Total Connect Online Help Guide for:
iP Cameras
POWER
NETWORK
iPCAM-WI Camera
iPCAM-PT Pan and Tilt Camera
800-02577-iPcams 2/10 Rev. A
Download from Www.Somanuals.com. All Manuals Search And Download.
iP Cameras Online Help Guide
This guide covers the operation of Honeywell's iP Cameras for use with the Total Connect website. The various cameras
each have different features that can be controlled from the Total Connect website. When a particular camera is
selected, only the operating switches for that model camera will appear. Refer to the topics at the end of this
guide for details on the tool buttons and how to set your preferences for each camera. The table below highlights the
features of each internet camera model:
Camera
Features
iPCAM-WI Camera
• Wired or Wireless
• Fixed Lens
POWER
NETWORK
• Video Motion Detection
iPCAM-PT Camera
• Wired or Wireless
• Fixed Lens
• Pan and Tilt with presets
• Aux Lighting
• Video Motion Detection
After logging into Total Connect, click Video.
1
Note: After approximately
30-minutes of inactivity, the
Video session will time out
and disconnect.
From the drop-down menu, choose the video system you want to view. Click Launch Video System.
2
If your PC does not have QuickTime® and Flash® You will be prompted to install or update these
applications.
– 1 –
Download from Www.Somanuals.com. All Manuals Search And Download.
iP Cameras Online Help Guide
On the right, thumbnail still pictures for each camera will appear. These thumbnails are updated
every 10 to 20 seconds. You may select a camera to view its live video by clicking on that camera.
The live video appears on the left.
3
Set the default camera
by checking this box.
If you set a default
camera, its live video will
automatically appear on
the left the next time
you launch the video
system.
You may use the arrow buttons to position a PT (pan & tilt) camera. Use single clicks and allow
time for the camera to attain the new position. Use the center Home button to command the
camera to its home position (refer to the detailed description in the "Tool Buttons" topic).
4
Use the Enlarge
button to bring up
a larger dedicated
viewing window.
– 2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
iP Cameras Online Help Guide
This dedicated camera viewing window provides a larger live video view. The tool buttons available
will depend on the iP camera model.
5
For a detailed description of each button's function, refer to the "Tool Buttons" topic that follows.
When your session is over, in the video monitoring window click Close then log out of Total Connect.
6
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
iP Cameras Online Help Guide
Tool buttons
Button
Function
How the camera's "Home" position is determined.
• If no video detection areas have been set up, the camera's home position is centered in its
vertical and horizontal axis.
• If a video detection area has been set up, that view now becomes the home position.
• When a camera has been moved to other than the home position, after 5 minutes of no
movement the camera will always return to the home position.
arrow buttons – Click to incrementally position the camera in a vertical or horizontal direction.
preset buttons 1, 2, 3, 4 – These buttons are used to quickly drive the camera to a preset
watch area. (Up to 4 preset watch areas can be set.) Just "single-click" the button to go to the
preset watch area.
To set a preset watch area, use the arrow buttons to drive the camera to the desired area.
Then press and hold the desired 1, 2, 3, or 4 button for about 3-seconds. A checkmark will
briefly appear to confirm the preset is saved.
center home button – Click to drive the camera to its home position.
movie camera – Used to manually capture video clips. When clicked, a 10 second video clip is
captured, based on the pre-capture and post-capture settings stored in the camera. The video
clip will be stored as an event, and may trigger an email notification if desired. (Refer to the
"Edit camera settings" topic.)
Note, if a scheduled period has been setup for video motion detection, this feature is restricted
to the scheduled period. If no schedule has be setup, there is no restriction (operates 24/7).
still camera – Used to manually capture still pictures. You will be prompted to save the picture
if desired.
light – Used to toggle on or off the camera's auxiliary lighting LEDs. Depending on the ambient
low light conditions, the auxiliary LED lighting can improve video quality up to 15 feet.
auto pan – Causes the camera to swing through its entire horizontal range. At the end of the
panning motion, the camera will return to the starting position. After 5 minutes of no movement
the camera will always return to the home position.
stop / play – When clicked, this button toggles between stopping and starting the live video
stream. When stopped, the video image is replaced by a blank screen.
Note, if you inadvertently click on the live video screen, the video may go blank. You can use
this button to restart the live video.
– 4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
iP Cameras Online Help Guide
Edit camera settings
Note, that the settings for each camera are configured separately.
On each camera preview window there is a tool icon in the lower right corner,
click this icon to bring up the camera's Camera Configuration window.
It is important to know that configuration settings are stored in the camera and
are retrieved when a video session is opened.
To understand the various configuration settings we will look at the settings for
cam3.
Refer to the table below and the screen shots that follow to understand how to
configure the camera's settings.
Group or Item
Function
Camera Name
You can edit the camera name. Up to 15 characters may be used. The new name will
appear when the next video session is initiated.
Display Date and
Time
This grouping allows you to set your date and time preferences.
Motion Detection
Check the "Motion Detection" box to enable video motion detection. Motion is determined
by comparing current and previous video frames.
Attachment Type – If you want an email notification, choose between sending a Video
Clip or Snapshot attachment. Note, this choice also determines what will be stored in the
Event History. If no choice is made, a Video Clip will be stored in the Event History.
Pre-Capture and Post Capture Length – These two settings determine the beginning
and end of the 10 second period that is captured when motion is detected. For video a 10
second clip is captured, and for snapshots a series of 10 are captured.
Interval – Choose from 1 to 15 minutes before the next video motion can be captured.
This setting helps reduce excessive notifications.
Edit Detection Areas – This opens a new window to allow setting up to 4 detection
areas where the Activity Threshold can be adjusted.
Events
This grouping enables you to set which Triggers will be used to cause certain actions. Un-
available settings are grayed out.
Triggers can be from an Input, PIR or Motion. One or more may be selected.
• Input – Triggered by the security system's control panel. Such a trigger may come
from a door opening, safe opening, etc. (This Feature is Reserved for Future Use.)
• PIR – Triggered by the camera's PIR sensor. (This Feature is Reserved for Future Use.)
• Motion – Triggered by video motion.
A triggered input can cause the following Actions. One or more may be selected.
• Capture – The video or snap shot is stored in the Event History and can send an email
notification if desired.
• Output Port – Connector port on the camera can be used to turn on light or
sounder, etc. (This Feature is Reserved for Future Use.)
• White Light LED – The camera's white light LEDs turn on for the 10 second video
motion capture period.
Edit Schedule – Opens up a new window to allow setting schedules that define when a
motion event can be detected.
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
iP Cameras Online Help Guide
Group or Item
Function
Features
Pan/Tilt Speed – Allows choosing the camera panning speed. Note, a slower speed will
give clearer video.
Status LED Operation – Uncheck this box to turn off the camera's status LEDs for
stealth operation. Although the camera will appear as not operating, all functions are
working.
Video Adjustments This grouping allows the camera to be optimized for the particular viewing area. Note, for
cameras that are ceiling mounted, check the Ceiling Mount box to invert the image.
Save
Click to save your camera settings. A confirmation message will appear.
Camera Configuration window
This is where you configure the camera.
Upon completion,
click the SAVE
button.
A confirmation
message appears.
– 6 –
Download from Www.Somanuals.com. All Manuals Search And Download.
iP Cameras Online Help Guide
Edit Detection Areas window
When an area is activated by checking the box, a transparent colored Detection Area will appear on the screen. You can
drag and resize the box as desired. Click Done when all the areas are configured.
Motion detected
in any area will
trigger a video
event and store
a video clip or
series of snap-
shots.
Edit Schedule window
This window allows you to setup schedules that define when a motion event can be detected. Schedules may be deleted
by clicking the "X" adjacent to the schedule.
After the camera's schedule
is set up, click DONE.
You will be returned to the
Camera Configuration window.
– 7 –
Download from Www.Somanuals.com. All Manuals Search And Download.
TRADEMARKS
Honeywell is a registered trademark of Honeywell International Inc.
Flash is a registered trademark of Adobe Systems Incorporated, registered in the U.S. and other
countries.
QuickTime is a registered trademark of Apple Inc., registered in the U.S. and other countries.
All other trademarks are the properties of their respective owners.
2 Corporate Center Drive, Suite 100
P.O. Box 9040
Melville, NY 11747
Copyright © 2010 Honeywell International Inc.
Ê800-02577-iPcamsŠ
800-02577-iPcams 2/10 Rev. A
Download from Www.Somanuals.com. All Manuals Search And Download.
|