Haier Washer Dryer HWM 65 S User Manual

Fuzzy Computerized Automatic  
Washing Machine  
User's manual  
This manual is for  
HWM-6.5/S  
Please read this manual  
carefully before using.  
Retain it for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Names of the parts  
Top lidA  
Water absorption cushion  
Top lid B  
Detergent box  
Water valve  
Cabinet handle  
Drain hose  
Lint filter(Installed by user)  
Lint filterA(Installed by user)  
Control panel  
Filter cover  
Inner tub  
Power line  
Pulsator  
Control panel film  
Cabinet  
Adjustable foot  
back cover  
fixed foot (3)  
base frame  
Meaning and description of the symbols  
Contents marked with that symbol are related to the safety  
Warning sign  
of the product and the personal safety of the users. Please  
operate in strict conformity to the contents, otherwise it may  
cause damage of the machine or injure the personal safety  
of the user.  
Contents marked with that symbol are actions forbidden to  
perform. Performing of those actions may result in damage  
of the machine or injure the personal safety of the user.  
Forbidden sign  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety precautions  
The power cord plug should be convenient  
Please insert the power cord into special  
receptacle with rated voltage. Be sure to  
use single-phasethree pins receptacle.  
Ensure the earthing prong of the power  
receptacle is earth edreliably. Use leakage  
protector if possible.  
to be pluged in or pluged out with hand  
while the washing machine runs normally.  
Be sure to pull the plug out and close the  
water tap when the machine is idle, when  
moving the machine, or when cleaning  
the machine. Do not use wet hand to ins-  
ert or pull out the power plug.  
Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or  
nip it with weight. If the power cord or the power plug is bad, or the power plug becomes  
flexible, to avoid risk it is required to have it replaced by the technicians of our special  
shop or the after-sale service department. Keep the pin of the power plug clean, if the  
power plug is polluted with dust, please wipe with dry cloth carefully.  
Do not put the machine at damp place like  
Do not use water hotter above 50 C .  
the bathroom. Never wash it with water.  
Not put wet laundries on the control panel.  
In case the washing machine is installed  
on ground with carpet, do not block the  
ventilation hole with carpet.  
Do not wash water-proof laundries like  
the raincoat, bike covers etc. to avoid  
abnormal vibrations in spinning.  
The ventilation holes  
at the bottom  
soft items  
Do not let the machine share one receptacle with other  
electric appliances. If the power plug is damaged, or  
the plugging into the receptacle is loose,  
do not use the plug any more.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety precautions  
Do not stretch hands into the working  
Do not decompose, repair or alter the  
machine by yourself.  
machine. It is dangerous even if the  
rotation is slow. Take special care of  
the children. Do not let the children  
climb the washing machine.  
Do not put any hot or heavy items (such  
as the kettle with hot water ) on the  
washing machine.  
Do not wash laundries with volatile  
materials (such as thinner, petrol etc.)  
trol  
r
Pe  
nne  
Thi  
The handicapped or children without  
care shall not use the machine.  
Keep the machine away from direct  
sunlight and heat source like the heater.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and adjustment  
Please install and adjust the machine according to the requirement of the manual. It is  
very important to your security and correct operating the machine.  
Install the lint filter  
Install the bottom plate  
After you open the package, please lean  
the washing machine gently down on soft  
items ( like the towel cloth, blanket, etc. ).  
Install the bottom plate to the bottom of the  
machine with the eight screws by a cross  
screwdriver, then lift the machine up gently.  
See to the figure:  
Push lint filter downward to location for lint filter .  
Install  
Install  
Front  
Back  
Soft items  
Screw  
Bottom plate  
Adjust the installation position  
The largest allowed slope of the  
shank base of the machine is 2  
.
The slanting or rough ground will  
result in unstable running or  
stoppage of the machine. Please  
adjust it with following methods:  
Adjust the adjustable foot:  
1.To twist the adjustable foot, please  
first lift up the side of the foot slightly,  
loosen the adjustable nut, and twist  
the foot.  
adjustable nut  
Fasten  
adjustable foot  
Loosen  
High  
Low  
2.Fasten the nut after adjustment.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to change the direction of the drain hose  
3
protrude the drain hose from the hole  
on the right side of the bottom, and fast  
it onto the bottom with the rack and screws.  
Set the bracket on the drain hose .There  
is a hole on the cabinet to hang the drain  
hose (as figure 3).  
1
Dismount the back cover of the washing  
machine.  
Figure 3  
drain hose rack  
Figure 1  
4
install the back cover as what it looks  
before.  
2
Take off the drain hose frame. Put down  
the drain hose. Take off the drain hose rack.  
As indicated in Figure 1 Pull the drain hose  
into the cabinet from the left side of the bottom  
(as figure 2).  
Figure 2  
Usage of the drain hose  
The drainage shall be smooth with the drain hose.  
1.put the drain hose up to suitable position. Do not  
put it on ground  
2.Do not step on or press the  
drain hose.  
Notes: the highest point of drain pipe should be higher  
than the water level of washing tub for avoiding  
to siphon phenomenon during drain.  
The highest point  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Install the water inlet hose  
1. Attach the water inlet hoses to the water faucet. Using pliers, tighten  
the coupling. ( As figure 1)  
NOTE: Do not over tighten. Damage to the  
valves can result.  
2. Connect the other ends to the water inlet valve .  
( As figure 2)  
Figure 1  
Jointer of the water inlet hose  
Jointer of the  
water inlet valve  
Figure 2  
Water absorption cushion  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Check the connection between the water inlet  
hose and the water tap  
1.Swaying the hose gently to confirm if it is fastened  
stable.  
2.After installation, open the tap to check if it leaks.  
3.Do not bend the hose with overstrain.  
4.Before each usage please check if the connection  
between the water inlet hose and the water tap is firm,  
so as to prevent dropping from improve Installation  
position.  
Take down the water inlet hose  
1.After using,Close the water tap.  
2. Pull off the water inlet hose from the water tap and washer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation before washing  
Preparation before washing  
1. Connect the water inlet hose.  
2. Confirm that the washing machine is  
earthed reliably. Then insert the power  
plug into the receptacle. Do not connect  
the earth terminal to the gas pipe and tap  
water pipe.  
3. Hang up the drain hose.  
4.Slanting or uneven ground may result in  
unstable working or abnormal noise. Please  
make the machine stand horizontally.  
Pay attention to followings before washing the laundries  
Confirm  
if  
Clear the pocket. Fasten the The quantity of  
When the pulsator  
the laundries is running , the  
shall not exceed buttons of the  
the rated value. laundries may  
The big laundries cause noise. For  
there's special Take out the  
requirement for coins , sand,  
the laundries. hairpins etc.  
buttons and  
zippers.  
like the jeans  
shall be put in  
loosely.  
t h e s a k e o f  
discretion, please  
put the laundries  
with buttons into  
other laundries.  
a. Please check if the laundries are applicable for washing.  
b. Separate those not colorfast from other laundries.  
c. For laundries not water absorbing, please put them into water with hands.  
d. For laundries with much soil, please remove the soil first. You can add detergent on the  
part with serious soil directly. It is much easier to remove the soil by that mean.  
e. For laundries likely to get lint ball or with long fiber, please first turn the inside out before  
putting them into the water.  
f. Do not put the laundries polluted with chemicals directly into the washing machine.  
G. For those small laundries ,laundries likely to be twisted or worn, and woolen laundries,  
please put them into mesh bag before washing.  
h. Do not select heating function for clothes that should avoid hot water or wear.  
i . In order to prevent the heating band from being entangled, washing of seriously worn  
or linty clothes should be prohibited.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Put in the laundries  
The capacity ofwashing and spinningof the  
machine refer tothe largest weightof the standard  
laundries under drycondition that canbe washed  
or spinned inone time. Onetime washing quantity  
shall be lowerthan the ratedcapacity. The largest  
capacity of thismachine is 5.0kg.  
The thickness, size, type of thecloth will influence  
the actual washingcapacity. Itis suitable forone  
time washing toput in reasonableamount of  
laundries and thelaundries can beturned round in  
washing.  
Do not selectHigh water levelfor laundries less  
than 1.0kg, soas to avoidsplashing of water.  
To wash thin laundrieslike the stocking, silk etc.,  
please first putthem into washingmesh bag (which  
can be purchasedseparately) before wash.  
Usage of the detergent  
How to use the washing  
powder  
Direct dissolved in the machine  
1.Fill water to "Low" water level.  
2.Add the power. Run for 30 seconds  
to dissolve it completely.  
Inlet box of the detergent  
3.Put in thelaundries. Select  
suitable water level.  
The instant dissolving of the washing  
powder:  
1.Prepare warm water of 30 and a  
container.  
2.Add the powder while stirring to  
fully dissolve it.  
Put in the prorer quantities detergent  
according to the water level and the  
laundries quantities .  
It is suggested not to use high  
sudsing detergent.  
Washing powder with poor quality or  
long time storage maybe caked.  
Please pay attention to cleaning the  
detergent box intime  
How touse the whitener  
Fill water to decided level. Dilute  
the whitener with container. Pour  
it slowly into the washing tub.  
Avoid using whitener on  
laundries with color or pattern as  
they are prone to lose color.  
The whitener shall not touch the  
laundries directly.  
Refer to the user's manual for  
the usage and quantity of the  
whitener.  
For powder whitener, please  
dissolve it before use.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use the operation buttons  
a. Description of the function of the buttons  
"PROCEDURE"button  
With it you can select one or  
several processes of soak,  
wash, rinse and spin.  
STANDARD  
SOAK  
JEANS  
WASH  
RINSE  
SPIN  
GENTLE  
QUICK WASH  
WATER  
LEVEL  
SELECTION  
PROGRAM  
SELECTION  
PROCEDURE  
SELECTION  
" WATER LEVEL"button  
The user selects a suitable water level depending  
on the load.  
If "Quick" wash is selected, water level will  
indicate "2". After water level reaches "2", it will  
wash while water filling, and wash normally upon  
the water level reaching "4".  
AM " button  
GR  
"PRO  
You can select from the following four programs.  
Normal wash  
Standard  
Jeans  
After washing for 1 min, pressing "Water level"  
button will enable supplemental water filling, which  
will stop automatically upon the water reaching  
overflow level.  
Large, thick or heavily  
soiled laundry  
Woolen textiles or underwear  
Gentle  
10 min quick wash for  
load below 1 kg  
Quick  
Remarks: After pressing "POWER ON/OFF" to connect power supply, if the washing machine  
lasts idle more than 10 min, it would automatically shut off the supply.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SURPLUS(MIN)  
"START/PAUSE"button  
To indicate -- during sensing.  
To indicate remaining min. During  
program running.  
After the power is switched on, press it to  
start the machine  
During working, push it to pause working.  
During pause, push this button to restart  
and continue operation.  
To indicate remaining reserved  
time (hrs) during reservation period.  
To indicate fault symbols for abnormal  
"POWER ON/OFF"button  
conditions (see page 16)  
Page 16  
Press "Power On/Off" button to  
connect power supply.  
After power is connected, pressing this  
button will cut off the supply.  
SURPLUS MIN  
POWER  
ON/OFF  
START  
PAUSE  
RESERVATION  
CALEFACTION  
"RESERVATION/CALEFACTION" button  
Press "RESERVATION/CALEFACTION"button to set scheduling or heating  
Function. If heating function is selected, the scheduling function is unavailable.  
During machine running, the display indicates the cycle remaining time in  
minutes). Press "RESERVATION/CALEFACTION"button, the display will  
Indicate the remaining scheduled time to cycle end (in hours), the decimal point  
flashes to indicatethe scheduled progress.  
Heating function can be selected if keep pressing "RESERVATION/  
CALEFACTION"Button for more than 2 s. If the temperature indicator is  
lighted, it means heating function is selected. If keep pressing  
The"RESERVATION/CALEFACTION"button for more than 2 s, the  
temperature indicator turns off, and the heating function is cancelled. The  
initial temperature is about 30 , and you can select your  
desired value in 3 s in a switching sequence 30  
After the machine starts running, if selection or cancellation of  
40  
20  
.
heating function isdesired, you shouldswitch off the power andreselect.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating procedure and explanations for the  
b.  
buttons  
STANDARD  
JEANS  
SURPLUS MIN  
SOAK  
WASH  
RINSE  
SPIN  
GENTLE  
QUICK WASH  
POWER  
ON/OFF  
WATER  
LEVEL  
SELECTION  
START  
PAUSE  
PROGRAM  
SELECTION  
PROCEDURE  
SELECTION  
RESERVATION  
CALEFACTION  
1 Press the "POWER ON/OFF" button to switch on  
the power supply  
POWER  
ON/OFF  
After switching on, the washing machine heating function will be  
automatically set inactive.  
In order to select heating function, the  
should be pressed for more than 2 s until the heating indicator is lighted, which means  
the heating function is selected. The initial status is 30 , and 40 or 20 can be  
selected if you press RESERVATION/CALEFACTION button again in 3s.  
"RESERVATION/CALEFACTION"button  
"
"
It has the special power resume function. In the case of power failure  
or the power plug is loose during washing, the machine can save  
the running program, and resume the program after the power  
supply is recovered. You do not need to set the program again.  
2 Press the button of" PROGRAM "to  
select a suitable full-automatic program  
PROCEDURE  
SELECTION  
After switching on, the "Standard" program will be thedefault. If other full-automatic program is  
desired, you can press the button "PROGRAM/SELECTION" to getthe corresponding  
indicator on. Refer to the"Button of 'PROGRAM/SELECTION '"  
paragraph on page 10.  
Example: Use the "Quick" program for slightly soiled articles.  
Page 10  
When "standard" programis selected, thewashing machine willperform full-automatically  
controlled fuzzy programto set waterlevel, water flowand wash duration according to the  
cloth nature andweight  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Press the button of "PROCEDURE SELECTION"  
to select suitable processes.  
PROCEDURE  
SELECTION  
After the power is switched on, the washing machine will automatically  
set a normal program comprising of processes of "Wash, Rinse and Spin" .  
If other program is desired, press the button of "Process" to select one  
or several process of soak, wash, rinse and spin. Refer to the  
paragraph "Processes selecting".  
Page 10  
Attention  
Even there's nowater in thetub, the  
spinning will start after acertain period.  
Do not use soak process for woolen laundries.  
Wash the laundries that are prone to lose  
color separately from other laundries.  
The pulsator will not rotate unless the  
water is filled to selected water level.  
Selection method of the procedure programs  
Times of pushing Selected procedure  
the"select"button program  
Contents(the lighted indicators  
indicate the programs about to run)  
Applicable procedure  
When the commonlaundries  
need washing, rinsingand  
spinning.  
Soak Wash Rinse Spin  
Soak Wash Rinse Spin  
Soak Wash Rinse Spin  
Soak Wash Rinse Spin  
0
1
2
3
4
5
Wash, rinse, spin  
Wash(the washing  
liquid remains in the  
tub)  
Repeat using thewashing  
liquid  
Wash,rinse(the  
rinsing liquid remains  
in the tub)  
The laundry needn't spin to  
avoid wrinkles  
When the laundriesneed  
rinsing and spinningafter  
manual washing  
Rinse,spin  
When the laundriesneed only Soak Wash Rinse Spin  
spinning after manual  
washing (first drainthen spin)  
Spin(spin after drain)  
Soak,wash,rinse,spin  
Soak Wash Rinse Spin  
If the laundriesare very dirty,  
or the sleeveand collar are  
dirty, firstsoak then wash  
If you push the "PROCEDURESELECTION" button for6 times, itwill resume the  
original mode, andit will circulatelike that.  
If you select the"QUICK WASH" program, youhave to setthe full procedureof  
wash, rinse andspin. The procedure can notbe selected.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Press the "WATER LEVEL" button to select  
suitable water level  
WATER  
LEVEL  
SELECTION  
After switching on the power, press the button "WATER LEVEL" to select a water level according  
to the load. Please refer to the button " Water level" on page 10.  
Page 10  
5 Push the " RESERVATION/CALEFACTION"  
RESERVATION  
button to select suitable reserve programCALEFACTION  
After switching on, the washing machinereserved wash programwill be automaticallyset  
inactive. If youdesire a washcycle to endat a reservedtime, you canpress the  
"RESERVATION/CALEFACTIONbutton to set a reserved wash program.  
Refer to The button of "RESERVATION/CALEFACTION" on page 11.  
Page 11  
Confirm the reserveprogram  
When "Reservation" becomes active, the nixie tube displays the time  
to the end of the reserved wash cycle, and the indicator turns on.  
To change the running program or cancel the reservation,  
the washing will finish  
about 18 hours later  
you should cut off the supplyand reselect.  
Confirm the heating function  
Keep pressing the"RESERVATION/CALEFACTION" button for more than 2 s,  
the heating indicator turns on (red).  
Keep pressing the "RESERVATION/CALEFACTION"button for morethan 2 sagain, the  
heating indicator turnsoff and heatingfunction is cancelled.  
After the machinestarts running, ifselection or cancellationof heating function  
is desired, youshould switch offthe power andreselect.  
START  
PAUSE  
6 Press the "start/pause" button  
Close the top lid  
Except water filling (excluding heating function) and draining process,  
if the top lid is opened, the machine will stop running and alarm.  
Finish washing  
The washing machine cuts off thepower supply automatically when wash cycle ends.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disposal after washing  
After using, please clean the lint and foreign materials of the lint filter etc. in time.  
Otherwise it may influence your using the machine.  
Please first pull off the power plug from the receptacle before cleaning.  
The lint filter must be used during washing.  
It must be cleaned in time after each using.  
Install  
Dismantle  
1. Pull upward to dismantle lint filter.  
2. Push downward to install lint filter.  
Dismantle  
Install  
Clean  
3. Please clean lint filter after wash.  
Dismantle & Install  
If the cabinet is dirty, wipe it with wet cloth  
Do not flush it directly with water.  
Wipe it with neutral detergent.  
Do not wipe it with thinner, petrol,  
alcohol etc.  
The filter screen of the water inlet  
valve is likely to be blocked by  
foreign materials and influence  
the water inlet. Please clean it  
Alcohol  
Petrol  
ner  
Thin  
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).  
2.Do not store water in the washing machine for a long period. Drain the water completely after  
each using.  
3.Be sure to pull off the power plug before maintenance.  
4.Hang up the power cord and drain hose.  
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for  
some time (about 1 hour), then close the top lid.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble shooting Answer to question  
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes.  
Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance  
department or after-sale service department of our company. Do notrepair it by yourself.  
Phenomena  
Reason  
How to settle  
After the reservation is started,  
it rings and the digital tube  
displays "E0"  
The top lid is not closed  
Close the top lid  
Is the drain hose blocked by  
foreign material?  
Clean the foreign material. Open  
and close the top lid once.  
The draining does not work,  
or the speed of draining is  
too slow. The digital tube  
displays "E1" and it rings.  
Is the drain hose frozen?  
Clean the frozen material.  
Some minutes later the machine will  
continue to work  
After long running of pump in the hot  
weather, power will be cut automatically  
for safe.  
It stops running except water  
filling and draining. The digital  
tube displays "E2" and it rings.  
The top lid is not closed  
Close the top lid  
The safety switch acts. The  
spinning cannot work (after  
twice revising). The digital  
tube displays "E3" and it rings.  
Are the laundries put slantingly?  
Is the machine slanting?  
Re-order the laundries. Close the top lid.  
Level the machine in right position.  
Open and close the top lid once.  
It does not do water inlet or  
the speed is slow (the water  
level is not reached after 15  
minutes). The digital tube  
displays "E4" and it rings.  
Is the water faucet open or is  
there water supply failure?  
Open the water faucet. Open and close  
the top lid once.  
Is the water inlet valve is  
blocked  
Clean the water inlet valve. Open and  
close the top lid once.  
The machine does not act.  
(The indicators are off.)  
Is there power failure?  
Is the power plug loose?  
Is the machine slanting?  
Use it when the power is on.  
Insert the power plug tightly.  
Level the machine properly.  
Fasten the buttons and zipper  
Is there metal material inside  
the washing machine?  
There's abnormal sound  
inside the machine.  
Are the laundries slanting in  
spinning?  
Re-order the laundries. Close the  
top lid.  
Fasten the jointer screw properly.  
Is the jointer screw of the water  
inlet hose is loose or twisted awry?  
The water faucet leaks.  
Common phenomena  
Explanation  
Phenomena  
The spinning is intermittent when it starts.  
Pause during washing.  
Balance the laundries to avoid slanting.  
supplemental water filled after fabric sensor has checked  
fabric (about 48 seconds)  
The program is setting the drain time. Some  
time is needed before it starts spinning.  
Select spin, but it doesn't work.  
There may be some water flowing out of the  
drain hose in the first use of the machine.  
It is the water remained in the factory inspection of performance.  
If heating function is selected before reaching the selected temperature in order  
to let the water heating uniformity the Pulsator turns mildly. After arriving the  
selected temperature it can works in gear.  
The Pulsator turns mildly after inlet the water  
but always feels immobilly.  
Select the heating function the temperature indicator  
is lighted sometimes twinkles sometimes not.  
When the machine is in heating sate the temperature indicator twinkles.  
Select the heating function if not in the sate the lighted does not twinkle.  
It is the special power resume function. In the case of power failure  
or the power plug is loose during washing the machine can save  
the running program and resume the program after the power  
supply is recovered. You do not need to set the program again.  
When the power plug is inserted, the computer board  
indicator is switched on, and the machine starts working  
This is the normal phenomenon .The actual heating temperature is also  
influenced by the atmosphere temperature the water temperature for  
wash and the water hardness.  
The actual heating temperature may have discrepancy  
with the setting level.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Packing list  
Name  
Quantity  
One piece  
User's manual  
Warranty card  
Water inlet hose  
One piece  
The side of connection between the water inlet  
hose and the washing machine  
One piece  
The side of connection between the jointer of  
the water inlet hose and the water faucet  
Lint filter  
Two pieces  
Two pieces  
One piece  
Lint filter A  
Bottom plate  
Tapping screws  
Eigh piecest  
One set  
Fuzzy computerized automatic washing  
machine  
Specification  
Water level/Water  
quantity (about)  
0.03MPa-0.78MPa  
Water inlet pressure  
Rated washing /  
spinning capacity(kg)  
5.0 /5.0 (weight of standard dry cloth)  
6.5/6.5 (weight of standard dry cloth)  
Max washing /  
spinning capacity(kg)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  

GPX Portable Stereo System BI100S User Manual
Grindmaster Coffee Grinder VS 15 User Manual
Hafler Stereo Amplifier SE240 User Manual
Haier Flat Panel Television LET32T1000HF User Manual
HannsG Computer Monitor HB 191DPB User Manual
Honeywell Beverage Dispenser 88013 User Manual
Honeywell Carbon Monoxide Alarm 19546GM1 User Manual
HP Hewlett Packard Treadmill 4328A User Manual
Hunter Fan Dollhouse 20730 User Manual
Hunter Fan Outdoor Ceiling Fan 20177 User Manual