INSTALLATION INSTRUCTIONS KK-K9-D14-K
K-9 TRANSPORTATION SYSTEM
1997-2003 DODGE DURANGO
TOOLS REQUIRED:
Power Drill
Standard And Metric Socket Sets
6” Extension
Drill Bits – 1/8” Through 3/8”
Phillips Screwdriver
Wire Cutters and Crimping Tool
Ratcheting Wrench
7/16” Wrench
HARDWARE: (some hardware included in assembly)
QTY: DESCRIPTION:
PART #:
10
70
96
30
15
26
24
6
2
2
2
2
4
4
4
4
4
1
#10 X ½” Stainless Phillips Flat Head Screw
1/4-20 X ½” Stainless Carriage Bolt
1/4-20 Serrated Nut
#10 X 1/2 Stainless Phillips Screw
#10 X 3/4 Stainless Phillips Screw
1/4-20 X ¾” Stainless Carriage Bolt
#12 X ¾” Stainless Phillips Screw
¼” X 1 ¼” Hex Head Lag bolt
3/8” X 1 ½” Hex Head Bolt
3/8” Flat Washer
3/8” Lock Washer
3/8” Hex Nut
3/8” X ½” Flat Washer
Rubber Feet
8-32 Keps Nut
8-32 X 1” Pem Stud
8-32 X 1” Phillips Machine Screws
Tube of Silver Silicone
GSM34150
GSM32022
GSM30023
GSM34169
GSM34170
GSM32024
GSM34177
GSM33061
GSM33030
GSM31007
GSM31028
GSM30008
GSM31021
PRM97609
GSM30027
GSM32252
GSM33112
PRM97343
COMPONENTS:
1
1
1
1
1
1
1
1
K-9 Main Housing
Dome Light Kit
Rubber Mat
Front Mounting Adjustable Legs
Set Of Tunnel Assemblies
Set Of Hinged Window Guards
Set Of Aluminum Door Panels
Rubber Edge Molding
SUB ASSEMBLIES:
• Attach dome light with wire to housing ceiling.
• Install rubber edge molding on edges of tunnels
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALL CEILING AND WALLS:
• Install ceiling with ¼-20 x ½” carriage bolts and serrated
nuts.
• Install front wall with ¼-20 x ½” carriage bolts
• Install rear wall of K-9 unit with ¼-20 x ½” carriage bolts.
INSTALL TUNNELS & DOORS:
• Loosely attach side tunnels to main housing 1/4-20 x ½”
carriage bolts or 1/4-20 x ¾”carriage bolts depending on
location.
• Attach step to tunnel.
MAIN HOUSING FINAL STEPS:
• Mount rear housing use ¼-20 x 1-½” lag bolts.
• Tighten all loose bolts in the assembly.
Note: Look under the vehicle & insure there are no obstructions.
OPTIONAL FAN: If optional fan has been purchased, install at this time.
• Mount dome light switch as desired. A switch box is provided so switch can be mounted to K9
housing in various locations. (side of tunnel housing at top works very well). Wire to 12 volt
power source.
• Sheet metal seams and gaps need to be carefully silicone at floor area. (proper sealing of
compartment will eliminate water from getting under K-9 unit)
• Allow silicone to dry overnight before placing in rubber floor
mat.
KK-K9-D14-K-INST-4-05
3
Download from Www.Somanuals.com. All Manuals Search And Download.
|