Harbor Freight Tools Air Compressor 95630 User Manual

COMPRESSOR AND  
AIR BRUSH KIT  
Model 95630  
SET UP AND OPERATING INSTRUCTIONS  
Read and understand tool labels and  
manual. Failure to follow warnings could  
result in DEATH or SERIOUS INJURY.  
SAVE THIS MANUAL.  
©
®
Copyright 2010 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork  
contained herein may be reproduced in any shape or form without the express written consent of  
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing  
improvements, actual product may differ slightly from the product described herein. Tools required for  
assembly and service may not be included.  
For technical questions or replacement parts, please call 1‑800‑444‑3353.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
moving parts. Damaged or entangled  
cords increase the risk of electric shock.  
General  
a. To reduce the risks of electric shock,  
fire, and injury to persons, read all the  
instructions before using the tool.  
e. When operating a power tool  
outdoors, use an extension cord  
suitable for outdoor use. Use of a cord  
suitable for outdoor use reduces the risk  
of electric shock.  
Work area  
a. Keep the work area clean and well  
lighted. Cluttered benches and dark  
areas increase the risks of electric  
shock, fire, and injury to persons.  
f.  
If operating a power tool in a damp  
location is unavoidable, use a Ground  
Fault Circuit Interrupter (GFCI)  
protected supply. Use of a GFCI  
reduces the risk of electric shock.  
b. Do not operate the tool in explosive  
atmospheres, such as in the presence  
of flammable liquids, gases, or dust.  
The tool is able to create sparks resulting  
in the ignition of the dust or fumes.  
Personal safety  
a. Stay alert. Watch what you are  
doing and use common sense when  
operating the tool. Do not use the  
tool while tired or under the influence  
of drugs, alcohol, or medication. A  
moment of inattention while operating  
the tool increases the risk of injury to  
persons.  
c. Keep bystanders, children, and  
visitors away while operating the tool.  
Distractions are able to result in the loss  
of control of the tool.  
Electrical Safety  
a. Power tool plugs must match the  
outlet. Never modify the plug in  
any way. Do not use any adapter  
plugs with grounded power tools.  
Unmodified plugs and matching outlets  
will reduce risk of electric shock.  
b. Dress properly. Do not wear loose  
clothing or jewelry. Contain long hair.  
Keep hair, clothing, and gloves away  
from moving parts. Loose clothes,  
jewelry, or long hair increases the risk  
of injury to persons as a result of being  
caught in moving parts.  
b. Avoid body contact with grounded  
surfaces such as pipes, radiators,  
ranges and refrigerators. There is an  
increased risk of electric shock if your  
body is grounded.  
c. Avoid unintentional starting. Be  
sure the Power Switch if off before  
connecting to the air supply. Do not  
carry the tool with your finger on the  
Power Switch or connect the tool to the  
air supply with the trigger pressed.  
c. Do not expose power tools to rain or  
wet conditions. Water entering a power  
tool will increase the risk of electric  
shock.  
d. Do not overreach. Keep proper  
footing and balance at all times.  
Proper footing and balance enables  
better control of the tool in unexpected  
situations.  
d. Do not abuse the cord. Never use  
the cord for carrying, pulling or  
unplugging the power tool. Keep cord  
away from heat, oil, sharp edges or  
SKU 95630  
For technical questions, please call 1‑800‑444‑3353.  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
persons. A tool is dangerous in the  
hands of untrained users.  
e.  
Use safety equipment. A  
dust mask, non-skid safety  
shoes and a hard hat must be  
used for the applicable  
f.  
Maintain the tool with care. A properly  
maintained tool reduces the risk of  
binding and is easier to control.  
conditions. Wear heavy-duty work  
gloves during use.  
g. Check for misalignment or binding  
of moving parts, breakage of parts,  
and any other condition that affects  
the tool’s operation. If damaged,  
have the tool serviced before using.  
Many accidents are caused by poorly  
maintained tools. There is a risk of  
bursting if the tool is damaged.  
f.  
Always wear eye protection.  
Wear ANSI-approved safety  
goggles with side shields.  
g.  
Always wear hearing  
protection when using the  
tool. Prolonged exposure to  
high intensity noise is able to  
cause hearing loss.  
h. Use only accessories that are  
identified by the manufacturer for  
the specific tool model. Use of an  
accessory not intended for use with the  
specific tool model, increases the risk of  
injury to persons.  
Tool use and care  
a. Use clamps or another practical way  
to secure and support the workpiece  
to a stable platform. Holding the work  
by hand or against the body is unstable  
and can lead to loss of control.  
Service  
a. Tool service must be performed only  
b. Do not force the tool. Use the correct  
tool for the application. The correct tool  
will do the job better and safer at the rate  
for which the tool is designed.  
by qualified repair personnel.  
b. When servicing a tool, use only  
identical replacement parts. Use only  
authorized parts.  
c. Do not use the tool if the Power  
Switch does not turn the tool on or  
off. Any tool that cannot be controlled  
with the Power Switch is dangerous and  
must not be used until repaired.  
SAVE THESE  
INSTRUCTIONS.  
d. Disconnect the tool from the air  
source before making adjustments,  
doing tool maintenance, clearing  
jams, touching the safety nosepiece,  
leaving work area, loading, or  
unloading the tool. Such precautionary  
measures reduce the risk of injury to  
persons.  
e. Store the tool when it is idle out of  
reach of children and other untrained  
Page 4  
For technical questions, please call 1‑800‑444‑3353.  
SKU 95630  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Do not stand or sit on the Air  
Compressor. Serious injury could result  
if the Compressor is tipped.  
Specific Safety Instructions  
1. Maintain labels and nameplates on the  
tool. These carry important information.  
If unreadable or missing, contact Harbor  
Freight Tools for a replacement.  
9. Do not leave the Air Compressor  
unattended when it is plugged in.  
Turn off the Compressor and unplug  
before leaving.  
2. DANGER! This Air Compressor is  
NOT equipped and should not be used  
“as is” to supply breathing quality air.  
For any application of air for human  
consumption, you must fit the Air  
Compressor with suitable in-line safety  
and alarm equipment (not included).  
This additional equipment is necessary  
to properly filter and purify the air to  
meet minimal specifications for Grade D  
breathing as described in Compressed  
Gas Association Commodity  
10. Do not move or transport the  
Air Compressor if the unit is  
under pressure.  
11. Do not force the Air Compressor.  
This tool will do the work better and safer  
at the speed and capacity for which it  
was designed.  
12. This Air Compressor will  
automatically shut off on overload  
or under excessive heat. Should  
this occur, turn the Power Switch (34)  
to its “OFF” position. Wait until the  
Air Compressor cools. Then turn the  
Power Switch (34) to its “ON” position to  
resume work.  
Specification G 7.1-1966, OSHA 29 CFR  
1910. 134, and/or Canadian Standards  
Associations (CSA).  
3. Make sure all tools and equipment  
used with the Air Compressor are  
rated to the appropriate capacity.  
Do not use any tool or equipment that  
operates above 58 PSI.  
13. Spray painting only. Do not use this Air  
Compressor with gasoline, kerosene, or  
any other flammable solvent.  
4. Drain the Air Compressor everyday.  
Do not allow excessive moisture to build  
up inside the Air Compressor. Do not  
open the Water Drain Valve (23) with  
more than 10 PSI of air pressure in the  
Compressor.  
14. Maintain a safe working environment.  
Make sure there is adequate  
surrounding workspace. Do not use  
this product in a damp or wet location.  
15. People with pacemakers should  
consult their physician(s) before  
using this product. Electromagnetic  
fields in close proximity to a heart  
pacemaker could cause interference to  
or failure of the pacemaker. In addition,  
people with pacemakers should adhere  
to the following:  
5. Avoid injury. Do not direct compressed  
air at people of animals. Do not direct  
airflow at eyes or ears.  
6. Make sure the Air Compressor is  
located on a flat, level, sturdy surface  
capable of supporting the weight of  
the Compressor and any additional  
tools and equipment.  
Avoid operating power tools alone.  
Don’t use a power tool with the power  
switch locked on.  
If powered via a power cord be certain  
that the tool is properly grounded. A  
7. Industrial applications must follow  
OSHA guidelines.  
SKU 95630  
For technical questions, please call 1‑800‑444‑3353.  
Page 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ground fault interrupt (GFCI) system  
is also a good precaution. This  
inexpensive device is a good safety  
measure because it prevents a sustained  
electrical shock.  
SAVE THESE  
INSTRUCTIONS.  
Groun  
Grounding  
Properly maintain and inspect all tools  
before use to avoid electrical shock  
16. Never leave the tool unattended when  
it is plugged into an electrical outlet.  
Turn off the tool, and unplug it from its  
electrical outlet before leaving.  
TO PREVENT ELECTRIC  
SHOCK AND DEATH  
FROM  
INCORRECT GROUNDING  
WIRE CONNECTION:  
17. WARNING: The brass components of  
this product contain lead, a chemical  
known to the State of California  
Check with a qualified electrician  
if you are in doubt as to whether  
the outlet is properly grounded.  
Do not modify the power cord  
plug provided with the tool.  
Never remove the grounding  
prong from the plug. Do not use  
the tool if the power cord or plug  
is damaged. If damaged, have it  
repaired by a service facility  
before use. If the plug will not fit  
the outlet, have a proper outlet  
installed by a  
to cause birth defects (or other  
reproductive harm). (California Health  
& Safety code § 25249.5, et seq.)  
18. WARNING: Some dust created by  
power sanding, sawing, grinding,  
drilling, and other construction  
activities, contains chemicals  
known [to the State of California] to  
cause cancer, birth defects or other  
reproductive harm. Some examples of  
these chemicals are:  
Lead from lead-based paints  
Crystalline silica from bricks and cement  
or other masonry products  
qualified electrician.  
Grounded Tools:  
Tools with Three Prong Plugs  
Arsenic and chromium from chemically  
treated lumber  
Your risk from these exposures varies,  
depending on how often you do this  
type of work. To reduce your exposure  
to these chemicals: work in a well  
ventilated area, and work with approved  
safety equipment, such as those dust  
masks that are specially designed to  
filter out microscopic particles. (California  
Health & Safety Code § 25249.5, et seq.)  
3‑Prong Plug and Outlet  
19. Always maintain adequate ventilation,  
especially when using solvent based  
paints and during clean up.  
1. Tools marked with “Grounding Required”  
have a three wire cord and three prong  
grounding plug. The plug must be  
connected to a properly grounded outlet.  
Page 6  
For technical questions, please call 1‑800‑444‑3353.  
SKU 95630  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the tool should electrically malfunction  
or break down, grounding provides a  
low resistance path to carry electricity  
away from the user, reducing the risk  
of electric shock. (See 3‑Prong Plug  
and Outlet.)  
2. Double insulated tools may be used in  
either of the 120 volt outlets shown in the  
preceding illustration.  
(See Outlets for 2‑Prong Plug.)  
Extension Cords  
1. Grounded tools require a three wire  
extension cord. Double Insulated  
tools can use either a two or three wire  
extension cord.  
2. The grounding prong in the plug is  
connected through the green wire inside  
the cord to the grounding system in the  
tool. The green wire in the cord must  
be the only wire connected to the tool’s  
grounding system and must never be  
attached to an electrically “live” terminal.  
(See 3‑Prong Plug and Outlet.)  
2. As the distance from the supply outlet  
increases, you must use a heavier gauge  
extension cord. Using extension cords  
with inadequately sized wire causes a  
serious drop in voltage, resulting in loss  
of power and possible tool damage.  
(See Table A on page <?>.)  
3. The tool must be plugged into an  
appropriate outlet, properly installed  
and grounded in accordance with all  
codes and ordinances. The plug and  
outlet should look like those in the  
preceding illustration.  
3. If you are using an extension cord  
outdoors, make sure it is marked with the  
suffix “W-A” (“W” in Canada) to indicate it  
is acceptable for outdoor use.  
(See 3‑Prong Plug and Outlet.)  
Double Insulated Tools:  
Tools with Two Prong Plugs  
4. Protect the extension cords from sharp  
objects, excessive heat, and damp or  
wet areas  
TABLE A: RECOMMENDED MINIMUM  
WIRE GAUGE FOR EXTENSION CORDS*  
(120/240 VOLT)  
EXTENSION CORD  
LENGTH  
NAMEPLATE  
AMPERES  
(at full load)  
25´ 50´ 75´ 100´ 150´  
0 – 2.0  
2.1 – 3.4  
18  
18  
18  
18  
18  
14  
12  
18  
18  
18  
16  
14  
12  
10  
18  
18  
16  
14  
12  
10  
-
18  
16  
14  
12  
10  
-
16  
14  
12  
12  
-
Outlets for 2‑Prong Plug  
1. Tools marked “Double Insulated” do not  
require grounding. They have a special  
double insulation system which satisfies  
OSHA requirements and complies with  
the applicable standards of Underwriters  
Laboratories, Inc., the Canadian  
3.5 – 5.0  
5.1 – 7.0  
7.1 – 12.0  
12.1 – 16.0  
16.1 – 20.0  
-
-
-
* Based on limiting the line voltage drop to five volts at  
Standard Association, and the National  
Electrical Code.  
150% of the rated amperes.  
SKU 95630  
For technical questions, please call 1‑800‑444‑3353.  
Page 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional Description  
Symbology  
Double Insulated  
Compressor Specifications  
Type  
Single cylinder, oiless piston  
1/5 HP  
Canadian Standards Association  
Underwriters Laboratories, Inc.  
Volts Alternating Current  
Amperes  
Power  
Voltage  
120, 60HZ, 1.18 AMP  
Thermo-Overload  
shutoff protection  
Auto shutoff  
V~  
A
Air output  
0 - 58 PSI  
Air outlet size  
Motor RPM  
Pressure Gauge  
Cord length  
1/8 - 27 NPT male threads  
1750  
No Load Revolutions per Minute  
(RPM)  
0-100 PSI  
n xxxx/min.  
0
6’-2 1/2”L  
WARNING marking  
concerning Risk of Eye Injury.  
Wear ANSI-approved safety  
goggles with side shields.  
Air Brush Specifications  
Working Air  
0.5 CFM @ 20 PSI  
Read the manual before set-up  
and/or use.  
Pressure  
Air Hose length  
Housing  
Approx. 5FT  
Anodized Aluminum  
22cc Glass jar assembly  
5cc Metal cup  
WARNING marking concerning  
Risk of Hearing Loss.  
Wear hearing protection.  
Accessories  
WARNING marking concerning  
Risk of Fire.  
Metal Hanger  
Do not cover ventilation ducts.  
Keep flammable objects away.  
WARNING marking concerning  
Risk of Electric Shock.  
Properly connect power cord to  
appropriate outlet.  
INITIAL ASSEMBLY  
Read the ENTIRE IMPORTANT  
SAFETY INFORMATION  
section at the beginning of this  
manual including all text under  
subheadings therein before set up  
or use of this product.  
Note: For additional information regarding  
parts listed in following pages, refer to  
Assembly Diagrams near end of manual.  
Unpacking  
When unpacking, make sure that the  
item is intact and undamaged. If any parts  
are missing or broken, please call Harbor  
Freight Tools at 1-800-444-3353 as soon  
as possible.  
Page 8  
For technical questions, please call 1‑800‑444‑3353.  
SKU 95630  
Download from Www.Somanuals.com. All Manuals Search And Download.  
tripping hazard or exposing the air hose  
to possible damage. The air hose must  
be long enough to reach the work area  
with enough extra length to allow free  
movement while working.  
Initial Tool Setup/Assembly  
Read the ENTIRE  
IMPORTANT SAFETY  
INFORMATION section at the  
beginning of this manual  
including all text under  
subheadings therein before set  
up or use of this product.  
3. Secure loose workpieces using a vise  
or clamps (not included) to prevent  
movement while working.  
4. There must not be hazardous objects  
(utility lines or foreign objects) nearby  
that present a hazard while working.  
Inspect tool before use, looking  
for damaged, loose, and missing  
parts. If any problems are found,  
do not use tool until repaired.  
General Operating Instructions  
1. Choose a 120V power supply and plug in  
Air Compressor.  
1. Connect one end of the air hose to the  
Air Outlet (38).  
2. Set the Pressure Gauge to desired air  
pressure (maximum 58 PSI).  
2. Connect other end of air hose to the Air  
Brush (27).  
3. Fill the 22cc Glass Jar (31A) after  
thinning your paint properly.  
3. Inspect the air connections for leaks.  
Repair any leaks found.  
NOTE: Use the proper solvent for thinning.  
Use lacquer thinner for all lacquers, paint  
thinner for oil based paints, and water for  
all latex based paints.  
Operating Instructions  
Read the ENTIRE IMPORTANT  
SAFETY INFORMATION  
section at the beginning of this  
manual including all text under  
subheadings therein before set up  
or use of this product.  
4. Hold the Air Brush Housing (8A) lightly  
in your hand and push the tappered  
fitting on the lid of the 22cc Glass Jar  
Assembly (31A) into the base of the Air  
Brush Housing (8A). It is held in place  
with friction and not threading.  
Inspect tool before use, looking  
for damaged, loose, and missing  
parts. If any problems are found,  
do not use tool until repaired.  
5. Turn on the Power Switch (34) and  
the Air Compressor will start and  
work continuously until it reaches its  
maximum preset pressure which will  
be approximately 55 PSI at which time  
it will automatically shut down. It will  
re-start when the pressure drops to  
approximately 42 PSI.  
Work Piece and Work Area Set Up  
1. Designate a work area that is clean and  
well-lit. The work area must not allow  
access by children or pets to prevent  
distraction and injury.  
6. By pressing the Finger Lever (10A)  
air will emerge from the Nozzle (3A).  
Draw back slowly/gently on the Finger  
2. Route the air hose along a safe route to  
reach the work area without creating a  
SKU 95630  
For technical questions, please call 1‑800‑444‑3353.  
Page 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lever (10A)) and the fluid will atomize.  
Continue to move the Finger Lever (10A)  
to achieve the air volume you need for  
your spray technique.  
OFF Power Switch (34) and unplugging  
the Compressor from the 120 V power  
supply, or from your extension cord.  
NOTE: The 5cc Metal Cup (28A) has two  
uses. It is used for excess thinned paint,  
and also for solvent when it is time to  
clean the Air Brush.  
7. Continue to adjust the spray volume by  
using the Finger Lever (10A), moving it  
front to back. When you have the correct  
spray volume, you may fix the position  
using the Adjustment Screw (9A).  
NOTE: The Metal Hook (30A) can be  
attached to a solid surface and used to  
hang Air Brush when it is not being used.  
8. The size of the spray pattern will be in  
accordance with the distance between  
the work surface and the Nozzle (3A)  
of the Air Brush. For extra-fine spray,  
remove the Protective Cap (1A) and hold  
the Air Brush nearer the work surface.  
User‑Maintenance Instructions  
Procedures not specifically  
explained in this manual must  
be performed only by a qualified  
technician.  
9. When you are finished painting, gently  
release pressure on Finger Lever (10A).  
NOTE: If while using this Air Brush and  
fluid blocks the Nozzle (3A) from  
working, move Needle Chucking  
Guide (13A) back and forth. If this  
does not clear the Nozzle (3A), try  
loosening the Needle Adjustment  
Screw (9A). This will allow a longer  
movement for the Needle (18A) and  
allow the blocked fluid to escape  
clearing the Nozzle (3A).  
TO PREVENT  
SERIOUS INJURY  
FROM ACCIDENTAL OPERATION,  
make sure Power Switch of tool  
is in its “Off” position and that  
the tool is unplugged from its  
electrical outlet before any  
maintenance or repairs are done.  
Note: These procedures are in addition to  
the regular checks and maintenance  
explained as part of the regular operation  
of the air-operated tool.  
10. After flushing the Air Brush unit  
completely with the proper solvent:  
Lacquer thinner if you used a lacquer  
paint, water if you used a latex based  
paint and paint thinner for all oil based  
enamels, spray remaining solvent  
through the Nozzle (3A) until clear  
solvent sprays from end of Airbrush tip.  
1. BEFORE EACH USE, inspect the  
general condition of the tool. Check for  
loose screws, misalignment or binding  
of moving parts, cracked or broken  
parts, damaged electrcial wiring, and  
any other condition that may affect  
its safe operation. If abnormal noise  
or vibration occurs, have the problem  
corrected before further use. Do not  
use damaged equipment.  
NOTE: ALL paints used with this Air Brush  
are fast drying by design and can  
seriously damage your tool if they are  
NOT flushed immediately.  
11. Bleed excess air from hose and drain  
water out of the Water Drain Valve (23)  
on the Air Compressor only after turning  
2. AFTER EACH USE, wipe off with a  
clean, moist cloth. Also completely flush,  
Page 10  
For technical questions, please call 1‑800‑444‑3353.  
SKU 95630  
Download from Www.Somanuals.com. All Manuals Search And Download.  
clean and wipe down Airbrush and all  
that were used during operation.  
Ring and Inlet and Outlet Valves. Please  
note: This work should only be done by  
a qualified service technician.  
3. AFTER EVERY 500 HOURS OF  
REGULAR USE, replace Compression  
Troubleshooting  
Problem  
Possible Causes  
Likely Solutions  
Air Compressor  
will not start.  
1. No power at outlet.  
1. Check power at outlet.  
2. Cord not connected.  
1. Air connection is leaking.  
2. Air Hose is broken.  
2. Check that cord is plugged in.  
Pressure is low  
causing a weak  
spray at Nozzle of  
Air Brush.  
1. Seal air connection with plumbers tape, (only for  
non-flammable type connections).  
2. Replace air connection if necessary.  
3. Tighten Cylinder Cover screws.  
3. Screws on cylinder cover is  
loose.  
Poor atomization 1. The air connection is leaking. 1. Make sure all air connections are “air-tight”.  
when using Air  
2. Paint viscosity is too thick.  
2. Add correct solvent for type of paint you are using  
and mix thoroughly.  
Brush.  
3. The Air Brush nozzle is  
plugged or dirty.  
3. Wash the Air Brush nozzle or change it if necessary.  
Air Compressor is 1. Valve plate is unscrewed or  
1. Open the front cover and tighten all screws while  
making sure the valve plate is in the correct position.  
running well but  
no air pressure is  
being delivered to  
Air Brush.  
out of place.  
2. Retainer ring is destroyed by  
continued use.  
2. Replace the retainer ring if necessary.  
The Compressor  
motor does not  
work.  
1. Electric cord is broken.  
1. Check the electric cord and replace it if necessary.  
2. Connections inside the  
compressor are defective.  
2. Open the rear plate and check the connections.  
Repair them if necessary.  
3. The on - off switch is  
defective.  
3. Check the operation of the on - off switch and  
replace if necessary.  
Compressor  
motor makes a  
sound, but does  
not run.  
1. Exhaust outlet is totally  
blocked.  
1. Open the outlet cap and unblock the exhaust.  
2. Re-assemble making sure the cylinder valve is  
2. Cylinder valve is incorrectly  
fitted. Possibly it is mounted  
in the wrong direction.  
correctly fitted.  
The Compressor  
motor runs but is  
making irregular  
or knocking noise.  
Bearing is loose or damaged.  
Replace the bearing if necessary.  
Follow all safety precautions whenever diagnosing or servicing the tool.  
Disconnect air supply before service.  
PLEASE READ THE FOLLOWING CAREFULLY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL  
ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR  
SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN  
FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN  
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER  
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT  
PARTS THERETO.  
SKU 95630  
For technical questions, please call 1‑800‑444‑3353.  
Page 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compressor Parts List and Assembly Diagram  
Part  
Description  
Qty  
8
1
1
4
1
2
1
1
Part  
Description  
Qty  
1
1
1
1
1
1
4
1
1
2
4
5
6
7
8
9
Screw  
22 Front Cover  
Rear cover  
Rear Body  
Screw  
23 Water Drain Valve  
24 O-Ring  
25 Cylinder Block  
26 O-Ring  
27 Cylinder Head  
28 Cap Screw  
29 Filter  
Stationary Motor  
Bearing  
Rotary Motor  
Front Body  
10 Counterweight  
11 Manometer  
12 Bearing  
13 Retainer Ring  
14 Compression Ring  
17 Cylinder  
1
1
1
1
1
1
30 Handle  
1
1
1
1
1
1
31 Pressure Switch  
32 Pressure Regulator  
33 Condenser  
34 Power Switch  
35 Wire  
18 Valve Plate  
19 Valve  
1
2
36 Rubber Pad  
37 Locknut  
4
1
20 Screw  
21 Front Gasket  
1
1
38 Air Outlet  
39 Link  
2
1
Page 12  
For technical questions, please call 1‑800‑444‑3353.  
SKU 95630  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Air Brush Parts List and Assembly Diagram  
Part  
Description  
Qty  
1
1
1
1
1
1
1
1
Part  
Description  
Qty  
1
1
1
1
1
1
1
1
1A Protective Cap  
2A Air Cap  
17A Spring  
18A Needle  
19A O-Ring  
20A Valve Rod  
21A O-Ring  
22A Spring  
23A Valve Screw  
24A Valve Body  
3A Nozzle  
4A Air Cap Body  
5A O-Ring  
6A Packing  
7A Packing Nut  
8A Air Brush Housing  
9A Needle Adjustment Screw  
10A Finger Lever  
1
1
1
25A Hose Connector Nut  
26A O-Ring for Hose Connector  
27A Hose Connector  
1
1
1
11A Rocker  
12A Needle Adjusting Sleeve  
13A Needle Chucking Guide  
14A Valve Screw  
1
1
1
28A 5cc Metal Cup  
29A 7MM Wrench  
30A Metal Hanger  
1
1
1
15A Needle Chucking Nut  
16A Needle Cover (Handle)  
1
1
31A 22cc Glass Jar Assembly  
1
SKU 95630  
For technical questions, please call 1‑800‑444‑3353.  
Page 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited 1 Year Warranty  
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality  
and durability standards, and warrants to the original purchaser that this product is free from  
defects in materials and workmanship for the period of one year from the date of purchase  
(90 days if used by a professional contractor or if used as rental equipment). This warranty  
does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents,  
repairs or alterations outside our facilities, normal wear and tear, or to lack of maintenance.  
We shall in no event be liable for death, injuries to persons or property, or for incidental,  
contingent, special or consequential damages arising from the use of our product. Some states  
do not allow the exclusion or limitation of incidental or consequential damages, so the above  
limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF  
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS.  
To take advantage of this warranty, the product or part must be returned to us with  
transportation charges prepaid. Proof of purchase date and an explanation of the complaint  
must accompany the merchandise. If our inspection verifies the defect, we will either repair or  
replace the product at our election or we may elect to refund the purchase price if we cannot  
readily and quickly provide you with a replacement. We will return repaired products at our  
expense, but if we determine there is no defect, or that the defect resulted from causes not  
within the scope of our warranty, then you must bear the cost of returning the product.  
This warranty gives you specific legal rights and you may also have other rights which  
vary from state to state.  
Record Product’s Serial Number Here:  
Note: If product has no serial number, record month and year of purchase instead.  
Note: Some parts are listed and shown for illustration purposes only, and are not available  
individually as replacement parts.  
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353  
Page 14  
For technical questions, please call 1‑800‑444‑3353.  
SKU 95630  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Inc Glue Gun 243482 User Manual
Greenheck Fan Ventilation Hood RBU User Manual
Grizzly Automobile Parts H8092 User Manual
Grizzly Staple Gun H8236 User Manual
Haier Cell Phone V280 User Manual
Harbor Freight Tools Chainsaw Sharpener 93213 User Manual
Honeywell DVR HRXD16 User Manual
HP Hewlett Packard PDAs Smartphones iPAQ hx4700 User Manual
Huawei Switch M866 User Manual
Husqvarna Lawn Mower 2754 GLS User Manual