Hotpoint Cooktop GE760RX User Manual

Instructions for Installation and Use  
Gas Hob  
Model GF760RX  
Model GE760RX  
To the Installer  
Before installation fill in the product details on the back cover of this book.  
The information can be found on the rating plate.  
To the User  
You must read the instructions prior to installing and using the appliance and  
then retain them for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Your new hob is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been  
installed in accordance with the installation instructions detailed in this booklet.  
To help make best use of your cooking equipment, please read this booklet carefully.  
The hob is designed specifically for domestic use and responsibility will not be accepted for use in any other installation.  
*The guarantee is subject to the provisions that the appliance:  
(a) Has been used solely in accordance with this booklet.  
(b) Has been properly connected to a suitable supply voltage as stated on the rating plate, attached to the  
appliance.  
(c) Has not been subjected to misuse or accident or been modified or repaired by any person other than the  
manufacturers authorised employee or agent.  
(d) Has been correctly installed.  
This appliance conforms with the following European Economic Community directives:  
-
-
-
-
-
73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications;  
89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications;  
90/396/EEC of 29/06/90 (Gas) and subsequent modifications;  
93/68/EEC of 22/07/93 and subsequent modifications.  
2002/96/EC  
The European Directive 2002/96/EC onWaste Electrical and Electronic Equipment (WEEE), requires that old household  
electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must  
be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the  
impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of  
your obligation, that when you dispose of the appliance it must be separately collected.  
Consumers should contact their local authority or retailer for information concerning the correct disposal of their old  
appliance.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Congratualtions on choosing an Hotpoint appliance, which you will find is dependable and easy to use.We recommend  
that you read this manual for best performance and to extend the life of your appliance.Thank you.  
Close-up View  
F
D
A
A
B
B
C
C
A Gas Burners  
F Safety Device - Activates if the flame accidentally goes  
out (spills, drafts, etc.), interrupting the delivery of gas  
to the burner.  
B Support Grid for Cookware  
C Control Knobs for Gas Burners  
D Ignitor for Gas Burners  
How To UseYour Appliance  
To light the selected burner,first press the corresponding  
knob down fully, turn it anti-clockwise to the high flame  
symbol, and keep the knob pressed down until the burner  
ignites for approximately 3-4 seconds to allow the safety  
device "F", which keeps the flame lit automatically, to  
heat up.  
To turn off a burner, turn the knob clockwise until it stops  
(it should be on the “•” setting).  
Caution: If the burner accidently goes out, turn off the gas  
on the control knob and wait at least 1 minute before you  
try to to light it again.  
The position of the corresponding gas burner or electric  
hot plate (if present) is indicated on each control knob.  
Gas Burners  
The burners differ in size and power. Choose the most  
appropriate one for the diameter of the cookware being  
used.  
The burner can be regulated with the corresonding control  
knob by using one of the following settings:  
Off  
High  
Low  
To turn on one of the burners, place a lighted match or  
lighter near the burner, press the knob all the way in and  
turn it anti-clockwise to the "High" setting.  
On those models fitted with a safety device (F), the  
knob must be pressed in for about 4 seconds until the  
device that keeps the flame lit warms up.  
The section entitled, "Practical Cooking Advice", provides  
information on the recommended settings for various types  
of food or cooking processes.When the knob is on any of  
the settings other than "Off", the operating light comes  
on.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to KeepYour Cooktop in Shape  
Before cleaning on your appliance, disconnect it from the  
Stainless steel can be stained if it remains in contact  
electrical power supply.  
with highly calcareous water or aggressive detergents  
(containing phosphorous) for an extended period of time.  
It is recommended that these parts be rinsed thoroughly  
with water and then dried well. It is also a good idea to  
clean up any spills.  
To extend the life of the hob, it is vital that it be cleaned  
carefully and thoroughly on a frequent basis, keeping  
in mind the following:  
·
·
Do not use steam equipment to clean the appliance.  
Remove any liquid from the lid before opening it.  
The enameled parts and the glass top, if present, must  
be washed with warm water without using abrasive  
powders or corrosive substances which could ruin them;  
The removable parts of the burners should be washed  
frequently with warm water and soap, making sure to  
remove caked-on substances;  
On cooktops with automatic ignition, the end of the  
electronic ignition device must be cleaned carefully and  
frequently, making sure that the gas holes are not  
clogged;  
Greasing theTaps  
The taps may jam in time or they may become difficult to  
turn. If so, the tap itself must be replaced.  
N.B.:This operation must be performed by a technician  
authorised by the manufacturer.  
Practical Advice  
Practical Advise on Using the Burners  
For best performance, follow these general guidelines:  
Use the appropriate cookware for each burner (see  
table) in order to prevent the flame from reaching the  
sides of the pot or pan;  
Alwasy use cookware with a flat bottom and keep the  
lid on;  
When the contents come to a boil, turn the knob to  
"Low".  
Burner  
ø Cookware diameter (cm)  
Fast (R)  
24 - 26  
16 - 20  
10 - 14  
24 - 26  
16 - 20  
Semi Fast (S)  
Auxiliary (A)  
Triple Crown (TC)  
Fishburner (SP)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Is there a problem?  
The burner does not remain on when set to "Low".  
Check to make sure that:  
It may occur that the hob does not function or does not  
function properly. Before calling customer service for  
assistance, lets see what can be done.  
First of all, check to see that there are no interruptions in  
the gas and electrical supplies, and, in particular, that the  
gas valves for the mains are open.  
The gas holes are not clogged.  
There are no draughts near the cooking surface.  
The minimum has been adjusted correctly (see the  
section entitled, "Minimum Regulation").  
The cookware is not stable.  
Check to make sure that:  
The burner does not light or the flame is not uniform  
around the burner.  
The bottom of the cookware is perfectly flat.  
The cookware is centered correctly on the burner or  
electric hot plate.  
Check to make sure that:  
The gas holes on the burner are not clogged;  
All of the movable parts that make up the burner are  
mounted correctly;  
The support grids have not been inverted.  
If, despite all of these checks, the cooktop does not function  
properly and problem persists, call the nearest INDESIT  
Company Customer Service Centre, informing them of:  
- The type of problem.  
- The abbreviation used to identify the model (Mod. ...) as  
indicated on the warranty.  
Never call upon technicians not authorized by the  
manufacturer, and refuse to accept spare parts that are  
not genuine.  
There are no draughts around the cooking surface.  
The flame does not stay lighted on the model with  
the safety device.  
Check to make sure that:  
You press the knob all the way in;  
You keep the knob pressed in long enough to activate  
the safety device.  
The gas holes are not clogged in the area corresponding  
to the safety device.  
Safety Is a Good Habit to Get Into  
To maintain the EFFICIENCY and SAFETY of this appliance, we recommend:  
call only the Service Centers authorized by the manufacturer  
always use original Spare Parts  
This manual is for a class 3 built-in cooktop.  
This appliance is designed for non-professional use in  
the home and its features and technical characteristics  
must not be modified.  
These instructions are only valid for the countries the  
symbols for which appear on the manual and the serial  
plate.  
The electrical system of this appliance is safe only  
when it is correctly connected to an adequate earthing  
system, as required by current safety standards.  
-
-
-
-
-
Exposure to atmospheric agents (rain, sun);  
Using flammable liquids nearby;  
Using adaptors, multiple outlet plugs and/or extensions;  
Using unstable or deformed cookware;  
Leaving the electric hobs on without cookware on top  
of them;  
Closing the glass top (if present) while the gas burners  
or electrical hot plates are still hot;  
Trying to install or repair the appliance without the  
assistance of qualified personnel.  
-
-
Prevent children and the disabled from coming into  
contact or having access to the following, as they are  
possible sources of danger:  
The assistance of qualified personnel must be called  
upon in the following cases:  
-
Installation (in accordance with the manufacturer's  
instructions);  
-
-
-
The controls and the appliance in general;  
The packaging (plastic bags, polystyrene, nails, etc.);  
The appliance, during and immediately after use given  
the heat generated by its use;  
-
-
When in doubt about the operation of the appliance;  
Replacement of the electrical outlet becuase it is  
incompatible with the plug.  
-
The appliance when no longer installed (in this case,  
all potentially dangerous parts must be made safe).  
Contact service centers authorized by the  
manufacturer in the following cases:  
The following should be avoided:  
-
When in doubt about the condition of the appliance after  
having removed the packing;  
-
-
-
Touching the appliance with wet parts of the body;  
Using the appliance with bare feet;  
Pulling on the appliance or the power supply cord to  
disconnect them from the electrical outlet;  
Improper and/or dangerous use;  
Obstructing the ventilation or heat dissipation slots;  
Allowing the power supply cord of small appliances to  
come into contact with the hot parts of the cooktop;  
-
-
Damage to or replacement of the power supply cord;  
In the case of a breakdown or malfunction: ask for  
original spare parts.  
-
-
-
It is recommended that you follow the guidelines  
below:  
-
Only use the appliance to cook food, avoiding all other  
uses;  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
-
-
Always check to make sure that the control knobs are  
on the “•”/”o” setting when the appliance is not in use;  
Cut the power supply cord after disconnecting it from  
the electrical mains when you decide to no longer use  
the appliance.  
The manufacturer will not be held liable for any damages  
arising out of : incorrect installation or improper,  
incorrect or unreasonable use..  
-
-
Check the condition of the appliance after it has been  
unpacked;  
Disconnect the appliance from the power supply in the  
event of malfunction and always before cleaning or  
maintenance;  
-
When not in use, disconnect the appliance from the  
power supply and turn off the gas valve (if present);  
Installation  
Detail A  
Adjacent  
Room  
Room to be  
Vented  
The following instructions are directed at the qualified  
installer so that the installation and maintenance  
proceedures may be followed in the most professional and  
expert manner possible.Important:Unplug the electrical  
connection before performing any maintenance or  
regulation upkeep work.  
Positioning for gas hob  
A
Important: this unit may be installed and used only in  
permanently ventilated rooms according to the British  
Stancards Codes Of Practice: B.S. 6172 / B.S. 5440, Par.  
2 and B.S. 6891 Current Editions. The following  
requirements must be observed:  
Examples of ventilation holes  
for comburant air.  
Enlarging the ventilation slot  
between window and floor.  
Fig. A  
Fig. B  
c) Intensive and prolonged use of the appliance may neces-  
sitate supplemental ventilation, e.g. opening a window or  
increasing the power of the air intake system (if present).  
a) The room must be fitted with a ventilation system which  
vents smoke and gases from combustion to the outside.  
This must be done by means of a hood or electric ventilator  
that turns on automatically each time the hood is operated.  
d) Liquidified petroleum gases are heavier than air and, as a  
result, settle downwards. Rooms in which LPG tanks are  
installed must be fitted with ventilation openings to the  
outside in order to allow the gas to escape in the event of  
a leak.Therefore, LPG tanks, whether empty or partially  
full, must not be installed or stored in rooms or spaces  
below ground level (cellars, ect.). It is also a good idea to  
keep only the tank currently being used in the room, making  
sure that it is not near sources of heat (ovens, fireplaces,  
stoves, etc.) that could raise the internal temperature of  
the tank above 50°C.  
Installation of built-in stove tops  
The appliance can be installed next to furniture units which  
are no taller than the top of the cooker hob. The wall in  
direct contact with the back panel of the cooker must be  
made of non-flammable material. During operation the back  
panel of the cooker could reach a temperature of 50°C  
above room temperature. For proper installation of the  
cooker, the following precautions must be taken:  
a) The hob may be located in a kitchen, a kitonen/diner or  
bed sitting room, but not in a bathroom or shower room.  
b) The furniture standing next to the unit, that is higher  
than the working boards, must be placed at least 600  
mm from the edge of the board.  
In a chimney stack or branched flue.  
(exclusively for cooking appliances)  
Directly to the Outside  
b) The room must also allow for the influx of the air needed  
for proper combustion. The flow of air for combustion  
purposes must not be less than 2 m3/h per kW of installed  
capacity.The supply of said air can be effected by means  
of direct influx from the outside through a duct with a  
inner cross section of at least 100 cm² which must not be  
able to be accidentally blocked.Those appliances which  
are not fitted with a safety device to prevent the flame  
from accidentally going out must have a ventilation  
opening twice the size otherwise required, i.e. a minimum  
of 200cm2 (Fig. A). Otherwise, the room can be vented  
indirectly through adjacent rooms fitted with ventilation  
ducts to the outside as described above, as long as the  
adjacent rooms are not shared areas, bedrooms or present  
the risk of fire (Fig. B).  
c) The cabinets should be positioned next to the hood at  
a height of at least 420 mm (Fig. C).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
g) In the event the hob is not installed above a built-in  
oven, a wood panel must be inserted as insulation.This  
panel must be placed at least 20 mm from the bottom  
of the cooktop itself.  
600mm min.  
Important: When installing the hob above a built-in oven,  
the oven should be placed on two wooden strips; in the  
case of a joining cabinet surface, remember to leave a  
space of at least 45 x 560 mm at the back.  
Fig. C  
d) Should the hob be installed directly under a cupboard,  
the letter should be at least 700mm (millimetres) from  
the worktop, as shown in Fig. C.  
560 mm.  
e) The dimensions of the room for the furniture must be  
those indicated in the figures in the last two pages of  
the cover.Fixing hooks are provided which allow to place  
the hob plate on work tops that measure from 20 to 40  
mm in thickness (see Fig.D).To obtain a good fixing of  
the hob plate it is advisable to use all the hooks  
supplied.  
Gas connection for gas hob  
The cooker should be connected to the gas-supply by a  
corgi registered installer. During installation of this product  
it is essential to fit an approved gas tap to isolate the  
supply from the appliance for the convenience of any  
subsequent removal or servicing. Connection of the  
appliance to the gas mains or liquid gas must be carried  
out according to the prescribed regulation in force, and  
only after it is ascertained that it is adaptable to the type  
of gas to be used. If not, follow the instructions indicated  
in the paragraph headed “Adaptation to different gas types”.  
In the case of connection to liquid gas, by tank, use  
pressure regulators that conform to the regulation in force.  
Important: For safety, for the correct regulation of gas  
use and long life of the appliance, ensure that the gas  
pressure conforms to the indications given in table 1  
“Nozzle and burner characteristics”.  
55 mm  
555 mm  
Fig. D  
Connection to non-flexible tube  
(copper or steel)  
Connection to the gas source must be done in such a way  
as to not create any stress points at any part of the  
appliance.  
The appliance is fitted with an adjustable, "L" shaped connector  
and a gasket for the attachment to the gas supply. Should  
this connector have to be turned, the gasket must be replaced  
(supplied with the appliance).  
Hook position for  
H=30mm top  
Hook position for  
H=40mm top  
Front  
The feeding connector of the gas to the appliance is a  
threaded 1/2 gas male cylinder.  
Connection to flexible steel tube  
The gas feed connector to the appliance is a threaded,  
male 1/2" connector for round gas pipe. Only use pipes  
and sealing gaskets that conform to the standards currently  
in force. The maximum length of the flexible pipes must  
not exceed 2000 mm. Once the connection has been made,  
ensure that the flexible metal tube does not touch any  
moving parts and is not crushed.  
Hook position for  
Back  
Check the Seal  
H=20mm top  
Once the appliance has been installed, make sure all the  
connections are properly sealed, using a soapy water solution.  
Never use a flame.  
N.B: Use the hook contained in the "accessories set"  
f) The hob can only be installed above built-in ovens  
provided with cooling ventilation.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adapting the hob for DifferentTypes of Gas  
either on the side of the top or inside the shaft) clockwise  
until the flame becomes small but regular.  
N.B.: In the case of liquid gas, the regulation screw must be  
fully screwed in (clockwise).  
To adapt the hob to a different type of gas than that for which  
it was designed, (see the sticker under the hob or on the  
packaging), the burner nozzles must be changed, as follows:  
Remove the pan supports and slide the burners out of the  
Make sure that, when the knob is turned rapidly from high  
cooktop.  
to low, the flame does not go out.  
Unscrew the nozzles using a 7mm socket wrench and  
replace them with those for the new type of gas. (See  
table 1, “Burner and Nozzle Specifications”).  
In the event of a malfunction on appliances with the  
security device (thermocouple) when the gas supply is  
set at minimum, increase the minimum supply levels using  
the regulator screw.  
Reassemble the parts following the instructions in reverse  
Once the adjustment has been made, apply sealing wax, or  
a suitable substitute, to the old seals on the by-pass.  
order.  
On completing the operation, replace the old rating label  
with the one showing the new type of gas; the sticker is  
available from our Service Centre.  
If the gas pressure is different than that prescribed, a pressure  
regulator must be installed at the source, in compliance with  
national standards governing the use of piped gas regulators.  
Regulation of Air Supply to the Burner  
The burners do not need a primary air regulator.  
Minimum Regulation  
Turn the gas valve to minimum.  
Remove the knob and turn the regulator screw (positioned  
Characteristic of the burners and nozzles  
Table 1  
Burner  
Liquid Gas  
Nozzle  
Natural Gas  
Nozzle Flow*  
Diameter Thermal power  
By-Pass  
1/100  
Flow*  
g/h  
(mm)  
kW (p.c.s.*)  
1/100  
1/100  
l/h  
Nomin. Ridot.  
(mm)  
(mm)  
***  
**  
(mm)  
Fast (R)  
100  
75  
3,00  
1,90  
1,00  
2,50  
0,70  
0,40  
0,40  
0,80  
41  
30  
30  
48  
86  
70  
50  
83  
218  
138  
73  
214  
136  
71  
116  
106  
79  
286  
181  
95  
Semi Fast (S)  
Auxiliary (A)  
Triple Crown (TC)  
55  
100  
182  
179  
124  
238  
Nominal (mbar)  
Minimum (mbar)  
Maximum (mbar)  
28-30  
20  
35  
37  
25  
45  
20  
17  
25  
Supply  
Pressures  
*
At 15°C and 1013 mbar-dry gas  
**  
***  
Propane P.C.S. = 50.37 MJ/kg.  
Butane P.C.S. = 49.47 MJ/kg.  
Natural P.C.S. = 37.78 MJ/m3  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical Connection  
Powersupplyvoltageandfrequency:230-240Va.c.50Hz.  
Disposing of the plug:  
Note: the supply cable must be positioned so that it never reaches  
atanypointatemperature5Chigherthantheroomtemperature.  
The cable must be routed away from the rear vents. Should you  
require it, you may use a longer cable, however, you must ensure  
that the cable supplied with the appliance is replaced by one of the  
same specifications in accordance with current standards and  
legislation.  
Your appliance is supplied with a 13 amp fused plug that can be  
plugged into a 13 amp socket for immediate use. Before using the  
appliancepleasereadtheinstructionsbelow.  
Ensure that before disposing of the plug itself, you make the pins  
unusable so that it cannot be accidentally inserted into a socket.  
Instructions for connecting cable to an alternative plug:  
Important:thewiresinthemainsleadarecolouredinaccordance  
withthefollowingcode:  
Green&Yellow  
Blue  
Brown  
-Earth  
-Neutral  
- Live  
If the colours of the wires in the mains lead do not correspond with  
thecolouredmarkingsidentifyingtheterminalsinyourplug,proceed  
as follows:  
ConnectGreen&YellowwiretoterminalmarkedEor orcoloured  
GreenorGreen&Yellow.  
ConnectBrownwiretoterminalmarkedLorcolouredRed.  
ConnectBluewiretoterminalmarkedNorcolouredBlack.  
If a 13 amp plug (BS 1363) is used it must be fitted with a 13 amp  
fuse. A 15 amp plug must be protected by a 15 amp fuse, either in  
theplugoradaptororatthedistributionboard.Ifyouareinanydoubt  
about the electrical supply to your machine, consult a qualified  
electricianbeforeuse.  
WARNING-THISAPPLIANCEMUSTBEEARTHED.  
THEFOLLOWINGOPERATIONSSHOULDBECARRIEDOUT  
BYAQUALIFIEDELECTRICIAN.  
Replacingthefuse:  
Whenreplacingafaultyfuse, a13ampASTAapprovedfusetoBS  
1362shouldalwaysbeused,andthefusecoverre-fitted.Ifthefuse  
cover is lost, the plug must not be used until a replacement is  
obtained.  
Replacementfusecovers:  
If a replacement fuse cover is fitted, it must be of the correct colour  
asindicatedbythecolouredmarkingorthecolourthatisembossed  
in words on the base of the plug. Replacements can be obtained  
directly from your nearest Service Depot.  
Howtoconnectanalternativeplug:  
The wires in this mains lead are coloured in accordance with the  
followingcode:  
BLUE  
BROWN  
GREENANDYELLOW  
NEUTRAL”(“N)  
LIVE”(“L”)  
EARTH(E”)  
Removingtheplug:  
Ifyourappliancehasanon-rewireablemouldedplugandyoushould  
wish to remove it to add a cable extension or to re-route the mains  
cable through partitions, units etc., please ensure that either:  
GREEN &  
YELLOW  
theplugisreplacedbyafused13ampre-wireableplugbearing  
the BSI mark of approval.  
13 amp fuse  
BROWN  
BLUE  
or:  
CROSS-BAR  
CORD GRIP  
the mains cable is wired directly into a 13 amp cable outlet,  
controlled by a switch, (in compliance with BS 5733) which is  
accessible without moving the appliance.  
Please note: for appliances with a rating greater than 13 amp (eg:  
electric hob, double ovens and freestanding electric cookers etc.)  
the mains cable must be wired into a cooker output point with a  
rating of 45 amp. In this case the cable is not supplied.  
Disposingoftheappliance  
Whendisposingoftheappliancepleaseremovetheplugbycutting  
themainscableascloseaspossibletotheplugbodyanddispose  
of it as described above.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After Sales Service  
"No company is better positioned to offer an after sales service on a  
Hotpoint appliance than us - the manufacturer"  
As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts  
and labour guarantee for the first 12 months. In addition to this you also have the advantage of free  
replacement parts for the first 5 years when fitted by a Hotpoint  
engineer. When the 12 months parts and labour guarantee expires we offer the following after sales  
service options:  
Repair Service and Information Help Desk  
UK: 08709 066066  
Republic of Ireland: 1850 302 200  
Note: Our operators will require the Model number and the Serial number of your appliance  
Available 364 days a year with a fast, effective and value for money service. We have the largest white  
goods repair service in the UK with over 1200 of our own fully trained engineers. All repairs include a  
parts and labour guarantee for 12 months from the date of the repair.  
If you require any information or have any questions about your appliance, our operators are on hand with  
help and advice.  
All this ensures that you will receive the best available after sales service possible.  
Extended Warranties  
UK: 08709 088 088  
Republic of Ireland: 1850 502 200  
Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service cover  
plans to give you total peace of mind.  
l Repair Protection Plan  
-
FREE service repairs for a single Hotpoint appliance during the period  
of cover.  
l Kitchen Cover  
-
FREE service repairs for all your Hotpoint appliances less than 8  
years old.  
Genuine Parts and AccessoriesUK: 08709 077 077  
Republic of Ireland: (01) 842 6836  
A wide range of genuine parts and accessories are available from our hotline or through our web site.  
Genuine parts and accessories, extended warranties and service repairs are all  
available on our web-site at:  
GB  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guarantee  
"Satisfaction guaranteed or your money back"  
We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have  
purchased your Hotpoint appliance. If there is a technical problem simply call our Hotpoint Repair  
engineer to call. If the technical problem is not resolved under this guarantee, we will replace your  
machine or, if you prefer, give you your money back.  
All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free  
replacement parts for the first 5 years provided that they are fitted by a Hotpoint engineer.  
Guarantee terms and conditions  
Your guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to the  
following provisions that your appliance:  
l
l
Has been installed and used correctly in accordance with this instruction booklet.  
Has been used solely for domestic purposes and is located on domestic premises (ie. not for  
commercial or trade use).  
l
l
Has been properly connected to a suitable electrical supply voltage as stated on the appliance  
rating plate.  
Has not been subject to misuse, accident, modified or repaired by anyone other than one of our  
own service engineers.  
For pre purchase information on any other Hotpoint product call: 08701 50 60 70  
Recycling & Disposal Information  
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right to  
use quality recycled components to keep down customer costs and minimise material wastage.  
Please dispose of packaging and old appliances carefully.  
To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with the  
appliance. Dispose of these parts separately to ensure that the appliance can no longer be plugged  
into a mains socket, and the door cannot be locked shut.  
GB  
Download from Www.Somanuals.com.1A2ll Manuals Search And Download.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key Contacts  
After Sales Service  
Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in  
both the appliances and services we offer.  
Repair Service and Information Desk  
UK: 08709 066 066  
(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)  
Republic of Ireland: 1850 302 200  
Note: Our operators will require the following information:  
Model number:  
Serial number:  
Extended Warranties  
UK: 08709 088 088  
(Open 8 to 8 Mon - Sun)  
Republic of Ireland: 1850 502 200  
Genuine Parts and Accessories  
UK: 08709 077 077  
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)  
Republic of Ireland: (01) 842 6836  
Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB.  
10/2005 - 195043661.02  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Biscuit Joiner G0725 User Manual
Hamilton Beach Oven 31195 User Manual
Hamilton Beach Toaster 22811 User Manual
Harbor Freight Tools Cordless Saw 04095 User Manual
Harbor Freight Tools Kitchen Utensil 45006 User Manual
Harmar Mobility Mobility Aid AL055 User Manual
Hasbro Robotics 83529 User Manual
HTC Lawn Mower LZ30 968999776 User Manual
IBM Computer Hardware CI5VGM Series User Manual
Image Hot Tub IMSB53950 User Manual