Haier DVD Player DTA 1486 User Manual

DTA-1486  
COMBINED 14" TV AND DVD PLAYER  
OWNER'S MANUAL  
TV  
+
Please read this manual carefully  
before using this TV set and keep it  
for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and cautions  
1. When you clean the TV set, please 4. Do not place the TV set near rain or  
pull out the power plug from AC outlet.  
Don't clean the cabinet and the  
screen with benzene, petrol and other  
chemicals.  
moisture as it may cause an electric  
shock, or the TV set to catch fire. The  
TVsetmustonly  
beusedindryin  
door locations.  
2. In order to prolong the using life of  
the TV set, please place it in a well  
ventilatedlocation.  
5. The back cover must only be  
removed by a registered electrical  
service person. Removing the back  
cover may result in electric shock, fire  
or damage to  
the TV set.  
6. If the TV set is not going to be used  
for a long time, or there is a severe  
thunder & Lighting storm, it is  
recommended that the TV set be  
disconnected from the AC power outlet  
and the aerial plug removed.  
3. Don't place the TV  
set in direct sunlight  
ornearaheatsource.  
Explanation on the display tube  
Should the picture tube require cleaning, disconnect the power and use a dry  
soft cotton cloth. Do not use any cleaner or abrasive cloths.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Aerial connection  
For an optimum high quality picture, it is strongly advised that the TV set connect to an  
external aerial(s) using high quality coax cable. When connecting to HiFi VCRs, satellite  
(or cable) set top boxes, that the AV terminals are used to allow the stereo sound to be  
transferred.  
300 twin-lead cable  
Antenna adapter  
(additional purchase)  
Mixer  
additional  
purchase  
75 coaxial cable  
Antenna input  
75 standard  
Plug  
(additional purchase)  
AC power socket  
coaxial type  
Preparation of the remote control unit  
Battery installation  
Take off the battery compartment cover. Place two AAbatteries, make sure that battery  
polarity matches with the +/- mark inside the battery compartment.  
Operation notes for the remote control unit  
Under normal conditions, the life time of batteries is one year.  
If you don't intend to use the unit for a long period or the electricity of the batteries is  
used up, remove the batteries to prevent batteries acid from leaking into the battery  
compartment.  
Never place batteries in a fire.  
Avoid dropping the remote control and/or getting it wet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function buttons and external sockets  
Front panel the TV set  
Power Indicator  
Signal Receiver  
Power Switch  
The DVD Player  
Play  
the DVD  
Menu  
Channel Position  
up/down  
Video  
R/L  
Audio  
TV/DVD  
Switching  
Stop  
the DVD  
Open/close  
the DVD  
Volume up/ down  
Rear panel of the TV set  
TV EXT  
TV EXT  
TV SCART Terminal  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buttons on the remote control  
Buttons on the remote control  
Stand By  
DVD Open/close  
(Not available)  
Scan  
POWER CALENDAR TIME OPEN/CLOSE  
SCAN  
SWAP  
CALL  
MUTE  
Time Menu  
Mute  
Former Program  
Call Screen Display  
Program Number  
(Not available)  
TV/AV Exchange  
Digital Selector  
TV/DVD  
1
5
9
2
6
0
3
7
4
8
TV/AV  
-/--  
TV/DVD  
P+  
Volume/Channel Selection  
MENU  
MENU  
V-  
V+  
Exit Screen Display  
Picture Mode  
EXIT  
P.STD  
P-  
DVD STOP  
STOP  
REV  
PAUSE/STEP  
SETUP  
(Not available)  
DVD SETUP  
FWD  
PREV  
NEXT  
DVD PAUSE/STEP  
DVD FAST REVERSE  
DVD FAST FORWARD  
DVD MENU  
D.MENU  
A-B  
REPEAT  
SLOW  
PLAY/ENTER  
DVD NEXT  
DVD PREVIOUS  
DVD REPEAT  
DVD PLAY/ENTER  
DVD A-B REPEAT  
DVD Cursor Move button  
TITLE/PBC SEARCH  
ANGLE  
AUDIO PROGRAM ZOOM  
D.CALL  
H.LOCK  
UP  
SUBTITLE  
10+  
LEFT  
RIGHT  
DVD SLOW  
DVD ANGLE  
DVD SEARCH  
DVD Audio  
DOWN  
DVD TITLE  
DVD PROGRAM  
DVD CALL  
DVD SUBTITLE  
Zoom  
DVD 10+  
(Not available)  
(Not available)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching on/ off the TV set  
In the following, the methods of using power switch and remote controller to switch  
on/off power supply for the TV set will be explained.  
Switching on/ off the TV set  
Switching on/ off the TV set  
1 Please press the power switch to switch on AC  
power supply and the power indicator will light.  
2 If the indicator is lighting in red, press the button  
on the remote control again.  
Note  
1 When you don't operate the TV set with a  
remote control, you can turn on it directly  
through pressing the P+/- buttons on the TV set  
(Child Lock must be turned off).  
4
AUTO  
DK  
POWER  
2 If you want to exchange to standby status,  
please press down the POWER button on the  
remote control.  
3 If you want to fully switch off the power supply  
for the TV set, please press the power switch  
button on the TV set.  
Auto switch-off function  
When the "Back" function is on, if an empty  
channel is selected or the TV programs are  
ended for the day, the power will be switched off 5  
minutes later automatically. If the "OFF TIME" is  
on, it will be switched off according to the  
presetting time. The auto power off function does  
not work under video input or when the  
background is off.  
(Note: If the "off timer" is less than 5 minutes, it  
will be switched off automatically to the preset  
Time. )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
You can watch TV program in a preset channel.  
Watching TV program  
How to select TV program  
Select the desired program  
1 Using "Program number" buttons  
Directly enter thechannel number withthe numeric keypad  
on the remotecontrol.  
To select channel numbersfrom 10 ~99 press [-/--]button  
and enter thetwo digit channelnumber  
To select channel numbersfrom 100 ~218 press [-/--]button  
twice and enterthe 3 digitchannel number  
1
5
9
2
6
0
3
7
4
8
2 Using the P+/- buttons  
Press the P+ button to select a channel number in number  
increasing direction.  
Press the P- button to select a channel number in number  
decreasing direction.  
Select the desired sound  
Press the V-/+ buttons on the remote or the front of the  
TV set to adjust the volume level. The range is 0~99. When  
the volume buttons are pressed the volume level is  
displayed automatically on the TV screen.  
P+  
MENU  
V-  
V+  
P-  
If the colour or sound of a channel is abnormal  
Usually this shouldbe set inthe  
Auto position. Howeverif the  
colours displayed onthe screen  
TUNE  
are incorrect youcan manually  
COLOUR  
SOUND  
BAND  
AUTO  
BG  
VHFL  
OFF  
0
select the correctcolour system.  
When finish rememberto turn it  
back to autoagain so thatother  
programs will stillwork correctly.  
To select the colourchange  
option press theMENU button  
on the remotecontrol.  
SKIP  
PROGRAM  
SEARCH  
FINE TUNE  
AUTO SEARCH  
P+  
If picture colour is abnormal  
Use the P+/- buttons to select Colour then the  
V-/+ buttons to change between Auto, PAL, NTSC,  
SECAM and NTSC443. Press the EXIT button to save  
MENU  
V-  
V+  
P-  
the setting.  
If the picture sound is abnormal  
Use the P+/- buttons to select Sound then press the  
V-/+ buttons to select the sound system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV continued  
Swapfunctionenablesquickswaptothelastwatchedprogram.  
Auto scan function enables automatic successive scanning of all the programs in  
memorywith "OFF"skipstatus(eachchannelwilllastabout2seconds).  
Program swap and auto scan functions  
Program swap  
1 Suppose the channel number  
you used just now is 8 and the  
channel number you are using  
is 18 (as shown in the figure).  
18  
AUTO  
DK  
8
AUTO  
DK  
2 If you want to return to the  
last watched program channel  
8, you can simply press the  
SWAP button.  
SWAP  
18  
AUTO  
DK  
3 If you want to return to  
channel 18, press the button  
again. Through this function,  
you can easily change  
between the channel you are  
using and the channel you  
used last time.  
Auto program scan  
1 If you want to select a desirable program, you may scan all  
the TV programs in memory. You can simply press the  
SCAN button to do this. The program numbers will appear  
one after another from beginning to end (each channel  
number will last about 2 seconds).  
SCAN  
2 If you want to stop the function during auto scanning, simply  
presstheSCAN button again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching channel  
This TV set has three methods to set the channels, which are respectively full  
automatic, semi automatic and manual fine tune.  
-
In this section, how to use the remote control to set the channel is explained. You  
can also use the buttons on the TV set to set channel.  
Full automatic mode  
1 Press the MENU menu button ,  
till the TUNE menu shown on  
TUNE  
COLOUR  
SOUND  
BAND  
AUTO  
BG  
VHFL  
OFF  
0
the right display on the screen.  
SKIP  
PROGRAM  
SEARCH  
FINE TUNE  
AUTO SEARCH  
P+  
MENU  
V-  
V+  
2 Press the P+/- buttons to  
select "AUTO SEARCH".  
P-  
TUNE  
COLOUR  
SOUND  
BAND  
AUTO  
BG  
VHFL  
OFF  
0
SKIP  
PROGRAM  
SEARCH  
FINE TUNE  
AUTO SEARCH  
3 Press the V+ button to  
P+  
ensure automatic search  
function operates. All channels  
now playing program will be  
automatically preset in order .  
After the search has finished,  
the first program number will  
display on the screen.  
MENU  
V-  
V+  
P-  
Display function  
CALL  
Press the CALL button, then  
the channel number and the  
systems will be displayed on  
the screen.  
4
AUTO  
DK  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching channel  
Continued  
Semi-automatic search  
Semi-automatic search  
1 Press the P+/- buttons or  
PROGRAM NUMBER 0-9  
buttons to choose desired  
channels I.E. channel 1  
1
AUTO  
DK  
P+  
2 Press the TUNE menu button ,  
till the TUNE menu shown on  
the right display on the screen.  
MENU  
V-  
V+  
P-  
3 Press the P+/- buttons to  
select " SEARCH".  
TUNE  
COLOUR  
SOUND  
BAND  
AUTO  
BG  
VHFL  
OFF  
0
SKIP  
PROGRAM  
SEARCH  
FINE TUNE  
AUTO SEARCH  
P+  
MENU  
V-  
V+  
4 Press the V-/+ buttons to  
1
start searching.  
P-  
The V- down button is used  
for lower side program search.  
The V+ up button is used for  
higher side program search.  
Repeat this step, till find the  
desired channel.  
To turn off the on-screen menu  
In general, after you press the MENU button, the menu item  
display (PICTURE, TIME, FUNCTION, TUNE, EXCHANGE,  
ETC.) will automatically disappear within 15 seconds. If you  
want to eliminate these contents immediately, please press  
the EXIT button.  
EXIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching channel  
Continued  
Manual fine tune  
Manual fine tune  
If the picture and/or sound are poor, try using the FINE  
TUNE feature. Do not use this feature unless  
reception is poor.  
1 Press the P+/- buttons or  
PROGRAM NUMBER 0-9  
button to choose desired  
channels I.E. channel 1  
1
AUTO  
DK  
P+  
MENU  
V-  
V+  
P-  
2 Press the MENU menu button ,  
till the TUNE menu shown on  
the right display on the screen.  
3 Press the P+/- buttons to  
select " FINE TUNE".  
TUNE  
COLOUR  
SOUND  
BAND  
AUTO  
VHFL  
OFF  
0
SKIP  
PROGRAM  
SEARCH  
FINE TUNE  
AUTO SEARCH  
P+  
4 Press the V-/+ buttons all  
through to carry out fine tune,  
till the best picture and sound  
are obtained.  
MENU  
V-  
V+  
1
P-  
FINE TUNE  
VHFL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching channel  
Continued  
Program skip  
Program skip  
The Program skip feature enables you to skip/hide  
programs that you do not wish to be displayed when  
using the P+/- buttons. These channels will still be  
displayed by directly using the channel number  
buttons on the remote control.  
1 Press the P+/- buttons or  
PROGRAM NUMBER 0-9  
button to choose desired  
channels I.E. channel 1  
1
AUTO  
DK  
P+  
MENU  
V-  
V+  
2 Press the MENU menu button ,  
till the TUNE menu shown on  
the right display on the screen.  
P-  
TUNE  
COLOUR  
SOUND  
BAND  
AUTO  
BG  
VHFL  
OFF  
0
3 Press the P+/- buttons to  
select "SKIP".  
SKIP  
P+  
PROGRAM  
SEARCH  
FINE TUNE  
AUTO SEARCH  
MENU  
V-  
V+  
4 Press the V-/+ buttons to  
turn the SKIP function "ON".  
P-  
TUNE  
COLOUR  
SOUND  
BAND  
AUTO  
BG  
VHFL  
ON  
5 Press the TUNE button to close  
the menu. When you use the P+/-  
buttons to select channel, this  
channel will be skipped. However,  
you can still use the PROGRAM  
NUMBER buttons to select the  
skipped channel numbers.  
SKIP  
PROGRAM  
SEARCH  
FINE TUNE  
AUTO SEARCH  
0
P+  
If you want to recover the skipped channel  
MENU  
V-  
V+  
1 Use the PROGRAM NUMBER buttons to select the channel  
number to be recovered.  
2 Repeat those steps just now.  
P-  
3 Press the V-/+ buttons to turn the SKIP function "OFF".  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Convenient picture and sound control functions  
Multiple picture modes  
How to select picture modes  
You can quickly select the desired picture mode from  
four preset modes and one customized mode.  
STANDARD  
P.STD  
Press the P.STD button to select the  
RICH  
desired picture quality. Five kinds  
of picture modes (i.e., "STANDARD",  
USER  
"RICH", "USER","LISTEN",  
LISTEN  
"SOFT" ) can be selected in turn.  
SOFT  
The 5 modes are  
Listen-This is a new feature that blacks out the TV  
screen when listening to music only channels;  
Soft-Designed for night time low light viewing;  
Standard -Designed for rooms that have good all round  
lighting;  
Rich-Designed for rooms with high ambient lighting such  
as daytime sport;  
User-A spare setting that can be adjusted to personal  
tastes.  
How to customize your own picture status  
1 Press the MENU menu button , till the PICTURE menu  
shown on the right display on the screen.  
P+  
MENU  
V-  
V+  
2 Press the P+/- buttons to  
PICTURE  
select the item to adjusted,  
then press the V-/+ buttons  
to obtain the desired effect.  
CONTRAST  
BRIGHTNESS  
COLOUR  
SHARPNESS  
*HUE  
48  
32  
48  
40  
60  
P-  
BLACK STRETCH OFF  
I T E M  
Press V-  
Press V+  
Strong  
Weak  
CONTRAST  
BRIGHTNESS  
COLUOR  
P+  
Bright  
Dark  
MENU  
V-  
V+  
Deep  
Shallow  
Soft  
Sharp  
SHARPNESS  
P-  
lean to green  
lean to purple  
*Hue  
Note:  
The "Hue" item only appears when the colour system is NTSC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Convenient picture and sound control functions  
Continued  
Black Stretch-(Automatically Increases the Contrast Rage)  
Noise Reduce - (Picture Noise & Grain Reduction Circuit. Only use on poor reception.)  
Black stretch and noise reduce  
How to select BLACK STRETCH  
1 Press the MENU menu button ,  
till the PICTURE menu shown on  
PICTURE  
the right display on the screen.  
CONTRAST  
BRIGHTNESS  
COLOUR  
48  
32  
48  
40  
60  
P+  
SHARPNESS  
*HUE  
MENU  
V-  
V+  
BLACK STRETCH OFF  
2 Press the P+/- button to  
select "BLACK STRETCH".  
P-  
PICTURE  
CONTRAST  
BRIGHTNESS  
COLOUR  
SHARPNESS  
*HUE  
48  
32  
48  
40  
60  
3 Press the V-/+ buttons to  
turn the BLACK STRETCH  
function "ON" or "OFF".  
BLACK STRETCH ON  
How to select NOISE REDUCE  
1 Press the MENU menu button,  
till the FUNCTION menu shown  
FUNCTION  
on the right display on the screen.  
ENGLISH  
P+  
BACKGROUND  
ON  
ON  
ON  
ON  
MENU  
V-  
V+  
NOISE REDUCE  
FADE  
AVL  
P-  
CALENDAR  
2 Press the P+/- buttons to  
select "NOISE REDUCE".  
FUNCTION  
ENGLISH  
BACKGROUND  
NOISE REDUCE  
FADE  
AVL  
CALENDAR  
ON  
ON  
ON  
ON  
3 Press the V-/+ buttons to  
turn the NOISE REDUCE  
function "ON" or "OFF".  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Convenient picture and sound control functions  
Continued  
Mute function  
Sound mute  
1 Press the MUTE button on the  
remote control and "MUTE" type  
MUTE  
face will display on the lower part  
of the screen. At this time, the  
sound of the TV set is turned off.  
MUTE  
2 If you want to recover the sound,  
press the MUTE button again or  
directly press the V-/+ buttons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Time functions  
Clock setting and timer on/off functions  
Clock setting  
The clock will only work if the TV set if left turned on  
or in standby. When the set is disconnect from the  
power supply or is turned off by the main power on  
the front panel, the clock losespower and willneed to  
be reset when the power is reconnected.  
TIME  
1 Press the TIME menu button,  
and the TIME menu display on  
the screen.  
TIME  
CLOCK  
17:18  
18:00  
1
--:--  
0
2Press the P+/- buttons select  
"CLOCK", then press the V -/+  
buttons to adjust the time in  
hour position; press again the  
P+/- buttons to select the time  
in minute position, then press  
the V-/ +buttons to adjust the  
value of minutes .  
ON TIME  
ON PROG  
OFF TIME  
SLEEP TIMER  
REMIND TIME  
REMIND PROG  
P+  
MENU  
V-  
V+  
--:--  
1
P-  
On/off timer  
Using on/off timer function, the TV set can automatically  
turn on to a preset program or shut down in a preset time.  
TIME  
1 Press the TIME menu button  
to call up the TIME menu on the  
screen.  
TIME  
CLOCK  
ON TIME  
ON PROG  
OFF TIME  
SLEEP TIMER  
REMIND TIME  
REMIND PROG  
17:18  
18:00  
1
--:--  
0
2 Press the P+/- buttons to  
select "ON TIME", then press  
the V -/+ buttons to set the  
value in hour position; press  
again the P+/- buttons to select  
the minute position and set the  
value of the minute.(take 18:00  
as an example)  
--:--  
1
P+  
MENU  
V-  
V+  
TIME  
CLOCK  
ON TIME  
ON PROG  
OFF TIME  
SLEEP TIMER  
REMIND TIME  
REMIND PROG  
3 Press the P+/- buttons to  
select "ON PROG", then press  
the V-/+ or program direct  
number buttons to select your  
desired channel (take 8 as an  
example).  
P-  
17:18  
18:00  
8
23:00  
0
--:--  
1
4 Repeat step 1-2 to set OFF  
TIME.(take 23:00 as an example)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Time functions  
Continued  
Sleep timer and program preset  
Sleep timer  
The TV set have 18 sections  
0
option for sleep timer function  
(each section has a time  
interval of 10 minutes) (See right  
chart):  
10  
20  
TIME  
170  
180  
1 Press the TIME menu button,  
and the TIME menu display on  
the screen.  
TIME  
CLOCK  
ON TIME  
ON PROG  
OFF TIME  
2 Press the P+/- buttons to  
select "SLEEP TIMER".  
17:18  
18:00  
8
23:00  
120  
--:--  
1
P+  
3 Press the V-/+ buttons to  
MENU  
SLEEP TIMER  
V-  
V+  
adjust the SLEEP TIMER level. REMIND TIME  
REMIND PROG  
P-  
REMIND PROG function  
Program remind timer, that displaysan on-screen reminder  
prompt, when aprogram on adifferent channel is due tostart.  
TIME  
1 Press the TIME menu button  
to call up the TIME menu on the  
screen.  
TIME  
CLOCK  
ON TIME  
ON PROG  
OFF TIME  
SLEEP TIMER  
REMIND TIME  
REMIND PROG  
17:18  
18:00  
8
23:00  
120  
2 Press the P+/- buttons to  
select "REMIND TIME", then  
press the V -/+ buttons to set  
the value in hour position;  
press again the P+/- buttons to  
select the minute position, and  
then set the value of the  
minute.(take 19:00 as an  
example)  
19:00  
1
P+  
MENU  
V-  
V+  
3.Press the P+/- buttons to  
select "REMIND PROG", then  
press the V-/+ buttons or the  
program direct number buttons  
to set the desired channel  
(take 18 as an example).  
TIME  
CLOCK  
ON TIME  
ON PROG  
OFF TIME  
SLEEP TIMER  
REMIND TIME  
REMIND PROG  
17:18  
18:00  
8
23:00  
120  
P-  
19:00  
18  
NOTE: For REMIND PROG to  
operate CHILD LOCK must be  
turned off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set up function  
Screen saver and childlock functions  
How to start screen saver function  
When the BACKGROUD function  
is ON, the screen will turn  
automatically as shown "NO  
SIGNAL" of moving ( black  
background).  
NO SIGNAL  
1 Press the MENU menu button  
,
till the FUNCTION menu shown  
on the right display on the screen.  
P+  
FUNCTION  
ENGLISH  
BACKGROUND  
NOISE REDUCE  
FADE  
2 Press the P+/- buttons to  
MENU  
V-  
V+  
ON  
ON  
ON  
ON  
select "BACKGROUND" and press  
the V-/+ buttons to turn the  
AVL  
CALENDAR  
P-  
BACKGROUND function "ON" .  
P+  
MENU  
V-  
V+  
P-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set up function  
Continued  
AVL and calendar functions  
AVL function  
Automatic Volume Limit control reduces effect of large  
volume changes such as when the ads come on.  
1 Press the MENU menu  
button till the FUNCTION menu  
,
shown on the right display  
on the screen.  
FUNCTION  
ENGLISH  
BACKGROUND  
NOISE REDUCE  
FADE  
ON  
ON  
ON  
ON  
AVL  
CALENDAR  
P+  
MENU  
V-  
V+  
2 Press the P+/- button to select  
"AVL" .  
P-  
FUNCTION  
ENGLISH  
3 Press V-/+ button to turn the  
BACKGROUND  
NOISE REDUCE  
FADE  
AVL  
CALENDAR  
ON  
ON  
ON  
ON  
AVL function "ON" or "OFF"  
.
Calendar function  
Enables the TV sets internalcalendar to beset.  
1 Press the MENU menu  
button till the FUNCTION menu  
,
shown on the right display on the  
screen.  
FUNCTION  
ENGLISH  
BACKGROUND  
NOISE REDUCE  
FADE  
ON  
ON  
ON  
ON  
2 Press the P+/- button to select  
"CALENDAR" , then press the  
V-/+ buttons to the CALENDAR  
display on the screen.  
AVL  
CALENDAR  
P+  
MENU  
V-  
V+  
P-  
3 Press the V+/- buttons to turn  
the YEAR/MONTH/DAY, press  
P-/+ buttons to set or adjust  
the YEAR/MONTH/DAY.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set up function  
Continued  
Fade  
Fade  
The FADE control allows time for the picture tube to  
warm up and gently turned on, which can help prolong  
the life of the picture tube.  
1 Press the MENU menu button  
till the FUNCTION menu shown  
on the right display on the  
screen.  
,
FUNCTION  
ENGLISH  
BACKGROUND  
NOISE REDUCE  
FADE  
ON  
ON  
ON  
ON  
P+  
AVL  
CALENDAR  
MENU  
V-  
V+  
P-  
2 Press the P+/- buttons to  
select "FADE .  
3 Press the V-/+ button to turn  
FUNCTION  
ENGLISH  
the FADE function "ON" or "OFF"  
.
BACKGROUND  
NOISE REDUCE  
FADE  
AVL  
CALENDAR  
ON  
ON  
ON  
ON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Position exchange functions  
Exchange  
Exchange  
This feature enables TV programs that may be on a wrong TV  
channel number to be swapped/exchanged. This feature is  
very useful when Automatic Search Tuning has been used, to  
reallocate the found programs to the correct channel numbers.  
P+  
1 Press the MENU button again  
(6 times) till the EXCHANGE  
,
menu display on the screen.  
MENU  
V-  
V+  
EXCHANGE  
PROGRAM 1  
PROGRAM 2  
EXCHANGE  
6
2
P-  
2 Press the V-/+ buttons or the  
PROGRAM NUMBER 0-9  
buttons to set PROGRAM 1 TO 6.  
P+  
3 Press the P-/+ buttons to  
select " PROGRAM 2".  
MENU  
V-  
V+  
4 Press the V-/+ buttons or  
P-  
the PROGRAM NUMBER 0-9  
buttons to set PROGRAM 2 TO 9.  
EXCHANGE  
PROGRAM 1  
PROGRAM 2  
EXCHANGE  
6
9
5 Press the P+/- buttons to  
select "EXCHANGE".  
P+  
MENU  
V-  
V+  
6 Press the V-/+ buttons to set  
"EXCHANGE".  
P-  
EXCHANGE  
PROGRAM 1  
PROGRAM 2  
EXCHANGE  
6
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback  
Basic Playback  
Preparations  
Stop playback  
Press the DVD/TV button on the remote control  
1. Press STOP  
button to go to stop mode, the TV  
or the TV to turn on the DVD player.  
screen will show the start logo. For some discs the  
player can recall the location where stopped, such  
as DVDs and audio CDs.  
Basic playback  
2. Press PLAY/ENTER to resume play-back from the  
location where playback was stopped.  
3. Press STOP twice to stop completely.  
Play must thenresume from thetitle beginning.  
1. Press OPEN/CLOSE to open the disc tray,  
place a disc on the disc tray.  
There are two different disc sizes. Place the  
disc in the correct guide on the disc tray. If the  
disc is out of the guide, it may damage the disc  
and cause the DVD player to malfunction.  
Do not place a disc which is unplayable in this  
DVD player (see "Playable discs").  
Previous and Next  
During Playing, pressing the PREV  
keywill  
restart the currentchapter and skip chapters  
backwards with each subsequent press until the  
start of thedisc is reached.  
Each press ofNEXT  
skip the currentchapter and play the next one.  
2. Press OPEN/CLOSE to close the disc tray, the  
playback will automatically start.  
key duringplaying will  
Some discs do not start automatically. Press  
PLAY/ENTER tostart playback.  
In the caseof CD audio and photo discsthe next  
track, song orphoto is selected.  
3. Some discs may start playback with a menu. Use  
the cursor buttons on the remote control to select  
menu options and press PLAY/ENTER to start. You  
may also press the digit buttons to select a menu  
option directly. Many DVDs will not allow this during  
start-up.  
Fast forward and Fast reverse  
1. Press FWD  
to fast forward through the disc.  
button is pressed, the  
Each time the FWD  
fast forward motion speed changes.  
2. Press PLAY/ENTER to resume normal playback.  
Pause playback  
3. Press REV  
to fast reverse through the disc.  
button is pressed, the  
Each time the REV  
1. Press PAUSE/STEP to pause playback (still mode).  
The sound will be muted during still mode.  
fast reverse motion speed changes.  
4. Press PLAY/ENTER to resume normal playback.  
2. Press PLAY/ENTER to resume normal playback.  
Single step playback  
1. When paused, press PAUSE/STEP repeatedly  
to single step forward frame by frame in the video.  
2. Press PLAY/ENTER to resume normal playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Playback  
Advanced Playback  
IMPORTANT NOTE:  
ALL DESCRIBED FUNCTIONS ARE FOR DVD DISCS. There will be some differences for other kinds of disc.  
PROGRAM  
SUBTITLE  
When playing discs, press "PROGRAM" to enter  
program mode. Starting with program number "01"  
highlighted, press the digit buttons to select the title  
and chapter number that you want. When finished  
move the cursor to select "START" . This will start  
the program playback.  
Press " SUBTITLE ", the screen will display "SUBTI-  
TLE 01/XX XXXXX", "01" indicates the ordinal  
number of this language; "XX" indicates total number  
of language; "XXXXXX" indicates the language of  
country. (the number of language depends on disc).  
This function can select up to 32 languages display-  
ed on screen.  
SEARCH  
REPEAT  
Press " SEARCH " once to display Disc Go To --:--,  
use numeric key to enter the desired time of Disc.  
Press " SEARCH " twice to display Track Go To --:--,  
use numeric keys to enter the desired time of track.  
Press " SEARCH " 3 times to display Select Track  
--/03, use numeric keys to enter the desired track.  
Press " REPEAT " and Chapter repeat will be  
displayed on screen, the second press will display  
Title repeat, the third press will display All repeat,  
the fourth press will cancel this function.  
SLOW  
A-B  
Press SLOW to play a disc in slow forward. Each  
time the SLOW button is pressed, the slow  
motion speed changes.  
Press A-B to select the Start point. Press  
again to select the End point. A third press  
will cancel the function.  
Press PLAY/ENTER to resume normal playback;  
Note: This function is invalid for CD.  
ANGLE  
TITLE/PBC  
When enjoying sports, concert or theatre, press this  
key to watch same actions in different angles. (Valid  
for discs possessing this function) Using a disc  
recorded in multi-angle you can view the scene from  
different angles, for example, front, side, whole view  
and exterior scene.  
With some DVD discs pressing this key will display  
the title menu. You can then use the digit buttons  
to select the item you prefer.  
AUDIO  
D.MENU  
Press this key can change the audio mode.  
such as: Audio 1/2: AC 3 2 CH English  
Audio 2/2: AC 3 5.1 CH English  
Press this key to display root menu,select item  
according to your preference. (This function will work  
with a DVD having a multi-layer menu.)  
For CD audio, press this button to cycle between  
Mono Left, Mono Right, Mix-Mono and Stereo.  
Note: When press this button continuously, you must  
above 3 seconds interval.  
D.CALL  
Pressing this key will cycle through "title elapsed",  
"title remain", "chapter elapsed", "chapter remain"  
and "display off ". Each displays the appropriate  
time information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Function Playback  
JPEG DISC PLAYBACK  
When a disc containing standard JPEG picture files is inserted into the player, a  
navigation menu will be displayed automatically. Use the UP and DOWN cursor  
buttons to select a file then press PLAY/ENTER. The slide show will commence.  
Press PREVIOUS orNEXT to move between pictures. Press pause to stop on the  
current picture. Press PLAY/ENTER to resume normal playing.  
JPEG disc contains with JPG-format picture information which can be decoded by micro-  
computer software and output through video output interface for enjoying on TV screen.  
Such function can be used in many domains. For example, in education, teachers can  
change those pictures for class into JPG-format file by digital camera or scanner, which is  
commonly used in computer, and record them into CD-R disc through disc recorder. It  
will be convenient for and direct to the students when teachers play the disc by TV set  
or other equipment in class. That reduces teachers' repetition work and good for  
reservation (information in disc can be reserved for more than 100 years); in family, users  
can record pictures which formed by digital camera or scanner into CD-R disc. Suppose  
one picture occupies about 100K bytes, then one disc may record about 6000 pictures;  
in commerce, manufacturers can show the products pictures one by one to consumers.  
NOTE: The actual content will be different as per disc.  
SCREEN SAVER FUNCTION  
This unit employs a screen saver mode to help protect the tube during static video  
pictures. This can be turned off on the GENERAL SETUP PAGE (see Pg. 26)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup  
DVD System Setup  
General Setup Process  
1.Press the SETUP button, the  
General Setup Page,Preference  
Page will be displayed in turn.  
SETUP  
..General Setup Page..  
.
3:Ps  
.
3:Lb  
TV Display  
Angle Mark  
Osd Lang  
Caption  
LB  
On  
4
4
ENG  
On  
16  
9
2.Press to select the  
or  
item,then press to enter the  
submenu.  
Screen Saver Off  
..Preference Page..  
or  
3.Press to setup,then  
press PLAY/ENTER to confirm.  
PAL  
AUTO  
NTSC  
TV Type Auto  
Parental  
PLAY/ENTER  
Password  
Default  
4.Press SETUP button to exit  
the menu.  
General Setup Page  
ASPECT RATIO DESCRIPTION  
When using the DVD with the internal TV,  
select 4 3/LB.  
..General Setup Page..  
The following information applies only  
when the DVD output is connected to an  
external TV.  
.
3:Ps  
.
3:Lb  
TV Display  
Angle Mark  
Osd Lang  
Caption  
LB  
On  
4
4
ENG  
On  
16  
9
Screen Saver Off  
4
3/PS (PS = Pan and Scan)  
SETUP  
You may select if you have a normal aspect  
ratio (4:3) TV, although the NORMAL/LB  
(letter box) is a more common choice. In PS  
mode, widescreen material will fill the screen, but at the expense of chopping  
off extreme left and right edges of the original film picture. For this feature to  
work, the disc must be specially coded. Such discs are uncommon.  
4
3/LB (LB = Letter Box)  
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen  
material will be shown in pure unaltered form, allowing the entire picture area  
of the original film to be viewed without any side cropping. Black bars will  
appear above and below the picture.  
PLAY/ENTER  
16  
9
You may select this if you have a widescreen (16:9) TV. Back bars may still  
appear above and below the picture even if using a widescreen TV. This is  
because some film directors prefer to use ultra widescreen aspect ratios e.g.  
2.35:1. This will normally be indicated on the DVD packaging.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup(Continued)  
DVD System Setup  
General Setup Page  
ANGLE MARK: Users can select a particular  
.
camera angle when playing a DVD which offers  
multiple angles.  
This item allows you to set Angle Mark ON or OFF.  
..General Setup Page..  
TV Display  
Angle Mark  
Osd Lang  
Captions  
LB  
On  
On  
Off  
ENG  
On  
Screen Saver Off  
On Screen Display (OSD) Language: The  
TV on-screen display language is English.  
..General Setup Page..  
TV Display  
Angle Mark  
LB  
On  
Osd Lang  
Captions  
ENG  
On  
On  
Off  
Screen Saver Off  
CAPTIONS: This functionallows you to display or hide the caption.  
..General Setup Page..  
TV Display LB  
Angle Mark On  
Osd Lang  
Captions  
ENG  
On  
On  
Off  
Screen Saver Off  
SCREEN SAVER: If the screen saver is on,then there  
will be an animated picture of DVD on the screen  
whenever the DVD player is idle for more than 3  
minutes .  
..General Setup Page..  
TV Display  
Angle Mark  
LB  
On  
Osd Lang  
Caption  
ENG  
On  
Screen Saver Off  
On  
Off  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup(Continued)  
DVD System Setup  
Preference Page  
The Preference Page is only available when there is no disc  
in the player. These settings are applied consistently to all  
discswhichareinsertedandplayed.  
..Preference Page..  
TV TYPE: This player  
supports different TV output,  
including MULTI(Auto),  
NTSC, and PAL systems.  
Usually please set to MULTI.  
PAL  
AUTO  
NTSC  
TV Type Auto  
Parental  
Password  
Default  
SETUP  
PARENTAL: The parental  
control function works in  
conjunction with the  
different censorship classes  
assigned to DVDs. These  
classes help to control the  
types of DVDs that the family  
watches, There are up to 8  
censorship classes for DVDs.  
..Preference Page..  
TV Type Auto  
Parental  
1 Kid Saf  
2 G  
3 Pg  
Password  
Default  
PLAY/ENTER  
4 Pg 13  
5 Pgr  
6 R  
7 Nc17  
8 Adult  
Note:  
1 To change this setting you must enter your password.  
(Initial password is 1234)  
2 When set to OFF, all discs may be viewed.  
PASSWORD CHANGE:  
You can change your password  
..Preference Page..  
by entering 4 digits. Your must  
confirm the 4 digits before the  
new password can be accepted.  
TV Type Auto  
Parental  
Password  
Default  
Change  
Old Password  
New Password  
Confirm PWD  
NOTE:If you forgetyour password  
or a password is accidentally set  
enter 1369 as the password. This  
will enable you to regain control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup(Continued)  
DVD System Setup  
DEFAULT: Resets all settings  
(except password and parental  
lock status) for this DVD player  
back to the manufacturers  
original settings. Press ENTER  
to perform the reset.  
..Preference Page..  
SETUP  
TV Type Auto  
Parental  
Password  
Default  
Reset  
PLAY/ENTER  
Note:  
Some functions may not be available depending on the type of disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playable Discs  
The following discs can be played:  
You cannot play discs other than those listed above.  
You cannot play discs of non-standardized discs, even if they may be labelled as above.  
The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few cases,  
their performance may be not very well or even no performance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Protection and DVD Characteristics  
Compare DVD disc with other discs:  
DVD  
LD  
SVCD  
VCD  
CD  
Digital/  
MPEG I  
Encode  
method  
Digital/MPEG  
Digital  
Digital  
Analog  
Single- Double Single- Double-  
side  
-side  
side  
side  
650MB  
650MB  
650MB  
Capacity  
single- single double- double-  
layer  
4.7G  
-layer layer  
layer  
17G  
8.5G  
9.4G  
Single-side  
60 minutes  
double-side  
120 minutes  
133  
minutes minutes minutes minutes  
242  
266  
484  
45 minutes 74 minutes 74 minutes  
Playing Time  
Disc diameter  
12cm/8cm  
30cm/20cm  
12cm  
12cm  
12cm/8cm  
No more than  
430 line  
Horizontal  
resolution  
No more than No more than  
More than 500 line  
350 line  
250 line  
Picture  
proportion  
One kind  
One kind  
Multiple kinds  
32 kinds  
One kind  
16 kinds  
at most  
Subtitle  
4 kinds  
4 kinds  
at most  
4 kinds  
at most  
Language  
2 kinds  
2 kinds  
8 kinds  
48KHz, 96KHz/  
6, 20, 24bit  
44.1KHz/  
16bit  
44.1KHz/  
16bit  
44.1KHz/  
16bit  
44.1KHz/  
16bit  
Sound quality  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the TV set to the other video and audio equipment  
Connecting to the other video and audio equipment  
You can connect a stereo to theAUDIO output terminals on the TV set to enjoy sounds of  
higher quality. VIDEO andAUDIO output terminals output the video and audio signals being  
monitoredbytheTVset. Theelectriclevelsofvideoandaudiooutputsignalsarefixed.  
TV EXT  
To TV EXT  
To TV EXT  
To outside input  
To video/audio input  
DVD, VCD and other reproducing equipment  
Stereo  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting guide  
To assist in location possible faults use help guide below.  
BREAKDOWN PHENOMENON  
CHECKING  
PICTURE  
SOUND  
The aerial direction and connection  
Picture with snow  
Double or Triple Image  
Disturb  
Noise  
This is called ghosting which can be minimized  
with an outside aerial, and good quality cable  
and terminations. Altering the aerial direction  
can also minimize this effect.  
Normal  
Noise  
Electrical interference which can be caused by cars,  
motorbikes etc, Fluorescent lamps and dirty  
insulators on overhead power cables.  
1. Volume Sound mute.  
2. Only 1 speaker has no sound. Press S.STD button to  
choose USER mode, then check wether the BALANCE  
item value in SOUND menu equal to 0. Adjust the  
BALANCE item in SOUND menu as you wish in USER  
mode.  
No sound or 1  
speaker no sound  
Normal  
Ensure that the power supply is connected to the TV  
set and turned on. Also ensure that the TV set isnot  
in "Listen Mode" or that the brightness and contrast  
are not turned down.  
No sound  
No Picture  
Adjust colour control  
Adjust channel again  
Normal volume  
Normal or Weak Volume  
No colour  
Scramble  
Colour Purity faultwhich can becaused by movingthe  
TV set, placingmagnets near theTV screen orturning  
on/off house holdappliances such asvacuum cleaners  
near the TVset. Turnthe TV off with themains power  
switch for 15minutes. When thepower is turnon again  
the TV setwill automatically degaussthe picture. In  
server cases leavethe TV setturned off overnight.  
Colour Spot  
Normal volume  
Note:  
1.If the fault can not be repaired using the above guide consult with your local authorized service  
center.  
2.The TV set must only be repaired by a qualified registered service person. Never attempt to  
remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.  
3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the  
materials in the cabinet expanding with room temperature changes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
The specifications offered you here are only for reference and, with the improvement  
of the products ,there may be some different between the description and the practicality.  
Specifications  
Colour system  
Sound system  
Picture tube  
PAL,SECAM,AV NTSC  
BG,DK  
14"colour picture tube (33.5cm viewable)  
2X2W 10% THD  
Sound output power  
Power requirements  
Power consumption  
Dimension  
AC 110V-250V  
70W  
50Hz  
368 Width x378 Depth x371 Height  
mm  
Remote control  
Owner's manual  
Battery(AA)  
X1  
X1  
X2  
Accessories  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01  
0090504962  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Marine Sanitation System 312375J User Manual
Greenheck Fan Ventilation Hood TCB User Manual
Hans Grohe Plumbing Product 04065XX0 User Manual
Harbor Freight Tools High Chair 90849 User Manual
Harbor Freight Tools Saw 93827 User Manual
Harrington Hoists Chainsaw Sharpener 10 2 AH250 AH500 Main Body User Manual
Heat Glo LifeStyle Gas Heater 6000XLSB User Manual
HP Hewlett Packard Personal Computer 23 C130 User Manual
HP Hewlett Packard Printer 240A User Manual
Ikelite Indoor Furnishings AF35 User Manual