Hasbro Games 08977 User Manual

OVER 3 months  
08977  
Peek ‘N Play Discovery Dome™  
Thank you for choosing this  
unique PLAYSKOOL product!  
Adult assembly required.  
Tool needed: Phillips/  
crosshead screwdriver  
(not included).  
�  
�  
�  
�  
�  
�  
�  
�  
�  
�  
��  
�  
�  
�  
�  
�  
�  
 
�  
 
�  
�  
�  
�  
��  
 
�  
 
��  
�  
Includes fabric dome with rods, left fence panel/door, right fence panel, threshold, left front  
support, right front support, left rear base, right rear base, 3 balls, spider teether, phone, monkey  
rattle, fish rattle, mailbox shape sorter (2 pieces) with 3 fit-in shapes, 2 links, triangle, circle,  
���  
���  
�����  
�  
�����  
square, 12 washer head screws, LET’S PLAY TOGETHER tip card and playmat.  
WARNING: Continuous adult supervision required. To avoid injury and to prevent possible strangulation  
and entanglement injury: NEVER place dome in crib or playpen. ALWAYS play with dome on the floor. NEVER add  
strings or ties to the dome.  
CAUTION: This product contains small parts which are necessary for assembly. Prior to and during  
assembly of this product, keep small parts out of children’s reach. Small parts pose a choking hazard to  
children under 3 years.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
tab  
slot  
STEP 5a: Insert the fabric dome’s 2 front rods into  
the 2 rod holders located on the left and right front  
supports.  
STEP 8: Insert the tab on the front of the fabric  
dome into the slot on the back of the fence  
panels as shown.  
NOTE:  
Left front rod is marked: LF  
Right front rod is marked: RF  
 
STEP 5b: Turn the unit on its side and secure the 2  
front rods to the 2 rod holders by inserting washer  
head screws in each screw point.  
STEP 9: Attach tube bottom to slot on left front  
support. Secure tube to fabric with tabs as shown.  
STEP 6a: Connect the right rear base to the left rear base.  
STEP 6b: Turn the newly connected rear base over  
and secure it by inserting washer head screws in the  
screw points .  
STEP 10: Attach the shape sorter lid to the shape  
sorter mailbox as shown.  
PLAY FEATURES:  
Place the playmat on the floor.  
NOTE:  
Place the dome on the playmat  
so that the dome covers the  
corners of the playmat.  
Your child will love to explore the  
STEP 7a: Insert the fabric dome’s 2 back rods into  
activities on the playmat, which include:  
the 2 rod holders located on the rear base.  
• Peek-a-boo crinkly leaf  
NOTE:  
• Fun-to-touch satin flower  
Left back rod is marked: LR  
Right back rod is marked: RR  
 
��  
• Pull ribbon “hair” on the monkey  
 
�  
 
 
��  
�  
Please see your LET’S PLAY  
TOGETHER tip card (included) for  
all kinds of great play activities  
and ideas!  
 
�  
 
�  
�  
�  
�  
�  
��  
�  
�  
�  
�  
�  
�  
STEP 7b: Lift the rear panel and secure the 2 back rods to  
the 2 rod holders by inserting washer head screws in each  
screw point.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DECORATIONS, STORAGE AND PORTABILITY:  
3. This Playskool product easily folds together for storage  
and portability. Simply fold the front and back together  
and connect them using the straps as shown. Use the  
convenient carry handle for on-the-go play.  
1. Hanging toys can be attached to loops on the sides or  
at the top as shown. You can also attach other Let’s Play  
Together™ products (sold separately) to loops.  
2. Spider teether, rattles and the shape sorter mailbox can be  
placed in either of the 2 front slots or the inside slot as shown.  
4. Put-and-take pocket doubles as a storage pouch for balls.  
TO INSTALL BATTERIES:  
CAUTION: TO AVOID BATTERY LEAKAGE  
Use a Phillips/crosshead  
1. Be sure to insert the batteries correctly and always follow the toy and battery  
manufacturers’ instructions;  
screwdriver to loosen screw in  
battery compartment door (screw  
remains attached to door). Insert  
2 x 1.5V “AA” or R6 size batteries.  
Alkaline batteries recommended.  
Replace door and tighten screw.  
2. Do not mix old and new batteries or alkaline, standard (carbon-zinc) or  
rechargeable (nickel-cadmium) batteries;  
3. Always remove weak or dead batteries from the product.  
IMPORTANT: BATTERY INFORMATION  
Please retain this information for future reference. Batteries should be replaced by an adult.  
CAUTION:  
1. Always follow the instructions carefully. Use only batteries specified and be sure to insert item correctly by matching  
the + and – polarity markings.  
2. Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.  
3. Remove exhausted or dead batteries from the product.  
4. Remove batteries if product is not to be played with for a long time.  
5. Do not short circuit the supply terminals.  
6. Should this product cause, or be affected by, local electrical interference, move it away from other electrical equipment.  
Reset (switching off and back on again or removing and re-inserting batteries) if necessary.  
7. RECHARGEABLE BATTERIES: Do not mix these with any other types of battery. Always remove from the product before  
recharging. Recharge batteries under adult supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.  
FCC STATEMENT  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant  
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy, and, if not installed and used in accordance with the instructions, may cause harmful interference  
to radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
��  
© 2006 Hasbro. All Rights Reserved.  
TM & ® denote U.S. Trademarks  
08977  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Consult the dealer or an experienced radio/TV technician for help.  
P/N 6575080000  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grindmaster Coffeemaker 73010 User Manual
Grizzly Outdoor Cart H0760 User Manual
Grizzly Paint Sprayer H3256 User Manual
Grundig MP3 Docking Station CDS2500IPW User Manual
Haicom Recording Equipment HI 602 User Manual
Harbor Freight Tools Security Camera 67139 User Manual
Hearth and Home Technologies Stove CASTILE CSB User Manual
Heath Zenith Home Safety Product SH 7001 User Manual
HP Hewlett Packard Network Router Wireless Device User Manual
IBM Laptop 380XD User Manual