to properly route and secure wiring could result in vehicle malfunction, property damage,
personal injury, or death.
• Lift only one end of the vehicle at a time. Use a suitable lifting device (chain hoist or hydraulic floor
jack) with 1000 lb. (454 kg) minimum lifting capacity. Do not use lifting device to hold vehicle in raised
position. Use approved jack stands of proper weight capacity to support the vehicle and chock
the wheels that remain on the floor.
• When servicing the vehicle with part of the vehicle on jack stands, do not operate the engine with the
Forward/Reverse handle in either the FORWARD or REVERSE position. The all-wheel drive system will
engage any wheel(s), front or rear, with traction (Figure 3).
PERIODIC SERVICE SCHEDULE
WARNING
• Service, repairs, and adjustments must be made per instructions in the appropriate maintenance
and service manual.
NOTE: If the vehicle is constantly subjected to heavy use or severe operating conditions, these preventive
maintenance procedures should be performed more often than recommended in the Periodic Service and
Lubrication Schedules.
Both the Periodic Service Schedule and the Periodic Lubrication Schedule must be followed to keep vehicle in
optimum operating condition.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Service Schedule
PERIODIC SERVICE SCHEDULE
REGULAR INTERVAL
SERVICE
Checklist on page 20.
Pre-Operation and Daily Safety Checklist
Performance Inspection
Check engine oil level; add if necessary. See
Engine
Check engine coolant; add if necessary. See
Daily service by owner or trained technician
Drain water from fuel filter. See Draining
Fuel filters
Brakes
Check brake fluid; add if necessary. Check
brake pedal for proper operation. See
Check engine circulating air passage; visually
inspect unshrouded area around engine
exhaust for grass and debris and clean if
necessary. Check for grass and debris around
the radiator.
Engine
Check air pressure and adjust if necessary.
Tires
Monthly service by owner or trained
technician
See Vehicle Specifications on page 48.
Check lubricant levels. Add if necessary.
See Lubrication Level Check for Front
Differential, Transmission, and Rear
Differential on page 38.
Transmission and differentials
Wash engine compartment and underside of
vehicle. Do not wash engine when hot.
General vehicle
Battery
Clean terminals and wash dirt from casing;
check electrolyte level. Add distilled water if
necessary. See page 44 .
Check and adjust if necessary. See Steering
and Front Suspension Section in the
appropriate maintenance and service
manual.
Front wheel alignment and toe-in
Electrical wiring and connections
Check for tightness and damages
Semiannual service by trained technician
only (or every 50 hours of operation,
whichever comes first)
Inspect master cylinder, brake lines, and hoses
for damage or leakage.
Check park brake cables for damage; replace
if necessary.
Check brake pads and discs; replace if
necessary. For brake wear-in procedure,
See also Brake System Section in the
appropriate maintenance and service
manual.
Brake system
Page 30
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Service Schedule
PERIODIC SERVICE SCHEDULE
REGULAR INTERVAL
SERVICE
Check for leaks around gaskets, fill plugs, etc.
Check the v-belt for proper tension or damage.
Adjust or replace if necessary.
Engine
Change engine coolant. See Radiator and
Cooling System Section in the maintenance
and service manual.
Check clamps for tightness; check hose for
cracks.
Annual service by trained technician only
(or every 100 hours of operation, whichever
comes first)
Radiator
Replace air filter element. See Air Intake
System on page 40.
Engine air intake system
Check clamps for tightness; check hose for
cracks.
Check for loose hardware and tighten if
necessary.
General vehicle
Fuel filters
Replace. Dispose of used filters properly.
WARNING
• If any problems are found during scheduled inspection or service, do not operate vehicle until repairs
are made. Failure to make necessary repairs could result in fire, property damage, severe personal
injury, or death.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Lubrication Schedule
PERIODIC LUBRICATION SCHEDULE
PERIODIC LUBRICATION SCHEDULE
LUBRICATION
POINTS
REGULAR INTERVAL
SERVICE
RECOMMENDED LUBRICANT
First change 50 hours –
additional change for both
every 100 hours of operation
or annually, whichever comes
first.
1
Change engine oil and oil filter
on page 37.
Monthly by owner or trained
technician
2
Driveshaft
Chassis Lube (EP NLGI Grade 2)
Chassis Lube (EP NLGI Grade 2)
Semiannually by owner or
trained technician (or every 50
hours of operation, whichever
comes first)
Rear suspension (2 fittings)
First change 50 hours –
additional change every 100
hours of operation or annually,
whichever comes first
5 oz. (150 mL) Mobil 424, Exxon Hydraul
560, or Esso Hydraul 56 lubricant
Change front differential lubricant
20 oz. (600 mL) Mobil 424, Exxon Hydraul
560, or Esso Hydraul 56 lubricant
First change 50 hours –
additional change every 300
hours of operation or annually,
whichever comes first
Change rear differential lubricant
Change transmission lubricant
20 oz. (600 mL) Mobil 424, Exxon Hydraul
560, or Esso Hydraul 56 lubricant
200
Figure 14
Lubrication Points
Page 32
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Brake Fluid Reservoir
BRAKE FLUID RESERVOIR
1. Full Level 2. Safe Level 3. Low Level
202
201
Figure 15 Brake Fluid and Coolant Access
Figure 16 Brake Fluid Reservoir
The brake fluid reservoir (1) is located under the hood (Figure 15). Raise the hood to check the brake fluid level.
During the brake fluid level inspection, also inspect the following:
• The presence of brake fluid on the exterior surface of the master cylinder indicates a leak.
• The brake fluid reservoir diaphragm (located in the cap) should not have holes or other damage.
BRAKE FLUID
Brake fluid level should be within 1/4-inch (6 mm) from the top of the reservoir (Figure 16). Also, brake fluid should be
clean with no residue in the bottom of the reservoir or other evidence of contamination.
CAUTION
• Use only DOT 5 (silicone) brake fluid. Use of any other type brake fluid is not recommended.
ENGINE OIL
Even though the low oil warning light on the instrument panel should illuminate if the oil level becomes low, the
engine oil level should be checked daily. The vehicle should be on a level surface when the oil is checked. Do not
overfill the engine with oil.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Oil
ENGINE OIL LEVEL CHECK
1. Remove the oil level dipstick from the oil filler tube and wipe oil from the dipstick (Figure 17). See following
CAUTION.
CAUTION
• Do not remove dipstick while engine is running.
2. Check oil level by fully inserting the dipstick into the tube and immediately removing it.
3. If the oil level is at or below the low level mark on the dipstick gauge, add oil to the engine until the level is
between low and full levels (safe level). See following CAUTION.
CAUTION
• Do not exceed recommended oil capacity. Doing so will decrease engine performance or result in
damage to the engine.
1. Full Level 2. Safe Level 3. Low Level
204
Figure 17 Engine Oil Level Check
ENGINE OIL AND FILTER CHANGE
Engine oil and oil filter should be changed after the first 50 hours of operation (diesel). After that, they should be
changed every 100 hours of operation or annually, whichever comes first.
Engine Oil Draining
1. Turn the key switch to the OFF position and remove the key. Place the Forward/Reverse handle in the NEUTRAL
position. Chock the front wheels.
3. Remove the oil filler cap to allow the oil to drain properly.
4. Position a pan designed for oil changes under the drain plug (Figure 18).
Page 34
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Oil
5. From the underside of the vehicle, use a socket or wrench to remove the drain plug (1). Turn the plug
counterclockwise and drain the engine oil into the pan. See following WARNING.
WARNING
• Do not attempt to change engine oil when the engine is hot or even warm. Hot engine oil can cause
skin burns.
• Wear safety glasses or approved eye protection when servicing the vehicle. Wear rubber gloves when
handling oil drain plug, oil filter, and oil drain pan.
6. Clean the oil drain plug threads with solvent to remove oil and oil residue. Make sure that the compression
washer remains on the drain plug. Inspect the compression washer and replace if necessary.
7. Use a socket or wrench to replace the oil drain plug (1) (Figure 18). Turn the plug clockwise and tighten to
31 ft-lb (42 N·m).
208
Figure 18 Engine Oil Drain Plug and Oil Filter – Diesel
Vehicles
Engine Oil Filter Change
2. Place the oil drain pan under the engine oil filter (2) (Figure 18).
3. Remove the engine oil filter. Turn it counterclockwise and drain the residual oil in the filter port and filter into
the oil drain pan. See following NOTE.
NOTE: An oil drip guard (1) can be used to prevent excess oil from dripping onto the engine base plate (Figure 19).
Use an empty quart (one liter) container and cut the bottom off at an angle, then slide the open area of the
container up and under the oil filter (2) before removal. Position the port of the plastic container so oil will be
directed into the oil pan (3). A drip guard can be made by folding a piece of cardboard, thin metal, or plastic
under the oil filter, forming a channel to direct the filter port oil into the drain pan.
Dispose of used oil according to the environmental laws and regulations for your area.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Oil
26
27
Figure 19 Remove Engine Oil Filter
Figure 20 Coat Rubber Seal
4. Use a clean, lint-free rag to wipe the oil filter port flange surface clean where the oil filter gasket seats.
5. To help seal the new oil filter to the oil port flange, apply a light coat of white lithium NLGI Number 2 grease (Dow
Corning® BR2-Plus or equivalent) or new engine oil to the rubber seal around the outside surface of the filter
before attaching it to the oil filter port (Figure 20). Install the new oil filter (P/N 603 00 00-41) onto the engine oil
filter port. See following NOTE.
NOTE: Use only Husqvarna oil filters designed for your engine.
6. Tighten the oil filter by hand 2/3 turn after gasket contact. Do not use a band wrench or channel lock pliers.
212
Figure 21 Add Engine Oil
Page 36
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Oil
Engine Oil Filling
1. Add engine oil; use a funnel or pour spout to direct the oil into the opening (Figure 21). With filter change, the
engine requires 3 qt. (2.8 L) of oil. Refer to oil viscosity guidelines for selection of oil grade (Figure 22). See
following CAUTION.
CAUTION
• Do not exceed recommended oil capacity. Doing so will decrease engine performance or result in
damage to the engine.
3. With the Forward/Reverse handle in the NEUTRAL position, start and run the engine for a few minutes. Observe
both the drain plug and the oil filter from under the vehicle and watch for oil leaks. If a leak is detected, check
the tightness of the oil filter and drain plug. Tighten, repair, and/or replace components as necessary. See
following NOTE.
NOTE: Wait five minutes after turning off the engine before removing the dipstick.
4. Remove the dipstick and check the engine oil as a final step. Replace the dipstick.
OIL VISCOSITY
Choose the viscosity according to the temperature as shown in the appropriate oil viscosity chart (Figure 22). See
following NOTE.
NOTE: Use engine oil with API classification CF for diesel engines.
Using multi-grade oils (5W-20, 10W-30, and 10W-40) will increase oil consumption. If multi-grade oil is used, check the
oil level more frequently.
214
Figure 22 Oil Viscosity Chart – Diesel Vehicles
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Gearcase Lubrication
GEARCASE LUBRICATION
NOTE: Dispose of used oil according to the environmental laws and regulations for your area.
LUBRICATION LEVEL CHECK FOR FRONT DIFFERENTIAL, TRANSMISSION, AND REAR
DIFFERENTIAL
Each gearcase component is equipped with two oil port plugs (1 and 2) (Figure 23, Figure 24, and Figure 25). When
the vehicle is on a level surface, use the level indicator hole (upper plug) (1) as a lubricant level indicator. Lubricant
level should be even with the bottom of level indicator hole (1).
LUBRICATION CHANGE FOR FRONT DIFFERENTIAL, TRANSMISSION, AND REAR
DIFFERENTIAL
Use the lower plug (2) for drainage (Figure 23, Figure 24, or Figure 25). Remove both plugs to allow the lubricant to
drain faster. See preceding NOTE.
Front differential:
Clean and install the drain plug (2) and washer before filling the front differential with new lubricant (Figure 23). Tighten
the drain plug to 108 in-lb (12 N·m). Use a funnel when filling the front differential through the lubricant level indicator
hole (1). See Periodic Lubrication Schedule on page 32. Tighten the level indicator plug to 120 in-lb (14 N·m).
215
216
Figure 23 Front Differential Lubrication Level
Figure 24 Transmission Lubrication Level
Transmission:
Clean and install the drain plug (2) before filling the transmission with new lubricant (Figure 24). Tighten the drain
plug to 96 in-lb (11 N·m). Remove the fill plug from the top of the transmission case and use a funnel to fill the
transmission with lubricant. See Periodic Lubrication Schedule on page 32. Apply Loctite 567 to the threads of
the fill plug and tighten to 21 ft-lb (28 N·m).
Page 38
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Coolant
Check the level of lubricant at the level indicator plug (1). Apply Loctite 567 to the threads of the level indicator plug
and tighten to 21 ft-lb (28 N·m).
Rear differential:
Clean and install the drain plug (2) and washer before filling the rear differential with new lubricant (Figure 25). Tighten
the drain plug to 96 in-lb (10.8 N·m). Use a funnel to fill the differential through the lubricant level indicator hole
(1). See Periodic Lubrication Schedule on page 32. Apply Loctite 567 to the threads of the level indicator plug
and tighten to 21 ft-lb (28 N·m).
217
Figure 25 Rear Differential Lubrication Level
ENGINE COOLANT
ENGINE COOLANT LEVEL CHECK
The coolant reserve tank (2) is located under the hood on the passenger side (Figure 15). Raise the hood to check
the coolant level before every operation.
1. Check the coolant level of the reserve tank (2). If the coolant is at or below the LOW mark, add pre-mixed
coolant until the level reaches the FULL mark. If a leak is detected, have it checked by a trained technician.
See following WARNING.
WARNING
• Hot! Coolant reserve tank is pressurized. Do not remove cap when engine is hot.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Air Intake System
AIR INTAKE SYSTEM
CAUTION
• Do not drill into the driver-side frame. Failure to heed this caution could damage the engine by
allowing excessive contamination to enter the air intake system.
AIR FILTER REPLACEMENT
The air filter should be inspected periodically and replaced when necessary. Filter changes should not exceed the
recommended interval. See Periodic Service Schedule on page 29. More frequent service may be required in
extremely dirty operating environments. In the event of a loss of power, sluggish acceleration, or a roughly running
engine, service the air filter immediately.
Air Filter Removal
1. Raise the cargo bed, and locate the air filter canister.
2. Release both canister tab locks (Figure 26).
3. Pull the canister cap away from the canister.
4. Remove the air filter cartridge (1). See following NOTE.
NOTE: The air filter cartridge is specifically designed for this engine. It only fits into the canister one way. Use only the
Husqvarna part (P/N 603 00 00-10) designed for this engine.
218
Figure 26 Air Filter Cartridge
Air Filter Installation
1. Push the new air filter cartridge onto the nozzle inside the canister.
2. Place the canister cap, marked TOP, on the top center of the canister.
3. Secure the canister cap with both tab locks.
Page 40
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Fueling Instructions
FUELING INSTRUCTIONS
DANGER
• Turn the key switch to the OFF position before fueling.
• Do not pour fuel into the fuel tank when the engine is hot or while it is running.
• To avoid electric arc caused by static electricity, the fuel storage/pumping device must be grounded. If
the pump is not grounded, the vehicle must be grounded to the pump before and during the fueling
operation.
• To avoid the possibility of fire, clean up any spilled fuel before operating the vehicle.
1. Remove the fuel cap and fill the tank with fuel. See preceding DANGER and following NOTE.
NOTE: Use only diesel fuel grade no. 2 with a cetane rating of 45 or higher.
2. Replace the fuel cap. Ensure that the cap is tightened securely.
3. Clean any spilled fuel from the cap or around the fuel cap area.
220
Figure 27 Fuel Tank
BIODIESEL FUEL
Biodiesel has unique qualities that should be considered before it is used in the Kubota D722 diesel engine. During
cold weather, plugged fuel lines, plugged fuel systems, hard starting, and other unknown failures can result from use
of this fuel.
Biodiesel is an excellent medium for microbial growth and contamination. Microbial contamination can cause corrosion
of the fuel system and prematurely plugged fuel filters. See following NOTE.
NOTE: Use of biodiesel may result in premature failure of fuel system components. Kubota has documented problems
such as plugged fuel filters and deteriorated fuel lines during testing of biodiesel.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Fueling Instructions
Biodiesel can damage painted surfaces. Be sure to remove all spilled fuel immediately to help prevent damage to
painted surfaces.
If biodiesel will be used in the Kubota D722 engine, be sure that it meets the following requirements:
• The fuel blend should contain no more than 5% biodiesel by volume.
• The petroleum portion of the fuel blend must meet ASTM standard D975 and the biodiesel portion of the fuel
blend must meet ASTM standard D6751.
• For Europe, the fuel blend must meet the EN590 standard. See following CAUTION.
CAUTION
• Never use any fuel that does not meet specifications or fuel in which the contents cannot be identified.
Using blends higher than 5% biodiesel content can affect engine life and cause deterioration of hoses,
tube lines, injectors, injector pump and seals.
• For more information on these fuel standards, please contact your nearest Kubota dealer.
If biodiesel is used, be sure to apply the following guidelines:
• Ensure the fuel tank is as full as possible at all times to prevent moisture from collecting.
• Ensure that the fuel tank cap is securely tightened to prevent water from entering the fuel tank.
• Drain all water from the fuel filter daily before operating vehicle. See Draining Water from Fuel Filter.
• Check the engine oil level daily before the engine is started. See Engine Oil Level Check on page 34.
• Before vehicle storage, run the engine with conventional diesel fuel for at least 30 minutes to flush the biodiesel
NOTE: Biodiesel does not have long-term stability and must not be left in engines longer than three months. This fuel
type attracts moisture and may contain higher water content than conventional diesel fuel.
Fuel system maintenance, cleaning, and fuel line replacement are required more frequently for engines that are
operated with biodiesel.
DRAINING WATER FROM FUEL FILTER
Water should be drained from the fuel filter daily. The fuel filter is mounted on a plate by the lower seat support
panel (Figure 28).
1. Position a pan under the fuel filter.
2. Lift the passenger-side seat.
3. Locate the valve (1) on the underside of the filter. Turn the valve clockwise until water begins to stream from
the filter.
4. Drain the water until it changes color (to fuel). See following WARNING.
WARNING
• Clean up spilled fuel. Keep sparks and flames away from the vehicle and service area. Failure to heed
this warning could result in an explosion or fire, resulting in severe personal injury or death.
5. Close the valve by rotating it counterclockwise until the valve is firmly sealed.
6. To resupply the filter with fuel, turn the key switch to the ON position for 10 seconds. See following NOTE.
NOTE: Dispose of water according to the environmental laws and regulations for your area.
Page 42
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery
221
Figure 28 Fuel Filter
BATTERY
DANGER
• Battery – Explosive gases! Do not smoke. Keep sparks and flames away from the vehicle and service
area. Ventilate when charging or operating vehicle in an enclosed area. Wear a full face shield and
rubber gloves when working on or near batteries.
• Battery – Poison! Contains acid! Causes severe burns. Avoid contact with skin, eyes, or clothing.
Antidotes:
– External: Flush with water. Call a physician immediately.
– Internal: Drink large quantities of milk or water followed with milk of magnesia or vegetable
oil. Call a physician immediately.
– Eyes: Flush with water for 15 minutes. Call a physician immediately.
• Tools, wires, and metal objects can cause sparks when shorted across a battery.
WARNING
• Wear safety glasses or approved eye protection when servicing the vehicle.
• Follow all instructions carefully when working with batteries.
WARNING CONTINUED ON NEXT PAGE
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery
WARNING
• When jumping from a booster battery make final (negative) connection at engine frame.
• Do not jump start or charge a frozen or damaged battery. Unplug charger before connecting or
disconnecting cables to the battery. Never lean over battery while boosting, testing, or charging.
The battery in a Husqvarna vehicle is a 12-volt, low-maintenance battery that requires infrequent checks (Figure
29). Electrolyte level should be checked semiannually.
1. Level Indicator 2. Cap 3. Plates
Electrolyte level at least 1/2 inch (13 MM) above plates or to level
indicator.
222
22
Figure 29 Battery
Figure 30 Battery Electrolyte Level
1. Turn the key switch to the OFF position and remove the key. Place the Forward/Reverse handle in the NEUTRAL
position. Chock the wheels.
on page 8.
2.1. Remove the driver-side seat.
4. Use a flat-blade screwdriver, and carefully remove the battery cell caps from the battery. See following
WARNING.
WARNING
• Wear safety glasses or approved eye protection when servicing the vehicle. Wear a full face shield and
rubber gloves when working on or near batteries.
5. Carefully check the electrolyte level and add distilled water if necessary. Do not fill the battery cells above
the designated fill line. Replace battery cell caps.
6. Clean both battery terminals with a solution of baking soda and water (1 cup (237 mL) baking soda per 1 gallon
(3.8 L) of water). Rinse thoroughly. Do not allow this solution to enter the battery. Be sure terminals are tight.
Let the terminals dry and then spray them with Battery Terminal Protector Spray (P/N 603 00 00-03). See
Page 44
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Using A Booster Battery (Jump Starting)
WARNING
• If battery wire terminals are damaged or corroded, replace or clean them as necessary. Failure to do
so may cause them to overheat during operation and could result in a fire, property damage, or
personal injury.
Be sure the battery hold-down clamp is properly tightened. Tighten to 108 in-lb (12.2 N·m). A loose clamp may allow
the battery to become damaged from vibration or jarring.
If battery appears weak, have it charged by a trained technician. The battery should never be left discharged any
longer than absolutely necessary (do not leave discharged overnight).
USING A BOOSTER BATTERY (JUMP STARTING)
WARNING
• Wear safety glasses or approved eye protection when servicing the vehicle. Wear a full face shield and
rubber gloves when working on or near batteries.
• When jumping from a booster battery make final connection (negative) at engine frame.
• Do not jump start or charge a frozen or damaged battery. Unplug charger before connecting or
disconnecting cables to the battery. Never lean over battery while boosting, testing, or charging.
If it is necessary to use a booster battery to start the engine, BE CAREFUL!
1. Turn the key switch to the OFF position. Place the Forward/Reverse handle in the NEUTRAL position, engage
the park brake, and chock the wheels.
2. Ensure the booster battery is 12-volt.
3. Access the engine compartment by raising the cargo bed. See WARNING “For vehicles with cargo beds...” in
4. Locate the vehicle battery on the driver’s side of the vehicle under the cargo bed (Figure 31).
5. Connect the end of the first cable (1) to the positive (+) terminal of the booster battery. Connect the other
end of the same cable (2) to the positive terminal of the vehicle battery. See DANGER Battery – Explosive
6. Connect the end of the second cable (3) to the negative (–) terminal of the booster battery. Connect the other end
of the same cable (4) to the battery frame ground.
7. Sit in the driver’s seat and start the engine.
8. After the engine has started, remove the frame ground (–) cable (4) first. Remove the cable from the positive
terminal (2). Then remove the cables from the booster battery. See following CAUTION.
CAUTION
• The alternator can be damaged if the following actions occur:
– Engine is operated with battery cables disconnected.
– Booster cables are connected wrong.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Vehicle
223
Figure 31 Jump Starting
CLEANING THE VEHICLE
Each vehicle is equipped with hand-washable front and rear bodies. The vehicle has a powder-coated steel cargo bed
(or optional aluminum flat bed). Use commercial automotive cleaning solutions with a sponge or soft cloth for normal
cleaning. A garden hose at normal residential water pressure is adequate. To remove oxidation or discoloration from
aluminum, use a commercially available aluminum cleaner paste and fine grade (No. 00) steel wool.
The manufacturer does not recommend any type of pressure washing or steam cleaning. Such a process will
expose electrical components to moisture. Moisture entering electrical components can result in water damage and
subsequent component failure.
Use non-abrasive wax products. Battery acid, fertilizers, tars, asphalt, creosote, paint, or chewing gum should be
removed immediately to prevent possible stains.
The seats of the vehicle will last longer with proper cleaning. Use a solution of 10% liquid soap and warm water applied
with a soft cloth. For imbedded dirt, a soft bristle brush may be used. For heavy soiling, difficult stains, or scratches,
blemishes, or other body damage, see the appropriate maintenance and service manual. See following NOTE.
NOTE: Dispose of waste water properly.
Page 46
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
ACCESSORIES
There is a complete line of accessory equipment available from our dealers/distributors.
Care should be taken that these accessories are properly installed by trained technicians and that they are used in the
manner for which they were designed. See following WARNING and CAUTION.
WARNING
• Custom cab assemblies, canopy tops, weatherproof enclosures, and windshields will not protect
occupants from flying objects.
• If the vehicle is equipped with an electric-powered bed lift, remove the bed before servicing the
bed lift system.
CAUTION
• Do not drill into the driver-side frame. Failure to heed this caution could damage the engine by
allowing excessive contamination to enter the air intake system.
MUD TIRE OPTION
All-wheel drive (AWD) vehicles are equipped with mud tires are intended only for off-road operation; they are not
designed for use on paved surfaces such as asphalt and concrete. Frequent driving on paved surfaces will significantly
decrease the life of the mud tires. Vehicle performance will also be reduced when driving on paved surfaces. See
following WARNING.
WARNING
• To avoid the risk of rollover when operating a vehicle equipped with mud tires on a paved surface:
reduce speed, use extreme caution, and drive slowly in turns.
• The diameter of all tires on the vehicle must be equal; otherwise the all-wheel drive system will not
operate as intended and could result in severe personal injury or death. Never install tires of different
diameters on the vehicle.
Husqvarna tires are made specifically for the AWD vehicle; therefore, Husqvarna recommends that only tires
purchased from Husqvarna be used on your AWD vehicle.
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Specifications
VEHICLE SPECIFICATIONS
SPECIFICATIONS
POWER SOURCE
DIESEL VEHICLES
Engine: 4-cycle OHV, 719 cc 15Kw (20.0 maximum HP) @3600 RPM (per SAE J
•
1940/1349) Three-cylinder, liquid-cooled, with pressure lubrication system
Fuel system: Mechanical injection, fuel water separator, fuel filters, and electric fuel pump
Governor: internal to engine, mechanical, centrifugal ball
Ignition: Compression
•
•
•
•
Transmission: Forward and reverse with neutral (4.98:1 forward, 7.79:1 reverse)
Electrical system: 12 volt, 500 cca at -17.8 °C (0 °F), 650 at 0 °C (32 °F). 105-minute
•
•
reserve capacity and 35-amp charging capacity
Torque converter: Automatic, variable-speed, dry type
STEERING/SUSPENSION/BRAKES
Steering: Self-adjusting rack and pinion, Ackerman
Suspension:
•
•
Front: Independent double A-arms with coil-over shock absorbers
Rear: Swing arms with coil-over shock absorbers
Brakes: Hydraulic brake system – brake pads and discs on each wheel with separate
•
foot-operated park brake
BODY/CHASSIS
Frame/Chassis: Box tube aluminum
Side and rear body: All aluminum
Cargo bed: Powder-coated steel or aluminum
Front body: ABS/DR acrylic cap
Tires: All Terrain: 25 x 10.5 – 12 front, and rear; tubeless, 4-ply rated load range
Mud: 25 x 11.0 – 12 front and rear; tubeless, 4-ply rated load range
DIMENSIONS/CAPACITIES
•
•
•
•
•
Overall length (box bed configuration)
Overall width
124.6 in. (317 cm)
58.9 in. (149.7 cm)
66.1 in. (167.8 cm)
without mirror
with mirror
Overall height (with ROPS)
82.2 in. (208.9 cm)
81.7 in. (207.5 cm)
Wheelbase
Ground clearance:
under differential
Front wheel tread
Rear wheel tread
Forward speed
Governed RPM
8.2 in. (20.8 cm)
48.2 in. (122.5 cm)
48.2 in. (122.5 cm)
25 mph (40 km/h)
3825
Page 48
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Specifications
SPECIFICATIONS
DIESEL VEHICLES
Standard option:
706 lb. (320 kg)
1106 lb. (544 kg)
High capacity option:
Maximum payload capacity (level surface only)
961 lb. (436 kg)
Vehicle rated capacity (payload, driver, and passenger; level surface only)
NOISE AND VIBRATION SPECIFICATIONS
1361 lb. (657.6 kg)
Drive-by noise level to operator per BS EN 1726-1:1999
Drive-by noise level to environment
82 dBA
79.9 dBA
1.0 m/s2
Vibration at driver’s seat per BS EN 13059:2002 +A1:2008
CLIMATIC EXTREMES
Operating temperature range
-20 to 40 °C (-4 to 104 °F)
LIQUID CAPACITIES
Engine crankcase with filter: SAE 10W-30, API classification CF
Front differential: Mobil 424, Exxon Hydraul 560, or Esso Hydraul 56 lubricant
Rear differential: Mobil 424, Exxon Hydraul 560, or Esso Hydraul 56 lubricant
Transmission: Mobil 424, Exxon Hydraul 560, or Esso Hydraul 56 lubricant
Engine coolant: mixture of 55% propylene glycol and 45% water
Brake fluid: DOT 5 (silicone) brake fluid
3 qt. (2.8 L)
5 oz. (150 mL)
20 oz. (600 mL)
20 oz. (600 mL)
2 gal. (7.8 L)
8 oz. (240 ml)
6.5 gallons (24.6 L)
Fuel tank: diesel grade no.2 with cetane rating of 45 or higher
TIRE PRESSURE
All-terrain tread and mud tires
20 - 22 psi (1.38 - 1.52 Bars)
HIGH CAPACITY
VEHICLE MASS
STANDARD OPTION
OPTION
Front axle:
862 lb. (391 kg)
1023 lb. (464 kg)
1885 lb. (855 kg)
939 lb. (426 kg)
1111 lb. (504 kg)
2050 lb. (930 kg)
1016 lb. (461 kg)
1199 lb. (544 kg)
2216 lb. (1005 kg)
864 lb. (392 kg)
1025 lb. (465 kg)
1889 lb. (857 kg)
941 lb. (427 kg)
1113 lb. (505 kg)
2055 lb. (932 kg)
1019 lb. (462 kg)
1202 lb. (545 kg)
2220 lb. (1007 kg)
Unladen vehicle mass (full tank)
Rear axle:
Total:
Front axle:
Rear axle:
Total:
Running order weight with driver (unladen vehicle mass plus driver)
Front axle:
Rear axle:
Total:
Running order weight with driver and passenger (unladen vehicle mass
plus driver and passenger)
Gross vehicle weight limit (GVWR Max): fully loaded vehicle, accessories
2756 lb. (1250 kg)
3016 lb. (1368 kg)
included
HUV 5420 DXR Homologated Diesel Vehicle for Europe Owner’s Manual
Page 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
BC55284
Publication Part Number 103472543
Edition Code 0409D0609C
This manual is valid for vehicles built during the 2009 model year.
It is also valid for vehicles with build codes between 54699 and the one
indicated at the top of this page.
Download from Www.Somanuals.com. All Manuals Search And Download.
|