COMBINED 21" TV AND DVD PLAYER
OWNER'S MANUAL
TV
+
The Owner's Manual for the Follow Models:
Please read this manual carefully
before using this TV set and keep it
for future reference.
DTA-2198, DTA-2198PF
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and cautions
1. When you clean the TV set, please 4. Do not place the TV set near rain or
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
moisture as it may cause an electric
shock, or the TV set to catch fire. The
TVsetmustonly
beusedindryin
door locations.
2. In order to prolong the using life of
the TV set, please place it in a well
ventilatedlocation.
5. The back cover must only be
removed by a registered electrical
service person. Removing the back
cover may result in electric shock, fire
or damage to
the TV set.
6. If the TV set is not going to be used
for a long time, or there is a severe
thunder & Lighting storm, it is
recommended that the TV set be
disconnected from the AC power outlet
and the aerial plug removed.
3. Don't place the TV
set in direct sunlight
ornearaheatsource.
Explanation on the display tube
Should the picture tube require cleaning, disconnect the power and use a dry
soft cotton cloth. Do not use any cleaner or abrasive cloths.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Aerial connection
For an optimum high quality picture, it is strongly advised that the TV set connect to an
external aerial(s) using high quality coax cable. When connecting to HiFi VCRs, satellite
(or cable) set top boxes, that the AV terminals are used to allow the stereo sound to be
transferred.
300 twin-lead cable
Antenna adapter
(additional purchase)
Mixer
additional
purchase
75 coaxial cable
Antenna input
75 standard
Plug
(additional purchase)
AC power socket
coaxial type
Preparation of the remote control unit
Battery installation
Take off the battery compartment cover. Place two AAbatteries, make sure that battery
polarity matches with the +/- mark inside the battery compartment.
Operation notes for the remote control unit
Under normal conditions, the life time of batteries is one year.
If you don't intend to use the unit for a long period or the electricity of the batteries is
used up, remove the batteries to prevent batteries acid from leaking into the battery
compartment.
Never place batteries in a fire.
Avoid dropping the remote control and/or getting it wet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Function buttons and external sockets
Front panel of the TV set
VIDEO L-AUDIO-R
Video R/LAudio
Headphone jack
Power Switch
Play the DVD
Power Indicator
TV/DVD MENU
V-
V+
P-
P+
Stop the DVD
Open/close the DVD
Channel Position up/down
The DVD Player
Menu
TV/DVD Switching
Signal Receiver
Volume up/ down
Rear panel of the TV set
TV EXT
TV EXT
TV SCART Terminal
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons on the remote control
Buttons on the remote control
Stand By
DVD Open/close
(Not available)
Scan
POWER CALENDAR TIME OPEN/CLOSE
SCAN
SWAP
CALL
MUTE
Time Menu
Mute
Former Program
Call Screen Display
Program Number
(Not available)
TV/AV Exchange
Digital Selector
TV/DVD
1
5
9
2
6
0
3
7
4
8
TV/AV
-/--
TV/DVD
P+
Volume/Channel Selection
MENU
MENU
V-
V+
Exit Screen Display
Picture Mode
EXIT
P.STD
P-
DVD STOP
STOP
REV
PAUSE/STEP
SETUP
(Not available)
DVD SETUP
FWD
PREV
NEXT
DVD PAUSE/STEP
DVD FAST REVERSE
DVD FAST FORWARD
DVD MENU
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
DVD NEXT
DVD PREVIOUS
DVD REPEAT
DVD PLAY/ENTER
DVD A-B REPEAT
DVD Cursor Move button
TITLE/PBC SEARCH
ANGLE
AUDIO PROGRAM ZOOM
D.CALL
H.LOCK
UP
SUBTITLE
10+
LEFT
RIGHT
DVD SLOW
DVD ANGLE
DVD SEARCH
DVD Audio
DOWN
DVD TITLE
DVD PROGRAM
DVD CALL
DVD SUBTITLE
Zoom
DVD 10+
(Not available)
(Not available)
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on/ off the TV set
In the following, the methods of using power switch and remote controller to switch
on/off power supply for the TV set will be explained.
Switching on/ off the TV set
Switching on/ off the TV set
1 Please press the power switch to switch on AC
power supply and the power indicator will light.
2 If the indicator is lighting in red, press the button
on the remote control again.
Note
1 When you don't operate the TV set with a
remote control, you can turn on it directly
through pressing the P+/- buttons on the TV set
(Child Lock must be turned off).
4
AUTO
DK
POWER
2 If you want to exchange to standby status,
please press down the POWER button on the
remote control.
3 If you want to fully switch off the power supply
for the TV set, please press the power switch
button on the TV set.
Auto switch-off function
When the "Back" function is on, if an empty
channel is selected or the TV programs are
ended for the day, the power will be switched off 5
minutes later automatically. If the "OFF TIME" is
on, it will be switched off according to the
presetting time. The auto power off function does
not work under video input or when the
background is off.
(Note: If the "off timer" is less than 5 minutes, it
will be switched off automatically to the preset
Time. )
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
You can watch TV program in a preset channel.
Watching TV program
How to select TV program
Select the desired program
1 Using "Program number" buttons
Directly enter thechannel number withthe numeric keypad
on the remotecontrol.
To select channel numbersfrom 10 ~99 press [-/--]button
and enter thetwo digit channelnumber
To select channel numbersfrom 100 ~218 press [-/--]button
twice and enterthe 3 digitchannel number
1
5
9
2
6
0
3
7
4
8
2 Using the P+/- buttons
Press the P+ button to select a channel number in number
increasing direction.
Press the P- button to select a channel number in number
decreasing direction.
Select the desired sound
Press the V-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~99. When
the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
P+
MENU
V-
V+
P-
If the colour or sound of a channel is abnormal
Usually this shouldbe set inthe
Auto position. Howeverif the
colours displayed onthe screen
TUNE
are incorrect youcan manually
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
select the correctcolour system.
When finish rememberto turn it
back to autoagain so thatother
programs will stillwork correctly.
To select the colourchange
option press theMENU button
on the remotecontrol.
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
P+
If picture colour is abnormal
Use the P+/- buttons to select Colour then the
V-/+ buttons to change between Auto, PAL, NTSC,
SECAM and NTSC443. Press the EXIT button to save
MENU
V-
V+
P-
the setting.
If the picture sound is abnormal
Use the P+/- buttons to select Sound then press the
V-/+ buttons to select the sound system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV continued
Swapfunctionenablesquickswaptothelastwatchedprogram.
Auto scan function enables automatic successive scanning of all the programs in
memorywith "OFF"skipstatus(eachchannelwilllastabout2seconds).
Program swap and auto scan functions
Program swap
1 Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
18
AUTO
DK
8
AUTO
DK
2 If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
SWAP
18
AUTO
DK
3 If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
Auto program scan
1 If you want to select a desirable program, you may scan all
the TV programs in memory. You can simply press the
SCAN button to do this. The program numbers will appear
one after another from beginning to end (each channel
number will last about 2 seconds).
SCAN
2 If you want to stop the function during auto scanning, simply
presstheSCAN button again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
This TV set has three methods to set the channels, which are respectively full
automatic, semi automatic and manual fine tune.
-
In this section, how to use the remote control to set the channel is explained. You
can also use the buttons on the TV set to set channel.
Full automatic mode
1 Press the MENU menu button ,
till the TUNE menu shown on
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
the right display on the screen.
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
P+
MENU
V-
V+
2 Press the P+/- buttons to
select "AUTO SEARCH".
P-
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
3 Press the V+ button to
P+
ensure automatic search
function operates. All channels
now playing program will be
automatically preset in order .
After the search has finished,
the first program number will
display on the screen.
MENU
V-
V+
P-
Display function
CALL
Press the CALL button, then
the channel number and the
systems will be displayed on
the screen.
4
AUTO
DK
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Semi-automatic search
Semi-automatic search
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
buttons to choose desired
channels I.E. channel 1
1
AUTO
DK
P+
2 Press the TUNE menu button ,
till the TUNE menu shown on
the right display on the screen.
MENU
V-
V+
P-
3 Press the P+/- buttons to
select " SEARCH".
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
P+
MENU
V-
V+
4 Press the V-/+ buttons to
1
start searching.
P-
The V- down button is used
for lower side program search.
The V+ up button is used for
higher side program search.
Repeat this step, till find the
desired channel.
To turn off the on-screen menu
In general, after you press the MENU button, the menu item
display (PICTURE, TIME, FUNCTION, TUNE, EXCHANGE,
ETC.) will automatically disappear within 15 seconds. If you
want to eliminate these contents immediately, please press
the EXIT button.
EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Manual fine tune
Manual fine tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless
reception is poor.
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels I.E. channel 1
1
AUTO
DK
P+
MENU
V-
V+
P-
2 Press the MENU menu button ,
till the TUNE menu shown on
the right display on the screen.
3 Press the P+/- buttons to
select " FINE TUNE".
TUNE
COLOUR
SOUND
BAND
AUTO
VHFL
OFF
0
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
P+
4 Press the V-/+ buttons all
through to carry out fine tune,
till the best picture and sound
are obtained.
MENU
V-
V+
1
P-
FINE TUNE
152.25MHz
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Program skip
Program skip
The Program skip feature enables you to skip/hide
programs that you do not wish to be displayed when
using the P+/- buttons. These channels will still be
displayed by directly using the channel number
buttons on the remote control.
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels I.E. channel 1
1
AUTO
DK
P+
MENU
V-
V+
2 Press the MENU menu button ,
till the TUNE menu shown on
the right display on the screen.
P-
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
3 Press the P+/- buttons to
select "SKIP".
SKIP
P+
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
MENU
V-
V+
4 Press the V-/+ buttons to
turn the SKIP function "ON".
P-
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
ON
5 Press the TUNE button to close
the menu. When you use the P+/-
buttons to select channel, this
channel will be skipped. However,
you can still use the PROGRAM
NUMBER buttons to select the
skipped channel numbers.
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
0
P+
If you want to recover the skipped channel
MENU
V-
V+
1 Use the PROGRAM NUMBER buttons to select the channel
number to be recovered.
2 Repeat those steps just now.
3 Press the V-/+ buttons to turn the SKIP function "OFF".
P-
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Multiple picture modes
How to select picture modes
You can quickly select the desired picture mode from
four preset modes and one customized mode.
STANDARD
P.STD
Press the P.STD button to select the
RICH
desired picture quality. Five kinds
of picture modes (i.e., "STANDARD",
USER
"RICH", "USER","LISTEN",
LISTEN
"SOFT" ) can be selected in turn.
SOFT
The 5 modes are
Listen-This is a new feature that blacks out the TV
screen when listening to music only channels;
Soft-Designed for night time low light viewing;
Standard -Designed for rooms that have good all round
lighting;
Rich-Designed for rooms with high ambient lighting such
as daytime sport;
User-A spare setting that can be adjusted to personal
tastes.
How to customize your own picture status
1 Press the MENU menu button , till the PICTURE menu
shown on the right display on the screen.
P+
MENU
V-
V+
2 Press the P+/- buttons to
PICTURE
select the item to adjusted,
then press the V-/+ buttons
to obtain the desired effect.
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
*HUE
48
32
48
40
60
P-
BLACK STRETCH OFF
I T E M
Press V-
Press V+
Strong
Weak
CONTRAST
BRIGHTNESS
COLUOR
P+
Bright
Dark
MENU
V-
V+
Deep
Shallow
Soft
Sharp
SHARPNESS
P-
lean to green
lean to purple
*Hue
Note:
The "Hue" item only appears when the colour system is NTSC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Continued
Black Stretch-(Automatically Increases the Contrast Rage)
Noise Reduce - (Picture Noise & Grain Reduction Circuit. Only use on poor reception.)
Black stretch and noise reduce
How to select BLACK STRETCH
1 Press the MENU menu button ,
till the PICTURE menu shown on
PICTURE
the right display on the screen.
CONTRAST
BRIGHTNESS
COLOUR
48
32
48
40
60
P+
SHARPNESS
*HUE
MENU
V-
V+
BLACK STRETCH OFF
2 Press the P+/- button to
select "BLACK STRETCH".
P-
PICTURE
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
*HUE
48
32
48
40
60
3 Press the V-/+ buttons to
turn the BLACK STRETCH
function "ON" or "OFF".
BLACK STRETCH ON
How to select NOISE REDUCE
1 Press the MENU menu button,
till the FUNCTION menu shown
FUNCTION
on the right display on the screen.
ENGLISH
P+
BACKGROUND
ON
ON
ON
ON
MENU
V-
V+
NOISE REDUCE
FADE
AVL
P-
CALENDAR
2 Press the P+/- buttons to
select "NOISE REDUCE".
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
AVL
CALENDAR
ON
ON
ON
ON
3 Press the V-/+ buttons to
turn the NOISE REDUCE
function "ON" or "OFF".
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Continued
Mute function
Sound mute
1 Press the MUTE button on the
remote control and "MUTE" type
MUTE
face will display on the lower part
of the screen. At this time, the
sound of the TV set is turned off.
MUTE
2 If you want to recover the sound,
press the MUTE button again or
directly press the V-/+ buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
Time functions
Clock setting and timer on/off functions
Clock setting
The clock will only work if the TV set if left turned on
or in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the front panel, the clock losespower and willneed to
be reset when the power is reconnected.
TIME
1 Press the TIME menu button,
and the TIME menu display on
the screen.
TIME
CLOCK
17:18
18:00
1
--:--
0
2Press the P+/- buttons select
"CLOCK", then press the V -/+
buttons to adjust the time in
hour position; press again the
P+/- buttons to select the time
in minute position, then press
the V-/ +buttons to adjust the
value of minutes .
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
P+
MENU
V-
V+
--:--
1
P-
On/off timer
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
TIME
1 Press the TIME menu button
to call up the TIME menu on the
screen.
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
1
--:--
0
2 Press the P+/- buttons to
select "ON TIME", then press
the V -/+ buttons to set the
value in hour position; press
again the P+/- buttons to select
the minute position and set the
value of the minute.(take 18:00
as an example)
--:--
1
P+
MENU
V-
V+
3 Press the P+/- buttons to
select "ON PROG", then press
the V-/+ or program direct
number buttons to select your
desired channel (take 8 as an
example).
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
P-
17:18
18:00
8
23:00
0
--:--
1
4 Repeat step 1-2 to set OFF
TIME.(take 23:00 as an example)
Download from Www.Somanuals.com. All Manuals Search And Download.
Time functions
Continued
Sleep timer and program preset
Sleep timer
The TV set have 18 sections
0
option for sleep timer function
(each section has a time
interval of 10 minutes) (See right
chart):
10
20
TIME
170
180
1 Press the TIME menu button,
and the TIME menu display on
the screen.
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
2 Press the P+/- buttons to
select "SLEEP TIMER".
17:18
18:00
8
23:00
120
--:--
1
P+
3 Press the V-/+ buttons to
MENU
SLEEP TIMER
V-
V+
adjust the SLEEP TIMER level. REMIND TIME
REMIND PROG
P-
REMIND PROG function
Program remind timer, that displaysan on-screen reminder
prompt, when aprogram on adifferent channel is due tostart.
TIME
1 Press the TIME menu button
to call up the TIME menu on the
screen.
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
120
2 Press the P+/- buttons to
select "REMIND TIME", then
press the V -/+ buttons to set
the value in hour position;
press again the P+/- buttons to
select the minute position, and
then set the value of the
minute.(take 19:00 as an
example)
19:00
1
P+
MENU
V-
V+
3 Press the P+/- buttons to
select "REMIND PROG", then
press the V-/+ buttons or the
program direct number buttons
to set the desired channel
(take 18 as an example).
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
120
P-
19:00
18
NOTE: For REMIND PROG to
operate CHILD LOCK must be
turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up function
Screen saver and childlock functions
How to start screen saver function
When the BACKGROUD function
is ON, the screen will turn
automatically as shown "NO
SIGNAL" of moving ( black
background).
NO SIGNAL
1 Press the MENU menu button
,
till the FUNCTION menu shown
on the right display on the screen.
P+
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
2 Press the P+/- buttons to
ON
ON
ON
ON
MENU
V-
V+
select "BACKGROUND" and press
the V-/+ buttons to turn the
AVL
CALENDAR
P-
BACKGROUND function "ON" .
P+
MENU
V-
V+
P-
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up function
Continued
AVL and calendar functions
AVL function
Automatic Volume Limit control reduces effect of large
volume changes such as when the ads come on.
1 Press the MENU menu
button till the FUNCTION menu
,
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
shown on the right display
on the screen.
ON
ON
ON
ON
P+
AVL
CALENDAR
MENU
V-
V+
2 Press the P+/- button to select
"AVL" .
P-
FUNCTION
ENGLISH
3 Press V-/+ button to turn the
BACKGROUND
NOISE REDUCE
FADE
AVL
CALENDAR
ON
ON
ON
ON
AVL function "ON" or "OFF"
.
Calendar function
Enables the TV sets internalcalendar to beset.
1 Press the MENU menu
button till the FUNCTION menu
,
shown on the right display on the
screen.
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
ON
ON
ON
ON
2 Press the P+/- button to select
"CALENDAR" , then press the
V-/+ buttons to the CALENDAR
display on the screen.
AVL
CALENDAR
P+
MENU
V-
V+
P-
3 Press the P+/- buttons to turn
the YEAR/MONTH/DAY, press
V-/+ buttons to set or adjust
the YEAR/MONTH/DAY.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up function
Continued
Fade
Fade
The FADE control allows time for the picture tube to
warm up and gently turned on, which can help prolong
the life of the picture tube.
1 Press the MENU menu button
till the FUNCTION menu shown
on the right display on the
screen.
,
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
ON
ON
ON
ON
P+
AVL
CALENDAR
MENU
V-
V+
P-
2 Press the P+/- buttons to
select "FADE .
FUNCTION
ENGLISH
BACKGROUND
NOISE REDUCE
FADE
3 Press the V-/+ button to turn
ON
ON
ON
ON
the FADE function "ON" or "OFF"
.
AVL
CALENDAR
Download from Www.Somanuals.com. All Manuals Search And Download.
Position exchange functions
Exchange
Exchange
This feature enables TV programs that may be on a wrong TV
channel number to be swapped/exchanged. This feature is
very useful when Automatic Search Tuning has been used, to
reallocate the found programs to the correct channel numbers.
P+
1 Press the MENU button again
(6 times) till the EXCHANGE
,
menu display on the screen.
MENU
V-
V+
EXCHANGE
PROGRAM 1
PROGRAM 2
EXCHANGE
6
2
P-
2 Press the V-/+ buttons or the
PROGRAM NUMBER 0-9
buttons to set PROGRAM 1 TO 6.
P+
3 Press the P-/+ buttons to
select " PROGRAM 2".
MENU
V-
V+
4 Press the V-/+ buttons or
P-
the PROGRAM NUMBER 0-9
buttons to set PROGRAM 2 TO 9.
EXCHANGE
PROGRAM 1
PROGRAM 2
EXCHANGE
6
9
5 Press the P+/- buttons to
select "EXCHANGE".
P+
MENU
V-
V+
6 Press the V-/+ buttons to set
"EXCHANGE".
P-
EXCHANGE
PROGRAM 1
PROGRAM 2
EXCHANGE
6
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
Basic Playback
Preparations
Stop playback
Press the TV/ DVD button on the remote control
1. Press STOP
button to go to stop mode, the TV
or the TV to turn on the DVD player.
screen will show the start logo. For some discs the
player can recall the location where stopped, such
as DVDs and audio CDs.
Basic playback
2. Press PLAY/ENTER to resume play-back from the
location where playback was stopped.
3. Press STOP twice to stop completely.
Play must thenresume from thetitle beginning.
1. Press OPEN/CLOSE to open the disc tray,
place a disc on the disc tray.
There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player (see "Playable discs").
Previous and Next
During Playing, pressing the PREV
keywill
restart the currentchapter and skip chapters
backwards with each subsequent press until the
start of thedisc is reached.
Each press ofNEXT
skip the currentchapter and play the next one.
2. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
key duringplaying will
Some discs do not start automatically. Press
PLAY/ENTER tostart playback.
In the caseof CD audio and photo discsthe next
track, song orphoto is selected.
3. Some discs may start playback with a menu. Use
the cursor buttons on the remote control to select
menu options and press PLAY/ENTER to start. You
may also press the digit buttons to select a menu
option directly. Many DVDs will not allow this during
start-up.
Fast forward and Fast reverse
1. Press FWD
to fast forward through the disc.
button is pressed, the
Each time the FWD
fast forward motion speed changes.
2. Press PLAY/ENTER to resume normal playback.
Pause playback
3. Press REV
to fast reverse through the disc.
button is pressed, the
Each time the REV
1. Press PAUSE/STEP to pause playback (still mode).
The sound will be muted during still mode.
fast reverse motion speed changes.
4. Press PLAY/ENTER to resume normal playback.
2. Press PLAY/ENTER to resume normal playback.
Single step playback
1. When paused, press PAUSE/STEP repeatedly
to single step forward frame by frame in the video.
2. Press PLAY/ENTER to resume normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Advanced Playback
IMPORTANT NOTE:
ALL DESCRIBED FUNCTIONS ARE FOR DVD DISCS. There will be some differences for other kinds of disc.
PROGRAM
SUBTITLE
When playing discs, press "PROGRAM" to enter
program mode. Starting with program number "01"
highlighted, press the digit buttons to select the title
and chapter number that you want. When finished
move the cursor to select "START" . This will start
the program playback.
Press " SUBTITLE ", the screen will display "SUBTI-
TLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
This function can select up to 32 languages display-
ed on screen.
SEARCH
REPEAT
Press " SEARCH " once to display Disc Go To --:--,
use numeric key to enter the desired time of Disc.
Press " SEARCH " twice to display Track Go To --:--,
use numeric keys to enter the desired time of track.
Press " SEARCH " 3 times to display Select Track
--/03, use numeric keys to enter the desired track.
Press " REPEAT " and Chapter repeat will be
displayed on screen, the second press will display
Title repeat, the third press will display All repeat,
the fourth press will cancel this function.
SLOW
A-B
Press SLOW to play a disc in slow forward. Each
time the SLOW button is pressed, the slow
motion speed changes.
Press A-B to select the Start point. Press
again to select the End point. A third press
will cancel the function.
Press PLAY/ENTER to resume normal playback;
Note: This function is invalid for CD.
ANGLE
TITLE/PBC
When enjoying sports, concert or theatre, press this
key to watch same actions in different angles. (Valid
for discs possessing this function) Using a disc
recorded in multi-angle you can view the scene from
different angles, for example, front, side, whole view
and exterior scene.
With some DVD discs pressing this key will display
the title menu. You can then use the digit buttons
to select the item you prefer.
AUDIO
D.MENU
Press this key can change the audio mode.
such as: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
Press this key to display root menu,select item
according to your preference. (This function will work
with a DVD having a multi-layer menu.)
For CD audio, press this button to cycle between
Mono Left, Mono Right, Mix-Mono and Stereo.
Note: When press this button continuously, you must
above 3 seconds interval.
D.CALL
Pressing this key will cycle through "title elapsed",
"title remain", "chapter elapsed", "chapter remain"
and "display off ". Each displays the appropriate
time information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Function Playback
JPEG DISC PLAYBACK
When a disc containing standard JPEG picture files is inserted into the player, a
navigation menu will be displayed automatically. Use the UP and DOWN cursor
buttons to select a file then press PLAY/ENTER. The slide show will commence.
Press PREVIOUS orNEXT to move between pictures. Press pause to stop on the
current picture. Press PLAY/ENTER to resume normal playing.
JPEG disc contains with JPG-format picture information which can be decoded by micro-
computer software and output through video output interface for enjoying on TV screen.
Such function can be used in many domains. For example, in education, teachers can
change those pictures for class into JPG-format file by digital camera or scanner, which is
commonly used in computer, and record them into CD-R disc through disc recorder. It
will be convenient for and direct to the students when teachers play the disc by TV set
or other equipment in class. That reduces teachers' repetition work and good for
reservation (information in disc can be reserved for more than 100 years); in family, users
can record pictures which formed by digital camera or scanner into CD-R disc. Suppose
one picture occupies about 100K bytes, then one disc may record about 6000 pictures;
in commerce, manufacturers can show the products pictures one by one to consumers.
NOTE: The actual content will be different as per disc.
SCREEN SAVER FUNCTION
This unit employs a screen saver mode to help protect the tube during static video
pictures. This can be turned off on the GENERAL SETUP PAGE (see Pg. 26)
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
DVD System Setup
General Setup Process
1.Press the SETUP button, the
General Setup Page,Preference
Page will be displayed in turn.
SETUP
..General Setup Page..
.
3:Ps
.
3:Lb
TV Display
Angle Mark
Osd Lang
Caption
LB
On
4
4
ENG
On
16
9
2.Press to select the
or
item,then press to enter the
submenu.
Screen Saver Off
..Preference Page..
or
3.Press to setup,then
press PLAY/ENTER to confirm.
PAL
AUTO
NTSC
TV Type Auto
Parental
PLAY/ENTER
Password
Default
4.Press SETUP button to exit
the menu.
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal TV,
select 4 3/LB.
..General Setup Page..
The following information applies only
when the DVD output is connected to an
external TV.
.
3:Ps
.
3:Lb
TV Display
Angle Mark
Osd Lang
Caption
LB
On
4
4
ENG
On
16
9
Screen Saver Off
4
3/PS (PS = Pan and Scan)
SETUP
You may select if you have a normal aspect
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
4
3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
PLAY/ENTER
16
9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
General Setup Page
ANGLE MARK: Users can select a particular
.
camera angle when playing a DVD which offers
multiple angles.
This item allows you to set Angle Mark ON or OFF.
..General Setup Page..
TV Display
Angle Mark
Osd Lang
Captions
LB
On
On
Off
ENG
On
Screen Saver Off
On Screen Display (OSD) Language: The
TV on-screen display language is English.
..General Setup Page..
TV Display
Angle Mark
LB
On
Osd Lang
Captions
ENG
On
On
Off
Screen Saver Off
CAPTIONS: This functionallows you to display or hide the caption.
..General Setup Page..
TV Display LB
Angle Mark On
Osd Lang
Captions
ENG
On
On
Off
Screen Saver Off
SCREEN SAVER: If the screen saver is on,then there
will be an animated picture of DVD on the screen
whenever the DVD player is idle for more than 3
minutes .
..General Setup Page..
TV Display
Angle Mark
LB
On
Osd Lang
Caption
ENG
On
Screen Saver Off
On
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
Preference Page
The Preference Page is only available when there is no disc
in the player. These settings are applied consistently to all
discswhichareinsertedandplayed.
..Preference Page..
TV TYPE: This player
supports different TV output,
including MULTI(Auto),
NTSC, and PAL systems.
Usually please set to MULTI.
PAL
AUTO
NTSC
TV Type Auto
Parental
Password
Default
SETUP
PARENTAL: The parental
control function works in
conjunction with the
different censorship classes
assigned to DVDs. These
classes help to control the
types of DVDs that the family
watches, There are up to 8
censorship classes for DVDs.
..Preference Page..
TV Type Auto
Parental
1 Kid Saf
2 G
3 Pg
Password
Default
PLAY/ENTER
4 Pg 13
5 Pgr
6 R
7 Nc17
8 Adult
Note:
1 To change this setting you must enter your password.
(Initial password is 1234)
2 When set to OFF, all discs may be viewed.
PASSWORD CHANGE:
You can change your password
..Preference Page..
by entering 4 digits. Your must
confirm the 4 digits before the
new password can be accepted.
TV Type Auto
Parental
Password
Default
Change
Old Password
New Password
Confirm PWD
NOTE:If you forgetyour password
or a password is accidentally set
enter 1369 as the password. This
will enable you to regain control.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
DEFAULT: Resets all settings
(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press ENTER
to perform the reset.
..Preference Page..
SETUP
TV Type Auto
Parental
Password
Default
Reset
PLAY/ENTER
Note:
Some functions may not be available depending on the type of disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
The following discs can be played:
SVCD
VIDEO-CD
(VCD)
You cannot play discs other than those listed above.
You cannot play discs of non-standardized discs, even if they may be labelled as above.
The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few cases,
their performance may be not very well or even no performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Protection and DVD Characteristics
Compare DVD disc with other discs:
DVD
LD
SVCD
VCD
CD
Digital/
MPEG I
Encode
method
Digital/MPEG
Digital
Digital
Analog
Single- Double Single- Double-
side
-side
side
side
650MB
650MB
650MB
Capacity
single- single double- double-
layer
4.7G
-layer layer
layer
17G
8.5G
9.4G
Single-side
60 minutes
double-side
120 minutes
133
minutes minutes minutes minutes
242
266
484
45 minutes 74 minutes 74 minutes
Playing Time
Disc diameter
12cm/8cm
30cm/20cm
12cm
12cm
12cm/8cm
No more than
430 line
Horizontal
resolution
No more than No more than
More than 500 line
350 line
250 line
Picture
proportion
One kind
One kind
Multiple kinds
32 kinds
One kind
16 kinds
at most
Subtitle
4 kinds
4 kinds
at most
4 kinds
at most
Language
2 kinds
2 kinds
8 kinds
48KHz, 96KHz/
6, 20, 24bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
Sound quality
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the TV set to the other video and audio equipment
Connecting to the other video and audio equipment
You can connect a stereo to theAUDIO output terminals on the TV set to enjoy sounds of
higher quality. VIDEO andAUDIO output terminals output the video and audio signals being
monitoredbytheTVset. Theelectriclevelsofvideoandaudiooutputsignalsarefixed.
TV EXT
To TV EXT
To TV EXT
To outside input
To video/audio input
DVD, VCD and other reproducing equipment
Stereo
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
CHECKING
PICTURE
SOUND
The aerial direction and connection
Picture with snow
Double or Triple Image
Disturb
Noise
This is called ghosting which can be minimized
with an outside aerial, and good quality cable
and terminations. Altering the aerial direction
can also minimize this effect.
Normal
Noise
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
1. Volume Sound mute.
2. Only 1 speaker has no sound. Press S.STD button to
choose USER mode, then check wether the BALANCE
item value in SOUND menu equal to 0. Adjust the
BALANCE item in SOUND menu as you wish in USER
mode.
No sound or 1
speaker no sound
Normal
Ensure that the power supply is connected to the TV
set and turned on. Also ensure that the TV set isnot
in "Listen Mode" or that the brightness and contrast
are not turned down.
No sound
No Picture
Adjust colour control
Adjust channel again
Normal volume
Normal or Weak Volume
No colour
Scramble
Colour Purity faultwhich can becaused by movingthe
TV set, placingmagnets near theTV screen orturning
on/off house holdappliances such asvacuum cleaners
near the TVset. Turnthe TV off with themains power
switch for 15minutes. When thepower is turnon again
the TV setwill automatically degaussthe picture. In
server cases leavethe TV setturned off overnight.
Colour Spot
Normal volume
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
The specifications offered you here are only for reference and, with the improvement
of the products ,there may be some different between the description and the practicality.
Specifications
Colour system
Sound system
Picture tube
PAL,SECAM, AV NTSC
BG,DK
21"colour picture tube (51cm viewable)
2X2W 10% THD
Sound output power
Power requirements
Power consumption
Dimension
AC 110V-250V
80W
50Hz
504 Width x482 Depth x512 Height
mm
Remote control
Owner's manual
Battery(AA)
X1
X1
X2
x1
Accessories
Warranty card
Download from Www.Somanuals.com. All Manuals Search And Download.
01
0090504963
Download from Www.Somanuals.com. All Manuals Search And Download.
|