Havis Shields Automobile Accessories C CUP2 Series User Manual

Installation Instructions  
C-CUP2 SERIES CUPHOLDERS  
TOOLS REQUIRED:  
Torx TX20 Driver  
Phillips screwdriver  
Adjustable wrench (panel mount only)  
Warning: Please read all instructions and warnings prior to installation. This product must be installed  
and used in accordance with FMVSS, vehicle manufacturer, and all applicable laws, codes, and  
specifications. These instructions are provided as a guideline for proper installation, and do not  
purport to cover every possible installation scenario or configuration. If questions arise, consult the  
factory.  
INSTALLATION:  
There are four standard installation types, as listed below. Please follow the instructions applicable  
to your specific installation:  
C-CUP2-I Internal mount for enclosed consoles:  
1. The internal-mount cupholder requires  
4” of mounting space.  
4. Install the plastic cupholder insert by  
pressing it firmly into the bracket.  
2. First, select the optimum location for  
installing the cupholder. Carefully  
remove any equipment/panels already  
installed in that location.  
3. Using the hardware supplied, secure the  
cupholder bracket only to the console  
(without the plastic cupholder insert  
being installed.)  
Install the two rubber cupholder pads by  
pressing them firmly into each cup  
location, if they are not already installed.  
5. Replace any necessary equipment/panels  
to complete installation, ensuring that  
they are installed correctly.  
C-CUP2-E-AS or C-CUP2-E-C External mount to rear end-of-console extrusion:  
1. Most end-of-console mounted  
cupholders should be installed using this  
method.  
4. Using the hardware supplied, install the  
cupholder bracket only (without the plastic  
cupholder insert being installed.)  
2. First, remove any existing cupholders or  
other accessories that will interfere with  
the installation of the new cupholder.  
3. Remove the two screws holding the  
endcap onto the extrusion. Remove the  
plastic endcap (note that it may be held  
with adhesive.)  
5. Install the plastic cupholder insert by  
pressing it firmly into the bracket.  
Install the two rubber cupholder pads by  
pressing them firmly into each cup  
location, if they are not already installed.  
C-CUP2-INST-6-06  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Air Compressor H6310 User Manual
Hamilton Beach Vacuum Cleaner HB 405 User Manual
Harbor Freight Tools Camera Accessories 94555 User Manual
Harman Kardon Stereo Receiver AVR 3000 User Manual
Hotpoint Double Oven BD31 User Manual
Hotpoint Washer Dryer WT761 User Manual
HP Hewlett Packard Power Supply 5998 1958 User Manual
Humax Satellite TV System ND 1200C User Manual
IBM Fan DB2 9 User Manual
IBM Switch F12 User Manual