Huawei Network Router E960 User Manual

Step 5: Log in to the Wireless Gateway Web Management  
Status  
Description  
Status  
Description  
HUAWEI E960 HSDPA Wireless Gateway Quick Start  
1. Open the Internet Explorer, and then enter the default web address (192.168.1.1) of the E960  
in the address bar.  
2. In the WIRELESS GATEWAY LOGIN page, select the user type, enter the password, and  
Double blinking  
in green  
Searching the network or  
no network  
Blinking in  
blue  
Normal GPRS/EDGE  
network  
The HUAWEI E960 supports HSDPA/WCDMA 2100, GSM/GPRS/EDGE 1900/1800/900/850,  
and network auto-switch. With the E960, you can experience wireless gateway and USB modem  
at any time and any place.  
Steady on and  
in green  
GPRS/EDGE data service  
connected  
Fast blinking  
in green  
Downloading the  
upgrade mode  
then click  
.
2
Admin: Have the rights the view and modify  
the configurations, and the default password  
is admin;  
Blinking in blue  
Normal WCDMA network  
Indicator off  
Off  
E960 Appearance  
Steady on in  
blue  
WCDMA data service  
connected  
Steady on in  
cyan  
HSDPA data service  
connected  
WLAN  
Signal  
Power  
User: Only view the basic information, and  
the default password is user.  
3
Reset  
Ethernet  
Interface  
Phone  
y
Reset: Reset button. On the side of the E960. Press and hold it for more than five seconds to  
restore the factory defaults.  
Only one user can log in to the E960  
management page at one time, which is to  
prevent the configuration conflict.  
PC Configuration Requirements  
Power  
Mode  
ON/OFF  
The recommended PC configurations for using the E960 are as follows:  
y
Power Interface: When connected with the power adapter, the E960 functions as a wireless  
gateway. When connected to the PC with a USB data cable, the E960 functions as a USB  
modem.  
Ethernet: Insert a Ethernet cable connected to the PC or other network equipments.  
Phone: Insert a phone cable connected with a telephone to realize the voice service.  
Power: Power indicator. When it is in yellow, the charge is finished.  
y
y
y
y
y
y
y
CPU: Pentium 500 MHz or above  
Memory: 128 MB RAM or above  
Hard disk: 50 MB available space  
Operating System: Windows 2000, Windows XP, or Windows Vista  
LCD resolution: 800*600 or above, recommended 1024*768.  
Interface: standard USB interface  
4
3. If you are prompted to enter the PIN code, you need to enter the correct PIN code, and then  
click  
.
y
y
y
y
Note:  
y
If the correct PIN code or PUK code is invalid, you cannot use the network-related  
services.  
WLAN: WLAN indicator. If it is steady on and in yellow, the WLAN is enabled. If it is  
blinking, data is transmitting.  
Internet Explorer: IE6.0 or above, Firefox 1.5 or above, Netscape 8.0 or above  
Plug in the USB end of the power adapter to the power interface  
of the E960, and plug in the power plug to the power socket.  
Please use the E960 compatible power adapter; otherwise, the  
E960 can be damaged.  
y
y
Please consult your service provider about whether to use SIM/USIM card.  
Your service provider provides the SIM/USIM card. For more information about  
SIM/USIM card, please consult your service provider.  
Step 2: Install the  
Power Adapter  
Note: If the configurations of the PC are lower than the recommended, the performance of the  
E960 may be weakened.  
y
y
ON/ OFF: Press and hold  
to power on or off the E960.  
Signal: Signal strength indicator. The following table shows the status of the signal strength  
indicator:  
Status  
Description  
Status  
Description  
1
Fast blinking in  
red  
No SIM card or unverified  
PIN code  
Steady on in  
yellow  
Signal strength in level  
two or three (middle)  
Step 3: Connect  
to the PC  
The Ethernet cable cannot be longer than 100 meters. For better  
effect, please use the shielded cable.  
Step 1: Insert the SIM Card  
Steady on in red  
Signal strength in level  
one (weak)  
Steady on in  
green  
Signal strength in level  
four or five (strong)  
Insert the SIM card into the socket with  
the golden contact facing upward. Insert  
the card socket into the E960.  
y
Mode: The network mode indicator. The following table shows the status of the network mode  
indicator:  
Step 4: Connect  
to the Telephone  
The telephone cable cannot be longer than three meters, and the  
telephone can be connected with three extensions.  
Step 6: Making the First Call  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Haier Refrigerator DD300RW User Manual
Honeywell Switch NR Series User Manual
Honeywell Thermostat TL6120 User Manual
Hotpoint Dishwasher HDA1000 User Manual
Hotpoint Range RGA524EW User Manual
HP Hewlett Packard Power Supply 1U User Manual
Husqvarna Lawn Mower 16 H User Manual
Hypertec Mouse KEYB002HY User Manual
Hyundai Car Stereo System H CDM8022 User Manual
Impex Home Gym PWR SURGE User Manual