Haier Refrigerator HFD647AS User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
If you have any questions please contact  
Ithe Customer Care Department as indicated on the warranty card  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Water dispenser  
Download from Www.Somanuals.com. All Manuals Search And Download.  
purchasing a  
please ensure the safe symbols  
are observed:  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
number  
Place  
6
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
away from high  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly of the Door Handle  
Please follow the instructions below when assembling the Refrigerator Door Handle:  
removing  
please follow the instructions  
in reverse.  
Attention:  
Please do not disassemble the Refrigerator door handle.  
If the handle must be taken apart please contact a qualified technician.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please follow the instructions below when assembling the Freezer Door Handle:  
Please do not disassemble the Freezer door handle. If the handle must be taken  
apart please contact a qualified technician.  
See page 12 for instructions on how to connect the water.  
ԡ
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembling the water connection  
Removing and replacing the freezer drawer and ice bin  
For water dispenser product only  
Contents of filter kit  
1
2
3
4
5
6
7
4 m (13 ft) white 6 mm ( ”) tubing  
1 x 200 mm (8”) blue tubing  
1 x pressure reducing valve (PRV)  
1 x double sided foam  
2 x locking keys  
1 x water filter cartridge and head  
1 x tap connection – 15 mm ( ”) BSP  
filter  
Removing and Replacing FreezerDrawer  
1
2
3
4
5
6
7
Fig.1 Water connection kit  
Freezer Drawer  
Important!  
It is imperative the pressure reducing valve (PRV) is fitted prior to the filter. This valve ensures the  
water will not flow back into the mains from the refrigerator water system. If the PRV is not fitted to the  
connection line your Ice & Water refrigerator features may not function in some circumstances.  
It is recommended that an authorised plumber in your state or town is used to install the water  
connection.  
The new tubings supplied with the refrigerator are to be used, old tubings from old Ice & Water  
connections should not be used.  
Installation precautions/warning  
DO NOT use with water that is microbiologically unsafe or of unknown quality without adequate  
disinfection before or after the system.  
WARNING – connect to potable water supply only.  
DO NOT install on line pressure above 900 kPa (130 psi) or below 150 kPa (22 psi).  
DO NOT use on hot water supply (38°C [100°F max.]).  
DO NOT install near electrical wires or water pipes that will be in the path of drilling when selecting  
the location of filter system.  
DO NOT mount filter in such a position so that it will be struck by other items, such as wastebaskets,  
etc.  
DO NOT install the filter in direct sunlight as prolonged exposure to light can weaken plastic  
components.  
DO NOT install in a location that is susceptible to freezing temperatures as damage to the housing  
could occur.  
DO NOT screw filter to fridge.  
AVOID contamination of pipes during installation.  
DO NOT use copper tubing. The plastic tubing supplied should always be used.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18. The first time you require water out of the dispenser, there will be a delay while the water  
reservoir fills up.  
19. Run a further 3 litres (3 qt) through the system, stopping intermittently to ensure the reservoir  
is flushed out. Failure to do this will result in excessive dripping from your dispenser.  
Important!  
All connections must be checked for leaks.  
If unsure of connection process and/or leaks then contact your local plumber to  
install and check the system for you.  
Ensure white 6 mm (¼”) tubing is routed away from sharp objects, sharp  
corners (beware of kinking tube as this will stop water flow), clear of the  
refrigerator unit compartment and not in a location where it can be squashed.  
Ensure all push-fit connections are firmly pushed into place. The tube should  
push in 20 mm (¾”) before reaching the stop.  
If tubing is removed at any point, re-cut the end and re-insert. Tubing must be  
fully inserted to avoid leaks.  
To remove tube from connection points, turn off the isolating tap, push in the  
collet and gently pull tubing at the same time.  
vegetables  
How to Use the Water Dispenser  
Fig.8 Connection to water supply  
Diagram 9  
Available on some models  
FRZTEMP  
FUNCTION  
REFTEMP  
ok  
1.Push the dispensing pad gently,using a glass cup.  
Refer to page 26, About Freezer compartment, for instructions on the first use  
of the ice maker and water dispenser.  
2.If you want to stop the flow of water,release from the dispensing pad.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
First Use  
When preessing the water dispenser tab the first time you may not get water out as air will be in the  
11. Attach double sided foam to the back of the water filter head as shown in  
Diagram 5. Write the date to be replaced on the filter (date installed + 6  
months). Remove double sided foam backing and attach filter to the  
desired position as located in step 10 (refer to previous page).  
12. Run the 6 mm (¼”) tubing to back of the fridge ensuring there is enough  
tubing to pull out the refrigerator for service.  
g
Please throw away the first 5 cups of water to remove any impurities in the lines.  
g
Diagram 5  
13. Connect tubing into the water (solenoid) valve located on the right hand  
side of the unit (compressor) compartment as shown in Diagram 7.  
Beware of hot pipes.  
If you like very cold water first add some ice cubes from the ice storage box.  
g
Fig.6Double sided  
foam attachment  
14. Pull gently on tubing to ensure it is locked in as shown in Diagram 8.  
15. The completed installation should look like Diagram 9 on page 15.  
Do not put hands or other items into the water dispenser or ice storage box.  
Water Dispenser Precautions  
Changing the water filter cartridge  
C
Change the filter after 6 months.  
It is not necessary to turn off the water supply before attempting to change the water filter  
cartridge.  
1
2
Grasp and firmly twist the cartridge in an anticlockwise direction (to the left when installed  
in the recommended orientation) as shown in Diagram 1.  
Pull the cartridge away from the filter head (down when installed in the  
recommended orientation) as shown in Diagram 2.  
– It is not unusual for a few drops of water to be present when the filter is removed.  
Diagram 7  
Diagram 8  
3 Discard old filter.  
4 Filter installation:  
– Remove protective cap on spigot on head.  
– Push the cartridge up towards filter head while rotating it in a clockwise direction (to  
the right when installed in the recommended orientation) as shown in Diagram 3  
5 Dispense 10 L (10 qt) to flush the cartridge, removing trapped air and harmless carbon fines.  
Diagram 6  
Fig.7  
16. Turn isolating tap on and check that all connections are dry and free of drips. If not, please  
alert the plumber.  
17. Coil water line tubing behind the fridge. Push your refrigerator into place being careful not to  
kink or squash the water line running into the water (solenoid) valve.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation instructions:  
1.  
2.  
Ensure that refrigerator is not plugged into a power  
supply.  
Diagram 1  
Fig.2 PRV connection  
Locate isolation tap for water connection – cold water  
feed only (dishwasher or sink mixer taps) – if you can’t  
find the connection tap, contact an authorised plumber in  
your state or town to fit your water connection. Tee and  
tap fitting not supplied.  
3.  
4.  
Connect the 200 mm (8”) blue tubing to the outlet of the  
PRV (blue collet) and the inlet connection of the water  
filter cartridge as shown in Diagram 1. Gently pull on both  
ends to ensure it is locked.  
Connect the white 6 mm (¼”) tubing to the outlet of the  
water filter cartridge as shown in Diagram 2. Gently pull  
to ensure it is locked.  
5.  
6.  
7.  
Measure the required length of tubing to run from the  
PRV to the water connection point.  
Diagram 2  
Cut the tubing making sure the ends are square and  
clean.  
Fig.3 Waterline connection  
to refrigerator  
Connect the tubing to the tap connection and the base of  
the PRV (white collet) and then to the tap as shown in  
Diagram 3. Please note that the tap connection supplied  
should fit most installation situations. If your tap requires  
a different fitting, please contact an authorised plumber in  
your state or town to purchase the correct fitting.  
Connect one locking key to each side of the water filter  
cartridge in between the cartridge and the locking collet  
as shown in Diagram 4.  
8.  
9.  
To flush the water filter and check for leaks, aim the end  
of the tubing into a bucket, turn isolating tap on and run  
at least 3 L (3 qt) of water through. Once complete, turn  
isolating tap off.  
have an  
10. Locate desired position for water filter noting carefully the  
following points:  
It is recommended to fit the water filter in a vertical  
orientation with the water filter head at the top. This  
will minimise water leakage when replacing cartridge.  
Ensure the filter is in a convenient location to access  
every 6 months for replacement. We suggest that this  
location is beside the water filter supply tap in a  
cupboard beside the refrigerator.  
Diagram 3  
Fig.4 Tap connection  
A minimum clearance of 64 mm (2 ½”) from the  
bottom of the filter cartridge is required to perform  
cartridge removal.  
To turn the ice maker on and off  
press (Function) button to scroll to the (  
press (Function) button to scroll to the (  
Do not screw the water filter to refrigerator.  
) screen,(  
) screen,(  
)light on then press(ok),ice maker is turned on.  
)light off then press(ok),ice maker is turned off.  
Diagram 4  
Fig.5 Locking key  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
7
Adjustment  
9
To ensure normal operation,allow the appliance to stand  
still for 6 hours.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control panel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Paint Sprayer H8115 User Manual
Grizzly Saw G1023SLWX User Manual
Groupe SEB USA T FAL Iron GV9360 User Manual
Haier Clothes Dryer GDZ22 1 User Manual
Haier Refrigerator HXC 158 User Manual
Harbor Freight Tools Nail Gun 93760 User Manual
Hasbro Games 08476 User Manual
HP Hewlett Packard Computer Monitor 15 inchhp55 User Manual
Hubbell Stereo System SZ 16 User Manual
Hunter Fan Fan 23483 User Manual