Honeywell Clock TE218ELW User Manual

Introduction  
Thank you for selecting the Honeywell Wireless Indoor/  
Outdoor Thermometer with US Atomic Clock.  
This device includes precise time keeping, alarms and  
indoor/outdoor temperature monitoring features that you  
can enjoy from the comfort of your home.  
In this package you will find:  
• Main unit (receiver)  
• Remote sensor (transmitter) TS13  
Wireless Indoor/Outdoor  
Thermometer with  
US Atomic Clock  
Please keep this manual handy as you use your new  
item. It contains practical step-by-step instructions, as  
well as technical specifications and precautions you  
should know.  
G
F
A
C
E
B
(TE218ELW)  
USER MANUAL  
I
D
H
J
K
Download from Www.Somanuals.com. All Manuals Search And Download.  
A FOUR-LINE DISPLAY  
FEATURES  
MAIN UNIT  
Allows easy reading of the indoor or outdoor  
temperature and calendar clock  
* Precise Atomic time keeping with daily clock updates  
* Time display with hours, minutes and seconds  
* Calendar display with month and date  
* US time zone settings (Pacific, Mountain, Central  
& Eastern)  
B CHANNEL SELECTOR  
Selects different remote sensor readings  
C MEMORY [MEM] BUTTON  
* Radio - controlled signal reception indicator  
* User-Selectable 12/24 hour time format  
* Weekday displayed in 5 different languages  
– English, Spanish, French, German and Italian  
* User-Selectable temperature display in ˚C or ˚F  
* Indoor temperature display  
Recalls maximum or minimum temperature  
D MODE BUTTON  
Changes display modes and confirms setting  
E ALARM ON/OFF BUTTON  
* Remote temperature monitored from up to 3 locations via  
433 MHz frequency band (one remote sensor is included)  
* Wall mount or desktop option  
Selects an alarm time and sets an alarm status  
F SNOOZE/LIGHT BUTTON  
* Dual crescendo alarm with snooze  
* Programmable low-temperature pre-alarm warns about  
icy or inclement weather conditions prior to regular  
alarm time  
Activates the snooze and LCD backlight  
G WALL-MOUNT RECESSED HOLE  
Keeps the main unit on a wall  
* LCD with blue backlight  
H UP (  
) BUTTON  
Outdoor Temperature Display  
Remote  
Outdoor Temperature Trend  
Increases the setting  
Reception Icon  
Channel  
Number  
I
DOWN (  
) BUTTON  
CH  
CH  
Decreases the setting  
Indoor  
Temperature  
Trend  
J BATTERY COMPARTMENTS  
Accommodates two UM-3 or “AA” size 1.5V  
alkaline batteries  
Time Zone  
Display  
IN  
IN  
Indoor  
Temperature  
Display  
Radio  
AM  
PM  
Reception Icon  
Weekday  
Display  
K REMOVABLE TABLE STAND  
Time  
PRE-AL  
w
M
D
Pre-Alarm  
AM  
Holds unit in upright position on a flat surface  
w
Indicator  
Battery Low  
s
Indicator  
Single Alarm Indicator  
Date Display  
Weekday Alarm Time  
Month Display  
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE TEMPERATURE SENSOR  
* Remote temperature transmission to the main unit  
via 433MHz signal.  
BEFORE YOU BEGIN  
1. We recommend using alkaline batteries for main unit and  
remote sensor.  
* Case can be wall mounted using built-in hanger  
* 100 feet transmission range without interference  
* LCD display of measured temperature  
* Temperature display unit (˚C or ˚F) selection  
* Transmission channel selection  
2. Avoid using rechargeable batteries .  
3. Insert batteries before first use, matching the polarity as  
shown in the battery compartment.  
4. Always insert batteries in the remote sensor first.  
5. Press RESET after each battery change, using a paper  
clip or similar tool.  
6. During the initial setup, place the main unit as close as  
possible to the remote sensor.  
4
3
3
M
H
z
W
I
R
E
L
E
S
S
E
F
1
7. After reception is established, position the remote sensor and  
main unit within the effective transmission range of 100 feet.  
NOTE: 1.Avoid setting the time and date on the main unit  
before the remote temperature is displayed.  
2. The effective operating range may be influenced  
by the surrounding building materials and how  
the receiver and transmitter are positioned.  
3.Place the remote sensor so that it faces the main  
unit (receiver), minimizing obstructions such  
as doors, walls and furniture.  
A
1
2
3
CHANNEL  
RESET  
˚C/˚F  
C
D
B
THERMO  
SENSOR  
4.Though the remote sensors are weather resistant,  
they should be placed outdoors away from direct  
sunlight, rain or snow.  
A LED INDICATOR  
Flashes once when the remote sensor transmits a reading  
Flashes twice when battery power is low  
BATTERY INSTALLATION  
TEMPERATURE SENSOR  
B BATTERY COMPARTMENT  
NOTE: Install the batteries; select the channel and  
temperature unit (˚C/˚F) before you mount the remote sensor.  
1. Remove the screws in the battery compartment with a  
small Phillips screwdriver.  
Accommodates two AA-size batteries  
C RESET  
Resets all previous settings  
2. Select the channel. The switch is located in the battery  
compartment. Channel 1 is typically selected if only  
1 remote is being used.  
D CHANNEL SELECTOR  
Selects the desired channel before installing batteries  
3. If you are using more than one sensor, select a  
different channel for each sensor.  
E WALL-MOUNT RECESSED HOLE  
Keeps remote sensor on the wall.  
4. Install 2 “AA” size batteries (not included) matching  
to the polarities shown in the battery compartment.  
5. Replace the battery compartment door and secure the screws.  
6. Secure the remote sensor in the desired location.  
F ˚C/˚F SWITCH  
Selects the temperature display in Fahrenheit or Celsius  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Always place main unit by the window for better reception.  
If in 8 minutes the WWVB time signal has not been  
received, use the MODE button to set the time manually  
(see "setting the time and date manually" section.)  
The clock will continue to search for the WWVB time  
signal daily from 1:00am to 4:30am. If reception is  
successful, the time and date will be updated automatically.  
6. You may activate the WWVB receiver at any time by  
pressing and holding the button for 3 seconds in the  
Hour/Minute/Second display.  
BATTERY INSTALLATION  
MAIN UNIT  
The Wireless Indoor/Outdoor Thermometer main unit  
uses 2 “AA” batteries (not included). When the LCD  
becomes dim or the respective low battery indicator  
shows up on the indoor or remote temperature display,  
the battery replacement is required. To install or replace  
the batteries, please follow these steps:  
1. Remove the battery compartment door on the back of  
the main unit.  
2. Insert 2 “AA” size batteries (not included) matching  
the polarities shown.  
FUNCTION KEYS  
Your Wireless Forecaster has 6 easy - to - use function  
keys that control its operation:  
Use the MODE button:  
3. Replace the battery compartment door.  
HOW TO USE THE TABLE STAND OR  
WALL MOUNTING  
*
*
To set the time manually  
To view the calendar  
The main unit has a removable table stand, that supports  
it on a flat surface. The unit can also be mounted on  
the wall using the recessed screw hole. The stand must be  
removed prior to mounting. The remote sensor can be  
similarly mounted or placed on a flat surface.  
Use the button:  
*
To increase the hour, minute, year, month and date  
* To select 12/24 hour format  
* To select temperature display unit (ºC or ºF )  
* To select the weekday language  
GETTING STARTED  
*
*
To select the time zone  
1. After the batteries are installed, remote sensor will  
transmit the temperature readings at adout 45 second  
intervals.  
To activate reception of the WWVB signal  
Use the button:  
* To decrease the hour, minute, year, month and date  
* To select 12/24 hour format  
2. The main unit may take up 2 minutes to receive the  
initial readings.  
* To select temperature display unit (ºC or ºF )  
* To select the weekday language  
* To search for the remote sensor signal  
3. Upon successful reception, the remote temperature will  
be displayed under the top line of the main unit LCD  
display, and the indoor temperature will be displayed  
below the remote one.  
Use the CHANNEL button:  
* To view the reading of different remote sensor(s)  
4. The main unit will automatically update readings at  
45-second intervals.  
Use the MEM button:  
5. After the main unit finishes searching for the temperature  
signal from the remote unit(s), the WWVB time signal  
receiver will start searching for the atomic time signal.  
It takes about 5-8 minutes.  
* To view the maximum or the minimum indoor or remote  
temperature  
*
To clear the previous temperature records  
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
LANGUAGE SETTING  
Use the ALARM ON/OFF button:  
The weekday may be displayed in one of five languages:  
English, Spanish, French, German, or Italian  
1. After the minute is set, press MODE, and the weekday  
display will indicate the current preset language, “EN”  
for English.  
*
*
*
To view the weekday alarm, single alarm or the pre-alarm.  
To set the alarm times.  
To turn off any alarm.  
CALENDAR CLOCK DISPLAY MODES  
Both an alarm time and the calendar share the same  
section of the LCD display. The next line displays the current  
time with seconds and the day of the week. The calendar is  
displayed in the month and day format. If the alarm time is  
displayed, press MODE to display the calendar in month-day  
format. Each press on the MODE button will change the  
display between the time with the seconds and the time with  
the day of the week.  
2. Press or to set the desired language for the weekday  
display. The selection sequence is “EN” for English, “SP”  
for Spanish, “FR” for French, “GE” for German, and “IT”  
for Italian.  
˚C or ˚F TEMPERATURE DISPLAY SELECTION  
1. When the language of weekday is set, press MODE.  
2. “˚F” will flash prompting the Fahrenheit display.  
3. Press or to select desired temperature display: “˚F”  
for Fahrenheit or “˚C” for Celsius.  
DATE AND TIME SETTING  
1. Press MODE button to change  
to the Hour/ Minute/ Weekday display. Select the Time  
Zone by pressing and holding the button for 3 seconds.  
Keep holding until the desired time zone (Pacific, Mountain,  
Central or Eastern) is displayed. A dark section on the  
map indicates the time zone selected.  
EXIT THE MANUAL SETTING MODES  
* When the temperature display is set, press MODE to return  
to the default hours, minutes and seconds display.  
* If no key is pressed for 30 seconds, the unit will return to  
default time display.  
2. Press and hold MODE for 3 seconds: The year digit will  
flash. Press or to select the year.  
VIEWING THE ALARM TIME SETTINGS  
There are 3 different alarms available: Weekday alarm, Single  
alarm and the Pre-alarm.  
3. Press MODE again: The month digit will flash.  
Press or to select the month.  
4. Press MODE again: The date digit will flash.  
* Weekday Alarm  
Press  
or to select the date.  
The alarm will sound and alarm icon “  
set time, Monday through Friday.  
* Single Alarm  
” will flash at the  
W
5. Press MODE again: The “12 Hr” digit will flash to  
prompt for 12 or 24 hour display format. Press or  
to select 12 or 24 Hr.  
The alarm will sound and the alarm icon “  
” will flash at  
S
the set time. Once it is finished, it will be disabled automatically.  
This is useful for weekends, holidays or any day when you wish  
to wake at a time other than your normal weekday alarm time.  
There is no need to reset your regular alarm time. This alarm  
can be bypassed during the set up if you choose not to use it.  
6. Press MODE again: The hour digit will flash.  
Press  
or to select the hour.  
7. Press MODE again: The minute digit will flash.  
Press or to select the minute.  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
* Pre-Alarm  
1. Press to view the previous single alarm time and arm  
the alarm.  
If the remote temperature (channel 1) is 32˚F or below,  
the pre-alarm feature will be activated. The pre-alarm  
time interval can be set for 15, 30, 45, 60, 75 or 90  
minutes before the weekday or single alarm time.  
This alarm will only sound if either the weekday or single  
alarms are armed. It may warn you about the lower  
temperature weather conditions and wake you up earlier in  
case of a potential ice or snow. This alarm can be bypassed  
during the set up if you choose not to use it.  
2. Press to disarm the single alarm and “OFF” will be  
displayed.  
3. When the single alarm time is displayed, press and hold  
ALARM ON/OFF for 3 seconds;  
4. The alarm hour digit will flash, then press or to adjust  
the desired hour.  
5. Press ALARM ON/OFF again, the alarm minute digit  
will flash, then press or to adjust the desired minute.  
6. Press ALARM ON/OFF again and the single alarm is  
If the calendar is displayed, pressing ALARM ON/OFF will  
display the weekday alarm. Each press on ALARM ON/OFF  
button will display the next available alarm in the sequence of  
Weekday alarm, Single alarm and Pre-alarm.  
set with the icon “  
” on the display.  
S
PRE-ALARM SETTING  
Press MODE to return to the calendar display.  
Press ALARM ON/OFF to select the pre-alarm time. If the  
alarm is disarmed, the alarm time will be displayed as “OFF”.  
The pre-alarm can be set only if the weekday alarm or the  
single alarm is set. If you choose not to set the PR E -AL AR M  
press ALARM ON/OFF again to exit the setting procedure.  
WEEKDAY ALARM SETTING  
1. Press to view the previous weekday alarm time and arm  
the alarm.  
1. Press  
the alarm.  
2. Press  
to view the previous pre-alarm time and arm  
2. Press to disarm the weekday alarm and have the  
display read “OFF”.  
to disarm the pre-alarm time and have the display  
3. When the weekday alarm time is displayed, press and hold  
ALARM ON/OFF for 3 seconds;  
read “OFF”.  
3. When the pre-alarm time is displayed, press and hold  
ALARM ON/OFF for 3 seconds;  
4. The alarm hour digit will flash, then press or to adjust  
the desired hour.  
4. The minute digit will flash, then press or to adjust  
the desired pre-alarm period in the sequence of 15, 30, 45,  
60, 75, 90 minutes.  
5. Press ALARM ON/OFF again, the alarm minute digit  
will flash, then press or to adjust the desired minute.  
6. Press ALARM ON/OFF again and the weekday alarm is  
5. Press ALARM ON/OFF again and the pre-alarm is set  
with the icon “PRE-AL” on the display.  
set with the icon “  
” on the display.  
W
SINGLE ALARM SETTING  
USING THE ALARM AND SNOOZE  
Press ALARM ON/OFF to select the single alarm. If the  
alarm is disarmed, the alarm time will be displayed as “OFF”.  
If you choose not to set the SINGLE ALARM press  
ALARM ON/OFF again to advance to the PRE-ALARM  
setting procedure.  
When the alarm sounds, press the LIGHT/SNOOZE key  
to temporarily stop the alarm. After depressing LIGHT/  
SNOOZE, the alarm sound will resume in 5 minutes. If the  
alarm is not disabled after that, it will sound for 4 more  
minutes and then will stop by itself.  
Press ALARM ON/OFF to disable any alarm.  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. On the main unit select the same channel number that  
set on the remote sensor. Outdoor temperature on the  
display will show that transmission is being received  
successfully.  
Note: When the temperature falls below the freezing point  
the batteries in the remote sensor(s) will freeze  
lowering their voltage output and effective range.  
During prolonged periods of extreme cold it is  
advisable to bring the remote sensor indoors, if  
alkaline batteries are being used. We recommend to  
use lithium ion batteries at temperatures below 32˚F.  
DISABLING ATOMIC TIME  
SIGNAL RECEPTION  
The main unit can be set manually to disable the daily  
reception of the WWVB time signal.  
Press and hold the and buttons at the same time for  
3 seconds and the radio reception icon will disappear.  
To enable WWVB receiver, press and hold the and  
buttons at the same time for 3 seconds again. The radio  
reception icon will flash. The main unit will start to  
search for the WWVB time signal immediately.  
LOST COMMUNICATION  
If the main unit display for the remote sensor goes blank,  
press and hold for 3 seconds to begin a new signal  
search. If the signal still isn't received, please make sure  
that:  
TRANSMISSION COLLISION  
Signals from other household devices, such as door bells,  
home security systems and entry controls, may interfere  
with this product and cause temporary reception failure.  
This is normal and does not affect the general performance  
of the product. The transmission and reception of the  
temperature readings will resume once the interference ends.  
1. The remote sensor is in its proper location.  
2. The distance between the main and remote units is not  
over 100 feet.  
3. The path between units is clear of obstacles.  
Shorten the distance between units if necessary.  
4. Fresh batteries are installed correctly in both remote  
sensor and main unit.  
CHECKING REMOTE AND  
INDOOR TEMPERATURE  
The indoor temperature is shown on the second line of the  
main unit display. The remote temperature is shown on  
the top line of the display. The wave icon near the remote  
temperature reading indicates that there is a good  
reception from the remote sensor. If there is no signals  
received from the remote unit for more than 2 minutes, a  
If it does not work, please perform the following steps:  
1. Bring the main unit and remote sensor close together.  
2. Remove 4 small screws from the back of the remote  
sensor and open the battery compartment.  
3. Remove the batteries from the battery compartment and  
reinstall them in the same manner. Remote sensor LED  
indicator will flash showing transmission of the signal.  
4. Remove the batteries from the main unit and reinstall  
them in the same manner.  
dashes “  
” will be displayed.  
Press and hold button for 2 seconds to activate an  
immediate signal search.  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TEMPERATURE TREND  
WWVB RADIO CONTROLLED TIME  
The trend indicator shows the trend of temperatures collected  
at a particular remote sight. There are three trends will be  
shown: Rising, Steady, and Falling.  
The NIST (National Institute of Standards and Technology)  
radio station is located in Ft. Collins, Colorado.  
It transmits the exact time signal continuously throughout  
the continental United States at 60KHz. Wireless Indoor/  
Outdoor Thermometer can receive this WWVB signal  
through its internal antenna from the distance up to 2,000  
miles away. Due to the nature of the Earth’s ionosphere,  
reception can be limited during the daytime. The radio control  
clock will search for a signal every night when reception is  
best. The WWVB radio station receives its signal from the  
NIST Atomic clock in Boulder, Colorado.  
Arrow  
Indicator  
Temperature  
Rising  
Steady  
Falling  
The WWVB tower icon on the main unit's display will flash  
indicating radio signal reception from the WWVB radio  
station. When the time signal is received, the WWVB tower  
icon turns on and the time of the selected time zone will be  
displayed. If only the part of the WWVB tower icon turns  
on or the WWVB tower does not appear at all and the time  
is not set, please consider the following:  
MAXIMUM AND MINIMUM TEMPERATURE  
The maximum and minimum records of the indoor and  
remote temperature will be automatically stored in the  
memory.  
The main unit will display the minimum, maximum and  
the current reading upon each press of the MEM button.  
If the MEM button is not pressed, the unit will return to the  
current temperature display in 15 seconds.  
*
Make sure the main unit is positioned at 8 feet distance  
from any interference source such as a TV, computer  
monitors, microwave ovens, etc  
To clear the memory, press and hold MEM for 3 seconds.  
The maximum and minimum readings will be erased.  
*
Within concrete rooms (basements, superstructures, office  
buildings), the received signal will be weakened, and the  
main unit should be placed close to a window.  
READING THE KINETIC WAVE DISPLAY  
The kinetic wave display shows the signal receiving status  
of the main unit. There are three possible forms:  
* The successful reception of the atomic time signal depends  
on the positioning and location of the main unit. Always  
place the main unit by the window for better reception.  
*
During the night time, the atmospheric disturbances are  
usually less severe and reception may be improved.  
A single daily reception is sufficient enough to keep the  
accuracy reading within 1 second.  
The Unit is in searching mode  
Temperature readings are  
securely registered  
Note: In case the radio-controlled clock is not able to detect  
the WWVB signal (due to disturbances, transmitting  
distance, etc), the time can be manually set and will  
be maintained accurately until a signal is available.  
˚F  
No signals.  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Temperature Measurement  
Main unit  
CARE OF YOUR WIRELESS INDOOR/OUTDOOR  
THERMOMETER WITH US ATOMIC CLOCK  
This product is engineered to give you years of satisfactory  
service if you handle it carefully. Here are a few precautions:  
1. Do not immerse the units in water.  
Indoor Temperature  
Proposed operating range  
: -5°C to +50°C /  
23°F to 122°F  
: 0.1°C/ 0.2°F  
2. Do not use any corrosive cleanser or chemical solution  
on the units. They may scratch the plastic parts and corrode  
the electronic circuit.  
Temperature resolution  
Remote Sensor  
3. Do not subject the units to excessive force, shock, dust,  
temperature or humidity, which may result in malfunction,  
shorter electronic life span, damaged batteries and distorted  
parts.  
Proposed operating range  
with alkaline batteries  
Proposed operating range  
with lithium batteries  
Temperature resolution  
: -20°C to + 70°C /  
-4°F to 158°F  
: -38°F to + 158°F /  
(-38.8˚C to 70˚C)  
: 0.1°C/ 0.2°F  
4. Do not tamper with the units internal components. Doing  
so will invalidate the warranty on the units and may cause  
unnecessary damage. The units contain no user-  
serviceable parts.  
RF Transmission Frequency  
Maximum number of Remote sensors  
RF Transmission Range  
: 433 MHz  
: 3  
5. Only use fresh batteries as specified in the user’s manual.  
Do not mix new and old batteries as the old ones may leak.  
Always replace both batteries at the same time.  
6. Always read the user’s manual thoroughly before  
operating the units.  
: Maximum 100 feet  
: approximately  
45 seconds  
Temperature sampling cycle  
Calendar and Clock  
7. Replace the batteries promptly when necessary (display  
becomes dim) or store the batteries when not in use.  
8. A soft cloth or paper towel may be used to clean your units.  
9. Keep the units clean and dry to avoid any problems.  
12/24 hour display in hh : mm format  
Date Format: Month – Day format  
Day of week: User- selectable in 5 languages  
(English, Spanish, French, German, Italian)  
Dual 4-minute crescendo alarm with snooze  
Pre-alarm for ice alert with programmable time intervals  
Blue Backlight  
Power  
Main unit  
: 2 x UM-3/ AA (1.5V) batteries  
- alkaline are suggested (not included)  
Remote Sensor : 2 x UM-3/ AA (1.5V) batteries  
- alkaline are suggested (not included)  
16  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DECLARATION OF CONFORMITY  
FCC STATEMENT  
This device complies with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions: (1) This device may  
not cause harmful interference, and (2) This device must accept  
any interference received, including interference that may cause  
undesired operation.  
We  
Name: Hideki Electronics, Inc.  
Address: 7865 SW Mohawk, Tualatin, OR 97062  
Telephone No.: 1-503-612-8395  
Warning: Changes or modifications to this unit not expressly  
approved by the party responsible for compliance  
declare that the product  
could void the user’s authority to operate the  
Produce No.: TE218ELW  
equipment.  
Product Name: Wireless Indoor/ Outdoor Thermometer  
with Atomic Clock  
NOTE: This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications.  
Manufacturer: Hideki Electronics Ltd.  
Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk  
Road, Kwai Chung, New Territories, Hong Kong  
is in conformity with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
1. This device may not cause harmful interference.  
2. This device must accept any interference received,  
including interference that may cause undesired  
operation.  
However, there is no guarantee that interference will not occur  
in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician  
for help.  
The information above is not to be used as contact for  
support or sales. Please call our customer service hotline  
(refer to the Standard Warranty Information) for all  
inquiries instead.  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STANDARD WARRANTY INFORMATION  
This product is warranted from manufacturing defects  
for one year from date of retail purchase. It does not  
cover damages or wear resulting from accident, misuse,  
abuse, commercial use, or unauthorized adjustment  
and repair.  
Note that online product registration is required to ensure  
valid warranty protection.  
To register your product, go to our Company website at:  
Registration under the Customer Service menu.  
Should you require assistance with this product and its  
operation, please contact our  
Customer Service Hotline 1(866) 443 3543  
Please direct all returns to the place of the original  
purchase. Should this not be possible, contact Customer  
Service Hotline for assistance or to obtain a Return  
Merchandise Authorization (RMA). Returns without a  
return authorization will be refused. Please retain your  
original receipt as you may be asked to provide a copy  
for proof of purchase.  
Hideki Electronics, Inc. reserves the right to repair or  
replace the product at our option.  
Copyright (2005) Hideki Electronics Inc. All Rights  
Reserved. The Honeywell Trademark is used under  
license from Honeywell Intellectual Properties Inc.  
Honeywell International Inc. makes no representations  
or warranties with respect to this product.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Swimming Pool Vacuum H6441 User Manual
Grizzly Switch G8293 User Manual
Harbor Freight Tools Air Compressor 47407 User Manual
Honeywell Thermostat H8908B Humidistat User Manual
Hotpoint Range EG600X User Manual
HTC Telephone SMT5800 User Manual
Husky Pressure Washer 1650 PSL User Manual
Husqvarna Lawn Mower 532 42 57 62 User Manual
Ice O Matic Ice Maker EMF 1106 Series User Manual
iHome Clock Radio ZN90 User Manual