COMBINED 21" TV AND DVD PLAYER
OWNER'S MANUAL
TV
+
The Owner`s Manual for the Follow Model:
DTA-2198, DTA-2198PF,DTA21F98
Please read this manual carefully
before using this TV set and keep it
for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and cautions
1. When you clean the TV set, please 4. Do not place the TV set near rain or
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
moisture as it may cause an electric
shock, or the TV set to catch fire. The
TVsetmustonly
beusedindryin
door locations.
2. In order to prolong the live of the
product, please use in a well
ventilated location.
5. The back cover must only be
removed by a registered electrical
service person. Removing the back
cover may result in electric shock, fire
or damage to
the TV set.
6. If the TV set is not going to be used
for a long time, or there is a severe
thunder & Lighting storm, it is
recommended that the TV set be
disconnected from the AC power outlet
and the aerial plug removed.
3. Don't place the
TV set in direct
sunlight or near a
heatsource.
Cleaning the tube
If the picture tube require cleaning, disconnect the power and use a dry
soft cotton cloth. Do not use any cleaner or abrasive cloths.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Aerial Connection
If the picture is not clear or is snowy, it is recommended that an External Aerial
is used, this is usually mounted outside.
300 twin-lead cable
Antenna adapter
(Not supplied)
COAXIAL
Aerial input
75 standard
coaxial type
75 coaxial cable
Plug
(Not supplied)
AC power socket
Note:
* It is recommended that a 75 ohm coaxial antenna is used to avoid
interference.
*To avoid interference from electrical signals, do not bind the antenna
cable together with any mains lead.
Preparation for the remote control
Battery installation
Tips for remote operation
!When the remote control will not be used
for a long period of time or when the
batteries are worn out, remove the
batteries to prevent leakage.
!
!
Remove the battery cover.
Insert two size AA batteries matching
the +/-polarities of the battery to the +/-
marks inside the battery compartment. ! Do not throw the batteries into fire.
Dispose of used batteries at your local
recycling centre.
!
Do not drop, dampen or disassemble
the remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Buttons and External Sockets
Front panel of the TV set
VIDEO L-AUDIO-R
Video R/LAudio
Power Switch
Play the DVD
Power Indicator
TV/DVD MENU
V-
V+
P-
P+
Stop the DVD
Open/close the DVD
Channel Position up/down
The DVD Player
Menu
TV/DVD Switching
Volume up/ down
Signal Receiver
Rear panel of the TV set
Digital audio coaxial output terminal
COAXIAL
COAXIAL
TV EXT
TV SCART Terminal
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Buttons on the remote control
Stand By
DVD Open/close
DVD 10+
POWER
SCAN
ZOOM OPEN/CLOSE
10+
Scan
SWAP
CALL
MUTE
Zoom
Mute
Former Program
Call Screen Display
Program Number
(No available)
TV/AV Exchange
Digital Selector
TV/DVD
1
5
2
6
0
3
7
4
8
TV/AV
-/--
9
I/II
TV/DVD
P+
Volume/Channel Selection
MENU
MENU
V-
V+
DVD Audio
AUDIO
P.STD
Picture Mode
P-
DVD STOP
STOP
REV
PAUSE/STEP
SETUP
TUNE
NEXT
Tune Menu Button
DVD SETUP
FWD
PREV
DVD PAUSE/STEP
DVD FAST REVERSE
DVD FAST FORWARD
DVD MENU
D.MENU
A-B
REPEAT
SLOW
PLAY/ENTER
DVD NEXT
DVD PREVIOUS
DVD REPEAT
DVD PLAY/ENTER
DVD A-B REPEAT
DVD Cursor Move button
TITLE/PBC SEARCH
ANGLE
PROGRAM
D.CALL
SUBTITLE
UP
LEFT
RIGHT
DVD SLOW
DVD ANGLE
DOWN
EXIT
DVD SEARCH
DVD PROGRAM
DVD TITLE
PICTURE SOUND
TIME
FUNCTION
DVD SUBTITLE
DVD CALL
TELETEXT BUTTONS
Exit Screen Display
PICTURE MENU BUTTON (Red)
Green Button
FUNCTION MENU BUTTON (Blue)
TIME MENU BUTTON (Yellow)
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on/ off the TV set
This section explains the use of the power button and remote handset
to turn your unit on and off.
Switching on/ off the TV set
Switching on/ off the TV set
1 Please press the power switch to switch on AC
power supply and the power indicator will light.
2 If the indicator is lighting in red, press the button
on the remote control again.
Note
1 When you don't operate the TV set with a
remote control, you can turn on it directly
through pressing the channel buttons on the TV set
(Child Lock must be turned off).
4
AUTO
BG
2 If you want to exchange to standby status,
POWER
please press down the button
control.
on the remote
3 If you want to fully switch off the power supply
for the TV set, please press the power switch
button on the TV set.
Auto switch-off function
If transmissions are finished for the day, the
Automatic Power Off feature will put the TV to
standby automatically. The Automatic Power
Off feature will not operate in AV mode or
when the background is set to off (see page
18).
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
You can watch TV program in a preset channel.
Watching TV program
How to select TV program
Select the desired program
1 Using "Program number" buttons
1
5
9
2
6
0
3
7
4
8
Directly enter thechannel number withthe numeric keypad
on the remotecontrol.
To select channel numbersfrom 10 ~99 press [-/--]button
and enter thetwo digit channelnumber
To select channel numbersfrom 100 ~218 press [-/--]button
twice and enterthe 3 digitchannel number
2 Using the P+/- buttons
Press the P+button to increasechannel number.
Press the P-button to decreasechannel number.
P+
Select the desired sound
Press the V-/+ buttons on the remote or the front of the TV
set to adjust the volume level. The range is 0~100. When the
volume buttons are pressed the volume level is displayed
automatically on the TV screen.
MENU
V-
V+
P-
Press the TUNE button, the
TUNE menu shown on the right
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
display on the screen.
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
P+
MENU
V-
V+
If the picture colour is incorrect
This may be due to the TV being set to the incorrect
standard. Use P+ or P- to select Colour then the V+ /V-
buttons to select. Press the EXIT button to save the
setting.
P-
If the picture sound is abnormal
Use the CH+/- buttons to select Sound then press the
VOL-/+ buttons to select the sound system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV continued
Swapfunctionenablesquickswaptothelastwatchedprogram.
Auto scan function enables automatic successive scanning of all the programs in
memorywith "OFF"skipstatus(eachchannelwilllastabout2seconds).
Program swap and auto scan functions
Program swap
1 Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
18
AUTO
BG
SWAP
8
AUTO
BG
2 If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
18
AUTO
BG
3 If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
Auto program scan
1 Press the SCAN button to
scan through all the memorized
TV channels. The scan will
pause for about 2 seconds on
each channel.
SCAN
1
AUTO
BG
SCAN
2
AUTO
BG
SCAN
3
AUTO
BG
SCAN
1
AUTO
BG
SCAN
2 If you want to stop the function
during auto scanning, simply
presstheSCAN button again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
This TV set has three methods to set the channels, which are respectively full
automatic, semi automatic and manual fine tune.
-
In this section, how to use the remote control to set the channel is explained. You
can also use the buttons on the TV set to set channel.
Full automatic mode
TUNE
1 Press the TUNE button, the
TUNE menu shown on the right
display on the screen.
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
2 Press the P+/- buttons to
select "AUTO SEARCH".
P+
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
MENU
V-
V+
SKIP
P-
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
3 Press the V+ button to
ensure automatic search
function operates. All channels
now playing program will be
automatically preset in order .
After the search has finished,
the first program number will
display on the screen.
Display function
CALL
Press the CALL button, then
the channel number and the
systems will be displayed on
the screen.
3
AUTO
BG
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Semi-automatic search
Semi-automatic search
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
buttons to choose desired
channels I.E. channel 1
1
AUTO
BG
TUNE
2 Press the TUNE button, the
TUNE menu shown on the right
display on the screen.
3 Press the P+/- buttons to
select " SEARCH".
P+
TUNE
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
MENU
V-
V+
SKIP
P-
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
4 Press the V-/+ buttons to
6
start searching.
The V- down button is used for
lower side program search.
The V+ up button is used for
higher side program search.
Repeat this step, till find the
desired channel.
SEARCH
152.25MHz
To turn off the on-screen menu
In general, after you press the MENU button, the menu item
display (PICTURE, TIME, FUNCTION, TUNE, EXCHANGE,
ETC.) will automatically disappear within 15 seconds. If you
want to eliminate these contents immediately, please press
the EXIT button.
EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Manual fine tune
Manual fine tune
If the picture and/or sound are poor, try using the FINE
TUNE feature. Do not use this feature unless
reception is poor.
P+
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels I.E. channel 1
1
AUTO
BG
MENU
V-
V+
P-
TUNE
2 Press the TUNE button, the
TUNE menu shown on the right
display on the screen.
3 Press the P+/- buttons to
select " FINE TUNE".
TUNE
COLOUR
SOUND
BAND
AUTO
VHFL
OFF
0
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
P+
MENU
V-
V+
P-
4 Press the V-/+ buttons all
through to carry out fine tune,
till the best picture and sound
are obtained.
5
FINE TUNE
152.25MHz
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching channel
Continued
Program skip
Program skip
Channels can be set so that they are skipped during
program selection.
P+
1 Press the P+/- buttons or
PROGRAM NUMBER 0-9
button to choose desired
channels I.E. channel 1
1
AUTO
BG
MENU
V-
V+
P-
2 Press the TUNE button , the
TUNE menu shown on the right
display on the screen.
TUNE
TUNE
3 Press the P+/- buttons to
select "SKIP".
COLOUR
SOUND
BAND
AUTO
BG
VHFL
OFF
0
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
4 Press the V-/+ buttons to
turn the SKIP function "ON".
P+
MENU
V-
V+
TUNE
5 Press the TUNE button to close
the menu. When you use the P+/-
buttons to select channel, this
channel will be skipped. However,
you can still use the PROGRAM
NUMBER buttons to select the
skipped channel numbers.
COLOUR
SOUND
BAND
AUTO
BG
P-
VHFL
ON
0
SKIP
PROGRAM
SEARCH
FINE TUNE
AUTO SEARCH
If you want to recover the skipped channel
1 Use the PROGRAM NUMBER buttons to select the channel
number to be recovered.
2 Repeat those steps just now.
3 Press the V-/+ buttons to turn the SKIP function "OFF".
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Multiple picture modes
How to select picture modes
You can quickly select the desired picture mode from
four preset modes and one customized mode.
STANDARD
P.STD
Press the P.STD button to select the
RICH
desired picture quality. Five kinds
of picture modes (i.e., "STANDARD",
USER
"RICH", "USER","LISTEN",
LISTEN
"SOFT" ) can be selected in turn.
SOFT
The 5 modes are
Listen-This is a new feature that blacks out the TV
screen when listening to music only channels;
Soft-Designed for night time low light viewing;
Standard -Designed for rooms that have good all round
lighting;
Rich-Designed for rooms with high ambient lighting such
as daytime sport;
User-A spare setting that can be adjusted to personal
tastes.
How to customize your own picture status
PICTURE
1 Press the PICTURE button, the PICTURE menu shown on
the right display on the screen.
PICTURE
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
*HUE
48
32
48
40
60
2 Press the P+/- buttons to
select the item to adjusted,
then press the V-/+ buttons
to obtain the desired effect.
P+
BLACK STRETCH OFF
MENU
V-
V+
P-
I T E M
Press V -
Press V +
Weak
Dark
CONTRAST
BRIGHTNESS
COLOUR
Strong
Bright
Deep
Shallow
Soft
SHARPNESS
*Hue
Sharp
lean to purple
lean to green
Note:
The "Hue" item only appears when the colour system is NTSC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Continued
Black Stretch Automatically increases the contrast range
Noise Reduce Picture Noise & Grain Reduction Circuit. (Use only on poor reception)
Black stretch and noise reduce
How to select BLACK STRETCH
PICTURE
1 Press the PICTURE button, the
PICTURE menu shown on the
PICTURE
right display on the screen.
CONTRAST
BRIGHTNESS
COLOUR
48
32
48
40
60
SHARPNESS
*HUE
P+
BLACK STRETCH OFF
2 Press the P+/- buttons to
select "BLACK STRETCH".
MENU
V-
V+
P-
PICTURE
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
*HUE
48
32
48
40
60
3 Press the V-/+ buttons to
turn the BLACK STRETCH
function "ON" or "OFF".
BLACK STRETCH ON
How to select NOISE REDUCE
FUNCTION
1 Press the FUNCTION button,
the FUNCTION menu shown on
FUNCTION
BACKGROUND
the right display on the screen.
ON
ON
ON
OFF
ON
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
P+
2 Press the P+/- buttons to
select "NOISE REDUCE".
MENU
V-
V+
P-
FUNCTION
BACKGROUND
NOISE REDUCE
FADE
ON
ON
ON
OFF
ON
3 Press the V-/+ buttons to
turn the NOISE REDUCE
function "ON" or "OFF".
CHILD LOCK
AVL
CALENDAR
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient picture and sound control functions
Continued
Mute and Fade function
Sound mute
1 Press the MUTE button on the
remote control to turn off the
MUTE
MUTE
sound. MUTE will appear on the
top left of the display.
2 Press MUTE again to turn the
sound back on.
FADE FUNCTION
Using on/off fade function, the TV turn on or turn
off mild.
FUNCTION
1 Press the FUNCTION button,
the FUNCTION menu shown on
FUNCTION
the right display on the screen.
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
OFF
ON
P+
2 Press the P+/- button to
select FADE.
OFF
ON
MENU
V-
V+
3 Press V-/V+ buttons to turn
the FADE function ON or OFF.
P-
Download from Www.Somanuals.com. All Manuals Search And Download.
Time functions
Clock setting and timer on/off functions
Clock setting
The clock will only work if the TV set if left turned on
or in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the front panel, the clock losespower and will need to
be reset when the power is reconnected.
TIME
1 Press the TIME button, and
the TIME menu display on the
screen.
P+
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
1
MENU
V-
V+
2Press the P+/- buttons select
"CLOCK", then press the V-/+
buttons to adjust the time in
hour position; press again the
P+/- buttons to select the time
in minute position, then press
the V-/ +buttons to adjust the
value of minutes .
--:--
0
--:--
1
P-
On/off timer
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
TIME
1 Press the TIME button to call
up the TIME menu on the
screen.
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
1
--:--
0
2 Press the P+/- buttons to
select "ON TIME", then press
the V-/+ buttons to set the value
in hour position; press again the
P+/- buttons to select the minute
position and set the value of the
minute.(take 18:00 as an
--:--
1
P+
MENU
V-
V+
example)
P-
3 Press the P+/- buttons to
select "ON PROG", then press
the V-/+ or program direct
number buttons to select your
desired channel (take 8 as an
example).
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
0
--:--
1
4 Repeat step 1-2 to set OFF
TIME.(take 23:00 as an example)
Download from Www.Somanuals.com. All Manuals Search And Download.
Time functions
Continued
Sleep timer and program preset
Sleep timer
The TV set have 18 sections
0
option for sleep timer function
(each section has a time
interval of 10 minutes) (See right
chart):
10
20
TIME
170
180
1 Press the TIME button, and
the TIME menu display on the
screen.
P+
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
2 Press the P+/- buttons to
select "SLEEP TIMER".
17:18
18:00
8
MENU
V-
V+
23:00
120
--:--
1
3 press the V -/+ buttons to set
the value of the SLEEP TIMER.
P-
REMIND PROG function
Program remind timer, that displaysan on-screen reminder
prompt, when aprogram on adifferent channel is due tostart.
1 Press the TIME button to call
up the TIME menu on the
screen.
TIME
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
17:18
18:00
8
23:00
120
2 Press the P+/- buttons to
select "REMIND TIME", then
press the V-/+ buttons to set
the value in hour position;
press again the P+/- buttons to
select the minute position, and
then set the value of the
minute.(take 19:00 as an
example)
19:00
1
P+
MENU
V-
V+
3.Press the P+/- buttons to
select "REMIND PROG", then
press the V -/+ buttons or the
program direct number buttons
to set the desired channel
(take 18 as an example).
TIME
CLOCK
ON TIME
ON PROG
OFF TIME
SLEEP TIMER
REMIND TIME
REMIND PROG
P-
17:18
18:00
8
23:00
120
19:00
18
NOTE: For REMIND PROG to
operate CHILD LOCK must be
turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up function
Screen saver and childlock functions
How to start screen saver function
When the background
function if ON a bouncing
'NO SIGNAL' will be
displayed on a blue
back ground.
NO SIGNAL
FUNCTION
1 Press the FUNCTION button
,
the FUNCTION menu shown on
the right display on the screen.
FUNCTION
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
2 Press the P+/- buttons to
P+
select "BACKGROUND" and press
the V-/+ buttons to turn the
MENU
V-
V+
BACKGROUND function "ON" .
P-
Child lock function
Enables the TV front control buttons to be locked.
1 Press the FUNCTION button
,
FUNCTION
the FUNCTION menu shown on
the right display on the screen.
2 Press the P+/- buttons to
select "CHILD LOCK" and press
the V-/+ buttons to turn
P+
FUNCTION
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
ON
ON
MENU
V-
V+
CHILD LOCK function "ON" .
P-
NOTE:
All the control panel buttons on the front of the TV are disabled
when CHILD LOCK is turned on. The power switch will still turn
the TV set off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up function
Continued
AVL and calendar functions
AVL function
Automatic Volume Limit Control reduces the effect of
large volume changes. For instance, when
advertisements come on.
FUNCTION
1 Press the FUNCTION button
,
the FUNCTION menu shown on
the right display on the screen.
FUNCTION
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
P+
MENU
V-
V+
2 Press the P+/- buttons to select
"AVL" .
FUNCTION
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
P-
ON
ON
ON
OFF
ON
3 Press V-/+ buttons to turn the
AVL function "ON" or "OFF"
.
Calendar function
FUNCTION
Enables the TV sets internal calendar to be set.
1 Press the FUNCTION button
,
the FUNCTION menu shown on
the right display on the screen.
FUNCTION
BACKGROUND
NOISE REDUCE
FADE
CHILD LOCK
AVL
CALENDAR
ON
ON
ON
OFF
ON
2 Press the P+/- buttons to select
"CALENDAR" , then press the
V-/+ buttons to the CALENDAR
display on the screen.
P+
MENU
V-
V+
P-
3 Press the P+/- buttons to turn
the YEAR/MONTH/DAY, press
V-/+ buttons to set or adjust
the YEAR/MONTH/DAY.
Download from Www.Somanuals.com. All Manuals Search And Download.
Position exchange function
Exchange
Exchange
This feature enables TV programs that may be on a wrong TV
channel number to be swapped/exchanged. This feature is
very useful when Automatic Search Tuning has been used, to
reallocate the found programs to the correct channel numbers.
1 Press the MENU button
till the EXCHANGE menu
display on the screen.
,
P+
MENU
V-
V+
EXCHANGE
PROGRAM 1
PROGRAM 2
EXCHANGE
6
2
P-
2 Press the V-/+ buttons or the
PROGRAM NUMBER 0-9
buttons to set PROGRAM 1 TO 6.
3 Press the P+/- buttons to
select " PROGRAM 2".
P+
MENU
V-
V+
4 Press the V-/+ buttons or
P-
the PROGRAM NUMBER 0-9
buttons to set PROGRAM 2 TO 9.
EXCHANGE
PROGRAM 1
PROGRAM 2
EXCHANGE
6
9
5 Press the P+/- buttons to
select "EXCHANGE".
P+
MENU
V-
V+
6 Press the V-/+ buttons to set
"EXCHANGE".
P-
EXCHANGE
PROGRAM 1
PROGRAM 2
EXCHANGE
6
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Teletext is an information system, broadcast by certain channels, which can be read like
a newspaper . It also provides subtitles for people with hearing difficulties or those who
are unfamiliar with the language in which a particular program is being broadcast (cable
networks, satellite channels, etc.).
Teletext
Teletext functions
To select Teletext press the Teletextbutton on the
handset. To switch off Teletext, press thebutton again.
Note all menufunctions are notavailable in Teletext
mode . Only afew direct buttoncontrol functions are
available in TELETEXT mode, they are:
Volume adjustment, but without OSD display.
Mute function, but without OSD display.
P+
Page up/down
Use the P+/- buttons to browse next or previous page.
MENU
V-
V+
P-
Page number entering
To select a Teletext page, enter the page number using
the numeric key pad on the remote control, or use the
P+ or P- buttons, or the coloured Fast text buttons.
1
5
9
2
6
0
3
7
4
8
Mix mode
To view the TV picture while in Text mode press the
button, this will superimpose the Teletext data on top
of the Tv picture. Pressthis button againto return to
Full text.
INDEX
TUNE
Press the tune button to go to the index page of teletext.
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Continued
Teletext
Cancel mode
This feature allows the TV picture to be displayed while next
page to be searched is entered and found. Only the top
teletext line is displayed until the page is found. Press the
button to hide the teletext information. Either press the
button or the Text button to exit the cancel display mode.
Language change
Pressing the button will change the Teletext characters
between Eastern and Western.
Hold
Pressing the
button will stop the teletext page automa-
tically updating. This feature is very useful where there are
several teletext pages or data on the same page number.
Size
Pressing the
button changes between full screen top
half bottom half full screen. This feature is very useful as it
magnifies the image making the characters easier to read.
Reveal
Pressing the
button will reveal hidden text. This feature
is used to reveal information such as answers to Teletext
on-line interactive puzzles.
Subcode / Time
By entering its 4-digit number to enter a secondary page;While
in normal TV mode only, pressing the button will display the
teletext time in the top right hand corner for a few seconds.
Switch teletext on/off
Press the
On/Off.
button on the remote control to turn teletext
Fast text coloured buttons
Fast text automatically displays the four most commonly
used pages that the broadcaster thinks that you may want
to choose next. Press the same coloured button on the
remote control as the coloured link at the bottom of the
teletext page to go directly to that page.
PICTURE SOUND
TIME
FUNCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
Basic Playback
Preparations
Stop playback
1. Press STOP
button to go to stop mode, the TV
Press the TV/DVD button on the remote control
or the TV to enter the DVD status.
screen will show the start logo. For some discs the
player can recall the location where stopped, such
as DVDs and audio CDs.
2. Press PLAY/ENTER to resume play-back from the
location where playback was stopped.
3. Press STOP twice to stop completely.
Play must thenresume from thetitle beginning.
Basic playback
1. Press OPEN/CLOSE to open the disc tray,
place a disc on the disc tray.
There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If the
disc is out of the guide, it may damage the disc
and cause the DVD player to malfunction.
Do not place a disc which is unplayable in this
DVD player.
Previous and Next
During Playing, pressingthe PREV
keywill
restart the currentchapter and skipchapters
backwards with eachsubsequent press untilthe
start of thedisc is reached.
Each press ofNEXT
skip the currentchapter and playthe next one.
2. Press OPEN/CLOSE to close the disc tray, the
playback will automatically start.
key duringplaying will
Some discs do not start automatically. Press
PLAY/ENTER tostart playback.
In the case of CD audio and photo discs the next
track, song or photo is selected.
3. Some discs may start playback with a menu. Use
the cursor buttons on the remote control to select
menu options and press PLAY/ENTER to start. You
may also press the digit buttons to select a menu
option directly. Many DVDs will not allow this during
start-up.
Fast forward and Fast reverse
1. Press FWD
to fast forward through the disc.
button is pressed, the
Each time the FWD
fast forward motion speed changes.
2. Press PLAY/ENTER to resume normal playback.
Pause playback
3. Press REV
to fast reverse through the disc.
button is pressed, the
Each time the REV
1. Press PAUSE/STEP to pause playback (still mode).
The sound will be muted during still mode.
fast reverse motion speed changes.
4. Press PLAY/ENTER to resume normal playback.
2. Press PLAY/ENTER to resume normal playback.
Single step playback
1. When paused, press PAUSE/STEP repeatedly
to single step forward frame by frame in the video.
2. Press PLAY/ENTER to resume normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Advanced Playback
IMPORTANT NOTE:
ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION
AND DISPLAY ON SCREEN WILL BE SOME DIFFERENCE.
PROGRAM
SBUTITLE
When playing discs, press "PROGRAM" to enter
program mode. Starting with program number "01"
highlighted, press the digit buttons to select the title
and chapter number that you want. When finished
move the cursor to select "START" . This will start
the program playback.
Press " SUBTILTLE ", the screen will display "SUBTI-
TLE 01/XX XXXXX", "01" indicates the ordinal
number of this language; "XX" indicates total number
of language; "XXXXXX" indicates the language of
country. (the number of language depends on disc).
This function can select up to 32 languages display-
ed on screen.
SEARCH
Press " SEARCH " once to display Disc Go To --:--,
use numeric key to enter the desired time of Disc.
Press " SEARCH " twice to display Track Go To --:--,
use numeric keys to enter the desired time of track.
Press " SEARCH " 3 times to display Select Track
--/03, use numeric keys to enter the desired track.
REPEAT
Press " REPEAT " and Chapter repeat will be
displayed on screen, the second press will display
Title repeat, the third press will display All repeat,
the fourth press will cancel this function.
SLOW
A-B
Press SLOW to play a disc in slow forward. Each
time the SLOW button is pressed, the slow
motion speed changes.
Press " A-B " to begin start-point, press again
to set an end point and complete setting. The
selected section A-B will be repeated. The third
press will cancel this function.
Press PLAY/ENTER to resume normal playback;
Note: This function is invalid for CD and MP3.
ANGLE
When enjoying sports, concert or theatre, press this
key to watch same actions in different angles. (Valid
for discs possessing this function. Using a disc
recorded in multi-angle you can view the scene from
different angles,for example,front, side, whole view
and exterior scene).
TITLE/PBC
With some DVD discs pressing this key will display
the title menu. You can then use the digit buttons
to select the item you prefer.
D.MENU
AUDIO
Press this key can change the audio mode.
such as: Audio 1/2: AC 3 2 CH English
Audio 2/2: AC 3 5.1 CH English
Press this key to display root menu,select item
according to your preference. (This function will work
with a DVD having a multi-layer menu.)
For CD audio, press this button to cycle between
Mono Left, Mono Right, Mix-Mono and Stereo.
D.CALL
Note: When press this button continuously, you must
above 3 seconds interval.
Pressing this key will cycle through "title elapsed",
"title remain", "chapter elapsed", "chapter remain"
and "display off ". Each displays the appropriate
time information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Function Playback
JPEG DISC PLAYBACK
When a disc containing standard JPEG picture files is inserted into the player, a
navigation menu will be displayed automatically. Use the UP and DOWN cursor
buttons to select a file then press PLAY/ENTER. The slide show will commence.
Press PREVIOUS or NEXT to move between pictures. Press pause to stop on the
current picture. Press PLAY/ENTER to resume normal playing.
JPEG disc contains with JPG-format picture information which can be decoded by micro-
computer software and output through video output interface for enjoying on TV screen.
Such function can be used in many domains. For example, in education, teachers can
change those pictures for class into JPG-format file by digital camera or scanner, which is
commonly used in computer, and record them into CD-R disc through disc recorder. It
will be convenient for and direct to the students when teachers play the disc by TV set
or other equipment in class. That reduces teachers' repetition work and good for
reservation (information in disc can be reserved for more than 100 years); in family, users
can record pictures which formed by digital camera or scanner into CD-R disc. Suppose
one picture occupies about 100K bytes, then one disc may record about 6000 pictures;
in commerce, manufacturers can show the products pictures one by one to consumers.
NOTE: The actual content will be different as per disc.
MP3 PLAYBACK
When playing an MP3 disc, a navigation menu will be displayed automatically. In the
menu, use UPor DOWN cursorbuttons to choosethe folder, then press
PLAY/ENTER to enter thefolder. Usethe UP and DOWN cursorbuttons to select
the file andpress PLAY/ENTER. Pressing theLEFT cursor button will takeyou to
the previous screen/menu.
SCREEN SAVER FUNCTION
This unit employs a screen saver mode to help protect the tube during static video
pictures. This can be turned off on the GENERAL SETUPPAGE (see Pg. 27)
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
DVD System Setup
General Setup Process
1.Press the SETUP button, the
General Setup Page,Preference
Page will be displayed in turn.
SETUP
..General Setup Page..
.
3:Ps
.
3:Lb
Tv Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB
4
On
4
2.Press to select, the
or
item, then press to enter the
submenu.
ENG
16
9
Off
Scen SaveO
PLAY/ENTER
or
3.Press to select then
press PLAY/ENTER to confirm.
..Preference Page..
PAL
AUTO
NTSC
TV Type
Parental
Password
Default
PAL
4.Press SETUPrepeatedly to
exit the set-upmenus.
General Setup Page
ASPECT RATIO DESCRIPTION
When using the DVD with the internal TV,
select 4 3/LB.
..General Setup Page..
The following information applies only
when the DVD output is connected to an
external TV.
TV Display
Angle Mark
OSD Lang
Spdif Output
Caption
LB
4:3/Ps
4:3/Lb
16:9
On
ENG
SETUP
Off
4
3/PS (PS = Pan and Scan)
Screen Saver Off
You may select if you have a normal aspect
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
PLAY/ENTER
4
3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
16
9
You may select this if you have a widescreen (16:9) TV. Back bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
General Setup Page
ANGLE MARK: Users can select a particular
.
camera angle when playing a DVD which offers
..General Setup Page..
multiple angles.
This item allows you to set Angle Mark ON or OFF.
Tv Display
Angle Mark
OSD Lang
Spdif Output
Captions
LB
On
On
Off
ENG
On
Screen Saver Off
SPDlF OUTPUT MODE: Sets the audio outputs.
This DVD player includes three kinds of audio output:
1. SPDlF OFF: An analog surround sound format is output through the
back-paneI connections for 2-CH audio out or 5.1 CH audio out.
2. SPDlF/RAW or SPDIF/PCM: This
..General Setup Page..
Tv Display
Angle Mark
LB
On
OSD Lang
Spdif Output
Caption
ENG
Spdif Off
surround sound format is output to a Dolby Digital/DTS decoder
through the coaxial connector on the back panel of the product.
On
Spdif / Raw
Spdif / Pcm
Screen Saver Off
CAPTIONS: This functionallows you to display or hide the caption.
..General Setup Page..
Tv Display
Angle Mark
LB
On
OSD Lang
Spdif Output
Caption
ENG
Off
On
Off
Screen Saver On
SCREEN SAVER: If the screen saver is on,then there
will be an animated picture of DVD on the screen
whenever the DVD player is idle for more than 3
minutes .
..General Setup Page..
Tv Display
Angle Mark
LB
On
OSD Lang
Spdif Output
Caption
ENG
Off
Screen Saver On
On
Off
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
Preference Page
The Preference Page is only available when there is no disc
in the player. These settings are applied consistently to all
discswhichareinsertedandplayed.
SETUP
TV TYPE: This player
..Preference Page..
supports different TV output,
including MULTI(Auto),
PAL
AUTO
NTSC
TV Type PAL
Parental
NTSC, and PALsystems.
Usually please set to MULTI.
Password
Default
PLAY/ENTER
PARENTAL: The parental
control function works in
conjunction with the
..Preference Page..
different censorship classes
assigned to DVDs. These
classes help to control the
types of DVDs that the family
watches, There are up to 8
censorship classes for DVDs.
TV Type PAL
Parental
2 G
3 Pg
4 Pg 13
5 Pgr
6 R
7 Nc17
8 Adult
Off
Password
Default
Note:
1 To change this setting you must enter your password.
(Initial password is 1234)
2 When set to OFF, all discs may be viewed.
PASSWORD CHANGE:
You can change your password
by entering 4 digits. Your must
confirm the 4 digits before the
new password can be accepted.
..Preference Page..
TV Type PAL
Parental
Password
Default
Change
Old Password
New Password
Confirm Pwd
NOTE:If you forgetyour password
or a password is accidentally set
enter 1369 as the password. This
will enable you to regain control.
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup(Continued)
DVD System Setup
DEFAULT: Resets all settings
(except password and parental
lock status) for this DVD player
back to the manufacturers
original settings. Press ENTER
to perform the reset.
..Preference Page..
TV Type PAL
Parental
SETUP
Password
Default
Reset
PLAY/ENTER
Note:
Some functions may not be available depending on the type of disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
The following discs can be played:
You cannot play discs other than those listed above.
You cannot play discs of non-standardized discs, even if they may be labelled as above.
The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few cases,
their performance may be not very well or even no performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Protection and DVD Characteristics
Compare DVD disc with other discs:
DVD
LD
SVCD
VCD
CD
Digital/
MPEG I
Encode
method
Digital/MPEG
Digital
Digital
Analog
Single- Double Single- Double-
side
-side
side
side
650MB
650MB
650MB
Capacity
single- single double- double-
layer
4.7G
-layer layer
layer
17G
8.5G
9.4G
Single-side
60 minutes
double-side
120 minutes
133
minutes minutes minutes minutes
242
266
484
45 minutes 74 minutes 74 minutes
Playing Time
Disc diameter
12cm/8cm
30cm/20cm
12cm
12cm
12cm/8cm
No more than
430 line
Horizontal
resolution
No more than No more than
More than 500 line
350 line
250 line
Picture
proportion
One kind
One kind
Multiple kinds
32 kinds
One kind
16 kinds
at most
Subtitle
4 kinds
4 kinds
at most
4 kinds
at most
Language
2 kinds
2 kinds
8 kinds
48KHz, 96KHz/
6, 20, 24bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
44.1KHz/
16bit
Sound quality
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the TV set to the other video and audio equipment
Connection of AV input /output terminal
You can attach optional equipment such as anotherTV or other audio
amplification equipment to the scart/digital coaxial sockets at the rear
of the set to enjoy higher quality sound and picture.
Amplifier
To COAXIAL
type digital
audio input
Coaxial cable
COAXIAL
TV EXT
To TV EXT
To TV EXT
To outside input
To video/audio input
DVD, VCD and other reproducing equipment
Stereo
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
To assist in location possible faults use help guide below.
BREAKDOWN PHENOMENON
CHECKING
PICTURE
SOUND
The aerial direction and connection
Picture with snow
Noise
This is called ghosting which can be minimized with
an outside aerial, and good quality cable and
terminations. Altering the aerial direction can also
minimize this effect.
Double or Triple Image
Normal
Electrical interference which can be caused by cars,
motorbikes etc, Fluorescent lamps and dirty
insulators on overhead power cables.
Noise
Disturb
Volume Sound mute
Normal
No Picture
No colour
No sound
Ensure that the power supply is connected to
the TV setand turned on. Also ensure that the
TV set is not in "Listen Mode" or that the
brightness and contrast are not turned down.
No sound
Adjust colour control
Adjust channel again
Normal volume
Normal or Weak Volume
Scramble
Colour Purity faultwhich can becaused by movingthe
TV set, placingmagnets near theTV screen orturning
on/off house holdappliances such asvacuum cleaners
near the TVset. Turnthe TV off with themains power
switch for 15minutes. When thepower is turnon again
the TV setwill automatically degaussthe picture. In
server cases leavethe TV setturned off overnight.
Colour Spot
Normal volume
Note:
1.If the fault can not be repaired using the above guide consult with your local authorized service
center.
2.The TV set must only be repaired by a qualified registered service person. Never attempt to
remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the
materials in the cabinet expanding with room temperature changes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
The specifications offered you here are only for reference and, with the improvement
of the products ,there may be some different between the description and the practicality.
Specifications
Colour system
PAL,SECAM,NTSC(AV)
Sound system
I,BG,DK
Picture tube
21"colour picture tube (51cm viewable)
Sound output power
2X2W 10% THD
Power requirements
150V-240V 50/60Hz
Power consumption
80W
Dimension mm
504 Width x482 Depth x512 Height
mm
Remote control
Owner's manual
Battery(AA)
x1
x1
x2
Accessories
NOTE
Design and specifications are subject to change without notice.
Dimensions quoted in this manual are approximate.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
01
0090508552
Download from Www.Somanuals.com. All Manuals Search And Download.
|