AUTOMATIC DRUM WASHING MACHINE
USER MANUAL
HW-D1270TVE
HW–D1270TVE ME
HW-D1470TVE
HW–D1470TVE ME
Power
pre-
wash
Wash Rinse Spin Dry
Temp
Silk
ON
Wash Rinse Spin
OFF
Speed
Quickwash
Wool
Spor
Quick Wash
Synthetics
Rinse
Spin
D
D
e
ella
a
y
y
E
E
x
n
x
t
t
r
s
r
a
e
a
R
hold
Dinryse
Eco
E
T
ciome
S
P
S
t
a
t
a
u
a
r
r
t
se
t/
/
r
riin
s
e
P
a
u
s
e
Cotton&Linen
Prewash
Drain
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPONENTS
Please read these instructions carefully before using this appliance. The instructions contain important information which will help you
get the best out of the appliance and ensure safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the
new owner can become familiar with the appliance and safety warnings.
ACCESSORIES
Check the accessories and literature in accordance with this list:
1x Inlet hose assembly
1x Bottom cover
AUTOMATIC DRUM WASHING MACHINE
USER MANUAL
HW–C1470TVE HW–C1470TVE ME
HW–C1270TVE HW–C1270TVE ME
HW–C1070TVE HW–C1070TVE ME
HW–C870TVE HW–C870TVE ME
p
w
s
W
h
R
s
S
i
O
F
D
l
y
E
t
s
a
R
e
E
T
m
P
S
1x User manual
1x Drain hose bracket
3x Blanking plugs
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USE
PREPARATION
PREPARING THE MACHINE
Remove all the packing materials to prevent unsteadiness, including the polystyrene base. Upon
opening the package, water drops may be seen on the plastic bag and the porthole. This is normal
phenomenon resulting from water tests in the factory.
DESCRIPTION
This diagram may be slightly different from the layout of the washing machine you have just
purchased due to technical improvements.
Power switch
Door handle
Drain hose
Water inlet valve
Power cord
Work Top
Washer door
Back cover
Control Panel
Detergent distribution drawer
Filter cover
Back cover screws
Transportation bolts
Power
pre-
Wash Rinse Spin Dry
Wash RinsSpin
Temp
Silk
ON
wash
OFF
Speed
Quickwash
Wool
Sport
Quick Wash
Synthetics
Rinse
Spin
D
D
e
ella
a
y
y
E
E
x
x
a
e
a
R
Dinryse
hold
Eco
E
T
ciome
S
P
S
t
a
t
a
u
a
r
r
t
se
t/
/
r
riin
P
a
u
s
e
Cotton&Linen
Prewash
Drain
T2
S2
S1
T1
T3
S3
Download from Www.Somanuals.com. All Manuals Search And Download.
5
SAFETY INSTRUCTIONS
BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME
DO ...
DO NOT ...
... Touch or use the appliance when barefoot or with wet
or damp hands or feet.
... make sure that the transport bolt are removed.
... Use a separate earthed socket for the power supply.
... Make sure that the plug is accessible.
... Hold the plug and not the electric cable when unplug-
... Use flammable detergent or dry cleaning agent.
... Use any flammable sprays in close vicinity to the appli-
ance.
ging the power supply.
... Make sure that the fuses in the power circuit are rated
for 15A.
... Remove or insert the plug in the presence of flammable
gas.
... Keep away from heat sources and direct sun light to
prevent plastic and rubber components from aging.
... Make sure that the power cord is not caught under or
in the appliance and avoid damage to the power cable.
... Check that hose joints and connections are firm and no
water can leak. If joints are loose or there is leakage, turn off the
water supply and repair. Do not use the washing machine until
the hoses are properly fixed.
... Allow children or infirm persons to play with the appliance
or packing materials.
... Install the appliance outdoors in a damp place, or in an
area which may be prone to water leaks such as under or near a
sink unit. In the event of a water leak allow the machine to dry
naturally.
... Place the washing machine directly on a carpet, or close
to a wall or furniture.
DURING DAILY USE OF THE APPLIANCE
DO ...
DO NOT ...
... Pull up zips and fix loose threads to prevent the items
from being entangled. If necessary, put small items into a net bag
or pillow.
... Turn off the machine after each wash program and switch
it off at the mains to save electricity and for safety. Wipe clean
the lower part of the porthole.
... Touch the washer door during the washing process - it
gets hot!
...Place heavy objects or sources of heat or damp on top
of the appliance.
... Hot wash foam rubber or sponge-like materials.
... Open the detergent distribution drawer during the wash
cycle.
... Keep the door slightly open when the washing machine is
not in use to prevent formation of odours.
... Force the washer door open. The door is fitted with a
self-lock device and will open shortly after the washing procedure
is ended.
... Let the power cord be replaced by the manufacturer, his
service agent or other accordingly qualified persons, in case it is
damaged.
... Open the washer door if the water level is visibly over
the porthole.
... Ensure that the appliance is not used by persons with re-
duced physical, sensory or mental capabilities, lack of experience
and knowledge without supervision or instruction by a person
responsible for their safety.
... Cover the washing machine with plastic cover so that
inside dampness cannot be kept in.
... Supervise children to ensure that they do not play with
the appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USE
INSTALLATION
ADJUSTING THE BOTTOM COVER
When open the shrink package,you will find a calcium plastic board
which is laid on the top of washing machine as shown in fig.1.The board
is used for reducing noise by pasting it under the cabinet when setting
as shown in fig.2
It keeps out the dampness and reduces the noise.
DISMANTLE THE TRANSPORTATION BOLTS
The transportation bolts are designed for clamping anti-vibration
components inside of the washing machine during the transportation
process.
1. Remove the back cover.
2. Remove the three bolts on the rear side and take out the synthetic
stabilisers from within the machine.
3. Replace the back cover.
4. Fill the holes left by the bolts with blanking plugs.
Note:
2.
4.
1.
3.
1.When you replace the back cover,the convexity must
face to outside, and you
have to insert the back cover from the two gaps as shown
in fig.3.
2.Keep the transportation bolts and synthetic stabilisers in
a safe place for later use.
fig.3
Adjusting the washing machine
There are adjustable feet under the bottom of the washing machine. Before use, they should be
adjusted so that the machine is level. This will minimise vibrations and thus noise during use. It will
also reduce wear and tear. We recommend using a spirit level to level the appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
INLET HOSE
1. Connect the nut on the inlet hose to the connector on the water
valve.
2. Apply inlet hose to a water tab with cold, fresh water.
Note: Use the hose-set supplied with the appliance. Old
hose-sets should not be reused.
2.
1.
DRAIN HOSE
1. Use the drain hose bracket to keep the end of the drain hose retained
and prevent the outflow of water. Don't extend the length of the drain
hose; if an extended hose is required, please consult a serviceman.
2. The height of the drainage outlet must be 80-100 cm. Fix the drain
hose to the clip at the back of the washing machine to prevent it from
dropping off.
1.
Note: The drain hose should not be submerged in water
and should be securely fixed and leak-free. If the drain
hose is placed on the ground or if the pipe is at a height
of less than 80cm, the washing machine will continuously
drain while being filled (self-siphoning).
2.
CONNECTING TO THE POWER SUPPLY
Before connecting to the power supply, check:
¬ The socket is adequate for the maximum power of the washing machine
(For safety, fuses in the power circuit should be rated for no less than 15A).
¬ The voltage should meet the requirement.
¬ The power outlet should be capable of accepting the washing machine plug.
¬ Connect the machine to an earthed socket outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USE
CONTROL PANEL
J
I
B
A
K
Power
pre-
wash
Wash Rinse Spin Dry
Temp
Slk
ON
Wash Rinse Spin
OFF
Sport
Quickwash
Wool
Speed
Quick Wash
Rinse
Spin
Synthetics
Delay
Delay
Extra
RDinryse
hold
EcoTime
Eco
Start/
Start/
Pause
Pause
Extra
rinse
rinse
Cotton&Linen
Drain
Prewash
H
G
F
E
D C
A
B
C
D
E
Program knob
Temperature button
Speed button
Start/pause button
Eco button
F
G
H
I
Rinse hold button
Extra rinse button
Delay button
Display
K
Power button
J
Detergent distribution drawer
OPERATIONAL FUNCTIONS
A
B
¬ Program knob _Select program by turning the knob .
¬ Temperature
button
_ Select the desired washing temperature (--,30,40,50, 60,90°C ) by pressing and holding down
this button. When selected, the temperature is shown on the display. Cold wash is selected when the
symbol "--" is displayed.
C
¬ Speed button _ Select the desired spin speed (0, 400, 600, 800, 1000, 1200,) by pressing and holding down this
button. When selected, the speed value is shown on the display. The washing machine does not spin
when "0" is displayed. The washing machine spins at 1200 rpm when "1200" is displayed.
D
¬ Start/pause
button
_ If you press this button, ":" will be displayed and operation will start. If you press this button during
a wash cycle, the ":" sign will start blinking and operation will pause. Press it again to resume opera-
tion. Note: After operation is suspended, the washing temperature, spinning speed
and other functions can not be reset.
Download from Www.Somanuals.com. All Manuals Search And Download.
E
¬ Eco button
_ Before a washing program, press this button to set the required washing load (1 :3-FulI), the wash-
ing machine will automatically adjust the water consumption, heating time and washing time. Users
can select the washing load as required for economical operation.
Note:1."1 :3-Full"refers to the four levels of washing load. If the laundry is more
than half of the drum content, it is recommended to select 2:3-Full: otherwise,
select 1:3-1:2 2.For"synthetics","sport" ,you can only select 1:3-1 :2-2:3.
3.Please adjust the detergent quantity according to the washing load selected.
F
¬ Rinse hold
button
_ If you press this button, the washing machine will not drain the water after the last rinsing opera-
tion, but start a soaking cycle. The indicator light goes on. To spin the laundry, press this button again.
The indicator light turns off and the program continues to the end. Note: Press only when "Prewash",
"Cotton&linen", "Synthetics" or "Rinse" is selected.
G
H
¬ Extra rinse
button
_ Press this button, the washing machine will perform additional rinses. The light turns off and the
display disappears when the extra rinse ends.
Note:Select this function when programe 1-6 or 9 is selected
¬ Delay button
_ Press the button repeatedly before starting the program to enter the time you want the machine to
be finished in, the start will delay from 0.5 to 24 hours in 30-minute intervals. This also includes the
length of the program itself, so the delay time must be longer than the program length selected.
I
¬Display
_ The display shows the washing time remaining, the selected temperature and speed, the options,
the alarm warning, etc.
J
¬ Detergent
_ Instructions are printed on the handle of the drawer.
distribution drawer Open the drawer, three compartments can be seen:
Compartment 1: Pre-wash detergent
2
Compartment 2: Detergent for programs 1 to 8
3
1
Compartment 3: Softener, conditioning agent,
perfume, and other additives.
K
¬ Power button _ Press this button to turn the machine on and off.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
USING THE
PROGRAM SELECTION
2
3
PROGRAM MODES
1
2
3
Detergent compartment for prewash mode
Detergent compartment
1
Compartment for softener and other additives
Temperature
Recommended
Laundry
Program
Maximum
Preset
40 °C
2
3
1
Preset spin speed
1000 rpm
1
¬ Prewash
-- to 90 °C
Cotton fabrics
2
¬ Cotton-
&linen
-- to 90 °C
40 °C
Cotton fabrics
1000 rpm
3
4
5
¬ Synthetics
¬ Wool
0 ° to 60 °C 40 °C
Fast colours / Medium 1000 rpm
soiled
0 ° to 40 °C
/
/
Wool fabrics
/
¬ Handwash 0 ° to 40 °C
Cotton or synthetic
/
6
7
¬ Silk
0 ° to 40 °C
/
/
/
/
¬ Sport
0 ° to 40 °C 40 °C
1000 rpm
8
9
¬ Quick wash 0 ° to 40 °C 40 °C
/
/
1000 rpm
1000 rpm
¬ Rinse
/
/
/
/
/
/
10 ¬ Spin
11 ¬ Drain
/
/
1000 rpm
/
Yes
No
Optional
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE
CONSUMPTION AND TECHNICAL DATA
CONSUMPTION TABLE
The wash cycle times are intended as a guide only. The actual time used may vary due to different water pressure, initial water tempera-
ture, etc.
MAX.
LOAD
ENERGY
CONSUMPTION
WATER
CONSUMPTION
WASHING
TIME
PROGRAM
¬ Prewash
¬ Cotton 60 °C *)
¬ Cotton 40 °C
¬ Synthetics
¬ Wool
7 kg
0.89 kWh
1.19 kWh
0.66kWh
87L
2:32 h
2:58 h
2:12 h
1:35 h
0:41 h
0:39 h
0:41 h
0:25 h
0:29 h
0:57 h
7 kg
60 L
79 L
55L
7 kg
3 kg
0.475 kWh
0.055kWh
0.017 kWh
0.03 kWh
0.3 kWh
2kg
44L
¬ Handwash
¬ Silk
3.5 kg
2 kg
44L
44L
¬ Sport
3.5 kg
3.5 kg
4 kg
34 L
34L
¬ Quick
0.37 kWh
0.147 kWh
¬ Hand wash
41.8 L
*) EN 60456 test program / Energy label program with Cotton 60 °C and max. spin speed.
TECHNICAL DATA
HW-D1270TVE/ME
HW-D1470VE/ME
Power source
220 - 240 V / 50 Hz 220 - 240 V / 50 Hz
Max. working current (A)
Water pressure (MPa)
Nominal load (kg)
Spinning speed (r/min)
Washing programs
Max. power (W)
10
10
0.03 ≤ P ≤ 1
0.03 ≤ P ≤ 1
7
7
1200
12
1400
12
2000
2000
Dimensions (HxDxW mm) 840 x 610 x 595
Net weight (kg) 72
840 x 610 x 595
72
Download from Www.Somanuals.com. All Manuals Search And Download.
12
USING THE
WASHING METHODS
PLEASE NOTE
This washing machine is for domestic use only. Do not use it for purposes other than that for
which it was designed. Follow the instructions given on the label of each garment and wash only
machine-washable garments.
POWER SUPPLY
Connect the washing machine to the power supply (220V to 240V~/50Hz).
WATER CONNECTION
Turn on the tap. The water must be clean and clear.
Note: Before use, check for leakage in the joints between the tap and the inlet hose by turning on the tap.
PREPARING THE LAUNDRY
¬ Sort out clothes according to fabric (cotton, synthetics, wool or silk) and to how dirty they are.
¬ Separate white clothes from coloured ones. Wash them first by hand to check if they fade or run.
¬ Empty pockets (keys, coins, etc.) and remove the harder decorative objects (e.g. brooches).
¬ Garments without hems, underwear, finely woven textile such as fine curtains are to be put into wash
bag (it is better not to wash them in a washing machine).
¬ Close zippers and hooks, make sure the buttons are sewn on tightly and place small items such as socks, belts, bras, etc. in the
wash bag.
¬ Unfold large pieces of fabric such as bed sheets, bedspreads, etc.
¬ Turn shirts inside out.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE
LOADING THE MACHINE
Open the washer door, put in the laundry piece by piece. Close the door tightly.
¬ When first using the washing machine, let it run unloaded for one program to prevent the laundry from
being tainted by oil or dirty water from the washing machine.
¬ Do not overload the washing machine.
SELECTING DETERGENT
The washing efficiency and the performance is determined by the quality of detergent used. Special non-
foaming detergent produces good washing results. Use specific detergents for synthetic and woollen goods.
Do not use dry cleaning agents such as trichloroethylene and similar products.
Note: Do not add more detergent than needed. Please follow the dosage recommendation on the detergent
package.
ADDING DETERGENT
Slide out the detergent drawer and put the required detergent and softening agent into the corresponding compartments. Push back the
drawer gently. (Refer to the instructions on the drawer)
Caution:
¬ For pre-washing program, detergent should be added to both compartments 1 and
2. For other programs, do not add detergent to compartment 1.
2
3
¬ Use liquid detergent according to the instructions on its package. Do not use liquid
1
detergent if the pre-wash mode or "Start delay" is selected.
¬ Do not overuse softener; otherwise, it will damage the artificial fibers.
SELECTING PROGRAM
To get the best washing results, an appropriate washing program should be selected according to the laundry type. There are instructions
on the handle of the detergent distribution drawer. Please turn the program knob to select the right program.
Power
Silk
ON
O
Sport
Quickwash
Wool
Quick Wash
SELECTING FUNCTIONAL
Rinse
Spin
Synthetics
Cotton&Linen
Drain
Prewash
Select the required options. (Refer to the "Control panel" pages 08 and 09)
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE
SETTING WASHING TEMPERATURE
Temp
Press and hold down the temperature button until the desired temperature is selected or the symbol "--"
for no water heating.
Speed
yse
d
EcoTime
Eco
Start/
Start/
Pause
Pause
SETTING SPIN SPEED
Press and hold down the speed button until the desired speed is selected or the symbol "0" is selected
for no spin. See "Operational functions" on the "Control panel" pages (08 and 09) for selecting
temperature and spin speed. It is advisable to select the recommended value.
Temp
Speed
yse
d
EcoTime
Eco
Start/
Start/
Pause
Pause
WASHING
Press the Start/Pause button. The washing machine will operate according to the pre-set programs.
The washing machine will stop operation automatically when a washing cycle ends. The "End" sign will
appear on the display. Open the washer door and take out the laundry.
pre-
Wash Rinse Spin Dry
Wash Rinse Spin
Temp
wash
Speed
Delay
Delay
Extra
RDinryse
hold
EcoTime
Eco
Start/
Start/
Pause
Pause
Extra
rinse
rinse
pre-
Wash Rinse Spin Dry
wash Wash Rinse Spin
Temp
Silk
O
O
Speed
Quickwash
Wool
rt
Synthetics
Rie
Spin
D
D
e
ella
a
y
y
E
E
x
n
x
t
t
r
s
r
a
e
a
R
hold
Dinryse
Eco
E
T
ciome
S
P
S
t
a
t
a
u
a
r
r
t
se
t
/
/
r
riin
s
e
P
a
u
s
e
Cotton&Linen
Prewash
Drain
AFTER WASHING
Turn off the water supply and unplug the power cord. Open the washer door to prevent formation of
moisture and odours. Let the door open while not used.
TIPS FOR SAVING ENERGY
1. Collect clothes for one full wash load.
2. Avoid overloading the washing machine.
3. Pre-wash only heavily soiled clothes.
4. Reduce the amount of detergent or choose the speed up wash programs for slightly soiled clothes.
5. Choose a proper washing temperature. Modern detergents can wash with very good result already in lower temperature than
60°C. Only user higher temperature than 60°C for heavily soiled laundry.
6. Follow the dosage recommendation on the detergent package to avoid using too much detergent.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE
CARE CHART
Resistant material
Delicate fabric
Bleachable in cold water
Do not bleach
Don't dry clean
Dry flat
Washable at 95 °C
Washable at 60 °C
Washable at 40 °C
Washable at 30 °C
Hand wash
Iron at 200 °C
Hung to dry
Iron at 150 °C
Dry on clothes hanger
Tumble dry, normal heat
Tumble dry, reduced heat
Don't tumble dry
Iron at 100 °C
Don't iron
Dry cleaning with any solvent
Dry cleaning with pericloride
Dry cleaning with aviation fuel
Dry clean only
Wool Seal
LOAD REFERENCE
Bed sheet (single)
Blanket
Cotton
Approximately 800g
Wool
Approximately 3000g
Approximately 800g
Approximately 800g
Approximately 800g
Approximately 950g
Approximately 200g
Approximately 300g
Approximately 50g
Approximately 300g
Approximately 70g
Blended fabric clothes
Jackets
/
Cotton
Jeans
/
Overalls
Cotton
Ladies Pyjamas
Shirts
/
/
Socks
Blended fabrics
Cotton
T-Shirts
Underwear
Blended fabrics
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING & CARE
AFTER WASHING
Turn off the water supply and pull out electricity plug after each wash.
Open the washer door to prevent formation of moisture and odours. If
the washing machine is left idle for a long period, drain the water in the
machine and replace the drain hose.
1.
2.
2.
CLEANING THE DETERGENT DRAWER
1.
Clean the detergent distribution drawer regularly.
Swing out the drawer, flush it clean with water and then replace it.
CLEANING THE MACHINE
Unplug the machine during cleaning and maintenance. Use a soft
cloth dampened with soap liquid to clean the machine case and rubber
components. Do not use organic chemicals or corrosive solvents.
CLEANING THE FILTER
Clean the filter once a month:
1.Open the bottom cover.
2.Remove the filter by turning counterclockwise.
3.Flush the filter clean with running water.
4.Replace the filter by turning clockwise and
remount the cover.
Caution:
1.
2.
4.
1.The filter must be in place, or it may lead to leakage.
2.Place a container under the drain pump filter, to collect
any excess water that may come out of the drain pump
when the filter is removed.
3.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
WATER INLET AND INLET FILTER
To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet and inlet
filter regularly.
MOVING THE MACHINE
If the machine is to be moved to a distant location, replace the transportation locks removed before installation to prevent damage as
shown below.
1. Remove the blanking plugs.
2. Remove the back cover
3. Insert the synthetic stabilisers and the transportation bolts.
4. Tighten the bolts with a spanner.
5. Replace the back cover.
1.
3.
2.
4.
5.
LONG PERIODS OF DISUSE
pre-
Wash Rinse Spin Dry
wash Wash Rinse Spin
T
emp
Silk
O
O
Speed
Quickwash
Wool
rt
Re
Spin
D
D
e
ella
ay
y
E
E
x
x
t
t
r
r
a
a
R
hold
Dinryse
Eco
E
T
ciome
S
P
S
t
a
t
a
u
a
r
r
t
se
t
/
/
Synthetics
r
riin
n
s
s
e
e
P
a
u
s
e
Prewash
Drain
If the washing machine is left idle for a long period, pull out the electrical plug and turn off the water
supply. Open the washer door to prevent formation of moisture and odours. Let the door open while not
used.
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY CODES
DISPLAY CODES AND SPECIAL FUNCTIONS
CODES
Err1
Err2
CAUSES
SOLUTIONS
¬ Washer door is not properly shut.
¬ Drainage error.
_ Close the washer door properly
_ Clean the filter and check the drain hose for block-
age.
Err3
¬ Temperature sensor error
_ Please contact the Service Center.
(Appears at the end of a cycle).
Err4
Err5
Err6
Err7
Err8
unb
End
1:16
0:01
60
¬ Heater error (Appears at the end of a cycle).
¬ Water inlet error.
¬ Motor error.
_ Please contact the Service Center
_ Check the tap and the water pressure.
_ Please contact the Service Center.
_ Please contact the Service Center.
_ Please contact the Service Center.
_ Redistribute laundry to balance the drum.
¬ Motor error.
¬ Water exceeds protective level.
¬ Laundry is unevenly distributed.
¬ End of wash cycle.
¬ Remaining time is 1 hour and 16 minutes.
¬ Remaining time is 1 minute.
¬ Preset washing temperature is 60° C.
¬ Cold wash.
--
800
¬ Preset spinning speed is 800rpm.
¬ Control panel lock function: Press the "Delay" and the "Start/Pause" buttons simultaneously for 3 seconds after starting a
program. It can no longer be changed by operating buttons or knobs. The washing machine emits an audible signal while the control
panel is locked. To unlock press the "Delay" and "Start/Pause" buttons again for 3 seconds.
¬ Power-off memory function: In case of abrupt power failure or the need to cut off the power during a program cycle, the pres-
ent settings will be saved and the preset operation will resume when the power is on again.
¬ To cancel a program or select a new program and options during the wash cycles.
a) Press the "Start/Pause" button, then switch off the power and the program is automatically cancelled. Turn the program selector
again to choose another program.
b) If you wish to select an option during the wash cycle, press the "Start/Pause" button, then select the desired option and press the
"Start/Pause" button again.
Note: 1.The Rinse hold function can be selected directly without pressing first the "Start/Pause" button, but before the machine starts
the spin program.
2.Alarm sound can be cancelled if it is needed. Please follow the instruction as below:
Switch on the washing machine and turn the program knob to spin cycle, then press the delay button and hold on for 3 seconds. The
“b OFF” will be displayed on the screen which indicates that alarm sound has been canceled. To operate the above steps again so the
alarm sound can be recovered and the display will show “b ON”
3.CLRF:Too much foam used in wash cycle.Washing machine can eliminate the foam automatically during spin cycle.If the washing
machine fails to eliminate the excessive foam, it will end the cycle without spinning.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
TROUBLESHOOTING
TROUBLESHOOTING
The following circumstances do not constitute problems. Do not contact the Service Center until the problem has been confirmed.
PROBLEM
CAUSES
SOLUTIONS
Washing machine fails to
operate.
¬ Poor connection to the power supply.
¬ Power failure.
_ Check connection to the power supply.
_ Check the power supply.
¬ The washer door is not properly closed.
¬ Machine has not been switched on.
_ Close the washer door properly.
_ Make sure the machine is switched on.
Washing machine cannot be ¬ The "Start/Pause" button is not pressed.
_ press the "Start/Pause" button.
_ Turn on the water tap.
¬ Water tap is not turned on.
filled with water.
¬ Water pressure is less than 0,03 MPa.
¬ The inlet hose is kinked.
¬ Water supply failure.
_ Check water pressure.
_ Check the inlet hose.
_ Ensure the water supply.
_ Set the program knob properly.
_ Close the washer door properly.
_ Unblock the inlet hose filter.
¬ The program knob is not properly set.
¬ The washer door is not properly closed.
¬ The inlet hose filter is blocked.
Machine is draining while
being filled.
¬ The height of the drain hose is below 80 cm. _ Install drain hose within 80-100 cm of height.
¬ The drain hose is in water.
_ Make sure the drain hose is not in water.
Drainage failure.
¬ Drain hose is blocked.
_ Unblock the drain hose.
¬ Drain hose end is higher than 100 cm above _ Make sure the drain hose end is lower than
the floor level.
¬ The filter is blocked.
100 cm above floor level.
_ Unblock the filter.
Strong vibration while
spinning.
¬ Not all transportation bolts have been removed. _ Remove all transportation bolts.
¬ Washing machine is located on an uneven
surface or is not level.
_ Make sure the washing machine is on
an even surface and levelled.
¬ Machine load is over 7 kg.
_ Reduce amount of laundry in the drum.
Operation stops before
completing wash cycle.
¬ Water or electricity failure.
¬ Washing machine is in rinse hold cycle.
¬ Washing machine gives an error message.
_ Check the power supply.
_ Press the rinse hold button
_ Check display codes.
Excessive foam in the
¬ The detergent is not a low-foaming type or for _ Check if your detergent is appropriate.
drum, which is spilled to the manual wash.
distribution drawer. ¬ Excessive use of detergent.
_ Reduce amount of detergent in the distribution
drawer.
Automatic adjustment of the ¬ The washing program duration will be adjusted _ This is normal and doesn't affect the
washing time.
according to the laundry load and the initial water functionality.
temperature.
Spinning fails
¬ Unbalance of the laundry
_ Add clothes or run a spinning program again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Haier Europe Trading S.r.l.
Via De Cristoforis 12
21100 Varese - Italy
Tel + 39 0332 24511
Fax +39 0332 245146
E-mail [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
|