Customer Service Center
N53 W24700 South Corporate
Circle
Sussex, WI 53089
A Huffy Company
Universal Mounting Bracket
SAFETY
INSTRUCTIONS
The UNIVERSAL MOUNTING BRACKET is a versatile assembly
which allows you to mount your backboard to a pole, on a wall, or on
a flat roof or a slanted roof of any pitch. Although the shape of a
backboard may vary, it will not affect the installation procedure. Keep
in mind that the official height of a basketball goal is 10 feet from the
playing surface to the top of the goal rim.
WARNING: To ensure your safety, DO NOT attempt to
assemble this system without following the instructions
carefully. BEFORE BEGINNING ASSEMBLY READ THE
INSTRUCTIONS, AND IDENTIFY PARTS using the hardware
identifier and parts list in this document.
WARNING: Mounting the backboard is performed at an
elevated height, for your own safety, use a ladder. Two people
are required for this operation, one person should not attempt
this alone. Use proper precautions.
PARTS LIST
Item Qty.
Part No. Description
1
2
3
4
5
6
1
2
6
2
4
900099 Short Angle, Black
900814 Long Angle, Black
900815 Strap, Long
200580 Angle Bracket
204102 U-bolt, 3/8-16 x 4-1/4
203309 Flat Washer, .406 I.D. x 1.0
WARNING: This system is not designed to support a
player hanging from the goal or net. Failure to observe this
caution may cause bodily injury and/or property damage.
6
O.D.
7
4
203017 Hex Nut, 3/8-16
8
1 2
201107 Capscrew, Hex Head, 1/4-20
Because installation circumstances cannot be
IMPORTANT!!
x 1/2
9
1 0
1 1
1 2
predicted, anchoring and fastening hardware cannot be provided with
this kit to mount the UNIVERSAL MOUNTING BRACKET to your
particular wall or roof. Long wood screws are recommended for wood
and shingled walls and roofs. Expandable anchors are recommended
for cement or brick walls and roofs. Consult your local hardware store
for the appropriate anchoring and fastening hardware.
1 2
1 2
1
203326 Lock Washer, 1/4
203228 Hex Nut, 1/4-20
900104 Short Strap
4
203103 Carriage Bolt, 5/16-18 x 1-1/2
REQUIRED TOOLS AND
MATERIALS:
IMPORTANT!
We appreciate your purchasing one of our many fine
products. We are sure that you will be very satisfied with
your selection. Although great care and effort have been
taken, problems may occur. To ensure prompt and correct
handling of any problems, or to answer any questions, please
• Two of each: 3/4”, 7/16”, 1/2” and 9/16”
Wrenches
NOTICE TO ASSEMBLERS
ALL Huffy Sports basketball Systems, including those
used for DISPLAYS, MUST be assembled and
ballasted with sand or water according to
instructions. Failure to follow instructions could
result in SERIOUS INJURY. It is NOT acceptable to
The NBA and individual NBA member team identifications reproduced on this product are
trademarks and copyrighted designs, and/or other forms of intellectual property, that are the
exclusive property of NBA Properties, Inc. and the respective NBA member teams and may
not be used, in whole or in part, without the written consent of NBA Properties, Inc.
02/02
P/N 201008
printed on recycled
1
© COPYRIGHT 2002 by HUFFY SPORTS
Download from Www.Somanuals.com. All Manuals Search And Download.
POLE/WALL MOUNT FOR FAN OR RECTANGULAR MOLDED PLASTIC BACKBOARDS
IMPORTANT! Finger tighten nuts and bolts until bracket is completely assembled.
1. Assemble short angles to long angle as shown.
2. Assemble short angles. Assemble bolts as shown.
3. Assemble bracket with brace. Fully tighten all nuts and bolts after assembly.
4. Install angle brackets as shown.
5. IMPORTANT! Hardware supplied is designed for a 3 1/2” diameter pole. Consumers
must provide necessary hardware for poles of other sizes.
Assemble U-Bolts to brackets loosely. Tighten when desired goal height is reached.
Official NBA goal height is 10 feet (3.05m).
6. Mount bracket to wall, then install backboard.
7. Mount to roof.
1.
ASSEMBLE
1
10
9
2
8
2.
10
1
9
8
02/02
P/N 201008
printed on recycled
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLE COMPONENTS (continued)
8
3.
9
8
10
4
9
10
3
8
9
10
4.
4
10
8
9
10
9
4
8
P/N 201008
02/02
printed on recycled
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
POLE
5
13
6
7
6
12
7
IMPORTANT!
For spring loaded
rim assembly, re fe r
to instructions
i n cluded with rim
02/02
P/N 201008
printed on recycled
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
WALL MOUNT
NOTE:
Hardware for
mounting the brackets
to the wall is not
13
12
IMPORTANT!
For spring loaded
rim assembly, re fe r
to instructions
i n cluded with rim
P/N 201008
02/02
printed on recycled
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ROOF MOUNT
7.
Top View
10
8
12
4
8
10
13
9
Do not use
washers here
on spring return
style rims.
4
6
13
IMPORTANT!
For spring loaded
rim assembly, re fe r
to instructions
10
9
i n cluded with rim
NOTE:
4
Hardware for
mounting the brackets
to the roof is not
8
02/02
P/N 201008
printed on recycled
7
Download from Www.Somanuals.com. All Manuals Search And Download.
POLE/WALL MOUNT FOR STEEL FRAME ACRYLIC BACKBOARDS
IMPORTANT! Finger tighten nuts and bolts until bracket is completely assembled.
1. Assemble angle bracket assembly. Assemble bolts as shown.
2. Assemble angle bracket assembly. Assemble bolts as shown.
3. Assemble brackets with brace. Fully tighten all nuts and bolts after assembly.
4. IMPORTANT! Hardware supplied is designed for a 3 1/2” diameter pole. Consumers must
provide necessary hardware for poles of other sizes.
Assemble U-Bolts to brackets loosely. Tighten when desired goal height is reached. Official
NBA goal height is 10 feet (3.05m).
5. Mount bracket to wall, then install backboard.
6. Mount to roof.
1.
2.
ASSEMBLE
1
10
9
10
9
8
8
3.
8
9
10
ASSEMBLE
COMPONENTS
11
P/N 201008
02/02
printed on recycled
8
Download from Www.Somanuals.com. All Manuals Search And Download.
POLE, ROOF, OR WALL MOUNT
POLE
FRONT VIEW
4.
10
9
8
8
8
9
10
10
WALL MOUNT
5.
Do not use
washers here
on spring return
style rims.
IMPORTANT!
For spring loaded
rim assembly, re fe r
to instructions
i n cluded with rim
02/02
P/N 201008
printed on recycled
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ROOF MOUNT
Top View
6.
10
8
10
9
8
Do not use
washers here
on spring return
style rims.
4
6
13
IMPORTANT!
For spring loaded
rim assembly, re fe r
to instructions
10
9
i n cluded with rim
4
NOTE:
Hardware for
mounting the brackets
to the roof is not
8
P/N 201008
02/02
printed on recycled
10
Download from Www.Somanuals.com. All Manuals Search And Download.
|