Haier Washer HW80 187S User Manual

Twin-tub Washing Machine  
User's manual  
This manual is for  
HW80-187S  
Please read this manual  
carefully before using.  
Special number:0030508674E  
Retain it for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of the parts  
Meaning and description of the symbols  
Contents marked with that symbol are related  
to the safety of the product and the personal  
safety of the users. Please operate in strict  
conformity to the contents, otherwise it may  
cause damage of the machine or injure the  
personal safety of the user.  
Warning sign  
Contents marked with that symbol are actions  
forbidden to perform. Performing of those  
actions may result in damage of the machine  
or injure the personal safety of the user.  
Forbidding sign  
Please check if the power receptacle has good earthing  
condition before using to guarantee your safety.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety precautions  
Please insert the power cord into  
special receptacle with rated vol-  
tage.Be sure to use single-phase  
three pins receptacle.The earthing  
terminal of the receptacle must be  
earthed reliably.If possible,please  
adopt electric leakage protector.  
When the machine is normally  
using, please put the power plug  
at the location easily to be insert-  
ed and extracted by hand. Be sure  
to pull the plug off when there's  
power failure, or the machine is  
being moved, cleaned or when it  
is idle.  
Earth  
If the supply cord is damaged,it must be replaced  
by the manufacturer or its service  
agent or a similarly qualified person  
in order to avoid a hazard.  
Do not use water hotter than 65 C .  
Do not put the machine at damp  
place like the bathroom . Never  
wash it with water. Do not place  
wet laundries on the control panel.  
For washing machine with ventilation  
openings in the base, that a carpet  
must not obstruct the openings.  
Do not wash water-proof laundries like  
the raincoat, bike covers etc. to avoid  
abnormal vibrations.  
Ventilation hole at  
the bottom of the  
washing machine  
Do not let the machine share one receptacle  
with other electric appliances. If the power  
plug is damaged, or the plugging into the  
receptacle is loose, do not use the plug any  
more.  
Download from Www.Somanuals.c
2
om. All Manuals Search And Download.  
Safety precautions  
Do not stretch hands into the working  
Do not decompose, repair or alter the  
machine by yourself.  
machine. It is dangerous even if the  
rotation is slow. Take special care of the  
children. This appliance is not intended  
for use by persons (including children)  
with reduced physical, sensory or mental  
capabilities, or lack of experience and  
knowledge, unless they have been given  
supervision or instruction  
conceming use of  
the appliance by  
a person responsible  
for their safety.  
Do not put any hot or heavy items  
( such as the kettle with hot water )  
on the washing machine.  
Do not wash laundries with volatile  
materials (such as thinner, petrol etc.).  
l
ro  
et  
er  
P
inn  
Th  
Keep the machine away from direct  
sunlight and heat source like the  
heater.  
Handicapped or children without care  
shall not use the machine.  
To protect your laundries and wash-  
ing machine, please take out all of the  
coins, buttons, sand, hairpin and  
other foreign materials before washing.  
Please check if the connection of the  
water inlet pipe is proper.  
It is suggested to use foamless washing  
powder.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and adjustment  
Please install and adjust the machine according to the requirement of  
the manual. It is very important to your security and correct operating  
the machine.  
Install the lint filter  
After opening the package,please take out the lint  
filter from the document bag,install it to the overflow  
filter of the wash tub.See to the figure.  
Overflow filter  
Lint filter  
Usage of the drain hose  
The drainage shall be smooth with the drain hose.  
1.The height of the drain hose shall be  
less than 10cm , or the drainage will  
not be smooth enough and cause  
<10cm  
incomplete drainage.  
2.Do not tramp or press the drain hose.  
3.If the drain hose is too long, cut it at mid point.  
To make smooth drainage, cut the front end of  
the hose slantingly.  
4.If extra drain hose is needed , please make  
separate purchase. The inner diameter of the  
extra hose shall not less than 30mm, and the  
>
30mm  
length shall not exceed 1.5m.  
<1.5m  
If the extra hose is too long, cut it either  
at point A or B.  
A
B
Download from Www.Somanuals.co
4
m. All Manuals Search And Download.  
How to change the direction of the drain hoses  
Figure 1 indicates the ex factory installation  
position of the drain hose.  
Soft item  
Extend the drain hose from the side of wash tub.  
Figure 1  
Put soft items on the ground. Lean the machine  
down gently with the front surface facing the  
ground. Take off the drain hose from the cabinet.  
Take the hose out of the fixing groove.  
(See to Figure 2).  
Soft item  
Figure 2  
Embed the drain hose into the groove along the side  
of the spin tub in the order of (1)~(3), heading for the  
side of the wash tub. (See to Figure 3).  
Embed the drain hose into the groove with  
hands. Take care not to damage the drain  
hose in fastening the fixing clamp.  
Figure 3  
Extend to the  
spin tub side  
Embed into the  
groove in turn  
Install the water inlet hose; Select the water level  
Insert the water inlet hose into the water-filling  
entrance on the control panel directly.(pull it  
out to dismantle it)  
Water inlet hose  
Water-filling  
entrance  
Select water level according to the  
quantity of the laundries.  
Water level  
indicator  
Set the water level adjusting lever  
to needed line.  
Max.  
Med  
Min  
Maximum  
Use the new water inlet hose provided  
with the machine to connect to the  
water faucet.Old hose sets should  
not be reused.  
Medium  
Minimum  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation before washing  
Preparation before washing  
1.Connect the water inlet hose.  
2.Confirm that the washing machine is earthed  
reliably . Then insert the power plug into the  
receptacle. Do not connect the earth terminal  
to the gas pipe and tap water pipe.  
3.Put down the drain hose .  
4.Slanting or uneven ground may result in  
unstable working or abnormal noise. Please  
make the machine stand horizontally.  
Pay attention to followings before washing the laundries  
Check if  
The quantity of  
When the pulsator  
Clear the  
Tie the long  
strips; fasten  
the buttons;  
close zippers.  
the laundries  
has special  
requirement  
on washing  
the laundries is running , the  
shall not be too buttons of the  
large. Stretch laundries may  
and loosen the cause noise. For  
laundries before the sake of  
pocket. Take  
out the coins,  
sand, hairpins  
etc.  
putting them in discretion, please  
the tub.  
put the laundries  
with buttons into  
other laundries.  
a. Check if the laundries are applicable for washing with machine.  
b. Divide the laundries that are not colorfast from other laundries.  
c. Put those laundries difficult to absorb water into water with hand.  
d. For those laundries with heavy soil, please first remove the dirt like  
mud or dust. For the parts with heavy soil, please apply detergent on  
them in advance, which can make it easier to remove the soil.  
e. For those laundries that may get lint ball and those with long fur, turn  
it over before putting in.  
f. Do not put those laundries polluted by chemicals into the washing  
machine directly.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
The musts in washing  
The capacity of washing and spinning of the  
machine refer to the weight of the  
standard laundries under dry condition that can  
be washed or spinned in one time. Laundries  
quantity in one washing cycle shall be lower  
than the standard capacity.  
the largest capacity is only the loading capacity  
of the drum  
The thickness ,size , type of the cloth will influ-  
ence the actual washing capacity. It is suit-  
able to put in reasonable amount of laundries  
and the laundries can be turned round in wash-  
ing for one time washing.  
Do not select " Maximum " water level for  
laundries less than 1.0kg, so as to avoid  
splashing of water.  
It is suggested not to use high sudsing detergent.  
Usage of the detergent  
How to use the whitener  
How to use the washing powder  
Direct dissolved in the machine:  
1.Fill small quantity of water.  
2.Add the powder . Run for 30  
seconds to dissolve it completely.  
3.Put in laundries. Select suitable  
water level.  
Fill water to decided level. Dilute  
the whitener with container.  
Pour it slowly into the washing tub.  
Avoid using whitener on laun-  
dries with color or pattern as they  
are prone to lose color.  
The instant dissolving of the washing  
powder:  
1.Prepare warm water of 30 C and a  
container.  
2.Add the powder while stirring to fully  
dissolve it.  
The powder is more prone to pollute the  
laundries than the detergent. Therefore  
please use it with proper quantity.  
The whitener shall not touch  
the laundries directly.  
Refer to the user's manual for  
the usage and quantity of the  
whitener.  
For powder whitener, please  
dissolve it before using.  
Dosage of different washing powder is  
different. Please refer to the instruction  
of the washing powder for the detail  
dosage.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing sequence  
Spin timer  
Wash selector  
Wash timer  
(To set to below 2 minute,  
(Strong current,  
standard current)  
(to set to below 1 minute,  
first set to 2 minute then  
turn it back. it can increase  
the service life of the timer).  
first set to  
5
minute then  
Water-filling entrance  
turn it back. it can increase  
the service life of the timer).  
STRONG  
OFF  
OFF  
5
1
2
3
6
STANDARD  
15  
12  
DRAIN  
4
9
3
WASH TIMER  
SPIN TIMER  
WASH SELECTOR  
Wash  
1. Fill the water and add the dissolved washing  
powder to make the water level reach the preset  
position. (Figure 1)  
Run washing program for some time to stir and  
dissolve the powder completely.  
Figure 1  
STRONG  
STANDARD  
DRAIN  
2.Put in the laundries. If the water quantity is  
insufficient, please add water.  
WASH SELECTOR  
Figure 2  
Figure 3  
3.Select the current.  
Select the strength of the current according to  
the laundries. (Figure 2)  
OFF  
3
6
15  
4.Select the washing time  
Select the washing time according to the  
laundries. (Figure 3)  
12  
9
WASH TIMER  
STRONG  
STANDARD  
5.After washing,Set the "WASH SELECTOR"  
at "DRAIN". (Figure 4).  
DRAIN  
WASH SELECTOR  
Figure 4  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Midway spinning  
1.Put the laundries into the spin tub evenly and smoothly.  
2.Spin  
(1) Put the gland in properly.  
Please put in the gland properly even if the laundries quantity is small.  
Push  
Gland  
Push  
Proper  
Proper  
The laundries  
are slanting  
No gland  
(2) Close the inner and outer cover of the spin tub.  
(3) Spin for 1-2 minutes.  
Outer cover of  
the spin tub  
Inner cover of  
the spin tub  
Rinsing  
Rinse with water-filling  
1.Put the laundries  
Put the laundries into the wash tub. Select suitable current according  
to the laundries.  
2.Adjust the water level  
Set the water level with water level adjusting lever according to the  
laundries quantity. Then fill suitable water continuously.  
3.Rinse  
Adjust the wash timer to 5-7 minutes to do rinsing.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rinsing  
Rinse with stored water  
(Repeat the midway spinning and rinsing with stored water  
for 2-3 times)  
1. Put the laundries into the wash tub. Select suitable current according to  
the laundries.  
2. Fill water to preset water level.  
3. Rinse  
Adjust the wash timer to 2-3 minutes to do rinsing.  
When the laundries quantity is few, please use "Standard" current.  
If you use "Strong" current, it may splash.  
Spinning  
1. Put the laundries into the spin tub evenly and smoothly.  
2. Press the gland in the tub properly. Close the inner and outer cover of  
the spin tub.  
3. Spin  
Select suitable spin time according to the laundries, and do spinning.  
During spinning, if there's abnormal sound, it is generally owing to slanting  
placement of the laundries. Please stop the machine and re-order the  
laundries.  
In spinning, it will pause the work if you open the outer cover of the spin  
tub. Close it to resume the spinning.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disposal after washing  
After using, please clean the lint and eyewinker of the lint filter and  
overflow filter in time. Otherwise it may influence your using the machine.  
Please first pull off the power plug from the receptacle before cleaning.  
Cleaning the lint filter  
The lint filter must be used during washing.  
It must be cleaned in time after each using.  
1. Take off the lint filter  
Put hand at the indicated position.  
Push down to take it off. ( See  
Figure 1)  
Figure 1  
2. Clean the lint  
Put it in water and clean while it is  
still wet.(See Figure 2)  
3. Install the lint filter  
After cleaning, insert the bottom  
of the lint filter ( marked with  
"down side") into the overflow filter ,  
then push the upper part of the  
filter in ( marked with " up side ").  
(See Figure 3)  
Figure 2  
Figure 3  
Cleaning the overflow filter  
Too much lint on the overflow filter will influence  
the normal usage of the machine. Please  
clean it every two months.  
Elastic fixing  
claw  
Take off the overflow filter.  
As indicated in the figure, nip the elastic fixing  
claw and pull it to the direction of the arrow to  
take it off.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning the overflow filter  
2. Take off the corrugation pipe.  
Dismantle the upper part of the  
corrugation pipe inside the  
overflow filter ( as indicated in  
Figure 1).  
Water level  
adjusting lever  
Corrugation  
Pipe  
3. Cleaning the overflow filter  
Clean the lint around the filter  
and flush with tap water.  
Figure 1  
4. Install the overflow filter.  
(1).Install the corrugation pipe.  
(2).Insert the mounting plate at  
the bottom of the filter into  
the valve cover.  
Hook  
(3).Hang up the hook at the left  
upper side.  
(4).Push the upper part in as  
indicated in Figure 2.  
Figure 2  
Cleaning the protective cover  
During washing clothes,must use protective cover  
Finished washing everytime ,please clean lint on the  
surface  
Please clean lint under the protective cover termly  
Cleaning method:  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning the protective cover  
1.cleaning dirty under the protective cover  
take out the sundries using the plier or other wiry  
2.install the protective cover  
after cleaning, install it as origin assure it reliable  
Disposal of the complete unit  
After washing, dismount the water inlet  
hose.  
Do not store water in the tub for long  
period. Discharge the water immediately  
after each using.  
Pull off the power plug and hang up the  
power cord.  
Hang up the drain hose.  
Wipe the complete unit with soft  
cloth twisted dry.  
Wipe with neutral detergent if too dirty  
Do not wash it directly by water  
Wipe off the water drops on the surface  
and inside the tub with clean soft cloth.  
Open the cover of the wash tub and the  
inner/outer cover of the spin tub for  
some time (about one hour), then close  
them.  
Petrol  
Thinner  
Alcohol  
Trouble-shooting Answers to question  
If the laundries fall to the outer side of the spin tub  
If the laundries fall to the outer side of the spin tub,  
Please contact the after-sales service department.  
Download from Www.Somanuals
1
.co
3
m. All Manuals Search And Download.  
Trouble-shooting Answers to question  
(If there's breakdown, please pull off the power plug before checking) The following  
phenomena are not breakdowns sometimes. Please confirm again before sending  
it to repair. If there are real breakdowns, please come to the special maintenance  
department or after-sale service department of our company. Do not repair it by yourself.  
How to settle  
The reason  
Phenomena  
Use it when the power is on.  
Insert the power plug tightly.  
Remove the foreign materials?  
Is there power failure?  
Is the power plug loose?  
Is the pulsator twisted by  
foreign materials?  
The machine does  
not act.  
Is the drain hose put down?  
Is the drain hose blocked by  
foreign material?  
Put down the drain hose?  
Remove the foreign material?  
The draining  
does not work  
Are there laundries falling to  
the outer side of the spin tub?  
Please contact the after-sales  
service department.  
Are there hair pin, coins or  
metal items brought inside  
the tub?  
Remove the hair pin, coins or  
metal items  
There's abnormal  
sound during washing  
Is the machine slanting?  
Is the gland pressed evenly?  
Are there laundries falling to  
the outer side of the spin tub?  
Are the laundries in spin tub  
too much?  
Level the machine properly.  
Pressed the gland evenly  
Remove the laundries  
There's abnormal  
sound and violent  
vibration during  
spinning  
Remove a little laundries  
Maximum/72L 5/66L 4/60L  
3/54L 2/48L 1/42L  
-
230V~/60Hz  
360W  
200W  
Download from Www.Somanuals.
1
com
4
. All Manuals Search And Download.  

Graco Stroller PD202866A User Manual
Grindmaster Coffee Grinder 115AB User Manual
Harbor Freight Tools Battery Charger 68750 User Manual
Harbor Freight Tools Power Hammer 94847 User Manual
Health O Meter Scale HAP301 User Manual
Hotpoint Refrigerator 8326 User Manual
HP Hewlett Packard Personal Computer 576X B User Manual
HP Hewlett Packard Power Supply 6216A User Manual
Hunter Fan Fan 21897 User Manual
IBM Cordless Telephone 4900 User Manual