not avoided, could result in
minor or moderate injury.
saVe this manual
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month
and year of purchase if product has no
number). Keep this manual and the
receipt in a safe and dry place for future
reference.
notiCe is used to
address practices
not related to personal injury.
nose, ear & sideburns
Caution, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
hair trimmer
67336
set up and operating instructions
General Battery operated tool
safety Warnings
important saFetY
inFormation
in this manual, on the labeling,
and all other information
WarninG read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, and/or serious injury.
save all warnings and
provided with this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. obey all
safety messages that
instructions for future reference.
1. Work area safety
a. Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
follow this symbol to avoid
possible injury or death.
b. Keep children and bystanders
away while operating the tool.
Distractions can cause you to lose
control.
DanGer indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
®
distributed exclusively by harbor Freight tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
2. personal safety
Visit our website at: http://www.harborfreight.com
a. stay alert, watch what you are
doing and use common sense
when operating the tool. Do not
use the tool while you are tired
or under the influence of drugs,
alcohol or medication. A moment
of inattention may result in serious
personal injury.
WarninG
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
read this material before using this product.
Failure to do so can result in serious injury.
saVe this manual.
Copyright© 2009 by Harbor Freight Tools®
All rights reserved. No portion of this manual or any artwork
.
Caution, used
with the safety
alert symbol, indicates a
hazardous situation which, if
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
b. prevent unintentional starting.
ensure the switch is in the off-
For technical questions or replacement parts, please call 1-800-444-3353.
Page 2
For technical questions, please call 1-800-444-3353.
SKU 67336
position before inserting the
battery.
will ensure that the safety of the tool
is maintained.
Functions
speciFications
Sideburns Trimming
Electrical Input One “AA” Battery (sold separately)
- Nose hair trimmer attachment
Cap (9)
Attachment
3. Battery operated tool use and care
trimmer safety Warnings
Switch (27)
a. Do not force the tool. use the
correct tool for your application.
The correct tool will do the job better
and safer at the rate for which it was
designed.
Accessories
with Cap
1. The Trimmer is not waterproof and
is not intended to be submerged
or rinsed, with the exception of the
removable Trimming Attachments.
- Sideburns trimmer attachment
unpacKing
Battery
Cover (23)
b. Do not use the tool if the switch
does not turn it on and off. Any
tool that cannot be controlled with
the switch is dangerous and must be
repaired.
Cleaning Brush
2. The Trimmer has sharp edges that
can cause injury if not used properly.
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
Nose Hair Trimming
Attachment
Trimmer Body
3. Do not insert the Trimmer further into
your nostril or ear than the narrow tip
on the outer blade. Do not press the
Trimmer forcefully into your nostril or
ear. For facial hair only.
Alignment Slot
Figure 1
c. Do not allow persons unfamiliar
with the tool or these instructions
to operate the tool. Battery
operated tools are dangerous in the
hands of untrained users.
instructions For
putting into use
tool set up
4. Do not attempt to use the Trimmer
if any part of the blade appears
damaged. Injury to the nostril or ear
might occur.
installing Battery
read the entire important
saFetY inFormation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
d. Maintain tools. check for
misalignment or binding of
Switch (27)
Alignment Slot
Battery
Cover (23)
moving parts, breakage of parts
and any other condition that may
affect the tool’s operation. if
damaged, have the tool repaired
before use. Many accidents are
caused by poorly maintained tools.
5. This product is not a toy. Keep it out
of reach of children.
6. The warnings, precautions,
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
to preVent
serious injurY
From accidental
operation:
slide the switch to the off
position (toward the Battery
cover) before adjusting tool
or installing accessories or
the battery.
Trimmer Body
e. Keep cutting tools clean. Properly
maintained cutting tools are less
likely to bind and are easier to
control.
Figure 2
This Trimmer uses one “AA” battery
(sold separately). To install the
battery:
f. use the tool and accessories
in accordance with these
instructions. Use of the tool for
operations different from those
intended could result in a hazardous
situation.
1. Rotate the Battery Cover (23) counter
clockwise, then pull it off the end of
the Trimmer Body.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
saVe these
instructions.
2. Insert one “AA” battery (sold
separately) into the battery
compartment with the polarity placed
as indicated.
4. service
a. have your tool serviced by a
qualified repair person using only
identical replacement parts. This
3. Replace the Battery Cover.
SKU 67336
For technical questions, please call 1-800-444-3353.
Page 3
Page 4
For technical questions, please call 1-800-444-3353.
SKU 67336
Download from Www.Somanuals.com. All Manuals Search And Download.
|