XQG50-600TXB
XQG50-600SW
Automatic Drum Washing Machine
Table of Contents
Before using
Names of Parts--------inside front cover
Matters Needing Attention------------1-3
Installation--------------------------------4-5
Control Panel-------------------------------6
Operational Functions----------------6-7
During using
Program Selection------------------------8
Preparation---------------------------------9
Washing Methods--------------------10-11
Maintenance
Maintenance -----------------------------12
Trouble Shooting------------------------13
Technical Specification----------------14
Wiring Circuit-----------------------------15
0020502333
Download from Www.Somanuals.com. All Manuals Search And Download.
Matters Needing Attention
==ꢀ=Safety
2. Hold the plug and not the electric cable
when unplugging the washing machine.
1. A separate earthed socket is required
for the power supply. After installation of
the washing machine,the power plug
should be accessible during the normal
wash.
3. Fuses in the power circuit should be rated
for 15A. Refer to a washing machine techni-
cian or a Haier designated service point for
power cable replacement.
4. For your safety, dry hands before touch-
ing the washing machine and wear appropri-
ate footwear .
5. Do not use flammable detergent or dry
cleaning agent; do not use flammable
spray in close vicinity to the washing
machine; do not remove or insert the plug
in the presence of flammable gas.
6. The door of the washing machine will be-
come hot during the water heating process.
Avoid contact with the door during the heat-
ing process. For safety, keep children away
from the washing machine.
7. Do not allow children play with the packing materials after unpacking.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Matters Needing Attention
Wiring Circuit
9. The washing machine should be place in
a well ventilated area maintaing a space
between walls or furniture.
8. The washing machine must not be used in
the open or in area of high moisture as water
droplets may form on electrical components,
Air dry the appliance if the washing machine
components become wet.
10. Keep away from heat sources and direct
sunlight to prevent plastic and rubber com-
ponents from aging.
11. During installation, ensure that the electric
cable is not trapped by the washing machine and
avoid damage to the electric cable.
Dear customer, For the machine and your own
security, DO NOT REPAIR IT BY YOURSELF!
DO NOT USE THE WASHING MACHINE
WHICH SOME PARTS ARE LOST!
I1: Power Switch
EVC: Hot Water Valve
EVP,EVL: Cold Water Valve
P1,P2: Pressure Switch
THR: Adjustable Thermostat
D: Drain Pump
I2: Economic Wash Switch
I3: No Spin Switch
TM: Timer Motor
==ꢀ=Use
2. After turning the power off, turn the pro-
gram knob clockwise to set washing
program.
1. Make sure that the washing machine is
securely connected to the water supply,
take the necessory precautions or contact
the local service center if the connection
is poor or there is a water leakage.
H: Heating Element
C:Capacitance
S,W:Motor
2
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Matters Needing Attention
Technical Specification
4. Do not wash foam rubber or similar sponge
materials.
3. Never place heavy objects ,a heating
applianceor a water container on the top panel
of the washing machine.
Model
Item
XQG50-600TXB/XQG50-600SW
220V~(50Hz)
10
Power supply
Maximum working current
(A)
0.05 ꢀ P ꢀ 1 IPX4
Water pressure
Washing power
(MPa)
(W)
5. Before washing, do up zippers, buttons ,
laces and repair damaged areas,under-
wear or small articals should be placed
in the laundry bag or a pillowslip.
6. Do not open the detergent box during
the wash cycle.
330
650
5
Spinning power
(W)
Do not wash clothes containing wire
frames.
Max. washing load
Spinning speed
(kg)
(r/min)
600
14
Washing program
Heating power
8. After washing, turn off the tap to prevent
leakage; unplug the washing machine
and wipe clean the lower part of the port
hole.
7. The door is fitted with a self-lock device and
will not open until 2~3 minutes after the wash-
ing machine stops. Do not force the door
open. Do not open the door when water level
reaches the port hole.
(W)
1950
Size (HXDXW)
Weight
(mm)
850x550x595
(kg)
76
9. Keep the door slightly open when the washing machine is not being used. Never cover the
machine with a plastic sheet.
14
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
As shown in figure1 remove all the packing materials
Trouble shooting
The following circumstances do not constitute problems. Do not contact the
maintenance service until the problem has been confirmed.
ꢀ
(including the foam base).
Problem
Possible Cause
ꢀ Poor connection to power supply
ꢀ Power failure
ꢀ Door is not properly closed
ꢀ Machine has not been switched on
The washing machine fails to
operate
Fig 1
ꢀ Check attachments and materials.
ꢀ Water is not turned on
ꢀ Water pressure is less than 0.05MPa
ꢀ The inlet hose is kinked
ꢀ Water supply failure
Name
Operational
Washing machine does not fill
with water
Quality
Water
hose
Drainage
holder
Plastic
plugs
Qty
manual
certificate
ꢀ The program knob is not properly set
ꢀ The door is not properly closed
Model
XQG50-600TXB
XQG50-600SW
1
1
2
1
3
The water supply and
drainage do not stop
ꢀ== Check that the height of the water hose is below
80cm
ꢀ==Remove the packing screws as shown in figure 2.
The packing bolts protect the appliance from shock during trans-
portation The steps below should be followed before using the
appliance,
1. Remove the rear panel of the washing machine;
2. Remove the three packing bolts from the rear panel of the wash-
ing machine,the rubber hose and then the shock absorption chan-
nel steel;
ꢀ= Drainage hose is blocked
ꢀ= Drainage hose end is over 100cm above the
floor level
Drainage failure
3. Reinstall the back plate;
ꢀ==Some packing fixing bolts removed
ꢀ Washing machine on a uneven surface
Strong vibration during spin
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: the packing bolts and rubber hose should be kept in a
safe place for later use)
cáÖ=O
Operation stops before comple-
tion of the wash cycle
ꢀ Water or electricity failure
ꢀ===Adjusting the position of the washing machine .There are ad-
justable feet under the bottom of the washing machine. Before use,
the washing machine should be adjusted, as shown in figure 3, so
that it is level.
ꢀ= The detergent is not a low foam type
Excessive foam in the drum
Excessive detergent has been used
cáÖ=P
4
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Maintenance
Connection of water inlet hose and washing machine
1. Turn of the water and electricity supply
after every wash. Open the door to pre-
vent the formation of moisture and odors.
If the washing machine is left idle for a long
period, drain any remaining water in the
machine and replace the drainage hose.
2. Unplug the machine during cleaning and
maintenance. Use a soft cloth dampened with
soapy liquid to clean the machine case and rub-
ber components. Do not use corrosive or abra-
sive chemicals or solvents.
3. Clean the detergent compartment
regularly. For the detergent compartment
similar to figure (a), raise the compartment
slightly to remove and replace after cleaning.
4. Cleaning the Filter (once a month)
Press the lower edge of the filter compartment
cover to open; (Fig1-2)
Remove the filter by turning counterclockwise;
(Fig3)
Water drainage hose
ꢀ= The height of the terminal of the water drainage
hose should be between 80cm-100cm, the water
drainage hose must be securely placed on the clip
on the back of the washing machine.
Flash clean with running water;
Filter replacement is the reverse of removal. Cau-
tion: Attention shall be paid to ensure that the filter
is replaced correctly to avoid possible leakage.
ꢀ
ꢀ Use the water drainage support supplied as an
accessory for proper installation of the water drain-
age hose .fix the water drainage hose support with
waterproof sring.Do not use an excessively long wa-
ter drainage hose and contract the authorized tech-
nician if the water drainage hose needs to be
extended.the water drainage hose should not be ex-
tended more than250cm.(longer extension will result
in concurrent water inflow and outflow).The diam-
eter of the extension hose should be the same as
the original hose.
ꢀ
ꢀ
ꢀ
Fig (a)
fig.1
fig.2
fig.3
caution:water drainage hose must not be immersed
in water.the original and extension hoses should be
tightly connected .
5. To prevent block-
ages to the water sup-
ply or the ingress of
contaminants, clean
the water inlet and in-
l e t w a t e r f i l t e r
regularly.
6. If the machine is to be moved a distance location,
replace the vibration mounting locks which were re-
moved during installation as shown below.
Connection of power supply
Check the following items before connection to the power supply.
ꢀ==The socket conforms to the maximun power load(The maximum current load of the socket and
power supply cable should not be less than 15A)K
Replace the rubber Insert the bolts.
plugs.
Remove the back
cover.
ꢀ Power supply voltage conforms to the required value.
7. If the washing machine is left idle
for a long period turn off the water and
electricity supply and open the door
slightly to prevent the formation of
moisture and odors.
ꢀ==The power supply socket and the plug of the washing machine compatible,if they are not com-
patible ,Refer to a washing machine technician or a Haier designated service point for power cable
replacement.The washing machine should be connected to an earth before use.
ꢀ= Supplementary earth cable should not be necessary if the socket is connected to the earth.
ꢀ= Supplementary earth cable should be installed on the upper back of the washing machine
andconnected to an earth if the power supply socket has no earth connection.
Replace the back
cover.
Tighten the bolts with a
spanner.
12
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing Methods
Control Panel
4. Washing temperature Setting
C
F
D E
Set the washing temperature as required, otherwise, set at position * when heating is not
needed.
5. Selecting the function button
Select function buttons as required (refer to the directions printed on the control panel) ,
otherwise keep all the button released.
G B
A
C
F
D E
6. Washing
XQG50-600SW
Press the power button and the washing machine will automatically commence the pro-
grammed washing process.
7. End
G B
A
Wait 2-3 minutes after the washing process is finished, press the power button again to cut
off the power supply. Open the door to take out the laundry. Turn off the tap and unplug the
washing machine.
A Washing program
Turn the knob clockwise to set the desired wash program .
Caution: Turn off the power and turn the program knob clockwise
for setting desired wash program.
Additional information
B Washing temperature
Energy and water saving during wash process
1. Collect clothes for one full wash load.
2. Do not overload the washing machine.
Turn the knob clockwise to set the desired temperature.
Temperatures between 30OC-90OC can be setted , No
heating wash is selected when the knob is set at *.
3. Pre-wash heavily soiled clothes.
4. Reduce the amount of detergent or choose fast or minimal washing programs for lightly
soiled clothes dirty.
5. Choose a proper washing temperature. Only exceed 60 OC for heavily soiled clothes.
6. Do not use more detergent than required.
C Detergent distributor
Program discription are printed on the handle of the detergent
distributor,there are three detergent compartments numbered 1,2,3
Box 1: Pre-washing detergent
7. Softening agent makes clothes feel softer and easier to iron.
2
1
3
Box 2: Standard washing - extra-fast washing
Box 3: Softening agent, adjusting agent, perfume
6
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operational Functions
Washing Methods
1. Laundry loading
Reference loading
Evenly load the laundry in the
D No spin button
=ꢀOveralls
=ꢀJeans (800g)
ꢀPajamas (200g)
washing machine and then tightly
close the door of the washing
machine
Note: 1) When first using the
washing machine, let it run un-
loaded for one program to pre-
vent the laundry from being
tainted by oil or dirty water from
the washing machine. 2) Do not
overload the washing machine.
(cotton 950g)
When this button is pressed, the spin cycle will be spared but water
drain is still available. This function is useful for hard ironing fabrics,
such as chemical fiber and wool fabrics.
ꢀ=Blended
fabric clothes
(800g)
===ꢀ=Shirts
(300g)
==ꢀ=Underwear
(blended fabrics 70g)
ꢀ=Socks
ꢀ=shirt
(cotton
300g)
====ꢀ=Jackets
(cotton 800g)
(blended fabrics 50g)
E Economic wash button
ꢀ=Single bed sheets
=ꢀ Woolen blankets
(3000g)
(cotton 800g)
Pressing this button will reduce the consumption of water during
bleaching under intense wash. It is recommended that this
program be used when doing a small laundry load.
2. Use of detergent
Do not forget to reduce the amount of detergent used.
Pull out the detergent drawer, put required detergent, soften-
ing agent and bleaching agent into the corresponding boxes.
Push back the drawer gently.
Caution: 1) Do not add liquid detergent into box 1 and 2
2) For pre-washing program, detergent should
be added to both box 1 and 2; for other
programs, do not add detergent to box 1
3) Do not overuse softening agent as this may
damage artificial fabrics.
F Power button
ON
OFF
Press the button ,washing machine will working;release the button,the
washing machine will stop.
3. Washing program setting
Set the wash program correctly in accordance with the laundry load.the methods for
setting wash programs are indicated on the handle of the distributor on the washing
machine.turn the program knob clockwise to the desired program.
Caution: Turn off the power before setting the wash program.
G Power light
The light will illuminates when the power supply is connected.
10
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Program Selection
2. Water supply
1. Power supply
Turn on the tap ensure that the water is clear.
Plug in the power supply
220V~/50Hz.
Caution: Before staring the washing machine turn on the
water faucrt to ensure that the water faucet and the water
inlet hose are connected correctly and do not leak.
3. Laundry treament
4. Detergent selection
Only special low foam detergent
should be used in automatic
drum washing machine, form
blended or wool fabrics special
detergent should be used. dry
cleaning solvent should not be
used such as trichhloroethylene
or alike (caution :load the re-
quired amount of detergent only).
ꢀ=sort out clothes according to type and extent of dirt.
There are three types of clothes: cotton, synthetical and
woolen (silk) fabrics.
ꢀ separate white clothes from colored. If whites and
coloreds are combined for one load, make sure the
coloreds are colorfast.
-Remove all objects from pockets that may cause dam-
age to the machine, such as keys and coins.
-Clothing with frayed edges or yarns should be put in a
wash bag or special bag before washing.
-Repaire damaged clothing,lose buttons or damaged zips
and hooks before washing.
-Bed sheets and table ware should be loosely loaded and
not folded.
ꢀ=This washing machine is for household use and de-
signed for mechanically washable clothes. When washing,
separate unwashable clothes with reference to clothes
labels.
5.Wash Load
Woolen fabrics
1kg
Blending fabrics
2.5kg
Type
non-fade cottons
5kg
Delicat fabrics
2kg
Max load
NOTE: ” o ”means softener liquid detergent canbe added when necessary.
“ꢀ ”means detergent can be added when necessary.
“ ꢀ ”means no detergent can be added.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|