COLOUR TV RECEIVER
OWNER'S MANUAL
The Owner`s Manual for the Follow Models:
21F9K, 21T3A, 21F3A, 21T9D, 21F9D,
21FA1(D),21TA1-BG
Please read this manual carefully
before operating the unit, and keep it
for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
4. To prevent the TV set from firing
and electric shock, don't expose the
TV set to rain or moisture.
2. In order to prolong the using life of
the TV set, please place it on a
ventilated place.
5. Don't open the back cover,
otherwise it is possible to damage the
components in the TV set and harm
you.
6. When the TV set isn't going to be
used for long time or it is in thunder
and lightening, please pull out the
plug from AC outlet and the antenna
plug from the cover of the TV set.
3. Don't place the
TV set in the
sunshine or near
heat source.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Antenna connection
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
300 twin-lead cable
Antenna adapter
75 coaxial cable
Mixer
additional
purchase
Antenna input
75 standard
coaxial type
Plug
(additional purchase)
AC power socket
Note
* It is recommended that you'd better use the 75 coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
Preparation for the remote control
Battery installation
Tips for remote operation
When the remote control will not be used
for a long period of time or when the
batteries are worn out, remove the
Remove the batteries cover.
Insert two size AA batteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment.
batteries to prevent the leakage.
Do not throw the batteries into fire.
Dispose of used batteries in the specified
manner.
Do not drop, dampen or disassemble the
remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
Position of Keys and Plug-ins
Front panel
21F9K/21F3A/21T3A
Signal receiver
Power
switch
21F9K
R/L
audio
Power indicator
21F3A/
21T3A
Video
Volume
up/ down
Menu
TV/AV
switch
Channel
position up/down
Power
switch
Power indicator
Signal receiver
21F9D/21T9D
Power
switch
Power indicator
Channel
position up/down
Menu
TV/AV
switch
Signal receiver
Volume
up/ down
VIDEO
Signal receiver
Power switch
TV/AV switch Menu Volume down/up Channel down/up
L/R audio
Power
indicator
21FA1(D)/21TA1-BG
NOTE:
1
2
Please do not use the side and back AV terminals simultaneously.
The side AV is optional and the silk-screen may be adjust without notice.
Back panel
21F9K/21T3A/21F3A
Audio output terminal
Video output terminal
Antenna input socket
Video Cr inputterminal
Video Cb inputterminal
Video Y input terminal
S-VIDEO input terminal
Video input terminal
Audio input terminal
21F9D/21T9D/21FA1(D)/21TA1-BG
Audio output terminal
Video output terminal
Video Y input terminal
Antenna input socket
Video Cr inputterminal
Video Cb inputterminal
Audio input terminal
Video input terminal
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Buttons and Descriptions
TV and AV Exchange Button
Toexchange between TVand
other available videoinputs
TV/AV
DISP
SYSTEM
SCAN
LOCK
Mute Button
Press to conceal the sound of programs.
Screen Display Button
System Adjust Button
Direct-digit Choosing Button
Directly select channel numbers
Digit Select Button
Change the channel position number
between one digit, two-digits and three
-digits.
CALENDAR
S.STD
Picture Mode SelectButton
There are DYNAMIC, STANDARD,
MILD,MEMORY, PICTURE MUTEand
COLOR MUTE sixmodes of picture.
P.STD
Menu Select/Adjust Button
Use this buttonto adjust themenu,
the volume andthe channels, aswell
as to controlthe game.
CH+
MENU
CH-
VOL+
VOL-
Program Play-forward Button
I/II Button
Used for setting the acoustics. Thereare
SURROUND OFF,SOURROUND MONO,
SURROUND STEREO1,SURROUND STEREO
2 four kinds of sound modes.
BACK
PRE
I/II
Game Background SelectButton
Background Lamp ControlButton
(not available)
EXIT
MODE
LIGHT
Restart Game Button
Game Exit Button
Program Play-backward Button
GAME
Sound Mode Select Button
There are THEATER,NEWS,MUSIC and
PERSONAL four kinds of sound modes.
Calendar
Program Scan Button
Lock Setting button
DC Standby Button
Sleep TimerButton
Download from Www.Somanuals.com. All Manuals Search And Download.
Power On and Power Off
Below are methods on how to power on/off the TV set with the switch on the TV and
on the remote control.
Power on/off
Connect/disconnect to the power
1.Connect the power supply wire, then press the
Power Switch button and the red power indicator
will light, in several seconds the picture will appear
on the screen.
2. If the TV is in the state of standby, press the
button on the remote control.
NOTE
1.You can also press the 0-9
button to call off the standby
status instead of pressing the
DC Standby button. Press the
digit button of the preset channel
(limited to one digit) , you can
complete the selection of channel while you turn on the
TV set( To operate the preset of TV channel, please see
TUNING on page 9-12).
2.When you do not use the remote control, you can
directly press the the button on the television to call off
the standby status.
3. Press the button on the remote control
to get into the standby state.
DC Standby Button
4. Press the button on the TV set to
completely turn off the TV.
Power supply auto-off function
When the B.B(black background) is set ON,
and there is no signal ,
screen protection
works, and ,in 15 minutes later, it will change
into standby status.
Direct-digit Choosing Button
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs
The channels amountto 218.
Viewing TV programs
How to select the TV program
1.Use the direct-digit choosing button
Press the button from 0-9 to select a one digit channel.
If you want to select a two-digits channel, press the
Digit Select button and change it into two-digits mode,
then press the number of the channel.
If you want to select a three-digits channel, press the
Digit Select button and change it into three-digits mode,
then press the number of the channel.
If the channel position number you select is larger than 218,
the TV will use the first two number as the channel position.
2.Use CH+/- button
Direct-digit Choosing
button
Press CH+ to increase the channel position number.
Press CH- to decrease the channel position number.
3.Use PRE button and BACK button
Press PRE button, you can go back to the channels you
viewed (as many as four).
Digit Select
button
Then, press Back button, you can return to the channels you
were watching just now (as many as four) .
PRE
BACK
For example, if you have viewed channel 1,2,3,4,5,6 after the
TV is powered on, and the channel you are watching now is
number 7, then press PRE button, you can view channel 6,5,
4,3, and you may press the Back button to return to channel 7.
Choose the proper volume you like
Press VOL+/- button to adjust the volume.
Press VOL+ to increase the volume, press
VOL- to decrease the volume.
SYSTEM
VOLUME
If the colour of one channel is abnormal
It might be because the colour system
has been set improperly.You may
follow the instructionbelow to
adjust it. Press SYSTEM button, and
you can seethe form.
COLOR AUTO
CH+
SOUND BG
ADJUST
SELECT
If the colour of the picture is abnormal
Press CH+/- button, and move the indicator to COLOR,
and press VOL+ button to select the proper colour. (AUTO,PAL,
NTSC4.43 and NTSC3.58 will appear alternately.) Generally,
please set to AUTO.
VOL-
VOL+
MENU
CH-
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV Programs(continued)
Program scanning function is to let the television automatically scan all
preconcerted channel program(about two seconds per channel).
Program scan,screen display and ZOOM
Program scanning function
1.If you want to scan the programs
and select your favorite channel ,
just press the SCAN button, then
the television will start scanning
SCAN
from the present channel with a
rate of two seconds per channel
and until all the preconcerted
programs have been displayed
once, the TV set will return to the
starting channel.
2.If you want to terminate this
function during the scanning, press
the SCAN button again, and the
program will stay at the present channel.
Screen display
Usually, when you press the DISP button, the channel
number will appear on the top right corner of the screen;
when you press again,the current time and the count time
will appear on the top left and the down left corner of
the screen.It will disappear about 5 seconds later,In other
way ,you can press the DISP button to conceal the function.
DISP
ZOOM
This function can change the
PICTURE
extent of the picture.
ADJUST
TDX
ZOOM
B.B
ON
NORMAL
ON
Press MENU and CH+/- to select
ZOOM, and VOL+ to select
among NORMAL/ZOOM IN/16:9.
A
B
C
84.13MHZ
SELECT ADJUST
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning
You may operate it either on the TV or on the remote control. Here is mainly about
the remote control.
Automatic search
Automatic search
1. Press MENU button repeatedly to select the TUNING
menu ,and the function menu will displayed in the following
sequence:
PICTURE SOUND
TUNING FUNCTION
CH+
TUNING
POSITION
BAND
SKIP
SEARCH
2. Press CH+/- button to move
the indicator to SEARCH,then
press VOL+ to enter the
submenu, press CH+/- to select
AUTO.
VOL-
VOL+
MENU
CH-
2
VH
OFF
A
B
C
84.13MHZ
SELECT
CONFIRM
TUNING
3. Press VOL+ button, then
AUTO mode will work. The
TV set will search
automatically all available
programs, after that, all
available programs will be
stored in turn and the TV set
will return to the first channel.
M.F.T
UP
DOWN
FINE TUNE
AUTO
FAST TUNE
A
B
C
84.13MHZ
SELECT
CONFIRM
ASM
VH
0
STOP
If you want to stop the search, just press VOL- button.
The order of the automatic search is due to the frequency
of the program, generally speaking, it is used only at the
first time you search the program, and once the order of
the program has been confirmed, you don't have to use
this function, otherwise the order of the program will be
changed.
CH+
After searching
Press CH+/- button to check the channels.
If the colour is abnormal in a certain channel, it may be the
colour system has not been set properly, so you should
adjust it to the proper system (Reference to page 7).
VOL-
VOL+
MENU
CH-
FAST TUNE: This function is same as AUTO, but is can
make the searchtime shorter(can onlyavailable in some
areas), generally, please use the AUTO function.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning(continued)
Manual search
Manual search
1. Press CH+/- button or the Direct-digit Choosing button to
select a channel directly(take channel 1 for example).
CH+
VOL-
VOL+
MENU
CH-
2. Press MENU button repeatedly to select the TUNING
menu ,and the function menu will displayed in the following
sequence:
PICTURE SOUND
TUNING FUNCTION
TUNING
POSITION
BAND
SKIP
SEARCH
3. Press CH+/- button and move
the indicator to SEARCH.
2
VH
OFF
A
B
C
84.13MHZ
SELECT CONFIRM
Direct-digit Choosing
Button
4. Press VOL+ to enter the
submenu and CH+/- to select
M.F.T.
Press VOL+/- button to start
searching.
VOL- button is used to search the
lower frquency channel.
VOL+ button is used to search
the higher frequency channel.
Repeat the steps until you find
the channel you need.
TUNING
M.F.T
FINE TUNE
AUTO
UP
DOWN
A
B
C
FAST TUNE
84.13MHZ
SELECT
ADJUST
CH+
VOL-
VOL+
MENU
CH-
TUNING
POSITION
BAND
SKIP
SEARCH
5.When you plan to store
another new channel at a new
place, use CH+/- button and
move the indicator to
2
VH
OFF
A
B
C
POSITON, then press VOL+/-
button to select a channel
number and press CH+/- button
to move to SEARCH, then
repeat the fourth step.
84.13MHZ
SELECT ADJUST
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning(continued)
Fine tune
Fine tune
When you can't get a satisfactory picture and audio effect,
you can fine tune to obtain.
CH+
VOL-
VOL+
MENU
CH-
1. Press CH+/- button or the
Direct-digit Choosing button
to select a channel directly (take
channel 1 for example).
2. Press MENU button repeatedly
to select the TUNING menu.
Press CH+/- button and move
the indicator to SEARCH and
VOL+ to enter the submenu.
TUNING
POSITION
BAND
SKIP
SEARCH
2
VH
OFF
A
B
C
84.13MHZ
SELECT CONFIRM
Direct-digit Choosing
Button
3. Press CH+/- button and move
the indicator to FINE TUNE.
TUNING
M.F.T
FINE TUNE
AUTO
UP
DOWN
A
CH+
B
C
FAST TUNE
84.13MHZ
SELECT
ADJUST
VOL-
VOL+
MENU
CH-
4. Press VOL+/- button repeatedly to fine tune, until the
picture and the sound become satisfactory.
VOL- button is used to search the lower frquency channel.
VOL+ button is used to search the higher frequency channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning(continued)
Skip
Skip
After the programs are presetted, you can skip some
programs so that to select your favorite channels only.
1. Press CH+/- button or
Direct-digit Choosing button to
select a channel directly (take
channel 1 for example).
2.Press MENU button repeatedly
to select the TUNING menu.
Direct-digit Choosing
Button
TUNING
POSITION
BAND
SKIP
SEARCH
1
VH
OFF
A
B
C
3. Press CH+/- button and move
the indicator to SKIP.
84.13MHZ
SELECT
ADJUST
CH+
TUNING
POSITION
BAND
SKIP
4. Press VOL+/- button to set it
ON.
1
VH
ON
A
VOL-
VOL+
B
MENU
CH-
C
SEARCH
84.13MHZ
SELECT ADJUST
5. Press MENU button to close the menu. When you
select channels with CH+/- button, this channel will be
skipped. However, you can also use the Direct-digit Choosing
button on the remote control to select this channel ditectly.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the number of the
channel to be recovered.
2. Do the above steps again.
3. Press VOL+/- button to set SKIP OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture and the Sound
Multiple picture modes
DYNAMIC
How to select the picture mode
You may select the mode you want from the
five preset modes and one individual mode.
STANDARD
P.STD
MILD
Press the P. STD button to select a mode you
like.DYNAMIC PICTURE, STANDARD
PICTURE, MILD PICTURE, MEMORY,
PICTURE MUTE and COLOR MUTE,
totally six picture modes can be selected
alternately.
MEMORY
PICTURE MUTE
COLOR MUTE
MODE
DYNAMIC
STANDARD
MILD
PICTURE QUALITY
BRIGHT COLOUR
MEDIUM COLOUR AND BRIGHTNESS
LOW COLOUR AND BRIGHTNESS
SET BY YOURSELF
MEMORY
PICTURE MUTE NO PICTURES
COLOR MUTE
BLACK AND WHITE
Set the parameter of MEMORY
1. Press MENU button repeatedly to select the PICTURE
menu. Press CH+/- to select
ADJUST and VOL+ to enter the
submenu.
PICTURE
ADJUST
TDX
ON
NORMAL
ON
A
B
ZOOM
B.B
C
CH+
2. Press CH+/- button, move the
indicator to the option you want to
adjust, then press VOL+/- button to
do the adjustment. Then the
parameter will be automatically
stored in MEMORY option.
SELECT
CONFIRM
PICTURE
VOL-
VOL+
MENU
CH-
CONTRAST
BRIGHT
COLOR
TINT
100
50
50
60
A
B
C
SHARP
50
84.13MHZ
SELECT
ADJUST
VOL+
OPTION
VOL-
CONTRAST
BRIGHT
COLOR
STRONG
BRIGHT
THICK
WEAK
DARK
LIGHT
SOFT
SHARP
SHARP
PURPLE
TINT
GREEN
TDX: You can make BRIGHT, SHARP, TREB and BASS have
a change simultaneously by setting TDX ON.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture and the Sound
(continued)
Multiple Sound Modes
How to select the sound mode
You can quickly select you most favored
sound mode from the following four
kinds of modes.
S.STD
THEATER
NEWS
MUSIC
1.Press the S.STD button to select the
sound quality that you want.THEATER
,NEWS,MUSIC, and PERSONAL can be
selected in turn.
\
PERSONAL
2.Press the
\
button to select the
acoustics quality that you want.SURROUND OFF,
SOURROUND MONO,SURROUND STEREO 1,
SURROUND STEREO 2 can be selected in turn.
Setting the sound
CH+
This function can let you regulate the volume to the
preconcerted parameter quickly.
VOL-
VOL+
MENU
CH-
SOUND
ADJUST
1. Press the MENU button
repeatedly to select the SOUND
menu and VOL+ to enter it .
A
B
C
SELECT
CONFIRM
2.Press VOL+/- button, move
to the BASS , then press
CH+/- button to
SOUND
R
adjust the parameter
you expect. Withthe same
method, you can adjust the
parameter of the TREB or
the BALN.
A
B
C
L
BALN
TREB
BASS
SELECT
ADJUST
3.Press theS.STD button repeatedly to select the
different sound setting modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture and the Sound
(continued)
S.C.C, count,AUTO OFF and mute
How to use the S.C.C(soft change channel)
This TV set provides you with the function of S.C. C.
When it isset "ON", thepicture will fadein and fade
out when the channel is changed.
FUNCTION
1. Press MENU button repeatedly
to select the FUNCTION menu.
LANG.
CURTAIN
TIMER
ENGLISH
I
CH+
A
B
C
POS.SWAP
S.C.C.
AUTO OFF
OFF
OFF
2.Press CH+/- button, move
the indicator to the S.C.C,
then press VOL+/-button to
set it ONor OFF.
VOL-
VOL+
MENU
CH-
SELECT
ADJUST
How to use the AUTO OFF function
When it is set ON,if there is no operation on the TV
for 2 hours,the TV set will change to the standby
mode automatically.
How to use the COUNT function
This TV set provides you with the function of COUNT,
if you want to know how long your TV set has been
used, you can press DISP button twice , then you can
know the timethe TV has been on(countfrom 0 after
100,000 hours).
The time displayed is the total time when you watch the
TV(time of standby status will not be included), the
number cannot be altered through operating by the
remote control or on the TV set.
How to use the MUTE function
When you want to pay attention to the environment or
answer a telephone, or to meetguests, using themute
function is veryconvenient.
1.Press
button, a sign will
appear at the button left corner
of the screen, and the sound of
the TV set is cutoff.
2.In order to recover the sound, press button again
or press VOL+/-button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer
This TV set provides you with three timer functions such as timer on, timer off
and sleep off.
Timer off
Timer off
Using this function can turn the TV set automatically
into standby status at the preconcerted time.
TIMER
1. Press MENU button
repeatedly to select the
OFF TIMER ONCE
19:00
A
B
FUNCTION menu, then press
CH+/- to select TIMER and
VOL+ to enter the submenu.
ON TIMER
OFF
22:00
0
C
POSITION
CLOCK
APPOINTMENT
CH+
1:40
SELECT ADJUST
2.Press CH+/- button, move
the indicator to OFF
VOL-
VOL+
MENU
CH-
TIMER, then pressVOL+/-
button to set it ONCE ,
EVERY,or OFF.
TIMER
OFF TIMER ONCE
19:00
A
B
ON TIMER
OFF
22:00
0
C
POSITION
CLOCK
APPOINTMENT
3.Press CH- button, move
the indicator to the next
row. Then, press VOL+/-
button to set the time.
1:40
SELECT ADJUST
TIMER
4.Press CH+/- button, move
the indicator to CLOCK,
press VOL+/- button, and you
can set the time(It will be the
standard of the clock of
TIMER ON/OFF).
OFF TIMER ONCE
19:00
CH+
A
B
ON TIMER
OFF
22:00
0
C
POSITION
CLOCK
APPOINTMENT
VOL-
VOL+
MENU
CH-
1:40
SELECT ADJUST
Repeatedly press VOL+/-button,
the time changeswith a rateof
one minute;
Press the buttonwithout
releasing, the timechanges with
a rate often minutes.
TIMER
OFF TIMER ONCE
19:00
A
B
ON TIMER
OFF
22:00
0
C
POSITION
CLOCK
APPOINTMENT
1:40
SELECT ADJUST
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer (continued)
Sleep timer and timer on
Sleep timer
Using this function, the TV set can be changed into the
standby status after a period of preset time from when
this function is activated.
1.The utmost time for this function is
120 minutes, and the time interval is
10 minutes.There are totally 12 kinds
of off-time.
2.Press the
button repeatedly,
the screen will show in turn as the
right form.
Timer on
When this function is used, the TV set can
automatically turn the power on at the preset time in
the standby statusand display thepreset program.
1. Press MENU button repeatedly to select FUNCTION menu,
then press CH+/- to select TIMER and VOL+ to enter the
CH+
FUNCTION
submenu.
LANG.
CURTAIN
TIMER
POS.SWAP
S.C.C.
AUTO OFF
ENGLISH
I
2.Press CH+/- button, move
the indicator tothe ON
TIMER, then pressVOL+/-
button to set it ONCE ,
EVERY or OFF.
VOL-
VOL+
MENU
CH-
A
B
C
OFF
OFF
SELECT
ADJUST
3.Press CH- button, move
the indicator to the below.
Then, press VOL+/-button to
set the time.
TIMER
OFF TIMER EVERY
19:00
A
ON TIMER
EVERY
22:00
0
B
C
POSITION
CLOCK
APPOINTMENT
CH+
1:40
4.Press CH+/- button, move
the indicator to
POSITION 0, pressVOL+/-
button to set the channel
with which the TV is turned
on(take 5 forexample).
SELECT
ADJUST
VOL-
VOL+
MENU
CH-
TIMER
OFF TIMER EVERY
19:00
A
ON TIMER
EVERY
22:00
5
B
C
POSITION
CLOCK
APPOINTMENT
1:40
5.Press CH+/- button, move
the indicator toCLOCK,
press VOL+/- button, and you
SELECT ADJUST
can set thetime(same as TIMER OFF andit will bethe
standard of theclock of TIMER ON/OFF).
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer (continued)
The channels appointment function can help you conveniently preset as many
as six programsat a time. Atthe preset time, the TV set will automatically
change to thepreconcerted channel. Iftwo or moreprograms are setin a same
time, the last channel number will be selected.
Channels appointment
Channels appointment
1. Press MENU button
TIMER
repeatedly to select the
OFF TIMER EVERY
FUNCTION menu, then press
CH+/- to select TIMER and
VOL+ to enter the submenu.
19:00
EVERY
22:00
0
CH+
A
ON TIMER
B
C
POSITION
CLOCK
APPOINTMENT
1:40
VOL-
VOL+
MENU
CH-
2.Press CH+/- button, move
the indicator toCLOCK,
press VOL+/- button, and you
can set the time(same as
TIMER OFF and it will be the
SELECT
ADJUST
standard of theclock ofAPPOINTMENT).
APPOITMENT
POS.
100
000
000
000
000
000
TIME
OFF
OFF
OFF
OFF
OFF
OFF
3.Press CH+/- button, move
the indicator to
APPOINTMENT, then press
VOL+ button to enter the
sub-menu.
4.Press VOL+/- button to set
the channel number you want
(e.g. 100).
CH+
APPOITMENT
POS.
100
000
000
000
000
000
TIME
OFF
OFF
OFF
OFF
OFF
OFF
5.Press CH- button to enter
the TIME item.Press VOL+/-
button to set the time.
VOL-
VOL+
MENU
CH-
Repeatedly press VOL+/-button,
the time changeswith a rateof
one minute;
Press the buttonwithout
releasing, the timechanges with
a rate often minutes.
APPOITMENT
POS
100
000
000
000
000
000
TIME
12:58
OFF
OFF
OFF
OFF
OFF
.
6.Press the CH- button, and
follow the instructions of step
4 and 5, you can do the setting
of the next channel.
DISP
7.Press DISP button to exit
the menu.
At the presettime, the TV set willautomatically change
to the preconcertedchannel;
This function is available onlywhen the TV set ison, and
it cannot beused in thestatus of standbyor power off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the other Function
Language and screen protection
How to select the language on the screen
FUNCTION
ENGLISH
1. Press MENU button
repeatedly to select the
FUNCTION menu.
LANG.
CURTAIN
TIMER
I
A
B
C
CH+
POS.SWAP
S.C.C.
AUTO OFF
OFF
OFF
SELECT
ADJUST
VOL-
VOL+
MENU
CH-
2.Press CH+/- button, move
the indicator to LANG., then pressVOL+button to
select the language and the menu on the screen will
be displayed with the language you select.
Note:You can not adjust the item when there is only one
language OSD and the item may not appear.
How to activate the function of screen protection
If no signal has been received
by the TV set, whenthe B.B
function is set ON, the screen
will change into the form on
the right shows .
CH+
VOL-
VOL+
MENU
CH-
Press MENU button repeatedly to
select the PICTURE menu. Press
CH+/- to select B.B, and press
VOL+/- button to set it ON.
PICTURE
ADJUST
TDX
ZOOM
B.B
ON
NORMAL
ON
A
B
C
SELECT
ADJUST
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the other Function(continued)
Curtain function and calendar display
How to use the Curtain function
This TV set provides three types of Curtain function
for you to select.
CH+
1. Press MENU button repeatedly to select the FUNCTION
menu.
VOL-
VOL+
MENU
CH-
2.Press CH+/-, and move the
indicator to CURTAIN,
then press VOL+ to select
from I,II andIII.
I: curtain
II : fade in and fade out
III: mixed Iand II
FUNCTION
ENGLISH
LANG.
CURTAIN
TIMER
I
A
B
C
POS.SWAP
S.C.C.
AUTO OFF
OFF
OFF
SELECT
ADJUST
How to use the CALENDAR function
CALENDAR
This TV set has been designed to store the calendar
from the year 1901 to 2050.
1.Press the CALENDAR
OCT 2002
button and then the
calendar will appear on
the screen(Press the
SU
MO
TU
WE TH
FR
SA
CALENDAR button again
to conceal the display).
CH+
VOL-
VOL+
MENU
CH-
2.Press CH+/- button to adjust the YEAR,press VOL+/-
button to adjust the MONTH.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the other Function(continued)
The function of channel exchange will enable you to exchange any two programs
and you can conveniently adjust the order of the programs due to your own need.
Channel exchange
Channel Exchange
for example, to change between channel1 and 9
FUNCTION
1. Press MENU button
repeatedly to select the
FUNCTION menu.
CH+
LANG.
CURTAIN
TIMER
ENGLISH
I
A
B
C
POS.SWAP
S.C.C.
AUTO OFF
VOL-
VOL+
MENU
CH-
OFF
OFF
SELECT
ADJUST
2.Press CH+/- button, move
the indicator to POS.SWAP,
Then press VOL+button to
enter the sub-menu.
FUNCTION
POS1
POS2
SWAP
BACK
1
9
?
A
B
C
The number shown in
POS1 and POS2is the
number of thepresent channel.
SELECT
ADJUST
FUNCTION
3.Press CH+/- button, move
the indicator to POS2,
then press VOL+ button to set
the channel number to 9.
POS1
POS2
SWAP
BACK
1
9
?
Direct-digit Choosing
Button
A
B
C
SELECT
ADJUST
CH+
4.Press CH+/- button, move
the indicator to SWAP,
then press VOL+button to
confirm.Then the programs of
the two channel will be
exchanged.
VOL-
VOL+
MENU
CH-
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock
This TV set provides you with the LOCK function, you can choose it due to your
need to protect your TV set.
Changing your password
Changing your password
This TV set can set a four digit password, the original
one is 0000, if you want to reset it, please follow the
instructions below.
LOCK
LOCK SET UP
PASSWORD ----
1.Press LOCK button, the
screen will showas the form
on the right.
CH+
2.Press the 0 button four times,
and enter the menu of LOCK
LOCK SET UP
CHANGE PW.
VOL-
VOL+
MENU
CH-
TUNING LOCK
PRESET PROG.
AV LOCK
GAME LOCK
CHILD LOCK
MAX. VOLUME
UNLOCK
OFF
OFF
OFF
OFF
OFF
OFF
setting. Press CH+/- button
and move theindicator to
CHANGE PASS. , and press
VOL+ button to enter the
sub-menu of change
password.
3. Press the Direct-digit
Choosing button and input a
four-digits password.
CHANGE PW.
NEW PW.
----
4. After inputting the new
password, return to the
original status as shown on
the right form, then, you can
input the newpassword to
enter the menu of LOCK
setting.
LOCK SET UP
PASSWORD
----
Direct-digit Choosing
Button
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Lock(continued)
Setting the Lock
Setting the Lock
There are several lock setting, you
can set it due to your need.
LOCK
LOCK SET UP
PASSWORD ----
1.Press the LOCK button, the
screen will showas the form
on the right.
CH+
2.Press the Direct-digit
Choosing button 0 for four
times( or inputthe password
you set), and enter the menu
of LOCK.
LOCK SET UP
CHANGE PW.
TUNING LOCK
PRESET PROG.
AV LOCK
GAME LOCK
CHILD LOCK
MAX. VOLUME
UNLOCK
VOL-
VOL+
MENU
CH-
OFF
OFF
OFF
OFF
OFF
OFF
3.Press CH+/- button, move
the indicator toTUNING LOCK, then press VOL+button
to set itON or OFF.
Note:
1.When theTUNING LOCK is set ON, you can notenter the
TUNING menu.
2.The PRESETPROG allows youto turn onthe TV always with
one channel.
3.WhenAV LOCK is setON, av cannotbe used, hencethe
screen will changeinto black andindicate that ithas been
locked. The TV set will be inthe state ofmute.
4.When theGAMEOCK is setON, you cannot play thegame.
5.When theCHILD LOCK isset ON, ifthe buttons onthe TV
are pressed, itwill indicate thatthe TV set is inthe status of
Direct-digit Choosing
Button
CHILD LOCK, andthe buttons won'twork.
6.The MAXVOLUME allows youto set afigure of thetop limit of
volume.
7.The UNLOCKallows to youto set allthe lock toOFF .
Download from Www.Somanuals.com. All Manuals Search And Download.
Game
This TV set provides you with the SNAKE game, after entering the game,
except the buttons that are appointed in the game( for example, the game button,
VOL+/-and CH+/-, etc.)and the DC Standby button, the other buttons cannot be
used.
Game control buttons and method of playing the game
Game control buttons
Pause button
CH+
MODE
Used to turn
up or down
VOL-
VOL+
MENU
CH-
To select the background
when playing game
GAME
EXIT
To restart the game
To exit game
Used to turn left or right
Method of playing the game
1.Press GAME button to start the game.
2.On the screen, the snake figures in yellow is
operated by you. Press CH+/- and VOL+/- buttons to
move the submarine up, down, left or right to change the
position (the head of the snake can not crash the side of the squareness, otherwise, game
is over) and devour the food (in red). Press MENU button on the remote control to pause.
You will get a mark of 100 when the snake eats a .
3.You can press the GAME button to restart the
game when it is GAME OVER or during the process of
the game.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Additional Equipments
Connecting additional equipments
You can connect the DVD,VCR and stereo system to theAV output to enjoy a
higher quality of picture and sound effect.
Signal flow
White (Audio leftchannel)
Red (Cr and audio rightchannel)
Blue (Cb)
Green (Y)
Yellow (Video)
VCR or other recorderunits
Video output
Audio output
Laser DVD withoutput terminal
DVD, VCD or otherunits
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before calling service personnel, please check the following chart for a
possible cause to the trouble you are experiencing.
Symptom
Check these things
TV is not
turned on
Be sure the power cord is plugged in.
The MUTE function may be used.
Adjust the volume of the TV set.
Goodpicture,
nosound
The contrast, colour and tint may be incorrectly adjusted.
If you change the direction of the TV while the TV is on, the picture
may suffer from colour shading. If so, turn off the TV and allow about
30 minutes to cool, then turn on the TV again.
Poor colour / tint,
good sound
The broadcast signal may be jammed by other electrical sources such
as cars, motorcycles, electric trains, high tension lines, neon signs, hair
dryers.
Spots appear
on the screen
The broadcast signal may be jammed by other TV receivers, personal
computers, andTVgames, aswellasinterferencefromradiostations.
Lines appear
on the screen
Interference may be due to broadcast waves reflected from mountains
or buildings.
Check if the direction of the antenna is changed.
Double images
or ghosts
The antenna may be disconnected or falling out.
Check if the direction of the antenna is changed.
Snowy picture or
black screen
The batteries in the remote control may be exhausted.
The batteries may be improperly installed.
Check if there are obstacles between the remote control and the
remote (infrared ray) receiver.
Check if there is strong light interference around the remote (infrared)
receiver.
Check if the main power is ON.
Remotecontrol
doesnotwork
Thefollowingconditionsarenottroubles
Clacking noise inside
the receiver
It may result from the expansion of the shell caused by a temperature
change. This will not affect the picture and sound quality.
Unevencolourina
certainportionofthe
screen
If the picture is too bright, this may occur according to the nature of
the pictures. Reduce the contrast, it may resume to normal.
CAUTION
In case of problems, have your TV serviced by qualified personnel.Never
attempt to service the set yourself since opening the cabinet may expose
you to dangerous voltage or other hazards.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
The specifications offered you here are only for reference and, with the improvement
of the products ,there may be some different between the description and the practicality.
Specifications
Color system
Sound system
PAL,AV NTSC 3.58,NTSC4.43
B/G,DK
21"color picture tube(the viewable dimension is 51cm)
Picture tube
Sound output
2X15W(others )
2X10W(21FA1(D),21TA1-BG)
21FA1(D),21TA1-BG
Power consumption
Dimensions (mm)
WXDXH)
603x475x430 (21T9D/21F9D)
576x475x458 (21F9K)
576x395x458 21F3A/21T3A
576x491x441 21FA1(D)/21TA1-BG
Warranty Card
Remote controller
Owner's manual
Battery(AA)
X1
X1
Accessories
X1
X2
Note : Warranty Card is only for the special country or area .
Sound output power and sound system may differ from different models and countries.
Power supply input list
Country or Area
Malaysia
Power supply input
~150V-250V, 50/60Hz
~90-240V, 50/60Hz
Korea
Yugoslavia
~220V-230V, 50/60Hz
Jordan, Oman, UAE, Pakistan, Lebann,
India, Yemen, Kuwait, Bahrain
~160V-250V, 50/60Hz
Indonisia
~150V-240V, 50Hz
Philippine, Sri Lanka
~150V-240V, 50/60Hz
New Zealand, Australia
~220V-240V, 50Hz
~220V, 50Hz
Hong Kong, Algeria, Nepal, Turkey
The actual voltage and frenquency of the TV set is different for the country or area.
NOTE
Design and specifications are subject to change without notice.
The dimension in this manual is a approximation.
Download from Www.Somanuals.com. All Manuals Search And Download.
V1.0
0090505101B
Download from Www.Somanuals.com. All Manuals Search And Download.
|