Front Load Washing Machine
Model:slim3
1.Contents---------------------------------------------------------------------------------------1
2.Features --------------------------------------------------------------------------------------3
3.Sale points------------------------------------------------------------------------------------4
4.Specification ---------------------------------------------------------------------------------5
5.Safety------------------------------------------------------------------------------------------7
6.Installation ------------------------------------------------------------------------------------9
7.Maintenance---------------------------------------------------------------------------------11
8.Net dimension ------------------------------------------------------------------------------13
9.Names of the parts-------------------------------------------------------------------------14
10.Operational Functions------------------------------------------------------------------ 15
11.Trouble shooting---------------------------------------------------------------------------17
12.Wiring circuit ------------------------------------------------------------------------------- 24
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
FEATURES
●300mm diameter porthole, door may be open at a 180 degrees.
Facilitate view of wash process, facilitate unloading and easy to use with large port.
● Class A energy-saving,Class B washing performance
Scientific design for tub can reduce the use of water heavy during washing, consequently upgrade the energy
efficiency class to A,also use scientific washing in order to getting class B washing performance.
●Multi-gear speed controller
According to different costuming，you can select corresponding spin speed，from 400 to 1000 rpm.
●Unique gasket design featuring no residual water hidden inside.
By the unique gasket，washing machine can left no residual water hidden between outer drum and front board.
●Delay time adjustive.
According to different costuming，you can select delay time，from 0.5h to 24h.
●AQUA STOP
Using AQUA STOP inlet hose, you will never be worried about water overflow.
Sale points
One sentence for simplicity：
Tight machine body without any wasting places
Three sentences for convenience:
I.
Choose from 11 programs, convenient uses to provide you much benefit
Front-Load structured to ensure placing clothes much more facility
Humanistic design for control panel to help expedient operation
II.
III.
Five sentences for tech-support:
I.
No need to be worried because of the function of intelligent-memory
II.
Satisfied to encourage children’s curiosity because of the child-lock
Perish your trouble because of the alarm to the fault
Make you happy because of quick-wash in 29 mins
Reassure for you because of the 24hours pre-wash which may offer you washing anywhere and
anytime.
III.
IV.
V.
４
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
SPECIFICATION
Proposal
2006
New Sensor
Slim3
Front load washing machines
Product identification
1.
Description of appliance
Washing machine
Type of appliance
Supplier own brand
Supplier bar code
Mares computer code
(FS = standing, BI = built-in)
FS
EAN
EAN
TBC
-
Commercial
Brand / Model
Commercial bar code
2.
Key-Features
Energy efficiency class
Washing performance class
Spin efficiency class
Programs
A
B
C
11
5
n°
kg
Capacity
Spin speed
Noise level
Energy consumption per wash circle *
Water consumption*
(max. / optional)
rpm
dB(A)
kWh
l
1000-400/800-400
62
0.94
59
Residual dampness
(spin result)
%
63%
Spin speed selector switch
Spin speed variator
Adjustable thermostat
Drum capacity
(steps)
rpm
rpm
°C
ꢀ
(stepless)
(water temp. adjust from - to)
dry laundry / water
ꢀ
90/60/50/40
5/ 59
kg / l
Auto water level adjust (depending on volume of filled in laundry) AWL
ꢀ
Washing time (max.)
min
152(TBC)
CE / ISO 9001
TÜV/GS (Rhl.)
ꢀ
Certification's (CE / ISO 9001 / ISO 9002)
Approvals (VDE/GS / TÜV/GS / IMQ)
* EN 60456 (60°C cycle, full load without pre-wash) ꢁ= COLD
Basics data
3.
Unit dimensions
Net weight
(H x W x D)
cm
kg
85 x 59,5 x 40
63
Voltage/frequency
V/Hz
W / A
220-240V~50Hz
Input power
/
main fuse (intensity)
2000/10
Work top / removable
ꢀ/ꢀ
E
S
Control
M = electromechanical, E = electronic, F = fuzzy
S = stainless steel / Z = zinc coated
P = Plastic / S = stainless steel
Inner cylinder
Outer cylinder
Door:
P
aesthetic
(R = round, Y = big eye, Q = square)
Y
Diameter
cm
30
Outer door frame S= stainless steel / M = metal / P = plastic
Inner door G= glass / P= plastic
P
G
Detergent compartments
Removable compartment for liquid detergent
Delay timer (from - to)
n°
h
3
-
0.5-24
ꢀ
Self cleaning suds pump
Water inlet hose
Water drain
Adjustable feet
cold water / hot water
hose / -support
ꢀ
ꢀ/ꢀ
4
n°
4.
Safety systems
Auto door lock
Motor overheating protection
No heating without water
Auto water cool-down (before drain 90°C boiled water)
Water return protection
ACQUA Stop kit
ADL
MOP
NHW
AWC
WRP
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
-
Child protection
ꢀ
５
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
5.
Programs
1) Strong action /cotton cycles
2) Normal action / synthetics
3) Delicate action / wool cycles
Pre-wash / wash
Quick wash / super quick wash
Rinse / soften
Delicate / hand wash
Wool / cashmere
Soak / spin
n°
n°
n°
1
1
1
ꢀ/ꢀ
ꢀ/-
ꢀ/ꢀ
-/ꢀ
ꢀ/-
ꢀ/ꢀ
ꢀ
Drain
Easy ironing
ꢀ
Optional function keys
ON/OFF button
Delay
Extra rinse button
Spin exclusion
(additional program settings)
ꢀ
ꢀ
ꢀ
ꢀ
-
Spin reduction
rpm
High water level
Rinse hold
Child lock
ꢀ
ꢀ
ꢀ
-
Delicate
Cold wash
Load selection
ꢁ
ꢀ
ꢀ
ꢀStand for having the function
- Stand for not having the function
６
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
７
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Maintenance
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Net dimension
595CM
398CM
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Names of the part
Detergent
distribution
drawer
Top panel
Display
Selection knob
Operating
buttons
prothole
door
Door handle
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Slim3 Error Display and Troubleshooting
Error message:Door is not properly shut 20s after program is started.
Troubleshooting:
Pushing the door to Check Whether Door
is properly shut or not
Shut the door properly
N
Y
Cut off the power and then turn on again.
Check the voltage between brown wire and
red wire of door lock, is it between AC
220-240V?
Door lock is broken and need
replacing, then make sure wire is
connected properly.
Y
N
Connect the wire properly
Check if the wire connecting door lock
and PCB is loose
Y
Replace
PCB
N
Check the voltage between grey wire and
white wire of PCB, is it between AC
220-240V?
N
Error message:Drainage error, water not emptied within 4 min.
Troubleshooting:
Cut off power and water level pressure switch wire
connection, measure the resistance of 1 and 3 pin, is it
infinite? If not, it is water level pressure switch failure
and replace it. If it is, then repair and check PCB and
wire as followed.
Check if water is emptied
Y
N
Check if drain pump acts by touching
pump position
Check if drain pump or
drain pipe is jammed, and
open the filter and clean
Y
N
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Cut off the power and choose spin program to
start, then check the import voltage of drain
pump, is it between AC 220-240 V?
Y
Replace drain pump
N
The wire between
PCB and drain
pump is not
connected
properly.
Cut off power and pull out water level
pressure switch wire connection. Set spin
program to start. Check the export voltage
to drain pump, is it between AC
220-240V?between blue wire and green
wire
Y
Replace the wire.
N
Replace PCB
(Fig1)
Error message:Temperature sensor is not properly connected or damaged (display at the end of a
program).
Troubleshooting:
Cut off power and measure the resistance
NTC exist open circuit .Replace it
N
of temperature sensor by multimeter, is
it between 5-14kΩ?
Y
Check if NTC is connected properly
Connect NTC well
N
Y
Check the blue wire and black wire of NTC, are
they connected well?
Connect all wires well
N
Y
Disconnect the white wire and black wire
from PCB, and measure if the resistance
between blue wire and black wire of PCB is it
infinite?
Replace wire
Y
N
Replace PCB
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Error message :The heater may be broken
Troubleshooting:
Heater element
must be broken
please replace
it
Cut off power ,check the resistance
Of two pins of heater element by
multimenter is it between 32-35Ω ?
Y
N
Turn on power ,and set wash
mode,then start ,check the export
voltage of heater element between
12-6 and J9-9 ,is it between AC
220-240V?
PCB must be
broken, please
replace it
Y
Error message:The required water level is not reached within 8 min.
Troubleshooting:
Check if water is leaking from washer
Readjust or replace the broken parts
bottom. inlet pipe. drain pipe or other
pipe connection
Y
N
Check if tap is closed or water pressure is too
low (usual between0.2 -1 MPa)
Open the tap or wait for normal water pressure to use
Y
N
Clean inlet valve
Check if inlet valve is jammed
N
Y
Observe if the height of
drain pipe not reach 80
cm. If water level
pressures switch and
Draw out the dispenser and check if water is
entering
Y
N
the hose is leaking gas
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Turn on power, and set pre-wash mode, then
start. Check the import voltage of
electromagnetic valve by multimeter
, is it between AC 220-240V?if the hot water
can also come into dispensor..check the
voltage between the white wire and blue
wire that they are not connected
Electromagnetic valve must be broken, please replace
it.
Y
N
The wire connected PCB and inlet valve is not
properly. Please reconnect it or replace it.
Check if export voltage from PCB to
electromagnetic valve, is it between AC
220-240V that voltage between grown wire
Y
and white wire of PCB ?
N
(Fig 2)
Replace PCB
Error message:Motor speed error .it may be not properly connected or damaged.
Troubleshooting :
Connect them well and test.
Cut off power, and check if motor wire is
connected well
N
Y
Connect them properly and test.
Check if the wire of motor is connected well
with computer board.
N
Y
Pull out the motor insert string, and check the
resistance of motor speed measurer and the
winding of the motor, is it as followed?
1-3：180Ω 4-5：5Ω
Replace the motor.
N
5-6：5Ω
4-6：5Ω
Y
Replace computer board
Check the import voltage between M1 wind
and M2 wind, is it between AC 220-240V?
N
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Error message. Motor overheat protection or is damaged.
Troubleshooting:
Cut off power and check if motor wires
are connected well
Reconnect well
N
Y
Put the motor in nomal temperature about
Measure if resistance of motor winding by
ten minutes,and then test again.If the
resistance is natural, it is caused by
overheated protection.Then check and
deal with overload,abnormal voltage.If
not,please replace motor
multimeter,is it as followed? 4-5:5Ω
N
5-6:5Ω
4-6:5Ω
Y
Pull out the wire connection of motor and
computer board.Then check if circuit is open
by multimeter
Repair wires
Y
N
Turn on power and set spin mode,then
start.Check the import voltage of driving
board between red wire and red wires,
is it between 220-240V?
Replace computer
Y
board
Error message. Water level exceeds protection value.
Troubleshooting:
Clean water switch hose and air
collector
Y
Check if water switch hose and air collector
are jammed
N
Pull out water switch inserts and turn on
power, then set wash mode. While water
is entering at the position of 1/4 glass
window, check the resistance between ①
and ②, is it 0? Check the resistance
Replace water pressure switch
Y
between ①and ③, is it infinite?
N
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Replace inlet valve
Without power ,connect inlet pipe to inlet
Y
vavle,then open the tap and observe if water
is entering in dispenser
N
Replace
PCB
Y
Without starting but electrifying, measure the
import voltage of inlet valve, is it between
AC 220-240V?
Slim3 Examination & Troubleshooting
Failure:Display nothing
Troubleshooting:
Repair power supply
N
Measure the power supply ,is it exists
220V-240V AC voltage？
Y
Press the power switch
N
Is power switch on?
Y
Press power switch and check the voltage
Make sure power supply cable assembly is
connected well and then replace power
switch.
N
between two pins of power switch. Is
there 220-240V AC voltage between blue
wire and brown wire?
N
Y
Cut off power and check if plugs are connected
well by pulling the plug of PCB.
Insert the plug well and test
Y
Y
Check if power plug exists 220V-240V AC
N
Replace PCB
voltage at the import pin
Failure:no water inletting
Troubleshooting:
Is the tap shut off or the water pressure
Open tap or wait for normal water pressure
Y
too low?
N
Check if water is leaking from washer
connection, especially between inlet pipe
and tap. to make sure of no bends.
Reconnect inlet pipe.
Y
Y
N
Clean filter
Check if filter of electromagnetic valve is
jammed
N
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Choose pre-wash program and start，
Check if there is 220-240V at import pin
of electromagnetic valve
Replace electromagnetic valve
Y
N
Reconnect the wire
Y
Is
there
open
circuit
between
electromagnetic valve and PCB?
N
Replace PCB
Choose pre-wash program and start，
then check if there is 220-240V at export
pin of electromagnetic valve
N
（See fig 2）
Failure:no draining
Troubleshooting:
Adjust the height of drain pipe to
80-100 cm
Is the height of drain pipe too high?
Y
N
Turn filter anticlockwise，open and check if
Clean and tighten filter clockwise.
Y
filter is jammed
N
Arrange hose and clean
Check if hose connecting cylinder to pump is
Y
bent or jammed
N
Turn on power and choose spin program to start.
Measure if import voltage of drain pump is
220-240V
Replace drain pump
Replace the wire.
Y
N
Cut off and check if the connection between
Y
drain pump and PCB is open
N
Replace
PCB
Turn on and choose spin program to
start. Measure if export voltage of PCB to
drain pump is 220-240V
（ See fig 1）
N
Failure :abnormal noise and vibration
Troubleshooting:
Is the pack screws dismantled?
Dismantle the screws
N
Y
Clean
Y
Is there foreign material in the washer?
Y
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Adjust adjustable feet
N
Is washer in balance?
Y
Replace it
Y
Y
Is belt loose or worn?
N
Are the screws of counterweight and
motor loose?
Fasten them
N
Dismantle triangle and check
the bearing .If it is
broken, replace it.
Remove belt and turn belt pulley by
Y
hand, and then check if there is different
N
Replace motor
Y
Turn on power and set spin program,
then start，check if there is different noise
from motor
Failure:water leaking
Troubleshooting:
Check if water is leaking from the inlet pipe
Readjust it.
Y
or the tap
N
Replace drain pipe
Remove clothes
Is drain pipe broken？
Y
N
Check if there is foreign material nipped
between cushion of sight window and
sight window
Y
N
Check if all tubes and tie-in is leaking
water, including the connecting of tube
and valve, dispenser, tube and
dispenser ,outer cylinder-cushion of sight
window-hose and outer cylinder, drain
pump and gas valve
Reassemble or repair
Y
N
Replace cushion of sight
window
Y
Is cushion of sight window broken?
N
Replace outer cylinder
Is water leaking from outer cylinder?
Y
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Wiring circuit
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Load Washing Machine
Model:slim3
Sincere Forever
Group
Industrial Park, No.1, Road
266101, Qingdao,
China
23
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Halfords Cyclometer 151640 User Manual
Hamilton Beach Cookware 840152602 User Manual
Hans Grohe Plumbing Product 40518000 User Manual
Heartland Range HCBMR19L WHT User Manual
HP Hewlett Packard Laptop 1100 User Manual
HP Hewlett Packard Projector MP3800 User Manual
Huffy Games 89135 User Manual
Humminbird Fish Finder LCR 40ID User Manual
Hypertec Computer Drive Z12658ZHY User Manual
Impex Home Gym WM PRO User Manual