WATCH™
W8600A AIR
Indicator
INSTALLATION INSTRUCTIONS
APPLICATION
The W8600A is available for use with Honeywell media
or electronic air cleaners.
AM
Sy
st
em
He
at
Tue
ake
W
Room
Fa
n
DST
TM
Batter
Au
to
y
Air Cleaner
UV Air
T
reatment
Humidifier
H
o
n
e
y
w
e
ll.c
o
m
/y
o
u
rh
The W8600A function indicator panel has four liquid
crystal display (LCD) arrowheads that point to Battery, Air
Cleaner, UV Air Treatment, and Humidifier. (See Fig. 1.)
A blinking arrowhead indicates service is needed.
o
m
e
LCD
M14697
TM
Battery
Fig. 2. W8600A mounting location.
Air Cleaner
UV Air Treatment
Humidifier
Mounting
Honeywell.com/yourhome
FUNCTION
These mounting instructions assume that the W8600A is
mounted next to a T8600 Thermostat. When installing at
another location, modify the procedure to fit the
installation:
INDICATOR
PANEL
1. Remove the W8600A from the base.
2. Mark the holes for the mounting screws (provided)
using the base as a template. See Fig. 3.
3. Drill the holes.
4. Position the base over the holes and install the
screws.
5. Tighten the screws until the base is mounted firmly
on the wall.
6. Replace the W8600A onto the base.
RESET BUTTON
M14696
THERMOSTAT
W6800A BASE
WALLPLATE
Fig. 1. W8600A AIRWATCH™ Indicator features.
INSTALLATION
WIRING HOLE
M14695
MOUNTING HOLES (2)
Location
The W8600A is designed to blend with the latest T8600
family of Honeywell Chronotherm® IV Thermostats. The
W8600A can also be mounted at any other convenient
location in the living area of the home. See Fig. 2.
Fig. 3. Using base as mounting template.
® U.S. Registered Trademark
Copyright © 2000 Honeywell •
• All Rights Reserved
69- 1448
Download from Www.Somanuals.com. All Manuals Search And Download.
|