Hunter Fan Outdoor Ceiling Fan 42676 01 User Manual

For Your Records and  
Warranty Assistance  
Type 2 Models  
For reference, also attach your receipt or a copy  
of your receipt to the manual.  
Owners Guide and Installation Manual  
__________________________________________  
Model Name  
__________________________________________  
Model No.  
__________________________________________  
Date Purchased  
__________________________________________  
Where Purchased  
Form# 42676-01  
20090513  
©2009 Hunter Fan Co.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installer’s Choice and Optional Accessories  
Understanding Mounting and Installer’s Choice®  
Support Brace  
Hunter’s patented 3-position mounting system provides you maximum  
installation flexibility and ease. You can install your Hunter fan in one  
of three ways, depending on ceiling height and your preference: Low  
Profile, Standard, or Angled mounting. e steps in this manual include  
instructions for all three Installer’s Choice mounting methods.  
Ceiling  
Outlet Box  
Standard  
Mounting  
Style  
Considering Optional Accessories  
Consider using Hunter’s optional accessories, including a wall-mounted  
or remote speed control. To install and use the accessories, follow  
the instructions included with each product. For quiet and optimum  
performance of your Hunter fan, use only Hunter speed controls.  
Standard Mounting hangs from the  
ceiling by a downrod (included).  
For ceilings higher than 8 feet, you can purchase  
Hunter extension downrods. All Hunter fans use  
sturdy 3/4” diameter pipe to assure stability and  
wobble-free performance.  
Support Brace  
Ceiling  
Outlet Box  
Support Brace  
8
CAUTION: To  
reduce the risk of  
personal injury, attach  
the fan directly to the  
12  
Angled  
Mounting  
Style  
support structure of  
the building according  
to these instructions,  
and use only the  
Low Profile  
Mounting  
Style  
Ceiling  
Outlet Box  
hardware supplied.  
Low Profile Mounting fits close to the  
ceiling, recommended for ceilings less  
than 8 feet high  
Angled Mounting recommended for a  
vaulted or angled ceiling  
3
42676-01 • 05/13/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 • Getting Ready  
To install a ceiling fan, be sure you can do the following:  
• Locate the ceiling joist or other suitable support in ceiling.  
• Drill holes for and install wood screws.  
• Identify and connect electrical wires.  
• Lift 40 pounds.  
If you need help installing the fan, your Hunter fan dealer can direct  
you to a licensed installer or electrician.  
Gathering the Tools  
You will need the following tools for installing the fan:  
• Electric drill with 9/64” bit  
• Standard screwdriver (magnetic tip recommended)  
• Phillips-head screwdriver (magnetic tip recommended)  
• Wrench or pliers  
• Ladder (height dependent upon installation site)  
Installing Multiple Fans?  
If you are installing more than  
one fan, keep the fan blades and  
blade irons (if applicable) in sets,  
as they were shipped.  
Checking Your Fan Parts  
Carefully unpack your fan to avoid damage to the fan parts. Refer to  
the included Parts Guide. Check for any shipping damage to the motor  
or fan blades. If any parts are missing or damaged, contact your Hunter  
dealer or call Hunter Technical Support Department at 888-830-1326  
(In Canda, call 866-268-1936).  
Preparing the Fan Site  
Before you begin installing the fan, follow all the instructions in  
the pullout sheet called “Preparing the Fan Site.” Proper ceiling fan  
location and attachment to the building structure are essential for  
safety, reliable operation, maximum efficiency, and energy savings.  
4
42676-01 • 05/13/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 • Installing the Ceiling Plate  
CAUTION: To avoid possible electrical shock, before installing your fan,  
Toward  
Ceiling Peak  
disconnect the power by turning off the circuit breakers to the outlet box  
and associated wall switch location. If you cannot lock the circuit breakers  
in the off position, securely fasten a prominent warning device, such as a  
tag, to the service panel.  
2-1. Drill two pilot holes into the wood support structure through the  
outermost holes in the outlet box. e pilot holes should be 9/64”  
in diameter.  
For Angled Ceilings: Be sure to orient the ceiling plate so that the  
two tabs are pointing toward the ceiling peak.  
For Angled Ceilings: Be sure to orient  
the ceiling plate so that the two tabs  
are pointing toward the ceiling peak.  
2-2. Your fan comes with four preinstalled noise isolators. Check to  
make sure all four isolators are in place and were not removed  
during shipment.  
2-3. Place a flat washer on each of the two 3” wood screws.  
2-4. read the supply wires from the outlet box in the ceiling through  
the hole in the center of the ceiling plate.  
2-5. Align the slotted holes in the ceiling plate with the pilot holes you  
drilled in the wood support structure. For proper alignment use  
slotted holes directly across from each other.  
Note: e isolators should be flush against the ceiling.  
2-6. Pass the screws through the slotted holes in the ceiling plate into  
the pilot holes you drilled.  
Tighten the screws into the 9/64” pilot holes; do not use lubricants  
on the screws. Do not over tighten.  
Ceiling  
Plate  
Flat Washer  
3” Wood  
Screw  
Steps 2-3 – 2-6  
5
42676-01 • 05/13/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 • Assembling and Hanging the Fan  
WARNING: Fan may fall if not assembled as directed in these  
Standard or Angled Mounting  
installation instructions.  
Steps 3-2 – 3-3  
3-1. Unbundle the wires from the fan.  
Downrod  
For Standard or Angled mounting:  
3-2. Insert the downrod through the canopy and canopy trim ring.  
Feed the wires from the fan through the downrod on one side of  
the pin in the ball.  
Canopy  
Canopy  
Trim Ring  
3-3. Loosen the square head setscrew on the adapter to install the pipe  
and ball assembly. Note: When the pipe and ball assembly is fully  
installed, 2-3 threads on the pipe will still be visible; this is normal.  
Securely retighten the setscrew with a wrench or pliers. Skip to  
step 3-7.  
Setscrew  
Low Profile Mounting  
CAUTION: e adapter has a special coating on the threads. Do  
not remove this coating; the coating prevents the downrod from  
unscrewing. Once assembled, do not remove the downrod.  
Steps 3-5 – 3-6  
Low Profile Screws  
Low Profile  
Washer  
Green  
Ground  
Wire  
For Low Profile mounting:  
Note: For low profile mounting, the downrod is replaced with the  
low profile washer.  
Canopy  
Trim Ring  
Canopy  
3-4. Remove the setscrew from the adapter.  
3-5. Place the low profile washer into the canopy with the lip down.  
3-6. Align the holes in the washer with the holes in the adapter.  
Assemble securely with three low profile screws.  
Low Profile Screw  
Hanging the Fan:  
Step 3-6 (Detail)  
Note: To hang the fan, you must tilt the canopy to an almost vertical  
position so that the canopy slots sit on the ceiling plate hooks.  
Low Profile Screw  
Adapter  
3-7. Raise the fan and align the slots in the canopy with the hooks on  
the ceiling plate.  
Low Profile  
Washer  
3-8. Place the slots over the hooks to hang the fan.  
6
42676-01 • 05/13/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 • Wiring the Fan  
All wiring must be in accordance with national and local electrical  
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a  
qualified electrician.  
Wall switches are not included. Select an acceptable general-use switch  
in accordance with national and local electrical codes.  
Wire  
Connector  
4-1. Before attempting installation, make sure the power is still off.  
Wattage  
Saver  
4-2. To connect the wires, hold the bare metal leads together and place  
a wire connector over them, then twist clockwise until tight. For  
all these connections use the wire connectors provided.  
Dual Switch  
Wiring  
4-3. Connect the bare or green ground wire from the ceiling to the  
green ground wire from the ceiling plate and the green ground  
wire from the fan.  
4-4. Connect the white wire from the ceiling to the white wire from  
the wattage saver (marked on red tag “NEUTRAL IN”).  
4-5. Connect the white wire from the fan to the other white wire from  
the wattage saver (marked on white tag “COMMON OUT”).  
4-6. Connect the black with a white stripe wire from the fan to the red  
wire from the wattage saver (marked on white tag “LIGHT OUT”).  
4-7. Connect the remaining wires as follows:  
Dual Switch Wiring:  
• e black wire from the ceiling to the black wire from the fan  
• e black wire from the wattage saver (marked on red tag  
“LIVE IN”) to the wire for the wall switch.  
Single Switch Wiring  
Wattage  
Saver  
Single Switch Wiring:  
• e black wire from the ceiling to the black wire from the fan  
and the black wire from the wattage saver (marked on red tag  
“LIVE IN”).  
CAUTION: Be sure no bare wire or wire strands are visible after  
making connections.  
4-8. Turn the splices upward and push them carefully back through the  
ceiling plate into the outlet box.  
4-9. Spread the wires apart, with the grounded wires on one side of  
the outlet box and the ungrounded wires on the other side of the  
outlet box.  
7
42676-01 • 05/13/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 • Installing the Canopy and Canopy Trim Ring  
WARNING: Failure to complete the following steps could cause the fan  
Step 5-1  
to fall.  
Note: It is recommended you use a magnetic tip screwdriver for the  
following steps.  
Tab  
5-1. Rotate the hanger ball so the tab in the canopy is secure in the  
hanger ball groove. Note: Your fan may have multiple tabs and  
grooves that must be aligned.  
Groove  
5-2. Swing the fan up to align the canopy screw holes with the  
mounting holes on the ceiling plate.  
Step 5-2  
WARNING: e slots in the canopy must remain engaged while  
swinging the canopy for alignment.  
5-3. Holding the canopy up with the screw holes aligned, partially  
install two canopy screws into the holes opposite the ceiling plate  
tabs.  
5-4. Partially install a canopy screw into the hole between the two  
ceiling plate tabs.When all the holes are properly aligned, securely  
tighten all three canopy screws.  
5-5. Verify that the tabs in the canopy are still in the grooves of the  
hanger ball.  
Step 5-3  
5-6. Align the tabs on the trim ring opposite the grooves in the hanger  
ball. Using both hands, push the canopy trim ring up to the top of  
the canopy. e canopy trim ring will snap and lock into place.  
Canopy  
Note: Should you need to remove the trim ring, press firmly on  
opposite sides of the trim ring directly above the groove in the  
hanger ball. e tabs will flex out releasing the canopy trim ring.  
Canopy  
Trim  
Ring  
Canopy Screw  
8
42676-01 • 05/13/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 • Assembling the Blades  
Hunter fans use several styles of fan blade irons (brackets that hold the  
blade to the fan).  
6-1. Your fan may include blade grommets. If your fan has grommets,  
insert them by hand into the holes on the blades.  
Step 6-1 (Detail)  
6-2. Attach each blade to a blade iron using three blade assembly  
screws. If you used grommets, the blades may appear slightly loose  
after screws are tightened. is is normal.  
6-3. Remove the blade mounting screws and rubber shipping bumpers  
from the motor. Note: Some blade mounting screws are installed  
in the motor to secure shipping blocks.  
6-4. For each blade, insert one blade mounting screw through the  
blade iron, and attach lightly to the fan. Insert the second blade  
mounting screw, then securely tighten both mounting screws.  
Grommet  
Steps 6-1 – 6-2  
Blade Assembly  
Screws  
Use with grommet  
Use without grommet  
Blade  
Mounting  
Screw  
Step 6-4  
9
42676-01 • 05/13/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 • Completing Your Installation With or Without a Bowl Light Fixture  
Your Hunter fan comes with an integrated light fixture assembly and an  
optional switch housing cap and plug button. is feature gives you the  
option of installing the fan with OR without the included light fixture.  
e steps below direct you whether or not you are installing a light  
fixture.  
.WARNING: Use only the light fixture supplied with this fan model.  
7-1 . If you want to install the light fixture, proceed with step 7-2  
now.  
. . If you do not want to install the light fixture, you need to  
uninstall it now. See “Uninstalling the Light Fixture” on page 11.  
Once you have uninstalled the light fixture, continue with step  
7-2  
7-2. To attach the lower switch housing, connect the upper plug  
connectors from the motor to the lower plug connectors in the  
lower switch housing assembly.  
. . Note: Both plug connectors are polarized and will only fit together  
one way. Make sure the connectors are properly aligned before  
connecting them. Incorrect connection could cause improper  
operation and damage to the product.  
7-3. Place the lower switch housing assembly over the upper switch  
housing. Align the side screw holes in the upper and lower switch  
housings. Attach the lower switch housing to the upper switch  
housing with two #6-32 x 7/8” housing assembly screws.  
If you are not installing the light fixture, your installation is  
complete. Otherwise, proceed with step 7-4.  
Housing  
Assembly Screw  
7-4. e last installation step when installing the light fixture is to  
install the glass bowl. See “Installing the Glass Bowl” on page 12 for  
instructions.  
10  
42676-01 • 05/13/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)  
Uninstalling the Light Fixture  
1. To uninstall the light fixture, first disconnect the plug connectors  
Lower Switch  
between the black wire and the black/white wire.  
Housing  
2. Disconnect the plug connectors between the two white wires.  
3. Uninstall the nut and washer from the end of the light fixture  
inside the lower switch housing.  
4. Unscrew the threaded rod of the light fixture from the lower  
switch housing.  
5. Remove the light fixture from the lower switch housing pulling  
disconnected wires through the hole in the center of the lower  
switch housing.  
.. Note: When removing the wires, pull the thin plug connector  
(male) through first, and then pull the other plug connector  
(female) through the hole.  
6. Install the dummy terminals (included in the sack parts) on the  
two disconnected wires in the lower switch housing.  
readed Rod  
7. Install the switch housing cap and plug button to the lower  
switch housing.  
Steps 3 – 5  
Male Dummy  
Terminal  
Cap  
Female Dummy  
Terminal  
Plug Button  
Step 7  
11  
42676-01 • 05/13/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)  
Installing the Glass Bowl  
Light Bulbs .  
(B10  
7-5. First install B10 candelabra bulbs (60  
Candelabra  
Base 60 Watt  
Maximum)  
Watt Maximum) into the  
sockets.  
7-6. Attach the extra pull chain (included)  
to the fan pull chain using the plastic  
breakaway connector. (You may find  
the plastic breakaway connector on  
the end of the extra chain.)  
7-7. read the fan pull chain through the  
hole in the metal disk. en, thread  
the fan pull chain through the hole in  
the center of the glass bowl.  
Metal Rod  
Metal Disk  
Glass Bowl  
Cover Plate  
Finial  
7-8. read the light pull chain through  
the hole in the center of the glass  
bowl. en, read the light pull chain  
throught the hole in the center of the cover plate.  
7-9. read the fan pull chain through the grommet hole in the side of  
the cover plate.  
7-10. Place the cover plate up against the glass bowl. Align the holes in  
the cover plate and glass bowl.  
7-11. read the light pull chain through the finial and screw the finial  
onto the threaded rod end until tight.  
Note: In compliance with US federal energy regulations, this  
ceiling fan contains a device that restricts the light kit to a  
maximum of 190 Watts. Exceeding that limit or the marked  
limit on this product may result in fire hazard or improper  
operation.  
12  
42676-01 • 05/13/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 • Operating and Cleaning Your Ceiling Fan  
8-1. Turn on electrical power to the fan.  
8-2. e fan pull chain controls power to the fan. e pull chain has  
four settings in sequence: High, Medium, Low, and Off.  
• Pull the chain slowly to change settings.  
• Release slowly to prevent the chain from recoiling into the  
blades.  
• e chain uses a breakaway connector that separates if the  
chain is jerked. If this happens, simply reinsert the chain into  
the connector.  
8-3. e light pull chain controls the power to the light fixture. e  
chain has two settings: ON and OFF.  
In warm weather, use  
downward air flow pattern  
8-4 . Ceiling fans work best by blowing air downward (counterclockwise  
blade rotation) in warm weather to cool the room with a direct  
breeze. In winter, having the fan draw air upward (clockwise blade  
rotation) will distribute the warmer air trapped at the ceiling  
around the room without causing a draft.  
8-5. For cleaning finishes, use a soft brush or lint-free cloth to prevent  
scratching. A vacuum cleaner brush nozzle can remove heavier  
dust. Remove surface smudges or accumulated dirt and dust using  
a mild detergent and a slightly dampened cloth. You may use  
an artistic agent, but never abrasive cleaning agents as they will  
damage the finish.  
8-6. Clean wood finish blades with a furniture polishing cloth.  
Occasionally, apply a light coat of furniture polish for added  
protection and beauty. Clean painted and high-gloss blades in the  
same manner as the fan finish.  
In cold weather, use upward .  
air flow pattern  
To Change Airflow Direction  
Turn the fan off and let it come to a complete  
stop. Slide the reversing switch on the fan to the  
opposite position. Restart fan.  
Reversing  
Switch  
13  
42676-01 • 05/13/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9 • Troubleshooting  
Problem: Nothing happens; fan does not move.  
1. Turn power on, replace fuse, or reset breaker.  
2. Loosen canopy, check all connections according to the wiring the  
fan section.  
3. Check the plug connection in the switch housing.  
4. Push motor reversing switch firmly left or right to ensure that the  
switch is engaged.  
5. Pull the pull chain to ensure it is on.  
6. Remove the shipping bumpers.  
Problem: Noisy operation.  
1. Tighten the blade assembly screws and blade iron armature screws  
until snug.  
2. Check to see if the blade is cracked. If so, replace all the blades.  
Problem: Excessive wobbling.  
1. If your fan wobbles when operating, use the enclosed balancing kit  
and instructions to balance the fan.  
2. Tighten all blade iron screws.  
3. Turn power off, support fan very carefully, and check that the  
hanger ball is properly seated.  
Problem: Lights dim when turned on or do not turn on  
1. Check to make sure the wattage and type of light bulbs installed  
match the specifications on the light socket.  
If you need parts or service assistance, please call  
888-830-1326 (In Canada, call 866-268-1936) or  
visit us at our Web site at .  
Hunter Fan Company  
7130 Goodlett Farms Pkwy. #400  
Memphis, Tennessee 38016  
14  
42676-01 • 05/13/09 • Hunter Fan Company  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Hans Grohe Plumbing Product 32111001 User Manual
Honeywell Humidifier HE120A User Manual
Hotpoint Refrigerator CTX18EACAA User Manual
Hotpoint Refrigerator FF40P User Manual
Hotpoint Refrigerator HM311i User Manual
HP Hewlett Packard Computer Hardware ML330 User Manual
Humax DVR OC 2700 User Manual
Husqvarna Chainsaw 2101xp User Manual
IBM Laptop 04P4963 User Manual
i Tech Dynamic Headphones Clip S38 User Manual