TFT-LCD TV
TÉLÉVISEURLCD
MANUAL PARA EL USUARIO
HL19SL2/HL19SLW2/HL22XSL2/
HL22XSLW2
OWNER’S MANUAL
GUIDED’UTILISATION
DEL TELEVISOR TFT-LCD
Please READ this manual carefully before operating your TV, and retain it for
future reference.
Veuillez lire ce guide attentivement et entièrement avant d'utiliser votre
téléviseur, conservez ce guide pour vous y reporter ultérieurement.
Se recomienda leer con atención este manual antes de poner en
funcionamiento su televisor y conservarlo para consultas futuras.
01
0090509587
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
Warning
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
CAUTION
RISK ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
!
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
Caution:
!
q
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do
not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
q
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIF ED HEREIN MAY
RESULT IN HAZA DOUS RADIATION EXPOSURE. (This item is only for TV with DVD models.)
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/ Apparatus combination to
avoid injury from tip-over.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
15. The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus
normal use.
Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection.
EN-1
Haier LED HDTV
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
Energy Star 4.0 compliant
By being Energy Star compliant you are assured that your Haier model is helping the
environment by using less energy while saving you money. ENERGY STAR is a joint
program of the U.S. Environmental Protection Agency and the U.S. Department of Energy
promoting energy efficiency.
SAVE THESE INSTRUCTIONS
Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your
product. Remember to record the model and serial number. They are on label in back of the unit.
Model number
serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain warranty service.
Haier LED HDTV
EN-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Choose the Input source ................................................. 10
Video Menu Options..........................................11
Function................................................................................. 11
Audio Menu Options .........................................11
Function................................................................................. 12
Channel Menu Options .....................................12
Function................................................................................. 13
Function Menu Options ....................................14
Warning
1
2
4
Safety Instructions
Introduction
Controls ................................................................4
Connection Options ............................................5
Remote control ....................................................5
Function................................................................................. 14
Lock Menu..........................................................16
Installation
7
Function................................................................................. 16
PC Menu .............................................................18
External Equipment Connections ......................7
USB Input ...........................................................18
Accessories ..............................................................................7
Antenna Connection............................................................7
Choose Your Connection....................................................8
Connecting a VCR..................................................................8
External A/V Source Setup.................................................8
Conmponent Setup..............................................................8
Connecting a computer......................................................9
Cable TV Setup.......................................................................9
HDMI input ........................................................................... 10
To play pictures................................................................... 19
To play music ....................................................................... 19
To play video........................................................................ 20
Maintenance
Specification
Troubleshooting
Warranty
21
21
21
22
Operation
10
Switching On/Off the TV set........................................... 10
Choose the Menu Language.......................................... 10
EN-3
Haier LED HDTV
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Introduction
Controls
This is a simplified representation of the TV front panel, side panel control buttons and side inputs.
TV Side panel controls and connections
INPUT MENU VOL- VOL+ CH-
CH+
POWER
POWER
Press to turn on and off the TV.
1
2
Press to access the input source mode. Press
repeatedly to change the source to the one
you want to watch. In the MENU screen, the
INPUT button serves as the ENTER button.
INPUT
Connect a USB flash drive to view JPEG images
or listen to MP3 songs.
CH+/-
5
6
Menu display. Press to access the on-screen
Power indicator
MENU
3
4
menu display.
Receivers IR signals from the remote control.
Do not put anything near the sensor, which
may block the remote control signal.
Press to adjust the volume. In the MENU screen,
these buttons serve as left/right buttons.
7
Remote Sensor
VOL +/-
Haier LED HDTV
EN-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Connection Options
Back panel connections
DIGITAL OUT
(COAXIAL)
DC IN
USB
HDMI IN
PC IN
Y
Pb
Pr
R
L
-AUDIO-
R
PC/DVI AUDIO IN
VIDEO
L -AUDIO-
L
R
ANT IN
DC IN
Direct current input.
Headphone audio output terminal.
1
2
Component
Input
Connect a component video device to these jacks.
7
8
9
0
A
B
C
Headphone
jack
Connect the audio L/R cables from the video signal
source to these jacks.
AUDIO In
Connect a USB flash drive to view MPEG2 videos,
JPEG images or listen to MP3 songs.
USB input
Digital Out
HDMI In
3
4
5
6
Connect the audio L/R cables from the video signal
source to these jacks.
AUDIO In
Connect various types of digital audio
equipment.
Connect the audio L/R cables from a computer to
this jack.
PC Audio In
AUDIO OUT
PC Video In
Connect a HDMI device to receive digital audio
and uncompressed digital video.
Connect the audio L/R cables to your audio
equipment.
Connect the video signal from a video device to
this jack.
VIDEO In
Connect a video cable from a computer to this
jack.
Antenna
Input
Connect cable or antenna signals to the TV, either
directly or through your cable box.
Remote Control
Battery loading
1. Slide open the cover of the battery compartment on
the back of the remote controller.
2. Load two (AAA) alkaline batteries in the compartment,
(plus and minus poles to respective mark)
3. Replace the cover of the battery compartment.
EN-5
Haier LED HDTV
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Precautions
As strong light may interfere the signals, change your
position to operate the remote controller if the television
cannot be turned on or off as you expect.
Make sure that two AAA alkaline batteries are loaded.
The batteries must be of the same type. The batteries
must be located properly. The batteries are not
rechargeable.
Keep the remote controller away from heat source
or humid area to ensure effective performance of the
remote controller.
Make sure that there is no obstacle between the remote
controller and television set.
Remote control
The remote control cannot be operated unless the batteries are properly loaded.
When using the remote control, aim it at the remote sensor on the TV.
PICTURE
ARC
CCD (closed caption)
INPUT
MENU
Press repeatedly to cycle through the available picture modes
Select the aspect ratio
Select a closed caption option
Show the input source
Press to open the on-screen menu
1
2
3
4
5
14
15
PICTURE
ARC
AUDIO
1
CCD
MTS/SAP SLEEP
16
17
2
3
ꢀ
ꢃ
ꢆ
ꢁ
ꢂ
ꢅ
ꢈ
Thumbstick (Up/Down/ Volume/Channel Selection, Allows you to navigate the on-screen
Left/Right)
ꢄ
ꢇ
ꢉ
6
7
menus and adjust the system settings to your preference.
Clears all on-screen displays and returns to TV viewing from any
menu
18
EXIT
INPUT
19
20
4
5
Press to switch input source to USB in
8
9
0
A
B
C
D
E
F
G
H
USB
MENU
MUTE
USB PLAY/PAUSE
USB fast reverse
USB fast forward
DISPLAY
GUIDE
Power
AUDIO
SLEEP button
MTS/SAP
CH+
6
21
VOL-
VOL+
ENTER
CH-
Press to display the TV status information on the top of the TV screen
Display the guide when you are watching analog or digital channels
Press to turn on and off the TV
Press to cycle through different sound settings
Press to display the sleep timer option
Select MONO, STEREO, SAP in NTSC system
Press to change a channel
Press to select digital channels. For example, to enter “54-3”,
QSFTTꢀiꢁꢂwꢃꢀitꢀwꢀBOEꢀiꢄw
EXIT
RECALL
22
7
USB
REV
PLAY/PAUSE STOP
PREV
REPEAT
NEXT
8
9
23
24
25
26
27
10
11
DISPLAY GUIDE FAVORITE CH.LIST
Number buttons
12
13
28
I tꢀCVUUPO
Switches the sound on or off
Accesses the highlighted item in the on-screen menu
Press to jump back and forth between two channels
J
K
L
M
N
O
P
Q
R
MUTE
ENTER
RECALL
USB REPEAT
USB STOP
USB Next Chapter
USB Previous Chapter
CH.LIST
(For TV without DVD)
Color buttons
Blue
Red
Green
Yellow
UP
DOWN LEFT RIGHT
When functions are attached to the
color buttons, the color buttons are
shown on screen.
Open the channel list in TV
Open the favourite channel list in TV
FAVORITE
Haier LED HDTV
EN-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Installation
External Equipment Connections
Accessories
TV
DVD
STB
CABLE
VCR
PC
AUD
PICTURE AUDIO
HDMI
INPUT
MUTE
RECALL
VOL
CH
MENU
EXIT
ENTER
SLEEP
DISPLAY
USB
REV
PLAY/PAUSE
STOP
PREV
REC
NEXT
REPEAT MTS/SAP FREEZE CH.LIST
GUIDE CCD ARC FAVORITE
x
2
Remote control
Owner’s manual
Alkaline battery (AAA)
Antenna Connection
Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall Antenna
Socket
Bronze Wire
RF Coaxial Wire (75 ohm)
VHF Antenna
UHF Antenna
Turn clockwise to tighten
Bronze Wire
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor Antenna
Be careful not to bend the bronze wire
when connecting the antenna.
„
To improve the picture quality in a poor signal
area, please purchase a signal amplifier and install
properly.
„
„
If the antenna needs to be split for two TV’s, install a
“2-Way Signal Splitter”in the connections.
To install the antenna properly please contact a
professional in your area.
Note
R All cables shown are not included with the TV.
EN-7
Haier LED HDTV
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
external equipment’s output jacks to the TV input
Choose Your Connection
jacks, as shown in the figure.
B
When connecting the TV to external equipment,
match the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
There are several ways to connect your television,
depending on the components you want to connect
and the quality of the signal you want to achieve. The
following are examples of some different ways to
connect your TV with different input sources.
VIDEO
L
-AUDIO-
R
L
R
Connecting a VCR
To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
VIDEO
L
-AUDIO-
R
L
R
ANT IN
How to use
A
Select the input source with using the INPUT button
on the remote control.
VCR
B
Operate the corresponding external equipment.
Refer to external equipment operating guide.
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number.
Component Setup
Connection Option 2
How to connect
A
Connect the audio and video cables from the VCR’s
output jacks to the TV input jacks, as shown in the
figure. When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white,
and Audio Right = red). compared to connecting a
regular VCR to the Video input.
Connect the DVD video outputs (COMPONENT) to the
Y Pb Pr jacks on the TV and connect the DVD audio
outputs to the YPbPr Audio IN jacks on the TV, as shown
in the figure.
Y
Pb
Pr
L
-AUDIO-
R
B
C
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
Select the input source with using the INPUT button
on the remote control, and then press
to select the source, press ENTER button to confirm.
/
button
ꢁ
ꢀ
External A/V Source Setup
How to use
How to connect
A
B
Turn on the DVD player, insert a DVD disc.
Use INPUT button on the remote control to select
A
Connect the audio and video cables from the
proper input.
Haier LED HDTV
EN-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
graphic card or consult the manufacturer of the VGA
graphic card.
Connecting a computer
Note
R Use a DVI cable.
How to connect
R Avoid keeping a fixed image on the TV’s screen
for a long period of time. The fixed image may
become permanently imprinted on the screen.
A
To get the best picture quality, adjust the VGA
graphics card to 1024s768.
R The synchronization input form for Horizontal and
Vertical frequencies is separate.
B
Use the TV’s VGA or DVI (Digital Visual Interface)
Audio IN port for audio connections, depending on
your computer connector.
Y Resolution
q If the graphic card on the computer does not
output analog and digital RGB simultaneously,
connect only one of either VGA IN or HDMI IN to
display the VGA on the TV.
q If the graphic card on the computer does output
analog and digital RGB simultaneously, set the TV
to either VGA or HDMI; (the other mode is set to
Plug and Play automatically by the TV.)
Frame
frequency
(Hz)
Mode
Resolution
VGA
640s480
800s600
60Hz
60Hz
75Hz
60Hz
75Hz
SVGA
XGA
1024s768
C
Then, make the corresponding audio connection.
If using a sound card, adjust the VGA sound as
required.
Cable TV Setup
PC IN
PC/DVI AUDIO IN
After subscribing to a cable TV service from a local
provider you can watch cable TV programming. The TV
cannot display TV programming unless a TV tuner
device or cable TV converter box is connected to the TV.
For further information regarding cable TV service,
contact your local cable TV
9 * $
service provider(s).
Connection Option 1
How to use
A
B
Select 3 or 4 with channel switch on cable box.
Tune the TV channel to the same selected output
channel on cable box.
A
B
Turn on the computer and the TV.
Use INPUT on the remote control to select VGA or
HDMI source.
C
Select channels at the cable box or with the cable
box remote control.
C
Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in VGA mode. If noise
Connection Option 2
is present, change the VGA mode to another
resolution, change the refresh rate to another rate
or adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the VGA
graphic card can not be changed, change the VGA
A
Connect the audio and video cables from the Cable
Box's output jacks to the TV input jacks, as shown in the
figure.When connecting the TV to a Cable Box, match
the jack colors (Video = yellow, Audio Left = white, and
EN-9
Haier LED HDTV
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Audio Right = red).
Select the input source by using the INPUT button
on the remote control or on the TV.
Select your desired channel with the remote control
for cable box.
C
D
When finished using the TV, press POWER button on
the remote control. The TV reverts to standby mode.
B
If you intend to be away on vacation, disconnect the
power plug from the wall power outlet.
C
Note
VIDEO
L
-AUDIO-
R
L
R
ANT IN
R If the TV in power on , the screen show information
according the type of input signal, the information
will disappear. If there is no signal, “No Signal”will
display on the screen.
Choose the Menu Language
When you start using your set for the first time, you must
select the language which will be used for displaying
menus and indications.
HDMI input
A
B
C
Choose TV Input and then press MENU button.
Press CH+/- button to select Function menu.
How To Connect
Press VOL+ or ENTER button and then use CH+/-
ꢂ
Connect the cables from the external equipment's
button to select Language.
output jacks to the TV input jacks, as shown in the figure.
D
Press VOL+/- button to select language.
( English, Spanish or French)
How To Use
Language
OSD Timeout
OSD Transparency Middle
DPMS
Blue Screen
DCR
Time Setup
English
Short
Video
A
Select the input source by using INPUT button on
the remote control or on the TV.
Audio
On
On
On
Channel
B
Operate the corresponding external equipment.
Refer to external equipment operating guide.
Function
Lock
Closed Caption
Default
CH+/-
VOL+/-
Select
EXIT Back
Function
Operation
In the manual, the OSD (on screen display) may be
different from your TV’s, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in
order for your TV to work properly. Read the instructions
that follow.
Choose the Input source
Change the picture source so you can watch your
TV, VCR, DVD, Cable , or any other devices that are
connected to your TV.
A
Press INPUT button to enter the Select Source menu
and then use CH+/- button to select the desired
items (TV, composite, Component, PC, HDMI).
Switching On/Off the TV set
B
Press ENTER button to confirm .
A
B
First, connect power cord correctly.
Select the viewing source by using INPUT button on
the remote control.
Haier LED HDTV
EN-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Y Contrast: Press CH+/- button and VOL+ / ENTER
button to confirm, then press VOL+/- button to
adjust the contrast of the picture.
Video Menu Options
„ Picture quality can be adjusted for any input
separately .
Y Color: Press CH+/- button and VOL+/ ENTER
button to confirm, then press VOL+/- button to
adjust the color saturation.
The picture quality on the screen can be adjusted as
follows:
A
Press MENU button and then use CH+/- button until
the Video menu appears on the screen.
Y Tint: Adjust the tone of the picture.
B
Press VOL+/ ENTER button to enter the menu
function and CH+/- button to scroll up and down to
select the desired function.
Sharpness: Adjust the amount of the detail
enhancement, the image sharpness rises as the
number increases (By increasesing the level, it will
show cleaner and clearer images and by descreasing
the level, it will make the picture smoother).
C
D
Press VOL+/ ENTER button to confirm and VOL+/-
button increase and decrease the level to adjust the
selected option to your preference.
Y Color temperature: This will increase or decrease
Warm(red) and Cool(blue) colors to suipersonal
preferences. Select Cool to give the white colors a
biue tint, Standard to give the white colors a neutral
tint, Warm to give the white colors a red tint. User to
allow you change the color manually.
Repeat step 2 and step 3 until desired picture quality
has been achieved.
Mode
Brightness
Contrast
Custom
Video
50
50
50
0
Audio
Color
Y Advanced Video: To adjust the picture in advanced
level:
Tint
Channel
Sharpness
Color Temperature
Advanced Video
50
Function
Lock
q
DNR: Digital Noise Reduction, to adjust to reduce
the appearance of digitizing errror caused by the
compressin: Medium/Strong/Auto/off/Low.
CH+/-
VOL+/-
ENTER
Select
EXIT Back
Adjust
Video
q
MPEG NR: To adjust the MEPG Noise Reduction:
Medium, Strong, Off and Low.
Note
q
Adaptive Luma Control: To adjust changes in the
luminance of the picture On or Off.
R The options may be different because of the inputs.
q
Flesh Tone: To adjust the flesh colors: High, Off,
R Symbols on top of the menu in this manual may
differ from the actual set display.
Low or Medium.
R The picture options can be changed only in Custom
mode, the other modes are fixed.
q
q
Blue Stretch: To set Blue Stretch: On and Off.
Game Mode: To set Game Mode: On and Off.
Function
Audio Menu Options
Sound can be adjusted for any input as follows:
Y Mode: Select the type of picture which best
corresponds to your viewing requirements by
selecting picture mode in Video menu. You may
select the picture mode directly by pressing the
PICTURE button on the remote control.
A
Press MENU button and then CH+/- button until the
following menu appears on the screen.
Y Brightness: Press CH+/- button and VOL+/
ENTER button to confirm, then press VOL+/-
button to adjust the brightness of the picture.
EN-11
Haier LED HDTV
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
is still normal.
Video
0
50
50
Balance
Bass
Treble
If enter Audio Only mode, press POWER to exit!
Audio
Sound Surround
Equalizer
Speaker
SPDIF Type
AVL
On
Off
Off
Off
Off
OK Cancel
Channel
You can press POWER button to reveal the picture on
Function
Lock
the screen.
Audio Only
CH+/-
VOL+/-
Select
ENTER Adjust
(;,7 Back
Audio
SAP Broadcasts Setup
B
C
D
Press VOL+/ ENTER button to enter the menu
and CH+/- button to go up and down to select the
desired option.
This TV can receive MTS stereo programs and SAP
(Secondary Audio Program) that accompanies the stereo
program; if the station transmits an additional sound
signal as well as the original one.
When having selected SAP button on the remote
control, this TV can only receive the signal when the TV
station transmits the proper signals.
Mono sound is automatically received if the broadcast
is only in Mono; even though Stereo or SAP has been
selected.
Press VOL+/ ENTER button to confirm and CH+/-
button increase and decrease the level to adjust the
selected option to your preference.
Repeat step 2 and step 3 until desired audio quality
has been achieved.
Select Mono if you want to listen to mono sound during
stereo/SAP broadcasting.
Stereo or SAP can be received in a Analog channel.
Function
A
Use the SAP button to select your desired MTS
mode in a analog signal. Each time you press the
SAP button, Mono, Stereoor SAP appear. If other
languages are available on the digital signal, select
them with the SAP button.
Y Balance:Press CH+/- button and VOL+/ENTER to
confirm, then press VOL+/- to adjust the audio
output between left and right speakers.
ꢂ
Y Bass:Press CH+/- button and VOL+/ENTER button
to confirm, then press VOL+/- to increase or
decrease the level of the lower-pitched sounds.
B
Press EXIT button to save and return to TV viewing.
Y Treble:Press CH+/-CH+/- button and VOL+/
ꢂ
Channel Menu Options
ENTER to confirm, then press VOL+/- to increase
or decrease the level of the hꢂigher-pitched
Channel menu will appear in main menu only in TV
mode.
sounds.
Y Sound surround: To turn the simulated surround
sound on or off.
A
Press MENU button and CH+/- button until the
following menu appears on the screen.
Y Equalizer: To adjust the equalizer Off /Rock /Pop /Live
Video
Tuner Mode
Channel Scan
Channel Skip
Channel Labels
Time Shifting Mode
Antenna
On
/Dance/ Techno /Classic and Soft.
Audio
Y Speaker: To adjust the speaker on or off.
Channel
Y SPDIF Type: To adjust the SPDIF output: Off /Dolby
Digital and PCM.
Function
Lock
Y AVL: This will reduces the differences in volume level
among broadcasters.
CH+/-
VOL+/-
Select
EXIT Back
Channel
Y Audio Only: Press VOL+/ENTER button to confirm,
the following display will appear on the screen:
Press VOL- to select OK, then press OK to confirm. The
TV screen will be black and no picture , but the sound
Haier LED HDTV
EN-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
B
C
D
Press VOL+/ ENTER button to enter the menu
and CH+/- button to go up and down to select the
desired option.
Video
Audio
2 Analog
3 Analog
4 Analog
5 Analog
Channel 5-1 Digital
Press VOL+/ ENTER button to confirm and VOL+/-
button increase and decrease the level to adjust the
selected option to your preference.
6 Analog
7 Analog
8 Analog
9 Analog
Function
Lock
10 Analog
Repeat step 2 and step 3 until desired audio quality
has been achieved.
CH+/-
VOL+/-
Select
Set
EXIT Back
ENTER
Channel Skip
Y Channel Labels: Allows you to name the channel
that is selected. Press VOL+/ENTER button to
enter the submenu.
Function
Y Tuner Mode:Press VOL+/ENTER button to select
Antenna or Cable.
Video
Channel Index
Channel Label
1
Audio
Y Channel Scan: Press VOL+/ENTER button to start
to scan, press EXIT to cancel.
Channel
Function
Lock
Video
Status: Scanning...
Analog Channels: 4
Digital Channels: 3
Antenna
Audio
CH+/-
VOL+/-
Select
EXIT Back
Channel Label Set
Channel
Then press CH+/- button to select Channel Index
ꢂ
Function
Lock
and VOL+/- button to select the position of the item that
you want to change, afterward press INPUT to input the
numbers and symbols and ENTER button to confirm.
40%
EXIT Cancel
Channel Scan
Y Time Shifting Mode: To turn the Time Shifting
Mode on or off.
All channels now available will be automatically
preset in order .After the search has finished, the
first program number will display on the screen. This
search automatically adds only the active channels in
your area to the TV's memory. It deletes any channels
on which there is no broadcast or a poor signal. The
channels found are automatically saved.
A
B
Set the Time Shifting On, then insert the USB drive in
the USB input.
Press PLAY/PAUSE to play or pause the program. If
you want to stop time shift function, press the STOP
button.
You can stop the time shift program being played
Y Channel Skip:Press VOL+/ENTER button to
enter the submenu, then press CH+/- button
to select the channel number (eg.2) and press
ENTER to confirm, a mark will be display in the
pane as follows and this channel will be skipped
next time you press CH+/- button but you can press
digits button to select the channel. If you want to
resume the channel, press ENTER button again.
by pressing the STOP button.
-00:00:01
7:00
7:30
-00:00:01
7:00
7:30
1
x
1.Timeshift time. The time offset to the current time.
2.Playback status: It shows the playback status for
timeshift component.
EN-13
Haier LED HDTV
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
PressVOL+/ ENTER button to enter the menu and
CH+/- button to go up and down to select the
desired option.
B
Play
Fast forward
Fast reverse
ꢃ
Pause
3.Playback speed.1x,2x,4x,8x,16x,32x.
4.Playback position. The playback position is always at
the center of the time bar.
5.Time scale, which shows the scales of every half hour.
The text would move smoothly as the time go by. And
the time scale text could be cut-off if the text is on the
boundary.
C
D
PressVOL+/ ENTER button to confirm and VOL+/-
button increase and decrease the level to adjust the
selected option to your preference.
Repeat step 2 and step 3 until desired quality has
been achieved.
Note
R Time Shift function is only available in DTV
Function
mode.
R The maximum recording duration is determined
bduration time can be calculated by the formula.
Y Language:Press VOL+/- button to select language of
the OSD.
R The timeshift record only supports FAT32 file-
system.
Y OSD Timeout: Press VOL+/- button to select Middle
/Short and Long to change thetime of the OSD
display.
R The timeshift record supports more than 4GB
recording. That is, the timeshift data is stored in
multi-file to resolve the FAT32 4 GB limitations.
Y OSD Transparency: Press VOL+/- button to select
among Low/High and Middle to change the
transparency of the OSD. To select Low, the OSD is
opacity.
R The recording buffer is a ring buffer. For ring buffer,
if the maximum recording duration is reached,
the oldest program would be discarded and keep
recording the latest program.
R When changing channel or changing input source,
Y DPMS: PC Power Management. To set On, the set
will be in standby mode automatically if no signal
in 2 minutes; if signal input , the set will be on again
automatically.
the timeshift would stop automatically.
R Timeshift record will store the fact of no signal.
R Timeshift record will store the video, audio and
data service. But because of the limited number of
PID filter in hardware, we only support:
Y Blue Screen: Press VOL+/- button to select On, the
screen will be in blue after 3 seconds if there is no
signal.
Video streams: Max 1 stream
Audio streams: Max 8 streams
CC stream: No limited.
Y DCR: Press VOL+/- button to select On or Off.
Y Time Setup: Press VOL+/ ENTER button to enter the
R In recording, the data is not guaranteed to be
stored in the disk. If the timeshift playback plays
a corrupted data block, it would show “Data lost”
message to indicate that the current data is not
stored correctly
submenu.
q
Time Zone: Press VOL+/- button to select the
appropriate time zone.
Time Zone
Video
Date/Time
Function Menu Options
Sleep Timer
Off
Audio
A
Press MENU button and CH+/- button until the
Channel
following menu appears on the screen.
Function
Lock
Language
OSD Timeout
OSD Transparency Middle
DPMS
Blue Screen
DCR
Time Setup
English
Short
Video
Audio
On
On
On
CH+/-
VOL+/-
Select
EXIT Back
Channel
Time Setup
Function
Lock
q
Date/Time: Press VOL+/ ENTER button to enter
the submenu.
Closed Caption
Default
CH+/-
VOL+/-
Select
EXIT Back
Function
Haier LED HDTV
EN-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
select the Closed Caption options. It helps the
hearing impaired with the broadcast program,
as well as helping children learn how to read. A
built in decoder displays the audio portion of a
program as text on the screen when this option
is selected.
Auto
Date
Time
On
Video
2009/01/01
11:54 AM
Audio
Channel
Timer
Off
On Time
Off Time
11:54 AM
12:00 AM
Function
Lock
CC1: When CC1is displayed on TV means CC
mode is turned on.
CH+/-
Select
VOL+/-
EXIT Back
Date/Time
CC2 to CC4: For other modes of video related
broadcast information.
Auto: Press VOL+/- button to select On or Off . When
ꢂ
Text1: For program guide and other information
displayed by broadcasters. (This blocks a large
portion of the picture on your screen).
Auto mode on , the time can not be adjusted. Select
Off , you can operate to set the time manually.
Date: Press VOL+/- button to select the position and
ꢂ
Text2 to Text4 :For other modes of information
displayed by broadcasters. (This blocks a large
portion of the picture on your screen).
digits button to set the date.
Time:Press VOL+/- button to select the position and
digits button to set the time.
IMPORTANT:Closed captioning availability
entirely depends on broadcasters supplying the
signal. Therefore, closed captioning might not
always be available and language availability will
differ by broadcast.
Timer: Press VOL+/- button to select On or Off . To
select Off, the time can not be adjusted.
On Time/Off Time:Press VOL+/- button to select
the position and digits button to set the time. Press
ENTER button to switch on AM and PM.
Select CC1 for full translation of the primary
language such as English in your area. Select
CC2 for secondary language translation such
as French or any other language that may be
broadcast in your area.
q
Sleep Timer:Press VOL+/- button to select the
number of minutes: To select Off, 5Min, 10Min,15Min,
30Min,45Min,60Min,90Min,120Min,180Min or 240Min.
q
Digital Closed Caption:Press VOL+/- button
Y Closed Caption:Press VOL+/ ENTER button to enter
the submenu.
to select Service1/Service2/Service3/Service4/
Service5/Service6/Off.
Caption Style
Font Size
Font Style
Font Color
Channel Font Opacity
Background Color
Custom
Large
Style 1
Video
Audio
q
Digital Caption Style: Press VOL+/ ENTER
button to enter the submenu.
White
Solid
Black
Caption Style: To display the digital closed caption by
head-end defined or user defined: As Broadcaster and
Custom.
Font Size :To adjust the font size: Large, Small or
Medium.
Font Style :To adjust the font style: Style1, Style2,
Style3,Style4, Style5, Style6 and Style7.
Font Color: To adjust the font color: White, Green, Blue,
Red, Cyan, Yellow, Magenta and Black.
Font Opacity: To adjust the font opacity: Solid,
Translucent and Transparent.
Function
Background Opacity Solid
Black
Solid
Window Color
Window Opacity
Lock
ABC
CH+/-
Select
EXIT Back
DTV Caption Style
VOL+/-
Analog Caption
Digital Closed Caption Off
Digital Caption Style
Off
Video
Audio
Background Color: To adjust the background color:
Black, White, Green, Blue, Red, Cyan, Yellow and
Magenta.
Background Opacity: To adjust the background
opacity: Solid, Translucent and Transparent.
Window Color: To adjust the window color: Black,
White, Green, Blue, Red, Cyan, Yellow and Magenta.
Window Opacity: To adjust the window opacity:
Translucent, Transparent or Solid.
Channel
Function
Lock
CH+/-
Select
VOL+/-
EXIT Back
Closed Caption
q
Analog Caption: Press VOL+/- button to
EN-15
Haier LED HDTV
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Y Default: Press VOL+/ ENTER button to enter the
submenu.
Video
10-1 Digital WCAU-DT
11 Analog
Audio
11-1 Digital MBC DTV
12 Analog
13 Analog
Are you sure?
Channel
14 Analog
14-1 Digital ATSC-1
14-2 Digital ATSC-2
14-3 Digital ATSC-3
15 Analog
Function
Lock
OK
Cancel
Press VOL+/- button to select OK or Cancel, then press
OK to confirm. If OK the parameter will return to the
factory set.
CH+/-
ENTER
Select
EXIT Back
Set
Channel Block
VOL+/-
Press CH+/- button to select the channel you want to
lock, then press ENTER button to confirm. The channel is
locked and a lock mark appears in the pane. If you want
to unlock the channel, repeat the operation above again.
Then press EXIT to exit step by step.
Lock menu
A
Press MENU button and CH+/- button until the
following menu appears on the screen.
Enter Password
Video
Y Program Block: VOL+/ ENTER button to enter the
submenu as follows.
Audio
Channel
Video
Parental Lock
Parental Guide
MPAA Rating
CA Eng Rating
CA Fren Rating
Block Unrated
On
On
Function
Lock
Audio
Channel
EXIT Back
Lock
Function
Lock
B
Press VOL+/ ENTER button ato enter and then press
digits button to input the digits( The initial password
is 0000. If you forget your password, you can always
input 9443 to regain control) . The menu will display
as follows:
CH+/-
VOL+/-
ENTER
Enter
Select
EXIT Back
Program Block
q Parental Lock: Press VOL+/- button to select On
or Off. Used to lock all the system following. To set
Off, the system following can not be available.
Channel Block
Video
Program Block
q Parental Guide: Press VOL+/ ENTER button to
Change Password
Audio
Clean All
Channel
enter the submenu as follows. PressCH+/-/VOL+/-
buttonto select the item you want to lock. Then
press ENTER button to confirm to lock and press
again to resume it. Parental Guide Technology:
The "P.L. Technology" allows you to use U.S. and
Canadian Movies and TV PROGRAMS Guide
ratings to block certain types of TV programs and
movies.
Function
Lock
CH+/-
VOL+/-
Select
Enter
EXIT Back
ENTER
Lock
To clearly understand TV program rating codes,
read the following information:
Function
A
D
L S V FV
Video
TV-Y
Y Channel Block:Press VOL+/ ENTER button to
enter the submenu as follows.
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Audio
Channel
Function
Lock
Allowed Rating Blocked Rating
CH+/-
VOL+/-
Select
Set
EXIT Back
ENTER
Parental Guide
Haier LED HDTV
EN-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
To understand clearly about movie rating codes, read
the following list:
q
U.S. TV Program Ratings
TV-Y: For all children - these types of rated programs
are designed for a very young audience, including
children from ages 2-6.
U.S. Movie Rating Chart
G: General Audience-this type of movie rating means
all ages admitted to see the movie.
PG: Parental guidance suggested. Some material may
not be suitable for children.
PG-13: Parents Strongly Cautioned - this type of movie
rating means some material may not be appropriate
for children under13.
TV-Y7: Directed towards older children - this type of
rated programs may include comedic violence of mild
physical, or may frighten children under the age of 7.
TV-G: General audience-these types of rated programs
contains little or no violence, no strong language, and
little or no sexual dialogue and situations.
R: :Restricted- This type of movie rating means children
under 17 of age require to be with parent or guardian.
NC-17: This type of movie rating means no one 17 and
under admitted.
TV-PG: Parental Guidance Suggested-this type of
rated programs may contain limited violence, some
suggestive sexual dialogue and situations, and rare
language.
X: This type of movie rating means adults only.
q
CA Eng Rating
Press VOL+/ ENTER button to enter submenu as
follows.
Press CH+/- button to select the item you want to lock.
Then press ENTER button to confirm to lock and press
again to resume it.
TV-14: Parents strongly cautioned-these types of
rated programs may contain sexual content, strong
language and more intense violence.
TV-MA: Mature audience only these types of rated
programs may contain sexual violence, explicit sexual
content and profane language.
Video
C
C8+
G
Audio
PG
14+
18+
(A)ALL: Blocks all available sub_ratings.
Channel
Function
Lock
(D)Dialogue: This type of rated programs contain
dialogue with sexual content.
Allowed Rating Blocked Rating
(L)Languag: This type of rated programs contain
offensive language.
CH+/-
Select
VOL+/-
ENTER Set
EXIT Back
CA Eng Rating
(S)Sex: This type of rated programs contain sex.
To clearly understand Canadian program rating codes,
read the following list:
Canadian English Rating Chart
(V)Violence: This type of rated programs contain
violence.
C: This type of programming is intended for children
under age 8. There is no offensive language, nudity or
sexual content.
(FV)Fantasy Violence : This type of rated programs
contain Fantasy and cartoon violence.
C8+: These type of rated programs are generally
considered acceptable for children 8 years and over.
There is no profanity, nudity or sexual content.
G: These type of rated programs are generally suitable
for all audiences.
PG: Parental Guidance Suggested -in these types of
rated programs, some material may not be suitable for
children.
14+: In these type of rated programs, some content may
not be suitable for viewers under the age of 14.Parents
are strongly cautioned not to have their children view
14+ rated programs by pre-teens and early teens.
18+: Adults Only-these types of rated programs are only
for adult viewers only.
q
MPAA Rating
Press VOL+/ ENTER button to enter submenu as
follows.Then press CH+/- button to select the item
you want to lock. Then press ENTER button to confirm
to lock and press again to resume it.
Video
G
PG
PG-13
R
NC-17
X
Audio
Channel
Function
Lock
Allowed Rating Blocked Rating
q CA Fren Rating
Press VOL+/ ENTER button to enter submenu as
follows.
CH+/-
Select
VOL+/-
Set
EXIT Back
ENTER
MPAA Rating
EN-17
Haier LED HDTV
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Press CH+/- button to select the item you want to
lock. Then press ENTER button to confirm to lock
and press again to resume it.
PC menu
A
Press MENU button and CH+/- button to select
Video menu in PC mode.
Video
G
8 ans+
13 ans+
16 ans+
18 ans+
B
Press VOL+/ ENTER button to enter the Video menu
and CH+/- button to go up and down to select the
desired option .
Audio
Channel
Function
Lock
C
D
Press VOL+/ ENTER button to confirm and VOL+/-
button to increase and decrease the level to adjust
the selected option to your preference .
Allowed Rating Blocked Rating
Select
Set
EXIT Back
ENTER
/
CA Fren Rating
Repeat step 2 and step 3 until desired quality has
been achieved.
Canadian French Rating Chart
G: These types of rated programs are generally suitable
for all audiences.
8 ans+: Children 8 years and above (French)
13 ans+: 13 years old and above(French)
16 ans+: 16 years old and above(French)
18 ans+: Adults Only-these types of rated programs are
only for adult viewers only.
Mode
Custom
Video
Audio
Brightness
Contrast
Tint
50
50
0
Color Temperature
Function
Lock
Advanced Video
PC
q
Blocked Unrated
Press CH+/- button to select On or Off. Used to lock all
the channel not rated.
CH+/-
VOL+/-
Select
ENTER Adjust
EXIT Back
Video
Password:
Y PC: Press CH+/- button to select and VOL+/
ENTER button to confirm, the PC menu as below:
Y Change password: Press VOL+/ ENTER button to
enter the submenu, press digits button to input
the number of 0-9 twice in the New Password
and Confirm Password. Then you can change
the password when you input the same number
twice.
Auto Sync
Video
H Position
V Position
Phase
50
50
50
50
Audio
Clock
Function
Lock
Y Clean All: Press VOL+/ ENTER button to enter the
submenu:
CH+/-
VOL+/-
Select
EXIT
Back
ENTER Adjust
PC
Are you sure?
q Auto Sync: Press CH+/- button and then press
button to adjust that automatically adjusts
the available options for the best viewing
configuration.
q H Position: Press CH+/- button and then press
VOL+/- button to adjust the horizontal position of
the picture.
q V Postion: Press CH+/- button and then press
VOL+/- button to adjust the vertical position of
the picture.
OK
Cancel
ꢃ
Press VOL+/- button to select OK or Cancel then OK to
confirm. If OK, the parameter will return to the factory
set.
Note
R If there is any lock mark on the top of the set such
as channel lock, parental lock and so on, you
can press OK to resume it .( Press OK to display
password menu and input your password.)
q Phase: Press CH+/- button and then press
VOL+/- button to adjust the phase of the picture.
q Clock: Press CH+/- button and then press VOL+/-
button to adjust the clock of the picture.
Haier LED HDTV
EN-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
USB Input
A
Supporting media and file format: Digital pictures
(.JPG/.JPEG/.BMP(Baseline & Progressive)/.PNG),
digital music (.MP3(8~320kbps)) and Video(.avi/.
mpg/.mpeg/.vro/.vob/.ts coded with MPEG-1 or
MPEG-2 standard) files.
B
Press MENU button, and the press CH+/- to select
Media Type , Press ENTER and press CH+/- to select
ꢂ
q Due to differences in the file code and file mode,
It is possible that some files cannot be read.
Photo.
B
C
D
Before starting operation, verify USB storage
device is of FAT32 file system format. At present,
this television does not support NTFS and the file
systems of other format.
Supports USB/Memory Card Plug & Play (don't need
to reset TV system),USB Hard-drive support - only
support the class of USB HD that follows USB power
consumption spec.
C
Press CH+/- VOL+/- button to select folder or file, and
then press ENTER button to enter the play interface.
/
The television operation may be halted due to
excessive rate of information code errors. In such
case, restart the system. Please note - there are many
nonstandard USB mobile devices in the market. If a
nonstandard device is used then an identification
problem may occur.
USB Media Menu operation
1. Play mode:
3. File name
4. Pause
None/Dissolve/Wipe right/
Wipe left/Wipe up/Wipe
down/Box in/Box out/
Random
A
B
Plug-in an external storage device into USB port.
5. Duration
Press USB button on the remote to display
multimedia.
2. Play time:
6. Effect
Short/Medium/Long
7. Information
C
D
Press ENTER button on the remote to display the
sub page.
D
Press MENU button to display the option list.
Press EXIT button on the remote to return to the
previous menu.
To play pictures
1. Play/Pause
2. Repeat
4. Duration
5. Effect
A
Press USB button on the remote to enter USB media
system.The system start up takes about 3 seconds.
3. Shuffle
6. Information
q Then insert the USB drive in the USB input.
E
Press the button on the remote control to select the
adjusted item, press ENTER button to confirm.
EN-19
Haier LED HDTV
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
6. Play previous picture
7. Play next picture
3
2
1
PLAY/PAUSE STOP
REPEAT
REV
PREV
NEXT
7
5
6
4
1. Play/Pause
2. Repeat
3. Shuffle On or Off
4. Show Info
5. Show Spectrum
6. Audio Only
F
Press EXIT button to return to the previous menu.
Press USB button to exit the USB mode.
Note
R You may play the pictures among selected.
E
Press the button on the remote control to select the
adjusted item, press ENTER button to confirm.
To play music
1. Play or pause
3
2
1
2
Stop
PLAY/PAUSE STOP
REPEAT
A
Press USB button on the remote to enter stream
3. Repeat
REV
PREV
NEXT
media system.
4. Fast reverse
5. Fast forward
6. Play previous music
7. Play next music
7
5
6
4
F
Press EXIT button to return to the previous menu.
Press USB button to exit the USB mode.
B
C
Press MENU button, and the press CH+/- to select
Media Type , Press ENTER and press CH+/- to select
Music.
Note
R You may play the music among selected.
Press CH+/- VOL+/- button to select folder or file, and
/
To play video
then press ENTER button to enter the play interface.
A
Press USB button on the remote to enter stream
media system.
1. Play Time
2. File Name
3. Repeat
4. Shuffle On or Off
5. Audio Only
B
C
Press MENU button, and the press CH+/- to select
Media Type , Press ENTER and press CH+/- to select
Video.
ꢂ
6. Information
D
Press MENU button to display the option list.
PressCH+/- VOL+/- button to select desired video
/
folder, and then press ENTER button to enter the
play interface.
Haier LED HDTV
EN-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation/Maintenance/Specification/Troubleshooting
cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug
the power cord before you begin any cleaning.
Cleaning the Screen
A
B
Here’s a great way to keep the dust off your screen
for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing
detergent. Wring the cloth until it’s almost dry, and
then use it to wipe the screen.
1. Play Time
2. File Name
3. Repeat
4. Shuffle On or Off
5. Audio Only
6. Information
D
Press MENU button to display the option list.
Make sure the excess water is off the screen, and
then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
lint-free cloth. Please be sure not to use a wet cloth.
1. Play/Pause
2. Repeat
4. Picture Mode
5. Screen Mode
Extended Absence
3. Show Info
E
Press the button on the remote control to select the
adjusted item, press ENTER button to confirm.
If you expect to leave your TV dormant for a long time
(such as a vacation), it’s a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.
1. Play or pause
3
2
1
2
Stop
PLAY/PAUSE STOP
REPEAT
3. Repeat
REV
PREV
NEXT
4. Fast reverse
5. Fast forward
6. Play previous music
7. Play next music
Specification
7
5
6
4
F
Press EXIT button to return to the previous menu.
Press USB button to exit the USB mode.
Product Specification
19''
22''
Resolution(Dot)
1366 s 768
120V~ , 60Hz
Note
1920 x 1080
R Do not remove USB device from the TV until
you have exited the USB mode otherwise you
may damage the USB device.
Power requirement
Stand-by
Consumption
less than 1W
Color system
NTSC, ATSC, Clear QAM
75 ohm
External Antenna
Impedance
Maintenance
16,770,000 (256 steps of
each R, G and B)
Color
Maintenance
Early malfunctions can be prevented. Careful and regular
EN-21
Haier LED HDTV
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting / Warranty
Operating
Temperature Range
Verify if correct channel is selected.
Adjust the antenna.
Make adjustments by Fine Tune
and Manual Scan.
32~104 0F (0~40 0C)
No picture
in some
channel
Operating Humidity
Range
Less than 80%
No color
for some
channel
program
(black and
white)
Verify if the same problem exists in
other channels.
Check out of picture and sound
systems.
Refer to relative instructions in the
Manual for color adjust.
Maximum Elevation 6561 feet (2000m)
Remote control
Batteries
User manual
Accessories
Quick start guide
Verify if the antenna is correctly
connected.
Verify if the antenna is in good
condition.
Spots with
some or all
pictures
* The specifications shown above may be changed
without prior notice for quality improvement.
Make fine adjustment of channel.
Horizontal/
vertical bars
or picture
shaking
Check for local interference such
as an electrical appliance or power
tool.
Troubleshooting
Disconnect the television from
power supply and, 10 seconds
later, connect the television to
the power supply. If the problem
still exists, contact authorized
after-sales service for technical
assistance.
Troubleshooting
„ For the sake of time and cost, it is strongly
recommended that you check out the problem
by yourself according to the instructions listed
hereunder before contacting the after-sales service
for technical assistance.
Television
out of control
Verify if the television is properly
plugged.
Note
No picture,
R Do not leave the television with static picture in
an extended period as the image may become
permanently burned.
Verify if the television is properly
no sound
supplied power.
Verify if electricity is available.
Verify if correct signals are input.
Press INPUT button to change
Note
R The TV set must only be repaired by a qualified
registered service person. Never attempt to remove
the back cover as the TV set has dangerous voltages
levels inside that may be fatal or cause fire.
Blank screen
signal input to TV input.
Restart the television of power
supply is interrupted.
Press Mute button and verify if
Mute mode is set.
Switch to other channel and verify
if the same problem happens.
Press VOL+ button to see if the
problem can be solved.
Warranty
No sound
Warranty
Verify if sound system is correct.
Refer to Page 18 for adjustments.
This Haier brand product, when shipped in its original
container, will be free from defective workmanship and
materials, and agrees that it will, at its option, either repair
the defect or replace the defective product with a new or
remanufactured equivalent at to the purchaser, for parts
Poor sound
Haier LED HDTV
EN-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
or labor for the periods set forth below:
customer assistance, please call 1-877-337-3639.
What to do to obtain service: ship or carry in your
product to an authorized service dealer or center. Be
sure to have proof of purchase.
If you ship the product, be sure it is packaged carefully.
Haier America
This warranty does not apply to the appearance of the
product or the exterior of the product, which has been
damaged or defaced, altered or modified in design
or construction. It does not apply to the additional
excluded items set forth below:
New York, NY 10018
The warranty commences on the date the item was
purchased and the original purchase receipt must
be presented to the authorized service center before
warranty repairs are rendered.
The limited warranty described herein is in addition
to whatever implied warranties may be granted to
purchasers by law. ALL IMPLIED WARRANTIES INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR USE ARE LIMITED TO THE PERIOD(s) FROM THE DATE
OF PURCHASE SET FORTH BELOW. Some states do not
allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other
person is authorized to make any warranties other than
those described herein, or to extend the duration of any
warranties beyond the time period described herein on
behalf of Haier.
The warranties described herein shall be the sole and
exclusive warranties granted by Haier and shall be the
sole and exclusive remedy available to the purchaser.
Correction of defects in the manner and for the period
of time described herein, shall constitute complete
fulfillment of all abilities and Responsibility of Haier to
the purchaser with respect to the product, and shall
constitute full satisfaction of all claims, whether based
on contract, negligence, strict duality or otherwise. In
no event shall Haier be liable, or in any way responsible
for any damages or defects in the product which were
caused by repairs or attempted repairs performed by
anyone other than an authorized service center or
dealer; nor shall Haier be liable, or in any way responsible
for incidental or consequential economic or property
damage. Some states do not allow the exclusion of
incidental or consequential damages, so that above
exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
Warranty period for this product: one year parts and
labor.
Additional items excluded from warranty coverage: non-
rechargeable batteries. Where to obtain service: For the
location of the nearest Haier authorized service center
or to obtain product literature, accessories, supplies or
EN-23
Haier LED HDTV
Download from Www.Somanuals.com. All Manuals Search And Download.
|