Harrier
48
CODE 481A
(Electric Start)
OWNER’S HANDBOOK
(English Version)
FROM SERIAL NO: 481A001001
Issue : 22.10.01
HANDBOOK: 481145 (Rev.1.)
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1.1 Main Features/Specifications
1.2 Contents
1.17 Maintenance Schedule
1.18 - 1.24 Mower Maintenance
1.18
1.18
1.18
1.19
1.19
1.20
1.20
1.20
1.21
1.21
1.21
1.22
1.22
1.23
1.23
1.24
1.25
- Engine
1.3 Introduction
- Throttle Cable Adjustment
- Carburettor Adjustments
- Oil Service
- Air Cleaner Service
- Spark Plug Service
- Keeping Engine Clean
- Grassbag
1.4 Warranty
1.5 - 1.8 Safety Precautions
1.8 Safety Symbols
1.8 Decal Symbols
- Deck Housing
- Securing Nuts and Bolts
- Clutch Cable Adjustment
- Lubrication
- Cutterblade Removal
- Cutterblade Assembly
- Cutterblade Sharpening
- Storage
1.9 Assembling the Mower
1.9
1.9
1.9
1.9
- Delivery Checklist
- Handlebar
- Adjust Handlebar Height
- Grassbag Attachment
1.10 Before Starting the Engine
- Battery Charging
1.10
1.10
1.10
1.10
- Prevent Engine Damage
- Oil Type
- Check Oil Level
- Fuel Type
1.26 - 1.27 Trouble Shooting
1.28 Declaration of Conformity
1.29 - 1.31 Parts List
1.11 - 1.14 Operating The Mower
1.11
1.11
- Controls
- Starting Step 1
1.32 Parts list Diagram
1.11
1.11
-
-
Step 2
Step 3
1.33 Customer Info/Notes
1.12
1.12
- Forward Travel
- Turning
1.12
- Stopping
1.12
- Slopes
1.13
- Height of Cut
1.13
1.13
- Before Mowing
- Grassbag
1.13
1.14
1.14
- Without Grass Collection
- Heavy Growth
- Friction Disc
1.14
1.15 - 1.16
1.16
- Non-Grassed Areas
- Lawn Care Calendar - Guide Only
- Lawn Stripes
1.3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing a Hayter mower. The following pages are designed to help you gain
safe and efficient service from your mower.
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives
essential information regarding mower safety, operation, maintenance and specifications. Read
and understand this handbook prior to operating your mower for the first time. Make sure you
are familiar with all the controls and points of regular maintenance. If you have any doubts,
consult your local Hayter authorised dealer who will be pleased to give you assistance.
IMPORTANT: This mower is designed solely for use in a domestic grass cutting
environment. Use in any other way is considered as contrary to the intended use. Compliance
with and strict adherence to the conditions of operation, service and repair as specified in this
handbook also constitute essential elements of the intended use.
This mower should be operated, serviced and repaired only by persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed in this handbook and all other generally recognised regulations on
safety must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve Hayter Limited of
liability for any resulting damage or injury.
Hayter mowers are robustly constructed and designed for efficient economical
performance under normal mowing conditions. Correct operation and maintenance will ensure
a long and satisfactory service life. Prior to despatch from our factory every effort is made to
ensure that your mower is delivered in perfect condition.
Throughout this handbook all references to left and right are as viewed from behind the han-
dlebar, in the direction of forward travel.
This handbook is based on information available at the time of publication.
HAYTER LIMITED reserve the right to amend product specifications without prior notification.
1.4
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
LIMITED WARRANTY
Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects
in material and workmanship under normal use and service for a period of three years from the
date of purchase. The manufacturer of the engines furnish their own warranty and services are
provided through their authorised network (Refer to "Engine Warranty Statement"). To qualify
for the full benefit of the warranty, the warranty registration card must be returned within 60 days
of purchase. Subject to the conditions and exclusions noted in this limited warranty, we shall at
our option, repair or replace any warranted part during the applicable period. If you are in doubt
or experience any difficulty, please consult a Hayter Authorised Service Dealer for clarification.
To qualify for the extended warranty (second and third year) of the three year limited warranty
the machine must have annual services carried out by an Authorised Hayter Service Dealer.
These chargeable services should be carried out within 12 and 24 months of the date of purchase.
Excluded from the extended warranty period are those items which are subject to normal wear
and tear e.g. tyres, wheels, cutterblades, cables, batteries and other consumable wearing parts.
All consumer machines which are fitted with a genuine Hayter friction disc as original
equipment before use, are covered by a Lifetime Warranty against the engine crankshaft
bending. Note: friction washers, blade brake units and other such devices are not applicable.
Only machines fitted with a genuine Hayter friction disc, which are used in accordance with the
recommended operating and maintenance procedures, are covered.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused or
used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does
not cover minor mechanical adjustments unless they are due to defective material or
workmanship. Consult the Owner’s Handbook or a Hayter Authorised Service Dealer for
assistance when making these adjustments.
A warranty period of 90 days applies to machines used for commercial purposes.
To make a warranty claim, return the unit to a Hayter authorised dealer along with proof of
purchase stating the machine serial number and date of purchase. The service receipt(s) or this
Owners Handbook with the 1st/2nd year service boxes fully completed, must be produced as
proof of entitlement to the extended warranty period. Subject to the conditions and exclusions in
this limited warranty, the authorised dealer will, at our option, repair or replace any warranted
part within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to
which you may be entitled and your statutory rights are not affected by this warranty. If you need
additional information concerning this written warranty, or assistance in obtaining services,
please write to : HAYTER LIMITED, Service Department, Spellbrook, Bishop’s Stortford,
Hertfordshire CM23 4BU
UK ONLY: Details of your local Hayter authorised dealer are contained in Yellow Pages or
contact:- Freephone 0800 616298.
1st Year
Service
Record
2nd Year
Service
Record
Date....................................................................
Signed................................................................
Date.............................................................
Signed..........................................................
1.5
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Safety Alert Symbol
This safety alert symbol indicates important safety messages. When
you see this symbol be alert to the possibility of injury. Carefully read
the following and inform others.
Your mower is perfectly safe if used correctly. Failure to observe the
following precautions may result in serious injury.
Training
Before using the mower read the owners handbook carefully. Pay par-
ticular attention to the safety precautions. Ensure that you are familiar
with the controls and the proper use of the equipment. Learn how to
stop the mower quickly in an emergency.
Never allow children or people unfamiliar with these instructions to
use the mower.
Never mow while people, especially children, or pets are nearby.
Keep in mind that the user is responsible for accidents or hazards
occurring to other people or their property.
Preparation
While mowing, always wear substantial footwear and long trousers.
Do not operate the equipment when barefoot or wearing sandals.
Thoroughly inspect the area where the mower is to be used and remove
all objects which may be thrown by the machine.
WARNING: Petrol is highly flammable.
- Store fuel in containers specifically designed for this purpose.
- Add fuel before starting the engine. Never remove the cap from the
fuel tank or add petrol while the engine is running or when the engine
is hot. Allow the engine to cool for at least two minutes before refu-
elling.
- Do not attempt to start the engine if petrol is spilled or a smell of
petrol is present. Move the mower away from the area of spillage
and avoid creating any source of ignition until petrol vapours have
dissipated.
1.6
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Preparation
- Always use fresh fuel. Stale fuel can block the carburettor and cause
leakage.
- Replace fuel tank and oil tank caps securely.
A damaged cutterblade or loose fixing bolt are major hazards. Before
use, always visually inspect the cutting mechanism to ensure that it is
in good condition. A damaged cutterblade must be replaced immedi-
ately with a genuine Hayter replacement part
Operation
Do not operate the engine in a confined space where exhaust fumes
(carbon monoxide) can collect. Refuel outdoors only and do not smoke
while refuelling.
Always pull the starter cord slowly until resistance is felt. Then pull
the cord rapidly to avoid kickback and prevent hand or arm injury.
Mow only in daylight or good artificial light.
Avoid using the mower on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Mow across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not mow excessively steep slopes of more than 20 degrees.
Use extreme caution when reversing or pulling the mower towards you.
Stop the engine before moving the mower across areas other than grass.
Never operate the mower unless the guards are securely in position and
in good condition.
Do not change the engine governor settings or overspeed the engine.
Disengage the rear roller drive clutch before starting the engine.
Start the engine carefully, with feet well away from the cutterblade.
1.7
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Operation
Do not tilt the mower when starting the engine.
Do not put hands or feet near or under rotating parts.
Never pick up or carry the mower while the engine is running.
Never lift the rear deflector while the engine is running.
Never touch the exhaust/exhaust guard or cooling fins when the engine
is hot.
Stop the engine and disconnect the spark plug lead:
- Before clearing blockages or unclogging the discharge chute.
- Before cleaning/checking or working on the mower.
- After striking a foreign object. Inspect the mower for damage and
ensure necessary repairs are made before re-starting.
- If the mower starts to vibrate abnormally (check immediately).
Stop the engine:
- Whenever you leave the mower.
- Before refuelling.
Maintenance & Storage
Keep all nuts, bolts and screws tight to ensure that the equipment is in
safe operating condition.
Frequently check fuel lines and fittings for cracks or leaks and replace
if necessary.
Never check for a spark when the spark plug is removed. (Use approved
tester)
Inspect the exhaust periodically and replace if worn or leaking.
Never crank the engine with the spark plug removed.
Never start the engine with the air-cleaner or air-cleaner cover
removed.
Never store the mower with petrol in the tank within an enclosed area
where fumes may reach an open flame or spark.
1.8
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Maintenance & Storage
Allow the engine to cool before storing in any enclosure. To reduce the
fire hazard, keep the engine and the surrounding deck area free of
grass, leaves, or excessive grease.
Check the rear deflector and grassbag frequently for wear or deterioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done outdoors and
when the engine is cool.
Wear strong work gloves when removing and reassembling the cut-
terblade.
Always replace worn or faulty parts with genuine Hayter parts.
Safety Symbols
Danger of being hit by thrown
objects.
Safety Alert - Be aware to the
possibility of injury.
Danger of severing toes or fin-
gers in cutting mechanism.
Carefully read the Owners
Handbook before using the
machine.
Stop engine and remove spark
plug lead before working on
the mower.
Keep bystanders at a safe
distance from the mower.
Decal Symbols
Engine Stop (Symbol)
Height of Cut Adjustment (Symbol)
Throttle Control (Symbols)
STOP
305113
CS198
1.9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING THE MOWER
Delivery Checklist
Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Engine Handbook.
2. Warranty Reg. Card.
3. Grassbag.
4. Charger
5. Ignition Key
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.
Handlebar
Unscrew the handlebar securing knobs sufficiently to allow the handle-
bar to pivot. Move the engine stop lever away from the engine to avoid
damage and unfold the handlebar to the operating position. Tighten both
handlebar knobs to secure the handlebar in position.
Take care to ensure that the control cables do not become snagged at
the pivot point.
Adjust Handlebar Height
Unscrew the two larger knobs at base of handlebar sufficiently to allow
it to be moved to the upper, middle or lower position. Ensure both
sides are set to the same height and secure in the required position.
Grassbag Attachment
Raise the rear deflector, lower the grassbag through the handlebar and
hook in position. Lower the deflector to rest on the grassbag
1.10
Download from Www.Somanuals.com. All Manuals Search And Download.
MOWER
BEFORE STARTING THE
Prevent Engine Damage
To prevent engine damage the engine is shipped without oil or
petrol. The engine must be filled with the correct grade of oil and
petrol before starting the engine.
Oil Type
Always use high quality detergent oil classified “For service SE, SF,
SG” SAE 30 oil. Never use additives with recommended oils.
SAE 10W-30 multigrade oil may be used, but this will result in higher
engine operating temperatures with consequential high oil consump-
tion. It is imperative that the oil level is checked more frequently if this
grade of oil is used in order to guard against serious engine damage.
To prolong the life of your engine it is important that the oil is changed
after the first 5 hours of use - refer to ‘Maintenance Schedule’.
Check Oil Level
0.15
Clean around the oil filler cap before removing. With the mower on a
level surface, unscrew and remove the oil filler - dipstick. Wipe oil
Litres
from it with a clean cloth. Screw the oil filler - dipstick back in place,
then unscrew and remove it to check the oil level.
The oil level is correct when it is at the full mark on the dipstick.
15C
DO NOT OVERFILL.
Fuel Type
Always use clean, fresh unleaded petrol. Purchase fuel in quantities
that can be used within 30 days. Never mix oil with petrol. For added
engine protection Briggs & Stratton recommend the use of their fuel
additive which is available from an authorised Briggs & Stratton ser-
vice dealer.
Fill to base of neck to allow for fuel expansion. Do not overfill the
fuel tank.
1.11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Controls
Operate all control levers several times and ensure that the cables
move freely. Check that the engine stop and ground drive clutch levers
return freely to their rest position when released.
Whilst operating the engine throttle mechanism slight resistance
should be felt when moving the lever to the ‘choke’ position.
Starting - Step 1
Move the throttle control lever to the ‘choke’ position before starting
a cold engine. Move the throttle control lever to the ‘fast’ position
before starting a warm engine.
Step 2
Using your left hand turn the ignition key clockwise and hold in posi-
tion to crank the engine. When the engine sarts release the key and set
the throttle to the fast position if initially in the choke position.
The engine stop lever must be held firmly against the handlebar to
start and keep the engine running. If the engine stop lever is
released the engine will stop.
CS075
IMPORTANT: PREVENT ENGINE DAMAGE: Do not use the
ignition key when the engine is running.
Note: If necessary the engine can be started manually with the use of
the engine start grip.
Step 3
Allow the engine to warm up and move the throttle lever to the ‘fast’
position after starting a cold engine.
To prevent damage never pull the engine start grip when the
engine is running.
1.12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Forward Travel
Hold the handlebar and operate the ground drive clutch lever to power
the mower in a forward direction.
When the ground drive clutch lever is disengaged the mower may be
pushed. This feature is useful when mowing in confined areas.
If the engine stop lever is released the engine will stop.
Turning
To make a wide turn steer the mower with the handlebar in the direc-
tion required.
To make a tight turn release the ground drive clutch lever, apply down-
ward pressure on the handlebar to raise the front wheels just above
ground level and steer in the required direction.
To prevent accidents do not raise the front of the mower exces-
sively when making a turn. Never raise the rear of the mower
when the engine is running.
Stopping
Release the ground drive clutch lever, reduce the throttle setting and
release the engine stop lever.
Emergency stop: Release both ground drive clutch lever and engine
stop lever together.
If the engine fails to stop, move the throttle lever to the ‘slow’ posi-
tion and disconnect the spark plug lead.
STOP
Slopes
To prevent engine damage do not use the mower on slopes greater
than 20 degrees.
1.13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Height of Cut
+
Move the height of cut lever sideways to disengage it from the locking
notch, then push forwards to lower or pull backwards to raise the height
of cut. Release the lever in the required position and ensure that it locks
firmly into one of the seven notch settings.
-
Always select a height of cut to suit operating conditions. Prevent
engine overloading and blockages by avoiding low cuts in long grass
conditions. Be prepared to make two cuts when the grass is long.
305113
Before Mowing
To prevent accidents thoroughly inspect the area and remove all
objects which when contacted by the mower cutterblade could
become dangerous projectiles. Inspect the area for hidden obstruc-
tions which when contacted by the cutterblade could risk health
and safety. Remember the location of these obstructions and
ensure that you mow around them.
Grassbag
Raise the rear deflector and lift the grassbag through the handlebar and
lower the rear deflector to rest against the rear of the mower.
To empty the grassbag, pour out the grass clippings and shake the
grassbag vigorously to clean the airways. Good grass collection
depends on good air flow through the grassbag. When collecting grass
clippings it is important that the grassbag is emptied regularly to pre-
vent blockages and engine overloading.
Without Grass Collection
Remove the grassbag and operate the mower with the rear deflector in
the closed position.
1.14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Heavy Growth
Areas of heavy growth should be mown without collecting the clip-
pings. If collection is required, first mow the area without the grass-
bag at the maximum height of cut setting. Allow the grass clippings to
dry out and then mow the area at the maximum height of cut setting
with the grassbag fitted. Reduce the height of cut and mow the area
again as necessary until the required finish is obtained.
305113
To prevent grass damage do not remove more than one third of grass
height in one cut.
Friction Disc
The cutterblade is driven by the engine via a friction disc to help pre-
vent damage occurring to the engine crankshaft and cutting mecha-
nism when a hidden obstruction or overload is encountered.
Always stop the engine when a hidden obstruction or excessive vibra-
tion is encountered. Disconnect the spark plug lead and examine the
cutting mechanism. ALWAYS replace a damaged cutterblade - refer to
“Maintenance”.
Non-Grassed Areas
When moving the mower across non-grassed areas, stop the engine
and set the mower to the maximum height of cut to protect the cutting
mechanism.
STOP
1.15
Download from Www.Somanuals.com. All Manuals Search And Download.
LAWN CARE CALENDAR
To be used as a guide only.
January
There is very little work to do this month apart from brushing away
leaves. Keep off the grass if frozen or waterlogged.
February
Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil
organisms and root growth and apply lawn sand if necessary.
March
The yearly lawn work programme really starts this month. As soon as
the ground conditions are suitable, the first cut can be made. The first
cut should merely “top” the grass as close cutting at this stage could
result in severe yellowing or browning. Two cuts are generally suffi-
cient this month.
April
Mow often enough to stop grass growing away. Dig out patches of
coarse grass or resistant weed. Re-seed bare patches.
May
Keep mowing increasing the frequency as required. Treat with selec-
tive weed killers or combined weed/feed preparations if you did not
feed the lawn in April.
June
Summer mowing should now be under way. It should be necessary to
mow the lawn twice a week. Raking before mowing is important this
month as the combined action keeps runners of clover under control.
Water the grass if necessary, and remember to soak thoroughly.
July
Treat the grass with the second application of fertiliser or weed
killer/fertiliser. Water when necessary and rake occasionally. As a gen-
eral rule the grass clippings should be removed each time you mow. If
weather conditions are dry and hot and the grass is weed free, leave the
clippings on the lawn to help maintain ground moisture.
1.16
Download from Www.Somanuals.com. All Manuals Search And Download.
LAWN CARE CALENDAR
August
Keep mowing regularly and watering as necessary. Fill any cracks
caused by drought with a mixture of sharp sand and soil. In dry weath-
er conditions leave the grass longer to help retain ground moisture.
September
Raise the height of cut to allow the grass to thicken and protect the
roots from the winter frost and snow.
October
Rake out the thatch from the turf and spike the lawn to assist in
drainage. Brush in peat and sharp sand.
November
Use a stiff broom to disperse worm casts before mowing. Keep turf
free from leaves.
December
Apart from brushing away leaves, December is a slack end of a busy
year. Keep off the lawn if it is very wet or frozen.
Lawn Stripes
1
The way to achieve a neat striped effect is for the lawn being cut in
parallel stripes, alternate stripes being mown in opposite directions. A
much more important routine is to cut at right angles to the line of the
previous mowing. If the work has been carried in a north-south line,
then the next cutting should be in an east-west direction. The cross-
cutting keeps down the coarse weed grasses.
2
1CG480V05A
To prevent grass damage do not remove more than one third of the
grass height in one cut.
1.17
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE SCHEDULE
Follow the hourly or calendar intervals, whichever occurs first. More
frequent service will be required if working for prolonged periods
under dusty, dry conditions, or when airborne debris is present or after
extensive operation cutting tall, dry grass.
First 5Hrs
After the very first five hours change the engine oil
Daily
Check the oil level
Remove grass debris from around the engine, exhaust/exhaust guard and
air ways in the top cowl and underside of the deck housing.
Remove grass debris from the grassbag and check for signs of damage.
Check the condition of guards and safety devices.
Check condition of cutterblade.
25Hrs or Every Season
Change the engine oil if continuously operating under heavy load or
high ambient temperature.
Service the air cleaner.
Lubricate wheels, pivot points and linkages and grease the inner con-
trol cables at point of entry and exit from their outer casing.
Check the clutch cable adjustment.
Sharpen the cutterblade.
50Hrs or Every Season
Change the engine oil.
100Hrs or Every Season
Clean the engine cooling system. Clean more often under dusty condi-
tions or when airborne debris is present or after prolonged operation
whilst cutting tall, dry grass.
Replace the spark plug.
1.18
Download from Www.Somanuals.com. All Manuals Search And Download.
MOWER MAINTENANCE
To prevent accidents stop the engine disconnect the spark plug
lead before attempting to carry out maintenance procedures on
the mower.
Engine
1. Engine Cowl
2. Carburettor
8
7
6
3. Spark Plug / Lead
4. Muffler Guard
5. Muffler
9
6. Oil filler Cap/ Dipstick
7. Start Grip
8. Fuel Cap
9. Finger Guard
10. Air Cleaner
10
1
2
5
4
3
Throttle Cable Adjustment
2
Remove two screws securing the engine cowl and remove the cowl to
expose the throttle mechanism on the front of the engine. Loosen the
outer cable clamp screw (1) and move the governor control lever (2) to
the left as far as possible. Insert a large, flat blade screw driver (3) into
the slot in the engine control bracket (4) at the angle shown. Push the
governor control lever to the right until it just touches the screw driver
blade. Move the throttle control lever to the ‘fast’ position (not the
‘choke’ position) and re-tighten the outer cable clamp screw. Replace
the engine cowl.
3
1
4
Carburettor Adjustments
Should only be made by an authorised Briggs & Stratton dealer. Under
no circumstances should the engine be adjusted to run at a speed in
excess of that shown on the Declaration of Conformity.
1.19
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Oil Service
MOWER
Check the oil level daily before starting the engine and ensure that the
correct oil level is maintained. Refer to-‘Before Starting the Mower’
for oil checking and filling instructions.
Change the engine oil after the first 5 hours of operation and thereafter
according to the ‘Maintenance Schedule’:-
1. Drain fuel by running the engine until the fuel tank is empty.
2. Remove the spark plug lead.
3. Allow the engine to cool.
4. Drain the oil while the engine is warm.(Not hot)
5. Tip the mower over on to its left hand side thus ensuring that
the air cleaner is kept uppermost to prevent engine damage.
6. Remove the oil filler dipstick and drain the oil into a suitable
container.
7. Refill with new oil of the recommended SAE viscosity grade.
(Refer to-‘Before Starting the Mower’)
Air Cleaner Service
4
3
1
To service the air cleaner, loosen screw (1) and remove cover (2).
Carefully remove pre-cleaner (3) and wash in a solution of liquid
detergent and water. Allow to air dry thoroughly before fitting.
Remove cartridge (4) and clean by tapping gently on a flat surface. If
very dirty, replace.
5
2
- Do not use petroleum solvents.
- Do not use pressurised air.
- Do not oil the cartridge.
After servicing, install the pre-cleaner and cartridge in the cover.
Insert the tabs on the bottom of the cover into the slots in the bottom
of the base (5). Tilt the cover upwards and securely tighten the screw
to the base.
1.20
Download from Www.Somanuals.com. All Manuals Search And Download.
MOWER MAINTENANCE
Spark Plug Service
Use only Briggs & Stratton spark tester (1) to check for a spark as
shown in the diagram.
Replace the spark plug every 100 hours or every season, whichever
occurs first. A spark plug wrench is available from any authorised
Briggs & Stratton service dealer.
1
Check the spark plug gap with a feeler gauge and set at 0.76mm.
Keeping Engine Clean
Remove all grass and debris from the engine including the
exhaust/exhaust guard, the air ways in the top cowl and the surround-
ing deck areas on a daily basis after use. Never spray the engine with
water during cleaning. Water can contaminate the fuel. Always clean
with a brush or compressed air.
Grass and debris may clog the engine’s air cooling system especially
after prolonged operation while cutting tall, dry grass. The internal cool-
ing fins and surfaces may require cleaning to prevent overheating and
engine damage. We recommended that this service be carried out by an
authorised Briggs and Stratton dealer.
Grassbag
Remove grass debris from the grassbag immediately after use and
check its condition for signs of damage.
To prevent accidents replace a damaged grassbag immediately.
1.21
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Deck Housing
MOWER
Remove grass debris from the top and underside of the deck housing
immediately after use.
To prevent accidents fertilisers and top dressings are particularly
corrosive. Thoroughly clean the mower deck immediately after use
on treated grass and store well away from corrosive materials.
Securing Nuts & Bolts
Regularly check that all securing nuts and bolts are tight. Replace
missing or damaged items immediately.
1CG480V36B
Clutch Cable Adjustment
32-38mm
Check the clutch cable operation every 25 operating hours and adjust
if necessary. The clutch cable is adjusted correctly when the belt drive
just engages with the clutch lever positioned 32-38mm from the han-
dlebar.
Unscrew the lock nuts (1) and screw the adjuster (2) in or out as nec-
essary. Tighten the locknuts (1) when correctly adjusted.
1
2
1.22
Download from Www.Somanuals.com. All Manuals Search And Download.
MOWER MAINTENANCE
Lubrication
Lubricate the wheels, pivot points and linkages with engine oil every 25
operating hours.
Apply a good quality medium grease to the inner control cables at the
point of entry and exit from their outer casing.
Cutterblade Removal
Drain the fuel by running the engine until the fuel tank is empty and the
engine stops. Remove the spark plug lead and allow the engine to
cool. Turn the mower on its left hand side and ensure that the air clean-
er side of the engine is uppermost.
Firmly grip the end of the cutterblade with the gloved hand and remove
the bolt, spring washer and distance piece securing the cutterblade with
a 9/16” A/F spanner.
33C
To prevent accidents never work on the cutterblade unless the
spark plug lead has been removed. The cutterblade has sharp
edges. ALWAYS wear strong gloves to protect your hands when
working on the cutterblade. DO NOT rotate tools towards the cut-
ting edges to avoid the risk of injury should the tool slip. ALWAYS
use genuine Hayter replacement parts.
The condition of the cutterblade and its mounting arrangement should
be checked regularly for signs of wear or damage. Ensure that the cut-
terblade is not bent or cracked.
A damaged cutterblade that is out of balance will vibrate excessively
and may break. DO NOT use an unbalanced cutterblade.
Regularly check that the bolt securing the cutterblade is tightened to the
specified torque of 54Nm.
Replace the cutterblade every 2 years of sooner if excessively worn or
damaged.
To prevent injury it is wise to seek assistance when turning the mower
on its side.
1.23
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
MOWER
Cutterblade Assembly
Assemble the cutterblade with the turned up edges facing towards the
engine. Secure the cutterblade using the bolt (1), spring washer (2), and
distance piece (3) and tighten to a torque of 54Nm
1
3
2
Cutterblade Sharpening
30°-45°
A slightly worn cutterblade may be re-sharpened. Both blade edges
must be sharpened equally to ensure balance. Sharpen the cutterblade
every 25 mowing hours or more frequently if conditions require.
Remove the cutterblade from the mower and clean using a brush and
water. Inspect the cutterblade for signs of damage.
Sharpen both cutting edges with a flat file to restore performance.
Ensure that the cutterblade is balanced. Use a screw driver with a
round shaft to support the cutterblade through its centre hole. Hold the
cutterblade horizontal and then release. A balanced cutterblade will
remain horizontal.
If the cutterblade is not balanced the heavy end will rotate downwards.
Sharpen the heavy end until the cutterblade is correctly balanced.
1.24
Download from Www.Somanuals.com. All Manuals Search And Download.
MOWER MAINTENANCE
Storage
To store the handlebar unscrew the 2 small securing knobs sufficient-
ly to allow it to be pivoted forwards to rest against the mower. Take
care to ensure that the control cables do not become snagged at the
pivot point and depress the engine stop lever to prevent it being dam-
aged through contact with the engine spark plug.
Engines stored in excess of 30 days need to be protected with Briggs &
Stratton fuel additive or drained of fuel to prevent gum from forming in
the fuel system or on essential carburettor parts. To ensure your mower
is maintained in good working order it is important that the following
procedure is adopted. Refer to the Maintenance section as necessary.
Drain fuel from the engine by operating the engine until it stops.
Disconnect the spark plug lead.
Change the engine oil.
Charge the battery.
Remove the engine spark plug and pour 15ml of engine oil into the
engine cylinder and replace the spark plug. Do not exceed the stated
volume of oil as engine damage may occur on re-starting. Do not
replace the spark plug lead. Slowly pull the engine start - grip once
to crank the engine. This will distribute the oil and help prevent engine
corrosion.
Clean grass and debris from the engine cylinder, cylinder head cooling
fins, under top cowl, and around and behind exhaust/exhaust guard.
Clean all other areas of the mower and ensure that the grassbag is clean.
Lubricate the mower.
Treat metal parts with a water repellent anti-corrosion product.
Disconnect the battery leads.
Cover the mower with a protective sheet and store it in a dry, ventilat-
ed area.
1.25
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
MOWER
Battery Charging
PREVENT ACCIDENTS: ALWAYS charge the battery in a well
ventilated area.
6hrs
NEVER charge the battery near naked flames or direct heat.
ALWAYS switch off the mains electricity supply before discon-
necting the charger from the battery.
ALWAYS use the battery charger supplied with the mower.
Battery charging should not be necessary during normal use. The
engine operation will automatically charge the battery. If the mower is
stored for a long period recharging the battery may be necessary to
permit electric starting.
Charge the battery only when necessary.
To recharge the battery:
Disconnect the battery lead from the mower lead and then connect the
battery lead to the charger.
Connect the charger plug to the mains electricity supply and switch on
to charge the battery for a six hour period.
Switch off the mains electricity supply and disconnect the charger
plug.
Disconnect the battery lead from the charger and then connect
the battery lead to the mower lead.
IMPORTANT - PREVENT DAMAGE: NEVER connect the bat-
tery charger to the engine lead as this will cause the charger to be
permanently damaged. Chargers damaged in this manner will not
be replaced under warranty.
CAUTION - PREVENT ENVIRONMENTAL DAMAGE: The
battery has a separate collection mark. This indicates that the
used battery must be taken to an authorised disposal site. It must
not be disposed of with general waste.
WS032
1.26
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
PROBLEM
POSSIBLE FAULT
REMEDY
Engine will not turn over
Engine stop lever released.
Incorrect oil level.
Operate engine stop lever.
Check oil level.
Obstruction under deck.
Battery discharge
Remove obstruction.
Charge battery
Engine smokes
Excess oil level.
Check oil level.
Air cleaner cartridge oil
soaked or blocked.
Service air cleaner.
Engine runs then stops
Engine will not start
Fuel starvation.
Fill fuel tank.
Fuel cap vent blocked.
Clean fuel cap vent.
Engine under load.
Fuel starvation.
Raise height of cut.
Fill fuel tank.
Engine cold.
Set throttle to ‘choke’ position.
Incorrect/contaminated fuel.
Drain fuel tank and fill with
correct fuel.
Spark plug lead disconnected.
Throttle setting incorrect.
Engine brake not released.
Faulty spark plug.
Connect spark plug lead.
Set throttle to ‘fast’ position.
Operate engine brake lever.
Clean and adjust gap or replace.
Charge battery
Battery discharge
Wiring fault.
Check wiring.
Engine runs rough
Spark plug lead becoming
disconnected in use.
Connect spark plug lead.
Faulty spark plug.
Clean and adjust gap or replace.
Service air cleaner.
Air cleaner blocked.
Incorrect/contaminated fuel.
Drain tank and fill with correct fuel.
1.27
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
PROBLEM
POSSIBLE FAULT
Mounting bolts loose.
Cutterblade bolt loose.
Cutterblade out of balance.
Bent crankshaft.
REMEDY
Engine vibrates excessively
Tighten bolts
Tighten bolt
Balance cutterblade
Consult your dealer
Uneven cut
Undulating ground conditions
Cutterblade worn
Change direction of travel
Sharpen the cutterblade
Cutterblade out of balance
Wheels / roller damaged
Balance the cutterblade
Inspect and replace as necessary
Discharge chute blocks
Grass is wet
Mow dry grass
Cut height too low
Grassbag full
Increase cut height
Empty grassbag
Clean the grassbag
Airflow through the
grassbag is restricted
Engine speed too slow
Set throttle to fast position
Mower is hard to push
Mower will not self propel
Poor grass collection
Cut height too low
Increase cut height
Wheels / roller damaged
Inspect and replace as necessary
Clutch out of adjustment
Drive belt damaged
Adjust clutch cable
Replace drive belt
Airflow through the
grassbag is restricted
Clean the grassbag
Discharge chute blocked
Wet grass
Remove blockage
Mow dry grass
Grassbag full
Empty grassbag
Engine speed too slow
Set throttle to fast position
1.28
Download from Www.Somanuals.com. All Manuals Search And Download.
DECLARATION OF CONFORMITY
EC DECLARATION OF CONFORMITY
HAYTER LIMITED,
Spellbrook, Bishop’s Stortford, Herts CM23 4BU ENGLAND
declare that the lawnmower:
Models:
Harrier 48
Machine Type No.
Category:
Type:
Engine manufacturer:
Speed of rotation:
Width of cutting device:
CODE 481A
Auto Drive Electric Start
Pedestrian Rotary
Briggs & Stratton
2800 rpm
480mm
Speed of rotation of the cutting device: 2800 rpm
Complies with the provisions of Directive: 98/37/EC Essential Health & Safety Requirements Relating to the
Design & Construction of Machinery and Safety Components.
Also Directive 89/336/EEC amended by 92/31/EEC Electromagnetic Compatibility.
Also Directive 2000/14/EC Noise emission in the environment by equipment for use outdoors. (ANNEX VI)
Notified Body: Sound Research Laboratories Ltd. Holbrook House, Little Waldingfield,
Sudbury, Suffolk, ENGLAND
Notified body identification No: 1088
Measured sound power level:
Guaranteed sound power level:
95.0 dB(A)
96 dB(A)
Standards Used: EN2921, EN836 and ENISO14982
Signed
Date: 30.10.01
HAYTER LIMITED,
Spellbrook, Bishop’s Stortford,
Herts CM23 4BU ENGLAND
M.A. Wright
(Technical Director)
VIBRATION INFORMATION
Lawnmower vibration information. RMS acceleration measured in 3 - axes at operators contact position on
the handlebars. CODE 481A = 5 ms-2
1.29
Download from Www.Somanuals.com. All Manuals Search And Download.
481A
PARTS LIST
DESCRIPTION
ITEM NO
PART NO.
QTY ITEM NOTE
1
2
3
4
5
6
7
8
Mainframe - Casting
Plate - Location RH
Clamp - Boss Inner
Clamp - Boss Outer
Handwheel - Assy
Key - Woodruff
Throttle Control & OPC Cable
Engine - B/S Diamond
Decal - Engine
Knob - Handlebar
Handlebar - Lower
Bolt - Handlebar
Nut - Nylon Insert
Washer - Plain
Guide Rope
Pin - Pivot
Decal - Engine Stop Transfer
Lever - Engine
Washer - Nylon
Handlebar
Lever - Clutch
Screw
Cable Guide
Bracket - Cable Clutch
Screw - Deltite Posi Pan
Cable - Clutch
Grassbag - Assy
Frame - Grassbag
Deflector - Rear
Pin - Roll
Spring - Deflector RH
Rod - Deflector
Screw - Hex. Hd. Taptite
Bolt - Coach
480010V
480083V
480084W
480085W
480054
1662
488028
481144
480142
480088
480186W
226024
09544
1
1
2
2
2
1
1
1
1
2
2
2
1
1
1
2
1
1
2
1
1
2
1
1
2
1
1
1
1
1
1
1
2
2
1
1
1
1
2
1
1
XTL45 APTO
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
09472
305093
340182
331046
340179
09688
341029
306094W
09687
480123
306108
09600
480094
486021
486018W
480140
03997
Inc. 28, 36 & 112
480131
480062
09758
09549
Knob - HOC
480134
486019
480130
480082V
480055
480014
480050
Grassbag - Fabric
Spring - Deflector LH
Plate - Location LH
Plate - Handlebar Retainer
Cover - APTO
41 Bearing - APTO
1.30
Download from Www.Somanuals.com. All Manuals Search And Download.
481A PARTS LIST
ITEM NO
DESCRIPTION
PART NO.
QTY ITEM NOTE
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
Screw - Washer Hd Taptite
Bush
Screw - Taptite
Screw
09575
340154
09349
3
2
3
2
1
1
1
4
2
2
2
2
22
2
2
2
1
1
1
1
1
1
1
4
1
1
1
2
1
1
1
1
1
1
2
1
1
1
1
1
1
09634
Lever - HOC
480128
480126
480011
09545
219102
480151W
480133
09262
Ratchet Moulding HOC
Throwplate - Main Body
Screw - Taptite
Bearing - Roller Housing
Roller - Rear W/A
Spring Tension - Rear Axle
Washer
Screw - Taptite
Bush - Oilite Roller
Roller Freewheel - Rocket Band
Spacer - Nylon
Shroud - Freewheel
Locknut
09365
340129
340150
340149
340168
340163
480032
480039
480159W
5321
Shaft - Roller
Sprocket - 22 Teeth
Frame - Rear Roller W/A
Key - woodruff
Circlip
Washer
Cover - Transmission
Chain
Rod - Connecting
Plate - Securing
Filler - Throwplate
Pulley - Sprocket Fixed Speed
Belt - V APTO
Inc. 113
1428
480097
480043
486037
480045
219037
480017W
480171
480063
02575
Washer
Circlip
03096
Pulley - Jockey
Washer - Starlock
Bracket - Idler Assy
Belt Guide
Pulley - Drive APTO
Spring - Torsion Idler
Bush
219156
0201086
480115
480116
480038
480066
4452
Washer - M12 H.D.
09280
1.31
Download from Www.Somanuals.com. All Manuals Search And Download.
481A PARTS
LIST
ITEM NO
DESCRIPTION
PART NO.
QTY
ITEM NOTE
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
Washer - Spring
Bolt - UNF
Distance Piece - Cutterbar
Cutterbar - 19”
Cover - Throwplate Drive
Disc - Friction
Spacer
Cap - Hub
Nut - UNF Nyloc
Wheel
Axle - Front W/A
Moulding - Front Axle Bearing
Fin - Front Insert
Decal - Hayter & Royal Warrant
Nut - M8 Shouldered
Guide - Rope
Plug - Tube
Tie - Cable
Sealing Strip
Key - Ignition
Lid - Battery Box
Foam Pad - Short
Battery
Clamp Plate - Battery Box
Foam Pad - Long
Battery Box
Battery Charger
Screw - Taptite
Guard - Transmission
Handle Grip
09273
09121
4014
480149
480012
480070W
480072
219143
4486
1
1
1
1
1
1
1
2
2
2
1
2
1
1
2
1
2
3
2
1
1
2
1
1
2
1
1
2
1
1
1
1
2
1
5218
219031
219036
480013
219186
480086
305127
300160
3966
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
480119
6426
488024
488023
220015
226094
488021
226090
226006
09546
480164
480106
480157W
480132
09336
Bracket HOC
Spring Torsion HOC
Rivet
Ratchet
480156
1.32
Download from Www.Somanuals.com. All Manuals Search And Download.
481A PARTS LIST
21
20
19
18
17
16
19
22
102
16
7
15
25
14
13
10
26
9
98
99
109
24
25
11
99
103
12
8
100
7
11
7
104
105
110
100
10
28
23
112
29
106
107
30
35
104
107
108
101
6
36
27
31
32
5
-Grassbag Assy.
Includes Items
28,36 & 112
33
4
47
97
34
3
2
39
42
43
40
116
1
37
41
38
3
44
39
97
96
4
5
70
52
53
54
60
45
48
56
49
50
65
57
58
57
54
49
55
56
59
54
88
89
51
52
54
90
91
51
54
87
62
63
111
50
54
69
74
73
26
55
54
76
79
68
49
92
82
83
61
64
93
94
86
78
69
65
71
85
84
72
81
49
68
92
75
76
80
94
54
77
54
67
66
91
42
46
95
114
90
54
115
54
113
1C481V01B
54
54
1.33
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMER INFORMATION /NOTES
Mower Serial No:.................................................................................
Engine Model:.................................. Type:....................................... Code:.....................................
Notes:
1.34
Download from Www.Somanuals.com. All Manuals Search And Download.
Gardening Tools
Garden Machinery
Cylinder Lawn
Mowers
Fertiliser
Hayter Lawn
Husqvarna
Kawasaki Brush
Cutters
Kawasaki
Strimmers
Chainsaws
Petrol Hedge
Ride on Lawn
Mowers
Westwood Lawn
Tractors
Westwood Ride
on Mowers
Kawasaki Petrol
Echo Petrol
Strimmers
Petrol Lawn
Mowers
Petrol Garden
Mowers
Rotary Lawn
Mowers
Hayter Garden
Mowers
Husqvarna Petrol
Chainsaws
Kawasaki Hedge
Kawasaki
Garden Hedge
Cutters
Electric Hedge
Cutters
Allen Hover
Mowers
Hedgecutters
Echo Petrol
Chainsaws
Electric
Hedgecutters
Rally Ride On
Mower
Rally Garden
Tractors
Bosch Hedge
Cutters
Bosch Hedge
Trimmers
Petrol Hedge
Trimmers
Garden Hedge
Trimmers
Fertilizer
Spreaders
Electric Garden
Garden Shredders
Sit on Lawn
Petrol Rotary Lawn Petrol Cyliner
Mowers
Lawn Mowers
Knapsack
Home Brush
Cutters
Home
Brushcutters
Petrol Brush
Cutters
Ryobi Brush
Cutters
Petrol Garden
Strimmers
Hayter Ranger 48
Autodrive
Petrol Rotary
Petrol Brush Cutters Lawn Mowers
Download from Www.Somanuals.com. All Manuals Search And Download.
Gardena Hedge
Cutters
Husqvarna Garden Kawasaki
Tractors
Brushcutters
Discounted
Echo Petrol
Chainsaws
Three Great Lawn Discounted Lawn Brush Cutter
Atco Lawn
Mowers
Mowers
Mowers
Selection
Kawasaki
Discounted
Brushcutters
Husqvarna Rider
Tractors
Brushcutters
Download from Www.Somanuals.com. All Manuals Search And Download.
|