Model # IPD-100
iPad / iPhone / iPod Docking Station Speaker System
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
INTRODUCTION ..........................................................................................................................1
IMPORTANT SAFETY INSTRUCTIONS ...................................................................................2-3
PREPARATION FOR USE ...........................................................................................................4
MAINTENANCE ...........................................................................................................................4
USING THE AC ADAPTOR ..........................................................................................................5
CONNECTING EXTERNAL DEVICES .........................................................................................6
LOCATION OF CONTROLS & INDICATORS ..............................................................................7
REMOTE CONTROL ....................................................................................................................8
OPERATING INSTRUCTIONS .....................................................................................................9
FUNCTION CONTROLS .........................................................................................................9-10
VIDEO OPERATION ...................................................................................................................11
AppClockRadio(VIEW XL) OPERATION ..............................................................................12-17
TROUBLESHOOTING GUIDE ...................................................................................................18
TECHNICAL SPECIFICATION ...................................................................................................19
APPLE DEVICE COMPATIBILITY CHART .................................................................................20
WARRANTY ...............................................................................................................................21
INTRODUCTION
There are many exciting performance enhancements available by downloading the free
AppClockRadio(VIEW XL) from the iTunes App Store.
For information on the AppClockRadio(VIEW XL) and how it works with your IPD-100,
please vist the App Store and download the app Haier website.
Note: app is for iPad / iPhone / iPod touch only.
Download the FREE Clock Radio App to use these features:
· Enlarged display clock
· FM Tuner with 30 preset stations
· EQ function(3D / Jazz / Rock / Classic / Custom)
· Clock with multi Alarm / Sleep / Snooze
· Weather Report Display
1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all
warnings.
2.) Install this unit in accordance with the manufacturer’s instructions.
3.) Only use attachments / accessories specified by the manufacturer.
4.) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the unit. When a cart is used, use caution when moving the cart/unit
combination to avoid injury from tip-over.
5.)
Use replacement parts as specified by the manufacturer.
6.) Do not install this unit near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
The unit shall not be exposed to dripping or splashing water and no object filled with
liquids, such as vases, shall be placed on the apparatus.
7.)
Do not use this apparatus near water and clean the unit with dry cloth only.
Disconnect the unit from the power source when cleaning.
8.)
9.)
No naked flame sources, such as lighted candles, should be placed on the unit.
Keep the player clean and never store it next to a heat source or in dirty, humid or wet
places. Keep it out of direct sunlight.
10.)
11.)
12.)
Do not block any ventilation openings; the ventilation should not be impeded by covering
the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.
Give minimum 100 mm distances around the apparatus for sufficient ventilation.
To prevent fire or shock hazard, do not expose this unit to rain or moisture.
Do not subject the product to harsh impacts. Do not drop the appliance. This may result
in damage to the product and loss of data.
13.)
14.)
Care required with the use of this apparatus in extreme climates.
Do not use this apparatus in an extremely dry environment, as this can lead to static
discharge which can damage the player.
15.)
16.)
This unit may be subject to inoperability to a strong electromagnetic field or other
interference. If this occurs, turn the unit’s power off, then disconnect the power plug from
the “DC IN” on back of unit. After a few minutes, reconnect the power jack into “DC IN”
input to reset the unit software, and the unit should return to normal operation.
To prevent fire or shock hazard, do not use this plug with an extension cord, receptacle
or other outlet unless the blades can be fully inserted to prevent blade exposure.
17.)
18.)
19.) Unplug this unit during lightning storms or when unused for long periods of time.
20.) Where the MAINS plug is used as the disconnect device, the disconnect device shall
remain readily operable.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
21.) Do not destroy the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, do not attempt to force the plug, consult an
electrician for replacement of the obsolete outlet.
22.)
Protect the power cord from being walked on or pinched particularly at plugs,
receptacles, and the point where they exit from the apparatus.
23.)
24.)
Do not overload wall outlet. Only use power source as indicated.
Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks.
25.)
Refer all servicing to qualified service personnel. Servicing is required when the unit has
been damaged in any way, such as power-supply cord is damaged. Liquid has been
spilled into the unit, the unit has been exposed to rain or moisture, or has been dropped,
and does not operate normally.
26.)
27.)
28.)
29.)
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Attention should be drawn to the environmental aspects or battery disposal.
This product is not intended for commercial use. Household use only.
Do not install this apparatus in a confined space, such as a book case or built-in cabinet.
Maintain minimum distance(about 10cm) around the apparatus for sufficient ventilation.
To completely turn off the power, the main plug of the apparatus must be disconnected
from the wall outlet.
30.)
Servicing:
• This unit contains no user serviceable parts. Refer to qualified personnel.
• Consult your dealer if you are ever in doubt about the installation, operation or safety of
this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION FOR USE
Contents:
1x Main Unit, 1x Remote control, 1x Instruction manual, 1x Main adaptor
Unpacking And Set Up
•
Remove the contents from the box and remove all packing material from the main unit.
We recommend that you save the box & packing material in the event that the unit ever
needs to be returned under warranty.
•
Do not remove any labels or stickers from the back panels.
MAINTENANCE
Cleaning The Unit
• To prevent fire or shock hazard, disconnect your unit from the main power source when
cleaning.
•
•
If the cabinet becomes dusty wipe it with a soft dry cloth. Do not use any wax or polish
sprays on the cabinet.
If the cabinet becomes dirty or smudged with fingerprints, it may be cleaned with a soft
cloth. Never use abrasive cloths or polishes, which will damage the finish of your unit.
Caution: Never allow any water or other liquids to get inside the unit while cleaning.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING EXTERNAL DEVICES
Complete the connections as shown below:
• VIDEO connection requires a VIDEO cable(not supplied). See “Video Operation” for
details.
• AUX connection requires a 3.5mm audio cable(not supplied) to connect your external
audio source to the AUX input on the back of the main unit.
COMPONENT
VIDEO OUT
DC IN
AUX IN
Pr
Y
Pb
EXTERNAL DEVICE
Cable(not supplied)
Plug x 1
Plug x 1
NOTE: If an iPod / iPhone / iPad is docked, it must be removed before you can listen to the
AUX input.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS & INDICATORS
1
2
3
4
5
6
7
8
9 10 11
COMPONENT
VIDEO OUT
DC IN
AUX IN
Pr
Y
Pb
1. Universal Dock for iPad
2. Universal Dock for iPod / iPhone / iPad
3. Power Indicator
4.
POWER ON/OFF/PLAY/PAUSE Button
5. VOLUME(-)
6. VOLUME(+)
7. DC IN Jack
8. AUX IN Jack
Button
Button
9. COMPONENT VIDEO OUT Pr Jack
10. COMPONENT VIDEO OUT Y Jack
11. COMPONENT VIDEO OUT Pb Jack
7
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
1
2
1. Remote Control Transmitter
2. Power Button
3. iPod MENU + Button
3
4
4. SKIP
Button
10
5. ENTER Button
5
6
6. iPod MENU - Button
7. PLAY / PAUSE
Button
11
12
13
7
8. VIDEO OUT Button
8
9
9. VOLUME
10. SKIP
Button
Button
11. MENU Button
12. 3D SOUND Button
13. VOLUME
Button
Using The Remote Control
The CR2032 lithium battery is already installed in the remote control. Pull out the small
mylar insulation tab as shown in the illustration to begin using the remote control.
To use the remote controller, point the remote control transmitter on the remote control
toward the remote control receiver on the front panel of the main unit and press the desired
button. The effective range of the remote controller is approximately 20 feet. Please note that
bright sunlight or artificial light may interfere with the proper operation of the remote control.
Battery Replacement
When the remote operation becomes weak or intermittent, it is time to replace the remote
control battery. Pull out the battery holder, remove the old battery and install a new CR2032
battery in the holder as shown in the illustration. Slide the holder back into the remote
control.
NOTE: If the battery is installed incorrectly the remote control will not work.
• Make sure that you have removed
the mlar insulation tab from the
remote control.
• Ensure the system is connected to an AC outlet that is always “live”.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
General Controls
The main functions of this system can be operated by the controls on the top panel of the main
unit, or by the buttons on the remote control. If a specific function can only be operated by the
remote control, this will be clearly indicated in the instructions.
When operating this system with the remote control, make sure that the IR (Infrared) transmitter
on the front of the remote control is pointed at the remote sensor on the front panel of the main
unit.
The effective operating range of the remote control is approximately 20 feet. Please note that
bright sunlight or room lighting may interfere with the remote control operation. If the remote
control is not operating properly, try reducing the brightness of the room or moving closer to the
main unit. Ifthis does not solve the problem, itmay be time tochange the remote control battery.
FUNCTION CONTROLS
This system has two separate docking station so that you can play and charge iPod, iPhone
and iPad. Since this model is ‘Made For iPhone’ certified it is not necessary to place your
iPhone in the Airplane mode to avoid audio interference. You will be able to make and receive
calls, without interference, while the system is in operation.
Use the upper right corner dock for docking iPad model only. Use the another dock for any
docking iPod model, iPad model or any iPhone model.
Docking your iPod / iPhone / iPad
Gently dock your iPod / iPhone / iPad to the 30 pin connector on the front of the unit. Do not
force. If you have not already downloaded the free AppClockRadio(VIEW XL) from the
iTunes App Store, you will see the following message on your iPad / iPhone or iPod Touch
display: “This accessory requires an application that you do not have installed.” The purpose
of this message is to advise you that you must download the AppClockRadio(VIEW XL) to
enjoy the enhanced features of the IPD-100. However, your iPod / iPhone / iPad will work
properly with the IPD-100 even without the AppClockRadio(VIEW XL) installed.
IMPORTANT NOTES:
When you dock an iPhone, iPods or certain newer iPad in the dock there may be a slight
delay before the system recognizes the device and the main menu is displayed. This is because
the system and the docked device must go through an ‘Authentication Process’ before the
docked device can accept any commands. THIS IS NORMAL AND IS NOT AN INDICATION
OF ANY PROBLEM WITH YOUR SYSTEM.
The 4G iPod, iPod Classic and 5G iPod are not supported charging function with this unit.
(This charging operation is not allowed by Apple)
Volume Controls
To increase or decrease the system volume, press the VOLUME
or
button on the
remote control or on the front panel.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTION CONTROLS
If the volume is less than the default level when the unit is set to standby, when the unit is
powered up again the volume will return to the default level.
If the volume is higher than the default level when the unit is set to standby, when the unit is
powered up again the volume will remain at that level.
3D SOUND Button(On Remote Control Only)
This button allows you to choose between the two available audio modes, Virtual Surround
and Standard (Non-Virtual Surround).
(Play/Pause)(on Remote Control Only) – Press this button on the remote control to begin
playback on your iPod/iPhone/iPad. Press again to Pause playback.
/
Skip Forward/Back buttons(on Remote Control Only) - During playback press to
skip forward or backward to the next or previous track.
MENU button(Remote control only) - Press this button to access the iPod / iPhone. This
button operates exactly like the MENU button on the iPod/iPhone itself.
+ / - (Plus/Minus)buttons(on Remote Control Only) - After pressing the MENU button to
access the iPod/iPhone, press the + / - buttons to move up(+) or down(-) within the Menu
display.
ENTER button(Remote Control Only) - After selecting your desired selection in the Menu, by
using the + or - buttons, press the ENTER button to enable that selection.
NOTES: Menu Navigation by remote control does not work on touch screen products
like the iPad, the iPod nano 6th generation.
1.) If necessary, press the
POWER ON/OFF/PLAY/PAUSE button on the main unit or
press /ON button on the remote control to turn the system ‘On’.
2.) To skip forward or backward to different tracks, press the
control.
/
button on the remote
3.) The MENU button on the remote control works the same way as the MENU button on
your iPod/iPhone. Press the MENU button repeatedly to access the Main Menu of your
iPod/iPhone. Press the + / - buttons on the remote control to navigate Up or Down
through the displayed Menu list. When the desired Genre, Artist, Album, or Song is
‘highlighted’ on your iPod Menu display, press the ENTER button on the remote control
to ‘Enter’ or Select’ the highlighted item. If the highlighted item is a specific song,
pressing the ENTER button will begin playback of the song.
4.) To pause iPod playback press the
POWER ON/OFF/PLAY/PAUSE button on the
main unit or
button on the remote control. Press again to release pause and resume
iPod playback.
5.) To turn the system ‘Off’ completely, press and hold the
POWER
ON/OFF/PLAY/PAUSE button for 3 seconds on the front panel or press the
button on
the remote control, until your iPod shuts off and enters the Charging mode. The top
panel power LED lighing turns “off”.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO OPERATION
Connecting the Video Cord to View a Video/Picture from iPod/iPhone/iPad
When viewing a video/picture from iPod/iPhone/iPad on your TV, use a component video cord
(not supplied) to connect the COMPONENT VIDEO OUT jack on the unit and the component
video input on your TV.
• After you have connected the unit, change the video input mode on your TV. For details,
also refer to the insrtuction manual for your TV.
The below diagram show the connection options available.
NOTE: Consult your iPod documentation for details on how to enable video output on you
model of iPod / iPhone / iPad.
COMPONENT
VIDEO OUT
DC IN
AUX IN
Pr
Y
Pb
TV
COMPONENT
VIDEO OUT
DC IN
AUX IN
Pr
Y
Pb
Cable (not supplied)
To Component input of TV
The VIDEO OUT to TV is only available for vertical docking connector the
upper right corner dock is not supported the VIDEO output to TV for the iPad.
Remarks:
• When you have your iPod outputting video and the unit connected to your TV, you may
need to change the output setting to TV output.
• Press the VIDEO OUT button on the remote control to escape the current video playback,
then press ENTER or Play(iPad) to resume on TV screen.
Video play on iPod / iPhone / iPad
NOTES:
TV out with Component out
•
Due to the software used in iPod Nano 3G & iPod Classic, to change the video the
video output mode you will need to press the MENU button to escape the current video
playback, then press ENTER to resume.
• Component video output to television is supported by iPod nano (3rd, 4th and 5th
generation), iPod touch (2nd generation), and iPod classic at 480p or 576p resolution;
and by iPod touch (1st generation), iPhone, iPhone 3G, iPhone 3GS, iPhone 4, and iPad
at 480p or 576p resolution.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
AppClockRadio(VIEW XL) OPERATION
“AppClockRadio(VIEW XL)” : the app-enhanced experience
AppClockRadio(VIEW XL) is an interactive app with IPD-100 for iPhone / iPod and iPod touch
Users. In addition to a full screen clock - with weather, iPod controls, FM Radio and Clock
with wakeup settings such as alarms, music selection, Favorite Radio Station.
“app-enhanced FM tuner”
Works with IPD-100 “App-Enhanced ” products for control the FM Radio.
30 preset stations.
Music and Radio alarm clock
Choose hi-fi tones or music playlists from your entire iPod library or Favorite Radio Station.
Weekday alarm calendar
Program alarms to repeat for any day of the week combo: never, everyday, weekday,
weekend & custom Sleep and snooze timers, and much more...
“app-enhanced preset equalizer”
Works with IPD-100 “App-Enhanced” products for audio performance.
3D / Jazz / Rock / Classic / Custom
Weather widget
Quickly view the current weather or forecast
Set up, download, and launch
1. Plug IPD-100's included AC adaptor into a wall outlet
2. Download and install “AppClockRadio(VIEW XL)” (it's a free app):
Option 1 - Docking your iPhone or iPod touch or iPad onto the IPD-100 will tell you that
“This accessory requires an application you do not have installed.
Would you like to install it from the APP store?”
Option 2 - Visit the app store via iTunes or your iPod touch / iPhone, search for
“Haier AppClockRadio” and download.
3. Launch “AppClockRadio(VIEW XL)”, your social music alarm clock app
NOTE: “AppClockRadio(VIEW XL)” is only available for the iPad, iPhone, and iPod touch.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
AppClockRadio(VIEW XL) OPERATION
Home Screen
Launching “AppClockRadio(VIEW XL)” will bring you to the clock home screen from which
you can control and access all other settings
Weather Widget
• Swipe to view contextual weather forecast for the day ahead
• Change temperature scale, location or turn off via weather
settings
Clock with Custom Background
• Change from 12 or 24 hour mode
• Select any photo in your library for your home screen
background
Settings
• Click icon to access app settings
iPod controls
• Click the iPod icon to bring up the iPod transport music
control panel
EQ Function
• Click icon to access EQ settings
Radio settings
• Click the Radio icon to select the FM Radio station.
Sleep setting
• Click to access sleep settings
Alarm setting
• Click alarm icon to view alarm settings view
App Settings
Manage your setting.
Click to save and return to the app home screen
Select a custom background for the home screen
from your photo library
Select “Auto Lock” ON/OFF
Select “Show Seconds” ON/OFF
Select “Show Weekday ON/OFF
Select 12 Hour with AM/PM or 24 Hour
Slide to control your screen brightness settings for a
bedtime event
Manage your weather settings
13
Download from Www.Somanuals.com. All Manuals Search And Download.
AppClockRadio(VIEW XL) OPERATION
Alarm Settings
Select which day of the week you want the alarm to sound:
(Never, Everyday, Weekday, Weekend or Custom)
Select what alarm tone, music with playlist or favorite
Radio station you want to sleep or wake-to
Select “SNOOZE” time
Set the Alarm Name
Set the Alarm time
Press Sleep icon ' when you're ready to go to sleep...
1.Sleep Stats - starts a log of the time you went to bed and starts calculating sleep duration
14
Download from Www.Somanuals.com. All Manuals Search And Download.
AppClockRadio(VIEW XL) OPERATION
iPod Music Play Settings
Click to add desired songs
Play / Pause
Select Shuffle
Skip UP / DOWN
Select Repeat
Preset Equalizer Settings
Slide to control your
desired sound setting
of EQ
Scroll to select the favorite
EQ setting
3D, Jazz, Rock, Classic,
or Custom
15
Download from Www.Somanuals.com. All Manuals Search And Download.
AppClockRadio(VIEW XL) OPERATION
FM Radio Settings
Click one time to skip
frequency. Click and hold
to Start Auto Search
Click to preset
the favorite stations
Select your Favorite station in this list.
Select your
Area Region.
Select Stereo /
MONO
Learn More
For more questions or to learn more, visit our community forum at
16
Download from Www.Somanuals.com. All Manuals Search And Download.
AppClockRadio(VIEW XL) OPERATION
FAQ
1.iPod Integration - Can I sleep or wake to my iPod library?
Yes. “AppClockRadio(VIEW XL)” is specially designed with iPod support and built-in iPod
controls for navigating your music and wakeup Playlists, Artists, Songs.
2. My “AppClockRadio(VIEW XL)” app software alarm did not sound at the specified time
A. Make sure that the volume of the iPhone or iPod touch is not set at 0 and verify your wake-
to volume settings.
B. The iPhone OS does not currently support 3rd party applications running if the app is
closed, which means that alarms won't work if you exit the app. This is why we suggest
customers use our App-enhanced Speaker Systems to make sure you always have a back-up
alarm. If the app exits, simply relaunch the app and your alarms will automatically pick up
where they left off
C. If you dock your iPod or iPhone into a speaker dock overnight, the speaker dock must be
powered ON to hear your alarms in the morning. Because of Apple requirements for devices
that both charge and play audio, the iPhone and iPod touch's built-in speakers are deactivated
and your alarm will not to sound if you do not leave the power ON. This is another reason why
we suggest customers use our App-enhanced Speaker Systems to make sure you don't have
to remember to leave the power on before going to bed.
3. What happens if I exit the app?
The iPhone OS does not currently support 3rd party applications running if the app is closed,
which means that alarms won't work if you exit the app. This is why we suggest customers use
our App-enhanced Speaker Systems to make sure you always have a back-up alarm. If the
app exits, simply relaunch the app and your alarms will automatically pick up where they left off.
4. My app crashed:
Crashes can happen for reasons in and out of our control. Sometimes they just happen, and
you can reload the app and never see it again.
Believe us, when your app crashes, we feel terrible, but rest assured, we find out about it
through our crash log developer system so that we can track bugs and make improvements.
But also, don't hesitate to email us if there is something you are doing over and over and you
keep crashing. Sometimes crashes are hard to reproduce and depend on your setup, so we
never hate hearing about it so that we can make sure App is working properly for all of our
users.
5. My iPhone screen auto-locks while it is running.
If you manually lock your iPhone screen while our app is running, it will disable the auto-lock-
prevention system for the remaining time you run the app session. If you wish to enable auto-
lock-prevention, please exit and relaunch AppClockRadio(VIEW XL).
Don't worry though, the alarms will still work even if the screen is locked.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Symptom
iPod / iPhone / iPad Player(Example “iPod”)
Solution
Possible Cause
AC adaptor is not plugged into a
Unit does not respond
(no power)
Plug the AC adaptor into a wall
outlet and plug the connector
into the DC IN jack on the unit.
wall outlet or the connector is not
plugged into the DC IN jack on
the back of the unit.
Make sure the dock insert is
the proper fit for the iPod.
Using no or wrong iPod insert
Remove the iPod from the dock
and check for obstruction on the
connections in the dock and on the
iPod. Then reseat it in the dock.
iPod does not dock
properly
iPod did not install properly
Remove the iPod from the dock
and check for obstruction on the
connections in the dock and on the
iPod. Then reseat it in the dock.
iPod does not
respond to the unit
iPod is not installed properly
iPod is locked up
Please make sure your iPod is
working properly before docking
into the unit. Please refer to the
iPod manual for details.
Using first or second generation
iPod, iPod shuffle or other
devices.
This unit cannot control those
iPod or other devices.
Remove the iPod from the dock
and check for obstruction on the
connections in the dock and on the
iPod. Then reseat it in the dock.
iPod did not
charge up
iPod is not installed properly
iPod is locked up/frozen
iPod battery has problem
Please make sure your iPod is
working properly before docking
into the unit. Please refer to the
iPod manual for details.
Remarks:
If trouble shooting does not eliminate the problem, disconnect the DC IN plug from the back of
unit and reconnect after a few seconds. This resets the unit to it’s factory default settings and
results in the deletion ofall previous settings.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATION
1. General
Power requirements
AC Adapter Model: GPE365-100360-1
Input: AC 100-240V ~ 50/60Hz 1A
Output: DC 10V 3.6A 36W
30W
Power consumption
Dimensions of main unit
Weight of main unit
310.0mm(L) x 200.0mm(H) x 121.0mm(D)
1.65 Kg
2. Amplifier
Power Output
10W x 2 THD 10%
3. Speaker system
Impedance
8 Ω 2" Speaker x4 / 2.5" passive woofer x2
4. AUX IN
Input
Max voltage
Impedance
Φ 3.5mm
1 V
47 KΩ
5. Remote Control
Power consumption
Battery size
3V
CR2032
Specifications subject to change without notice.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
APPLE DEVICE COMPATIBILITY CHART
iPod
iPod
4th generation
(color display)
20GB 30GB
40GB 60GB
iPod mini
4th generation
20GB 40GB
4GB 6GB
iPod nano
iPod
iPod nano
2nd generation
(aluminum)
5th generation(video)
30GB 60GB 80GB
1st generation
1GB 2GB 4GB
2GB 4GB 8GB
iPod nano
iPod nano
iPod nano
4th generation(video)
5th generation
(video camera)
8GB 16GB
3rd generation(video)
4GB 8GB
6th generation
8GB 16GB
iPod classic
2nd generation
120GB
iPod classic
iPod touch
80GB 160GB
1st/2nd generation
8GB 16GB 32GB
iPod touch
iPhone
iPhone 3G
4th generation
8GB 32GB 64GB
4GB 8GB 16GB
8GB 16GB
iPad
iPhone 3GS
iPhone 4
16GB 32GB
64GB
8GB 16GB 32GB
16GB 32GB
"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an electronic accessory has
been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been
certified by the developer to meetApple performance standards.Apple is not responsible for the
operation of this device or its compliance with safety and regulatory standards. Please note
thattheuse ofthisaccessory withiPod, iPhoneoriPadmay affect wireless performance.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
This Haier brand product, when shipped in its original container, will be free from defective
workmanship and Materials, and agrees that it will, at its option, either repair the defect or
replace the defective product with a New or re-manufactured equivalent at no change to the
purchaser, for parts or labor for the periods set forth Below:
This warranty does not apply to the appearance of the product or the exterior of the product,
which has been Damaged or defaced, altered or modified in design or construction. It does
not apply to the additional Excluded items set forth below:
The warranty commences on the date the item was purchased and the original purchase
receipt must be Presented to the authorized service center before warranty repairs are
rendered. The limited warranty described herein is in addition to whatever implied warranties
may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE
WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR USE ARE LIMITED TO THE
PERIOD(s) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not
allow limitations on how long an implied warranty lasts, so the above limitation may not apply
to you. Neither the sales personnel of the seller nor any other person is authorized to make
any warranties other than those described herein, or to extend the duration of any warranties
beyond the time period described herein on behalf of Haier.
The warranties described herein shall be the sole and exclusive warranties granted by Haier
and shall be the sole and exclusive remedy available to the purchaser. Correction of defects
in the manner and for the period of time described herein, shall constitute complete fulfillment
of all abilities and Responsibility of Haier to the purchaser with respect to the product, and
shall constitute full satisfaction of all claims, whether based On contract, negligence, strict
duality or otherwise. In no event shall Haier be liable, or in any way responsible for any
damages or defects in the product which were caused by repairs or attempted repairs
performed by anyone other than an authorized service center or dealer; nor shall Haier be
liable, or in any way responsible for incidental or consequential economic or property damage.
Some states do not allow the Exclusion of incidental or consequential damages, so that above
exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE. Warranty period for this product: 90 days
for Labor, and one Year for parts. Additional items excluded from warranty coverage: non
rechargeable batteries.
Where to obtain service: For the location of the nearest Haier authorized service center or to
obtain product Literature, accessories, supplies or customer assistance, please call
1-877-337-3639.
What to do to obtain service: ship or carry in your product to an authorized service dealer or
center .Be Sure to have proof of purchase. If you ship the product, be sure it is packaged
carefully.
Haier America
New York, NY 10018
21
Download from Www.Somanuals.com. All Manuals Search And Download.
|