Haier Washer XQSB60 JN User Manual

Environment-friendly double-driver  
automatic washing machine  
User's manual  
This manual is for  
XQSB60-JN  
Please read this manual  
carefully before using.  
0030806318B  
Retain it for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of the parts  
Water inlet valve  
Top lid handle  
Top lid component  
Water absorption  
cushion  
Attachment block  
(2 pieces)  
Inner cover component  
Detergent box  
Lint filter(2 pieces)  
Control panel  
Outer tub cover  
Softener inlet  
Balance ring  
Liquid bleacher  
inlet  
Inner tub  
Pulsator  
Front control board  
Handle(2 pieces)  
Front door  
Cabinet  
Fixed leg (3 pieces)  
Back cover  
Cabinet base  
Drain hose  
Adjustable leg  
Decorative board  
Adjustable leg film  
Meaning and description of the symbols  
Contents marked with that symbol are related to the  
safety of the product and the personal safety of the  
users. Please operate in strict conformity to the contents,  
otherwise it may cause damage of the machine or  
injure the personal safety of the user.  
Warning sign  
Contents marked with that symbol are actions forbidden  
to perform. Performing of those actions may result  
in damage of the machine or injure the personal  
safety of the user.  
Forbidden sign  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety precautions  
In common usage of the washing machine, the power  
Please insert the power cord into special receptacle  
with rated voltage. Be sure to use single-phase three  
pins receptacle. Ensure the earthing prong of the  
power receptacle is earthed reliably. Use leakage  
protector if possible.  
plug shall be ready to be pulled or plugged with hand.  
Be sure to pull the plug off and close the water faucet  
when occurring power failure, delivering the machine,  
setting the machine idle or cleaning the machine. Do  
not plug or pull the power plug with wet hand.  
Do not bend, stretch, twist, bind the power cord by force, or reform it.  
Do not pressor clamp it with heavy items. If the power cord and power  
plug are bad, or the receptacle is loose, be sure to have it replaced by  
the technicians ofour special shopor our agent, or the after-salesservice  
department to avoidany risk. Keep the prong of the power plugclean. If  
dust is foundon the powerplug, please wipeit off withdry cloth.  
In case the washing machine is installed on ground  
with carpet, be careful not to block the ventilation hole  
with carpet.  
Do not use water with temperature higher than 50  
The ventilation  
holes at the bottom  
Do not put the machine at damp place like the  
bathroom. Never wash it with water. Do not  
put wet laundries on the control panel coating.  
Do not wash water-proof laundry like the raincoat,  
bike covers etc. To avoid abcommon vibrations in  
spinning and damages to the laundries.  
Do not let the machine share one receptacle with other  
electric appliances. If the power plug is damaged, or  
the plugging into the receptacle is loose, do not use  
the plug any more.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety precautions  
Do not put hand into the rotating tub. It is dangerous  
even if the rotation speed is slow. Take special care of  
the children. Keep children away from the washing  
machine to avoid them climbing on.  
Do not decompose, repair or alter the machine by  
yourself.  
Do not put any hot or heavy items (such as the  
kettle with hot water) on the washing machine.  
Do not wash laundry with volatile materials  
(such as thinner, petrol etc.).  
Benzene  
Keep the machine away from direct sunlight and  
heat source like the heater.  
The handicapped or Childrenwithout care shall not  
use the machine.  
Please keep the lint filter in good  
condition, and install it to proper  
To protect your laundries and washing machine,  
please take out all of the coins, buttons, sand, hairpin  
and other foreign materials before washing.  
Install  
position during washing. If  
the lint filter is lost or damaged,  
Dismantle  
please contact the local after-sales  
service department of our company.  
Please check if the water faucet is open, and if the connection of the water inlet pipe is proper before washing.  
Please put down the drain hose before washing.  
It is suggested to use foamless washing powder.  
Please don't use the washer in the environment below 0  
if the washer has been stored below 0  
please  
be sure to ensure the washer is placed under the room temperature for 24 hours and then use otherwise the  
washing effects may be lowered or the washer may be damaged.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and adjustment  
Please install and adjust the machine according to the requirement of the manual.  
It is very important to your security and correct operating the machine.  
Install the inner cover component  
1.Open the top lid of the washing machine.  
Outer tub cover  
2.Put the inner cover component on the outer tub cover,  
aiming the inner cover shaft to the installation hole of the  
corresponding outer tub cover shaft groove.  
Outer tub cover  
shaft groove  
Inner cover shaft  
Inner cover  
3.Firstly insert the inner cover shaft of one side into the  
corresponding outer tub cover shaft groove, then push  
the another inner cover shaft into the corresponding  
outer tub cover shaft groove. Please install to designated  
position to guarantee there are no dropping or abcommon  
sound in opening and closing of the inner cover, and the  
operation shall be smooth. Do not dismount the inner  
cover component after washing.  
Right hand  
Left hand  
Install the bottom plate  
After opening the package, please lean the washing  
machine gently down on soft items (like towel cloth,  
blanket, etc.). Install the bottom plate to the bottom  
of the machine with four screws by a cross screwdriver,  
then lift the machine up gently.  
Front  
Back  
See to the figure:  
Bottom plate  
Screw  
Soft object  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust the Installation position  
The washing machineaway from wallshould be overrun20mm. The largestallowable slope ofthe  
shank base ofthe machine is1 .The slanting orrough ground willresult in unstablerunning or  
stoppage of themachine. Please adjustit with following methods:  
Confirm it's horizontal:  
Hang the lead line to check if it is  
horizontal.  
Adjust the adjustableleg:  
1 .Totwist the adjustableleg, please firstlift up the  
side of theleg slightly,loosen the adjustablenut,  
the adjustable nut  
and twist theleg.  
Fasten  
Loosen  
High  
the adjustable feet  
2 . Afteradjustment, fasten thenut.  
Low  
Usage the drain hose  
The drainage shall be smooth with the drain hose.  
1.The height of the drain hose shall be less than 10cm,  
or the drainage will not be smooth, and cost such long  
4.If extra drain hose is needed, please make separate  
purchase. The inner diameter of the extra hose shall  
not less than 30mm, and the length shall not exceed  
1.5m.  
time that the machine may stop at mid way.  
2.Do not step on or press the drain hose.  
>
30mm  
<10cm  
<1.5m  
3. If the drain hose is too long, cut it at mid point. To make  
smooth drainage, cut the front end of the hose slantingly.  
5.If the extra hose is too long,cut it either at  
A or at B point.  
B
A
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Install the water inlet hose  
1. Attach the water inlet hoses to the water faucet. Using pliers, tighten  
the coupling. ( As figure 1)  
NOTE: Do not over tighten. Damage to the valves can result.  
2. Connect the other ends to the water inlet valve .  
( As figure 2)  
Jointer of the water inlet hose  
Figure 1  
Jointer of the  
water inlet valve  
Figure 2  
Water absorption cushion  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Check the connection between the jointer of  
the water inlet hose and the water tap  
1.Swing the hose gently to confirm if it is fastened stable.  
2.After installation, open the faucet to check if it leaks.  
3.Do not bend the hose with overstrain.  
4.Before each usage please check if the connection  
between the jointer of the water inlet hose and the  
water faucet, and the installation of the water inlet  
hose are firm, so as to prevent dropping from  
improper installation position.  
Take down the water inlet hose  
1.After using, Closethe water tap.  
2. Pull off the water inlethose from thewater tap and washer  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Preparation before washing  
Preparation before washing  
1.Connect the water inlet hose.  
2.Confirm that the washing machine is earthed  
reliably . Then insert the power plug into the  
receptacle. Do not connect the earth terminal  
to the gas pipe and tap water pipe.  
4.The ground inclination or unevenness may cause  
the washer operating not steadily or cause noise,  
please set level the washer.  
Pay attention to followings before washing the laundries  
Confirm if there's  
special requirement Take out the coins , and zippers.  
for the laundries. sand, hairpins etc.  
Clear the pocket.  
Fasten the buttons The quantity of the When the pulsator is  
laundries shall not running ,the buttons of  
exceed the rated  
value. The big  
the laundries may cause  
noise. For the sake of  
laundries like the discretion ,please put  
jeans shall be put  
in loosely.  
the laundries with  
buttons into other  
laundries.  
a. Check if the laundries are applicable for washing with machine.  
B. Divide the laundries that are not colorfast from other laundries.  
c. Put those laundries difficult to absorb water into water with hand.  
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,  
please apply detergent in advance, which can make it easier to remove the soil.  
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.  
f. Do not put those laundries polluted by chemicals directly into the washing machine.  
2 The musts in washing  
The capacity of washing of the machine refer to the largest weight of the standard laundries under dry  
condition that can be washed in one time.  
The thickness ,size , type of the cloth will influence the actual washing capacity. It is suitable to put in  
reasonable amount of laundries and the laundries can be turned round in washing for one time washing.  
It is suggested to use foamless washing powder.  
Do not select high water level for small quantity of laundries ,so as to avoid splashing of water.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Usage of the detergent  
How to use the softner  
The usage and dose of the softener as per the specifications of  
softener.  
Before washing put the softener into the filling entrance(can be found on  
the balancing ring by rotating the inner tub, as illustrated in the left  
drawing, please refer to P1 graphics) The softener will put into the  
washer when rinsing.  
When choosing the No washing powder  
program the usage of softener or bleacher  
is same as using detergent.  
After the softener is put in, please don't place for a long time otherwise  
softener may solidify and cause flowing not smooth.  
When the washer in spin process please don't push "START/ PAUSE "  
button for fear that the softener is put in earlier, which affect the effects.  
Please do not use softener in the following cases  
Selected rinsing times greater than two  
Softener  
inlet  
SOFTNER  
Choosing rinse/spin two-in-one program.  
How to use the bleacher  
Fill water to decided level .Dilute the bleacher with container.  
Pour it slowly into the washing tub.  
Avoid using bleacher on laundries with color or pattern as  
they are prone to lose color.  
When " No washing powder " button not  
selected for using washing powder program  
please determine the consumption of washing  
powder as per the operating instruction of  
washing powder, clothes load and dirtiness.  
When selecting "No washing powder" function  
if add a small quantity of detergent the clothes  
will be washed cleaner.  
The bleacher shall not touch the laundries directly.  
Refer to the user's manual for the usage and quantity of the  
bleacher.  
For powder bleacher, please dissolve it before use.  
Washing powder inlet  
How to use the washing powder  
When selecting reserve wash or fuzzy program, put the detergent into  
filling entrance.  
Directly dissolved in the machine (not applicable for fuzzy program and  
reserve wash)  
1.Fill small quantity of water select the smallest water level  
.
2.Add the wash powder. Run for 30 seconds to dissolve it completely.  
3.Put in the laundry. Select suitable water level.  
Detergent box  
The instant dissolving of the washing powder:  
1.Prepare warm water of 30 and a container.  
2.Add the wash powder while stirring to fully dissolve it.  
In selecting the posthaste program, it is suggested to adopt liquid  
detergent instead of washing powder to guarantee the washing effect.  
Put in the proper quantities detergent according to the water level and the  
laundries quantities.  
Washing powder with poor quality or long time storage maybe caked.  
Please pay attention to cleaning the detergent box in time.  
4 Put in the laundries  
5 Close the top lid  
Besides drainage if opening the top lid the washer will stop and give an alarm.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Use the operation buttons  
a. Description of the function of buttons  
Mode and meaning of the indicators  
Digital tube  
During sensing, it displays  
Off  
During operation of programs, it displays there mained time  
(minute) or remained times of the corresponding procedure  
On: indicate the program about to run, or indicate the  
selected mode  
No washing powder button  
Push the button to set the wash function.  
If "no washing powder " function is activated,  
the "No washing powder " indicator is on.  
You can then do washing without adding  
detergent into the inner tub. The max laundry  
volume is 5.0kg. The max water level is 8.  
If "disinfect" function is activated, the "disinfect"  
indicator is on to execute disinfecting function.  
If "no washing powder " function is not activated,  
the "no washing powder " indicator is off.  
The programs will require detergent.  
No Washing Powder  
Disinfect  
In "gentle" program, the "no washing powder"  
button will not respond. Special detergent is  
required.  
NO WASHING POWDER  
WASH  
RINSE  
SOAK  
Wash button  
Soak button  
Rinse button  
Push the wash button to set the  
wash procedure.  
Push the soak button to set the  
soak procedure.  
Push the rinse buttontosettherinseprocedure  
During jean standardandcommonprograms, push  
the rinse button to set different rinse times  
( 0, 1, 2, 3, 4times)  
During cotton , silk programs, pushtherinse  
button to select rinse procedure, but the rinsetimes  
cannot change.  
During quick, posthaste, gentle programs, push  
the rinsebutton , thespin procedure have no reaction.  
During standard program, themachine issetto save  
water program. Ifyoupushthe rinse buttonbefore  
starting operation, itwill change to water storagerinse  
program.  
During common, standard jean  
programs, push the wash button  
to set different wash time :With  
detergent: 0-25min Without  
detergent: 11-35min.  
During common ,standard ,  
jean push the soak button to  
set different soak time (10, 20,  
30, 40 minutes).  
During cotton programs, push  
the soak button to select soak  
procedure, but the soak time  
can not change.  
During cotton , silk programs,  
push the wash button to select  
wash procedure, but the wash  
time cannot change.  
During quick , posthaste,  
gentle, silk programs, push the  
soak button, the machine have  
no reaction.  
During quick, , posthaste,  
gentle programs, push the wash  
button the machine have no  
reaction.  
Remarks: For those large laundries  
with high water absorption capability  
such as pillow, bedspread, coat etc.,  
Please select water-storage rinse  
program to avoid splashing.  
If the "no washing powder"  
function is activated, the wash  
time will increase for 10 more  
minutes.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sta  
rt/P  
ause  
but  
ton  
Reserve/remain time indicator digitron  
During sensing, it displays --  
During reserve procedure, it displays the remained reserve time (in  
hours)  
During operation of programs, it displays the remained time (minutes).  
If the remained time exceeds99 minutes, it adopts A at tens place to  
After the power is switched on, push it to  
start the machine  
During working, push it to pause working.  
During pause, push it to resume working.  
represent 100 minutes,  
represents103 minutes.  
b
to represent 110 minutes. For instance, A3  
In case of abcommon phenomenon, it displays  
the abcommon symbol (see to Page 16)  
Page16  
Power On/Off button  
Push the POWER button to switch  
on the power.  
When the power is on, push it  
again to switch off the power.  
Push the POWER button to switch  
on the power.  
If the start/pause button is not  
pushed, the washing machine will  
automatically switch off the power  
after 5 minutes.  
Time remained  
(minutes)  
STANDARD  
COMMON  
QUICK  
COTTON  
SILK  
GENTLE  
POSTHASTE  
JEAN  
Reserve  
(hours later)  
POWER  
ON/OFF  
START  
PAUSE  
RESERVE  
WATER LEVEL  
PROGRAM  
SPIN  
Prog  
ram  
selec  
tion b  
utton  
Following automatic programs are available for selection  
Program  
Applicable situation  
Water  
leve  
l butt  
on  
Spin button  
common  
Quick  
Common washing  
The washing machine can detect the laundries  
automatically. After detection, it will set the water  
level to suitable value among 4, 6, 8,and A  
automatically.  
You can also set water level by yourself. After the  
machine is started, it will not set water level  
automatically. You shall push the start/pause  
button to make new setting.  
If there's water inside the tub, the machine cannot  
detect the laundries and will display water level 6 .  
If wet laundries are put in, it may display water level  
10 . You must set suitable water level by yourself.  
If posthaste program is selected, it will display  
water level 3 . When water level 1 is reached in  
water filling, it will perform washing while filling  
water. When water level 3 is reached, it  
will change to common washing.  
Push the spin button to set  
the spin procedure.  
Fast efficient washing for common laundries  
Super quick wash of the laundry under 1  
kg with light soil  
Posthaste  
Jean  
During common, jean,  
standard programs,  
push the spin button to set  
different spin time (from 0  
to 9 minutes)  
Washing the relatively big and thick laundries  
Standard water saving washing  
Washing the cotton textiles  
Washing the silk textiles  
Standard  
Cotton  
Silk  
During cotton , silk  
Washing for laundries with particularity  
care  
programs, push the spin  
button to select spin  
Gentle  
procedure, but the spin time  
cannot change.  
During quick ,posthaste  
gentle programs, push the  
spin button, the machine  
have no reaction.  
During operation of wash and rinse program, you  
can push down the water level button to add water.  
When you release the button, or it reaches the  
overflow water level, the machine will stop adding  
water.  
The water level decided may be different from actual  
value because of the different moisture level of the  
laundries.  
Reser  
ve bu  
tton  
Push this button can select washing closing time  
range of choice for 2 ~ 24 hours.  
After reservation starts up after hold "RESERVE "  
button by hand can display reserving status.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
b.Steps of using the operation buttons and description  
of the steps  
ime remained  
T
(minutes)  
COMMON  
QUICK  
STANDARD  
COTTON  
SILK  
No Washing Powder  
POSTHASTE  
GENTLE  
JEAN  
Reserve  
(hours later)  
Disinfect  
START  
PAUSE  
POWER  
ON/OFF  
NO WASHING POWDER  
WASH  
RINSE  
RESERVE  
WATER LEVEL  
PROGRAM  
SPIN  
SOAK  
1.Push the "POWER ON/OFF " button to switch  
on the power.  
POWER  
ON/OFF  
2.Push the "PROGRAM" button to select  
suitable automatic program  
PROGRAM  
After switching on the power, the machine will set common program automatically. To select other  
automatic program, push the "program" button till the relative indicator is on. Refer to the "program  
button" on Page 11 for the selection.  
For instance: select "posthaste"program for laundries with small  
Page 11  
quantity and light soil.  
In selecting the common, standard program,  
COMMON  
QUICK  
STANDARD  
COTTON  
SILK  
the machine will execute fuzzy program to select  
water and wash time according to the cloth and  
weight of the laundries. The full procedure is  
controlled automatically.  
POSTHASTE  
JEAN  
GENTLE  
3.Push the "NO WASHING POWDER " button to select suitable function.  
Push the "no washing powder " button till the relative indicator is on. Refer to the "program" button  
on page 10 for the selection.  
When"No washing powder" indicator lamp is not on it is the  
program for using the washing powder.  
WASH  
RINSE  
SPIN  
SOAK  
4.Push the "SOAK" , "WASH", "RINSE", "SPIN"  
button to select suitable procedure.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After switching on the power, the washing machine will set to common program including"wash, rinse,  
spin "automatically. To select other procedures, push the "soak", " wash", " rinse" or "spin" button  
to select the time of soak, wash and spin, and the times of rinse. After switching on the power, if you  
push one of the button among "wash", "rinse"and"spin", the digitron of the former procedures will  
turn off automatically. The former procedures will not run. For instance: after switching on the power. If  
you push the "spin" button first, it will execute spin singly after starting.  
Attention  
Even there's no water in the tub, a certain period is  
required before spin starting.  
Do not use the soak program for the woolen textiles.  
Separate the laundries that are not colorfast from  
other laundries in washing.  
When high water level is selected, the pulsator will rotate  
discontinuously when the water level reaches 1.  
The soak procedure can work in cooperation with automatic programs like common, jeans, gentle and  
cotton. There is intermittent pulsator stirring during soak.  
5.Press " WATER LEVEL "button,  
select suitable water level  
WATER LEVEL  
After switching on the power, the washing machine will execute fuzzy program automatically to detect the  
cloth. After defection, it can set the water level automatically. To select other water level, first push the  
"start/pause" button, then push the "water level" button to set the water level. Refer to "water level button"  
in page 11 for selection.  
Page 11  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.Push the "RESERVE" button to select suitable reserve wash program  
RESERVE  
After switching on the power, the reserve program is set to off mode automatically. If you need to set the  
washing procedure to be finished at reserved time, please push the " reserve " button to set the reserve  
wash program. Refer to reserve button in Page 11 for selection.  
Page  
Confirm the operation of reserve program  
When the "reserve" function is activated, the indicator light of the program you have set  
will be off. The "reserve (hour)" and "time remain" indicator lights will be on. During  
reserve procedure, push the "reserve" button to display the reserve mode.  
To change the running program or cancel the reserve setting, you  
need to switch off the power and make new selection.  
the washing will be finished after 18 hours.  
7.Push the "START/PAUSE" button  
START  
PAUSE  
7 Finish washing  
After finishing wash it'll be off automatically.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 Disposal after washing  
Please first pull off the power plug from the receptacle before cleaning.  
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence  
your using the machine.  
If the tap water quality isbad, it can generate scale attachedonto the water injection box and filling entrance  
of outer tubcover. When using, please scouroff the scalewith wiping rags dipping with an amount of  
detergent or abstergentto prevent theclothes from contamination.  
The lint filter must be used during washing.  
The detergent boxshould be dismantledand washed  
by water.  
It must be cleaned in time after each using  
1.The method of dismantle: Push it up aslant and gently.  
The installing and dismantling method of lint  
filter as follows:  
2.The method of install : install it upwards and aslant and  
push it in .  
Press down elastic trip at upper end of lint filter to  
make the claw of elastic trip relieving from the filter  
cover and pull lint filter outward. Insert lower end of  
lint filter into the filter cover and push upper end into  
filter cover and secure to fit on lint filter.  
After washing, dismantlethe lint filterand take  
down back coverof filter toclean off thelint.  
Lint filter  
Filter cover  
Lint filter  
Dismantle  
Dismantle  
Install  
Lint filter cover  
Install  
Install and dismantle the lint  
filter cover  
Install and dismantle the lint filter  
Dismantle  
Install  
Note: after installation check whether theedges  
on both sidesof filter isin flush withthe filter cover  
or the filterfalls out byshaking slightly toavoid the  
fallout due tofilter not installedin place.  
The filter screen of the water inlet valve is likely to be  
blocked by foreign materials and influence the water  
inlet.  
If the cabinet is dirty, wipe it with wet cloth  
Do not flush it directly with water.  
Wipe it with neutral detergent.  
Please clean it with brush every two months.  
Do not wipe it with thinner, petrol, alcohol etc.  
er  
Petrol  
inn  
Th  
Alcohol  
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).  
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.  
3.Be sure to pull off the power plug before maintenance.  
4.Hang up the power cord and drain hose.  
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time  
(about 1 hour), then close the top lid.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble-shooting Answer to question  
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns  
sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special  
maintenance department or after-sale service department of our company. Do not repair it by yourself.  
Phenomenan  
The reason  
The top lid is opened during reserve  
procedure.  
How to settle  
The digitron displays E0.  
Close the top lid.  
Put down the drain hose. Open and close the  
top lid once.  
Is the drain hose put down?  
Is the drain hose blocked?  
The drainage cannot work, or is too slow.  
The digitron displays E1.  
Clean the foreign material. Open and close  
The top Lid Once.  
It stops running in midway. The digitron  
displays E2.  
The top lid is not closed.  
Close the top lid.  
Reorder the laundries. Close the top lid.  
Place the machine horizontally. Open  
and close the top lid once.  
The safety switch acts, and the  
spinning cannot work. The  
digitron displays E3.  
Are the laundries put slantingly?  
Is the machine slanting?  
Open the water tap. Push the start/pause  
button once.  
Clean the water inlet valve then push  
the start/pause button once.  
Open and close the top lid once..  
Is the water tap opened, or is there water  
supply failure?  
Is the water inlet valve blocked?  
Is the water pressure too low?  
The water filling does not work, or is  
slow. After about 30 minutes later,  
the digital displays E4.  
Please contact the after-sales  
service department.  
The water level sensor is bad.  
The digitron displays E6.  
The digitron displays EE.  
Open the water tap. Push the start/pause  
button once.  
Clean the water inlet valve then push  
the start/pause button once.  
Is the water tap opened, or is there water  
supply failure?  
Is the water inlet valve blocked?  
Please use it when there's power supply.  
Insert the power plug tightly.  
Fill water to the preset position.  
Is there power failure?  
Is the power plug inserted tightly?  
Is the water level reached preset position?  
Not wash  
The machine does  
not act  
Is the power plug inserted tightly?  
Is the top lid closed reliably?  
Are the laundries set flat?  
Insert the power plug tightly.  
Close the top lid.  
Set the laundries flat.  
Not spin  
Adjust the machine to be even  
Reorder the laundries and close the top lid.  
Remove the foreign materials.  
Is the machine slanting?  
Are the laundries put slantingly in spinning?  
Are there any foreign materials?  
There's abnormal sound  
inside the machine  
The water tap leaks  
Is the screw of the jointer of water  
inlet hose loose or awry?  
Fasten the screw of the jointer properly.  
Common phenomena  
Explanation  
Phenomena  
* The spinning is intermittent when it starts  
* The wash procedure pauses.  
* Balance the laundries to avoid slanting.  
* The cloth sensor is detecting the cloth. It will start adding water  
after about 48 seconds.  
* The program is setting the drain time. A certain period is needed  
before it starts spinning.  
* Select Spin program, but it doesn t work.  
* It is to avoid splashing during water filling.  
* The pulsator pauses during washing, rinsing or adding water.  
* There may be some water flowing out of the drain hose in the first  
use of the machine.  
* It is the water remained in the performance inspection by the factory.  
* When selecting " No washing powder " function, what is expelled  
from the drainpipe is disinfector during water filling, which can  
sterilized the gully and wiping rags, etc.  
* When selecting " No washing powder " or " Disinfect " function,  
there is a small quantity of water flowing out of the drainpipe  
during water filling.  
* When selecting " Disinfect " function, what is expelled from the  
drainpipe is decontaminating water during water filling, which  
clean the gully and wiping rags, etc.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Packing list  
Name  
Quantity  
One  
User's manual  
Components of the  
water inlet hose  
One  
One (Between the upper cushion of the washing machine  
package and the upper seal of the package carton)  
Bottom plate  
Four  
One  
Tapping screws  
Inner cover  
component  
Environment-friendly  
double-drive automatic  
washing machine  
One  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specification  
1/18L 2/24L 3/29L 4/34L 5/38L  
6/42L 7/46L 8/50L 9/54L 10/59L  
Water level/Water quantity(about)  
Injection pressure  
~
0.03MPa 1MPa  
This washer can run for tenyears (equivalent times)if using the no washing powder  
function and running three times weekly. After running up tothe above number  
this washer can still be used as a common double-driver washer.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Haier Flat Panel Television HLA19 User Manual
Haier Flat Panel Television LE46F2280 User Manual
Hamilton Beach Water System SA HB 40 DB CERT User Manual
Harman Kardon Stereo Amplifier HK 970 User Manual
Hasbro Games Telephone Fun Smart Sticks User Manual
Honeywell All in One Printer 3580 User Manual
Husqvarna Blower 953210103 User Manual
IBM Laptop 92P1559 User Manual
IBM Network Card LPCI COM232 4 User Manual
IKEA Microwave Oven MW6 User Manual