Use & Care for Irons..........................2
USA: 1-800-851-8900
840066300
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts and Features
1. Spray/Blast
2. Adjustable Steam Switch
3. Water Tank Opening
4. Spray Nozzle
5. Water Window
6. Temperature Control Dial
7. Sole Plate
8. Automatic Shutoff
Reset Button and
Power On Light
9. Heel Rest
10. Cord
To Dry Iron
1. Plug in iron.
2. Set the Adjustable Steam Switch
3. Turn Temperature Control Dial to
desired
temperature.
to 0 (the Dry
Iron position).
Allow 3 minutes
for iron to
reach desired
temperature.
4. To turn iron OFF, turn Temperature
Control Dial to O. Unplug iron.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
To Steam Iron
1. Unplug iron. Using a cup, slowly
pour 5 ounces
4. Allow 3 minutes for the iron to reach
desired temperature.
5. To turn iron off, turn Adjustable
Steam Switch to 0 (Dry Iron). Turn
the Temperature Control Dial to O
(OFF). Unplug iron.
Opening
of tap water
into water
tank opening
as illustrated.
6. Empty water from the iron following
directions in “Caring for Your Iron.”
Water
2. Plug in iron.
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.
3. Set the Adjustable Steam Switch to
desired amount
of steam. Turn
the Temperature
Control Dial to
desired setting
in the steam
range.
Features (on selected models)
Automatic Shutoff Reset Button –
After the iron has
Adjustable Steam Switch – Set the
switch at 0 to dry
been on for 1 hour,
the orange light
will go out and the
iron will automati-
iron. Move switch
to
steam or
when using blast.
cally turn off. To
Reset
Button
continue ironing,
push the Reset
Button again and
the iron will reset
for 1 hour.
Spray/Steam Selector – Turn knob to
select Spray or
Steam. On Spray,
push to release a
fine spray of water
for difficult wrinkles
in cotton or linen.
On Steam, push
Power Light – This red light indicates
the iron is
plugged in.
for an extra blast
of steam.
Power
Light
Wrap & Snap Cord – When finished
ironing, let the iron cool then wrap cord
and secure with the Wrap & Snap on
the plug.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Fabric Setting Chart
Steam Setting
To Iron
Ironing Instructions
Off/O
Nylon
Silk
Dry iron on the wrong side of the fabric.
Dry iron on the wrong side of the fabric.
Steam iron on the wrong side of fabric.
Iron with fabric still damp.
Wool
Polyester
Rayon
Cotton
Linen
Iron on the wrong side of fabric.
Iron while still damp using steam and/or spray.
Iron on wrong side of fabric while still damp.
Troubleshooting
PROBLEM
THINGS TO CHECK
Iron won’t heat.
• Is the iron plugged in and the outlet working? Check
the outlet by plugging in a lamp.
• Is the Temperature Control Dial turned to a
fabric setting?
• If auto shutoff model, is the Reset Button light
illuminated? If not, push to reset.
Water is leaking
out of the iron.
• Do not overfill the water tank.
• If steam ironing, is Adjustable Steam Dial in a steam
position, the Temperature Control Dial in the steam
range, and did the iron have enough time to preheat?
• If dry ironing, make sure the Adjustable Steam Dial is
in the DRY IRON position.
Iron won’t steam.
• Check the water level.
• Is the Adjustable Steam Dial in the STEAM position?
• Has the iron had enough time to preheat?
Iron leaves spots
on clothing.
• ALWAYS empty the water tank of the iron after using.
Water left in the tank may discolor clothing and
soleplate.
Wrinkles not
removed.
• Check Temperature Control Dial is set to correct fabric.
Iron too hot.
• Check Temperature Control Dial and set to lower
setting. Let iron cool down 5 minutes before continuing.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for Your Iron
Iron
Soleplate
1. The Water Tank of your iron should
be emptied after each use. Turn
Temperature Control Dial to O.
Unplug the iron and hold over a
sink. Slowly tilt pointed end of iron
down over sink. Water will run out
of water tank opening.
1. Never iron over zippers, pins, metal
rivets, or snaps, as these may
scratch the soleplate.
2. To clean occasional build-up on the
soleplate, wipe with a sudsy cloth.
Do not use abrasive cleansers or
metal scouring pads.
2. After iron has completely cooled,
wrap cord loosely around the iron
and store in an upright position. Do
not store iron laying flat on soleplate.
3. Always store iron upright in the heel
rest position.
Customer Service
If you have a question about your iron, call our toll-free customer service number.
Before calling, please note the model, type, and series numbers and fill in that
information below. These numbers can be found on the bottom of your iron. This
information will help us answer your question much more quickly.
MODEL: ______________ TYPE: _______________ SERIES: _________________
TWO YEAR LIMITED WARRANTY
Hamilton Beach/Proctor-Silex, Inc. warrants this appliance to be free from defects in
material and workmanship for a period of two (2) years from the date of original purchase,
except as noted. There is no warranty with respect to the following, which may be supplied
with this appliance: glass parts, glass containers, cutter/strainer, blades and/or agitators.
This warranty extends only to the original consumer purchaser and does not cover damage
from abuse, neglect, use for commercial purposes, or any other use not found in the print-
ed directions. HAMILTON BEACH/PROCTOR-SILEX, INC. EXPRESSLY DISCLAIMS ALL
RESPONSIBILITY FOR CONSEQUENTIAL DAMAGES OR INCIDENTAL LOSSES CAUSED
BY USE OF THIS APPLIANCE. Some states or provinces do not allow this exclusion or limita-
tion of incidental or consequential losses, so the foregoing disclaimer may not apply to
you. If you have a claim under this warranty, DO NOT RETURN THE APPLIANCE TO THE
STORE! Please call our CUSTOMER SERVICE NUMBER. (For faster service please have
model, series, and type numbers ready for operator to assist you.)
CUSTOMER SERVICE NUMBERS
In the U.S. 1-800-851-8900
In Canada 1-800-267-2826
KEEP THESE NUMBERS FOR FUTURE REFERENCE!
This warranty gives you specific legal rights, and you may also have other legal rights
which vary from state to state, or province to province.
HAMILTON BEACH PROCTOR-SILEX,INC.
Washington, North Carolina 27889
PROCTOR-SILEX CANADA,INC.
Picton, Ontario K0K 2T0
840066300
12/99
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|