|
HS-7238
Pentium®4 PCI-ISA Bus
Industrial Single Board Computer
•Mini PCI•DDR•DVI/CRT•Dual LAN•
•Wireless LAN•Audio•ATA/33/66/100•
•USB2.0•WDT•H/W Monitor•
•PCI-ISA Bus Industrial Single Board computer•
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Chapter 1 General Description……………………..1
1.1
1.2
1.3
Major Features............................................................. 2
Specifications .............................................................. 3
Board Dimensions....................................................... 4
Chapter 2 Unpacking………………………………..5
2.1
2.2
Opening the Delivery Package................................... 5
Inspection..................................................................... 5
Chapter 3 Hardware Installation…………………...7
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
Before Installation ....................................................... 7
Board Layout ............................................................... 8
Jumper List .................................................................. 9
Connector List ............................................................. 9
Configuring the CPU ................................................... 9
System Memory......................................................... 10
VGA Controller........................................................... 10
PCI E-IDE Drive Connector........................................11
Floppy Disk Drive Connector................................... 13
Serial Port Connectors.............................................. 14
Parallel Connector..................................................... 15
Ethernet Connector................................................... 16
USB Connector.......................................................... 16
CMOS Data Clear....................................................... 17
Power and Fan Connectors...................................... 17
Keyboard/Mouse Connector .................................... 18
System Front Panel Connectors.............................. 19
External Speaker ....................................................... 20
Watchdog Timer......................................................... 20
Audio Connectors ..................................................... 21
Mini PCI Connector ................................................... 22
3.9
3.10
3.11
3.12
3.13
3.14
3.15
3.16
3.17
3.18
3.19
3.20
3.21
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Award BIOS Setup……………………..25
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
Starting Setup ............................................................ 25
Using Setup................................................................ 26
Main Menu.................................................................. 27
Standard CMOS Features ......................................... 28
Advanced BIOS Features ......................................... 29
Advanced Chipset Features ..................................... 30
Integrated Peripherals............................................... 31
Power Management Setup........................................ 32
PnP/PCI Configurations............................................ 33
PC Health Status........................................................ 34
Frequency/Voltage Control....................................... 34
Load Fail-Safe Defaults............................................. 35
Load Optimized Defaults .......................................... 36
Set Supervisor/User Password................................ 37
Save & Exit Setup...................................................... 38
Exit Without Saving................................................... 39
4.9
4.10
4.11
4.12
4.13
4.14
4.15
4.16
Chapter 5 Software Utilities……………………….41
5.1
5.2
5.3
5.4
5.5
IDE Driver Installation ............................................... 41
VGA Driver Installation.............................................. 48
LAN Driver Installation.............................................. 57
Audio Driver Installation........................................... 69
USB2.0 Driver Installation......................................... 71
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Integrated circuits on computer boards are sensitive to static electricity.
To avoid damaging chips from electrostatic discharge, observe the
following precautions:
ꢀ
Do not remove boards or integrated circuits from their anti-static
packaging until you are ready to install them.
ꢀ
Before handling a board or integrated circuit, touch an unpainted portion
of the system unit chassis for a few seconds. This helps to discharge any
static electricity on your body.
ꢀ
Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components. Fasten the ALLIGATOR
clip of the strap to the end of the shielded wire lead from a grounded
object. Please wear and connect the strap before handling the HS-7238
to protect yourself from the discharge of any static electricity through the
strap.
ꢀ
Please use an anti-static pad when putting down any components or
parts or tools outside the computer. You may also use an anti-static bag
instead of the pad. Please inquire from your local supplier for additional
assistance in finding the necessary anti-static gadgets.
DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENT WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
NOTE:
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
General Description
The HS-7238 is an Intel® 82845GV/82801DB chipset-based board
designed for PCI-ISA Bus PGA 478 Intel® Pentium® 4 up to 2.8GHz
CPU compatibility. The combination of these features makes the
HS-7238 an ideal all-in-one industrial single board computer.
Additional features include an enhanced I/O with DVI/CRT, dual LAN,
wireless LAN, audio and USB2.0 port interface.
Its onboard ATA/33/66/100 connected to IDE drive interface
architecture allows the HS-7238 to support data transfers of 33, 66 or
100MB/sec. for each IDE drive connection. Designed with the Intel®
82845GV/82801DB core logic chipset, the board supports all PGA 478
Pentium®4 CPU series operating up to 2.8GHz. The display controller
is Intel 82845GV with 1MB or 8MB (default) memory supporting CRT
display up to 1920 x 1200 x 32-bit at 60Hz. It also provides DVI display
interface.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
System memory is also sufficient with the one DDR socket that can
support up to 512MB.
Additional onboard connectors include an advanced USB2.0 port
providing faster data transmission, and two external RJ-45 connectors
for use of two 10/100 Base-TX Ethernet interfaces.
1.1 Major Features
The HS-7238 comes with the following features:
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
PGA 478 for Intel® Pentium® 4 up to 2.8GHz CPU
Mini PCI Local Bus support (optional)
One DDR socket with a max. capacity of 512MB
Intel 82845GV/82801DB system chipset
Winbond W83627 and ITE IT8888 super I/O chipset
Intel® 82845GV CRT display controller
Intel® 82559 and Intel® 82562 10/100 Based LAN
AC97 3D audio controller
Fast PCI ATA/33/66/100 IDE controller
Two COM, two USB2.0 connectors
Supports Hardware Monitor
Supports DVI display (optional)
Supports wireless LAN module (optional)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Specifications
ꢀ CPU: PGA 478 for Intel® Pentium® 4 up to 2.8GHz CPU
ꢀ Bus Interface: PCI-ISA Bus and Mini PCI Local Bus support (no 3.3V
output through goldfinger)
ꢀ Memory: One DDR socket supporting up to 512MB
ꢀ Chipset: Intel® 82845GV/82801DB
ꢀ I/O Chipset: Winbond W83627, ITE IT8888
ꢀ VGA: Intel® 82845GV with 1MB or 8MB supporting CRT display up to
1920 x 1200 x 32-bit at 60Hz
ꢀ DVI: Supports DVI display (optional)
ꢀ LAN: Intel® 82559 and Intel® 82562 10/100 Based LAN
ꢀ Wireless LAN: Supports wireless LAN module (optional)
ꢀ Audio: AC97 3D audio controller
ꢀ IDE: Four IDE disk drives supporting ATA/33/66/100 with transfer rates
of up to 33/66/100MB/sec.
ꢀ FDD: Supports up to two floppy disk drives
ꢀ Parallel: One enhanced bi-directional parallel port supporting
SPP/ECP/EPP
ꢀ Serial Port: 16C550 UART-compatible RS-232 x 2 serial ports with
16-byte FIFO
ꢀ USB: Two USB2.0 connectors
ꢀ Keyboard/Mouse: PS/2 6-pin Mini DIN
ꢀ BIOS: Award PnP Flash BIOS
ꢀ Watchdog Timer: Software programmable time-out intervals from
1~256sec.
ꢀ CMOS: Battery backup
ꢀ Power Connector: One 4-pin and one 20-pin ATX power connectors
ꢀ Temperature: 0~60°C (operating)
ꢀ Hardware Monitor: Winbond W83627
ꢀ Board Size: 18.6 x 12.2 cm
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3 Board Dimensions
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Unpacking
2.1 Opening the Delivery Package
The HS-7238 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2 Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Make sure all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
are firmly seated. The HS-7238 delivery package contains the following
items:
ꢀ HS-7238 Board x 1
ꢀ Utility CD Disk x 1
ꢀ ATA/100 IDE flat cable x 2
ꢀ FDD flat cable x 1
ꢀ Printer cable with bracket x 1
ꢀ Two RS-232 COM Port cable with bracket x 1
ꢀ 8-pin USB split type cable with bracket x 1
ꢀ PS/2 KB/MS transfer cable x 1
ꢀ MIC/Audio 8-pin cable x 1
ꢀ Cooling Fan & HeatSink x 1
ꢀ Jumper Bag x 1
ꢀ User’s Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
It is recommended that you keep all the parts of the delivery package
intact and store them in a safe/dry place for any unforeseen event
requiring the return shipment of the product. In case you discover any
missing and/or damaged items from the list of items, please contact
your dealer immediately.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Hardware Installation
This chapter provides the information on how to install the hardware
using the HS-7238. This chapter also contains information related to
jumper settings of switch, watchdog timer etc.
3.1 Before Installation
After confirming your package contents, you are now ready to install
your hardware. The following are important reminders and steps to
take before you begin with your installation process.
1.
Make sure that all jumper settings match their default settings
and CMOS setup correctly. Refer to the sections on this chapter
for the default settings of each jumper. (Set JP2 1-2)
2.
Go through the connections of all external devices and make
sure that they are installed properly and configured correctly
within the CMOS setup. Refer to the sections on this chapter
for the detailed information on the connectors.
3.
4.
Keep the manual and diskette in good condition for future
reference and use.
Make sure your power supply is using for P4 only. One of 4-pin
connectors is for +12V lead which should connect to PW2
connector of HS-7238.
NOTE: Since AD22 has been assigned for ISA bridge at HS-7238, please
make sure do not use this address for other PCI cards to avoid
confliction. In order to get detailed information, please contact
technical support engineer.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Board Layout
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Jumper List
Jumper
JP1
Default Setting
Clock Speed Select: Auto Select
Setting Page
1-2 Short
9
JP2
JP3
Clear CMOS: Normal Operation
Intel 82559 Enabled/Disabled Select: Enabled 1-2 Short
1-2 Short
17
16
3.4 Connector List
Connector
CD1
Definition
CD Analog Input Connector
Page
21
21
19
20
19
14
21
17
19
16
10
18
10
13
17
11
18
15
17
16
22
CD2
Line In Connector
CN1
Reset Connector
CN2
Speaker Connector
CN3
Green LED Connector
CN4 / CN5
CN6
COM2/COM1 Connector (5x2 header)
MIC In/Line Out Connector
2-pin ATX Power ON/OFF Switch
HDD LED Connector
CN7
CN8
CN10
Dual RJ-45 Connector
CN11
CN12
DM1
CRT or DVI Connector
6-pin Keyboard/Mouse Connector
DDR Socket
FD1
Floppy Connector
FAN1 / FAN2
ID1 / ID2
KB1
Fan Power Connectors
Primary/Secondary IDE Connectors
PS/2 6-pin Mini DIN KB/MS Connector
Parallel Connector
LP1
PW1 / PW2
US1 / US2 / US3
PC1
20-pin/4-pin ATX Power Connectors
USB Connectors
Mini PCI Connector
3.5 Configuring the CPU
The HS-7238 offers the convenience in CPU installation with its
auto-detect feature. After installing a new microprocessor onboard, the
HS-7238 automatically identifies the frequency and clock speed of the
installed microprocessor chip, thereby eliminating the need for user to
do additional CPU configuration or hardware settings related to it.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ
JP1: Clock Speed Select
Setting
Description
1-2 Short
2-3 Short
None
Auto Select
100MHz
133MHz
3.6 System Memory
The HS-7238 provides one DDR socket at location DM1. The
maximum capacity of the onboard memory is 512MB.
3.7 VGA Controller
The onboard Intel 82845GV with 1MB or 8MB memory supports CRT
display up to 1920 x 1200 x 32-bit at 60Hz. The HS-7238 provides two
methods of connecting VGA device. CN11 offers a single standard
CRT connector (DB15), or DVI connector.
ꢂ
CN11: 15-pin CRT Connector (DB15)
PIN Description PIN Description
6
1
Red
2
Green
1
5
11
15
3
5
7
9
11
13
15
Blue
4
6
8
10
12
14
N/C
GND
GND
N/C
N/C
HSYNC
SCL
GND
GND
GND
SDA
10
VSYNC
ꢂ
CN11: DVI Connector
PIN Description PIN
Description
TDC2
N/C
1
3
TD2C-
GND
2
4
5
7
9
11
13
15
17
19
21
23
N/C
6
8
DDCCLK
N/C
TDC1
N/C
VCC5
HPDET
TDC0
N/C
DDCDATA
TDC1-
GND
N/C
GND
TDC0-
GND
N/C
10
12
14
16
18
20
22
24
GND
CLK-
CLK
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.8 PCI E-IDE Drive Connector
ID1 and ID2 are standard 40-pin daisy-chain driver connector that
serves the PCI E-IDE drive provisions onboard the HS-7238. A
maximum of four ATA/33/66/100 IDE drives can be connected to the
HS-7238 via IDE1 and IDE2.
ꢂ ID1: Primary IDE Connector
PIN
Description
PIN
Description
1
3
5
7
RESET
PDATA 7
PDATA 6
PDATA 5
PDATA 4
PDATA 3
PDATA 2
PDATA 1
PDATA 0
GND
PDREQ
PIOW#
PIOR#
PIORDY
PDDACK-
Interrupt
PDA1
2
4
6
8
GND
PDATA 8
PDATA 9
PDATA 10
PDATA 11
PDATA 12
PDATA 13
PDATA 14
PDATA 15
N/C
GND
GND
GND
PR1PD1-
GND
9
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
N/C
PATA66
PDA2
PDCS3-
GND
PDA0
PDCS1-
HDD Active
4
3
6
5
8
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38
2
40
39
1
33
35 37
7
9
11 13 15 17 19 21 23 25 27 29 31
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ
ID2: Secondary IDE Connector
PIN
Description
PIN
Description
1
3
5
7
RESET
SDATA 7
SDATA 6
SDATA 5
SDATA 4
SDATA 3
SDATA 2
SDATA 1
SDATA 0
GND
SDREQ
SIOW#
SIOR#
SIORDY
SDDACK-
Interrupt
SDA1
2
4
6
8
GND
SDATA 8
SDATA 9
SDATA 10
SDATA 11
SDATA 12
SDATA 13
SDATA 14
SDATA 15
N/C
GND
GND
GND
SD1-
GND
N/C
PATA66
SDA2
SDS3-
9
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
SDA0
SCS1-
HDD Active
GND
4
3
6
5
8
7
10 12 14 16 18 20 22 24 26 28 30 32 34 36 38
2
40
39
1
33
35 37
9
11 13 15 17 19 21 23 25 27 29 31
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3.9 Floppy Disk Drive Connector
The HS-7238 uses a standard 34-pin header connector, FD1, for
floppy disk drive connection. A total of two FDD drives may be
connected to FD1 at any given time.
ꢂ FD1: FDD Connector
PIN
Description
PIN
Description
1
3
5
7
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
N/C
2
4
6
8
DRVDEN0
N/C
DRVDEN1
INDEX#
MTRA#
DSB#
DSA#
MTRB#
DIR#
9
10
12
14
16
18
20
22
24
26
28
30
32
34
11
13
15
17
19
21
23
25
27
29
31
33
STEP#
WDATA#
WGATE#
TRAK00#
WRTPRT#
RDATA#
HDSEL#
DSKCHG#
GND
N/C
2
1
34
33
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3.10 Serial Port Connectors
The HS-7238 offers one NS16C550 compatible UARTs with
Read/Receive 16-byte FIFO serial ports and two internal 10-pin
headers.
ꢂ CN5: COM1 Connector (5x2 Header)
PIN Description PIN Description
1
3
5
7
9
DCD0
RXDD0
TXDD0
DTR0
2
4
6
8
10
DSR0
RTS0
CTS0
RI0
DCD0
RXDD0
TXDD0
DTR0
1
3
5
7
9
2
4
6
8
DSR0
RTS0
CTS0
RI0
GND
N/C
GND
10 N/C
ꢂ CN4: COM2 Connector (5x2 Header)
PIN Description PIN Description
1
3
5
7
9
DCD1
RXDD1
TXDD1
DTR1
2
4
6
8
10
DSR1
RTS1
CTS1
RI1
DCD1
RXDD1
TXDD1
DTR1
1
3
5
7
9
2
4
6
8
DSR1
RTS1
CTS1
RI1
GND
N/C
GND
10 N/C
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3.11 Parallel Connector
LP1 is a standard 26-pin flat cable connector designed to
accommodate parallel port connection onboard the HS-7238.
ꢂ LP1: Parallel Connector
PIN Description PIN Description
1
2
3
Strobe
DATA 0
DATA 1
14
15
16
Auto Form Feed
ERROR#
Initialize
4
DATA 2
17 Printer Select LN#
5
6
7
8
DATA 3
DATA 4
DATA 5
DATA 6
18
19
20
21
22
23
24
25
26
GND
GND
GND
GND
GND
GND
GND
GND
GND
9
DATA 7
10
11
12
13
Acknowledge
Busy
Paper Empty
Printer Select
26
13
14
1
15
Download from Www.Somanuals.com. All Manuals Search And Download.
3.12 Ethernet Connector
The HS-7238 provides two 10/100 Base-TX LAN interface connectors.
Please refer to the following for its pin information.
ꢂ
CN10: Dual RJ-45 Connector
PIN Description PIN Description
1
3
5
7
9
11
13
15
17
19
21
23
1TX+
1RX+
R/C GND
R/C GND
2TX+
2
4
6
8
10
12
14
16
18
20
22
24
1TX-
R/C GND
1RX-
R/C GND
2TX-
R/C GND
2RX-
R/C GND
Power
1TX+
1TX-
1RX+
R/C GND
1RX-
R/C GND
R/C GND
R/C GND
2RX+
2TX+
2TX-
R/C GND
R/C GND
559 LILED
559 ACTLED
562 LILED
562 ACTLED
2RX+
R/C GND
2RX-
R/C GND
R/C GND
R/C GND
Power
Power
Power
ꢂ
JP3: Intel 82559 Enabled/Disabled Select
Options
Enabled (default)
Disabled
Settings
Short 1-2
Short 2-3
1
3
3.13 USB Connector
The HS-7238 provides one 8-pin USB2.0 connector at location US2
and two 4-pin USB1.1 connectors, at locations US1 and US3, for four
USB connections to the HS-7238.
ꢂ
US1: USB Connector
PIN Description PIN Description
1
4
1
VCC
2
DATA2-P
3
DATA2-N
4
GND
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ
ꢂ
US2: USB2.0 Connector
1
2
PIN Description PIN Description
VCC
DATA0-N
DATA0-P
GND
VCC
1
3
5
7
VCC
DATA0-N
DATA0-P
GND
2
4
6
8
VCC
DATA1-N
DATA1-P
GND
DATA1-N
DATA1-P
GND
7
8
US3: USB Connector
PIN Description PIN Description
1
4
1
VCC
2
DATA3-P
3
DATA3-N
4
GND
3.14 CMOS Data Clear
The HS-7238 has a Clear CMOS jumper on JP2.
JP2: Clear CMOS
Options
ꢂ
Settings
1
3
Normal Operation (default)
Short 1-2
Clear CMOS
Short 2-3
IMPORTANT: Before you turn on the power of your system, please
set JP2 to short 1-2 for normal operation.
3.15 Power and Fan Connectors
HS-7238 provides one 20-pin and one 4-pin ATX power connectors at
PW1 and PW2.
HS-7238 must use P4 power supply. One of 4-pin connectors is for
+12V lead which should be connected to PW2.
20-pin ATX Power Connector can be connected to Backplane or to
PW1.
ꢂ
PW2: 4-pin ATX Power Connector
PIN Description PIN Description
1
3
2
4
1
GND
2
GND
GND
+12V
GND
+12V
3
12V
4
12V
17
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ
PW1: 20-pin ATX Power Connector
PIN Description PIN Description
1
11
3.3V
3.3V
GND
+5V
3.3V
1
2
3
4
5
6
7
8
3.3V
3.3V
GND
+5V
GND
+5V
GND
PWOK
5Vsb
+12V
11
12
13
14
15
16
17
18
19
20
3.3V
-12V
GND
PS_ON
GND
GND
GND
-5V
-12V
GND
PS_ON
GND
+5V
GND
GND
GND
-5V
GND
PWOK
5VSB
+5V
+12V
+5V
9
10
+5V
+5V
10
20
ꢂ
CN7: 2-pin ATX Power On/Off Switch
PIN
1
2
Description
Pull 220Ωto VCCSTBY
PANSWIN
1
2
FAN1 and FAN2 onboard HS-7238 are 3-pin fan power connectors.
ꢂ
FAN1: Fan Power Connector
PIN Description
1
2
3
GND
+12V
Fan In 1
1
3
ꢂ
FAN2: Fan Power Connector
PIN Description
1
2
3
GND
+12V
Fan In 2
1
3
3.16 Keyboard/Mouse Connector
The HS-7238 offers one possibility for keyboard/mouse connection.
The connections are done via KB1 for an external PS/2 type
keyboard/mouse and CN12 for internal 6-pin keyboard/mouse
connection.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ
ꢂ
KB1: PS/2 6-pin Mini DIN Keyboard/Mouse Connector
PIN
Description
Keyboard Data
Mouse Data
GND
+5V
Keyboard Clock
Mouse Clock
Keyboard
Clock
GND
3
1
1
2
3
4
5
6
5
6
Keyboard
Data
Mouse
Data
2
4
Mouse
Clock
+5V
CN12: 6-pin Keyboard/Mouse Connector
PIN
Description
KDATA
MDATA
GND
1
1
2
3
4
5
6
VCC
KCLK
MCLK
6
3.17 System Front Panel Connectors
The HS-7238 has one LED at location CN3 that indicates the system
front panel status. This visual feature of the HDD LED may also be
connected to an external HDD LED via connector CN8.
1
2
1
2
CN8
CN3
CN7
CN1
1
2
1
2
ꢂ
ꢂ
ꢂ
CN8: HDD LED Connector
PIN
1
2
Description
150ΩPull +5V
HDD LED
CN3: Green LED Connector
PIN
1
2
Description
150ΩPull +5V
Suspend LED
CN1: Reset Button Connector
PIN
Description
1
GND
2
Reset
19
Download from Www.Somanuals.com. All Manuals Search And Download.
3.18 External Speaker
Aside from the buzzer at location BZ1 onboard, the HS-7238 also
offers a connector (CN2) for an external speaker connection. The table
below lists the pin assignments of CN2.
ꢂ
CN2: Speaker Connector
PIN
Description
1
2
3
4
1
2
3
4
+5V
GND
GND
Speak In
3.19 Watchdog Timer
Once the Enable cycle is active, a Refresh cycle is requested before
the time-out period. This restarts counting of the WDT period. When
the time counting goes over the period preset of WDT, it will assume
that the program operation is abnormal. A System Reset signal will
re-start when such error happens.
The following sample programs show how to Enable, Disable and
Refresh the Watchdog Timer:
;----------------------------------------------------------------------------------
; Enter the WDT function mode, interruptible double-write
;----------------------------------------------------------------------------------
MOV
MOV
OUT
OUT
MOV
MOV
OUT
MOV
MOV
OUT
MOV
MOV
OUT
MOV
MOV
OUT
MOV
MOV
OUT
MOV
DX, 2EH
AL, 87H
DX, AL
DX, AL
DX, 2EH
AL, 07H
DX, AL
DX, 2FH
AL, 08H
DX, AL
DX, 2EH
AL, F5H
DX, AL
DX, 2FH
AL, 80H
DX, AL
; select CRF0
DX, 2EH
AL, F7H
DX, AL
DX, 2FH
MOV
OUT
AL, 00H
DX, AL
20
Download from Www.Somanuals.com. All Manuals Search And Download.
MOV
MOV
OUT
MOV
MOV
OUT
DX, 2EH
AL, F6H
DX, AL
DX, 2FH
AL, 00H
DX, AL
; * 00H=Disabled
;---------------------------------------------------------------------------------
; Exit extended function mode
;------------- -------------------------------------------------------------------
MOV
MOV
OUT
DX, 2EH
AL, AAH
DX, AL
* User can also use AL, 00H’s defined time for reset purposes, e.g.00H
for Disable, 01H = 1sec, 02H = 2sec…..FFH = 255sec.
3.20 Audio Connectors
The HS-7238 has an onboard AC97 3D audio interface. The following
tables list the pin assignments of the CD-ROM Analog Input, the Line In
and the MIC In/Line Out connectors.
ꢂ
ꢂ
ꢂ
CD1: CD-ROM Analog Input Connector
PIN
Description
CD_R
1
2
3
4
1
2
3
4
CD_REF
CD_REF
CD_L
CD2: Line In Analog Input Connector
PIN
Description
LINE_R
GND
1
2
3
4
1
2
3
4
GND
LINE_L
CN6: Mic In/Line Out Connector
PIN Description PIN Description
1
3
5
7
AOUT_L
GND
MIC In
GND
2
4
6
8
AOUT_R
GND
N/C
GND
2
1
8
7
21
Download from Www.Somanuals.com. All Manuals Search And Download.
3.21 Mini PCI Connector
HS-7238 supports a Mini PCI interface which is a very popular
notebook computer expansion interface for Modem, Video, LAN,
etc. The Mini PCI onboard HS-7238 is at location PC1 with pin
definitions listed on the table below.
ꢂ
PC1: Mini PCI Connector Pin Information
PIN
Description
PIN
Description
1
3
INTB#
3.3V
2
4
5V
D#
5
7
RESERVED
GND
6
8
RESERVED
N.C.
9
CLK
GND
REQ#
3.3V
AD[31]
AD[29]
GND
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
RST#
3.3V
GNT#
GND
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
PME#
RESERVED
AD[30]
3.3V
AD[27]
AD[25]
RESERVED
C/BE[3]#
AD[23]
GND
AD[21]
AD[19]
GND
AD[17]
C/BE[2]#
IRDY#
3.3V
CLKRUN#
SERR#
GND
PERR#
C/BE[1]#
AD[14]
GND
AD[28]
AD[26]
AD[24]
IDSEL
GND
AD[22]
AD[20]
PAR
AD[18]
AD[16]
GND
FRAME#
TRDY#
STOP#
3.3V
DEVSEL#
GND
AD[15]
AD[13]
AD[11]
GND
AD[12]
AD[10]
. . . More on next page . . .
22
Download from Www.Somanuals.com. All Manuals Search And Download.
PIN
Description
PIN
Description
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
GND
AD[8]
AD[7]
3.3V
AD[5]
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
AD[9]
C/BE[0]#
3.3V
AD[6]
AD[4]
RESERVED
AD[3]
AD[2]
AD[0]
RESERVED_WIP2
RESERVED_WIP2
GND
5V
AD[1]
GND
AC_SYNC
AC_SDATA_IN
AC_BIT_CLK
AC_CODEC_ID1#
MOD_AUDIO_MON
AUDIO_GND
SYS_AUDIO_OUT
M66EN
AC_SDATA_OUT
AC_CODEC_IDO#
AC_RESET#
RESERVED
GND
SYS_AUDIO_IN
2
100
99
1
Mini PCI Socket
pin orientation
23
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Award BIOS Setup
The HS-7238 uses Award BIOS for the system configuration. The
Award BIOS setup program is designed to provide the maximum
flexibility in configuring the system by offering various options that
could be selected for end-user requirements. This chapter is written to
assist you in the proper usage of these features.
4.1 Starting Setup
The Award BIOS is immediately activated when you first power on the
computer. The BIOS reads the system information contained in the
CMOS and begins the process of checking out the system and
configuring it. When it finishes, the BIOS will seek an operating system
on one of the disks and then launch and turn control over to the
operating system.
While the BIOS is in control, the Setup program can be activated in one
of two ways:
1. By pressing <Del> immediately after switching the system on, or
2. By pressing the <Del> key when the following message appears
briefly at the bottom of the screen during the POST (Power On Self
Test).
Press DEL to enter SETUP.
If the message disappears before you respond and you still wish to
enter Setup, restart the system to try again by turning it OFF then ON or
pressing the "RESET" button on the system case. You may also restart
by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. If you do
not press the keys at the correct time and the system does not boot, an
error message will be displayed and you will again be asked to...
PRESS F1 TO CONTINUE, DEL TO ENTER SETUP
25
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to
select, use the <PageUp> and <PageDown> keys to change entries,
press <F1> for help and press <Esc> to quit. The following table
provides more detail about how to navigate the Setup program using
the keyboard.
Up arrow
Down arrow
Left arrow
Right arrow
Esc key
Move to previous item
Move to next item
Move to the item in the left hand
Move to the item in the right hand
Main Menu -- Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu --
Exit current page and return to Main Menu
Increase the numeric value or make changes
Decrease the numeric value or make changes
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option
Page Setup Menu
PgUp key
PgDn key
+ key
- key
F1 key
(Shift)F2 key
Change color from total 16 colors. F2 to select color
forward, (Shift) F2 to select color backward
Calendar, only for Status Page Setup Menu
Reserved
Restore the previous CMOS value from CMOS, only for
Option Page Setup Menu
F3 key
F4 key
F5 key
F6 key
Load the default CMOS value from BIOS default table, only
for Option Page Setup Menu
F7 key
F8 key
F9 key
F10 key
Load the default
Reserved
Reserved
Save all the CMOS changes, only for Main Menu
4.2.1 Getting Help
Press F1 to pop up a small help window that describes the appropriate
keys to use and the possible selections for the highlighted item. To exit
the Help Window press <Esc> or the F1 key again.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 Main Menu
Once you enter the Award BIOS CMOS Setup Utility, the Main Menu
will appear on the screen. The Main Menu allows you to select from
several setup functions and two exit choices. Use the arrow keys to
select among the items and press <Enter> to enter the sub-menu.
CMOS Setup Utility – Copyright © 1984-2001 Award Software
` Standard CMOS Features
` Advanced BIOS Features
` Advanced Chipset Features
` Integrated Peripherals
` Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
` Power Management Setup
` PnP/PCI Configurations
Save & Exit Setup
` PC Health Status
Esc：Quit
Exit Without Saving
F9：Menu in BIOS ꢃꢄꢅꢆ：Select Item
F10：Save & Exit Setup
NOTE: A brief description of the highlighted choice appears at the bottom
of the screen.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 Standard CMOS Features
The Standard Setup is used for the basic hardware system
configuration. The main function is for Data/Time and Floppy/Hard Disk
Drive settings. Please refer to the following screen for the setup. When
the IDE hard disk drive you are using is larger than 528MB, you must
set the HDD mode to
mode. Please use the IDE Setup Utility in
LBA
BIOS SETUP to install the HDD correctly.
CMOS Setup Utility – Copyright © 1984-2001 Award Software
Standard CMOS Features
Date (mm:dd:yy)
Time (hh:mm:ss)
Wed, Jul 11 2001
10 : 32 :57
Item Help
Menu Level
X
X IDE Primary Master
X IDE Primary Slave
X IDE Secondary Master
X IDE Secondary Slave
[Auto]
[Auto]
[Auto]
[Auto]
Change the day, month,
year and century
Drive A
Drive B
[1.44M, 3.5in.]
[None]
Video
[EGA/VGA]
Halt On
[All, But Keyboard]
Base Memory
Extended Memory
Total Memory
640K
252928K
253952K
ꢃꢄꢅꢆ: Select Item + / - /PU/PD: Value
F5: Previous Values
F10: Save ESC: Quit F1: General Help
F6: Fail-Safe Defaults F7: Optimized Defaults
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4.5 Advanced BIOS Features
This section allows you to configure your system for the basic
operation. You have the opportunity to select the system’s default
speed, boot-up sequence, keyboard operation, shadowing and
security.
CMOS Setup Utility－Copyright ©1984-2001 Award Software
Advanced BIOS Features
Virus Warning
Disabled
Enabled
Enabled
Enabled
Floppy
HDD-0
LS120
Enabled
Disabled
Enabled
On
Item Help
Menu Level
CPU L1 & L2 Cache
Hyper-Threading Technology
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up Num Lock Status
Gate A20 Option
X
Change the day, month,
year and century
Fast
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
Disabled
6
250
Setup
APIC Mode
Enabled
1.4
Non-OS2
NO
MPS Version Control For OS
OS Select For DRAM > 64MB
Report on FDD for WIN95
Small Logo (EPA) Show
Enabled
ꢃꢄꢅꢆ: Select Item + / - /PU/PD: Value
F5: Previous Values
F10: Save ESC: Quit F1: General Help
F6: Fail-Safe Defaults F7: Optimized Defaults
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4.6 Advanced Chipset Features
This section allows you to configure the system based on the specific
features of the installed chipset. This chipset manages bus speeds and
the access to the system memory resources, such as DRAM and the
external cache. It also coordinates the communications between the
conventional ISA and PCI buses. It must be stated that these items
should never be altered. The default settings have been chosen
because they provide the best operating conditions for your system.
You might consider making any changes only if you discover that the
data has been lost while using your system.
CMOS Setup Utility－Copyright ©1984-2001 Award Software
Advanced Chipset Features
DRAM Timing Selectable
CAS Latency Time
By SPD
1.5
Item Help
Menu Level
X
Active to Precharge Delay
DRAM RAS# to CAS# Delay
DRAM RAS# Precharge
Turbo Mode
Memory Frequency For
System BIOS Cacheable
Video BIOS Cacheable
Memory Hole At 15M-16M
Delayed Transaction
7
3
3
Change the day, month,
year and century
Disabled
Auto
Enabled
Enabled
Disabled
Enabled
16Min
64
Delay Prior to Thermal
AGP Aperture Size (MB)
** ON-chip VGA Setting **
On-chip VGA
On-chip Frame Buffer size
Enabled
8MB
ꢃꢄꢅꢆ: Select Item + / - /PU/PD: Value
F5: Previous Values
F10: Save ESC: Quit F1: General Help
F6: Fail-Safe Defaults F7: Optimized Defaults
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4.7 Integrated Peripherals
The IDE hard drive controllers can support up to two separate hard
drives. These drives have a master/slave relationship that is
determined by the cabling configuration used to attach them to the
controller. Your system supports two IDE controllers--a primary
and a secondary--so you can install up to four separate hard disks.
PIO means Programmed Input/Output. Rather than having the
BIOS issue a series of commands to affect the transfer to or from
the disk drive, PIO allows the BIOS to tell the controller what it
wants and then let the controller and the CPU perform the
complete task by themselves. This is much simpler and more
efficient (also faster).
CMOS Setup Utility－Copyright ©1984-2001 Award Software
Integrated Peripherals
On-chip Primary PCI IDE
IDE Primary Master PIO
Enabled
Item Help
Menu Level
Auto
X
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
USB Controller
Auto
Auto
Auto
Enabled
Auto
Auto
Auto
Auto
Enabled
Enabled
Enabled
Enabled
Auto
Change the day, month,
year and century
USB2.0 Controller
USB Keyboard Support
USB Mouse Support
AC97 Audio
Init Display First
Onboard/AGP
Enabled
BUTTON ONLY
Enter
Ctrl-F1
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Hi, Lo
IDE HDD Block Mode
POWER ON Function
KB Power ON Password
Hot Key Power ON
Onboard FDC Controller
Onboard Serial Port1
Onboard Serial Port2
UART Mode Select
RxD, TxD Active
IR Transmission delay
UR2 Duplex Mode
Enabled
Half
Use IR Pins
Onboard Parallel Port
Parallel Port Mode
IR-Rx2Tx2
378/IRQ7
SPP
EPP Mode Select
ECP Mode Use DMA
POWER After PWR-Rail
EPP1.7
3
Off
ꢃꢄꢅꢆ: Select Item + / - /PU/PD: Value
F10: Save ESC: Quit F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults F7: Optimized Defaults
31
Download from Www.Somanuals.com. All Manuals Search And Download.
4.8 Power Management Setup
The Power Management Setup allows user to configure the system for
saving energy in a most effective way while operating in a manner
consistent with his own style of computer use.
CMOS Setup Utility－Copyright ©1984-2001 Award Software
Power Management Setup
ACPI function
Enabled
S1(POS)
Auto
User Define
DPMS
Yes
Stop Grant
3
Item Help
Menu Level
ACPI Suspend Type
Run VGABIOS if S3 Resume
Power Management
Video off Method
Video off In Suspend
Suspend Type
X
Change the day, month,
year and century
MODEM Use IRQ
Suspend Mode
Disabled
Disabled
Instant-Off
50.00%
Disabled
Disabled
Disabled
Disabled
0
HDD Power Down
Soft-off by PWR-BTTN
CPU THRM-throttling
Wake-up by PCI card
Power On by Ring
USB KB Wake-up From S3
Resume by Alarm
Date(of Month) Alarm
Time(hh:mm:ss) Alarm
0:0:0
** Reload Global Timer Events **
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ[A-D]#
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
ꢃꢄꢅꢆ: Select Item + / - /PU/PD: Value
F5: Previous Values
F10: Save ESC: Quit F1: General Help
F6: Fail-Safe Defaults F7: Optimized Defaults
32
Download from Www.Somanuals.com. All Manuals Search And Download.
4.9 PnP/PCI Configurations
This section describes the configuration of the PCI bus system. PCI, or
Peripheral Components Interconnect, is a system that allows I/O
devices to operate at speeds nearing the speed the CPU itself uses
when communicating with its own special components. This section
covers some very technical items and it is strongly recommended that
only experienced users should make any changes to the default
settings.
CMOS Setup Utility－Copyright ©1984-2001 Award Software
PnP/PCI Configurations
PNP OS Installed
Reset Configuration Date
Resources controlled By
IRQ Resources
DMA Resources
IRQ-3 Assigned to
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ12
IRQ13
IRQ14
IRQ15
PCI/VGA Palette Snoop
No
Disabled
Item Help
Menu Level
X
Auto (ESCD)
Press Enter
Press Enter
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
Disabled
Change the day, month,
year and century
ꢃꢄꢅꢆ: Select Item + / - /PU/PD: Value
F5: Previous Values
F10: Save ESC: Quit F1: General Help
F6: Fail-Safe Defaults F7: Optimized Defaults
33
Download from Www.Somanuals.com. All Manuals Search And Download.
4.10 PC Health Status
CMOS Setup Utility－Copyright ©1984-2001 Award Software
PC Health Status
CPU Warning Temperature
Current System Temp
Disabled
Item Help
Menu Level
X
Current CPU Temperature
Current CPU FAN Speed
Current System FAN Speed
XXXX RPM
XXXX RPM
Change the day, month,
year and century
Vcore
+3.3V
+5V
+12V
-12V
3.37V
5.08V
12.09V
-12.19V
-5.04
-5V
VBAT(V)
3.2V
5VSB(V)
Shutdown Temperature
5.00V
Disabled
ꢃꢄꢅꢆ: Select Item + / - /PU/PD: Value
F5: Previous Values
F10: Save ESC: Quit F1: General Help
F6: Fail-Safe Defaults F7: Optimized Defaults
4.11 Frequency/Voltage Control
CMOS Setup Utility－Copyright ©1984-2001 Award Software
Frequency/Voltage Control
CPU Clock Ratio
Auto Detect PCI Clk
Spread Specturm
[8x]
Enabled
Disabled
Item Help
Menu Level
X
Change the day, month,
year and century
ꢃꢄꢅꢆ: Select Item + / - /PU/PD: Value
F5: Previous Values
F10: Save ESC: Quit F1: General Help
F6: Fail-Safe Defaults F7: Optimized Defaults
34
Download from Www.Somanuals.com. All Manuals Search And Download.
4.12 Load Fail-Safe Defaults
When you press <Enter> on this item you will get a confirmation dialog
box with a message shown below. This option allows you to
load/restore the BIOS default values permanently stored in the BIOS
ROM. Pressing ‘Y’ loads the BIOS default values for the most stable,
minimal-performance system operations.
CMOS Setup Utility－Copyright ©1984-2001 Award Software
X STANDARD CMOS Features
X Frequency/Voltage Control
X Advanced BIOS Features
X Advanced Chipset Features
X Integrated Peripherals
X Power Management
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
word
etup
Load Fail-Safe Defaults (Y/N)? N
X PnP/PCI Configura
X PC Health Status
Saving
ꢃꢄꢅꢆ
Esc : Quit
F10 : Save & Exit Setup
: Select Item
Load Fail-Safe Defaults
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4.13 Load Optimized Defaults
When you press <Enter> on this item you get a confirmation dialog box
with a message similar to the figure below. This option allows you to
load/restore the default values to your system configuration, optimizing
and enabling all high performance features. Pressing ‘Y’ loads the
default values that are factory settings for optimal performance system
operations.
CMOS Setup Utility－Copyright ©1984-2001 Award Software
X Standard CMOS Features
X Frequency/Voltage Control
X Advanced BIOS Features
X Advanced Chipset Features
X Integrated Peripherals
X Power Management
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
word
etup
Load Optimized Defaults (Y/N)? N
X PnP/PCI Configura
X PC Health Status
Saving
ꢃꢄꢅꢆ
Esc : Quit
: Select Item
F10 : Save & Exit Setup
Load Optimized Defaults
36
Download from Www.Somanuals.com. All Manuals Search And Download.
4.14 Set Supervisor/User Password
CMOS Setup Utility－Copyright ©1984-2001 Award Software
X Standard CMOS Features
X Frequency/Voltage Control
X Advanced BIOS Features
X Advanced Chipset Features
X Integrated Peripherals
X Power Management Setup
X PnP/PCI Configurati
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
t Setup
Enter Password :
X PC Health Status
ut Saving
ꢃꢄꢅꢆ
Esc : Quit
F10 : Save & Exit Setup
: Select Item
Change / Set / Disable Password
You can set either supervisor or user password, or both of them. The
differences between are:
ꢂ
supervisor password: can enter and change the options of the setup
menus.
ꢂ
user password: just can only enter but do not have the right to change the
options of the setup menus.
When you select this function, the following message will appear at the
center of the screen to assist you in creating a password.
ENTER PASSWORD:
Type the password, up to eight characters in length, and press
<Enter>. The password typed now will clear any previously entered
password from CMOS memory. You will be asked to confirm the
password. Type the password again and press <Enter>. You may also
press <Esc> to abort the selection and not enter a password.
To disable a password, just press <Enter> when you are prompted to
enter the password. A message is confirmed and the password will be
disabled. Once the password is disabled, the system will boot and you
can enter Setup freely.
PASSWORD DISABLED.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
When a password has been enabled, you will be prompted to enter it
every time you try to enter Setup. This prevents an unauthorized
person from changing any part of your system configuration.
Additionally, when a password is enabled, you can also require the
BIOS to request a password every time your system is rebooted. This
would prevent unauthorized use of your computer.
You determine when the password is required within the BIOS
Features Setup Menu and its Security option (see Section 3). If the
Security option is set to “System”, the password will be required both at
boot and at entry to Setup. If set to “Setup”, prompting only occurs
when trying to enter Setup.
4.15 Save & Exit Setup
Press <Enter> on this item for confirmation:
Pressing “Y” stores the selections made in the menus in CMOS – a
special section of memory that stays on after you turn your system off.
The next time you boot your computer, the BIOS configures your
system according to the Setup selections stored in CMOS. After saving
the values the system is restarted again.
CMOS Setup Utility－Copyright ©1984-2001 Award Software
X Standard CMOS Features
X Frequency/Voltage Control
X Advanced BIOS Features
X Advanced Chipset Features
X Integrated Peripherals
X Power Management
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
word
SAVE to CMOS and EXIT (Y/N)? N
X PnP/PCI Configura
X PC Health Status
etup
Saving
ꢃꢄꢅꢆ
Esc : Quit
: Select Item
F10 : Save & Exit Setup
Save Data to CMOS
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4.16 Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
Quit without saving (Y/N)? Y
This allows you to exit Setup without storing any change in CMOS. The
previous selections remain in effect. This exits the Setup utility and
restarts your computer.
CMOS Setup Utility－Copyright ©1984-2001 Award Software
X Standard CMOS Features
X Frequency/Voltage Control
X Advanced BIOS Features
X Advanced Chipset Features
X Integrated Peripherals
X Power Management
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
word
Quit Without Saving (Y/N)? N:
X PnP/PCI Configura
X PC Health Status
etup
Saving
ꢃꢄꢅꢆ
Esc : Quit
F10 : Save & Exit Setup
: Select Item
Abandon all Data
39
Download from Www.Somanuals.com. All Manuals Search And Download.
This Page is intentionally left blank.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Software Utilities
This chapter contains the detailed information of IDE, VGA, LAN and
Audio driver installation procedures. The utility disk that come with the
delivery package contains an auto-run program that invokes the
installation programs for the IDE, VGA, LAN and Audio drivers. The
following sections describe the installation procedures of each driver
based on Win 95/98, Win 2000 and Win NT operating systems. It is
recommended that you install the drivers matching the sections listed
in this chapter.
5.1 IDE Driver Installation
5.1.1 Installing Intel Chipset Software Utility
1. Insert Utility CD Disk to your CD ROM drive. The main menu will
pop up as shown below. Select on the HS-7238 button to
launch the installation program.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Click on the ICH4 Driver button to continue.
3. Immediately after clicking the IDE button in Step 1, the program
launches the InstallShield Wizard that will assist you in the
installation process. Click on the Next > button to proceed.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
4. The Intel OEM Software License Agreement dialog box then
appears on the screen. Choose Yes to proceed.
5. When the Readme Information dialog box pops up, just click on
the Next button to proceed.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Once the Install Shield Wizard finishes updating your system, it
will prompt you to restart the computer. Tick on the Yes, I
want to restart my computer now followed by a click on the
Finish button to reboot. Only after your computer boots will the
new settings take effect.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1.2 Installing Intel Application Accelerator
1. Insert Utility CD Disk into your CD ROM drive. The main menu will
pop up as shown below. Select on the HS-7238 button to launch
the installation program.
2. Click on the IDE Driver button to continue.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
3. When the dialog box below appears, make sure you close all
other Windows applications then click on the Next > button to
proceed.
4. The Intel OEM Software License Agreement dialog box then
appears on the screen. Choose Yes to proceed.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Setup will then prompt you to specify the path where you would
like the Security driver installed. Select the Next > button after
you have made your path/installation choice.
6. Once the setup program finishes copying files into your system, it
will prompt you to restart the computer. Tick on the Yes, I want
to restart my computer now followed by a click on the Finish
button to reboot. Only after your computer boots will the new
settings take effect.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 VGA Driver Installation
5.2.1 Win 98
1. Insert Utility CD Disk into your CD ROM drive. The main menu will
pop up as shown below. Select on the HS-7238 button to launch
the installation program.
2. Click on the VGA Driver button to continue.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click on the Windows 9x button to continue.
4. When the dialog box below appears, make sure you close all
other Windows applications then click on the Next > button to
proceed.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
5. The Intel OEM Software License Agreement dialog box then
appears on the screen. Choose Yes to proceed.
6. Once the setup program finishes copying files into your system, it
will prompt you to restart the computer. Tick on the Yes, I want
to restart my computer now followed by a click on the Finish
button to reboot. Only after your computer boots will the new
settings take effect.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2.2 Win NT
NOTE: Please make sure you have already installed Service Pack 6.0.
1. Insert Utility CD Disk into your CD ROM drive. The main menu will
pop up as shown below. Select on the HS-7238 button to launch
the installation program.
2. Click on the VGA Driver button to continue.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click on the Windows NT button to continue.
4. When the dialog box below appears, make sure you close all
other Windows applications then click on the Next > button to
proceed.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
5. The Intel OEM Software License Agreement dialog box then
appears on the screen. Choose Yes to proceed.
6. Once the setup program finishes copying files into your system, it
will prompt you to restart the computer. Tick on the Yes, I want
to restart my computer now followed by a click on the Finish
button to reboot. Only after your computer boots will the new
settings take effect.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2.3 Win 2000
1. Insert Utility CD Disk into your CD ROM drive. The main menu will
pop up as shown below. Select on the HS-7238 button to launch
the installation program.
2. Click on the VGA Driver button to continue.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click on the Windows 2K button to continue.
4. When the dialog box below appears, make sure you close all
other Windows applications then click on the Next > button to
proceed.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
5. The Intel OEM Software License Agreement dialog box then
appears on the screen. Choose Yes to proceed.
6. Once the setup program finishes copying files into your system, it
will prompt you to restart the computer. Tick on the Yes, I want
to restart my computer now followed by a click on the Finish
button to reboot. Only after your computer boots will the new
settings take effect.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3 LAN Driver Installation
5.3.1 Win 98
1. Insert Utility CD Disk into your CD ROM drive. The main menu will
pop up as shown below. Select on the HS-7238 button to launch
the installation program.
2. Click on the LAN Driver button to continue.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click on the Windows 9x button to continue.
4. When the dialog box below appears, make sure you close all
other Windows applications then click on the Next > button to
proceed.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
5. The Intel OEM Software License Agreement dialog box then
appears on the screen. Choose Accept to proceed.
6. The Setup Type dialog box then appears on the screen. Choose
Typical to proceed.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
7. When the dialog box below appears, make sure you close all
other Windows applications then click on the Install button to
proceed.
8. When the dialog box below appears, it means your driver is install
completed. Click Finish button to proceed.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Once the setup program finishes copying files into your system, it
will prompt you to restart the computer. Tick on the Yes to
reboot. Only after your computer boots will the new settings take
effect.
5.3.2 Win NT
NOTE: Please make sure you have already installed Service Pack 6.0.
1. The system automatically detects the absence of Windows NT
Networking. Click on the Yes button to start installation.
2. Tick on the Wired to Network once the following screen
appears. Click on the Next to proceed.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click on the Start Search button for the program to locate the
Network Adapter.
4. Once setup finishes the search, it will list a number of adapters
for you to choose from. Press on the Have Disk button to assign
the driver path location.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Setup now asks you for the location of the driver. When you have
entered the new driver path, press on the OK button to continue.
6. When Setup finds the information it needs about the new driver,
it will display the device it found on the following screen. If using
82551 or 82562, please choose “Intel(R) PRO/100 Family
Adapter”. If using 82540EM, please choose “Intel(R)
PRO/1000 Family Adapter”. Press on the OK button to accept
and proceed.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Setup then returns to Network Setup Wizard screen and displays
your new Network Adapter. Click on Next to continue.
8. The Network Setup Wizard then allows you to set the Network
Protocols on your network. Select the appropriate protocol and
then click on Next to continue.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Before Setup starts installing the components found and the
settings you made, it will give you the option to proceed or go
back for changes from the following screen. Click on the Next
button once you are sure of your devices.
10. Windows NT Setup will then need to copy files necessary to
update the system information. Specify the path then press
Continue.
11. When Setup asks if you wish to change the TCP/IP settings of
your system, select them appropriately. The default choice is No.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Setup then starts the Networking installation and copies the files.
13. When the screen below appears, click on Next to continue.
14. Setup then prompts you that it is ready to start the network. You
may complete the installation thereafter. Click on Next to
continue.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
15. Assign the workgroup or domain setting of your computer. Click
on Next to continue.
16. Click on the Yes button to restart your computer. The LAN1
driver installation for WIN NT4.0 is now complete.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
17. With the Utility CD Disk still in your CD ROM drive, we can install
LAN2. Right click on “Network Neighborhood” icon from the
desktop. Select on Properties and then proceed to the Network
from the main menu. Click on Add to continue.
18. Setup then returns to Network Setup Wizard screen and displays
your new Network Adapter. Click on OK to continue.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
19. Click on the Close button. The LAN2 driver installation for WIN
NT4.0 is now complete.
5.4 Audio Driver Installation
1. Insert Utility CD Disk into your CD ROM drive. The main menu will
pop up as shown below. Select on the HS-7238 button to launch
the installation program.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Click on the AUDIO Driver button to continue.
3. When the dialog box below appears, make sure you close all
other Windows applications then click on the Next > button to
proceed.
4. Once the InstallShield Wizard completes the operation and
update of your AC’97 driver, it will ask you to remove disks from
their drives, and prompt you to restart your system. Tick on the
Yes, I want to restart my computer now. Afterwards, click on the
Finish button to complete the installation process. The system
changes you made will take effect after the system restarts.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5 USB2.0 Driver Installation
5.5.1 Win 98
1. With the Utility CD Disk still in your CD ROM drive, right click on
“My Computer” icon from the Windows menu. Select on System
Properties and then proceed to the Device Manager from the
main menu.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select on Other Devices from the list of devices then double-click
on PCI Universal Serial Bus.
3. The PCI Universal Serial Bus Properties screen then appears,
allowing you to re-install the driver. Select Driver from the main
menu to proceed.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
4. When the dialog box below appears, make sure you close all
other Windows applications then click on the Next > button to
proceed.
5. Tick on the “Search for a better driver” once the following screen
appears. Click on the Next to proceed.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Once the program returns to the Add New Hardware Wizard
screen, your specified location will appear. Press on the Next
button to continue
7. When Setup finds the information it needs about the new driver,
it will display the device it found on the following screen. Press on
the Next button to accept and proceed.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Once the InstallShield Wizard completes the operation and
update of your USB2.0 driver. Click on the Finish button to
complete the installation process.
5.5.2 Win 2000
1. With the Utility CD Disk still in your CD ROM drive, right click on
“My Computer” icon from the Windows menu. Select on System
Properties and then proceed to the Device Manager from the
main menu.
2. Select on Other Devices from the list of devices then double-click
on PCI Universal Serial Bus.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
3. The PCI Universal Serial Bus Properties screen then appears,
allowing you to re-install the driver. Select Driver from the main
menu to proceed.
4. When the dialog box below appears, make sure you close all
other Windows applications then click on the Next > button to
proceed.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Tick on the “Search for a suitable driver” once the following
screen appears. Click on the Next to proceed.
6. Once the program returns to the Add New Hardware Wizard
screen, your specified location will appear. Press on the Next
button to continue
77
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Choose sisusb2.inf and press on the Open button to accept and
proceed.
8. Once the InstallShield Wizard completes the operation and
update of your USB2.0 driver. Click on the Finish button to
complete the installation process.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5.3 Win XP
1. Insert Utility CD Disk into your CD ROM drive. The main menu will
pop up as shown below. Select on the HS-7238 button to launch
the installation program.
2. Click on the USB2.0 Driver button to continue.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Click on the Windows XP button to continue.
4. When the dialog box below appears, make sure you close all
other Windows applications then click on the Next > button to
proceed.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Once the InstallShield Wizard completes the operation and
update of your USB2.0 driver. Click on the Finish button to
complete the installation process.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
|