OWNER'S MANUAL
ATSC TV/DVD COMBO
TCR13
TCR20
TCF20
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
P.MODE
CH+
VOL
_
MENU
VOL
+
OK
S.MODE
CH-
STOP
REV
SETUP PAUSE/STEP SUBTITLE
FWD
PREV
NEXT
A-B
D.MENU
REPEAT
PLAY/ENTER
SLOW
ANGLE
TITLE/PBC SEARCH
AUDIO PROGRAM ZOOM
D.CALL
GUIDE
10+
EXIT
ARC
CH.LIST FAV.LIST
Before operating the unit, please read this manual thoroughly.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRICSHOCK
DO NOT OPEN
This symbol indicates thatdangerous
voltage constituting a riskof electrical
shock is present inthis unit.
CAUTION: TO REDUCETHE RISK OFELECTRIC
SHOCK, DO NOTREMOVE COVER (OR BACK).
NO USER SERVICEABLEPARTS INSIDE.REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
This symbol indicates thereare important
operating and maintenance instructions
in packaged with thisproduct.
Caution - Useof controls oradjustments or performanceof procedures otherthan those specified
herein may resultin hazardous radiationexposure
Product complies withradiation performance standardsunder the FederalFood, Drug andCosmetic Act
1. READ THESE INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. KEEP THESE INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED ALL WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW ALL INSTRUCTIONS
All operating and use instructions should be followed.
5.CLEAN ONLY WITH DRY CLOTH.
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning the exterior cabinet only.
6. DO NOT BLOCKANY VENTILATION OPENINGS. INSTALL INACCORDANCE WITH THE
MANUFACTURER`S INSTRUCTIONS.
7. DO NOT USE THIS APPARATUS NEAR WATER
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
PORTABLE CART WARNING
(symbol provided by RETAC)
10. Only use attachments/accessories specified by the manufacturer.
11.Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
12. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation,
to ensure reliable operation of the unit, and to protect it from overheating.
S3126A
These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided and/or the manufacturer`s instructions have been adhered to.
13. POWER SOURCES
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other sources, refer to the operating instructions.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety Instructions
14. GROUNDING OR POLARIZATION
Do not defeatthe safety purposeof the polarizedor grounding-type plug. A polarized plug hastwo
blades with onewider than theother. A groundingtype plug hastwo blades anda third grounding
prong. The wideblade or thethird prong isprovided for yoursafety. Ifthe provided plugdoes not
fit into youroutlet, consult anelectrician for replacementof the obsoleteoutlet.
15. Protect thepower cord frombeing walked onor pinched particularlyat plugs, convenience
receptacles, and thepoint where theyexit from theapparatus.
16. Unplug thisapparatus during lightningstorms or whenunused for longperiods of time.
17. Refer allservicing to qualifiedservice personnel. Servicingis required whenthe apparatus
has been damagedin any way, such aspower-supply cord orplug is damaged, liquid has been
spilled or objectshave fallen intothe apparatus, theapparatus has beenexposed to rainor
moisture, does notoperate normally,or has beendropped.
18. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall onto or against such power lines or
circuits. When installing an outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits, as contact with them might be fatal.
19. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric
shock.
20. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage
points or short out parts that could result in fire or electric shock. Never spill or spray any
type of liquid into the unit.
21. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable
system is grounded to provide some protection against voltage surges and built-up static
charges, Section 810 of the National Electrical Code (NEC), ANSI/NFPA70, provides
information with respect to proper grounding of the mastand supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
22. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety Instructions
23. DAMAGE REQUIRINGSERVICE
Unplug this unitfrom the walloutlet and referservicing to qualifiedservice personnel under
the following conditions:
a. When thepower-supply cord orplug is damaged.
b. If liquidhas been spilled, or objects havefallen into theunit.
c. If theunit has beenexposed to rainor water.
d. If theunit does notoperate normally byfollowing the operatinginstructions. Adjust
only those controlsthat are coveredby the operatinginstructions, as animproper
adjustment of othercontrols may resultin damage andwill often requireextensive
work by aqualified technician torestore the unitto its normaloperation.
e. If theunit has beendropped or thecabinet has beendamaged.
f. When theunit exhibits adistinct change inperformance, this indicatesa need for
service.
24. REPLACEMENT PARTS
When replacement partsare required, besure the servicetechnician uses replacementparts
specified by themanufacturer or thosethat have thesame characteristics asthe original part.
Unauthorized substitutions mayresult in fire, electric shock orother hazards.
25. SAFETY CHECK
Upon completion ofany service orrepairs to thisunit, ask theservice technician toperform
safety checks todetermine that theunit is inproper operating condition.
26. HEAT
The product should be situatedaway from heatsources such asradiators, heat registers,
stoves, or otherproducts (including amplifiers)that produce heat.
27. DISC SLOT
Keep your fingerswell clear ofthe disc slotas it isclosing. It maycause serious personal
injury.
28. CONNECTING
When you connectthe product toother equipment, turnoff the power and unplugall of the
equipment from thewall outlet. Failureto do somay cause anelectric shock andserious
personal injury. Read theowner's manual ofthe other equipmentcarefully and followthe
instructions when makingany connections.
29. SOUND VOLUME
Reduce the volumeto the minimumlevel before youturn on theproduct. Otherwise, sudden
high volume soundmay cause hearingor speaker damage.
30. SOUND DISTORTION
Do not allowthe product output to bedistorted sound fora long time. It may causespeaker
overheating and fire.
31. LASER BEAM
Do not lookinto the openingof the discslot or ventilationopening of theproduct to seethe
source of thelaser beam. Itmay cause sightdamage.
32. DISC
Do not usea cracked, deformed, or repaired disc. These discs are easily brokenand may
cause serious personalinjury and productmalfunction.
33. NOTE TO CABLE TVSYSTEM INSTALLER
This reminder is provided tocall the CableTV system installer's attention toArticle 820-40of
the NEC thatprovides guidelines forproper grounding and, in particular, specifies that the
cable ground shallbe connected tothe grounding systemof the building, as close tothe point
of cable entryas practical.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Installation
Antenna connection
If the picture is not clear or is snowy, it is recommended that an External Aerial
is used, this is usually mounted outside.
300 twin-lead cable
Antenna adapter
(Not supplied)
Aerial input
75 standard
coaxial type
75 coaxial cable
Plug
(Not supplied)
AC power socket
Note:
* It is recommended that a 75 ohm coaxial antenna is used to avoid
interference.
*To avoid interference from electrical signals, do not bind the antenna
cable together with any mains lead.
Preparation for the remote control
Battery installation
!
Remove the battery cover.
!
Insert two size AA batteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment.
Tips for remote operation
!When the remote control will not be used for a long period of time or when the
batteries are worn out, remove the batteries to prevent leakage.
!
Do not throw the batteries into fire. Dispose of used batteries in the specified
manner.
Do not drop, dampen or disassemble the remote control.
!
Download from Www.Somanuals.co5m. All Manuals Search And Download.
Parts and functions
Front panel the TV set
POWER
Power Indicator
Signal Receiver
Power Switch
The DVD Player
Play
the DVD
Channel Position
up/down
Menu
Video
R/L
Audio
TV/AV/DVD
Switching
Stop
the DVD
Open/close
the DVD
Volume up/ down
Rear panel of the TV set
COAXIAL OUTPUT
COMPONENT
Cb
Cr
Video Y input terminal
Video output terminal
Y
Video Cb inputterminal
Video Cr inputterminal
COAXIAL
OUTPUT
Antenna input socket
OUT
Audio right channeloutput terminal
Audio left channeloutput
terminal
IN
Audio right channelinput terminal
Audio left channelinput terminal
VIDEO1
L
R
Video 1
AUDIO1
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Buttons on the remote control
Power Switch
Open/close DVD Tray
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
TV / AV Mode Selection
TV / DTV Mode Selection
TV / DVD Mode Selection
Mute Sound
Q.VIEW
INFO
MUTE
Q.VIEW button: Return to Previous Channel
On Screen Display
1
5
2
6
0
3
4
Channel / Track Selection
SAP button: Second Audio Program
7
-
8
CC
CC Mode Selection: Closed captioning (selects mode).
- button: select additional channels being broadcasted.
For example, to select channel “54-3”, press “54”, “-”, “3”,
and then press “OK”.
9
SAP
P.MODE
CH+
P.MODE (picture mode):Adjust Picture Mode
Volume/Channel Adjusting
Go to TV Menu
VOL
_
MENU
VOL
+
Exit On Screen Display
OK
SLEEP
GUIDE
TV Sleep button
CH-
CH.LIST (channel list)
CH.LIST FAV.LIST
SIZE
GUIDE reference (may not operate using some systems)
FAV.LIST (favorite list) Enter
SIZE: Aspect Ratio Control under 16:9 digital signal input
DVD STOP Playback
PAUSE/STEP SUBTITLE
SETUP
FWD
STOP
REV
PREV
NEXT
A-B
DVD SETUP
DVD FAST REVERSE
D.MENU
REPEAT
DVD CAPTION (SUBTITLE) Selection
DVD PAUSE/STEP
SLOW
PLAY/ENTER
DVD PREVIOUS Chapter / Track
DVD FAST FORWARD
TITLE/PBC SEARCH
ANGLE
DVD NEXT Chapter / Track
DVD MENU
AUDIO PROGRAM ZOOM
D.CALL
DVD A-B REPEAT
DVD Playback / Confirm Menu Selection
UP
DVD REPEAT Mode
10+
CLR
LEFT
RIGHT
DVD Cursor Move button
DVD SLOW
DOWN
DVD ANGLE Change
DVD SEARCH
DVD TITLE
DVD AUDIO Mode
DVD INFORMATION
DVD PROGRAM
Zoom Function
10+
CLR: clear
7
Download from Www.Somanuals.com. All Manuals Search And Download.
The other video and audio equipment Connections
You can connect the DVD,VCR and stereo system to the output to enjoy a
higher quality of picture and sound effect.
Amplifier
To COAXIAL
type digital
audio input
Coaxial cable
ANT IN
COAXIAL OUT
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Antenna connections
Ifyouareusinganindoororoutdoorantenna,followtheinstructionsbelowthatcorrespondtoyourantenna
system. If you are using a cable TV service (CABLE), see the Cable TV connections.
Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the RF IN jack.
RF IN
jack
RF IN
jack
If using aflat UHF 300ohm twin-lead wire,
connect these flatwires to anoptional 75/300
ohm matching transformer/adapter(available
at many retailers), and then connectthe
adapter to the'RF' IN connectoron the back
of the television.
75 ohm
coaxial
cable
300-75 ohm
matching
transformer
Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300
ohm twin-lead wire to the 300-75 ohm matching
transformer. Attachthetransformertothecombiner,
then attach the combiner to the RF IN jack.
300-75 ohm
matching
transformer
RF IN
jack
Combiner
UHF 300 ohm
VHF 300 ohm
Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner. Attach the combiner
to the RF IN jack.
RF IN
jack
VHF 75 ohm
Combiner
UHF 300 ohm
Download from Www.Somanuals.com9. All Manuals Search And Download.
Cable TV connections
This unit has an extended tuning range and can tune most cable channels without using a CableTV
Converter box. Some cable companies offer "premium pay channels" in which the signal is
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device
which is generally provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable service not requiring a Converter/Descrambler
RF IN
box, connect the 75 ohm Coaxial Cable directly to the RF IN
jack
Jack on the back of the unit.
75 ohm
coaxial cable
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE
If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the
incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect
the output jack of the converter/descrambler box to the RF IN jack on the unit. Follow the connections shown
below. Set the unit to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the
converter/descrambler box to select channels.
Incoming
75 ohm
cable TV cable
RF IN
jack
75 ohm cable to
unit
Converter/
descrambler
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a converter/descrambler box, you may wish to use a signal splitter and an A/B switch box (available from the
cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B"
position, you can directly tune any nonscrambled channels on your unit. With the switch in the "A" position, tune your
unit to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box
to tune scrambled channels.
Incoming
75 ohm
cable TV cable
Converter/
descrambler
RF IN
jack
75 ohm cable
to unit
A
Splitter
A/B switch
B
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections for other equipment
Using the audio/video inputs
If you connect the TV to a camcorder or Video Game, you can select different modes by pressing
TV/AV.
Press TV/AV repeatedly to select the desired mode.
"AV1", "AV2" ,"COMPONENT","DVD" or TV channel will display on the screen for 4 seconds, No signal
will be displayed on the screen when there is no signal input.
AV 1
AV1
AV2
COMPONENT DVD
TV Channel
To connect the TV to a camcorder
To playback from the camcorder, connect the camcorder to the unit as shown.
Camcorder
Front of TV
VIDEO IN
To Audio/Video OUT
AUDIO IN (R)
AUDIO IN (L)
Audio/Video cord (not supplied)
To connect the TV to a Video Game
The TV can also be used as a display device for many video games. However, due to the wide variety
of formats, they have not all been included in the suggested connection diagram. Youl need to consult
each component's Owner's Manual for additional information.
Front of TV
VIDEO IN
Video Game
AUDIO IN (R)
AUDIO IN (L)
To Audio/Video OUT
Audio/Video cord (not supplied)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the language and blue screen
You can choose from three different
languages (English, French and
Spanish) for the on-screen displays.
SETTING THE LANGUAGE
1 Press POWER ( ) toturn on theTV.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
0101
2 Press MENU, and then
press VOL+/- button to
1
5
2
6
0
3
4
FUNCTION
select FUNCTION menu,
then press CH- button to
enter.
7
-
8
CC
LANGUAGE
ENGLISH
ON
C1
BLUE SCREEN
NTSC CAPTION
PARENTALLOCK
9
SAP
P.MODE
CH+
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
3 Press CH+/- button to select the LANGUAGE option,
then press VOL+/- to select the desired language:
English, Spanish orFrench.
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
4 Press MENU until the MENU screen disappears.
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
SETTING THE BLUE SCREEN
10+
CLR
1 Press MENU, and then
0101
press VOL+/- button to
select FUNCTION menu,
then press CH- button to
enter.
FUNCTION
ENGLISH
LANGUAGE
BLUE SCREEN
NTSC CAPTION
PARENTALLOCK
ON
C1
2 Press CH+/- button to select the BLUE SCREEN option,
then press VOL+/- to select OFF or ON.
3 Press MENU until the MENU screen disappears.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel menu
This describes the case for searching and memorizing channels for DTV/ATV.
AUTO SCAN (DTV/ATV)
(When using antenna)
The channels broadcasted in DTV and ATV are
automatically scanned and memorized. Only the
receivable channels in the area where this TV is
used will be memorized.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
1
5
2
6
0
3
4
AUTO SCAN (CATV)
(When using basic cable)
The channels broadcasted in CATV are automatically
scanned and memorized.
7
-
8
CC
9
SAP
P.MODE
CH+
NOTE:
Be sure thatantenna or cableis connected properlybefore plugging the
power cord.
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
1 Press MENU, and then press VOL+/- button to select
CHANNEL menu, then press CH- button to enter.
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
2 Press CH+/- button to
select the RECEPTION
option.
D.MENU
A-B
REPEAT
0101
SLOW
PLAY/ENTER
CHANNEL
ANGLE
TITLE/PBC
SEARCH
D.CALL
SKIP
OFF
AIR
RECEPTION
AUTO SCAN
COLOR SYSTEM
AUDIO PROGRAM ZOOM
3 Press VOL +/- button
to select AIR/ CABLE.
AUTO
10+
CLR
4 Press CH +/- button
to select AUTO SCAN option.
Only in analogsignal
5 Press VOL+ button to start scanning.
When you pressVOL+ on the remote control,
scanning the channels in both analog and digital
modes will automaticallystart.
When scanning is completed, the memorized
smallest channel will be displayed.
When you press the MENU button while scanning, the
scanning is interrupted and the lowest memorized
channel is displayed.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel menu
SETTING SKIP
After the programs are preset, you can skip some
programs to select your favorite channels only.
1 Press MENU, and then
press VOL+/- button to
select CHANNEL menu,
then press CH- button to
0101
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
CHANNEL
enter.
Q.VIEW
INFO
MUTE
SKIP
OFF
AIR
RECEPTION
AUTO SCAN
COLOR SYSTEM
1
5
2
6
0
3
4
2 Press CH+/- button to
select the SKIP option,
then press VOL+/- button
to select ON or OFF.
AUTO
7
-
8
CC
9
SAP
P.MODE
CH+
VOL
_
MENU
VOL
+
NOTE: When tuning DTV channels and no signal is present,
the SKIP-over option will be available.
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
If you wantto recover the skipped channel
STOP
REV
PREV
FWD
NEXT
1. Use Direct-digit Choosing button to select the number
of the channel to be recovered.
2. Do the above steps again.
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
3. Press VOL+/- button to set SKIP as Off.
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
10+
CLR
SETTING COLOR SYSTEM(only in ATV mode)
1 Press MENU, and then
press VOL+/- button to
0101
select CHANNEL menu,
then press CH- button to
enter.
CHANNEL
SKIP
OFF
AIR
RECEPTION
AUTO SCAN
COLOR SYSTEM
AUTO
2 Press CH+/- button to
select the COLOR
SYSTEM option, then
press VOL+/- button
to select AUTO or NTSC.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel selection
You can select the channel by using either CH +/- button
or Channel number buttons. How to select the channel
in each way is shown below.
1 Using CH +/- button
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Using CH +/- button on the remotecontrol, change thechannel.
Same operation isavailable with CH +/- button on the frontpanel
of the mainunit.
Q.VIEW
INFO
MUTE
1
5
2
6
0
3
4
Press the Direct Channel selection buttons to select the channel.
2
7
-
8
CC
Antenna Mode Direct Channel Selection
When the Antenna/Cable menu option is in the Antennaposition, all channels
can be instantly selected by using
digits button. For example:
9
SAP
P.MODE
CH+
2-9: Press 2-9 as needed.
Example, to select channel 2, press"2".
10-69: Press the 2 digits inorder. If you select the channel higherthan 69,
the channel will not change, becauseit is not available.
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
CABLE Mode Direct Channel Selection
When the Antenna/Cable menu option is in the Cable position, channels
can be selected as follows:
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
1-9: Press 1-9 asneeded. Example, to selectchannel 2,
press "2".
10-99: Press the 2digits in order. Example, to select channel 32,
press "3" then "2".
100-125: Press the digital1 button, the "1--"will appear
on the screen, thenpress the 2 digitsof remain in order.
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
SEARCH
D.CALL
ANGLE
TITLE/PBC
CABLE
TV
AUDIO PROGRAM ZOOM
VHF
2-13
VHF
2-13
10+
CLR
UHF
14-69
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
NOTE:
In the DTV broadcasting, one channel sometimes broadcasts
multiple programs depending on the air time. In this case, the
main channel is called major channel and the sub channel is
called minor channel.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume adjustment
This section describes how to adjust the volume when
viewing TV. The MUTE function, which is useful when
you have a visitor or a phone call, will be also described.
1 Using VOL +/- button
You can adjust theaudio volume withVOL +/- button on
the remote control.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
The volume bar is displayed at the bottom of the screen
when adjusting the volume.
Same operation isavailable with VOL +/- on the front
panel of themain unit.
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
P.MODE
CH+
2 Using MUTE button
Press MUTE button on the remote control to mute the
sound.
The colored volume bar is displayed on the screen while
muting.
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
To release theMUTE status, press MUTE button again
or press VOL+ button.
PREV
FWD
NEXT
MUTE will displayedcontinuously when CCis OFF, MUTE
will disappear 5 seconds later when CC is ON.
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
SWITCHING AUDIO
This section describes how to switch the audio language
in the digital mode.
AUDIO PROGRAM ZOOM
10+
CLR
2 Switch the audio language.
When you pressSAP button on the remote control, the
currently selected language and the number of received
languages will be displayed on the screen.
Every time you press SAP button on the remote control,
the language will be switched.
Languages you can switch differ depending on the
receiving broadcast.
NOTE:
Pressing the SAPbutton works only with some TV channels,
and does not work with external equipment such as DVD players.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen information
You can display the currently selected channel number or
other information such as the audio mode on the screen
for checking.
In the analog mode, the currently selected channel
number and the audio mode are displayed.
1 Display the channel number and the audio mode.
Press INFO button on the remote control.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
The currently selected channel number and the audio
mode are displayed at the top right of the screen.
Q.VIEW
INFO
MUTE
1
5
2
6
0
3
4
13
AUTO
7
-
8
CC
9
SAP
P.MODE
CH+
To clear thedisplay, press INFO button again.
VOL
_
MENU
VOL
+
In the digitalmode, the detailedinformation for the
currently selected channel such as the program
GUIDE is displayed.
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
Display the detailed information for the channel.
Every time you press INFO button, the display mode
will be switched as below.
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
INFORMATION
SLOW
PLAY/ENTER
14.1
DTV-AIR
ENCODE
17:00-18:30
9.2
1
2
3
America Masters
4
5
6
ANGLE
TITLE/PBC
SEARCH
D.CALL
ENGLISH
1/3 CC
Satchmo: The Life of Lauis
Armstrong A self-taught
AUDIO PROGRAM ZOOM
10+
CLR
The following information is displayedin the INFOmode.
(1) Program airtime
(2) Channel number
(3) Closed caption
(4) Channel title
(5) Audiolanguage
(6) Program content
NOTES:
When the program guide is displayed in more than 6 lines, use VOL+/-
button and scroll for reading.
"No description provided" is displayed when the program guide is not
provided.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Video menu
SETTING VIDEO
1 Press MENU button. The main menu screen will appear.
2 Press VOL+/- button to
select VIDEO Option,
0101
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
then press CH- button
to enter.
VIDEO
Q.VIEW
INFO
MUTE
CONTRAST
BRIGHTNESS
COLOR
80
80
50
50
0
1
5
2
6
0
3
4
SHARPNESS
TINT
7
-
8
CC
9
SAP
P.MODE
3 Press CH+/- to select the desired option, then press
VOL+/- to adjust.
CH+
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
Contrast
This will adjustthe intensity ofbright parts inthe picture butkeep
the dark partsunchanged.
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
Brightness
This will adjustthe light outputof the completepicture, which will
mainly affect the darker areasof the picture.
SLOW
PLAY/ENTER
SEARCH
D.CALL
ANGLE
TITLE/PBC
Color
This will adjustthe saturation levelof the colorsto suit your
personal preference.
AUDIO PROGRAM ZOOM
10+
CLR
Sharpness
This will adjustthe sharpness offine details inthe picture.
Tint
Allows you toselect the colormix (Tint) of the picture.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio menu
SETTING AUDIO
1 Press MENU button. The main menu screen will appear.
2 Press VOL+/- button to
select AUDIO Option,
0101
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
then press CH- button
to enter.
AUDIO
Q.VIEW
INFO
MUTE
VOLUME
20
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
3 Press CH+/- to select
the desired option, then
press VOL+/- to adjust.
P.MODE
CH+
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
Volume
This will adjustthe sound outputlevel.
CH-
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
10+
CLR
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual time setting
EXAMPLE: Setting the time to "8:30AM"
You must set the time manually
for ON/OFF Timer.
TO SET TIME
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- button to
select TIME option,
then press CH- button
0101
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
TIME
Q.VIEW
INFO
MUTE
to enter the submenu.
TIME
TIMER OFF
TIMER ON
--:-- AM
--:--AM
--:--AM
1
5
2
6
0
3
4
7
-
8
CC
3 Press CH+/- button to
select TIME, then press
CH+/- button to select
"--:--","AM";
press VOL+/- button to
set the value & AM &PM.
9
SAP
P.MODE
CH+
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
4 Press MENU until the MENU screen disappears.
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
10+
CLR
NOTE:
After apower failure ordisconnection of thepower, the
time will getlost. In thiscase, reset thepreset time.
Download from Www.Somanuals.co2m0. All Manuals Search And Download.
Setting the ON/OFF timer
This feature allows you to have the
SETTING THE TIMER ON
TV automatically turn on/off at a
predetermined time. If you program
1 Press MENU. The main menu screen will appear.
the ON/OFF TIMER, the TV will turn
on/off at the time your predetermined
time.
2 Press VOL+/- button to
select TIME option,
then press CH- button
0101
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
TIME
to enter the submenu.
Q.VIEW
INFO
MUTE
TIME
TIMER OFF
TIMER ON
--:-- AM
--:--AM
--:--AM
1
5
2
6
0
3
4
3 Press CH+/- button to
select TIME ON, then
press CH+/- button to
select "--:--","AM";
press VOL+/- button to
set the value.
7
-
8
CC
9
SAP
P.MODE
CH+
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
4 Press MENU until the MENU screen disappears.
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
SETTING THE TIMER OFF
SLOW
PLAY/ENTER
1 Press MENU. The main menu screen will appear.
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
2 Press VOL+/- button to
select TIME option,
then press CH- button
0101
10+
CLR
TIME
to enter the submenu.
TIME
TIMER OFF
TIMER ON
--:-- AM
--:--AM
--:--AM
3 Press CH+/- button to
select TIME OFF, then
press CH+/- button to
select "--:--","AM";
press VOL+/- button to
set the value.
4 Press MENU until the MENU screen disappears.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
SETTING THE NTSC CAPTION
This allows you to configure the way you choose to view
the captioning.
1. Press the MENU button and thenuse VOL+/- button to selectthe
FUNCTION menu.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
2. Press CH- button to enter,
0101
then press CH+/- button
to select NTSC CAPTION.
1
5
2
6
0
3
4
FUNCTION
7
-
8
CC
LANGUAGE
ENGLISH
ON
C1
3.Then use VOL+/- button to
select caption: OFF,C1, C2,
C MUTE,TEXT1, TEXT2.
BLUE SCREEN
NTSC CAPTION
PARENTALLOCK
9
SAP
P.MODE
CH+
Youcan also pressCC
button on theremote
control to selectthe
desired caption.
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
4. When you are satisfied with
your choice, press MENU
button to return to the
previous menu.
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
TITLE/PBC
SEARCH
D.CALL
CAPTION
ANGLE
The term for the words that scroll across the bottom of the TV
screen; usually the audio portion of the program provided for
the hearing impaired.
AUDIO PROGRAM ZOOM
10+
CLR
TEXT
The term forthe words thatappear in alarge black frameand
almost cover theentire screen; usuallymessages provided by
the broadcaster.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
An age limitation can be set to
forbid children to see and hear
violent scenes or pictures for
TO REGISTER PASSWORD
1 Press MENU. The main menu screen will appear.
adults, etc. The TV Corresponds
to "TV RATING" and "MOVIE RATING".
to use theparental control function,
you must register a password.
2 Press VOL+/- to select
FUNCTION, then press
CH- to enter the submenu.
0101
FUNCTION
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
LANGUAGE
ENGLISH
ON
C1
BLUE SCREEN
NTSC CAPTION
PARENTALLOCK
Q.VIEW
INFO
MUTE
3 Press CH+ to select
PARENTAL LOCK,
then press VOL+ to
enter the submenu.
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
P.MODE
CH+
PLEASE ENTER PASSWORD
####
4 Enter the password (4
digits) using the number
buttons(0-9).
The TV is set up with the
initial password 0000.
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
0101
D.MENU
A-B
REPEAT
PARENTALLOCK
SLOW
PLAY/ENTER
5 After inputting password
accurately, Press CH+/-
to select the desired item.
PARENTALLOCK
OFF
SEARCH
D.CALL
ANGLE
TITLE/PBC
PARENTALGUIDE
MPAARATING
NO RATING
VIDEO
UNBLOCK
UNBLOCK
AUDIO PROGRAM ZOOM
10+
CLR
NOTES:
If you forget the password, you cannot set the Parent Control.
To avoid forgetting thepassword, write itdown and keepit in a
safe place.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
TO CHANGE PASSWORD
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- to select
FUNCTION, then press
CH- to enter the submenu.
0101
FUNCTION
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
LANGUAGE
ENGLISH
BLUE SCREEN
NTSC CAPTION
PARENTALLOCK
ON
C1
Q.VIEW
INFO
MUTE
3 Press CH+ to select
PARENTAL LOCK,
then press VOL+ to
enter the submenu.
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
P.MODE
PLEASE ENTER PASSWORD
####
CH+
4 Enter the password (4
digits) using the number
buttons(0-9).
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
4 Press CH+ to select
CHANGE PASSWORD,
then press VOL+ to
enter the submenu.
PREV
FWD
NEXT
0101
D.MENU
A-B
REPEAT
PARENTALLOCK
SLOW
PLAY/ENTER
PARENTALGUIDE
MPAARATING
NO RATING
VIDEO
ANGLE
TITLE/PBC
SEARCH
D.CALL
UNBLOCK
UNBLOCK
CHANGE PASSWORD
AUDIO PROGRAM ZOOM
5 Enter the new password using
the number buttons(0-9).
10+
CLR
ENTER ANEW PASSWORD
####
6 Enter again the new password.
PLEASE INPUT AGAIN
####
NOTES:
If you forget the password, you
cannot set the Parent Control.
To avoid forgetting the password,
write it down and keep it in a safe
place.
7 Press MENU until the MENU screen disappears.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Function menu
TO SET PARENTAL CONTROL ON/OFF
1 Enter the PARENT CONTROL menu.
2 Press CH+/- button to
select PARENTAL LOCK,
0101
press VOL+/- button to
set ON or OFF.
PARENTALLOCK
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
PARENTALLOCK
PARENTALGUIDE
MPAA RATING
NO RATING
OFF
Q.VIEW
INFO
MUTE
UNBLOCK
UNBLOCK
3 When you are satisfied
with your choice, press
MENU button to returnto
the previous menu.
VIDEO
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
P.MODE
CH+
TO SET PARENTAL GUIDE
VOL
_
MENU
VOL
+
1 Enter the PARENT CONTROL menu.
OK
SLEEP
GUIDE
CH-
2 Press CH+/- button to
select PARENTAL GUIDE,
press VOL+ button to
CH.LIST FAV.LIST
SIZE
0101
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PARENTALLOCK
enter the submenu.
PREV
FWD
NEXT
PARENTALLOCK
PARENTALGUIDE
MPAA RATING
NO RATING
OFF
D.MENU
A-B
REPEAT
3 Press CH+/-/VOL+/- button
to set the desired ratings.
UNBLOCK
UNBLOCK
VIDEO
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
4 When you are satisfied
with your choice, press
MENU button to returnto
the previous menu.
AUDIO PROGRAM ZOOM
RATING
10+
CLR
ALL FV
D
L
S
V
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
Ratings for Television programs
including made-for-TV movies:
TV-Y (Allchildren)
TV-Y7 (Children7 years older)
TV-G (Generalaudience)
(
: BLOCK)
TV-PG (Parentalguidance suggested)
TV-14 (Parentsstrongly cautioned)
TV-MA (Mature audience only)
To use the TV after Parent Control is
activated.
TV Rating Children:
ALL (Age) (applies to TV-Y,TV-Y7)
FV (Fantasy Violence)(applies to TV-Y7)
When the program applied to theParental
Control setting is received, enter the
password. When the password is entered
correctly the protection will be temporarily
overridden.
TV Rating General:
ALL (Age)
(applies to TV-G, TV-PG,TV-14, TV-MA)
D (Dialogue - sexual dialogue) (applies to TV-PG,TV-14)
NOTE:
The Parental Control function is activated only on
programs and tapes that support the rating.
L (Language -adult language) (applies toTV-PG, TV-14, TV-MA)
S (Sex -sexual situations)
V (Violence)
(applies toTV-PG, TV-14, TV-MA)
(appliesto TV-PG,TV-14, TV-MA)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Function menu
TO SET THE MPAARATING
1 Enter the PARENT CONTROL menu.
2 Press CH+/- button to
select MPAARATING,
then press VOL+ button
0101
PARENTALLOCK
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
to enter the submenu.
PARENTALLOCK
PARENTALGUIDE
MPAA RATING
NO RATING
OFF
Q.VIEW
INFO
MUTE
UNBLOCK
UNBLOCK
VIDEO
1
5
2
6
0
3
4
7
-
8
CC
3 Press CH+/- button to select
the desired rating.
9
SAP
P.MODE
CH+
Rating for Moviespreviously shown intheaters:
VOL
_
MENU
VOL
+
Movie Rating
MPAARATING
NR
G
(Permits all programs)
(General audience)
OK
SLEEP
GUIDE
MPAA-X
MPAA-NC-17
MPAA-R
MPAA-PG-13
MPAA-PG
MPAA-G
CH-
PG
(Parental guidance suggested)
CH.LIST FAV.LIST
SIZE
PG-13 (Parents strongly cautioned)
(Restricted)
NC-17 (No one 17 and under admitted)
(Adult only)
SETUP PAUSE/STEP SUBTITLE
STOP
REV
R
PREV
FWD
NEXT
X
MPAA-NR
(
: BLOCK)
D.MENU
A-B
REPEAT
If you setPG-13 : Gand PG movies
will be available, PG-13, R, NC-17
and X willbe blocked.
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
10+
CLR
4 Press VOL+/- button to select delete or
.
5 Press MENU until the MENU screen disappears.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Closed caption
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display closed captioned television programs. Closed captioning
will display text on the screen for hearing impaired viewers or it will translate and display text in another language.
Captions: This closed caption mode will display text on the
screen in English or another language (depending on the set-
ting of the closed captions).
Generally, closed captions in English are transmitted on captions
CC 1 and closed captions in other languages are transmitted on
Captions CC 2.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
1
5
2
6
0
3
4
Text: The text closed caption mode will usually fill the screen
with a programming schedule or other information.
After selecting a closed caption mode, it will stay in effect until it
is changed, even if the channel is changed.
7
-
8
CC
9
SAP
P.MODE
If the captions signal is lost due to a commercial or a break in
the signal, the captions will reappear when the signal is received
again. If the channels are changed, the captions will be delayed
approximately 10 seconds. The captions will appear in places
on the screen where they will least interfere with the picture,
usually on the bottom of the screen. News programs will usually
show three-line closed captions which scroll onto the screen.
Most other shows provide two or three lined captions placed
near the character who is speaking so the viewer can follow the
dialogue. Words in italics or underlined describe titles, words in
foreign languages or words requiring emphasis. Words that are
sung usually appear enclosed by musical notes.
CH+
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
For television programs broadcasting with closed captions, look
in your TV GUIDE for the closed captions symbol (CC).
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
10+
CLR
NOTES:
When selecting closed captions, the captioning will be delayed approximately 10 seconds.
If no caption signal is received, no captions will appear, but the television will remain in the caption mode.
Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with
closed captioning, especially with live programs. This is because during live programs, captions are also
entered live. These transmissions do not allow time for editing.
When captions are being displayed, on-screendisplays, such as volume and mutemay be hidden. If the OSD
display appears, the closed caption willdisappear, When the OSDdisappears, the Closed Caption will appearagain.
Some cable systemsand copy protectionsystems may interferewith the closedcaptioned signal.
If using anindoor antenna orif TV reception is verypoor, the closed captiondecoder may notappear or
may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception
or use an outdoor antenna.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV setup menu
SETTING CLOSED CAPTION MODE
In DTV mode
1 Press MENU. The main menu screen will appear.
0101
2 Press VOL+/- button to
select DTV SETUP.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
DTV SETUP
Q.VIEW
INFO
MUTE
then press CH- button
to enter the submenu.
DTVCC
DAYLIGHT SAVING
TIME ZONE
OFF
ALASKA
1
5
2
6
0
3
4
ATSC PARENTAL LOCK
7
-
8
CC
3 Press CH+/- button to
select DTV CC.
9
SAP
It only appearswhen the
broadcasting signal bears.
P.MODE
CH+
4 Press VOL+ button and
then press CH+/- button
to select CAPTION MODE.
VOL
_
MENU
VOL
+
0101
OK
SLEEP
GUIDE
CH-
DTV SETUP
CH.LIST FAV.LIST
SIZE
5 Press VOL+ button and
then press VOL+/- button
to set the CLOSED CAPTION
"OFF"or "ON".
CAPTION MODE
USER SETTING
DTV CAPTION STYLE
SETUP PAUSE/STEP SUBTITLE
BROADCAST
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
When setting on, the DTV
CC option will be available.
SLOW
PLAY/ENTER
0101
SEARCH
D.CALL
ANGLE
TITLE/PBC
DTV SETUP
6 Press CH+/- button to
select DTV CC and press
VOL+/- button to set
AUDIO PROGRAM ZOOM
CLOSED CAPTION
DTV CC
OFF
SERVICE1
10+
CLR
the desired service.
SETTING DTV CC
This allows youto configure theway you chooseto view the
digital captioning.
Select one ofthe digital servicechannels made availableby
the caption provider.
There are 6standard services. Service1 is designatedas the
Primary Caption Service. This service containsthe verbatim,
or near-verbatim captions for theprimary language being
spoken in theaccompanying program audio.
Service 2 isdesignated as theSecondary Language Service.
This service containscaptions in asecondary language which
are translations ofthe captions inthe primary CaptionService.
The other servicesubchannels are notpre-assigned. It isup
to the discretionof the individualcaption provider toutilize
the remaining servicechannels.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV setup menu
SETTING THE CC USER SETTING
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- button to
select DTV SETUP.
then press CH- button
0101
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
DTV SETUP
Q.VIEW
INFO
MUTE
to enter the submenu.
DTVCC
DAYLIGHT SAVING
TIME ZONE
OFF
ALASKA
ATSC PARENTAL LOCK
1
5
2
6
0
3
4
3 Press CH+/- button to
select DTV CC.
7
-
8
CC
9
SAP
P.MODE
4 Press VOL+ button and
then press CH+/- button
to select USER SETTING.
CH+
0101
VOL
_
MENU
VOL
+
DTV SETUP
OK
SLEEP
GUIDE
CAPTION MODE
USER SETTING
DTV CAPTION STYLE
CH-
5 Press VOL+/- button to
set "BROADCAST"or
"CUSTOM".
BROADCAST
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
SETTING THE DTV CAPTION STYLE
The DTV caption style function lets you change the caption
size and font style.
SLOW
PLAY/ENTER
SEARCH
D.CALL
ANGLE
TITLE/PBC
When "USER SETTING" is set to CUSTOM, you can set
the following items.
AUDIO PROGRAM ZOOM
10+
CLR
1 Press CH+/- button to
select DTV CAPTION
STYLE.
0101
DTV SETUP
CAPTION MODE
USER SETTING
DTV CAPTION STYLE
BROADCAST
2 Press VOL+ button to
enter the submenu.
3 Press CH+/- button to
select the desired option.
0101
DTV SETUP
STYLE2
4 Press VOL+/- button to
adjust the option.
STYLE
SIZE
LARGE
WHITE
SOLID
NONE
TEXT COLOR
TEXT OPACITY
EDGE TYPE
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV setup menu
SETTING THE DTV CAPTION STYLE(continue)
Style
Select this optionto select thefont style ofcaption display
according to yourown preference.
Press the VOL+/- button to selectStyle1, Style2, Style3,
Style4,Style5, Style6, Style7, Style8.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
Size
Select this optionto select thesize of captiondisplay according
to your ownpreference.
Press the VOL+/- button to selectSmall, Standard or Large ,
1
5
2
6
0
3
4
7
-
8
CC
9
SAP
P.MODE
Text color
CH+
Select this option to select the text color or the opacity of the text
box of caption display according to your own preference.
Select a color and one of the opacity options.
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
Text Opacity: Specify theopacity for thetext color.
BG (Background) Color: Select abackground color.
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
BG (Background) Opacity: Select theopacity for the
FWD
NEXT
background color.
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
AUDIO PROGRAM ZOOM
10+
CLR
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV setup menu
SETTING THE DAYLIGHT SAVING
Daylight saving timeis automatically setby specially
broadcasted signals.
This menu itemallows you todisable the automatic
setting of daylightsaving time. Thisis useful ifyou live
in an areaor state wheredaylight saving isnot applied,
but you receivechannels from otherareas where daylight
saving signals arebroadcasted.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- button to
1
5
2
6
0
3
4
7
-
8
CC
0101
select DTV SETUP option,
then press CH- button
to enter.
9
SAP
P.MODE
DTV SETUP
CH+
DTVCC
DAYLIGHT SAVING
TIME ZONE
OFF
ALASKA
VOL
_
MENU
VOL
+
3 Press CH+/- button to
ATSC PARENTAL LOCK
OK
SLEEP
GUIDE
select DAYLIGHT SAVING,
then press VOL+/- button
to select ON for automatic
clock correction for daylight
saving time, based on
CH-
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
specially broadcasted signals.
Select OFF to disable automatic
clock correction based on the
specially broadcasted signals.
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
ANGLE
TITLE/PBC
SEARCH
D.CALL
SETTING THE TIME ZONE
AUDIO PROGRAM ZOOM
This function allowsyou to selectyour local timezone.
Broadcasted time informationwill correct theclock display
for your localtime.
10+
CLR
1 Press MENU. The main menu screen will appear.
2 Press VOL+/- button to
0101
select DTV SETUP option,
then press CH- button
to enter.
DTV SETUP
DTVCC
DAYLIGHT SAVING
TIME ZONE
OFF
ALASKA
3 Press CH+/- button to
select TIME ZONE option.
ATSC PARENTAL LOCK
4 Press VOL+/- button to
select your viewing area
time zone: NEWFOUNDLAND,
ATLANTIC, EASTERN, CENTRAL,
MOUNTAIN, PACIFIC, ALASKA,
HAWAII, or SAMOA
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV setup menu
SETTING ATSC PARENTAL LOCK
1 Press MENU. The main menu screen will appear.
2 Press CH+/- button to
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
0101
Q.VIEW
INFO
MUTE
select DTV SETUP.
then press VOL- button
to enter the submenu.
DTV SETUP
1
5
2
6
0
3
4
DTVCC
DAYLIGHT SAVING
TIME ZONE
OFF
ALASKA
7
-
8
CC
ATSC PARENTAL LOCK
9
SAP
3 Press CH+/- button to
select ATSCPARENTAL
LOCK.
P.MODE
CH+
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
4 Enter the password (4
digits) using the number
buttons(0-9).
The TV is set up with the
initial password 0000 and
enter next submenu.
CH-
ENTER CODE ####
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
0101
SLOW
PLAY/ENTER
DTV SETUP
ANGLE
TITLE/PBC
SEARCH
D.CALL
VERSION
DIMENSION
CLEAR RRT
[RRT0]
AUDIO PROGRAM ZOOM
10+
CLR
Version
V-chip broadcast source version.
Dimension
Use when viewing non-TV broadcast programming.
Clear RRT
CLEAR Rating Table (RRT) information:
This will clear V-Chip ratings table version.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
GUIDE
- This activates some, butnot all, electronicprogram guides
(EPG data) whenit is usedand transmitted bysome DTV station
providers. It isonly supported whenreceiving DTV channels.
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
GUIDE
1/3 >>
03:00 ---04:00
Q.VIEW
INFO
MUTE
Moving picture 480i 4:3
1
5
2
6
0
3
4
04:00 ---05:00
7
-
8
CC
Moving picture 480i 4:3
9
SAP
P.MODE
CH+
1. Press theGUIDE button to switchon GUIDE.
2. Press theCH+/- or VOL+/-button to selectdesired program,
then press theOK button to displaythe selected program.
3. Press theGUIDE or EXIT button again toswitch off GUIDE and
return to TV viewing.
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
FAVORITE CHANNELS LIST
TITLE/PBC
SEARCH
D.CALL
ANGLE
You can create your own Favorite List. Use the “FAV.LIST”
button on the remote control when a channel is highlighted
and then you can add or delete the channel to/from the
Favorite List.
AUDIO PROGRAM ZOOM
10+
CLR
FAVORITE CHANNELS
14.3
ATSC-3
[ENTER KEY] ADDCURRENT CH TO
FAVORITELIST
Press the FAV.LIST button open the favorite channel
list, press CH+/-button to select the channel andpress
OK button to confirm.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
QUICKLY VIEW
This function enablesquick swap tothe last watchedprogram.
1 Suppose the channelnumber you used
just now is8 and thechannel number
you are usingis 18 (asshown in thefigure).
POWER
TV/DTV
TV/AV
TV/DVD OPEN/CLOSE
Q.VIEW
INFO
MUTE
2 If you wantto return tothe last watched
program channel 8, you can simplypress
the Q.VIEW button.
1
5
2
6
0
3
4
7
-
8
CC
3 If you wantto return tochannel 18, press
the button again. Use this functionto easily
change between thechannel you are
using and thechannel you lastused.
9
SAP
P.MODE
CH+
VOL
_
MENU
VOL
+
OK
SLEEP
GUIDE
CH-
CH.LIST FAV.LIST
SIZE
SLEEP TIMER
To set the TV to turn off after a preset amount of time, press SLEEP
button repeatedly to select
SETUP PAUSE/STEP SUBTITLE
STOP
REV
PREV
FWD
NEXT
D.MENU
A-B
REPEAT
the number of minutes. First the
OFF option appears on the screen,
followed by the following sleep
SLOW
PLAY/ENTER
TITLE/PBC
SEARCH
D.CALL
ANGLE
timer options:
(5 MINUTE,10 MINUTE, 15 MINUTE,
30 MINUTE,45 MINUTE, 60 MINUTE,
90 MINUTE,120 MINUTE,
AUDIO PROGRAM ZOOM
SLEEP OFF
10+
CLR
180 MINUTE, 240MINUTE,OFF)
To confirm the sleeptimer setting,
press SLEEP and the remaining
time will be displayed for afew
seconds. To cancel thesleep timer,
Press SLEEP repeatedly until the
display turns toOFF.
PICTURE MODE
Press the P.MODE button toswitch
desired picture quality mode.
Four kinds of picture modes
(i.e., "MILD","STANDARD","VIVID" ,
"CUSTOM", ) can be selected in turn.
MILD
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Features
Basic Playback
Preparations
Stop playback
1. Press STOP
button to go to stop mode, the TV
Press the DVD/TV button on the remote control or
the TV to enter the DVD status.
screen will show the start logo. For some discs the
player can recall the location where stopped, such
as DVDs and audio CDs.
Basic playback
2. Press PLAY/ENTER to playback to resume play-
back from the location where playback is stopped
or from the beginning of the disc.
1. Press OPEN/CLOSE to open the disc tray,
place a disc in the disc tray.
3. Press STOP twice to stop completely.
There are two different disc sizes. Place the
disc in the correct GUIDE on the disc tray. If the
disc is out of the GUIDE, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc that is unplayable in this
DVD player.
Previous and Next
During Playing, pressing the PREV
keywill
restart the currentchapter and skip chapters
backwards with each subsequent press until the
start of thedisc is reached.
Each press ofNEXT key duringplaying will
skip the currentchapter and play the next one.
2. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
Some discs do not start automatically. Press
PLAY/ENTER tostart playback.
3. Some discs may start playback with a menu. Use
the cursor buttons on the remote control to select
menu options and press PLAY/ENTER to start. You
may also press the digit buttons to select a menu
option directly. Many DVDs will not allow this during
start-up.
Fast forward and Fast reverse
1. Press FWD
to fast forward through the disc.
button is pressed, the
Each time the FWD
fast forward motion speed changes.
2. Press PLAY/ENTER to resume normal playback.
Pause playback
3. Press REV
to fast reverse through the disc.
button is pressed, the
Each time the REV
1. Press PAUSE/STEP to pause playback (still mode).
The sound will be muted during still mode.
fast reverse motion speed changes.
4. Press PLAY/ENTER to resume normal playback.
2. Press PLAY/ENTER to resume normal playback.
Single step playback
1. When paused, press PAUSE/STEP continuous
to single step forward tothe next frame in the
video.
2. Press PLAY/ENTERto resume normal playback.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Features(Continued)
Advanced Playback
IMPORTANT NOTE:
All described functionsare for DVDdiscs. If youplay other formatdiscs, the operation
and on screendisplay will bedifferent.
PROGRAM
SUBTITLE
Press "SUBTITLE ", the screen will display "SUBTI-
TLE 01/XX XXXXX", "01" indicates the original
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
This function can select up to 32 languages display-
ed on screen.
When playing discs, press "PROGRAM" to enter
program mode. Press the digit buttons to select the
program number that you want. When finished move
the cursor to select "START" . This will start the
program playback.
SEARCH
REPEAT
Press "SEARCH" once to display the search
menu. Press the button again to select. Press
the program number buttons to input the item
you require. Press PLAY/ENTER to confirm.
Press " REPEAT " and Chapter repeat will be
displayed on screen, the second press will display
Title repeat, the third press will display All repeat,
the fourth press will cancel this function.
SLOW
A-B
Press SLOW to play a disc in slow forward. Each
time the SLOW button is pressed, the slow
motion speed changes.
Press " A-B " to begin start-point, press again
to set an end point and complete setting. The
selected section A-B will be repeated. The third
press will cancel this function.
Press PLAY/ENTER to resume normal playback;
Note: This function does not work for CD and MP3.
ANGLE
TITLE/PBC
When enjoying sports, concert or theatre, press this
key to watch same actions in different angles. (Valid
for discs possessing this function. Using a disc
recorded in multi-angle you can view the scene from
different angles,for example,front, side, whole view
and exterior scene).
With some DVD discs pressing this key will display
the title menu. You can then use the digit buttons
to select the item you prefer.
AUDIO
D.MENU
Press this key to change the mode of audio.
such as: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
Press this key to display root menu,select item
according to your preference. (This function will work
with a DVD having a multi-layer menu.)
Press this button to cycle between Mono Left, Mono
Right, Mix-Mono and Stereo.
Note: When press this button continuously, you must
above 3 seconds interval.
D.CALL
Pressing this key will cycle through "Title Elapsed",
"Title Remain", "Chapter Elapsed", "Chapter Remain"
and "Display off ".
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Playback Functions
JPEG DISC PLAYBACK
When a disc containing standard JPEG picture files is inserted into the player, a
navigation menu will be displayed automatically. Use theUP and DOWN cursor
buttons to select a file then press PLAY/ENTER. The slide show will commence.
Press PREVIOUS or NEXT to move between pictures. Press pause to stop on the
current picture. Press PLAY/ENTER to resume normal playing.
A JPEGdisc contains JPEG (.jpg) format picture information that can be decoded
by a micro-computer software and displayed through the video output interface or on
the television screen.
This function has many applications. For example one can save files from a scanner
or digital camera in the JPEG format, record these on a CD-R disc and present them
to an audience through this player.
The JPEG format is a convenient method to store images in a small amount of
memory space, and is ideal for archiving information.
MP3 PLAYBACK
When playing anMP3 disc, anavigation menu willbe displayed automatically. In themenu, use UP
or DOWN cursorbuttons to choosethe folder, then press PLAY/ENTER to enterthe folder. Use the
UP and DOWNcursor buttons toselect the fileand press PLAY/ENTER. Pressing theLEFT cursor
button will takeyou to theprevious screen/menu.
SCREEN SAVER FUNCTION
This unit employs a screen savermode to helpprotect the tubeduring static videopictures. This can
be turned offon the GENERALSETUP PAGE.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
DVD System Setup
General Setup Process
1.Press the SETUP button, the
General Setup Page,Preference
Page will be displayed in turn.
SETUP
..General Setup Page..
.
3:Ps
.
3:Lb
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB
4
On
4
2.Press to select, the
or
item, then press to enter the
submenu.
ENG
16
9
On
Screen Saver Off
PLAY/ENTER
or
3.Press to select then
press PLAY/ENTER to confirm.
4.Press EXIT key or press SETUP
repeatedly to exit the set-up
menus.
..Preference Page..
Parental
Password
Default
1 Kid Saf
2 G
3 Pg
4 Pg 13
5 Pgr
6 R
7 Nc17
8 Adult
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal TV,
select 4 3/LB.
..General Setup Page..
The following information applies only
when the DVD output is connected to an
external TV.
.
3:Ps
.
3:Lb
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB
4
On
4
ENG
16
9
SETUP
On
4:3/PS (PS = Pan and Scan)
Screen Saver Off
You may select if you have a normal aspect
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
4:3/LB (LB = Letter Box)
PLAY/ENTER
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16:9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
General Setup Page
..General Setup Page..
ANGLE MARK: Users can select a particular
.
camera angle when playing a DVD which offers
multiple angles.
This item allows you to set Angle Mark ON or OFF.
TV Display
Angle Mark
OSD Lang
Spdif Output
Captions
LB
On
On
Off
ENG
On
Screen Saver Off
On Screen Display (OSD) Language: Users
can select on-screen display language.
..General Setup Page..
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB
On
ENG
English
Spanish
On
Screen Saver Off
SPDlF OUTPUT MODE: Coaxial audio output modes
when connecting to external audio equipment.
..General Setup Page..
TV Display
Angle Mark
LB
On
This DVD player includes three kinds of audio output:
1. SPDlF OFF: An analog surround sound format is output
through the back-paneI connections for 2-CH audio out or
5.1 CH audio out.
2. SPDlF/RAW or SPDIF/PCM:This mode allows a coaxial
output cable to be connected to external equipment containing
various audio processors that decode various synthesized and
discrete audio information for greater effects.
OSD Lang
Spdif Output
Caption
ENG
Spdif Off
On
Spdif / Raw
Spdif / Pcm
Screen Saver Off
..General Setup Page..
CAPTIONS: This function allows you to display or
hide the caption.
TV Display
Angle Mark
LB
On
OSD Lang
Spdif Output
Captions
ENG
On
On
Off
Screen Saver Off
SCREEN SAVER: If the screen saver is on, then
there will be an animated picture of DVD on the
screen whenever the DVD player is idle for more
than 3 minutes .
..General Setup Page..
TV Display
Angle Mark
LB
On
OSD Lang
Spdif Output
Caption
ENG
On
Screen Saver Off
On
Off
39
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
Preference Page
The Preference Page is only available when there is no disc
in the player. These settings are applied consistently to all
discswhichareinsertedandplayed.
SETUP
PARENTAL: The parental
control function works in
..Preference Page..
1 Kid Saf
2 G
3 Pg
4 Pg 13
5 Pgr
6 R
7 Nc17
8 Adult
Parental
conjunction with the
different censorship classes
assigned to DVDs. These
classes help to control the
Password
Default
PLAY/ENTER
types of DVDs that the family
watches. There are up to 8
censorship classes for DVDs.
Note:
1 To change this setting you must enter your password.
(Initial password is 0000)
2 When set to OFF, all discs may be viewed.
PASSWORD CHANGE:
You can change your password by
entering 4 digits. You must confirm
the 4 digits before the new password
can be accepted.
SETUP
..Preference Page..
Parental
Password
Default
Change
PLAY/ENTER
Old Password
New Password
Confirm PWD
NOTE:If you forgetyour password
or a password is accidentally set
enter 2881 as the password. This
will enable you to regain control.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
DEFAULT: Resets all settings
SETUP
..Preference Page..
(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press ENTER
to perform the reset.
Parental
Password
Default
Reset
PLAY/ENTER
Note:
Some functions may not be available depending on the type of disc.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
The following discs can be played:
You cannot play discs other than those listed above.
You cannot play non-standardized discs, even if they may be labelled as above.
The performance of CD-R or CD-RW disc depends on the way the disc was burned. In a few cases,
their performance may not be consistant or may not even operate at all.
This DVD Playeris designed andmanufactured according tothe Region Management
Information that isrecorded on aDVD disc. Ifthe Region numberdescribed on theDVD disc
does not correspondto the Regionnumber of thisDVD Player, this DVD playerwill not play
that disc.
This Region numberof this DVDPlayer is .
1
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Protection and DVD Characteristics
Compare DVD disc with other discs:
DVD
LD
SVCD
VCD
CD
Digital/
MPEG I
Encode
method
Digital/MPEG
Digital
Digital
Analog
Single- Double Single- Double-
side
-side
side
side
650MB
650MB
650MB
Capacity
single- single double- double-
layer
4.7G
-layer layer
layer
17G
8.5G
9.4G
Single-side
60 minutes
double-side
120 minutes
133
242
266
484
minutes minutes minutes minutes
45 minutes 74 minutes 74 minutes
Playing Time
Disc diameter
12cm/8cm
30cm/20cm
12cm
12cm
12cm/8cm
No more than
430 line
Horizontal
resolution
No more than No more than
More than 500 line
350 line
250 line
Picture
proportion
One kind
One kind
Multiple kinds
32 kinds
One kind
16 kinds
at most
Subtitle
4 kinds
4 kinds
at most
4 kinds
at most
Language
2 kinds
2 kinds
8 kinds
48KHz, 96KHz/
6, 20, 24bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
Sound quality
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
CHECKING
PICTURE
SOUND
The aerial direction and connection
Picture with snow
Noise
This is called "ghosting" and can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Double or Triple Image
Normal
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Noise
Disturb
Volume Sound mute
Normal
No Picture
No color
No sound
Ensure that the power supply is connected to
the TV setand turned on. Also ensure that the
TV set is not in "Listen Mode" or that the
brightness and contrast are not turned down.
No sound
Adjust color control
Adjust channel again
Normal volume
Normal or Weak Volume
Scramble
Color Purity isa fault thatcan be causedby moving the
TV set, placingmagnets near theTV screen orturning
on/off house holdappliances such asvacuum cleaners
near the TVset. Turnthe TV off with themain power
switch for 15minutes. When thepower is turnedon
again the TVset will automaticallydegauss the picture.
In severe casesleave the TVset turned offover night.
Color Spot
Normal volume
Note:
1.If the fault can not be corrected using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as TV set has dangerous voltages inside that may cause a fatality or fire.
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
The specifications offered you here are for reference only. With product improvement
there may be some differences between the description and the final product.
HCR20
TCF20
HCR13
ATSC
13
20
75
85
90
HCR13
HCR20
368 mm x 378mm x 371mm
503 mm x 472 mm x 500mm
503 mm x 472 mm x 500mm
HCF20
NOTE
Design and specifications are subject to change without notice.
Dimensions quoted in this manual are approximate.
The registered logos shown in this manual, such as those on the page showing playable discs
contents, are those of the license holders and the associated trademarks holders. They are
shown for informational purposes only and do not indicate content or capability in all software,
nor with all hardware.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Responsibility of Haierto the purchaserwith
respect to theproduct, and shall
This Haier brandproduct, when shippedin
its original packaging, will be freefrom
defective workmanship andmaterials, and
agrees that itwill, at itsoption, either repair
the defect orreplace the defectiveproduct
with a newor re-manufactured equivalentat
no charge tothe purchaser, for parts or
labor for theperiods set forthbelow:
constitute full satisfactionof all claims,
whether based oncontract, negligence, strict
duality or otherwise. In no eventshall Haier
be liable, orin any wayresponsible for any
damages or defectsin the productwhich
were caused byrepairs or attemptedrepairs
performed by anyoneother than an
authorized service centeror dealer; norshall
Haier be liable, or in anyway responsible
for incidental orconsequential economic or
property damage. Somestates do notallow
the exclusion ofincidental or consequential
damages, so thatabove exclusion maynot
apply to you.
This warranty doesnot apply tothe
appearance of theproduct or theexterior of
the product, whichhas been damagedor
defaced, altered ormodified in designor
construction. It doesnot apply tothe
additional excluded itemsset forth below:
The warranty commenceson the datethe
item was purchasedand the original
purchase receipt mustbe presented tothe
authorized service centerbefore warranty
repairs are rendered.
THIS WARRANTYGIVES YOU
SPECIFIC LEGAL RIGHTS. YOU MAY
ALSO HAVE OTHER RIGHTSWHICH
VARY FROM STATE TO STATE.
Warranty period for this product: 90 day labor
and one yearparts.
The limited warrantydescribed herein isin
addition to whateverimplied warranties may
be granted topurchasers by law. ALL
IMPLIED WARRANTIES INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR USEARE LIMITEDTO THE
PERIOD(s) FROM THE DATE OF PURCHASE
SET FORTH BELOW. Somestates do not
allow limitations onhow long animplied
warranty lasts, sothe above limitationmay
not apply toyou.
Additional items excludedfrom warranty
coverage: non-rechargeable batteries.
Where to obtainservice: For thelocation of
the nearest Haierauthorized service centeror
to obtain productliterature, accessories,
supplies or customerassistance,
please call 1-877-337-3639.
What to doto obtain service:ship or carryin
your product toan authorized servicedealer
or center .Besure to haveproof of purchase.
If you shipthe product, besure it is
packaged carefully.
Haier America
New York, NY 10018
Neither the salespersonnel of theseller nor
any other personis authorized tomake any
warranties other thanthose described herein,
or to extendthe duration ofany warranties
beyond the timeperiod described hereinon
behalf of Haier.
The warranties describedherein shall bethe
sole and exclusivewarranties granted by
Haier and shallbe the soleand exclusive
remedy available tothe purchaser. Correction
of defects inthe manner andfor the period
of time describedherein, shall constitute
complete fulfillment ofall abilities and
46
Download from Www.Somanuals.com. All Manuals Search And Download.
0090500177
Ver.1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|