Portable Electronic Icemaker -
Platinum
Machine à glaçons électronique
portable - Platine
Máquina de Hielo Eléctrica
Portátil - Platino
LARGE
MEDIUM
SMALL
ADD
WATER
SELECT
SIZE
ICE
FULL
POWER
ON/OFF
User Manual
HPIM26S / HPIM26W
Guide de l’Utilisateur
HPIM26S / HPIM26W
Manual del Usuario Modelo
HPIM26S / HPIM26W
ß
ß
Quality Innovation Style
Download from Www.Somanuals.com. All Manuals Search And Download.
English
UNPACKING YOUR ICE MAKER
1. Inspect and remove all packing materials. This includes the foam and any
adhesive tape both inside and outside of the unit.
2. Inspect and remove any remains of packing, tape, or printed materials before
powering on your Haier appliance.
Please read this manual carefully before using.
Retain it for your future reference.
PRODUCT REGISTRATION
Keep for your records to obtain
Warranty Service
__________________________
Model number
Thank you for using our Haier product.
This easy-to-use manual will guide you in
getting the best use out of your appliance.
__________________________
Icemaker serial number
__________________________
Date of purchase
Remember to record the model and serial
number. They are on a label in back of
the appliance.
Staple your receipt to your manual.
you will need it to obtain warranty service.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
English
SAFETY INSTRUCTIONS
Electrical Requirements
Wiring and Grounding Instructions
WARNINGS:
This appliance must be plugged into at least a 15 AMP 110-115 VOLT 60 Hz
GROUNDED OUTLET. This appliance must be grounded. It is equipped with a 3-
wire cord having a grounding plug. The plug must be plugged into an outlet that
is properly installed and grounded.
WARNING! Improper use of grounded wire can result in the risk of electric
shock. Consult a physician if necessary. Do not attempt to
defeat this safety feature by modifying the plug.
Avoid the use of an extension cord because it may overheat and cause a risk of
fire. However, if it is necessary to use an extension cord:
A. Use only 3-wire extension cords with 3-blade grounding plug.
B. The marked rating of an extension cord must be be equal to or greater than
the rating of this appliance.
C. It should be positioned such that it does not drape over the counter or
tabletop where it can be pulled on by children intentionally.
Do not, under any
circumstances,
cut, remove,
or bypass the
grounding prong.
Attempting any maintenance or cleaning:
To minimize the possibility of electric shock, unplug this appliance from the power
suply or disconnect at the household distribution panel by removing the fuse or
switching off the circuit breaker before attempting any maintenance or cleaning.
Note
Pressing the Power ON/OFF button to an off position or pressing
START/PAUSE button does NOT disconnect the appliance from the
power supply.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
English
TAblE OF CONTENTS
Important Safeguards................................................................1
Parts and Accessories.................................................................4
Quick Set-Up Instructions...........................................................5
Operating Instructions................................................................6
Pre-Operating Instructions .................................................................6
Operating Instructions.......................................................................6
Operating Process............................................................................8
Cleaning and Maintenance........................................................9
Troubleshooting Guide.............................................................10
limited Warranty......................................................................11
Specifications
Electrical Shock Protection
Power
Model # HPIM26S / W
Class 1
115V/60Hz 2.7 A
1.9 A
Ice Making Current
Ice Compressor Current
Refrigerant
2.7
R134a/2.3 Oz.
Design Pressure
High Side
Low Side
Dimensions
Weight
290 Psig
88 Psig
11.7" x 14.5" x 14.9"
30 lbs.
Enclosure
ABS plastic
4
Download from Www.Somanuals.com. All Manuals Search And Download.
English
PARTS, FUNCTIONS AND FEATURES
1
3
2
4
6
5
7
8
1. Cover with transparent window
2. Ice maker and pusher
3. Water reservoir (Not shown)
4. Control panel
5. Water drain cap: For draining water from ice water
6. Compressor cooling fan (Do not block air flow)
7. Ice shovel
8. Ice basket
5
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Control Panel: Easy to use, button function with LED indicators
A. Power ON LED indicator light
B. Power ON/OFF button
C. Ice cube SELECT SIZE button
D. Selected ice size LED light indicator displaying: SMALL, MEDIUM,
and LARGE ice cubes to make
E. "ADD WATER" (Alerts that there is no water in the water reservoir), must
add water
F. "ICE FULL" LED indicator
D
C
E
F
A
B
Water Drain: Do not any parts. (Failure to put rubber plug back will cause water
to leak.)
A. Drain cap
B. Rubber plug
C. Drain spout
a
b
c
Drain water to store or when
not in use for long periods
6
Download from Www.Somanuals.com. All Manuals Search And Download.
English
OPERATING INSTRUCTIONS
This portable icemaker uses a fully automatic control system, with an advanced
microcomputer for easy and convenient ice making. Making ice is simple and
fast. Just add water, plug into an outlet, and press the ON button. You can
select one of the three ice cube sizes with the touch of a button. When first
turning on the unit or during icemaking cycles, the compressor will stay idle for 3
minutes, while energizing.
There are warning indicators that alert you to fill water when the reservoir is
empty and to remove ice when the storage basket is full. The icemaker also has
built-in safeguards that can limit accidental damage, automatically shutting down
the system when necessary.
Pre-Operating Instructions
Please read carefully.
1.
The incline angle of the icemaker cabinet should not exceed 45˚
during transportation or use. Do not turn the icemaker upside-down.
Doing so could cause the compressor or refrigerating system to operate
incorrectly. When the icemaker is moved or transported, please allow time
for the fluids in the compressor to settle. Before using the icemaker for the first
time, please wait 2 hours after the unit has been leveled and positioned in its
proper place.
2. Please ensure the icemaker is level and on a stable table or platform
to avoid malfunction.
3. The machine must be placed on a dry and level surface with sufficient
ventilation, far from heat sources such as ovens, heaters and corrosive gases.
Leave an 8-inch clearance on all sides of the icemaker for proper ventilation.
4. Do not fill the water reservoir with hot water. This may damage the icemaker.
It is best to fill the water reservoir with water of room temperature or lower.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Operating Instructions
1. Open the top cover, take out the ice storage basket and fill the water reservoir
with drinkable (tap, purified or bottled) 0.8 gallons water to the level mark
and replace the ice storage basket.
Lift ice basket to add water
Make sure that the water level does not reach above the level mark or the
bottom of the ice storage basket. Close the top cover.
Note: During the operation process, if the level of water in the water reservoir
becomes too low, the machine will automatically stop operating and the
"Add Water" indicator will display on the LED.
2. Plug the unit into a grounded outlet. Push the ON / OFF button on the control
panel to turn on the machine.
3. Select the desired size of ice cube by pressing the S, M, or L ice selector
button.
S = Small ice cubes (Approx. 6 minutes)
M = Medium ice cubes (Approx. 9 minutes)
L = Large ice cubes (Approx. 12 minutes)
The icemaker will start making ice soon after. The next cycle of 12 ice cubes
is complete (based on water temperature, ambient room temperature and
selected ice cube size).
Note: To stop the operation, press the ON/OFF button.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Operating Process
1. Water is pumped from the water storage tank to the water box, which may
take up to 1 minute.
2. The icemaking cycle begins when the evaporator rods are dipped into the
water box. You will hear the compressor working.
3. It will take approximately 6-12 minutes for each icemaking cycle, depending
on the size selected. The larger the size, the more time is needed to make the
ice. After the cycle is finished, the water box will tilt forward and the
remaining water will flow back into the water storage tank. The evaporator
rods will then release the ice cubes.
Note: If the room ambient temperature is below 60˚ F, then small or medium
ice cube sizes are suggested to prevent ice cubes from fusing together.
4. Approximately 60 seconds later, the water box will tilt backwards and the ice
pusher will push the ice into the ice storage basket. After the water box flips
back to its original position, the next icemaking cycle will begin.
5. When the maximum capacity of ice cubes is collected and the ice reaches the
temperature sensor, the icemaker will automatically stop operating. The “ICE
FULL” LED indicator will light up.
If more ice is needed, remove the ice from the ice storage basket; then
replace the basket into the machine, making sure that the basket is placed
back to its original position. Note: When replacing the basket, ensure that the
temperature sensor is above the basket so that the machine operates properly.
6. To continue making ice, check that there is water in the water storage tank. If
there is no water in the water storage tank, then no water will be pumped into
the water box, and the operation will stop. The "Add Water" LED display will
light up. Press the “OFF” button. Fill the water storage tank with water, and
then press the “ON” button for the icemaker to begin operating again. Allow
the refrigerant inside the compressor at least 3 minutes to settle before
restarting.
7.
If the compressor stops for any reason such as water shortage, too
much ice, power off, etc., do not restart the machine right away.
Wait at least 3 minutes before restarting the machine.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
English
ClEANING AND MAINTENANCE
Before using your icemaker, it is strongly recommended that you clean the
icemaker thoroughly. Be sure to clean the icemaker regularly.
1. When cleaning, please make sure the power has been turned off and the
plug is disconnected from the outlet. When plugging or unplugging the unit
from the outlet, pull directly on the plug. Never pull on the power cord.
2. Remove the ice storage basket.
3. Drain remaining water from unit. Remove the cap, then the
rubber plug from the spout. When assembling back together,
the rubber plug must be inserted first into the spout, and then
capped. Otherwise, the icemaker will leak.
4. Use a mild detergent diluted in warm water and wipe with a soft
towel or sponge.
Solvents, detergents and abrasives must never be
used for cleaning.
5. Wipe the inner parts, such as the ice storage basket,
water reservoir, water box, ice pusher, and evaporator rods.
6. The outside of the icemaker should be cleaned regularly with a
mild detergent solution, warm water, and a soft cloth.
7. Dry the interior and exterior with a soft cloth.
8. To begin making ice once the unit has been cleaned, pour clean water into
the water reservoir and fill up to the level line follow operating instructions.
Never tilt or place the icemaker on its side, otherwise you must wait
10 hours for compressor coolant to settle.
9. To ensure the cleanliness of the ice cubes, the water in the water storage tank
should be replaced every 24 hours.
10. When the machine is not in use or will not be used for an
extended period of time, unscrew the drain cap, then remove the rubber
plug behind the unit to empty the remaining water in the water reservoir
completely. (Follow the instructions in number 4 above.)
Drain Spout
Drain Cap
Drain Spout
Rubber Plug
10
Download from Www.Somanuals.com. All Manuals Search And Download.
English
TROUblEShOOTING GUIDE
Problem
Possible Causes
Solution
“ADD WATER”
indicator light turns on.
Add water and the icemaker will
operate automatically.
Low water level or lack of water.
There is no indication
on the control panel.
Check that the plug is plugged
into the electrical outlet.
Disconnection of plug.
Turn off the icemaker, pull out
the electric plug, fill it with water
if needed, replace the plug and
then restart the unit. or
Inspect relative parts; remove
the drain cap on the back of
the unit and drain out a small
amount of water. Replace the
drain cap and attempt to use the
Electrical Power Surge
“Ice Full” and “Add
Water” indicators light
up simultaneously.
or
There may be air in the lines or
the lines are blocked. The water unit again.
tank cannot detect water level.
or
Check if ice is blocking the ice
pusher. Turn off the unit; let the
ice melt and restart. Otherwise,
call Haier America Customer
Service.
The “Ice Full” indicator
light is on.
Remove ice from the ice
storage basket to make more.
The ice basket is full.
Plug the unit into a standard
110/120 Volt, 60 Hertz power
source. Please run the icemaker
in temperatures below 90°F
and/or pour colder water into
the water reservoir.
Power is not being supplied
to the unit. The ambient
temperature or the water
temperature is too high.
The unit does not
operate.
Turn off the machine. Start the
machine after the ice block
melts. Or change the size
selector to small ice cubes.
Ice blockage. No ice is
being made.
Making ice takes too much time.
There is refrigerant leakage. A
The icemaking cycle
Consult a qualified
technician or call Haier America
Customer Service.
seems normal but no ice pipe in the cooling system is
is produced.
blocked.
Note: There is protective circuitry inside this icemaker to protect the circuitry from
overheating and the icemaker will automatically shut down to prevent
damage if activated. Please disconnect power cord and restart after 30
minutes of cooling down time.
For Haier America Customer Service, please call: 1-877-337-3639
11
Download from Www.Somanuals.com. All Manuals Search And Download.
English
lIMITED wARRANTY
What is covered and for how long?
This warranty covers all defects in
workmanship or materials for a period of:
12 months for labor
2. There will be no charge to the purchaser
for functional replacement parts and
labor on any covered items during the
initial 12- month period or as stated
above.
12 months for parts (Functional Parts Only)
The warranty commences on the date of
item purchase. Customer shall provide Haier
with proof of the date of purchase and the
original receipt along with: brand, model
and serial number for verification prior to
any warranty service being provided.
3. THIS WARRANTY COVERS APPLIANCES
WITHIN THE CONTINENTAL
UNITED STATES, PUERTO RICO AND
CANADA. IT DOES NOT COVER THE
FOLLOWING:
Damages from improper installation.
Damages incurred during shipping.
Carry-In Service is available for selected
products at the discretion of Haier America.
Defects other than manufacturing. Damage
from misuse, abuse, accident, alteration,
lack of proper care and maintenance
or incorrect current or voltage or acts of
God. Damage from other than household
use. Damage from service by other than
an authorized dealer or service center.
Decorative trims, glass or replaceable light
bulbs. Transportation and shipping costs.
Labor (after the initial 12 months). Credit
or Refund for products over 30 days past
date of purchase. Food loss for food spoiled
as a direct result of mechanical failure of
the product or of any delay in providing
service, repair, replacement. This limited
warranty doesn’t apply to refurbished
product or unit purchased as/like new or
second-hand. THIS LIMITED WARRANTY
IS GIVEN IN LIEU OF ALL OTHER
EXCEPTIONS:
Commercial or Rental Use warranty
90 days for labor 90 days for parts
No other warranty applies.
What is covered.
1. The mechanical and electrical parts of the
appliance which serve the functional
purpose of this appliance are covered
for a period of 12 months or as stated
above. This includes all parts except
finish, trim and glass.
2. The limited warranty does not cover any
credit or refund for any loss or injury
caused by the product or defects to the
product including but not limited to
incidental or consequential damages.
What will be done?
WARRANTIES, EXPRESSED OR INCLUDING
THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
1. Any mechanical or electrical part that
proves to be defective in normal usage
during the specified warranty period
will be repaired or replaced at Haier’s
discretion.
PURPOSE. The remedy provided in this
warranty is exclusive and is granted in lieu
of all other remedies. This warranty does not
cover incidental or consequential damages,
so the above limitations may not apply to
you. Some states do not allow limitations on
how long an implied warranty lasts, so the
above limitations may not apply to you. This
warranty gives you specific legal rights, and
you may have other rights, which vary from
state to state.
ALL WARRANTY SERVICE MUST BE
PROVIDED BY ONLY OUR FACTORY
SERVICE CENTERS, OR BY AN
AUTHORIZED HAIER CUSTOMER
TECHNICIAN.
If it is determined that repair is not
appropriate or replacement parts
are unavailable for repair, Haier will
exchange the product with a refurbished
or new product the same or similar to the
original at its discretion.
Haier America
New York, NY 10018
If you need service, please first see the “Troubleshooting” section of the User Manual. After checking
“Troubleshooting,” additional help is available by calling Haier America Customer Service Hot Line 24
hours a day, 7 days a week. Please call 1-877-337-3639.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|