65785
JuMBo unIVersal
reMote control
InstructIons and precautIons
saVe these InstructIons. read all
precautIons and InstructIons.
©
®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09l
Download from Www.Somanuals.com. All Manuals Search And Download.
reVerse, plaY, ForWard, rec: These but-
tons are for DVD//VCD/DVR use and operate the
same as your original remote. You must press the
RECORD button twice to start recording.
Button FunctIons
code search: Used to program the remote or to
search through codes.
InFo: Shows the date and the time if your TV or
VCR has that feature.
led IndIcator lIght: The LED flashes to show
that the remote is working properly. Please note:
The LED Indicator Light will activate whenever
a button is pressed and will deactivate when the
button is released. The LED Indicator light will also
blink when codes are entered into the Remote.
clear: Removes the on screen display to return
to normal viewing.
BatterY InstallatIon
on/oFF Button: Operates the same as your
original remote. Some RCA, GE and ProScan
models require you to press the device button to
turn on the unit and press the remote ON/OFF but-
ton to turn it off.
1.
2.
3.
Remove the battery compartment cover from
the back of Remote.
Install (2) “AA” batteries, making sure to
install according to indicated polarity.
Slide battery compartment battery over bat-
teries and snap into place.
sleep: Allows you to set a time for you to turn off
your device automatically.
guIde: Brings up the on-screen TV program
guide, if your TV has that feature.
operatIng InstructIons
For tV only (direct entry)
Menu: Brings up the Main Menu. If you already
have the menu system, press SELECT to choose a
highlighted choice.
1.
2.
Find your brand and code in the lists on
pages 7and 8 and follow the steps below.
Press the Code Search Button (1) until the
LED Indicator turns on. Then release the
button.
go Back: Allows you to go to the previous chan-
nel.
Mute: Mutes volume on TV.
3.
4.
5.
Enter the corresponding 3-digit code. After a
valid code entry, the LED Indicator turns off.
In case of an invalid code entry, the LED will
flash.
caBle, tV, Vcr, dVd, sat: Used to select the
device you want to control.
0-9 nuMBer Buttons: The number buttons
operate the same as on your original remote and
are used to enter device codes.
With the unit (TV, DVD) on, press the Chan-
nel Up Button (5). If the TV responds, no
further programming is needed. If it does
not, try another code listed from your brand.
enter: Used to complete channel selection for
some brands of TV.
Use the chart below to record your codes for
easy reference.
tV/Vcr: Operates the TV/VCR function of your
VCR.
TYPE
TV
UNIT
CODE
naVIgatIon Buttons: Used to move though on
screen menu and guide. With some DBS models
up and down. On some DBS models the info But-
ton should be used to select the highlighted item.
VCR
SAT
DVD
CABLE
VoluMe Buttons: Increases or decreases the
volume.
6.
If the unit does not respond after trying all
the codes listed for your brand, do a manual
code search by doing the following steps.
channel Buttons: Increases or decreases the
channel numbers.
SKU 65785
For technical questions, please call 1-800-444-3353.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
3.
4.
5.
6.
Press and quickly release the correct product
key (TV, VCR, etc.) from the row of Devise
Select Controls (9). The LED Indicator will
blink and remain on.
For tV only (direct entry) continued
.
7.
8.
Manually turn on the unit to be controlled.
Enter the corresponding 3-digit code. After a
valid code entry the LED Indicator turns off.
In case of an invalid code entry, the LED will
flash.
Press and hold the Code Search Button until
the LED stays on. Release the Code Search
Button.
9.
Point the Remote at the unit and press the
Power Button until the unit turns off.
With the unit (TV, DVD) on, press the Chan-
nel Up Button (5). If the TV responds, no
further programming is needed. If it does
not, try another code listed from your brand.
10. If the unit does not turn off, press the Chan-
nel Up Button repeatedly until the unit
changes the channel.
Please Note: Some codes do not offer the
Remote full access so you may difficulties
with one code. Try another until one works
properly.
11. Once the unit is fully functional, press and
release the Mute Button (4) to save and pro-
gram the code.
12. Test all other buttons on the Remote to verify
they work properly.
If the unit does not respond after trying all the
codes listed for your brand or if your brand is
not listed, do a manual code search by doing
the following steps.
13. please note: When the Remote is set and
no keys have been pressed for fifteen sec-
onds, the Code Search feature will automati-
cally turn off.
7.
8.
Manually turn on the unit to be controlled.
Press and hold the Code Search Button until
the LED stays on. Release the Code Search
Button.
IdentIFYIng code
9.
Press and quickly release the correct product
key (TV, VCR, etc.) from the row of Devise
Select Controls. The LED will blink off once.
1.
2.
To program the code into the Remote, first
press Code Search Button until the LED Indi-
cator turns on. Then release the button.
10. Point Remote at unit you wish to control.
Press and quickly release the correct product
key (TV, VCR, etc.) from the row of Devise
Select Controls (9). The LED Indicator will
blink and remain on.
11. Press the Power Button (3) repeatedly (it
may take up to 300 times) until the device to
be controlled changes channel. The LED will
blink off with each press of the button.
3.
4.
Press the Code Search Button again. Con-
tinue to do so until the LED Indicator stays
on.
12. Press and release the Enter Button to install
the code.
13. please note: Most users store their unit
codes depending on the device, such as
storing TV codes for TV. But you can store
codes for other devices. For instance, you
may store a DVD code under a cable and
store something else under DVD. In order to
do this, you must program that device code
by direct code entry or search.
To find the first code, enter the numbers (0-9)
consecutively. When the LED light flashes,
this will set the first code. Repeat until you
find the second code and then the third code.
You will find each code manually by pressing
all ten keys to see which one responds.
5.
1.
Please note: When the control is set and no
keys have been pressed for fifteen seconds,
the Code Search feature will automatically
turn off.
please note: If the device do not have a
Channel Up Button and uses Play (VCR
only) or Power instead, the code search
starts from the currently stored three digits
number under that mode.
dIrect code entrY
Press and hold the Code Search Button until
the LED stays on. Release the Code Search
Button.
REV 09l
SKU 65785
For technical questions, please call 1-800-444-3353.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote is in TV mode, you must change
the mode to operate other devices like DVD,
VCR, satellite receiver or cable box. For
example, if the Remote is in VCR mode and
you wish to turn off the TV, first press the TV
key before pressing the Power Button.
auto code search
1.
If your device does not respond after you
have tried all the codes for your brand, or if
your brand is not listed, try searching for your
brand this way:
2.
3.
Manually turn on the unit to be controlled.
on-screen Menus-accessIng and
selectIng Menu IteMs
Press and hold the Code Search Button until
the LED stays on. Release the Code Search
Button.
1.
To use a device’s on-screen menu system,
put the Remote in Menu mode
4.
Press and quickly release the correct product
key (TV, VCR, etc.) from the row of Devise
Select Controls. The LED Indicator will blink
off once.
2.
Verify devices are turned on and your TV is
set to the devices’ input (use the Input Button
to toggle through video sources when in TV
mode.)
5.
6.
Point Remote at unit you wish to control.
3.
4.
5.
Press device key of menu you want to ac-
cess.
Press the Power Button down until the LED
light stays on.
Press Menu Button. The LED light will blink,
indicating you are in Menu mode.
7.
8.
The LED light will keep flashing until device
turns off.
Use the Volume and Channel control keys
to navigate through the on-screen menu
system.
Press and release the Enter Button to store
the code.
code retrIeVal
6.
7.
To make a selection from the on-screen
Menu, press the Menu, OK, Info, and then
Enter keys to select the highlighted item.
1.
2.
Manually turn on the unit to be controlled.
Press and hold the Code Search Button until
the LED stays on. Release the Code Search
Button.
please note: If the Remote does not re-
spond, make sure LED light is still blinking.
Remember, it times out after fifteen seconds.
If this happens, press the Menu Button again
and retry selection.
3.
4.
5.
Press the correct product key (TV, VCR, etc.)
you want to control.
Press the Code Search Button again. The
LED should blink once.
eXItIng Menu Mode
1.
2.
The Remote automatically times out of Menu
mode after fifteen seconds without a key be-
ing pressed. Once this happens, the Remote
will clear the displayed menu from the TV.
Follow the sequence of (0)(9) and press
once for each number button until the LED
flashes once.
6.
7.
Repeat steps 2-8 from above until three cor-
rect codes are confirmed.
If you wish to exit the menu yourself, press
the corresponding device key on the Remote
(TV, DVD, VCR, etc.) The LED light will turn
off.
If the LED flashes, than you have entered an
incorrect number. Please repeat the (0)(9)
sequence.
sleep tIMer
usIng the reMote
1.
This feature allows you to time how long the
TV will remain on at night. It can range from
1 to 99 minutes. please note: The Sleep
Timer only works if you are programmed to
your TV mode and have the Remote aimed
at the TV.
1.
2.
Since the Remote controls more than one
device, you must “tell” the Remote which
device you wish to operate. If you wish to
operate your TV, you must first press the TV
key to put the Remote in the TV mode.
The Remote will stay in the selected mode
(such as TV) until it is changed. If your
2.
To program the Sleep Timer, first press and
release the TV Button.
SKU 65785
For technical questions, please call 1-800-444-3353.
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
record serial number here:
3.
Press and hold the Sleep Button for five sec-
onds. The LED light will turn on.
note:If product has no serial number, record
month and year of purchase instead.
4.
5.
Release the Sleep Button.
note:No replacement parts are available.
Using the number keys, enter the desired
time in minutes (from 1 to 99). To set the
Timer to time that is under ten minutes, press
“0” and then the desired number (“05” for five
minutes.) The LED light will blink with each
pressed key.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
6.
7.
Once the second number is entered, the LED
turns off and the Sleep Timer is not set.
please note: If you press any keys other
than the numbers, they will be ignored. You
will have ten seconds to program the Sleep
Timer, otherwise the LED light will blink four
times and exit the program.
please read the FolloWIng careFullY
THE MANUFACTURER AND/OR DISTRIBUTOR
HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS DOCUMENT AS
A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE OR SHE
IS qUALIFIED TO MAKE ANY REPAIRS TO THE
PRODUCT, OR THAT HE OR SHE IS qUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT.
IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND NOT BY
THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
8.
9.
Be sure to leave the Remote aimed at the
TV. Once the Sleep Timer is set, you can
continue to use the Remote without altering
the Sleep Timer.
Please remember that the Remote must
remain in TV mode for the Sleep Timer to
activate.
10. To cancel the Sleep Timer, press and release
the Sleep Button and the Power Button. This
will reset the program to zero. The LED light
will flashing, stating the time has been reset
to Zero.
SKU 65785
For technical questions, please call 1-800-444-3353.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
tV codes
SKU 65785
For technical questions, please call 1-800-444-3353.
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
tV codes contInued
SKU 65785
For technical questions, please call 1-800-444-3353.
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Vcr codes
SKU 65785
For technical questions, please call 1-800-444-3353.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Vcr codes contInued
laser dIsc codes
SKU 65785
For technical questions, please call 1-800-444-3353.
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
dVd codes contInued
SKU 65785
For technical questions, please call 1-800-444-3353.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
caBle codes
SKU 65785
For technical questions, please call 1-800-444-3353.
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
satalIte codes
dVd/Vcr coMBo sYsteM codes
tV/Vcr coMBo paIrs codes
SKU 65785
For technical questions, please call 1-800-444-3353.
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Groupe SEB USA T FAL Iron PRO EXPRESS User Manual
Hamilton Beach Coffeemaker 49991 User Manual
Hamilton Beach Kitchen Grill 840058500 User Manual
Harbor Freight Tools Stud Sensor 45891 User Manual
Honeywell Thermostat TL6120 User Manual
Hotpoint Refrigerator HM315I User Manual
HP Hewlett Packard Personal Computer 576X B User Manual
HP Hewlett Packard Server 4345mfphp User Manual
Hunter Fan Humidifier 31017 User Manual
IBM Switch VOL 2008 User Manual